alter index - Page 131 - Developer IT

Routes for IIS Classic and Integrated Mode

- by imran_ku07

Introduction: ASP.NET MVC Routing feature makes it very easy to provide clean URLs. You just need to configure routes in global.asax file to create an application with clean URLs. In most cases you define routes works in IIS 6, IIS 7 (or IIS 7.5) Classic and Integrated mode. But in some cases your routes may only works in IIS 7 Integrated mode, like in the case of using extension less URLs in IIS 6 without a wildcard extension map. So in this article I will show you how to create different routes which works in IIS 6 and IIS 7 Classic and Integrated mode. Description: Let's say that you need to create an application which must work both in Classic and Integrated mode. Also you have no control to setup a wildcard extension map in IIS. So you need to create two routes. One with extension less URL for Integrated mode and one with a URL with an extension for Classic Mode. routes.MapRoute( "DefaultClassic", // Route name "{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); routes.MapRoute( "DefaultIntegrated", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults ); Now you have set up two routes, one for Integrated mode and one for Classic mode. Now you only need to ensure that Integrated mode route should only match if the application is running in Integrated mode and Classic mode route should only match if the application is running in Classic mode. For making this work you need to create two custom constraint for Integrated and Classic mode. So replace the above routes with these routes, routes.MapRoute( "DefaultClassic", // Route name "{controller}.aspx/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional }, // Parameter defaults new { mode = new ClassicModeConstraint() }// Constraints ); routes.MapRoute( "DefaultIntegrated", // Route name "{controller}/{action}/{id}", // URL with parameters new { controller = "Home", action = "Index", id = UrlParameter.Optional }, // Parameter defaults new { mode = new IntegratedModeConstraint() }// Constraints ); The first route which is for Classic mode adds a ClassicModeConstraint and second route which is for Integrated mode adds a IntegratedModeConstraint. Next you need to add the implementation of these constraint classes. public class ClassicModeConstraint : IRouteConstraint { public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return !HttpRuntime.UsingIntegratedPipeline; } } public class IntegratedModeConstraint : IRouteConstraint { public bool Match(HttpContextBase httpContext, Route route, string parameterName, RouteValueDictionary values, RouteDirection routeDirection) { return HttpRuntime.UsingIntegratedPipeline; } } HttpRuntime.UsingIntegratedPipeline returns true if the application is running on Integrated mode; otherwise, it returns false. So routes for Integrated mode only matched when the application is running on Integrated mode and routes for Classic mode only matched when the application is not running on Integrated mode. Summary: During developing applications, sometimes developers are not sure that whether this application will be host on IIS 6 or IIS 7 (or IIS 7.5) Integrated mode or Classic mode. So it's a good idea to create separate routes for both Classic and Integrated mode so that your application will use extension less URLs where possible and use URLs with an extension where it is not possible to use extension less URLs. In this article I showed you how to create separate routes for IIS Integrated and Classic mode. Hope you will enjoy this article too. SyntaxHighlighter.all()

Read the article

SQL SERVER – Guest Post – Glenn Berry – Wait Type – Day 26 of 28

- by pinaldave

Glenn Berry works as a Database Architect at NewsGator Technologies in Denver, CO. He is a SQL Server MVP, and has a whole collection of Microsoft certifications, including MCITP, MCDBA, MCSE, MCSD, MCAD, and MCTS. He is also an Adjunct Faculty member at University College – University of Denver, where he has been teaching since 2000. He is one wonderful blogger and often blogs at here. I am big fan of the Dynamic Management Views (DMV) scripts of Glenn. His script are extremely popular and the reality is that he has inspired me to start this series with his famous DMV which I have mentioned in very first wait stats blog post (I had forgot to request his permission to re-use the script but when asked later on his whole hearty approved it). Here is is his excellent blog post on this subject of wait stats: Analyzing cumulative wait stats in SQL Server 2005 and above has become a popular and effective technique for diagnosing performance issues and further focusing your troubleshooting and diagnostic efforts. Rather than just guessing about what resource(s) that SQL Server is waiting on, you can actually find out by running a relatively simple DMV query. Once you know what resources that SQL Server is spending the most time waiting on, you can run more specific queries that focus on that resource to get a better idea what is causing the problem. I do want to throw out a few caveats about using wait stats as a diagnostic tool. First, they are most useful when your SQL Server instance is experiencing performance problems. If your instance is running well, with no indication of any resource pressure from other sources, then you should not worry that much about what the top wait types are. SQL Server will always be waiting on some resource, but many wait types are quite benign, and can be safely ignored. In spite of this, I quite often see experienced DBAs obsessing over the top wait type, even when their SQL Server instance is running extremely well. Second, I often see DBAs jump to the wrong conclusion based on seeing a particular well-known wait type. A good example is CXPACKET waits. People typically jump to the conclusion that high CXPACKET waits means that they should immediately change their instance-level MADOP setting to 1. This is not always the best solution. You need to consider your workload type, and look carefully for any important “missing” indexes that might be causing the query optimizer to use a parallel plan to compensate for the missing index. In this case, correcting the index problem is usually a better solution than changing MAXDOP, since you are curing the disease rather than just treating the symptom. Finally, you should get in the habit of clearing out your cumulative wait stats with the DBCC SQLPERF(‘sys.dm_os_wait_stats’, CLEAR); command. This is especially important if you have made an configuration or index changes, or if your workload has changed recently. Otherwise, your cumulative wait stats will be polluted with the old stats from weeks or months ago (since the last time SQL Server was started or the stats were cleared). If you make a change to your SQL Server instance, or add an index, you should clear out your wait stats, and then wait a while to see what your new top wait stats are. At any rate, enjoy Pinal Dave’s series on Wait Stats. This blog post has been written by Glenn Berry (Twitter | Blog) Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

Read the article

Web.config WordPress rewrite rules next to Magento

- by Flo

I've installed Magento on IIS in folder: E:\mydomain\wwwroot (I already have it all running correctly). I have no deeper folder magento, I placed all files directly in the wwwroot folder, so: wwwroot\app wwwroot\downloader wwwroot\errors wwwroot\includes etc... UPDATE: since I'm on IIS my .htaccess is ignored completely and my web.config rules are used instead. Here's my web.config in folder e:\mydomain\wwwroot: <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <rewrite> <rules> <rule name="Magento SEO: remove index.php from URL"> <match url="^(?!index.php)([^?#]*)(\\?([^#]*))?(#(.*))?" /> <conditions> <add input="{URL}" pattern="^/(media|skin|js)/" ignoreCase="false" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsFile" ignoreCase="false" negate="true" /> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" ignoreCase="false" negate="true" /> </conditions> <action type="Rewrite" url="index.php/{R:0}" /> </rule> </rules> </rewrite> </system.webServer> </configuration> Next, I wanted to install WordPress. I unzipped all files in folder e:\mydomain\wwwroot\wordpress Browsed to www.mydomain.com/wordpress/wp-admin/install.php, where I configured everything for my database. Everything was installed correctly. I then navigate to http://www.mydomain.com/wordpress/wp-login.php where I type my credentials. I seem to be logged in and am redirected to http://www.mydomain.com/wordpress/wp-admin/ But there I receive an empty page. I enabled detailed error message in IIS following this article: http://www.iis.net/learn/troubleshoot/diagnosing-http-errors/how-to-use-http-detailed-errors-in-iis I also checkec with Fiddler and see that I receive a 500 error: GET /wordpress/wp-admin/ HTTP/1.1 Host: www.mydomain.com Connection: keep-alive Cache-Control: max-age=0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,/;q=0.8 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.76 Safari/537.36 Referer: http://www.mydomain.com/wordpress/wp-login.php Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8,nl;q=0.6 Cookie: wordpress_fabec4083cf12d8de89c98e8aef4b7e3=floran%7C1381236774%7C2d8edb4fc6618f290fadb49b035cad31; wordpress_test_cookie=WP+Cookie+check; wordpress_logged_in_fabec4083cf12d8de89c98e8aef4b7e3=floran%7C1381236774%7Cbf822163926b8b8df16d0f1fefb6e02e HTTP/1.1 500 Internal Server Error Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: PHP/5.4.14 X-Powered-By: ASP.NET Date: Sun, 06 Oct 2013 12:56:03 GMT Content-Length: 0 My WordPress web.config in folder e:\mydomain\wwwroot\wordpress contains: <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <rewrite> <rules> <rule name="wordpress" patternSyntax="Wildcard"> <match url="*"/> <conditions> <add input="{REQUEST_FILENAME}" matchType="IsFile" negate="true"/> <add input="{REQUEST_FILENAME}" matchType="IsDirectory" negate="true"/> </conditions> <action type="Rewrite" url="index.php"/> </rule></rules> </rewrite> </system.webServer> </configuration> I also want my WordPress articles to be available on www.mydomain.com/blog instead of www.mydomain.com/wordpress Ofcourse my admin links for Magento and Wordpress should also work. How can I configure my web.config files to achieve the above?

Read the article

Login failed for user 'sa' because the account is currently locked out. The system administrator can

- by cabhilash

Login failed for user 'sa' because the account is currently locked out. The system administrator can unlock it. (Microsoft SQL Server, Error: 18486) SQL server has local password policies. If policy is enabled which locks down the account after X number of failed attempts then the account is automatically locked down.This error with 'sa' account is very common. sa is default administartor login available with SQL server. So there are chances that an ousider has tried to bruteforce your system. (This can cause even if a legitimate tries to access the account with wrong password.Sometimes a user would have changed the password without informing others. So the other users would try to lo) You can unlock the account with the following options (use another admin account or connect via windows authentication) Alter account & unlock ALTER LOGIN sa WITH PASSWORD='password' UNLOCK Use another account Almost everyone is aware of the sa account. This can be the potential security risk. Even if you provide strong password hackers can lock the account by providing the wrong password. ( You can provide extra security by installing firewall or changing the default port but these measures are not always practical). As a best practice you can disable the sa account and use another account with same privileges.ALTER LOGIN sa DISABLE You can edit the lock-ot options using gpedit.msc( in command prompt type gpedit.msc and press enter). Navigate to Account Lokout policy as shown in the figure The Following options are available Account lockout threshold This security setting determines the number of failed logon attempts that causes a user account to be locked out. A locked-out account cannot be used until it is reset by an administrator or until the lockout duration for the account has expired. You can set a value between 0 and 999 failed logon attempts. If you set the value to 0, the account will never be locked out. Failed password attempts against workstations or member servers that have been locked using either CTRL+ALT+DELETE or password-protected screen savers count as failed logon attempts. Account lockout duration This security setting determines the number of minutes a locked-out account remains locked out before automatically becoming unlocked. The available range is from 0 minutes through 99,999 minutes. If you set the account lockout duration to 0, the account will be locked out until an administrator explicitly unlocks it. If an account lockout threshold is defined, the account lockout duration must be greater than or equal to the reset time. Default: None, because this policy setting only has meaning when an Account lockout threshold is specified. Reset account lockout counter after This security setting determines the number of minutes that must elapse after a failed logon attempt before the failed logon attempt counter is reset to 0 bad logon attempts. The available range is 1 minute to 99,999 minutes. If an account lockout threshold is defined, this reset time must be less than or equal to the Account lockout duration. Default: None, because this policy setting only has meaning when an Account lockout threshold is specified.When creating SQL user you can set CHECK_POLICY=on which will enforce the windows password policy on the account. The following policies will be applied Define the Enforce password history policy setting so that several previous passwords are remembered. With this policy setting, users cannot use the same password when their password expires. Define the Maximum password age policy setting so that passwords expire as often as necessary for your environment, typically, every 30 to 90 days. With this policy setting, if an attacker cracks a password, the attacker only has access to the network until the password expires. Define the Minimum password age policy setting so that passwords cannot be changed until they are more than a certain number of days old. This policy setting works in combination with the Enforce password historypolicy setting. If a minimum password age is defined, users cannot repeatedly change their passwords to get around the Enforce password history policy setting and then use their original password. Users must wait the specified number of days to change their passwords. Define a Minimum password length policy setting so that passwords must consist of at least a specified number of characters. Long passwords--seven or more characters--are usually stronger than short ones. With this policy setting, users cannot use blank passwords, and they have to create passwords that are a certain number of characters long. Enable the Password must meet complexity requirements policy setting. This policy setting checks all new passwords to ensure that they meet basic strong password requirements. Password must meet the following complexity requirement, when they are changed or created: Not contain the user's entire Account Name or entire Full Name. The Account Name and Full Name are parsed for delimiters: commas, periods, dashes or hyphens, underscores, spaces, pound signs, and tabs. If any of these delimiters are found, the Account Name or Full Name are split and all sections are verified not to be included in the password. There is no check for any character or any three characters in succession. Contain characters from three of the following five categories: English uppercase characters (A through Z) English lowercase characters (a through z) Base 10 digits (0 through 9) Non-alphabetic characters (for example, !, $, #, %) A catch-all category of any Unicode character that does not fall under the previous four categories. This fifth category can be regionally specific.

Read the article

SQL SERVER – ASYNC_IO_COMPLETION – Wait Type – Day 11 of 28

- by pinaldave

For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at another IO-related wait type. From Book On-Line: Occurs when a task is waiting for I/Os to finish. ASYNC_IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. If by any means your application that’s connected to SQL Server is processing the data very slowly, this type of wait can occur. Several long-running database operations like BACKUP, CREATE DATABASE, ALTER DATABASE or other operations can also create this wait type. Reducing ASYNC_IO_COMPLETION wait: When it is an issue related to IO, one should check for the following things associated to IO subsystem: Look at the programming and see if there is any application code which processes the data slowly (like inefficient loop, etc.). Note that it should be re-written to avoid this wait type. Proper placing of the files is very important. We should check the file system for proper placement of the files – LDF and MDF on separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk), etc. Check the File Statistics and see if there is a higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly and so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on the development setup (test environment). As soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very likely to happen that there are no proper indexes on the system and yet there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the following two articles I wrote that talk about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

Read the article

Filtering data in LINQ with the help of where clause

- by vik20000in

LINQ has bought with itself a super power of querying Objects, Database, XML, SharePoint and nearly any other data structure. The power of LINQ lies in the fact that it is managed code that lets you write SQL type code to fetch data. Whenever working with data we always need a way to filter out the data based on different condition. In this post we will look at some of the different ways in which we can filter data in LINQ with the help of where clause. Simple Filter for an array. Let’s say we have an array of number and we want to filter out data based on some condition. Below is an example int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; var lowNums = from num in numbers where num < 5 select num; Filter based on one of the property in the class. With the help of LINQ we can also filer out data from a list based on value of some property. var soldOutProducts = from prod in products where prod.UnitsInStock == 0 select prod; Filter based on Multiple of the property in the class. var expensiveInStockProducts = from prod in products where prod.UnitsInStock > 0 && prod.UnitPrice > 3.00M select prod; Filter based on the index of the Item in the list.In the below example we can see that we are able to filter data based on the index of the item in the list. string[] digits = { "zero", "one", "two", "three", "four", "five", "six"}; var shortDigits = digits.Where((digit, index) => digit.Length < index); There are many other way in which we can filter out data in LINQ. In the above post I have tried and shown few ways using the LINQ. Vikram

Read the article

SQL SERVER – IO_COMPLETION – Wait Type – Day 10 of 28

- by pinaldave

For any good system three things are vital: CPU, Memory and IO (disk). Among these three, IO is the most crucial factor of SQL Server. Looking at real-world cases, I do not see IT people upgrading CPU and Memory frequently. However, the disk is often upgraded for either improving the space, speed or throughput. Today we will look at an IO-related wait types. From Book On-Line: Occurs while waiting for I/O operations to complete. This wait type generally represents non-data page I/Os. Data page I/O completion waits appear as PAGEIOLATCH_* waits. IO_COMPLETION Explanation: Any tasks are waiting for I/O to finish. This is a good indication that IO needs to be looked over here. Reducing IO_COMPLETION wait: When it is an issue concerning the IO, one should look at the following things related to IO subsystem: Proper placing of the files is very important. We should check the file system for proper placement of files – LDF and MDF on a separate drive, TempDB on another separate drive, hot spot tables on separate filegroup (and on separate disk),etc. Check the File Statistics and see if there is higher IO Read and IO Write Stall SQL SERVER – Get File Statistics Using fn_virtualfilestats. Check event log and error log for any errors or warnings related to IO. If you are using SAN (Storage Area Network), check the throughput of the SAN system as well as the configuration of the HBA Queue Depth. In one of my recent projects, the SAN was performing really badly so the SAN administrator did not accept it. After some investigations, he agreed to change the HBA Queue Depth on development (test environment) set up and as soon as we changed the HBA Queue Depth to quite a higher value, there was a sudden big improvement in the performance. It is very possible that there are no proper indexes in the system and there are lots of table scans and heap scans. Creating proper index can reduce the IO bandwidth considerably. If SQL Server can use appropriate cover index instead of clustered index, it can effectively reduce lots of CPU, Memory and IO (considering cover index has lesser columns than cluster table and all other; it depends upon the situation). You can refer to the two articles that I wrote; they are about how to optimize indexes: Create Missing Indexes Drop Unused Indexes Checking Memory Related Perfmon Counters SQLServer: Memory Manager\Memory Grants Pending (Consistent higher value than 0-2) SQLServer: Memory Manager\Memory Grants Outstanding (Consistent higher value, Benchmark) SQLServer: Buffer Manager\Buffer Hit Cache Ratio (Higher is better, greater than 90% for usually smooth running system) SQLServer: Buffer Manager\Page Life Expectancy (Consistent lower value than 300 seconds) Memory: Available Mbytes (Information only) Memory: Page Faults/sec (Benchmark only) Memory: Pages/sec (Benchmark only) Checking Disk Related Perfmon Counters Average Disk sec/Read (Consistent higher value than 4-8 millisecond is not good) Average Disk sec/Write (Consistent higher value than 4-8 millisecond is not good) Average Disk Read/Write Queue Length (Consistent higher value than benchmark is not good) Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussions of Wait Stats in this blog are generic and vary from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Types, SQL White Papers, T SQL, Technology

Read the article

C++ problem with assimp 3D model loader

- by Brendan Webster

In my game I have model loading functions for Assimp model loading library. I can load the model and render it, but the model displays incorrectly. The models load in as if they were using a seperate projection matrix. I have looked over my code over and over again, but I probably keep on missing the obvious reason why this is happening. Here is an image of my game: It's simply a 6 sided cube, but it's off big time! Here are my code snippets for rendering the cube to the screen: void C_MediaLoader::display(void) { float tmp; glTranslatef(0,0,0); // rotate it around the y axis glRotatef(angle,0.f,0.f,1.f); glColor4f(1,1,1,1); // scale the whole asset to fit into our view frustum tmp = scene_max.x-scene_min.x; tmp = aisgl_max(scene_max.y - scene_min.y,tmp); tmp = aisgl_max(scene_max.z - scene_min.z,tmp); tmp = (1.f / tmp); glScalef(tmp/5, tmp/5, tmp/5); // center the model //glTranslatef( -scene_center.x, -scene_center.y, -scene_center.z ); // if the display list has not been made yet, create a new one and // fill it with scene contents if(scene_list == 0) { scene_list = glGenLists(1); glNewList(scene_list, GL_COMPILE); // now begin at the root node of the imported data and traverse // the scenegraph by multiplying subsequent local transforms // together on GL's matrix stack. recursive_render(scene, scene->mRootNode); glEndList(); } glCallList(scene_list); } void C_MediaLoader::recursive_render (const struct aiScene *sc, const struct aiNode* nd) { unsigned int i; unsigned int n = 0, t; struct aiMatrix4x4 m = nd->mTransformation; // update transform aiTransposeMatrix4(&m); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++) { int index = face->mIndices[i]; if(mesh->mColors[0] != NULL) glColor4fv((GLfloat*)&mesh->mColors[0][index]); if(mesh->mNormals != NULL) glNormal3fv(&mesh->mNormals[index].x); glVertex3fv(&mesh->mVertices[index].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n]); } glPopMatrix(); } Sorry there is so much code to look through, but I really cannot find the problem, and I would love to have help.

Read the article

Sprite animation in openGL - Some frames are being skipped

- by Sid

Earlier, I was facing problems on implementing sprite animation in openGL ES. Now its being sorted up. But the problem that i am facing now is that some of my frames are being skipped when a bullet(a circle) strikes on it. What I need : A sprite animation should stop at the last frame without skipping any frame. What I did : Collision Detection function and working properly. PS : Everything is working fine but i want to implement the animation in OPENGL ONLY. Canvas won't work in my case. ------------------------ EDIT----------------------- My sprite sheet. Consider the animation from Left to right and then from top to bottom Here is an image for a better understanding. My spritesheet ... class FragileSquare{ FloatBuffer fVertexBuffer, mTextureBuffer; ByteBuffer mColorBuff; ByteBuffer mIndexBuff; int[] textures = new int[1]; public boolean beingHitFromBall = false; int numberSprites = 20; int columnInt = 4; //number of columns as int float columnFloat = 4.0f; //number of columns as float float rowFloat = 5.0f; int oldIdx; public FragileSquare() { // TODO Auto-generated constructor stub float vertices [] = {-1.0f,1.0f, //byte index 0 1.0f, 1.0f, //byte index 1 //byte index 2 -1.0f, -1.0f, 1.0f,-1.0f}; //byte index 3 float textureCoord[] = { 0.0f,0.0f, 0.25f,0.0f, 0.0f,0.20f, 0.25f,0.20f }; byte indices[] = {0, 1, 2, 1, 2, 3 }; ByteBuffer byteBuffer = ByteBuffer.allocateDirect(4*2 * 4); // 4 vertices, 2 co-ordinates(x,y) 4 for converting in float byteBuffer.order(ByteOrder.nativeOrder()); fVertexBuffer = byteBuffer.asFloatBuffer(); fVertexBuffer.put(vertices); fVertexBuffer.position(0); ByteBuffer byteBuffer2 = ByteBuffer.allocateDirect(textureCoord.length * 4); byteBuffer2.order(ByteOrder.nativeOrder()); mTextureBuffer = byteBuffer2.asFloatBuffer(); mTextureBuffer.put(textureCoord); mTextureBuffer.position(0); } public void draw(GL10 gl){ gl.glFrontFace(GL11.GL_CW); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glVertexPointer(1,GL10.GL_FLOAT, 0, fVertexBuffer); gl.glEnable(GL10.GL_TEXTURE_2D); if(MyRender.flag2==1){ /** Collision has taken place*/ int idx = oldIdx==(numberSprites-1) ? (numberSprites-1) : (int)((System.currentTimeMillis()%(200*numberSprites))/200); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glTranslatef((idx%columnInt)/columnFloat, (idx/columnInt)/rowFloat, 0); gl.glMatrixMode(GL10.GL_MODELVIEW); oldIdx = idx; } gl.glEnable(GL10.GL_BLEND); gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]); //4 gl.glTexCoordPointer(2, GL10.GL_FLOAT,0, mTextureBuffer); //5 gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, 4); //7 gl.glFrontFace(GL11.GL_CCW); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY); gl.glMatrixMode(GL10.GL_TEXTURE); gl.glLoadIdentity(); gl.glMatrixMode(GL10.GL_MODELVIEW); } public void loadFragileTexture(GL10 gl, Context context, int resource) { Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), resource); gl.glGenTextures(1, textures, 0); gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_REPEAT); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_REPEAT); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); bitmap.recycle(); }

Read the article

MVC Portable Areas – Static Files as Embedded Resources

- by Steve Michelotti

This is the third post in a series related to build and deployment considerations as I’ve been exploring MVC Portable Areas: #1 – Using Web Application Project to build portable areas #2 – Conventions for deploying portable area static files #3 – Portable area static files as embedded resources In the last post, I walked through a convention for managing static files. In this post I’ll discuss another approach to manage static files (e.g., images, css, js, etc.). With this approach, you *also* compile the static files as embedded resources into the assembly similar to the *.aspx pages. Once again, you can set this to happen automatically by simply modifying your *.csproj file to include the desired extensions so you don’t have to remember every time you add a file: 1: <Target Name="BeforeBuild"> 2: <ItemGroup> 3: <EmbeddedResource Include="**\*.aspx;**\*.ascx;**\*.gif;**\*.css;**\*.js" /> 4: </ItemGroup> 5: </Target> We now need a reliable way to serve up these static files that are embedded in the assembly. There are a couple of ways to do this but one way is to simply create a Resource controller whose job is dedicated to doing this. 1: public class ResourceController : Controller 2: { 3: public ActionResult Index(string resourceName) 4: { 5: var contentType = GetContentType(resourceName); 6: var resourceStream = Assembly.GetExecutingAssembly().GetManifestResourceStream(resourceName); 7: 8: return this.File(resourceStream, contentType); 9: return View(); 10: } 11: 12: private static string GetContentType(string resourceName) 13: { 14: var extention = resourceName.Substring(resourceName.LastIndexOf('.')).ToLower(); 15: switch (extention) 16: { 17: case ".gif": 18: return "image/gif"; 19: case ".js": 20: return "text/javascript"; 21: case ".css": 22: return "text/css"; 23: default: 24: return "text/html"; 25: } 26: } 27: } In order to use this controller, we need to make sure we’ve registered the route in our portable area registration (shown in lines 5-6): 1: public class WidgetAreaRegistration : PortableAreaRegistration 2: { 3: public override void RegisterArea(System.Web.Mvc.AreaRegistrationContext context, IApplicationBus bus) 4: { 5: context.MapRoute("ResourceRoute", "widget1/resource/{resourceName}", 6: new { controller = "Resource", action = "Index" }); 7: 8: context.MapRoute("Widget1", "widget1/{controller}/{action}", new 9: { 10: controller = "Home", 11: action = "Index" 12: }); 13: 14: RegisterTheViewsInTheEmbeddedViewEngine(GetType()); 15: } 16: 17: public override string AreaName 18: { 19: get { return "Widget1"; } 20: } 21: } In my previous post, we relied on a custom Url helper method to find the actual physical path to the static file like this: 1: <img src="<%: Url.AreaContent("/images/arrow.gif") %>" /> Hello World! However, since we are now embedding the files inside the assembly, we no longer have to worry about the physical path. We can change this line of code to this: 1: <img src="<%: Url.Resource("Widget1.images.arrow.gif") %>" /> Hello World! Note that I had to fully quality the resource name (with namespace and physical location) since that is how .NET assemblies store embedded resources. I also created my own Url helper method called Resource which looks like this: 1: public static string Resource(this UrlHelper urlHelper, string resourceName) 2: { 3: var areaName = (string)urlHelper.RequestContext.RouteData.DataTokens["area"]; 4: return urlHelper.Action("Index", "Resource", new { resourceName = resourceName, area = areaName }); 5: } This method gives us the convenience of not having to know how to construct the URL – but just allowing us to refer to the resource name. The resulting html for the image tag is: 1: <img src="/widget1/resource/Widget1.images.arrow.gif" /> so we can always request any image from the browser directly. This is almost analogous to the WebResource.axd file but for MVC. What is interesting though is that we can encapsulate each one of these so that each area can have it’s own set of resources and they are easily distinguished because the area name is the first segment of the route. This makes me wonder if something like this ResourceController should be baked into portable areas itself. I’m definitely interested in anyone has any opinions on it or have taken alternative approaches.

Read the article

Problem with Assimp 3D model loader

- by Brendan Webster

In my game I have model loading functions for Assimp model loading library. I can load the model and render it, but the model displays incorrectly. The models load in as if they were using a seperate projection matrix. I have looked over my code over and over again, but I probably keep on missing the obvious reason why this is happening. Here is an image of my game: It's simply a 6 sided cube, but it's off big time! Here are my code snippets for rendering the cube to the screen: void C_MediaLoader::display(void) { float tmp; glTranslatef(0,0,0); // rotate it around the y axis glRotatef(angle,0.f,0.f,1.f); glColor4f(1,1,1,1); // scale the whole asset to fit into our view frustum tmp = scene_max.x-scene_min.x; tmp = aisgl_max(scene_max.y - scene_min.y,tmp); tmp = aisgl_max(scene_max.z - scene_min.z,tmp); tmp = (1.f / tmp); glScalef(tmp/5, tmp/5, tmp/5); // center the model //glTranslatef( -scene_center.x, -scene_center.y, -scene_center.z ); // if the display list has not been made yet, create a new one and // fill it with scene contents if(scene_list == 0) { scene_list = glGenLists(1); glNewList(scene_list, GL_COMPILE); // now begin at the root node of the imported data and traverse // the scenegraph by multiplying subsequent local transforms // together on GL's matrix stack. recursive_render(scene, scene->mRootNode); glEndList(); } glCallList(scene_list); } void C_MediaLoader::recursive_render (const struct aiScene *sc, const struct aiNode* nd) { unsigned int i; unsigned int n = 0, t; struct aiMatrix4x4 m = nd->mTransformation; // update transform aiTransposeMatrix4(&m); glPushMatrix(); glMultMatrixf((float*)&m); // draw all meshes assigned to this node for (; n < nd->mNumMeshes; ++n) { const struct aiMesh* mesh = scene->mMeshes[nd->mMeshes[n]]; apply_material(sc->mMaterials[mesh->mMaterialIndex]); if(mesh->mNormals == NULL) { glDisable(GL_LIGHTING); } else { glEnable(GL_LIGHTING); } for (t = 0; t < mesh->mNumFaces; ++t) { const struct aiFace* face = &mesh->mFaces[t]; GLenum face_mode; switch(face->mNumIndices) { case 1: face_mode = GL_POINTS; break; case 2: face_mode = GL_LINES; break; case 3: face_mode = GL_TRIANGLES; break; default: face_mode = GL_POLYGON; break; } glBegin(face_mode); for(i = 0; i < face->mNumIndices; i++) { int index = face->mIndices[i]; if(mesh->mColors[0] != NULL) glColor4fv((GLfloat*)&mesh->mColors[0][index]); if(mesh->mNormals != NULL) glNormal3fv(&mesh->mNormals[index].x); glVertex3fv(&mesh->mVertices[index].x); } glEnd(); } } // draw all children for (n = 0; n < nd->mNumChildren; ++n) { recursive_render(sc, nd->mChildren[n]); } glPopMatrix(); } Sorry there is so much code to look through, but I really cannot find the problem, and I would love to have help.

Read the article

Database Owner Conundrum

- by Johnm

Have you ever restored a database from a production environment on Server A into a development environment on Server B and had some items, such as Service Broker, mysteriously cease functioning? You might want to consider reviewing the database owner property of the database. The Scenario Recently, I was developing some messaging functionality that utilized the Service Broker feature of SQL Server in a development environment. Within the instance of the development environment resided two databases: One was a restored version of a production database that we will call "RestoreDB". The second database was a brand new database that has yet to exist in the production environment that we will call "DevDB". The goal is to setup a communication path between RestoreDB and DevDB that will later be implemented into the production database. After implementing all of the Service Broker objects that are required to communicate within a database as well as between two databases on the same instance I found myself a bit confounded. My testing was showing that the communication was successful when it was occurring internally within DevDB; but the communication between RestoreDB and DevDB did not appear to be working. Profiler to the rescue After carefully reviewing my code for any misspellings, missing commas or any other minor items that might be a syntactical cause of failure, I decided to launch Profiler to aid in the troubleshooting. After simulating the cross database messaging, I noticed the following error appearing in Profiler: An exception occurred while enqueueing a message in the target queue. Error: 33009, State: 2. The database owner SID recorded in the master database differs from the database owner SID recorded in database '[Database Name Here]'. You should correct this situation by resetting the owner of database '[Database Name Here]' using the ALTER AUTHORIZATION statement. Now, this error message is a helpful one. Not only does it identify the issue in plain language, it also provides a potential solution. An execution of the following query that utilizes the catalog view sys.transmission_queue revealed the same error message for each communication attempt: SELECT * FROM sys.transmission_queue; Seeing the situation as a learning opportunity I dove a bit deeper. Reviewing the database properties The owner of a specific database can be easily viewed by right-clicking the database in SQL Server Management Studio and selecting the "properties" option. The owner is listed on the "General" page of the properties screen. In my scenario, the database in the production server was created by Frank the DBA; therefore his server login appeared as the owner: "ServerName\Frank". While this is interesting information, it certainly doesn't tell me much in regard to the SID (security identifier) and its existence, or lack thereof, in the master database as the error suggested. I pulled together the following query to gather more interesting information: SELECT a.name , a.owner_sid , b.sid , b.name , b.type_desc FROM master.sys.databases a LEFT OUTER JOIN master.sys.server_principals b ON a.owner_sid = b.sid WHERE a.name not in ('master','tempdb','model','msdb'); This query also helped identify how many other user databases in the instance were experiencing the same issue. In this scenario, I saw that there were no matching SIDs in server_principals to the owner SID for my database. What login should be used as the database owner instead of Frank's? The system stored procedure sp_helplogins will provide a list of the valid logins that can be used. Here is an example of its use, revealing all available logins: EXEC sp_helplogins; Fixing a hole The error message stated that the recommended solution was to execute the ALTER AUTHORIZATION statement. The full statement for this scenario would appear as follows: ALTER AUTHORIZATION ON DATABASE:: [Database Name Here] TO [Login Name]; Another option is to execute the following statement using the sp_changedbowner system stored procedure; but please keep in mind that this stored procedure has been deprecated and will likely disappear in future versions of SQL Server: EXEC dbo.sp_changedbowner @loginname = [Login Name]; .And They Lived Happily Ever After Upon changing the database owner to an existing login and simulating the inner and cross database messaging the errors have ceased. More importantly, all messages sent through this feature now successfully complete their journey. I have added the ownership change to my restoration script for the development environment.

Read the article

How the number of indexes built on a table can impact performances?

- by Davide Mauri

We all know that putting too many indexes (I’m talking of non-clustered index only, of course) on table may produce performance problems due to the overhead that each index bring to all insert/update/delete operations on that table. But how much? I mean, we all agree – I think – that, generally speaking, having many indexes on a table is “bad”. But how bad it can be? How much the performance will degrade? And on a concurrent system how much this situation can also hurts SELECT performances? If SQL Server take more time to update a row on a table due to the amount of indexes it also has to update, this also means that locks will be held for more time, slowing down the perceived performance of all queries involved. I was quite curious to measure this, also because when teaching it’s by far more impressive and effective to show to attended a chart with the measured impact, so that they can really “feel” what it means! To do the tests, I’ve create a script that creates a table (that has a clustered index on the primary key which is an identity column) , loads 1000 rows into the table (inserting 1000 row using only one insert, instead of issuing 1000 insert of one row, in order to minimize the overhead needed to handle the transaction, that would have otherwise ), and measures the time taken to do it. The process is then repeated 16 times, each time adding a new index on the table, using columns from table in a round-robin fashion. Test are done against different row sizes, so that it’s possible to check if performance changes depending on row size. The result are interesting, although expected. This is the chart showing how much time it takes to insert 1000 on a table that has from 0 to 16 non-clustered indexes. Each test has been run 20 times in order to have an average value. The value has been cleaned from outliers value due to unpredictable performance fluctuations due to machine activity. The test shows that in a table with a row size of 80 bytes, 1000 rows can be inserted in 9,05 msec if no indexes are present on the table, and the value grows up to 88 (!!!) msec when you have 16 indexes on it This means a impact on performance of 975%. That’s *huge*! Now, what happens if we have a bigger row size? Say that we have a table with a row size of 1520 byte. Here’s the data, from 0 to 16 indexes on that table: In this case we need near 22 msec to insert 1000 in a table with no indexes, but we need more that 500msec if the table has 16 active indexes! Now we’re talking of a 2410% impact on performance! Now we can have a tangible idea of what’s the impact of having (too?) many indexes on a table and also how the size of a row also impact performances. That’s why the golden rule of OLTP databases “few indexes, but good” is so true! (And in fact last week I saw a database with tables with 1700bytes row size and 23 (!!!) indexes on them!) This also means that a too heavy denormalization is really not a good idea (we’re always talking about OLTP systems, keep it in mind), since the performance get worse with the increase of the row size. So, be careful out there, and keep in mind the “equilibrium” is the key world of a database professional: equilibrium between read and write performance, between normalization and denormalization, between to few and too may indexes. PS Tests are done on a VMWare Workstation 7 VM with 2 CPU and 4 GB of Memory. Host machine is a Dell Precsioni M6500 with i7 Extreme X920 Quad-Core HT 2.0Ghz and 16Gb of RAM. Database is stored on a SSD Intel X-25E Drive, Simple Recovery Model, running on SQL Server 2008 R2. If you also want to to tests on your own, you can download the test script here: Open TestIndexPerformance.sql

Read the article

RewriteRule not working for certain URLs

- by keiki

There are a few domains pointing towards the same server, and of course I need them all redirect to only one of them. Redirects work, but only for certain URLs. What works: http://www.domain.com, http://domain.com, domain.com/index.html, domain.com/index.php, , domain.com/nonExistentDirectory, and if I click in the menu the following URLs are also redirected correctly: domain.com/foo/bar, domain.com/foo/bar.html or .php or other extension. What doesn't work: domain.com/existentDirectory, domain.com/foo/bar (if I type the URL in the address bar). If anyone will have the time and skill and will to tell me where's the mistake, I'll be deeply grateful. Here's my .htaccess file: AddHandler x-httpd-php .html .htm <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file \.(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> <ifModule mod_expires.c> ExpiresActive On ExpiresDefault "access plus 1 seconds" ExpiresByType text/html "access plus 1 seconds" ExpiresByType image/gif "access plus 2592000 seconds" ExpiresByType image/jpeg "access plus 2592000 seconds" ExpiresByType image/png "access plus 2592000 seconds" ExpiresByType text/css "access plus 2592000 seconds" ExpiresByType text/javascript "access plus 216000 seconds" ExpiresByType application/x-javascript "access plus 216000 seconds" </ifModule> <ifModule mod_headers.c> <filesMatch "\\.(ico|pdf|flv|jpg|jpeg|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(css)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(js)$"> Header set Cache-Control "max-age=216000, private" </filesMatch> <filesMatch "\\.(xml|txt)$"> Header set Cache-Control "max-age=216000, public, must-revalidate" </filesMatch> <filesMatch "\\.(html|htm|php)$"> Header set Cache-Control "max-age=1, private, must-revalidate" </filesMatch> </ifModule> <ifModule mod_headers.c> Header unset ETag </ifModule> FileETag None <ifModule mod_headers.c> Header unset Last-Modified </ifModule> # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress RewriteCond %{HTTP_HOST} ^foo\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo1\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo1\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo2\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo2\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo3\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo3\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo8\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo8\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] Thinking that the above version was overkill, I've also tried to redirect all the requests for domains different than the main on to be redirected to it like this: RewriteCond %{HTTP_HOST} !^domain\.com$ [NC] RewriteRule ^(.*)$ http://domain.com [L,R=301] Is it also wrong? Because it doesn't work either! P.S. @Sodved I've tried that and it doesn't help (I comment here because I can't seem to be able to comment your answer.) Removing the following piece of code didn't solve the issue either, so the problem must be somewhere else: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress New details: using this tool for checking the redirects I got the following results for the URLs that are not redirected: Checked link: http://domain.com/aDirectory/ Type of link: direct link (note the trailing slash above) and: Checked link: http://domain.com/aDirectory Type of redirect: 301 Moved Permanently Redirected to: http://domain.com/aDirectory/ (no trailing slash here) I hope/suspect I'm getting closer to the cause of this behavior.

Read the article

Database Rebuild

- by Robert May

I promised I’d have a simpler mechanism for rebuilding the database. Below is a complete MSBuild targets file for rebuilding the database from scratch. I don’t know if I’ve explained the rational for this. The reason why you’d WANT to do this is so that each developer has a clean version of the database on their local machine. This also includes the continuous integration environment. Basically, you can do whatever you want to the database without fear, and in a minute or two, have a completely rebuilt database structure. DBDeploy (including the KTSC build task for dbdeploy) is used in this script to do change tracking on the database itself. The MSBuild ExtensionPack is used in this target file. You can get an MSBuild DBDeploy task here. There are two database scripts that you’ll see below. First is the task for creating an admin (dbo) user in the system. This script looks like the following: USE [master] GO If not Exists (select Name from sys.sql_logins where name = '$(User)') BEGIN CREATE LOGIN [$(User)] WITH PASSWORD=N'$(Password)', DEFAULT_DATABASE=[$(DatabaseName)], CHECK_EXPIRATION=OFF, CHECK_POLICY=OFF END GO EXEC master..sp_addsrvrolemember @loginame = N'$(User)', @rolename = N'sysadmin' GO USE [$(DatabaseName)] GO CREATE USER [$(User)] FOR LOGIN [$(User)] GO ALTER USER [$(User)] WITH DEFAULT_SCHEMA=[dbo] GO EXEC sp_addrolemember N'db_owner', N'$(User)' GO The second creates the changelog table. This script can also be found in the dbdeploy.net install\scripts directory. CREATE TABLE changelog ( change_number INTEGER NOT NULL, delta_set VARCHAR(10) NOT NULL, start_dt DATETIME NOT NULL, complete_dt DATETIME NULL, applied_by VARCHAR(100) NOT NULL, description VARCHAR(500) NOT NULL ) GO ALTER TABLE changelog ADD CONSTRAINT Pkchangelog PRIMARY KEY (change_number, delta_set) GO Finally, Here’s the targets file. <Projectxmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0" DefaultTargets="Update"> <PropertyGroup> <DatabaseName>TestDatabase</DatabaseName> <Server>localhost</Server> <ScriptDirectory>.\Scripts</ScriptDirectory> <RebuildDirectory>.\Rebuild</RebuildDirectory> <TestDataDirectory>.\TestData</TestDataDirectory> <DbDeploy>.\DBDeploy</DbDeploy> <User>TestUser</User> <Password>TestPassword</Password> <BCP>bcp</BCP> <BCPOptions>-S$(Server) -U$(User) -P$(Password) -N -E -k</BCPOptions> <OutputFileName>dbDeploy-output.sql</OutputFileName> <UndoFileName>dbDeploy-output-undo.sql</UndoFileName> <LastChangeToApply>99999</LastChangeToApply> </PropertyGroup> <ImportProject="$(MSBuildExtensionsPath)\ExtensionPack\4.0\MSBuild.ExtensionPack.tasks"/> <UsingTask TaskName="Ktsc.Build.DBDeploy" AssemblyFile="$(DbDeploy)\Ktsc.Build.dll"/> <ItemGroup> <VariableInclude="DatabaseName"> <Value>$(DatabaseName)</Value> </Variable> <VariableInclude="Server"> <Value>$(Server)</Value> </Variable> <VariableInclude="User"> <Value>$(User)</Value> </Variable> <VariableInclude="Password"> <Value>$(Password)</Value> </Variable> </ItemGroup> <TargetName="Rebuild">  <MSBuild.ExtensionPack.SqlServer.SqlCmd Variables="@(Variable)" Database="$(DatabaseName)" TaskAction="Execute" CommandLineQuery ="ALTER DATABASE $(DatabaseName) SET OFFLINE WITH ROLLBACK IMMEDIATE"/>  <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="SetOnline" DatabaseItem="$(DatabaseName)"/>  <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="Delete" DatabaseItem="$(DatabaseName)"/>  <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="Create" DatabaseItem="$(DatabaseName)" Force="True"/>  <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" InputFiles="$(RebuildDirectory)\0002 Create Admin User.sql" Variables="@(Variable)" />  <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" LogOn="$(User)" Password="$(Password)" InputFiles="$(RebuildDirectory)\0003 Create Changelog.sql" Variables="@(Variable)" /> <CallTarget Targets="Update;ImportData"/> </Target> <TargetName="Update" DependsOnTargets="CreateUpdateScript"> <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" LogOn="$(User)" Password="$(Password)" InputFiles="$(OutputFileName)" Variables="@(Variable)" /> </Target> <TargetName="CreateUpdateScript"> <ktsc.Build.DBDeploy DbType="mssql" DbConnection="User=$(User);Password=$(Password);Data Source=$(Server);Initial Catalog=$(DatabaseName);" Dir="$(ScriptDirectory)" OutputFile="..\$(OutputFileName)" UndoOutputFile="..\$(UndoFileName)" LastChangeToApply="$(LastChangeToApply)"/> </Target> <TargetName="ImportData"> <ItemGroup> <TestData Include="$(TestDataDirectory)\*.dat"/> </ItemGroup> <ExecCommand="$(BCP) $(DatabaseName).dbo.%(TestData.Filename) in"%(TestData.Identity)"$(BCPOptions)"/> </Target> </Project> Technorati Tags: MSBuild

Read the article

Reducing Deadlocks - not a DBA issue ?

- by steveh99999

As a DBA, I'm involved on an almost daily basis troubleshooting 'SQL Server' performance issues. Often, this troubleshooting soon veers away from a 'its a SQL Server issue' to instead become a wider application/database design/coding issue.One common perception with SQL Server is that deadlocking is an application design issue - and is fixed by recoding... I see this reinforced by MCP-type questions/scenarios where the answer to prevent deadlocking is simply to change the order in code in which tables are accessed....Whilst this is correct, I do think this has led to a situation where many 'operational' or 'production support' DBAs, when faced with a deadlock, are happy to throw the issue over to developers without analysing the issue further....A couple of 'war stories' on deadlocks which I think are interesting :- Case One , I had an issue recently on a third-party application that I support on SQL 2008. This particular third-party application has an unusual support agreement where the customer is allowed to change the index design on the third-party provided database. However, we are not allowed to alter application code or modify table structure..This third-party application is also known to encounter occasional deadlocks – indeed, I have documentation from the vendor that up to 50 deadlocks per day is not unusual !So, as a DBA I have to support an application which in my opinion has too many deadlocks - but, I cannot influence the design of the tables or stored procedures for the application. This should be the classic - blame the third-party developers scenario, and hope this issue gets addressed in a future application release - ie we could wait years for this to be resolved and implemented in our production environment...But, as DBAs can change the index layout, is there anything I could do still to reduce the deadlocks in the application ?I initially used SQL traceflag 1222 to write deadlock detection output to the SQL Errorlog – using this I was able to identify one table heavily involved in the deadlocks.When I examined the table definition, I was surprised to see it was a heap – ie no clustered index existed on the table.Using SQL profiler to see locking behaviour and plan for the query involved in the deadlock, I was able to confirm a table scan was being performed.By creating an appropriate clustered index - it was possible to produce a more efficient plan and locking behaviour.So, less locks, held for less time = less possibility of deadlocks. I'm still unhappy about the overall number of deadlocks on this system - but that's something to be discussed further with the vendor.Case Two, a system which hadn't changed for months suddenly started seeing deadlocks on a regular basis. I love the 'nothing's changed' scenario, as it gives me the opportunity to appear wise and say 'nothings changed on this system, except the data'.. This particular deadlock occurred on a table which had been growing rapidly. By using DBCC SHOW_STATISTICS - the DBA team were able to see that the deadlocks seemed to be occurring shortly after auto-update stats had regenerated the table statistics using it's default sampling behaviour.As a quick fix, we were able to schedule a nightly UPDATE STATISTICS WITH FULLSCAN on the table involved in the deadlock - thus, greatly reducing the potential for stats to be updated via auto_update_stats, consequently reducing the potential for a bad plan to be generated based on an unrepresentative sample of the data. This reduced the possibility of a deadlock occurring. Not a perfect solution by any means, but quick, easy to implement, and needed no application code changes. This fix gave us some 'breathing space' to properly fix the code during the next scheduled application release. The moral of this post - don't dismiss deadlocks as issues that can only be fixed by developers...

Read the article

Generate texture for a heightmap

- by James

I've recently been trying to blend multiple textures based on the height at different points in a heightmap. However i've been getting poor results. I decided to backtrack and just attempt to recreate one single texture from an SDL_Surface (i'm using SDL) and just send that into opengl. I'll put my code for creating the texture and reading the colour values. It is a 24bit TGA i'm loading, and i've confirmed that the rest of my code works because i was able to send the surfaces pixels directly to my createTextureFromData function and it drew fine. struct RGBColour { RGBColour() : r(0), g(0), b(0) {} RGBColour(unsigned char red, unsigned char green, unsigned char blue) : r(red), g(green), b(blue) {} unsigned char r; unsigned char g; unsigned char b; }; // main loading code SDLSurfaceReader* reader = new SDLSurfaceReader(m_renderer); reader->readSurface("images/grass.tga"); // new texture unsigned char* newTexture = new unsigned char[reader->m_surface->w * reader->m_surface->h * 3 * reader->m_surface->w]; for (int y = 0; y < reader->m_surface->h; y++) { for (int x = 0; x < reader->m_surface->w; x += 3) { int index = (y * reader->m_surface->w) + x; RGBColour colour = reader->getColourAt(x, y); newTexture[index] = colour.r; newTexture[index + 1] = colour.g; newTexture[index + 2] = colour.b; } } unsigned int id = m_renderer->createTextureFromData(newTexture, reader->m_surface->w, reader->m_surface->h, RGB); // functions for reading pixels RGBColour SDLSurfaceReader::getColourAt(int x, int y) { Uint32 pixel; Uint8 red, green, blue; RGBColour rgb; pixel = getPixel(m_surface, x, y); SDL_LockSurface(m_surface); SDL_GetRGB(pixel, m_surface->format, &red, &green, &blue); SDL_UnlockSurface(m_surface); rgb.r = red; rgb.b = blue; rgb.g = green; return rgb; } // this function taken from SDL documentation // http://www.libsdl.org/cgi/docwiki.cgi/Introduction_to_SDL_Video#getpixel Uint32 SDLSurfaceReader::getPixel(SDL_Surface* surface, int x, int y) { int bpp = m_surface->format->BytesPerPixel; Uint8 *p = (Uint8*)m_surface->pixels + y * m_surface->pitch + x * bpp; switch (bpp) { case 1: return *p; case 2: return *(Uint16*)p; case 3: if (SDL_BYTEORDER == SDL_BIG_ENDIAN) return p[0] << 16 | p[1] << 8 | p[2]; else return p[0] | p[1] << 8 | p[2] << 16; case 4: return *(Uint32*)p; default: return 0; } } I've been stumped at this, and I need help badly! Thanks so much for any advice.

Read the article

Stale statistics on a newly created temporary table in a stored procedure can lead to poor performance

- by sqlworkshops

When you create a temporary table you expect a new table with no past history (statistics based on past existence), this is not true if you have less than 6 updates to the temporary table. This might lead to poor performance of queries which are sensitive to the content of temporary tables.I was optimizing SQL Server Performance at one of my customers who provides search functionality on their website. They use stored procedure with temporary table for the search. The performance of the search depended on who searched what in the past, option (recompile) by itself had no effect. Sometimes a simple search led to timeout because of non-optimal plan usage due to this behavior. This is not a plan caching issue rather temporary table statistics caching issue, which was part of the temporary object caching feature that was introduced in SQL Server 2005 and is also present in SQL Server 2008 and SQL Server 2012. In this customer case we implemented a workaround to avoid this issue (see below for example for workarounds).When temporary tables are cached, the statistics are not newly created rather cached from the past and updated based on automatic update statistics threshold. Caching temporary tables/objects is good for performance, but caching stale statistics from the past is not optimal.We can work around this issue by disabling temporary table caching by explicitly executing a DDL statement on the temporary table. One possibility is to execute an alter table statement, but this can lead to duplicate constraint name error on concurrent stored procedure execution. The other way to work around this is to create an index.I think there might be many customers in such a situation without knowing that stale statistics are being cached along with temporary table leading to poor performance.Ideal solution is to have more aggressive statistics update when the temporary table has less number of rows when temporary table caching is used. I will open a connect item to report this issue.Meanwhile you can mitigate the issue by creating an index on the temporary table. You can monitor active temporary tables using Windows Server Performance Monitor counter: SQL Server: General Statistics->Active Temp Tables. The script to understand the issue and the workaround is listed below:set nocount onset statistics time offset statistics io offdrop table tab7gocreate table tab7 (c1 int primary key clustered, c2 int, c3 char(200))gocreate index test on tab7(c2, c1, c3)gobegin trandeclare @i intset @i = 1while @i <= 50000begininsert into tab7 values (@i, 1, ‘a’)set @i = @i + 1endcommit trangoinsert into tab7 values (50001, 1, ‘a’)gocheckpointgodrop proc test_slowgocreate proc test_slow @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_slow 1godbcc dropcleanbuffersgo–high reads that are not expected for parameter ’2'exec test_slow 2godrop proc test_with_recompilegocreate proc test_with_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_with_recompile 1godbcc dropcleanbuffersgo–high reads that are not expected for parameter ’2'–low reads on 3rd execution as expected for parameter ’2'exec test_with_recompile 2godrop proc test_with_alter_table_recompilegocreate proc test_with_alter_table_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)–to avoid caching of temporary tables one can create a constraint–but this might lead to duplicate constraint name error on concurrent usagealter table #temp1 add constraint test123 unique(c1)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgodbcc dropcleanbuffersset statistics time onset statistics io ongo–high reads as expected for parameter ’1'exec test_with_alter_table_recompile 1godbcc dropcleanbuffersgo–low reads as expected for parameter ’2'exec test_with_alter_table_recompile 2godrop proc test_with_index_recompilegocreate proc test_with_index_recompile @i intasbegindeclare @j intcreate table #temp1 (c1 int primary key)–to avoid caching of temporary tables one can create an indexcreate index test on #temp1(c1)insert into #temp1 (c1) select @iselect @j = t7.c1 from tab7 t7 inner join #temp1 t on (t7.c2 = t.c1)option (recompile)endgoset statistics time onset statistics io ondbcc dropcleanbuffersgo–high reads as expected for parameter ’1'exec test_with_index_recompile 1godbcc dropcleanbuffersgo–low reads as expected for parameter ’2'exec test_with_index_recompile 2go

Read the article

FBX Importer - Texture Name

- by CmasterG

I have a problem with the FBX SDK. I read in the data for the vertex position and the uv coordinates. It works fine, but now I want to read for each polygon to which texture it belongs, so that I can have models with multiple textures. Can anyone tell me how I can get the texture name (file name) for my polygon. My code to read in vertex position and uv coordinates is the following: int i, j, lPolygonCount = pMesh->GetPolygonCount(); FbxVector4* lControlPoints = pMesh->GetControlPoints(); int vertexId = 0; for (i = 0; i < lPolygonCount; i++) { int lPolygonSize = pMesh->GetPolygonSize(i); for (j = 0; j < lPolygonSize; j++) { int lControlPointIndex = pMesh->GetPolygonVertex(i, j); FbxVector4 pos = lControlPoints[lControlPointIndex]; current_model[vertex_index].x = pos.mData[0] - pivot_offset[0]; current_model[vertex_index].y = pos.mData[1] - pivot_offset[1]; current_model[vertex_index].z = pos.mData[2]- pivot_offset[2]; FbxVector4 vertex_normal; pMesh->GetPolygonVertexNormal(i,j, vertex_normal); current_model[vertex_index].nx = vertex_normal.mData[0]; current_model[vertex_index].ny = vertex_normal.mData[1]; current_model[vertex_index].nz = vertex_normal.mData[2]; //read in UV data FbxStringList lUVSetNameList; pMesh->GetUVSetNames(lUVSetNameList); //get lUVSetIndex-th uv set const char* lUVSetName = lUVSetNameList.GetStringAt(0); const FbxGeometryElementUV* lUVElement = pMesh->GetElementUV(lUVSetName); if(!lUVElement) continue; // only support mapping mode eByPolygonVertex and eByControlPoint if( lUVElement->GetMappingMode() != FbxGeometryElement::eByPolygonVertex && lUVElement->GetMappingMode() != FbxGeometryElement::eByControlPoint ) return; //index array, where holds the index referenced to the uv data const bool lUseIndex = lUVElement->GetReferenceMode() != FbxGeometryElement::eDirect; const int lIndexCount= (lUseIndex) ? lUVElement->GetIndexArray().GetCount() : 0; FbxVector2 lUVValue; //get the index of the current vertex in control points array int lPolyVertIndex = pMesh->GetPolygonVertex(i,j); //the UV index depends on the reference mode //int lUVIndex = lUseIndex ? lUVElement->GetIndexArray().GetAt(lPolyVertIndex) : lPolyVertIndex; int lUVIndex = pMesh->GetTextureUVIndex(i, j); lUVValue = lUVElement->GetDirectArray().GetAt(lUVIndex); current_model[vertex_index].tu = (float)lUVValue.mData[0]; current_model[vertex_index].tv = (float)lUVValue.mData[1]; vertex_index ++; } } float v1[3], v2[3], v3[3]; v1[0] = current_model[vertex_index - 3].x; v1[1] = current_model[vertex_index - 3].y; v1[2] = current_model[vertex_index - 3].z; v2[0] = current_model[vertex_index - 2].x; v2[1] = current_model[vertex_index - 2].y; v2[2] = current_model[vertex_index - 2].z; v3[0] = current_model[vertex_index - 1].x; v3[1] = current_model[vertex_index - 1].y; v3[2] = current_model[vertex_index - 1].z; collision_model->addTriangle(v1,v2,v3);

Read the article

NHibernate Pitfalls: Custom Types and Detecting Changes

- by Ricardo Peres

This is part of a series of posts about NHibernate Pitfalls. See the entire collection here. NHibernate supports the declaration of properties of user-defined types, that is, not entities, collections or primitive types. These are used for mapping a database columns, of any type, into a different type, which may not even be an entity; think, for example, of a custom user type that converts a BLOB column into an Image. User types must implement interface NHibernate.UserTypes.IUserType. This interface specifies an Equals method that is used for comparing two instances of the user type. If this method returns false, the entity is marked as dirty, and, when the session is flushed, will trigger an UPDATE. So, in your custom user type, you must implement this carefully so that it is not mistakenly considered changed. For example, you can cache the original column value inside of it, and compare it with the one in the other instance. Let’s see an example implementation of a custom user type that converts a Byte[] from a BLOB column into an Image: 1: [Serializable] 2: public sealed class ImageUserType : IUserType 3: { 4: private Byte[] data = null; 5: 6: public ImageUserType() 7: { 8: this.ImageFormat = ImageFormat.Png; 9: } 10: 11: public ImageFormat ImageFormat 12: { 13: get; 14: set; 15: } 16: 17: public Boolean IsMutable 18: { 19: get 20: { 21: return (true); 22: } 23: } 24: 25: public Object Assemble(Object cached, Object owner) 26: { 27: return (cached); 28: } 29: 30: public Object DeepCopy(Object value) 31: { 32: return (value); 33: } 34: 35: public Object Disassemble(Object value) 36: { 37: return (value); 38: } 39: 40: public new Boolean Equals(Object x, Object y) 41: { 42: return (Object.Equals(x, y)); 43: } 44: 45: public Int32 GetHashCode(Object x) 46: { 47: return ((x != null) ? x.GetHashCode() : 0); 48: } 49: 50: public override Int32 GetHashCode() 51: { 52: return ((this.data != null) ? this.data.GetHashCode() : 0); 53: } 54: 55: public override Boolean Equals(Object obj) 56: { 57: ImageUserType other = obj as ImageUserType; 58: 59: if (other == null) 60: { 61: return (false); 62: } 63: 64: if (Object.ReferenceEquals(this, other) == true) 65: { 66: return (true); 67: } 68: 69: return (this.data.SequenceEqual(other.data)); 70: } 71: 72: public Object NullSafeGet(IDataReader rs, String[] names, Object owner) 73: { 74: Int32 index = rs.GetOrdinal(names[0]); 75: Byte[] data = rs.GetValue(index) as Byte[]; 76: 77: this.data = data as Byte[]; 78: 79: if (data == null) 80: { 81: return (null); 82: } 83: 84: using (MemoryStream stream = new MemoryStream(this.data ?? new Byte[0])) 85: { 86: return (Image.FromStream(stream)); 87: } 88: } 89: 90: public void NullSafeSet(IDbCommand cmd, Object value, Int32 index) 91: { 92: if (value != null) 93: { 94: Image data = value as Image; 95: 96: using (MemoryStream stream = new MemoryStream()) 97: { 98: data.Save(stream, this.ImageFormat); 99: value = stream.ToArray(); 100: } 101: } 102: 103: (cmd.Parameters[index] as DbParameter).Value = value ?? DBNull.Value; 104: } 105: 106: public Object Replace(Object original, Object target, Object owner) 107: { 108: return (original); 109: } 110: 111: public Type ReturnedType 112: { 113: get 114: { 115: return (typeof(Image)); 116: } 117: } 118: 119: public SqlType[] SqlTypes 120: { 121: get 122: { 123: return (new SqlType[] { new SqlType(DbType.Binary) }); 124: } 125: } 126: } In this case, we need to cache the original Byte[] data because it’s not easy to compare two Image instances, unless, of course, they are the same.

Read the article

SQL to select random mix of rows fairly [migrated]

- by Matt Sieker

Here's my problem: I have a set of tables in a database populated with data from a client that contains product information. In addition to the basic product information, there is also information about the manufacturer, and categories for those products (a product can be in one or more categories). These categories are then referred to as "Product Categories", and which stores these products are available at. These tables are updated once a week from a feed from the customer. Since for our purposes, some of the product categories are the same, or closely related for our purposes, there is another level of categories called "General Categories", a general category can have one or more product categories. For the scope of these tables, here's some rough numbers: Data Tables: Products: 475,000 Manufacturers: 1300 Stores: 150 General Categories: 245 Product Categories: 500 Mapping Tables: Product Category -> Product: 655,000 Stores -> Products: 50,000,000 Now, for the actual problem: As part of our software, we need to select n random products, given a store and a general category. However, we also need to ensure a good mix of manufacturers, as in some categories, a single manufacturer dominates the results, and selecting rows at random causes the results to strongly favor that manufacturer. The solution that is currently in place, works for most cases, involves selecting all of the rows that match the store and category criteria, partition them on manufacturer, and include their row number from within their partition, then select from that where the row number for that manufacturer is less than n, and use ROWCOUNT to clamp the total rows returned to n. This query looks something like this: SET ROWCOUNT 6 select p.Id, GeneralCategory_Id, Product_Id, ISNULL(m.DisplayName, m.Name) AS Vendor, MSRP, MemberPrice, FamilyImageName from (select p.Id, gc.Id GeneralCategory_Id, p.Id Product_Id, ctp.Store_id, Manufacturer_id, ROW_NUMBER() OVER (PARTITION BY Manufacturer_id ORDER BY NEWID()) AS 'VendorOrder', MSRP, MemberPrice, FamilyImageName from GeneralCategory gc inner join GeneralCategoriesToProductCategories gctpc ON gc.Id=gctpc.GeneralCategory_Id inner join ProductCategoryToProduct pctp on gctpc.ProductCategory_Id = pctp.ProductCategory_Id inner join Product p on p.Id = pctp.Product_Id inner join StoreToProduct ctp on p.Id = ctp.Product_id where gc.Id = @GeneralCategory and ctp.Store_id=@StoreId and p.Active=1 and p.MemberPrice >0) p inner join Manufacturer m on m.Id = p.Manufacturer_id where VendorOrder <=6 order by NEWID() SET ROWCOUNT 0 (I've tried to somewhat format it to make it cleaner, but I don't think it really helps) Running this query with an execution plan shows that for the majority of these tables, it's doing a Clustered Index Seek. There are two operations that take up roughly 90% of the time: Index Seek (Nonclustered) on StoreToProduct: 17%. This table just contains the key of the store, and the key of the product. It seems that NHibernate decided not to make a composite key when making this table, but I'm not concerned about this at this point, as compared to the other seek... Clustered Index Seek on Product: 69%. I really have no clue how I could make this one more performant. On categories without a lot of products, performance is acceptable (<50ms), however larger categories can take a few hundred ms, with the largest category taking 3s (which has about 170k products). It seems I have two ways to go from this point: Somehow optimize the existing query and table indices to lower the query time. As almost every expensive operation is already a clustered index scan, I don't know what could be done there. The inner query could be tuned to not return all of the possible rows for that category, but I am unsure how to do this, and maintain the requirements (random products, with a good mix of manufacturers) Denormalize this data for the purpose of this query when doing the once a week import. However, I am unsure how to do this and maintain the requirements. Does anyone have any input on either of these items?

Read the article

Pro/con of using Angular directives for complex form validation/ GUI manipulation

- by tengen

I am building a new SPA front end to replace an existing enterprise's legacy hodgepodge of systems that are outdated and in need of updating. I am new to angular, and wanted to see if the community could give me some perspective. I'll state my problem, and then ask my question. I have to generate several series of check boxes based on data from a .js include, with data like this: $scope.fieldMappings.investmentObjectiveMap = [ {'id':"CAPITAL PRESERVATION", 'name':"Capital Preservation"}, {'id':"STABLE", 'name':"Moderate"}, {'id':"BALANCED", 'name':"Moderate Growth"}, // etc {'id':"NONE", 'name':"None"} ]; The checkboxes are created using an ng-repeat, like this: <div ng-repeat="investmentObjective in fieldMappings.investmentObjectiveMap"> ... </div> However, I needed the values represented by the checkboxes to map to a different model (not just 2-way-bound to the fieldmappings object). To accomplish this, I created a directive, which accepts a destination array destarray which is eventually mapped to the model. I also know I need to handle some very specific gui controls, such as unchecking "None" if anything else gets checked, or checking "None" if everything else gets unchecked. Also, "None" won't be an option in every group of checkboxes, so the directive needs to be generic enough to accept a validation function that can fiddle with the checked state of the checkbox group's inputs based on what's already clicked, but smart enough not to break if there is no option called "NONE". I started to do that by adding an ng-click which invoked a function in the controller, but in looking around Stack Overflow, I read people saying that its bad to put DOM manipulation code inside your controller - it should go in directives. So do I need another directive? So far: (html): <input my-checkbox-group type="checkbox" fieldobj="investmentObjective" ng-click="validationfunc()" validationfunc="clearOnNone()" destarray="investor.investmentObjective" /> Directive code: .directive("myCheckboxGroup", function () { return { restrict: "A", scope: { destarray: "=", // the source of all the checkbox values fieldobj: "=", // the array the values came from validationfunc: "&" // the function to be called for validation (optional) }, link: function (scope, elem, attrs) { if (scope.destarray.indexOf(scope.fieldobj.id) !== -1) { elem[0].checked = true; } elem.bind('click', function () { var index = scope.destarray.indexOf(scope.fieldobj.id); if (elem[0].checked) { if (index === -1) { scope.destarray.push(scope.fieldobj.id); } } else { if (index !== -1) { scope.destarray.splice(index, 1); } } }); } }; }) .js controller snippet: .controller( 'SuitabilityCtrl', ['$scope', function ( $scope ) { $scope.clearOnNone = function() { // naughty jQuery DOM manipulation code that // looks at checkboxes and checks/unchecks as needed }; The above code is done and works fine, except the naughty jquery code in clearOnNone(), which is why I wrote this question. And here is my question: after ALL this, I think to myself - I could be done already if I just manually handled all this GUI logic and validation junk with jQuery written in my controller. At what point does it become foolish to write these complicated directives that future developers will have to puzzle over more than if I had just written jQuery code that 99% of us would understand with a glance? How do other developers draw the line? I see this all over Stack Overflow. For example, this question seems like it could be answered with a dozen lines of straightforward jQuery, yet he has opted to do it the angular way, with a directive and a partial... it seems like a lot of work for a simple problem. Specifically, I suppose I would like to know: how SHOULD I be writing the code that checks whether "None" has been selected (if it exists as an option in this group of checkboxes), and then check/uncheck the other boxes accordingly? A more complex directive? I can't believe I'm the only developer that is having to implement code that is more complex than needed just to satisfy an opinionated framework.

Read the article

User Input That Involves A ' ' Causes A Substring Out Of Range Error

- by Greenhouse Gases

Hi Stackoverflow people. You have already helped me quite a bit but near the end of writing this program I have somewhat of a bug. You see in order to read in city names with a space in from a text file I use a '/' that is then replaced by the program for a ' ' (and when the serializer runs the opposite happens for next time the program is run). The problem is when a user inputs a name too add, search for, or delete that contains a space, for instance 'New York' I get a Debug Assertion Error with a substring out of range expression. I have a feeling it's to do with my correctCase function, or setElementsNull that looks at the string until it experiences a null element in the array, however ' ' is not null so I'm not sure how to fix this and I'm going a bit insane. Any help would be much appreciated. Here is my code: // U08221.cpp : main project file. #include "stdafx.h" #include <_iostream> #include <_string> #include <_fstream> #include <_cmath> using namespace std; class locationNode { public: string nodeCityName; double nodeLati; double nodeLongi; locationNode* Next; locationNode(string nameOf, double lat, double lon) { this->nodeCityName = nameOf; this->nodeLati = lat; this->nodeLongi = lon; this->Next = NULL; } locationNode() // NULL constructor { } void swapProps(locationNode *node2) { locationNode place; place.nodeCityName = this->nodeCityName; place.nodeLati = this->nodeLati; place.nodeLongi = this->nodeLongi; this->nodeCityName = node2->nodeCityName; this->nodeLati = node2->nodeLati; this->nodeLongi = node2->nodeLongi; node2->nodeCityName = place.nodeCityName; node2->nodeLati = place.nodeLati; node2->nodeLongi = place.nodeLongi; } void modify(string name) { this->nodeCityName = name; } void modify(double latlon, int mod) { switch(mod) { case 2: this->nodeLati = latlon; break; case 3: this->nodeLongi = latlon; break; } } void correctCase() // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = this->nodeCityName[0], letVal; int n = 1; // variable for name index from second letter onwards if((this->nodeCityName[0] >90) && (this->nodeCityName[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter this->nodeCityName[0] = firstLetVal; } while(this->nodeCityName[n] != NULL) { if((this->nodeCityName[n] >= 65) && (this->nodeCityName[n] <= 90)) { if(this->nodeCityName[n - 1] != 32) { letVal = this->nodeCityName[n] + 32; this->nodeCityName[n] = letVal; } } n++; } } }; Here is the main part of the program: // U08221.cpp : main project file. #include "stdafx.h" #include "Locations2.h" #include <_iostream> #include <_string> #include <_fstream> #include <_cmath> using namespace std; #define pi 3.14159265358979323846264338327950288 #define radius 6371 #define gig 1073741824 //size of a gigabyte in bytes int n = 0,x, locationCount = 0, MAX_SIZE = 35 , g = 0, i = 0, modKey = 0, xx; string cityNameInput, alter; char targetCity[35], skipKey = ' '; double lat1, lon1, lat2, lon2, dist, dummy, modVal, result; bool acceptedInput = false, match = false, nodeExists = false;// note: addLocation(), set to true to enable user input as opposed to txt file locationNode *temp, *temp2, *example, *seek, *bridge, *start_ptr = NULL; class Menu { int junction; public: /* Convert decimal degrees to radians */ public: void setElementsNull(char cityParam[]) { int y=0; while(cityParam[y] != NULL) { y++; } while(y < MAX_SIZE) { cityParam[y] = NULL; y++; } } void correctCase(string name) // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = name[0], letVal; int n = 1; // variable for name index from second letter onwards if((name[0] >90) && (name[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter name[0] = firstLetVal; } while(name[n] != NULL) { if((name[n] >= 65) && (name[n] <= 90)) { letVal = name[n] + 32; name[n] = letVal; } n++; } for(n = 0; targetCity[n] != NULL; n++) { targetCity[n] = name[n]; } } bool nodeExistTest(char targetCity[]) // see if entry is present in the database { match = false; seek = start_ptr; int letters = 0, letters2 = 0, x = 0, y = 0; while(targetCity[y] != NULL) { letters2++; y++; } while(x <= locationCount) // locationCount is number of entries currently in list { y=0, letters = 0; while(seek->nodeCityName[y] != NULL) // count letters in the current name { letters++; y++; } if(letters == letters2) // same amount of letters in the name { y = 0; while(y <= letters) // compare each letter against one another { if(targetCity[y] == seek->nodeCityName[y]) { match = true; y++; } else { match = false; y = letters + 1; // no match, terminate comparison } } } if(match) { x = locationCount + 1; //found match so terminate loop } else{ if(seek->Next != NULL) { bridge = seek; seek = seek->Next; x++; } else { x = locationCount + 1; // end of list so terminate loop } } } return match; } double deg2rad(double deg) { return (deg * pi / 180); } /* Convert radians to decimal degrees */ double rad2deg(double rad) { return (rad * 180 / pi); } /* Do the calculation */ double distance(double lat1, double lon1, double lat2, double lon2, double dist) { dist = sin(deg2rad(lat1)) * sin(deg2rad(lat2)) + cos(deg2rad(lat1)) * cos(deg2rad(lat2)) * cos(deg2rad(lon1 - lon2)); dist = acos(dist); dist = rad2deg(dist); dist = (radius * pi * dist) / 180; return dist; } void serialise() { // Serialize to format that can be written to text file fstream outfile; outfile.open("locations.txt",ios::out); temp = start_ptr; do { for(xx = 0; temp->nodeCityName[xx] != NULL; xx++) { if(temp->nodeCityName[xx] == 32) { temp->nodeCityName[xx] = 47; } } outfile << endl << temp->nodeCityName<< " "; outfile<<temp->nodeLati<< " "; outfile<<temp->nodeLongi; temp = temp->Next; }while(temp != NULL); outfile.close(); } void sortList() // do this { int changes = 1; locationNode *node1, *node2; while(changes > 0) // while changes are still being made to the list execute { node1 = start_ptr; node2 = node1->Next; changes = 0; do { xx = 1; if(node1->nodeCityName[0] > node2->nodeCityName[0]) //compare first letter of name with next in list { node1->swapProps(node2); // should come after the next in the list changes++; } else if(node1->nodeCityName[0] == node2->nodeCityName[0]) // if same first letter { while(node1->nodeCityName[xx] == node2->nodeCityName[xx]) // check next letter of name { if((node1->nodeCityName[xx + 1] != NULL) && (node2->nodeCityName[xx + 1] != NULL)) // check next letter until not the same { xx++; } else break; } if(node1->nodeCityName[xx] > node2->nodeCityName[xx]) { node1->swapProps(node2); // should come after the next in the list changes++; } } node1 = node2; node2 = node2->Next; // move to next pair in list } while(node2 != NULL); } } void initialise() { cout << "Populating List..."; ifstream inputFile; inputFile.open ("locations.txt", ios::in); char inputName[35] = " "; double inputLati = 0, inputLongi = 0; //temp = new locationNode(inputName, inputLati, inputLongi); do { inputFile.get(inputName, 35, ' '); inputFile >> inputLati; inputFile >> inputLongi; if(inputName[0] == 10 || 13) //remove linefeed from input { for(int i = 0; inputName[i] != NULL; i++) { inputName[i] = inputName[i + 1]; } } for(xx = 0; inputName[xx] != NULL; xx++) { if(inputName[xx] == 47) // if it is a '/' { inputName[xx] = 32; // replace it for a space } } temp = new locationNode(inputName, inputLati, inputLongi); if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list } while(!inputFile.eof()); cout << "Successful!" << endl << "List contains: " << locationCount << " entries" << endl; inputFile.close(); cout << endl << "*******************************************************************" << endl << "DISTANCE CALCULATOR v2.0\tAuthors: Darius Hodaei, Joe Clifton" << endl; } void menuInput() { char menuChoice = ' '; while(menuChoice != 'Q') { // Menu if(skipKey != 'X') // This is set by case 'S' below if a searched term does not exist but wants to be added { cout << endl << "*******************************************************************" << endl; cout << "Please enter a choice for the menu..." << endl << endl; cout << "(P) To print out the list" << endl << "(O) To order the list alphabetically" << endl << "(A) To add a location" << endl << "(D) To delete a record" << endl << "(C) To calculate distance between two points" << endl << "(S) To search for a location in the list" << endl << "(M) To check memory usage" << endl << "(U) To update a record" << endl << "(Q) To quit" << endl; cout << endl << "*******************************************************************" << endl; cin >> menuChoice; if(menuChoice >= 97) { menuChoice = menuChoice - 32; // Turn the lower case letter into an upper case letter } } skipKey = ' '; //Reset skipKey so that it does not skip the menu switch(menuChoice) { case 'P': temp = start_ptr; // set temp to the start of the list do { if (temp == NULL) { cout << "You have reached the end of the database" << endl; } else { // Display details for what temp points to at that stage cout << "Location : " << temp->nodeCityName << endl; cout << "Latitude : " << temp->nodeLati << endl; cout << "Longitude : " << temp->nodeLongi << endl; cout << endl; // Move on to next locationNode if one exists temp = temp->Next; } } while (temp != NULL); break; case 'O': { sortList(); // pass by reference??? cout << "List reordered alphabetically" << endl; } break; case 'A': char cityName[35]; double lati, longi; cout << endl << "Enter the name of the location: "; cin >> cityName; for(xx = 0; cityName[xx] != NULL; xx++) { if(cityName[xx] == 47) // if it is a '/' { cityName[xx] = 32; // replace it for a space } } if(!nodeExistTest(cityName)) { cout << endl << "Please enter the latitude value for this location: "; cin >> lati; cout << endl << "Please enter the longitude value for this location: "; cin >> longi; cout << endl; temp = new locationNode(cityName, lati, longi); temp->correctCase(); //start_ptr allignment if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list cout << "Location sucessfully added to the database! There are " << locationCount << " location(s) stored" << endl; } else { cout << "Node is already present in the list and so cannot be added again" << endl; } break; case 'D': { junction = 0; locationNode *place; cout << "Enter the name of the city you wish to remove" << endl; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); for(xx = 0; targetCity[xx] != NULL; xx++) { if(targetCity[xx] == 47) { targetCity[xx] = 32; } } if(nodeExistTest(targetCity)) //if this node does exist { if(seek == start_ptr) // if it is the first in the list { junction = 1; } if(seek->Next == NULL) // if it is last in the list { junction = 2; } switch(junction) // will alter list accordingly dependant on where the searched for link is { case 1: start_ptr = start_ptr->Next; delete seek; --locationCount; break; case 2: place = seek; seek = bridge; seek->Next = NULL; delete place; --locationCount; break; default: bridge->Next = seek->Next; delete seek; --locationCount; break; } cout << endl << "Link deleted. There are now " << locationCount << " locations." << endl; } else { cout << "That entry does not currently exist" << endl << endl << endl; } } break; case 'C': { char city1[35], city2[35]; cout << "Enter the first city name" << endl; cin >> city1; setElementsNull(city1); correctCase(targetCity); if(nodeExistTest(city1)) { lat1 = seek->nodeLati; lon1 = seek->nodeLongi; cout << "Lati = " << seek->nodeLati << endl << "Longi = " << seek->nodeLongi << endl << endl; } cout << "Enter the second city name" << endl; cin >> city2; setElementsNull(city2); correctCase(targetCity); if(nodeExistTest(city2)) { lat2 = seek->nodeLati; lon2 = seek->nodeLongi; cout << "Lati = " << seek->nodeLati << endl << "Longi = " << seek->nodeLongi << endl << endl; } result = distance (lat1, lon1, lat2, lon2, dist); cout << "The distance between these two locations is " << result << " kilometres." << endl; } break; case 'S': { char choice; cout << "Enter search term..." << endl; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); if(nodeExistTest(targetCity)) { cout << "Latitude: " << seek->nodeLati << endl << "Longitude: " << seek->nodeLongi << endl; } else { cout << "Sorry, that city is not currently present in the list." << endl << "Would you like to add this city now Y/N?" << endl; cin >> choice; /*while(choice != ('Y' || 'N')) { cout << "Please enter a valid choice..." << endl; cin >> choice; }*/ switch(choice) { case 'Y': skipKey = 'X'; menuChoice = 'A'; break; case 'N': break; default : cout << "Invalid choice" << endl; break; } } break; } case 'M': { cout << "Locations currently stored: " << locationCount << endl << "Memory used for this: " << (sizeof(start_ptr) * locationCount) << " bytes" << endl << endl << "You can store " << ((gig - (sizeof(start_ptr) * locationCount)) / sizeof(start_ptr)) << " more locations" << endl ; break; } case 'U': { cout << "Enter the name of the Location you would like to update: "; cin >> targetCity; setElementsNull(targetCity); correctCase(targetCity); if(nodeExistTest(targetCity)) { cout << "Select (1) to alter City Name, (2) to alter Longitude, (3) to alter Latitude" << endl; cin >> modKey; switch(modKey) { case 1: cout << "Enter the new name: "; cin >> alter; cout << endl; seek->modify(alter); break; case 2: cout << "Enter the new latitude: "; cin >> modVal; cout << endl; seek->modify(modVal, modKey); break; case 3: cout << "Enter the new longitude: "; cin >> modVal; cout << endl; seek->modify(modVal, modKey); break; default: break; } } else cout << "Location not found" << endl; break; } } } } }; int main(array<System::String ^> ^args) { Menu mm; //mm.initialise(); mm.menuInput(); mm.serialise(); }

Read the article

High Load mysql on Debian server stops every day. Why?

- by Oleg Abrazhaev

I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ? I'm already try mysqltuner and tunung-primer.sh , but they marked all green. Mysqltuner output mysqltuner >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.24-9-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 112G (Tables: 1528) [--] Data in InnoDB tables: 39G (Tables: 340) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 344 -------- Performance Metrics ------------------------------------------------- [--] Up for: 8h 18m 33s (14M q [478.333 qps], 259K conn, TX: 9B, RX: 5B) [--] Reads / Writes: 84% / 16% [--] Total buffers: 10.5G global + 81.1M per thread (200 max threads) [OK] Maximum possible memory usage: 26.3G (83% of installed RAM) [OK] Slow queries: 1% (259K/14M) [!!] Highest connection usage: 100% (201/200) [OK] Key buffer size / total MyISAM indexes: 1.5G/5.6G [OK] Key buffer hit rate: 100.0% (6B cached / 1M reads) [OK] Query cache efficiency: 74.3% (8M cached / 11M selects) [OK] Query cache prunes per day: 0 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 247K sorts) [!!] Joins performed without indexes: 106025 [!!] Temporary tables created on disk: 49% (351K on disk / 715K total) [OK] Thread cache hit rate: 99% (249 created / 259K connections) [!!] Table cache hit rate: 15% (2K open / 13K opened) [OK] Open file limit used: 15% (3K/20K) [OK] Table locks acquired immediately: 99% (4M immediate / 4M locks) [!!] InnoDB data size / buffer pool: 39.4G/5.9G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce or eliminate persistent connections to reduce connection usage Adjust your join queries to always utilize indexes Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Variables to adjust: max_connections (> 200) wait_timeout (< 600) interactive_timeout (< 600) join_buffer_size (> 5.0M, or always use indexes with joins) table_cache (> 10000) innodb_buffer_pool_size (>= 39G) Mysql primer output -- MYSQL PERFORMANCE TUNING PRIMER -- - By: Matthew Montgomery - MySQL Version 5.5.24-9-log x86_64 Uptime = 0 days 8 hrs 20 min 50 sec Avg. qps = 478 Total Questions = 14369568 Threads Connected = 16 Warning: Server has not been running for at least 48hrs. It may not be safe to use these recommendations To find out more information on how each of these runtime variables effects performance visit: http://dev.mysql.com/doc/refman/5.5/en/server-system-variables.html Visit http://www.mysql.com/products/enterprise/advisors.html for info about MySQL's Enterprise Monitoring and Advisory Service SLOW QUERIES The slow query log is enabled. Current long_query_time = 1.000000 sec. You have 260626 out of 14369701 that take longer than 1.000000 sec. to complete Your long_query_time seems to be fine BINARY UPDATE LOG The binary update log is enabled Binlog sync is not enabled, you could loose binlog records during a server crash WORKER THREADS Current thread_cache_size = 50 Current threads_cached = 45 Current threads_per_sec = 0 Historic threads_per_sec = 0 Your thread_cache_size is fine MAX CONNECTIONS Current max_connections = 200 Current threads_connected = 11 Historic max_used_connections = 201 The number of used connections is 100% of the configured maximum. You should raise max_connections INNODB STATUS Current InnoDB index space = 214 M Current InnoDB data space = 39.40 G Current InnoDB buffer pool free = 0 % Current innodb_buffer_pool_size = 5.85 G Depending on how much space your innodb indexes take up it may be safe to increase this value to up to 2 / 3 of total system memory MEMORY USAGE Max Memory Ever Allocated : 23.46 G Configured Max Per-thread Buffers : 15.84 G Configured Max Global Buffers : 7.54 G Configured Max Memory Limit : 23.39 G Physical Memory : 31.40 G Max memory limit seem to be within acceptable norms KEY BUFFER Current MyISAM index space = 5.61 G Current key_buffer_size = 1.47 G Key cache miss rate is 1 : 5578 Key buffer free ratio = 77 % Your key_buffer_size seems to be fine QUERY CACHE Query cache is enabled Current query_cache_size = 200 M Current query_cache_used = 101 M Current query_cache_limit = 50 M Current Query cache Memory fill ratio = 50.59 % Current query_cache_min_res_unit = 4 K MySQL won't cache query results that are larger than query_cache_limit in size SORT OPERATIONS Current sort_buffer_size = 64 M Current read_rnd_buffer_size = 256 K Sort buffer seems to be fine JOINS Current join_buffer_size = 5.00 M You have had 106606 queries where a join could not use an index properly You have had 8 joins without keys that check for key usage after each row join_buffer_size >= 4 M This is not advised You should enable "log-queries-not-using-indexes" Then look for non indexed joins in the slow query log. OPEN FILES LIMIT Current open_files_limit = 20210 files The open_files_limit should typically be set to at least 2x-3x that of table_cache if you have heavy MyISAM usage. Your open_files_limit value seems to be fine TABLE CACHE Current table_open_cache = 10000 tables Current table_definition_cache = 2000 tables You have a total of 1910 tables You have 2151 open tables. The table_cache value seems to be fine TEMP TABLES Current max_heap_table_size = 2.92 G Current tmp_table_size = 2.92 G Of 366426 temp tables, 49% were created on disk Perhaps you should increase your tmp_table_size and/or max_heap_table_size to reduce the number of disk-based temporary tables Note! BLOB and TEXT columns are not allow in memory tables. If you are using these columns raising these values might not impact your ratio of on disk temp tables. TABLE SCANS Current read_buffer_size = 3 M Current table scan ratio = 2846 : 1 read_buffer_size seems to be fine TABLE LOCKING Current Lock Wait ratio = 1 : 185 You may benefit from selective use of InnoDB. If you have long running SELECT's against MyISAM tables and perform frequent updates consider setting 'low_priority_updates=1'

Read the article

Issues with Apache redirect to www-prefixed URL

- by lamp_scaler

I have a website with domain mysite.com. I would like to have it so that if a user types in "mysite.com" it will redirect to "www.mysite.com". Additionally, "mysite.com/subdir" will also redirect to "www.mysite.com/subdir". I've looked and made changes with vhosts and also rewrites, but it's not working for the "mysite.com/subdir"-"www.mysite.com/subdir" case. Every time I type in "mysite.com/subdir", it will redirect to "www.mysite.com". Only "www.mysite.com/subdir" works. Not sure how to troubleshoot this. I turned on rewrite logs and didn't see anything obvious, yet. This is my config files so far. Please let me know what I'm missing. Thanks! FYI: I'm using CentOS 5.4, nginx 1.2.0 on top of Apache 2.2.3. The site itself is built with CodeIgniter framework. http.conf: ServerTokens Prod ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 120 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 15 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 10 ServerLimit 256 MaxClients 60 MaxRequestsPerChild 10000 #StartServers 8 #MinSpareServers 5 #MaxSpareServers 20 #ServerLimit 256 #MaxClients 256 #MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Listen 69 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so #rpaf settings LoadModule rpaf_module modules/mod_rpaf-2.0.so RPAFenable On RPAFproxy_ips 127.0.0.1 RPAFsethostname On # The header where the real client IP address is stored. RPAFheader X-Forwarded-For Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost ServerName www.mysite.com:80 UseCanonicalName Off DocumentRoot "/var/www/html" <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <IfModule mod_userdir.c> UserDir disable </IfModule> DirectoryIndex index.html index.html.var AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> <DirectoryMatch "^/.*/\.svn/"> Order deny,allow Deny from all </DirectoryMatch> TypesConfig /etc/mime.types DefaultType text/plain <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature Off Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> <IfModule mod_dav_fs.c> DAVLockDB /var/lib/dav/lockdb </IfModule> ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz ReadmeName README.html HeaderName HEADER.html IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en zh-CN zh-TW ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType text/x-component .htc AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> </IfModule> </IfModule> BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully vhost.conf: NameVirtualHost *:69 <VirtualHost *:69> ServerName mysite.com ServerAlias vip.mysite.com Redirect / http://www.mysite.com/ </VirtualHost> <VirtualHost *:69> DocumentRoot /home/mysite/mysite/www ServerName www.mysite.com </VirtualHost> <VirtualHost *:69> DocumentRoot /home/mysite/mysite/www/assets ServerName static.mysite.com </VirtualHost> <VirtualHost *:69> DocumentRoot /home/mysite/admin/www ServerName admin.mysite.com </VirtualHost> <VirtualHost *:69> DocumentRoot /home/other/trunk/www ServerName othersite.com ServerAlias www.othersite.com </VirtualHost> <VirtualHost *:69> DocumentRoot /var/www/html ServerName test.mysite.com ServerAlias test2.mysite.com </VirtualHost> /home/mysite/mysite/www/.htaccess: RewriteEngine on # In my case all CI files are outside this web root, so we can # allow any files or directories that exist to be displayed directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # hide index.php RewriteRule .* index.php/$0 [L] # BEGIN Compress text files <ifModule mod_deflate.c> <filesMatch "\.(css|js|x?html?|php)$"> SetOutputFilter DEFLATE </filesMatch> </ifModule> # END Compress text files # BEGIN Expire headers <ifModule mod_expires.c> ExpiresActive On ExpiresDefault "access plus 1 seconds" ExpiresByType image/x-icon "access plus 2592000 seconds" ExpiresByType image/jpeg "access plus 2592000 seconds" ExpiresByType image/png "access plus 2592000 seconds" ExpiresByType image/gif "access plus 2592000 seconds" ExpiresByType application/x-shockwave-flash "access plus 2592000 seconds" ExpiresByType text/css "access plus 604800 seconds" ExpiresByType text/javascript "access plus 604800 seconds" ExpiresByType application/javascript "access plus 604800 seconds" ExpiresByType application/x-javascript "access plus 604800 seconds" ExpiresByType application/xhtml+xml "access plus 600 seconds" </ifModule> # END Expire headers # BEGIN Cache-Control Headers <ifModule mod_headers.c> <filesMatch "\.(ico|jpe?g|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\.(css)$"> Header set Cache-Control "max-age=604800, public" </filesMatch> <filesMatch "\.(js)$"> Header set Cache-Control "max-age=604800, private" </filesMatch> </ifModule> # END Cache-Control Headers # BEGIN Turn ETags Off <ifModule mod_headers.c> Header unset ETag </ifModule> FileETag None # END Turn ETags Off /etc/nginx/conf.d/default.conf: server { listen 80; server_name static.mysite.com; location / { root /home/mysite/mysite/www/assets; index index.html index.htm; expires max; } } server { listen 80; server_name *.mysite.com www.mysite.com vip.mysite.com; #Set this larger if uploading big files client_max_body_size 5m; location / { proxy_pass http://127.0.0.1:69; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; #client_max_body_size 10m; client_body_buffer_size 128k; proxy_buffer_size 4k; proxy_buffers 4 32k; } }

Search Results

Search found 14037 results on 562 pages for 'alter index'.

Page 131/562 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138 | Next Page >

- by imran_ku07

- by pinaldave

- by Flo

- by cabhilash

- by pinaldave

- by vik20000in

- by pinaldave

- by Brendan Webster

- by Sid

- by Steve Michelotti

- by Brendan Webster

- by Johnm

- by Davide Mauri

- by keiki

- by Robert May

- by steveh99999

- by James

- by sqlworkshops

- by CmasterG

- by Ricardo Peres

- by Matt Sieker

- by tengen

- by Greenhouse Gases

- by Oleg Abrazhaev

- by lamp_scaler

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138 | Next Page >