Search Results

Search found 12648 results on 506 pages for 'disk activity'.

Page 131/506 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

• It could be worse....

  - by Darryl Gove

  As "guest" pointed out, in my file I/O test I didn't open the file with O_SYNC, so in fact the time was spent in OS code rather than in disk I/O. It's a straightforward change to add O_SYNC to the open() call, but it's also useful to reduce the iteration count - since the cost per write is much higher: ... #define SIZE 1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT|O_SYNC,S_IWGRP|S_IWOTH|S_IWUSR); ... Running this gave the following results: Time per iteration 0.000065606310 MB/s Time per iteration 2.709711563906 MB/s Time per iteration 0.178590114758 MB/s Yup, disk I/O is way slower than the original I/O calls. However, it's not a very fair comparison since disks get written in large blocks of data and we're deliberately sending a single byte. A fairer result would be to look at the I/O operations per second; which is about 65 - pretty much what I'd expect for this system. It's also interesting to examine at the profiles for the two cases. When the write() was trapping into the OS the profile indicated that all the time was being spent in system. When the data was being written to disk, the time got attributed to sleep. This gives us an indication how to interpret profiles from apps doing I/O. It's the sleep time that indicates disk activity.

  Read the article

• Install on Acer Aspire 4752

  - by user216962

  I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

• Dual Boot menu with Ubuntu and Windows 8 not showing up

  - by user180630

  I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• ubuntu 12.04 installer does not recognize drive partitions

  - by endless forms

  I recently purchased a new HP Pavilion HPE desktop running Windows 7. I am trying to install a dual-boot system with 12.04. However, when I run the LiveCD I only get as far as the "Install" window where you can select the partitions for your drives. On the bottom where it says "device for boot loader installation" I have "/dev/sda" and cannot select any other devices. All the options to change the drives are greyed out, most likely because there are no drives in the window. I partitioned my largest drive using the tools within Windows, then booted into the CD, but nothing shows up. I then used Gparted to change the new space from unallocated to an /ext2, and still nothing shows up. The installer does not recognize anything, but when I go into an Ubuntu session and use the disk utility manager I can see the partitions I made. Anything I do has to be done outside of the installer. I have no files on this new computer, so this is the perfect time to install a parallel OS. I would like avoid completely reinstalling Windows, however. I've been over the forums many times, but all the answers I've found have not worked for me. I also tried flagging the new, empty partition as boot, but that screwed Windows up. Also, the WUBI installer hits the same point and quits. I know that the disk itself is fine because I just made another dual boot system on a Gateway PC. This makes me think something within this computer is preventing the installer from "seeing" the drives. Any help would be much appreciated! Edit in response: The main part of the partitioning window shows no partitions, everything is blank. There is no way to add partitions, and all the buttons are useless. I've tried defragging my drive multiple times, and I also used the same disk to dual-boot another PC with no problems, so it's not the disk, it's definitely the computer.

  Read the article

• Drive reporting incorrect free space

  - by Oli

  So I swapped my shiny SATA SSD for an even shinier PCI-E SSD. I run my core OS on the SSD because it's silly-fast. I did this on my old SSD so I created a new EXT4 partition and then just dded the data across (sorry I don't know the exact command I ran anymore) and after reinstalling grub, I booted onto the PCI-E SSD. At first glance everything had worked perfectly and things were running faster than ever. But then I noticed the free disk space on the new, larger drive: it was almost exactly the same as it was on the other disk... A disk that was half its size. So it looks as if I've copied the files across incorrectly and it's copied some of the filesystem metadata along with it. Tools like du and Disk Usage Analyzer come back with the correct figures. Things that look at the partition (and not the files) seem to think the drive is 120GB I've been using this drive for a week now so it's way out of sync with the old SSD so dumping the data and starting again isn't a job that fills me with joy but two questions: Is there a way to fix my filesystem so it knows what it's really on about? fsck e2fsck and badblocks all seem to be able to scan it without finding a problem with it. If I do plug my old SSD back in, copy the data off my PCI-E on to it and then copy it back onto a fresh filesystem (eg juggle the data around), what's the best way of doing that? I obviously want to keep all the permissions and softlinks where they are.

  Read the article

• My new hard drive won't automount on boot

  - by user518

  I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

  Read the article

• ubuntu boots only with usb

  - by klimat

  Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• Mounting a new hard drive (sda1) to my existing filesystem

  - by shank22

  I tried to read some posts regarding mounting a new hard drive, but I am facing some problem. My new hard drive is sda1. The output of sudo fdisk -l is: sudo fdisk -l Disk /dev/sdb: 999.7 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders, total 1952448512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00016485 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 1935822847 967910400 83 Linux /dev/sdb2 1935824894 1952446463 8310785 5 Extended /dev/sdb5 1935824896 1952446463 8310784 82 Linux swap / Solaris Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x78dbcdc1 Device Boot Start End Blocks Id System /dev/sda1 2048 1953521663 976759808 7 HPFS/NTFS/exFAT What should be done to add this new sda1 hard drive on booting up? What should be added in the /etc/fstab file? I have not performed any partition on the new sda1 drive. I need help on how to proceed from scratch and can't afford to take any risk. Please help!

  Read the article

• ??OSW (OSWatcher Black Box) ????

  - by Feng

     OSWatcher Black Box, ??OSW,?oracle???????????????,?????OS??????????OS??????????,??CPU/Memory/Swap/Network IO/Disk IO?????? +++ ????????OSW? OSW?????????,????????????????,???mrtg, cacti, sar, nmon, enterprise manger grid control. ????OSW?????: 1. ???????,???????2. ???????,????CPU,???????????3. ???????,????????????????????????OS? ???????OS???,??OS?????,?????????????;??????????????????????,???????. ???????,????????:?????????,??????????,????????????(root cause),?????????????????????????,OSW??????,??????: 1. ??????????OS??????????????????????????OSW??,?????????OS??,??????DB/???? 2. ??ORACLE Database Performance???,?????????????OS??????OS?????????????Swapping,???????????????,?????????,???AWR?????????latch/mutex?????? 3. ??????????????AWR??????????,top5??????????;?CPU,??,Swap, Disk IO?????????????OSW??????????,????????????????????????OSW???,??????????????? 4. ?????ORA-04030?????CJQ0, P00X, J00X?????????,???????OSW,???????????????????OS????????? 5. ????server process??hung?,??????OSW????????????????suspend???,?????????CPU/Memory? 6. ??Listener hung???,?????OSW??????????????? 7. Login Storm??:????????????,????,????ASH,AWR????????????????OSW?ps?????,??????, oracle ?server process????????? ???,OSW????????????????????OS?????????????,??????DBA???OSW??????????????OSW,????DB Performance????,????????OSW???? +++ ?????OSW??????: 1. ??????????????,???????,???????? 2. OSW???????? OSW??????????????OS???????,??ps, vmstat, netstat, mpstat, top;????????????????? ?????????CPU, Disk IO, Disk Space, Memory;???????????????,??????????????????????????,??OSW????????:?????????,CPU????90%??;???free space???????????????????????????,??OSW????????? +++ ????????UNIX/LINUX???/??OSW: 1. ???301137.1???OSW 2. ????????(/tmp??),??????????root?? $ tar xvf osw.tar 3. ?? $ nohup ./startOSWbb.sh 60 48 gzip & ????????,??OSW,????60???????,???????48?????(??????????),???????gzip?????? 4. ????? $ ./stopOSWbb.sh ?????????archive???? ????????????????????OSW???????,???????

  Read the article

• How to Reduce the Size of Your WinSXS Folder on Windows 7 or 8

  - by Chris Hoffman

  The WinSXS folder at C:\Windows\WinSXS is massive and continues to grow the longer you have Windows installed. This folder builds up unnecessary files over time, such as old versions of system components. This folder also contains files for uninstalled, disabled Windows components. Even if you don’t have a Windows component installed, it will be present in your WinSXS folder, taking up space. Why the WinSXS Folder Gets to Big The WinSXS folder contains all Windows system components. In fact, component files elsewhere in Windows are just links to files contained in the WinSXS folder. The WinSXS folder contains every operating system file. When Windows installs updates, it drops the new Windows component in the WinSXS folder and keeps the old component in the WinSXS folder. This means that every Windows Update you install increases the size of your WinSXS folder. This allows you to uninstall operating system updates from the Control Panel, which can be useful in the case of a buggy update — but it’s a feature that’s rarely used. Windows 7 dealt with this by including a feature that allows Windows to clean up old Windows update files after you install a new Windows service pack. The idea was that the system could be cleaned up regularly along with service packs. However, Windows 7 only saw one service pack — Service Pack 1 — released in 2010. Microsoft has no intention of launching another. This means that, for more than three years, Windows update uninstallation files have been building up on Windows 7 systems and couldn’t be easily removed. Clean Up Update Files To fix this problem, Microsoft recently backported a feature from Windows 8 to Windows 7. They did this without much fanfare — it was rolled out in a typical minor operating system update, the kind that don’t generally add new features. To clean up such update files, open the Disk Cleanup wizard (tap the Windows key, type “disk cleanup” into the Start menu, and press Enter). Click the Clean up System Files button, enable the Windows Update Cleanup option and click OK. If you’ve been using your Windows 7 system for a few years, you’ll likely be able to free several gigabytes of space. The next time you reboot after doing this, Windows will take a few minutes to clean up system files before you can log in and use your desktop. If you don’t see this feature in the Disk Cleanup window, you’re likely behind on your updates — install the latest updates from Windows Update. Windows 8 and 8.1 include built-in features that do this automatically. In fact, there’s a StartComponentCleanup scheduled task included with Windows that will automatically run in the background, cleaning up components 30 days after you’ve installed them. This 30-day period gives you time to uninstall an update if it causes problems. If you’d like to manually clean up updates, you can also use the Windows Update Cleanup option in the Disk Usage window, just as you can on Windows 7. (To open it, tap the Windows key, type “disk cleanup” to perform a search, and click the “Free up disk space by removing unnecessary files” shortcut that appears.) Windows 8.1 gives you more options, allowing you to forcibly remove all previous versions of uninstalled components, even ones that haven’t been around for more than 30 days. These commands must be run in an elevated Command Prompt — in other words, start the Command Prompt window as Administrator. For example, the following command will uninstall all previous versions of components without the scheduled task’s 30-day grace period: DISM.exe /online /Cleanup-Image /StartComponentCleanup The following command will remove files needed for uninstallation of service packs. You won’t be able to uninstall any currently installed service packs after running this command: DISM.exe /online /Cleanup-Image /SPSuperseded The following command will remove all old versions of every component. You won’t be able to uninstall any currently installed service packs or updates after this completes: DISM.exe /online /Cleanup-Image /StartComponentCleanup /ResetBase Remove Features on Demand Modern versions of Windows allow you to enable or disable Windows features on demand. You’ll find a list of these features in the Windows Features window you can access from the Control Panel. Even features you don’t have installed — that is, the features you see unchecked in this window — are stored on your hard drive in your WinSXS folder. If you choose to install them, they’ll be made available from your WinSXS folder. This means you won’t have to download anything or provide Windows installation media to install these features. However, these features take up space. While this shouldn’t matter on typical computers, users with extremely low amounts of storage or Windows server administrators who want to slim their Windows installs down to the smallest possible set of system files may want to get these files off their hard drives. For this reason, Windows 8 added a new option that allows you to remove these uninstalled components from the WinSXS folder entirely, freeing up space. If you choose to install the removed components later, Windows will prompt you to download the component files from Microsoft. To do this, open a Command Prompt window as Administrator. Use the following command to see the features available to you: DISM.exe /Online /English /Get-Features /Format:Table You’ll see a table of feature names and their states. To remove a feature from your system, you’d use the following command, replacing NAME with the name of the feature you want to remove. You can get the feature name you need from the table above. DISM.exe /Online /Disable-Feature /featurename:NAME /Remove If you run the /GetFeatures command again, you’ll now see that the feature has a status of “Disabled with Payload Removed” instead of just “Disabled.” That’s how you know it’s not taking up space on your computer’s hard drive. If you’re trying to slim down a Windows system as much as possible, be sure to check out our lists of ways to free up disk space on Windows and reduce the space used by system files.     

  Read the article

• Customize Team Build 2010 – Part 13: Get control over the Build Output

  In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application     In the part 8, I have explained how you can add informational messages, warnings or errors to the build output. If you want to integrate with other lines of text to the build output, you need to do more. This post will show you how you can add extra steps, additional information and hyperlinks to the build output. Add an hyperlink to the end of the build output Lets start with a simple example of how you can adjust the build output. In this case we are going to add at the end of the build output an hyperlink where a user can click on to for example start the deployment to the test environment. In part 4 you can find information how you can create a custom activity To add information to the build output, you need the BuildDetail. This value is a variable in your xaml and is thus easily transferable to you custom activity. Besides the BuildDetail the user has also to specify the text and the url that has to be added to the end of the build output. The following code segment shows you how you can achieve this.     [BuildActivity(HostEnvironmentOption.All)]    public sealed class AddHyperlinkToBuildOutput : CodeActivity    {        [RequiredArgument]        public InArgument<IBuildDetail> BuildDetail { get; set; }         [RequiredArgument]        public InArgument<string> DisplayText { get; set; }         [RequiredArgument]        public InArgument<string> Url { get; set; }         protected override void Execute(CodeActivityContext context)        {            // Obtain the runtime value of the input arguments                        IBuildDetail buildDetail = context.GetValue(this.BuildDetail);            string displayText = context.GetValue(this.DisplayText);            string url = context.GetValue(this.Url);             // Add the hyperlink            buildDetail.Information.AddExternalLink(displayText, new Uri(url));            buildDetail.Information.Save();        }    } If you add this activity to somewhere in your build process template (within the scope Run on Agent), you will get the following build output Add an line of text to the build output The next challenge is to add this kind of output not only to the end of the build output but at the step that is currently executing. To be able to do this, you need the current node in the build output. The following code shows you how you can achieve this. First you need to get the current activity tracking, which you can get with the following line of code             IActivityTracking currentTracking = context.GetExtension<IBuildLoggingExtension>().GetActivityTracking(context); Then you can create a new node and set its type to Activity Tracking Node (so copy it from the current node) and do nice things with the node.             IBuildInformationNode childNode = currentTracking.Node.Children.CreateNode();            childNode.Type = currentTracking.Node.Type;            childNode.Fields.Add("DisplayText", "This text is displayed."); You can also add a build step to display progress             IBuildStep buildStep = childNode.Children.AddBuildStep("Custom Build Step", "This is my custom build step");            buildStep.FinishTime = DateTime.Now.AddSeconds(10);            buildStep.Status = BuildStepStatus.Succeeded; Or you can add an hyperlink to the node             childNode.Children.AddExternalLink("My link", new Uri(http://www.ewaldhofman.nl)); When you combine this together you get the following result in the build output     You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

  Read the article

• Android in-game pause screen

  - by Max

  Right now Im calling a new activity with an xml-view when I pause my game, but Since I do this I need to use context in my real-time code, and this is causing a memory leak. Is there any preffered way to pause the game? By pause I mean if game is over, if I die, or if I press pause-button. Would a custom dialog work just aswell? this would mean I wont have to leave my main-activity while im in-game.

  Read the article

• No root file system is defined error after installation

  - by LearnCode

  I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

  Read the article

• How can I audit users and access attempts to SSH on my server?

  - by RadiantHex

  I've had a few security problems with a server of mine, a few SSH users have been setting up fires aka giving problems. I would like to: Track user logins and logouts Track activity of these SSH, in order to discover any malicious activity Prevent users from deleting logs I am not much of a sys admin and I am quite inexperienced in this matter, so any kind of advice would be very welcome and very helpful. :)

  Read the article

• 10 tape technology features that make you go hmm.

  - by Karoly Vegh

  A week ago an Oracle/StorageTek Tape Specialist, Christian Vanden Balck, visited Vienna, and agreed to visit customers to do techtalks and update them about the technology boom going around tape. I had the privilege to attend some of his sessions and noted the information and features that took the customers by surprise and made them think. Allow me to share the top 10: I. StorageTek as a brand: StorageTek is one of he strongest names in the Tape field. The brand itself was valued so much by customers that even after Sun Microsystems acquiring StorageTek and the Oracle acquiring Sun the brand lives on with all the Oracle tapelibraries are officially branded StorageTek.See http://www.oracle.com/us/products/servers-storage/storage/tape-storage/overview/index.html II. Disk information density limitations: Disk technology struggles with information density. You haven't seen the disk sizes exploding lately, have you? That's partly because there are physical limits on a disk platter. The size is given, the number of platters is limited, they just can't grow, and are running out of physical area to write to. Now, in a T10000C tape cartridge we have over 1000m long tape. There you go, you have got your physical space and don't need to stuff all that data crammed together. You can write in a reliable pattern, and have space to grow too. III. Oracle has a market share of 62% worldwide in recording head manufacturing. That's right. If you are running LTO drives, with a good chance you rely on StorageTek production. That's two out of three LTO recording heads produced worldwide.  IV. You can store 1 Exabyte data in a single tape library. Yes, an Exabyte. That is 1000 Petabytes. Or, a million Terabytes. A thousand million GigaBytes. You can store that in a stacked StorageTek SL8500 tapelibrary. In one SL8500 you can put 10.000 T10000C cartridges, that store 10TB data (compressed). You can stack 10 of these SL8500s together. Boom. 1000.000 TB.(n.b.: stacking means interconnecting the libraries. Yes, cartridges are moved between the stacked libraries automatically.)  V. EMC: 'Tape doesn't suck after all. We moved on.': Do you remember the infamous 'Tape sucks, move on' Datadomain slogan? Of course they had to put it that way, having only had disk products. But here's a fun fact: on the EMCWorld 2012 there was a major presence of a Tape-tech company - EMC, in a sudden burst of sanity is embracing tape again. VI. The miraculous T10000C: Oracle StorageTek has developed an enterprise-grade tapedrive and cartridge, the T10000C. With awesome numbers: The Cartridge: Native 5TB capacity, 10TB with compression Over a kilometer long tape within the cartridge. And it's locked when unmounted, no rattling of your data.  Replaced the metalparticles datalayer with BaFe (bariumferrite) - metalparticles lose around 7% of magnetism within 30 days. BaFe does not. Yes we employ solid-state physicists doing R&D on demagnetisation in our labs. Can be partitioned, storage tiering within the cartridge!  The Drive: 2GB Cache Encryption implemented in HW - no performance hit 252 MB/s native sustained data rate, beats disk technology by far. Not to mention peak throughput.  Leading the tape while never touching the data side of it, protecting your data physically too Data integritiy checking (CRC recalculation) on tape within the drive without having to read it back to the server reordering data from tape-order, delivering it back in application-order  writing 32 tracks at once, reading them back for CRC check at once VII. You only use 20% of your data on a regular basis. The rest 80% is just lying around for years. On continuously spinning disks. Doubly consuming energy (power+cooling), blocking diskstorage capacity. There is a solution called SAM (Storage Archive Manager) that provides you a filesystem unifying disk and tape, moving data on-demand and for clients transparently between the different storage tiers. You can share these filesystems with NFS or CIFS for clients, and enjoy the low TCO of tape. Tapes don't spin. They sit quietly in their slots, storing 10TB data, using no energy, producing no heat, automounted when a client accesses their data.See: http://www.oracle.com/us/products/servers-storage/storage/storage-software/storage-archive-manager/overview/index.html VIII. HW supported for three decades: Did you know that the original PowderHorn library was released in '87 and has been only discontinued in 2010? That is over two decades of supported operation. Tape libraries are - just like the data carrying on tapecartridges - built for longevity. Oh, and the T10000C cartridge has 30-year archival life for long-term retention.  IX. Tape is easy to manage: Have you heard of Tape Storage Analytics? It is a central graphical tool to summarize, monitor, analyze dataflow, health and performance of drives and libraries, see: http://www.oracle.com/us/products/servers-storage/storage/tape-storage/tape-analytics/overview/index.html X. The next generation: The T10000B drives were able to reuse the T10000A cartridges and write on them even more data. On the same cartridges. We call this investment protection, and this is very important for Oracle for the future too. We usually support two generations of cartridges together. The current drive is a T10000C. (...I know I promised to enlist 10, but I got still two more I really want to mention. Allow me to work around the problem: ) X++. The TallBots, the robots moving around the cartridges in the StorageTek library from tapeslots to the drives are cableless. Cables, belts, chains running to moving parts in a library cause maintenance downtimes. So StorageTek eliminated them. The TallBots get power, commands, even firmwareupgrades through the rails they are running on. Also, the TallBots don't just hook'n'pull the tapes out of their slots, they actually grip'n'lift them out. No friction, no scratches, no zillion little plastic particles floating around in the library, in the drives, on your data. (X++)++: Tape beats SSDs and Disks. In terms of throughput (252 MB/s), in terms of TCO: disks cause around 290x more power and cooling, in terms of capacity: 10TB on a single media and soon more.  So... do you need to store large amounts of data? Are you legally bound to archive it for dozens of years? Would you benefit from automatic storage tiering? Have you got large mediachunks to be streamed at times? Have you got power and cooling issues in the growing datacenters? Do you find EMC's 180° turn of tape attitude interesting, but appreciate it at the same time? With all that, you aren't alone. The most data on this planet is stored on tape. Tape is coming. Big time.

  Read the article

• APress Deal of the Day 22/Dec/2010 - Pro BAM in BizTalk Server 2009

  - by TATWORTH

  Another $10 bargain from Apress available to 08:00 UTC on Dec/23 Pro BAM in BizTalk Server 2009 Business Activity Monitoring, or BAM, provides real-time business intelligence by capturing data as it flows through a business system. By using BAM, you can monitor a business process in real time and generate alerts when the process needs human intervention. Pro Business Activity Monitoring in BizTalk 2009 focuses on Microsoft's BAM tools, which provide a flexible infrastructure that captures data from Windows Communication Foundation, Windows Workflow Foundation, .NET applications, and BizTalk Server. $49.99 | Published Jul 2009 | Jeff Sanders

  Read the article

• Real tortoises keep it slow and steady. How about the backups?

  - by Maria Zakourdaev

    … Four tortoises were playing in the backyard when they decided they needed hibiscus flower snacks. They pooled their money and sent the smallest tortoise out to fetch the snacks. Two days passed and there was no sign of the tortoise. "You know, she is taking a lot of time", said one of the tortoises. A little voice from just out side the fence said, "If you are going to talk that way about me I won't go." Is it too much to request from the quite expensive 3rd party backup tool to be a way faster than the SQL server native backup? Or at least save a respectable amount of storage by producing a really smaller backup files?  By saying “really smaller”, I mean at least getting a file in half size. After Googling the internet in an attempt to understand what other “sql people” are using for database backups, I see that most people are using one of three tools which are the main players in SQL backup area:  LiteSpeed by Quest SQL Backup by Red Gate SQL Safe by Idera The feedbacks about those tools are truly emotional and happy. However, while reading the forums and blogs I have wondered, is it possible that many are accustomed to using the above tools since SQL 2000 and 2005.  This can easily be understood due to the fact that a 300GB database backup for instance, using regular a SQL 2005 backup statement would have run for about 3 hours and have produced ~150GB file (depending on the content, of course).  Then you take a 3rd party tool which performs the same backup in 30 minutes resulting in a 30GB file leaving you speechless, you run to management persuading them to buy it due to the fact that it is definitely worth the price. In addition to the increased speed and disk space savings you would also get backup file encryption and virtual restore -  features that are still missing from the SQL server. But in case you, as well as me, don’t need these additional features and only want a tool that performs a full backup MUCH faster AND produces a far smaller backup file (like the gain you observed back in SQL 2005 days) you will be quite disappointed. SQL Server backup compression feature has totally changed the market picture. Medium size database. Take a look at the table below, check out how my SQL server 2008 R2 compares to other tools when backing up a 300GB database. It appears that when talking about the backup speed, SQL 2008 R2 compresses and performs backup in similar overall times as all three other tools. 3rd party tools maximum compression level takes twice longer. Backup file gain is not that impressive, except the highest compression levels but the price that you pay is very high cpu load and much longer time. Only SQL Safe by Idera was quite fast with it’s maximum compression level but most of the run time have used 95% cpu on the server. Note that I have used two types of destination storage, SATA 11 disks and FC 53 disks and, obviously, on faster storage have got my backup ready in half time. Looking at the above results, should we spend money, bother with another layer of complexity and software middle-man for the medium sized databases? I’m definitely not going to do so.  Very large database As a next phase of this benchmark, I have moved to a 6 terabyte database which was actually my main backup target. Note, how multiple files usage enables the SQL Server backup operation to use parallel I/O and remarkably increases it’s speed, especially when the backup device is heavily striped. SQL Server supports a maximum of 64 backup devices for a single backup operation but the most speed is gained when using one file per CPU, in the case above 8 files for a 2 Quad CPU server. The impact of additional files is minimal.  However, SQLsafe doesn’t show any speed improvement between 4 files and 8 files. Of course, with such huge databases every half percent of the compression transforms into the noticeable numbers. Saving almost 470GB of space may turn the backup tool into quite valuable purchase. Still, the backup speed and high CPU are the variables that should be taken into the consideration. As for us, the backup speed is more critical than the storage and we cannot allow a production server to sustain 95% cpu for such a long time. Bottomline, 3rd party backup tool developers, we are waiting for some breakthrough release. There are a few unanswered questions, like the restore speed comparison between different tools and the impact of multiple backup files on restore operation. Stay tuned for the next benchmarks.    Benchmark server: SQL Server 2008 R2 sp1 2 Quad CPU Database location: NetApp FC 15K Aggregate 53 discs Backup statements: No matter how good that UI is, we need to run the backup tasks from inside of SQL Server Agent to make sure they are covered by our monitoring systems. I have used extended stored procedures (command line execution also is an option, I haven’t noticed any impact on the backup performance). SQL backup LiteSpeed SQL Backup SQL safe backup database <DBNAME> to disk= '\\<networkpath>\par1.bak' , disk= '\\<networkpath>\par2.bak', disk= '\\<networkpath>\par3.bak' with format, compression EXECUTE master.dbo.xp_backup_database @database = N'<DBName>', @backupname= N'<DBName> full backup', @desc = N'Test', @compressionlevel=8, @filename= N'\\<networkpath>\par1.bak', @filename= N'\\<networkpath>\par2.bak', @filename= N'\\<networkpath>\par3.bak', @init = 1 EXECUTE master.dbo.sqlbackup '-SQL "BACKUP DATABASE <DBNAME> TO DISK= ''\\<networkpath>\par1.sqb'', DISK= ''\\<networkpath>\par2.sqb'', DISK= ''\\<networkpath>\par3.sqb'' WITH DISKRETRYINTERVAL = 30, DISKRETRYCOUNT = 10, COMPRESSION = 4, INIT"' EXECUTE master.dbo.xp_ss_backup @database = 'UCMSDB', @filename = '\\<networkpath>\par1.bak', @backuptype = 'Full', @compressionlevel = 4, @backupfile = '\\<networkpath>\par2.bak', @backupfile = '\\<networkpath>\par3.bak' If you still insist on using 3rd party tools for the backups in your production environment with maximum compression level, you will definitely need to consider limiting cpu usage which will increase the backup operation time even more: RedGate : use THREADPRIORITY option ( values 0 – 6 ) LiteSpeed : use  @throttle ( percentage, like 70%) SQL safe :  the only thing I have found was @Threads option.   Yours, Maria

  Read the article

• Google Analytics on Android

  - by pjv

  There is a specific and official analytics SDK for native Android apps (note that I'm not talking about webpages in apps on a phone). This library basically sends pages and events to Google Analytics and you can view your analytics in exactly the same dashboard as for websites. Since my background is apps rather than websites, and since a lot of the Google Analytics terminology seems particularly inapplicable to a native app, I need some pointers. Please discuss my remarks, provide some clarification where you think I'm off-track, and above all share good experiences! 1. Page Views Pages mostly can match different Activities (and Dialogs) being displayed. Activities can be visible behind non-full-screen Activities however, though only the top-level Activity can be interacted. This sort-off clashes with a "(page) view". You'd also want at least one page view for each visit and therefore put one page view tracker in the Application class. However this does not constitute a window or sorts. Usually an Activity will open at the same time, so the time spent on that page will have been 0. This will influence your "time spent" statistics. How are these counted anyway? Moreover, there is a loose coupling between the Activities, by means of Intents. A user can, much like on any website, step in at any Activity, although usually this then concerns resuming the application where he left off. This makes that the hierarchy of Activities usually is very flat. And since there are no url's involved. What meaning would using slashes in page titles have, such as "/Home"? All pages would appear on an equal level in the reports, so no content drilldown. Non-unique page views seem to be counted as some kind of indicator of successfulness: how often does the visitor revisit the page. When the user rotates the screen however usually an Activity resumes again, thus making it a new page view. This happens a lot. Maybe a well-thought-through placement of the call might solve this, or placing several, I'm not sure. How to deal with Page Views? 2. Events I'd say there are two sorts: A user event Something that happened, usually as an indirect consequence of the above. The latter particularly is giving me headaches. First of all, many events aren't written in code any more, but pieced logically together by means of Intents. This means that there is no place to put the analytics call. You'd either have to give up this advantage and start doing it the old-fashioned way in favor of good analytics, or, just be missing some events. Secondly, as a developer you're not so much interested in when a user clicks a button, but if the action that should have been performed really was performed and what the result was. There seems to be no clear way to get resulting data into Google Analytics (what's up with the integers? I want to put in Strings!). The same that applies to the flat pages hierarchy, also goes for the event categories. You could do "vertical" categories (topically, that is), but some code is shared "horizontally" and the tracking will be equally shared. Just as with the Intents mechanism, inheritance makes it hard for you to put the tracking in the right places at all times. And I can't really imagine "horizontal" categories. Unless you start making really small categories, such as all the items form the same menu in one category, I have a hard time grasping the concept. Finally, how do you deal with cancelling? Usually you both have an explicit cancel mechanism by ways of a button, as well as the implicit cancel when the "back"-button is pressed to leave the activity and there were no changes. The latter also applies to "saves", when the back button is pressed and there ARE changes. How are you consequently going to catch all these if not by doing all the "back"-button work yourself? How to deal with events? 3. Goals For goal types I have choice of: URL Destination, Time on Site, and Pages/Visit. Most apps don't have a funnel that leads the user to some "registration done" or "order placed" page. Apps have either already been bought (in which case you want to stimulate the user to love your app, so that he might bring on new buyers) or are paid for by in-app ads. So URL Destination is not a very important goal. Time on Site also seems troublesome. First, I have some doubt on how this would be measured. Second, I don't necessarily want my user to spend a lot of time in my already paid app, just be active and content. Equivalently, why not mention how frequent a user uses your app? Regarding Pages/Visit I already mentioned how screen orientation changes blow up the page view numbers. In an app I'd be most interested in events/visit to measure the user's involvement/activity. If he's intensively using the app then he must be loving it right? Furthermore, I also have some small funnels (that do not lead to conversion though) that I want to see streamlined. In my mind those funnels would end in events rather than page views but that seems not to be possible. I could also measure clickthroughs on in-app ads, but then I'd need to track those as Page Views rather than Events, in view of "URL Destination". What are smart goals for apps and how can you fit them on top of Analytics? 4. Optimisation Is there a smart way to manually do what "Website Optimiser" does for websites? Most importantly, how would I track different landing page designs? 5. Traffic Sources Referrals deal with installation time referrals, if you're smart enough to get them included. But perhaps I'd also want to get some data which third-party app sends users to my app to perform some actions (this app interoperability is possible via Intents). Many of the terminologies related to "Traffic Sources" seem totally meaningless and there is no possibility of connecting in AdSense. What are smart uses of this data? 6. Visitors Of the "Browser capabilities", "Network Properties" and "Mobile" tabs, many things are pointless as they have no influence on / relation with my mostly offline app that won't use flash anyway. Only if you drill down far enough, can you get to OS versions, which do matter a lot. I even forgot where you could check what exact Android devices visited. What are smart uses of this data? How can you make the relevant info more prominent? 7. Other No in-page analytics. I have to register my app as a web-url (What!?)?

  Read the article

• Marmalade SDK views navigation concepts

  - by Mina Samy

  I want to develop a simple multi-Activity Android game using Marmalade SDK. I looked at the SDK samples and found that most of them are a single view (Android Activity) apps. The Navigation model in Android is a stack-like model where views are pushed and popped. I can't find whether Marmalade has a similar model or it uses a different approach. would you please explain this to me and provide tutorials and samples to navigation in Marmalade if possible ? Thanks

  Read the article

• Attempted to dual boot with Windows and now can only run Ubuntu

  - by Zeusoflightning125

  Very recently, I decided to attempt to dual boot Ubuntu with my already installed windows 8. Everything worked perfectly, I manually set up disk partitions (this is all on 1 hard drive), and it loaded up Ubuntu fine. HOWEVER, now when I try to load up my computer it only has 2 options in the boot menu and both just load up Windows (both were something related to hard disk). I also can only boot from legacy hard disk things. (I already only was able to aside from my USB that I installed Windows from) The Windows files are still accessible from Ubuntu, but I cannot just load Windows. There is no option to. I also don't have the 2 buttons for each operating system I was expecting. I can only select the thing to load from BIOS. So, my question is, how do I load the Windows partition on my hard drive? I'm sorry if I'm a bit clueless I am just new to both Linux and dual-booting.

  Read the article

• How do I recover a BTRFS filesystem with "parent transid verify failed" errors?

  - by Evan P.

  I've got an external USB disk running btrfs. I use it for backups, and each time I do a backup I take a snapshot. However, it's giving me this error now: parent transid verify failed on 109973766144 wanted 1823 found 1821 parent transid verify failed on 109973766144 wanted 1823 found 1821 Obviously, this is a non-critical disk, but I have a few files on here that aren't available elsewhere. Is there any way to recover data from this disk? Maybe by mounting one of the snapshots as root?

  Read the article

• Does seeding torrents affect the harddisk RAM caching?

  - by satuon

  I've downloaded a lot of torrent files and while I'm seeding them, I've noticed that very often when I start the browser it's slow and the hard disk activity indicator is on. Usually when I start a program it gets cached in RAM and starting it again is very quick, and I have 3 GB of RAM so usually it stays cached nearly forever. But when my torrent client is seeding it seems that after an hour programs that I ran are no longer cached in RAM. I was thinking maybe it's because of the disk reads which the torrent client performs are cached and fill up RAM eventually. But I don't think they need to be, as they are read only once and are unlikely to be read again soon. So my questions are - is this the way I think, and if so is it possible in principle to prevent the disk reads from being cached? I can try to edit the source code of the program.

  Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >