Search Results

Search found 10285 results on 412 pages for 'cpu architecture'.

Page 131/412 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

  • Bad temperature sensors on Foxconn motherboard?

    - by Gawain
    I have a system with a Foxconn V400 series motherboard and AMD Athlon 3000+ processor. Ever since I got it a few years ago the fans (particularly the CPU fan) have been really loud. So recently I installed SpeedFan to see why they were running so fast. SpeedFan reported the CPU temperature to be 32C, and one motherboard sensor at about 26C. But the other two motherboard sensors were reporting 78C and 64C respectively. Naturally the fans were both maxed out because of this, with the CPU fan at 5800rpm and the case fan at 2400rpm. I opened the case and everything inside was literally cool to the touch, with the exception of the CPU heatsink which was slightly warm, but nowhere near 78C. It seems like the temperature sensors are either defective or being read incorrectly. Is there some way I can decrease my fan noise without risking damage to my processor? Some way to ignore those two temp sensors? Any help would be greatly appreciated.

    Read the article

  • udp expected behaviour not responding to test result

    - by ernst
    I have a local network topology that is structured as follows: three hosts and a switch in the middle. I am using a switch that supports 10,100,1000 Mbit/s full/half duplex connection. I have configured the hosts with a static ip 172.16.0.1-2-3/25. This is the output of ifconfig eth0 Link encap: Ethernet HWaddr ***** inet addr:172.16.0.3 Bcast:172.16.0.127 Mask:255.255.255.128 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 The output on H1 and H2 is perfectly matchable They are mutually reachable since i have tested the network with ping. I have forced the ethernet interface to work at 10M with ethtool -s eth0 speed 10 duplex full autoneg on this is the output of ethtool eth0 supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full S upported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Full Advertised pause frame use: Symmetric A dvertised auto-negotiation: Yes Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: g Wake-on: d Current message level: 0x000000ff (255) drv probe link timer ifdown ifup rx_err tx_err Link detected: yes – I am doing an experimental test using nttcp to calculate the GOODPUT in the case that H1 and H2 at the same time send data to H3. Since the three links have the same forced capability and the amount of arrving data speed is 10 from H1+10 from H2--20M to H3 it would be expected a bottleneck effect and, due to the non reliable nature of udp, a packet loss. But this doesn't appen since the output of nttcp application shows the same number of byte sended and received. this is the output of nttcp on h3 nttcp -T -r -u 172.16.0.2 & nttcp -T -r -u 172.16.0.1 [1] 4071 Bytes Real s CPU s Real-MBit/s CPU-MBit/s Calls Real-C/s CPU-C/s l 8388608 13.74 0.05 4.8848 1398.0140 2049 149.14 42684.8 Bytes Real s CPU s Real-MBit/s CPU-MBit/s Calls Real-C/s CPU-C/s l 8388608 14.02 0.05 4.7872 1398.0140 2049 146.17 42684.8 1 8388608 13.56 0.06 4.9500 1118.4065 2051 151.28 34181.1 1 8388608 13.89 0.06 4.8310 1198.3084 2051 147.65 36623.0 – How is this possible? Am i missing something? Any help will be gratefully apprecciated, Best regards

    Read the article

  • can I force server to always use turboboost?

    - by javapowered
    I'm using HP DL360p Gen8 with 2 * Xeon E5-2640. I do not load CPU 100%, i load it only ~10% and so I guess turboboost is not activated. However I'm using my server for trading so I absolutely don't care about CPU loading but I always want to process my data asap. So I want server to operate using maximum 3 GHz. I.e. 90% of CPU time I don't have anything to process. 10% of CPU time I have data to process. But I need to process it ASAP. I need every single microsecond. So I want server to operate always at maximum "turboboosted" mode. Is it possible?

    Read the article

  • Where is my problem? The P6X58D Premium Mobo, Windows 7, or other?

    - by Dylan Yaga
    I was having problems with my USB devices for an hour last night, and I am unable to determine the root cause of the problem. The two symptoms are: At seemingly random times (not consistently spaced by time or caused by any detectable event) my USB devices become "detached". Windows will play the USB disconnect sound and then the reconnect sound. The devices disconnected and then reconnected. My USB Keyboard will "stick" on one key for several seconds before processing any other keystroke made. The mouse also does not respond to clicks. I do not lose mouse movement or USB device connectivity. And after a moment of this several beeps will be emitted from the speakers. Hardware Specs: GFX Card: EVGA GeForce GTX 470 Superclocked 1280MB DDR5 PCIe Motherboard: ASUS P6X58D Premium Intel X58 Socket LGA1366 MB Processor: Intel Core i7-920 2.66Ghz 8M LGA1366 CPU Memory: Corsair Dominator 6144MB PC12800 DDR3 Storage: Hitachi 1TB Serial ATA HD 1600MHz 7200/32MB/SATA-3G Cooling: Corsair Hydro H50 CPU Liquid Cooler Case: Corsair Obsidian 800D Full Tower Case Power Supply: Corsair HX1000W 1000W Modular Power Supply Steps I have taken to narrow down the problem: Restarted the computer. - No change Changed USB port the Hub was connected to on the CPU. - No change Removed all devices from USB Hub and connected directly to CPU. - No change Used a different USB keyboard both in USB Hub and directly to CPU. - No change Disconnected and reconnected all cables. - No change Disassembled the Tower and determined if the USB headers were firmly connected. - No change Checked device manager for errors. Checked all USB devices. - Nothing flagged After an hour of frustration trying to narrow down the problem it appeared to disappear. But I am torn between it being a Mobo problem or an OS problem. Is there anything else I can do to narrow down the problem before a reformat and then eventually exchanging the Mobo?

    Read the article

  • Supermicro X8SIL-F with Enermax Modu82+ 625W PSU booting issue

    - by Richard Whitman
    I am assembling a custom PC. The configuration is below: Motherboard: Supermicro X8SIL-F Processor: Intel Xeon 3430 Power Supply: Enermax Modu82+ 625W. Memory: Kingston KVR1333D3LQ8R9S/8GEC 8GBx1 installed in DimmA1 This power switch: Frozen CPU switch When I turn on the PSU, the motherboard tries to start itself before I even push the power switch. The following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and this time it rotates for about 3-4 seconds before stopping. If I pull out the Power switch, and turn on the PSU, again the MB turns on itself and the following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and the system boots properly I am sure there is nothing wrong with any of the components, because I have two sets of identical components (2 MBs, 2 CPUs, 2 PSUs, 2 switches and so on). And both of the systems show the same symptoms. Why is the MB booting up by itself? Why does it fail to boot when the Power Switch is installed? Is something wrong with the type of Power Switch I am using? PS: the power switch is installed correctly, I have double checked the MB manual to make sure its connecting the right pins.

    Read the article

  • How to make a vm scale when demand for resource increases

    - by Cray XT3
    i am having a server with 16 virtual core and 24G RAM,using Xen virtualization and ubuntu as dom0 Created 4 VMs (in para mode),each with different applications. CPU Load vary on each vm,somtimes first vm reaches nearly 100% CPU and others under 25% or even less. So is there a way in which vm can get cpu from other vms when they are not actually using it or utilization is under 25%.Same in the case of RAM also. I am not sure whether i am mentioning Cloud here. Initially i would like to give every vm a single VCPU,but can scale up to 8 or more by taking cpu from other vms if they are not using it. Is there any kind of tool that makes vm to scale its resources when demand increases. Is cloudstack and openstack designed for these kind of purpose or is that just a GUI to manage VMs.

    Read the article

  • processes slow after some time of actively running

    - by Yervand Aghababyan
    i have several cron jobs running on an ubuntu machine. each one does some pretty heavy load stuff. The cron jobs are parsing files and the bigger the file the longer it takes them to parse it. The strange thing is that if i make the files too big ( like 30mb) the script kind of hangs. It starts processing them really enthusiastically but after some time (something like 5-10 minutes) the cpu usage of the process drops a lot and it gets into some "zombie" state. If prior to this the process in htop was using 70-80% of the CPU then after this drop occurs it slows down to something like 5-10%. the load average drops down as well. The status of the processes sometimes changes to D in htop, which AFAIR stands for zombie. Today i noticed the same behavior of processes of mysql when executing heavy queries (a query took something like 4 hours to execute). the cron jobs are mostly php and during their processing most of the CPU eats the php process and not mysql. so i think the issue is not with a specific language/program but with the way the processes are "managed". The only other place i've seen similar behavior was on my Amazon EC2 micro instance when after some aggressive use of CPU the CPU quota was taking effect and everything was slowing down dramatically. This is a dedicated machine running ubuntu. what may be the cause?

    Read the article

  • Logging violations of rules in limits.conf

    - by PaulDaviesC
    I am trying to log the details of the programs that where failed due to the limit cap defined in the limits.conf. My initial plan was to do it using the audit system. The idea was to track the system calls related to limits in the limits.conf that where failed. However the problem with this approach is that , it is not possible to track the violations of cpu time, since that violation do not involve failure of system calls. In the case of CPU time , one thing happens is that the program which violated the cpu time will be delivered a SIGXCPU. So my question is how should I go about logging the programs that violated CPU time? Also is there any limits.conf specific logs available?

    Read the article

  • How to reduce virtual memory by optimising my PHP code?

    - by iCeR
    My current code (see below) uses 147MB of virtual memory! My provider has allocated 100MB by default and the process is killed once run, causing an internal error. The code is utilising curl multi and must be able to loop with more than 150 iterations whilst still minimizing the virtual memory. The code below is only set at 150 iterations and still causes the internal server error. At 90 iterations the issue does not occur. How can I adjust my code to lower the resource use / virtual memory? Thanks! <?php function udate($format, $utimestamp = null) { if ($utimestamp === null) $utimestamp = microtime(true); $timestamp = floor($utimestamp); $milliseconds = round(($utimestamp - $timestamp) * 1000); return date(preg_replace('`(?<!\\\\)u`', $milliseconds, $format), $timestamp); } $url = 'https://www.testdomain.com/'; $curl_arr = array(); $master = curl_multi_init(); for($i=0; $i<150; $i++) { $curl_arr[$i] = curl_init(); curl_setopt($curl_arr[$i], CURLOPT_URL, $url); curl_setopt($curl_arr[$i], CURLOPT_RETURNTRANSFER, 1); curl_setopt($curl_arr[$i], CURLOPT_SSL_VERIFYHOST, FALSE); curl_setopt($curl_arr[$i], CURLOPT_SSL_VERIFYPEER, FALSE); curl_multi_add_handle($master, $curl_arr[$i]); } do { curl_multi_exec($master,$running); } while($running > 0); for($i=0; $i<150; $i++) { $results = curl_multi_getcontent ($curl_arr[$i]); $results = explode("<br>", $results); echo $results[0]; echo "<br>"; echo $results[1]; echo "<br>"; echo udate('H:i:s:u'); echo "<br><br>"; usleep(100000); } ?> Processor Information Total processors: 8 Processor #1 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #2 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #3 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #4 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #5 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #6 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #7 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Processor #8 Vendor GenuineIntel Name Intel(R) Xeon(R) CPU E5405 @ 2.00GHz Speed 1995.120 MHz Cache 6144 KB Memory Information Memory for crash kernel (0x0 to 0x0) notwithin permissible range Memory: 8302344k/9175040k available (2176k kernel code, 80272k reserved, 901k data, 228k init, 7466304k highmem) System Information Linux server3.server.com 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux Physical Disks SCSI device sda: 1952448512 512-byte hdwr sectors (999654 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 1952448512 512-byte hdwr sectors (999654 MB) sda: Write Protect is off sda: Mode Sense: 03 00 00 08 SCSI device sda: drive cache: write back sd 0:1:0:0: Attached scsi disk sda sd 4:0:0:0: Attached scsi removable disk sdb sd 0:1:0:0: Attached scsi generic sg4 type 0 sd 4:0:0:0: Attached scsi generic sg7 type 0 Current Memory Usage total used free shared buffers cached Mem: 8306672 7847384 459288 0 487912 6444548 -/+ buffers/cache: 914924 7391748 Swap: 4095992 496 4095496 Total: 12402664 7847880 4554784 Current Disk Usage Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 898G 307G 546G 36% / /dev/sda1 99M 19M 76M 20% /boot none 4.0G 0 4.0G 0% /dev/shm /var/tmpMnt 4.0G 1.8G 2.0G 48% /tmp

    Read the article

  • Firefox: Clear History Is SUPER EFFECTIVE?

    - by acidzombie24
    I'm seeing a performance problem on certain sites (like gmail) which clearing the history should not affect. Is this a website problem or a firefox problem and what can i do to fix it w/o clearing my history? Also as a webdeveloper i am interested in how to make this happen (or not happen). I'm using firefox 8 and i confirmed the problem by copying my profile to firefox 11 (portable). To reproduce go to gmail.com and sign in. Have your task manager open. Once you click signin or hit enter gmail will bring up your emails. Keep your eye on the CPU usage. I checked and right now on this machine its using all my CPU for 22seconds!!!! Yes. 22 seconds. Once i cleared my "browser & download history" Its <6seconds. WTF. I have no idea why or how the size of history and CPU usage when loading up gmail are correlated. I have firefox setup so it never clears the history. But... 22seconds is a disaster. Can someone explain why this is happening or a fix that isnt clearing my history? I tried visiting a few websites and only gmail eats up that much CPU. Most websites only take <5sec of max CPU. So maybe this is a gmail problem? Or a firefox problem that gmail happens to hit? I still dont understand why it happens. -edit- I forgot to mention places.sqlite is 90mb. I dont think that matters. I have a sqlite file 400mb which is pretty much 2 large tables. It has no performance issues

    Read the article

  • How to monitor an Amazon EC2 instance

    - by sektor
    Is there a way to monitor ec2 instances without using cloudwatch? I ask this since ec2 instances are basically VPS's, and using output from commands like top, vmstat, htop in scripts may not give the clear picture as the CPU cycles are shared between other instances as well. What should one keep in mind while monitoring CPU usage on a VPS?, should one have alerts based on top load or % of CPU used by user processes coupled with other factors like processes waiting on disk io, hardware interrupts?

    Read the article

  • When adding second processor to SQL Server, will it automatically balance the load?

    - by ddavis
    We have a SQL Server 2008 R2 (10.5) on a dedicated box with a single 2.4Ghz processor, which regularly runs at 70-80% CPU. We are going to be adding a significant number of users to the application and therefore want to add a second processor to the box (scale up). Will SQL Server automatically use the second processor to balance threads, or is there additional configuration that will need to be done? In other words, will adding the second processor drop my CPU usage to 35-40% per CPU, automatically balancing the load? Based on what I read here, it seems that it will: http://msdn.microsoft.com/en-us/library/ms181007.aspx However, I've read elsewhere that CPU performance gains can be made by assigning database tables to different filegroups, but I'm not sure we want to get that complicated at this point.

    Read the article

  • strange Kernel Process Threads taking over my AIX box....

    - by Paul
    When I check the Running Stats of my box I get the following: CPU User% Kern% Wait% Idle% Physc 0 37.5 57.4 0.0 5.1 0.01 2 0.0 18.3 0.0 81.7 0.00 3 0.0 22.5 0.0 77.5 0.00 4 0.0 17.0 0.0 83.0 0.00 5 0.0 20.5 0.0 79.5 0.00 6 0.0 33.7 0.0 66.3 0.00 7 0.0 4.4 0.0 95.6 0.00 8 0.0 19.3 0.0 80.7 0.00 9 0.0 22.3 0.0 77.7 0.00 10 0.0 19.2 0.0 80.8 0.00 1 0.0 1.3 0.0 98.7 0.00 11 0.0 21.8 0.0 78.2 0.00 21 0.0 62.9 0.0 37.1 0.00 12 0.0 21.1 0.0 78.9 0.00 13 0.0 22.7 0.0 77.3 0.00 14 0.0 18.1 0.0 81.9 0.00 15 0.0 21.2 0.0 78.8 0.00 16 0.0 19.1 0.0 80.9 0.00 The Kern% seems high to me and I cannot find a reason for this much Kernel activity.... Doing a deep dive into what User processes are doing I find nothing with significant CPU utilization even though TOPAS and SAR both show the same thing.... One CPU with 30-60 % user and every processor with 5-30% Kernel % utilization... What is my box doing??? here is a second sample of CPU % from TOPAS CPU User% Kern% Wait% Idle% Physc 0 67.8 31.4 0.1 0.7 0.14 2 0.0 18.2 0.0 81.8 0.00 3 0.0 20.3 0.0 79.7 0.00 4 0.0 17.3 0.0 82.7 0.00 5 0.0 20.7 0.0 79.3 0.00 6 0.0 39.2 0.0 60.8 0.00 7 0.0 5.0 0.0 95.0 0.00 8 0.0 17.9 0.0 82.1 0.00 9 0.0 22.0 0.0 78.0 0.00 10 0.0 18.0 0.0 82.0 0.00 1 0.0 0.7 0.0 99.3 0.02 11 0.0 21.7 0.0 78.3 0.00 21 0.0 21.7 0.0 78.3 0.00 12 0.0 17.0 0.0 83.0 0.00 13 0.0 21.1 0.0 78.9 0.00 14 0.0 17.8 0.0 82.2 0.00 15 0.0 21.8 0.0 78.2 0.00 16 0.0 17.6 0.0 82.4 0.00 Any ideas to help identify what is running in the Kernel Space would be great....

    Read the article

  • SQL SERVER – Find Max Worker Count using DMV – 32 Bit and 64 Bit

    - by pinaldave
    During several recent training courses, I found it very interesting that Worker Thread is not quite known to everyone despite the fact that it is a very important feature. At some point in the discussion, one of the attendees mentioned that we can double the Worker Thread if we double the CPU (add the same number of CPU that we have on current system). The same discussion has triggered this quick article. Here is the DMV which can be used to find out Max Worker Count SELECT max_workers_count FROM sys.dm_os_sys_info Let us run the above query on my system and find the results. As my system is 32 bit and I have two CPU, the Max Worker Count is displayed as 512. To address the previous discussion, adding more CPU does not necessarily double the Worker Count. In fact, the logic behind this simple principle is as follows: For x86 (32-bit) upto 4 logical processors  max worker threads = 256 For x86 (32-bit) more than 4 logical processors  max worker threads = 256 + ((# Procs – 4) * 8) For x64 (64-bit) upto 4 logical processors  max worker threads = 512 For x64 (64-bit) more than 4 logical processors  max worker threads = 512+ ((# Procs – 4) * 8) In addition to this, you can configure the Max Worker Thread by using SSMS. Go to Server Node >> Right Click and Select Property >> Select Process and modify setting under Worker Threads. According to Book On Line, the default Worker Thread settings are appropriate for most of the systems. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL System Table, SQL Tips and Tricks, T SQL, Technology Tagged: SQL DMV

    Read the article

  • IASA South East Florida Chapter Meeting Recap - June 2011

    - by Sam Abraham
    Erik Russell and Giles Marino were our speakers for the June 2011 IASA South East Florida Chapter meeting.    Attendees filled all available seats at the Microsoft office conference room where the event was held. This highlights the high interest in Enterprise Architecture as a career track and chartered project role. Also in attendance were our Board of Directors and Alex Funkhouser, President, Sherlock Technology.   Rainer Habermann, Chapter President, kicked off the meeting by introducing our speakers and Board of Directors.   Alex Funkhouser, President of South Florida’s staffing firm Sherlock Technology spoke briefly about available Software Architect positions in the area. Alex also congratulated and presented this week’s Sherlock Raffle winner with $500 in cash.   Our speakers Giles and Erik then proceeded with their talk. Erik presented a business case in the government sector where Enterprise Architecture helped a government entity cut costs and streamline its various business operations. Technologies leveraged in Erik’s demonstrated project were Java-based.   Giles then followed with a thorough demonstration of the Architecture patterns he used to migrate a complete backend system for an insurance company to the .Net Platform.   Audience was very engaged with our speakers as evidenced by the large number of follow-up questions asked at the end of the talk.   We greatly enjoyed Giles and Erik’s talk and look forward to having them share with us more of their adventures as Enterprise Architects in the near future.   Below are some photos of the event.   Sam Abraham Secretary- IASA South East Florida Chapter. http://www.iasaglobal.org/iasa/South_East_Florida.asp Chapter President - Rainer Habermann kicks off our meeting.   Sherlock Technology President Alex Funkhouser holding Sherlock's weekly cash prize. Alex shares available Software Architect opportunities with our members Erik Russell addressing our membership Giles Marino sharing his architecture experience in the insurance industry In this photo: Dave Noderer, Rainer Habermann, Quent Herschelman and Alex Funkhouser. Event attracted a large audience and filled the Microsoft conference room where it was held

    Read the article

  • Professional Scrum Developer (.NET) Training in London

    - by Martin Hinshelwood
    On the 26th - 30th July in Microsoft’s offices in London Adam Cogan from SSW will be presenting the first Professional Scrum Developer course in the UK. I will be teaching this course along side Adam and it is a fantastic experience. You are split into teams and go head-to-head to deliver units of potentially shippable work in four two hour sprints. The Professional Scrum Developer course is the only course endorsed by both Microsoft and Ken Schwaber and they have worked together very effectively in brining this course to fruition. This course is the brain child of Richard Hundhausen, a Microsoft Regional Director, and both Adam and I attending the Trainer Prep in Sydney when he was there earlier this year. He is a fantastic trainer and no matter where you do this course you can be safe in the knowledge that he has trained and vetted all of the teachers. A tools version of Ken if you will Find a course and register Download this syllabus Download the Scrum Guide What is the Professional Scrum Developer course all about? Professional Scrum Developer course is a unique and intensive five-day experience for software developers. The course guides teams on how to turn product requirements into potentially shippable increments of software using the Scrum framework, Visual Studio 2010, and modern software engineering practices. Attendees will work in self-organizing, self-managing teams using a common instance of Team Foundation Server 2010. Who should attend this course? This course is suitable for any member of a software development team – architect, programmer, database developer, tester, etc. Entire teams are encouraged to attend and experience the course together, but individuals are welcome too. Attendees will self-organize to form cross-functional Scrum teams. These teams require an aggregate of skills specific to the selected case study. Please see the last page of this document for specific details. Product Owners, ScrumMasters, and other stakeholders are welcome too, but keep in mind that everyone who attends will be expected to commit to work and pull their weight on a Scrum team. What should you know by the end of the course? Scrum will be experienced through a combination of lecture, demonstration, discussion, and hands-on exercises. Attendees will learn how to do Scrum correctly while being coached and critiqued by the instructor, in the following topic areas: Form effective teams Explore and understand legacy “Brownfield” architecture Define quality attributes, acceptance criteria, and “done” Create automated builds How to handle software hotfixes Verify that bugs are identified and eliminated Plan releases and sprints Estimate product backlog items Create and manage a sprint backlog Hold an effective sprint review Improve your process by using retrospectives Use emergent architecture to avoid technical debt Use Test Driven Development as a design tool Setup and leverage continuous integration Use Test Impact Analysis to decrease testing times Manage SQL Server development in an Agile way Use .NET and T-SQL refactoring effectively Build, deploy, and test SQL Server databases Create and manage test plans and cases Create, run, record, and play back manual tests Setup a branching strategy and branch code Write more maintainable code Identify and eliminate people and process dysfunctions Inspect and improve your team’s software development process What does the week look like? This course is a mix of lecture, demonstration, group discussion, simulation, and hands-on software development. The bulk of the course will be spent working as a team on a case study application delivering increments of new functionality in mini-sprints. Here is the week at a glance: Monday morning and most of the day Friday will be spent with the computers powered off, so you can focus on sharpening your game of Scrum and avoiding the common pitfalls when implementing it. The Sprints Timeboxing is a critical concept in Scrum as well as in this course. We expect each team and student to understand and obey all of the timeboxes. The timebox duration will always be clearly displayed during each activity. Expect the instructor to enforce it. Each of the ½ day sprints will roughly follow this schedule: Component Description Minutes Instruction Presentation and demonstration of new and relevant tools & practices 60 Sprint planning meeting Product owner presents backlog; each team commits to delivering functionality 10 Sprint planning meeting Each team determines how to build the functionality 10 The Sprint The team self-organizes and self-manages to complete their tasks 120 Sprint Review meeting Each team will present their increment of functionality to the other teams = 30 Sprint Retrospective A group retrospective meeting will be held to inspect and adapt 10 Each team is expected to self-organize and manage their own work during the sprint. Pairing is highly encouraged. The instructor/product owner will be available if there are questions or impediments, but will be hands-off by default. You should be prepared to communicate and work with your team members in order to achieve your sprint goal. If you have development-related questions or get stuck, your partner or team should be your first level of support. Module 1: INTRODUCTION This module provides a chance for the attendees to get to know the instructors as well as each other. The Professional Scrum Developer program, as well as the day by day agenda, will be explained. Finally, the Scrum team will be selected and assembled so that the forming, storming, norming, and performing can begin. Trainer and student introductions Professional Scrum Developer program Agenda Logistics Team formation Retrospective Module 2: SCRUMDAMENTALS This module provides a level-setting understanding of the Scrum framework including the roles, timeboxes, and artifacts. The team will then experience Scrum firsthand by simulating a multi-day sprint of product development, including planning, review, and retrospective meetings. Scrum overview Scrum roles Scrum timeboxes (ceremonies) Scrum artifacts Simulation Retrospective It’s required that you read Ken Schwaber’s Scrum Guide in preparation for this module and course. MODULE 3: IMPLEMENTING SCRUM IN VISUAL STUDIO 2010 This module demonstrates how to implement Scrum in Visual Studio 2010 using a Scrum process template*. The team will learn the mapping between the Scrum concepts and how they are implemented in the tool. After connecting to the shared Team Foundation Server, the team members will then return to the simulation – this time using Visual Studio to manage their product development. Mapping Scrum to Visual Studio 2010 User Story work items Task work items Bug work items Demonstration Simulation Retrospective Module 4: THE CASE STUDY In this module the team is introduced to their problem domain for the week. A kickoff meeting by the Product Owner (the instructor) will set the stage for the why and what that will take during the upcoming sprints. The team will then define the quality attributes of the project and their definition of “done.” The legacy application code will be downloaded, built, and explored, so that any bugs can be discovered and reported. Introduction to the case study Download the source code, build, and explore the application Define the quality attributes for the project Define “done” How to file effective bugs in Visual Studio 2010 Retrospective Module 5: HOTFIX This module drops the team directly into a Brownfield (legacy) experience by forcing them to analyze the existing application’s architecture and code in order to locate and fix the Product Owner’s high-priority bug(s). The team will learn best practices around finding, testing, fixing, validating, and closing a bug. How to use Architecture Explorer to visualize and explore Create a unit test to validate the existence of a bug Find and fix the bug Validate and close the bug Retrospective Module 6: PLANNING This short module introduces the team to release and sprint planning within Visual Studio 2010. The team will define and capture their goals as well as other important planning information. Release vs. Sprint planning Release planning and the Product Backlog Product Backlog prioritization Acceptance criteria and tests Sprint planning and the Sprint Backlog Creating and linking Sprint tasks Retrospective At this point the team will have the knowledge of Scrum, Visual Studio 2010, and the case study application to begin developing increments of potentially shippable functionality that meet their definition of done. Module 7: EMERGENT ARCHITECTURE This module introduces the architectural practices and tools a team can use to develop a valid design on which to develop new functionality. The teams will learn how Scrum supports good architecture and design practices. After the discussion, the teams will be presented with the product owner’s prioritized backlog so that they may select and commit to the functionality they can deliver in this sprint. Architecture and Scrum Emergent architecture Principles, patterns, and practices Visual Studio 2010 modeling tools UML and layer diagrams SPRINT 1 Retrospective Module 8: TEST DRIVEN DEVELOPMENT This module introduces Test Driven Development as a design tool and how to implement it using Visual Studio 2010. To maximize productivity and quality, a Scrum team should setup Continuous Integration to regularly build every team member’s code changes and run regression tests. Refactoring will also be defined and demonstrated in combination with Visual Studio’s Test Impact Analysis to efficiently re-run just those tests which were impacted by refactoring. Continuous integration Team Foundation Build Test Driven Development (TDD) Refactoring Test Impact Analysis SPRINT 2 Retrospective Module 9: AGILE DATABASE DEVELOPMENT This module lets the SQL Server database developers in on a little secret – they can be agile too. By using the database projects in Visual Studio 2010, the database developers can join the rest of the team. The students will see how to apply Agile database techniques within Visual Studio to support the SQL Server 2005/2008/2008R2 development lifecycle. Agile database development Visual Studio database projects Importing schema and scripts Building and deploying Generating data Unit testing SPRINT 3 Retrospective Module 10: SHIP IT Teams need to know that just because they like the functionality doesn’t mean the Product Owner will. This module revisits acceptance criteria as it pertains to acceptance testing. By refining acceptance criteria into manual test steps, team members can execute the tests, recording the results and reporting bugs in a number of ways. Manual tests will be defined and executed using the Microsoft Test Manager tool. As the Sprint completes and an increment of functionality is delivered, the team will also learn why and when they should create a branch of the codeline. Acceptance criteria Testing in Visual Studio 2010 Microsoft Test Manager Writing and running manual tests Branching SPRINT 4 Retrospective Module 11: OVERCOMING DYSFUNCTION This module introduces the many types of people, process, and tool dysfunctions that teams face in the real world. Many dysfunctions and scenarios will be identified, along with ideas and discussion for how a team might mitigate them. This module will enable you and your team to move toward independence and improve your game of Scrum when you depart class. Scrum-butts and flaccid Scrum Best practices working as a team Team challenges ScrumMaster challenges Product Owner challenges Stakeholder challenges Course Retrospective What will be expected of you and you team? This is a unique course in that it’s technically-focused, team-based, and employs timeboxes. It demands that the members of the teams self-organize and self-manage their own work to collaboratively develop increments of software. All attendees must commit to: Pay attention to all lectures and demonstrations Participate in team and group discussions Work collaboratively with other team members Obey the timebox for each activity Commit to work and do your best to deliver All teams should have these skills: Understanding of Scrum Familiarity with Visual Studio 201 C#, .NET 4.0 & ASP.NET 4.0 experience*  SQL Server 2008 development experience Software testing experience * Check with the instructor ahead of time for the exact technologies Self-organising teams Another unique attribute of this course is that it’s a technical training class being delivered to teams of developers, not pairs, and not individuals. Ideally, your actual software development team will attend the training to ensure that all necessary skills are covered. However, if you wish to attend an open enrolment course alone or with just a couple of colleagues, realize that you may be placed on a team with other attendees. The instructor will do his or her best to ensure that each team is cross-functional to tackle the case study, but there are no guarantees. You may be required to try a new role, learn a new skill, or pair with somebody unfamiliar to you. This is just good Scrum! Who should NOT take this course? Because of the nature of this course, as explained above, certain types of people should probably not attend this course: Students requiring command and control style instruction – there are no prescriptive/step-by-step (think traditional Microsoft Learning) labs in this course Students who are unwilling to work within a timebox Students who are unwilling to work collaboratively on a team Students who don’t have any skill in any of the software development disciplines Students who are unable to commit fully to their team – not only will this diminish the student’s learning experience, but it will also impact their team’s learning experience Find a course and register Download this syllabus Download the Scrum Guide Technorati Tags: Scrum,SSW,Pro Scrum Dev

    Read the article

  • Podcast Show Notes: Fear and Loathing in SOA

    - by Bob Rhubart
    The latest program (#47) in the Arch2Arch podcast series is the first of three segments from another virtual mini-meet-up with architects from the OTN community, recorded on March 9, 2010. In keeping with the meet-up format, I sent an invitation to my list of past participants in Arch2Arch panel discussions. The following people showed up to take seats at the virtual table and drive the conversation: Hajo Normann is a SOA architect and consultant at EDS in Frankfurt Blog | LinkedIn | Oracle Mix | Oracle ACE Profile | Books  Jeff Davies is a Senior Product Manager at Oracle, and is the primary author of The Definitive Guide to SOA: Oracle Service Bus Homepage | Blog | LinkedIn | Oracle Mix Pat Shepherd is an enterprise architect with the Oracle Enterprise Solutions Group. Oracle Mix | LinkedIn | Blog This first segment focuses on a discussion of the persistent fear of SOA the panelists have observed among many developers and architects. Listen to Part 1 The discussion continues in next week’s segment with a look at the misinformation and misunderstanding behind the fear of SOA, and a discussion of possible solutions. So stay tuned: RSS   del.icio.us Tags: oracle,otn,arch2arch,podcast,soa,service-oriented architecture,enterprise architecture Technorati Tags: oracle,otn,arch2arch,podcast,soa,service-oriented architecture,enterprise architecture

    Read the article

  • ArchBeat Link-o-Rama for 2012-03-16

    - by Bob Rhubart
    Applications Architecture | Roy Hunter and Brian Rasmussen www.oracle.com Roy Hunter and Brian Rasmussen examine the strategies three organizations applied to modernize their application architectures. Part of the Oracle Experiences in Enterprise Architecture article series. Public Sector Architecture | Jeremy Foreman and Hamza Jahangir www.oracle.com Jeremy Foreman and Hamza Jahangir examine the strategies used by two different organizations in deploying their respective future-state architectures. Part of the Oracle Experiences in Enterprise Architecture article series. XMLA vs BAPI | Sunil S. Ranka sranka.wordpress.com Oracle ACE Sunil Ranka's brief primer on the XMLA and BAPI standards. The Java EE 6 Example - Running Galleria on WebLogic 12 - Part 3 | Markus Eisele blog.eisele.net Oracle ACE Director Markus Eisele continues his series on working with Galleria. Oracle Linux Online Forum - March 27 event.on24.com Date: Tuesday, March 27, 2012 Time: 9:30 AM PT / 12:30 PM ET Hosts: Oracle Executives Edward Screven and Wim Coekaerts. Customer Presentation: How Oracle Helps Reduce Cost and Improve Performance of Database Applications at Progressive Insurance Speaker: John Dome What's New in Oracle Linux Speakers: Waseem Daher, Chris Mason, Elena Zannoni, Lenz Grimmer Get More Value from your Linux Vendor Speakers: Sergio Leunissen, Chris Mason, Monica Kumar JavaOne 2012 Call for Papers www.oracle.com Don't keep all that Java skill locked up in your overstuffed cranium. Submit your proposal for that killer paper now to share your experience at this year’s JavaOne. Running applications in the cloud are not designed for the cloud | Tom Laszewski blogs.oracle.com "The issue you face with moving client/server applications to the cloud via rehosting is 'where will the applications run?'" says Tom Laszewski. GlassFish 3.1.2 - Which Platform(s)? | The Aquarium blogs.oracle.com The Aquarium shares a list of GlassFish 3.1.2-supported operating systems and JVMs. IT Strategies from Oracle; Three Recipes for Oracle Service Bus 11g ; Stir Up Some SOA www.oracle.com Featured this week on the OTN Architect Portal, along with the latest events, product downloads, community social resources, articles on hot topics, and a whole lot more. Thought for the Day "No matter what the problem is, it's always a people problem." — Gerald M. Weinberg

    Read the article

  • links for 2011-02-28

    - by Bob Rhubart
    Apache Tuscany : SCA Java 2.x Releases (tags: ping.fm) Richard Veryard on Architecture: Modernism and Enterprise Architecture "Underlying conventional enterprise architecture theory and practice are some implicit assumptions that could be loosely characterized as modernist. Several people are offering more or less radical departures from conventional enterprise architecture..." - Richard Veryard (tags: ping.fm entarch) Java / Oracle SOA blog: Building an asynchronous web service with OSB "A few weeks ago I made a blogpost over how you can build an asynchronous web service with JAX-WS. In this blogpost I will do the same in the Oracle Service Bus." - Oracle ACE Edwin Biemond (tags: oracle otn oracleace servicebus esb osb webservices soa) Enterprise Software Development with Java: GlassFish 3.1 arrived! Yes sir, we do cluster now! "GlassFish 3.1 is finally there. As promised by Oracle back in March last year! And it is an exciting release. It brings back all the clustering and high availability support we were missing since 2.x into the Java EE 6 world." - Oracle ACE Director Markus Eisele (tags: oracle otn oracleace glassfish)

    Read the article

  • links for 2010-06-17

    - by Bob Rhubart
    Live Webcast: Alcatel-Lucent Delivers Modern Customer User Experience with New Interactive Portal Saeed Hosseiniyar (CIO of Alcatel-Lucent’s Enterprise Products Group) and Andy MacMillan  (VP of Product Management for Oracle’s Enterprise 2.0 Solutions) discuss how  Alcatel used Oracle’s Enterprise 2.0 solutions to build a community and  give customers a rich interactive experience. (tags: oracle otn webcast enterprise2.0) Up Next, More Browser Tools for WebCenter Sharing | The AppsLab On the heels of our bookmarklet for sharing to WebCenter, today we were designing another other way to help people interact with WebCenter from the browser (tags: ping.fm oracle e20) BPM 11gR1 now available on Amazon EC2 "This is a fully configured image which requires absolutely no installation and lets you get hands on experience with the software within minutes," says  Prasen Palvankar. "This image has all the required software installed and configured." (tags: oracle otn bpm amazon ec2) Webcast: Introducing Next-Generation Business Process Management Hasan Rizvi, Senior Vice President, Oracle Product Development, discusses innovations in Oracle's new BPM Suite 11g in this webcast. (tags: oracle otn webcast bpm) Tim Pinchetti: Architecture as a navigation system "Metaphors have value in communicating different aspects of architecture. So I’d like to explore different perspectives on architecture using different metaphors, starting with: navigation!" -- Tim Pinchetti  (tags: architecture enterprisearchitecture entarch) Oracle Fusion Middleware Innovation Awards 2010 Nominate your organization today for a chance to be recognized for your cutting-edge solution using Oracle Fusion Middleware products. (tags: oracle openworld fusionmiddleware innovation) Oracle OpenWorld Key Financials Sessions Theresa Hickman with highlights on the some of the 70 financial sessions scheduled for Oracle Open World,  crossing all the financials product lines: e-Business Suite, JD Edwards, PeopleSoft, and Fusion. (tags: oracle otn openworld financials) Liberate Your Laptops! The Return of Virtual Developer Day Details on the upcoming Oracle Technology Network Virtual Developer Day - Tuxedo. (English-language version scheduled for July 27th.)  (tags: oracle tuxedo virtualbox otn) Webcast: Effective Smart Data Grid Management David Haak (Accenture), Brad Williams (Oracle), and Chris Foretich (Southern) discuss the strategy behind and the application of smart data grid technology in this on-demand webcast.  (tags: ping.fm oracle bpm)

    Read the article

  • links for 2010-03-18

    - by Bob Rhubart
    Oracle Database HA Architecture « The Oracle Instructor Oracle Certified Master Uwe Hesse introduces his blog's new Oracle Database HA Architecture page. (tags: oracle otn highavailability database) Mario Morgado: Where is the value of Enterprise Architecture? "When we purchase a product, its value is equivalent to the maximum amount that someone is willing to pay for the product. However, is the same equation valid in terms of the business value of enterprise architecture?" Mario Morgado (tags: otn oracle enterprisearchitecture) Steve Wilson: Managing Application to Disk "Of course, what we're introducing today goes beyond a mere re-skinning of Sun Ops Center. The promise is to offer real integration, and now we're delivering on the first phase in that roadmap by introducing the Oracle Management Connector for Ops Center. This software allows customers to connect an instance of Ops Center to an instance of Oracle Enterprise Manager's grid control server and connect the event streams of the two products, allowing for new levels of visibility into the customer's systems when using the combination of Oracle and Sun technology." "Virtual" Steve Wilson (tags: oraclesun opscenter)

    Read the article

  • Partner Webcast: Implementing on SOA - A Hands-On Technology Demonstration

    - by Thanos
    Service Oriented Architecture enables organizations to operate more efficiently and react faster to opportunities. How? By helping you create a flexible application architecture that supports greater business agility. You decide how quickly you want to move. You can start by implementing an application integration platform. Then, you can evolve your environment gradually by introducing business process management, business rules, governance and event processing. This unified but flexible approach also allows you to maximize the long-term cost reduction benefits of SOA and cloud-based applications. In this session, you dive into SOA Suite and you will see the usage of some advanced features. The topics covered range from adapters, automatic and custom business process correlation through service routing, rule based and manual decisions and to error handling, compensations and extending SOA Suite with your own Java code. Agenda: Service Oriented Architecture The Auctions Scenario Live Demo of the Oracle SOA Suite Features Connecting to non service enabled technologies with adapters (Database and File adapter) Orchestrating services with BPEL processes Correlating processes with correlation sets Mediating services Service Component Architecture Event Handling User Notification Human Workflow Business Rules Fault Handling patterns Developing custom components with Spring and using them in SOA Suite composites Delivery Format This FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24hours prior to start time may not receive confirmation to attend. Duration: 1 hour Register Now For all your questions and support requests to adopt and implement the latest Oracle technologies please contact us at [email protected]

    Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >