Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 127/391 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • Network flooded with seemingly empty packets

    - by Adam Particka
    Let me preface this with the fact that I'm just a web developer at my company with little networking knowledge. Earlier today there was a department that lost all of their network connections so I popped open Wireshark and observed the influx of packets to my machine. There was normal traffic (ARP requests, etc.) coming in at ~50 packets every second. Then all of a sudden the log was flooded with packets arriving ~5000 a second. It looks as though they all contain the same data, just a looped sequence. We have someone here looking at it but I thought I would ask if anyone had seen anything like this before. Here's a selection from one of the captures in Wireshark. http://www.cloudshark.org/captures/06f950725c74

    Read the article

  • Make my web-server traffic go through proxy?

    - by Eli
    I have a question that may or may not be possible. Basically Comcast isn't going to let me host a website on their ISP unless I have a business account. So, I spoke with my uncle who is big into networking and he told me to host my website through a proxy so Comcast cannot associate the website IP with my IP. I have purchases a proxy from proxy-hub.com, but I cannot seem to figure out what to do next. I may be approaching this totally wrong and I may need to create my own proxy server. Anybody have a clue? Thanks.

    Read the article

  • enable tcp_syncookies even after reboot

    - by Tim
    I'm running Scientific Linux 6.1 and would like to set net.ipv4.tcp_syncookies=1. I've set that in /etc/sysctl.conf and, if I do a sysctl -p then sysctl -q net.ipv4.tcp_syncookies it shows it's properly set. Sadly, if I reboot the machine, and sysctl -q again, it goes back to 0. I've tried to grep around and see if something else is resetting it to 0 during the boot process but haven't turned up anything. I've googled and everything points to sysctl.conf. The only thing I can think of is maybe networking isn't up by the time that file gets read but, honestly, I'm a developer and well beyond my natural skills here:) I'm tempted to just set it directly in /etc/init.d/network but then that feels hackish and so, I thought better of it and I'm here in search of the "right" way to do it. Any pointers?

    Read the article

  • Why can a network address not be a valid host address?

    - by Goblinlord
    So... I have studied for CCNA and such and been working with IP networking at the least the past 8 years or so. I have always seen and been told that the network address for a subnet is not a valid host address. Now first I will start by saying I know this is true. My question is more... is there a technical reason it can not be used or was it just arbitrarily agreed upon when the specification was designed? I understand why a broadcast address can not be used (because it is ACTUALLY used). The thing is when I see a network address used it is normally only in routing which is specifically using NETWORK addresses. This being the case, (network addresses being used only when you are expecting a network address) is there some technical reason that they could not have the network address be an actual valid host address?

    Read the article

  • Virtual IP, and Reverse Proxying Ports (Making up terms)

    - by macintosh264
    So here is the exact situation that I have I have 2 game servers in my house. One on port 25565, and the second on 25567. I have only one IP in my house I need to get a "virtual IP" for the second server. Some way of giving the computer that runs these game servers a second IP (linux) I need the Virtual IP to receive connections on 25565 and forward the data to 25567. Although if linux recognizes the second IP in networking I assume I can bind to the second IP on port 25565

    Read the article

  • Resources related to data-mining and gaming on social networks

    - by darren
    Hi all I'm interested in the problem of patterning mining among players of social networking games. For example detecting cheaters of a game, given a company's user database. So far I have been following the usual recipe for a data mining project: construct a data warehouse that aggregates significant information select a classifier, and train it with a subsectio of records from the warehouse validate classifier with another test set lather, rinse, repeat Surprisingly, I've found very little in this area regarding literature, best practices, etc. I am hoping to crowdsource the information gathering problem here. Specifically what I'm looking for: What classifiers have worked will for this type of pattern mining (it seems highly temporal, users playing games, users receiving rewards, users transferring prizes etc). Are there any highly agreed upon attributes specific to social networking / gaming data? What is a practical amount of information that should be considered? One problem I've run into is data overload, where queries and data cleansing may take days to complete. Related to point above, what hardware resources are required to produce results? I've found it difficult to estimate the amount of computing power I will require for production use. It has become apparent that a white box in the corner does not have enough horse-power for such a project. Are companies generally resorting to cloud solutions? Are they buying clusters? Basically, any resources (theoretical, academic, or practical) about implementing a social networking / gaming pattern-mining program would be very much appreciated. Thanks.

    Read the article

  • How to programmatically detect Cipher type and Encryption level from a wireless network device from

    - by amexn
    Now my team working in a network project using windows application c#. I didn't know how to programmatically detect Cipher type and Encryption level from a wireless network device from windows 2003 server. After searching i got WMI (Windows Management Instrumentation) for solving the problem.+ Please suggest example/reference for finding Cipher type and Encryption level from a wireless network device from windows 2003 server

    Read the article

  • Unable to Use Bluetooth Mighty Mouse or Wireless Keyboard with Boot Camp

    - by Kristopher Johnson
    I have Windows 7 64-bit running on a MacBook Pro in a Boot Camp partition. I am trying to pair with my Bluetooth Mighty Mouse and wireless keyboard under Windows, but whenever I try to do so, here's what happens: While on the Add a device window, I turn on the mouse or press a key on the keyboard, and the mouse or keyboard shows up in the list of available devices. I click the device and then the Next button, and the window displays Connecting to device... Time passes. Eventually, I get this error message indicating that the device could not be accessed. The error code is 0x80070015. I've run Windows Update and Apple Software Update.

    Read the article

  • Connecting Wii to router to Proxy Server via VPN to BBC iPlayer

    - by nkimber
    I live in the USA and want to be able to watch UK TV streamed over the web. The relevant services are geographically crippled. I can do this by using a VPN proxy server in the UK, connecting to the VPN service using a straight Windows VPN connection. However, this means I have to watch everything on my PC. The BBC iPlayer works on the Wii in the UK. So, I'd like to connect my Wii to a wireless router (LinkSys WRT54G2) and have that be automatically connected via VPN to my proxy service in the UK. If I can do this then I'd be able to stream UK TV direct to my TV via the Wii. I thought I could have one router act as my VPN connection, connected to a 2nd router that connects to my Cable internet access. But this bit isn't working, any thoughts?

    Read the article

  • Why does my MacBook Pro have long ping times over Wi-Fi?

    - by randynov
    I have been having problems connecting with my Wi-Fi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10 seconds before slowly coming back down. You can see the trend below. I'm on a MacBook Pro and have done the normal stuff (reset the PRAM and SMC, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 and 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

    Read the article

  • Keep getting invalid IP via WiFi

    - by nmuntz
    There is something wrong with my WiFi. I keep getting an invalid IP via DHCP (169.254.x.x), this happens for ALL wifi connections (home, office, etc). If I try a Local Ethernet connection via cable it works fine. I have tried downloading the latest drivers for my wireless adapter, resetting the TCP Stack and still have this issue. One strange thing I notice is under Device Manager, Network Adapters I have 4 "Unknown Devices" and three "Remote NDIS based Internet Sharing Device". My guess is that this belongs to McAfee. Not sure if this is related or not, anyways to try to fix this I tried downloading the NetLUIDfix.exe utility from McAfee but it didn't work. Any ideas how to solve this annoying issue? Thanks!!

    Read the article

  • Ad-hoc connection between iPhone and Macbook Pro

    - by Phil Nash
    I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

    Read the article

  • Why does my macbook pro have long ping times over wifi?

    - by randynov
    I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

    Read the article

  • Multiple vlan issue with procurve switch

    - by Chris-AZ
    I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

    Read the article

  • Automatically repair network connection when it goes down.

    - by Spines
    Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

    Read the article

  • Setting up Dynamic DNS for Wireless Cameras And Accessing them Remotely

    - by Mike Szp.
    I've been trying to set up two TP LINK wireless N cameras that I bought so that I can see them remotely. I've set it up so that each has it's own ip address (192...105/192...106) and I can access them if I type that into the browser of a local computer The thing is that I don't know how to access them from another remote PC. My current setup is a a each camera connected to the router which then connects to the modem. When I set up the Dynamic DNS, and I access the "webpage" for my IP through a remote computer, it just goes to the configuration page of the modem. I have no idea how to make it go to the router or to the cameras. the router has its own ip range of 192.168.1.x while the modem has 192.168.2.x To access the cameras I type into the web browser: 192.168.1.114:100 on the local computer but I have no idea how to get there through the webpage of my Dynamic DNS remotely.

    Read the article

  • Robocopy to a drive connected to a wlan router fails

    - by Ville Koskinen
    I have a wireless router and an USB hard drive connected to it. Basic file access on the command line and Explorer works flawlessly after having set up some options on the router and mapping to some folders with net use k: \\ROUTER\Folder1 /user:MYLAPTOP\Me password /persistent:yes net use n: \\ROUTER\Folder2 /user:MYLAPTOP\Me password /persistent:yes Robocopy (and using SyncToy for that matter) to a network drive however fails: robocopy c:\Files k:\Backup /MIR /Z gives There is not enough space on the disk. 2010/01/05 09:52:11 ERROR 112 (0x00000070) Accessing Destination Directory N:\ Waiting 30 seconds... The error message is misleading: there is plenty of space on the disk and the folders I'm copying are small. The router is an ASUS WL-500gp with a standard firmware. I'd appreciate if someone would be able to explain what is causing the problem and, if possible, how to fix it.

    Read the article

  • MacBook's Airport not working from menu bar

    - by not22
    All of the sudden my MacBook doesn't connect to my wireless after waking from sleep. My network shows up at full signal strength and it remembers the password correctly, but I get an error message when I try to connect from the menu bar. The only way I can get on the internet is to go through Network Diagnostics and turn it on there. I don't understand why it works every time through Network Diagnostics and never on it's own or through the airport menu bar. Nothing has been changed or installed or reset on my computer that I know of. Restarting doesn't fix it, nor does turning off the airport card. Any ideas?

    Read the article

  • TP-LINK TD-W8151N Modem/router as just wi-fi router

    - by Reshma
    I am planning to buy TP-LINK ADSL wifi router (model TD-W8151N) for my Internet connection which provides Internet through ADSL telephone line. I am also planning to take cable internet in a few months which provides internet through a LAN cable without the need of any modem. So I would like to have my modem work for both connections which I am using. When using cable internet I want this TP-Link modem to work just as a wireless router (so that I can have the freedom to use my laptop in different rooms instead of sitting at a place by plugging in that cable). Is it possible to use this modem in that way? I don't have much knowledge about these things except that I can configure things as instructed. Please suggest me whether I should go ahead and buy this one or if there is any other modem in your view which can serve both my purposes, let me know. Operating System I am using: Windows 7

    Read the article

  • Share laptop Wi-Fi with router set up as access point via ethernet cables

    - by obie
    I have an ADSL modem which serves as a wireless router. There's a laptop connected to it through cable. On the other room I have a laptop which is connected through the router wirelessly. Since I have other appliances that need to get connected but are not Wi-Fi capable I have another Wi-Fi router. How can I share the second laptop's Wi-Fi with the second router so that the router can then serve as an access point to give internet to my other appliances through ethernet cables? I want something like this: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV What I've tried so far is opened the admin interface of router 2 then set static IP 192.168.100.13 and disabled the DHCP. The DHCP of the main router starts with 192.168.100.1 then I hooked up router 2 with the laptop 2 through Cat5 cable but for some reason it's not working.

    Read the article

  • Connecting to Aerohive APs from Laptops running Win. 7 using authentication from a Windows 2008 domain server

    - by user264116
    I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

    Read the article

  • Dual mode 802.11n PCI adapters

    - by Mike Thompson
    I have recently bought a DLink DIR-825 router. It is a dual mode (2.4GZ & 5GHZ) 802.11n wireless access point/router. What is a good PCI adapter to pair with it? DLink appear to only make one dual mode adapter, which is the DWA-160 USB adapter. They don't seem to have a PCI adapter in their range, which seems very strange. Do any of the other network manufacturers make a good dual mode adapter?

    Read the article

  • Juniper Networks SRX240 as a office router?

    - by Jordan Mendelson
    We're a small (7 person) fast growing startup who just got our new office and we're having a 100 Mbps line installed from Cogent. I'm not familiar with Juniper devices, however the equivalent Cisco appears to be rather expensive. Features we'd like: Offsite VPN access (PPTP or L2TP IPsec) - something Mac compatible IPv6 support NAT - ideally supporting multiple outside addresses mapped to VLANs DHCP DNS forwarding would be nice QoS to keep our SIP phones happy (managed through RingCentral) VLANs for guest/internal The device is going to be connected to a set of SIP phones as well as two Ruckus 7962s for wireless access. Eventually I'd like to connect it to a Juniper ESX switch as we grow. Would a Juniper SRX240 handle this ok?

    Read the article

  • Wicd not playing well with networks that utilize network access control

    - by Sion
    Starting a couple months ago (might be able to find exact date if necessary) my installation of Wicd stopped being able to see wireless networks that use NAC (Network Access Control) such as Aruba networks. But if I shut down Wicd and start NetworkManager I can connect to said networks and log in to them depending on what the NAC requires. This is the current wicd package installed: net-misc/wicd-1.7.1_pre20111210-r1 This is how I manipulate the network manager running: su -c'/etc/init.d/wicd stop; /etc/init.d/NetworkManager start' What would cause this specific of a problem to occur?

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >