Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 131/215 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• Force Windows 8 Metro apps to run lower resolutions below 1024x768?

  - by piokuc

  I have installed Windows 8 Consumer Preview on my Samsung NB30 netbook. I was very excited to try it on this little box cause it has a touchscreen and Windows 8 is supposed to be optimized for touchscreen devices. The installation was quick and smooth and all the drivers seem to work well including the one for the touchscreen. There is one major problem, though: when I try to tap one of the tiles on the Metro UI it displays This app can't open. The screen resolution is too low for this app to run. The machine has Intel Atom N450 processor and Intel GMA 3159 integrated graphics card and has maximum resolution 1024x600. I've read that Metro requires at least 1024x768. Is there a solution to this problem? Is there a way to force Windows 8 Metro apps to run in lower resolutions?

  Read the article

• WD Elements Desktop External - Not recognised on a single computer

  - by Aelexe

  My WD Elements Desktop External is no longer recognised on my main computer. It has worked fine in the past, but now all of a sudden is not detected. It does not prompt when plugged in, nor does it show up in the disc management interface or the device manager. It appears to be aware that it is plugged in however as the light on the external blinks rapidly for a short while after being plugged in. The strangest thing however is that it works fine on other computers, including my family computers and my laptop. I have attempted to troubleshoot the issue by trying various USB devices in multiple ports on each system to see if there is any correlation with the issue, but have come up with nothing that gives me an idea of what is going on. I have also attempted to format the external using my laptop, but that has not helped either. If anyone has had a similar issue, or knows of any potential solutions, please post your advice. Thanks for your time.

  Read the article

• Linux foxboard network monitor

  - by het.oosten

  I want to use a Foxboard a simple network monitor for multiple routers (all routers are connected to the internet). Foxboard is a mini pc with an embedded version of Debian. My idea is to use multiple virtual network devices like this: eth0 192.168.2.10 eth0:1 192.168.3.10 eth0:2 192.168.4.10 I found a nice Python script to ping an external host here (the solution from Ryan Cox): http://stackoverflow.com/questions/316866/ping-a-site-in-python Is it possible to configure Debian to use eth0 when I ping www.site-a.com and eth0:1 when I ping www.site-b.com?

  Read the article

• (Windows 7) Dial Up Connection Locks up the Networking Service

  - by Nick

  I connect to the internet by using my cell phone as a dial up modem. (shh, don't tell my service provider) The connection is usually seamless and the speed is good (150kbps) but occasionally, the connection will get terminated by either the phone or the network, I'm not sure which and then Windows7 stubbornly doesn't acknowledge that the connection is dead so I can re-dial. I have tried to manually kill the connection, but then anything related to the network service refuses to open and the connection is still there. No "Network and Sharing Center", "Network Devices" and often the tray menu will refuse to pop open. The only way I have found to clear the problem is a full restart which. Logging off doesn't work and I haven't been able to find the service that is frozen. If anyone knows how to fix this or prevent this from happening or even how to go about troubleshooting I would be very grateful. ps. This problem is non-existant when tethering in linux on the same machine. (Ubunutu 9 and JoliOS)

  Read the article

• Windows 7 Desktop as Bluetooth Mixer

  - by J.R. Lillard

  I would like to stream all the audio from my Droid X2 to my desktop running Windows 7 via bluetooth. When I pair the two devices I can make this work but the audio plays through the internal speakers. I am actually wanting to listen to everything through a pair of bluetooth headphones. The end result would be that I could listen to music from my phone but easily pause it to listen to audio from the desktop instead. So far I have not had any luck. I thought about connecting the line out to the line in so I could monitor the line in from my headphones. My current setup is wiring the phone to the line in and then monitoring the line in through the headphones. I'm just wanting to eliminate the wire and go wireless the whole way. Is there something in Windows that prevents it from taking an inbound audio stream and sending it out another device?

  Read the article

• Can a consumer wireless router act as both a wireless client and access point?

  - by glibdud

  I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

  Read the article

• Ubuntu Linux -- create custom burnable/bootable DVD image?

  - by ashgromnies

  I recently developed some kiosk software that runs on Ubuntu Linux, and my client needs me to set up ten more computers with the complete software package(and that number will only grow in the future). So I'm looking for a way to make this less of a pain in the neck and prevent me from shooting myself in the foot -- I had to disable some things on the installations of the operating systems like screensavers, automatic updates, etc. that would pop up and disrupt the kiosk operation. I don't feel comfortable doing that by hand across 10 computers, it seems stupid. Does anybody have recommendations for software that would let me burn an installable DVD with a complete image of the hard drive from one of the devices? I've looked at Clonezilla, G4L, and PartImage and I'm still not quite sure if any of them offer what I need. I know PartImage for sure won't work, because it doesn't support Ext4.

  Read the article

• Live Mesh beta on Windows 7 - Did anybody get it working?

  - by Andrew J. Brehm

  I have Live Mesh beta installed on 64 bit Windows 7 but cannot connect to the computer remotely. The "Manage devices" page gives this information: This device is synchronizing but cannot be remotely accessed. Check the Live Mesh notifier on the device to see if Live Mesh remote desktop enhancements need to be installed. However, I cannot find instructions on how to use the "notifier" to "see" if Live Mesh remote desktop enhancements are installed or how I could install them. When I originally installed (both times) Mesh I did tell it to install "remote desktop enhancements". Does this just not work with Windows 7 and/or 64 bit?

  Read the article

• VM: Windows 7 host, Linux guest, VT-d?

  - by chx

  I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

  Read the article

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• linux installation cd enviroment

  - by haw3d

  i recently make a custom linux system, for my special need. its on my HDD, but i want to create a cd for installation. multiple day ego, i found a livecd and create install script for that, but in power failure my HDD is gone, and i cant found that live cd again. my install script is based on recoverin tar.gz backup. my requorement is: based on glibc (not uclibc) recognize every devices have you any suggestion? excuse me for my bad english.

  Read the article

• Do TCP/UDP connections add to the Windows incoming connection limit?

  - by user47899

  Hi all, I've tried to figure out what Microsoft means by "Windows sockets" and it all seems very vague. Basically we have customers that sometimes try to set up workgroups with close to 10 Windows XP computers with drive and printer shares and we're worried that some of the non-Windows Ethernet devices on the network will cause issues with the inbound connection limit outlined here where only 10 inbound connections can be active at one time. For example, there is an Ethernet Caller ID device that broadcasts UDP packets to all computers, and a kitchen display system that likewise broadcasts UDP. They may also have incoming TCP packets for our custom online ordering module. Do these TCP/UDP connections count toward the inbound connection limit? I'm aware that Windows 7 has increased the limit to 20 but we might have future customers that will push that limit. Thanks in advance

  Read the article

• My Router is fast when i reset it but slows down seconds later

  - by hglocke

  I have a Belkin N wireless router which until recently worked perfectly fine. Now i have to reset the router every few minutes, otherwise it slows down to a crawl. What can I do? I have tried turning the routers firewall off, but it does not make any difference. As far as I'm aware there have been no recent firmware updates. EDIT: The other devices on my network (laptop and iphone) do not have this problem. I connect to the router using a TP-Link wireless network card and I have already tried uninstalling and installing the driver. Hopefully this will narrow down the problem significantly.

  Read the article

• Setting up VMWare ESXi 5 with a single physical NIC

  - by deed02392

  I have a cheap but powerful dedicated server I am leasing with OVH, because they were recently having a promotion. I would like to try and manage all this power by playing with VMs using ESXi. However I am only provided with a single NIC. I had thought this would be easy to get around since, at home I have a single NIC which is my broadband modem, and yet a simple NAT gateway device happily provides internet access to all my devices. I am struggling to implement this on ESXi, though. Can anyone advise on how I could go about having ESXi and multiple VMs working with just one NIC? Here's my current setup: I believe all I need is to be able to configure NAT from the NIC to all the VMs etc.. How would I set up and administer this kind of infrastructure?

  Read the article

• USB Dongle detected but connect option greyed out

  - by GrimSweeper48

  Hey I have just converted one of our physical license servers into a VMware server. It uses a USB key for a license doggle (WIBU-Key) for some software we have. Now it detects that the USB is plugged in on VMware Server (shows up as Wibu-box) under devices. But when I click on it all the options are greyed out including the connect and as such the VM can't read it? The VM is running Windows Server 2003. Anyone have any ideas? Ive attached an image so you can see clearer.

  Read the article

• Spare PC with XP to be used as Torrent Downloader and local Web Server HOWTO?

  - by gslide

  Hi I'm a bit in a pickle in trying to setup my old laptop using Windows XP to be able to serve as two devices in one, I want to make it a downloader for torrents and a local web server as well and how to do this? I have a wireless NIC and LAN, and I have two internet connections and i would like to be able to download torrent only on LAN and be a webserver on the Wireless, also the webserver can be accessed through the internet. The reason for trying to separate the connection is I can't have torrent downloads using all my bandwidth as my web pages cant be access as it times out or too slow. I have two broadband connections, is this even possible or would i need a different OS or program that I can download? please

  Read the article

• Printer demands specific USB port

  - by snitzr

  My HP laptop has 3 USB ports. When I add my printer driver by plugging into one of those ports, the driver installs fine. Problem: I have to install 3 identical drivers. One for each USB port. Depending on what USB port I have the printer plugged into, I have to pick the driver for that port. Question: How do I print to any of the three ports automatically based on what port the printer is in? Further into: In Devices and Printers Printer Properties Ports... I cannot select more than one port for a printer driver to print to.

  Read the article

• Unable to format/add a partition to Windows XP

  - by sma

  I recently add a 1T disk to an XP machine. I found the disk in the "disk management", I click "initialize" to init it, then creates a primary partition with size 950G, then select quick format to format the disk, the "disk management" will then complains: The disk configuration operation did not complete. Check the system event log for more information on the error. Verify the status of your storage devices before retrying. If that does not solve the problem, close the disk management console, then restart disk management or restart the computer. What could be the reason?

  Read the article

• Sennheiser PC360 Microphone Suddenly Stopped Working

  - by Michaelwm

  Just recently, my Sennheiser PC360's microphone stopped working. Yesterday Night, it was working 100% fine. Muting correctly, un-muting, volume boosting, etc. I woke up this morning, and got into a skype call (After not changing a single setting on my computer), and it wasn't working. I tried mumble, and it didn't work there either. After that, I checked my sound devices and found out it was plugged in, but not responding to my voice. I unplugged the headset, and it correctly showed that it was unplugged. So, a quick run-down: Sennheiser PC360 Headset suddenly stops working after a few hours of sleep. Software is up to date I can hear the mute sound when I raise and lower the microphone arm Windows Sound Device Manager shows that it is plugged in Unplugging the headset correctly shows it is unplugged Windows Sound Device Manager shows that the microphone isn't receiving any input

  Read the article

• How can I use target mode in Linux with USB?

  - by dash17291

  Kernel 3.5 introduces: This release includes a driver for using an IEEE-1394 connection as a SCSI transport. This enables to expose SCSI devices to other nodes on the Firewire bus, for example hard disk drives. It's a similar functionality to Firewire Target Disk Mode on many Apple computers. This release also adds a usb-gadget driver that does the same with USB. The driver supports two USB protocols are supported that is BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is advertised on alternative interface 0 (primary) and UAS is on alternative interface 1. Both protocols can work on USB 2.0 and USB 3.0. UAS utilizes the USB 3.0 feature called streams support. http://kernelnewbies.org/Linux_3.5 I have an Arch Linux with kernel 3.5.3-1 and wanna try out this feature.

  Read the article

• macports apache,php,db, how do I test on another device?

  - by brokenindexfinger

  My supervisor suggests using macports to install/manage different versions of apache and php, as well as both mysql and posgres databases. The idea is that we need to test our platform on different versions of each. So far I've just been using the default apache installation on osx lion, and the default postgres installation. My question is this: once I turn Web Sharing off, and proceed with a custom apache2 setup based in /opt/local/, how do I broadcast my machine's IP to other devices, for testing? With Web Sharing, I can get my machine's IP and use that to test with an iPad and iPhone. Will that still be the case, and if so, how do I do it?

  Read the article

• Can't access to a iSCSI volume

  - by jmiguel.rodriguez

  I have a iSCSI target on a customer place I'm using from an old Fedora (Core6) server. I configured it and formatted as ext3 (mistake, now I know) and I've been working with it for some time. Now I need to access this volume from other machine. As far as I've read, I can't do it safely from two machines at the same time (yep, that's the first thing I tried). So I've umount it from original server and tried to mount it on the new server (I did it at first with Ubuntu 10 LTS but when I was unable to do it I installed another Fedora with the same configuration) with no success. The problem: I can see all target on NAS but when I do a "fdisk -l" to see all devices and know which mount I see all targets as SFS filesystem. From the original server I see all SFS (after all, they belong to my customer and don't know what he have in) except the one I manage which I see as 'Linux'. What can I do? Thank you in advanced, regards, jmiguel

  Read the article

• Redirecting output to email

  - by Alpha

  I am aware that in Windows you can use the following snippet to redirect the output of a command line tool to the clipboard: mytool | clip Also, it can be done with files: clip < myFile.txt I also know Windows has several other devices you can use as output / input for these redirections (probably the printer is the most famous of them). However, is there something to send the text to the default email program? I would love to find that there is something like: mytool | email. Is there something alike?

  Read the article

• Is there a Google Authenticator desktop client?

  - by cwd

  I am using Google Authenticator for 2-step authentication. I like how I can use a code and verify my account using my phone: I realize that the app was designed to run on a device other than a computer to increase security for the computer (in case that it is lost or stolen), but I would like to know if there is a way I can run Google Authenticator on my Macbook. Now, per the Google Authenticator Page it will not run on a desktop: What devices does Google Authenticator work on? Android version 2.1 or later BlackBerry OS 4.5 - 6.0 iPhone iOS 3.1.3 or later However there are several emulators for developers and so I wonder if it is possible to run one of these emulators and then run Google Authenticator with that. I do realize this is not a best practice - but I'm less worried about my laptop getting stolen and more worried about someone just hacking the account. So my question is this: Is it possible to run it on the desktop, even though it is not meant to be / not recommended?

  Read the article

• Would a switch be covered by a router's firewall

  - by Uh-yeah...

  So... Hopefully; this is the right place for this question. I need more Ethernet ports on my home network. Sadly, we already have an old router connected to the main router and we still need more ports. I feel dumb for asking; but, I just would like to double check. Would the devices connected to the switch be "protected" by the Main router's firewall? ? Up to this point I have assumed that was the case; but, a co-worker is convinced that is not the case [ I believe he is thinking of a situation in which the switch (un-managed) is before an access point]. [It would go modem to main router; main router then has the switch and old router connected to it.

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >