Search Results

Search found 3740 results on 150 pages for 'academic research'.

Page 132/150 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Where to find new Micro-BTX (uBTX) motherboards? Or should I just replace the box?

  - by John Rudy

  OK, so I'm guessing that it's dead. It's not my machine, and the owner is on a very fixed (IE, none) income. I'm generous, but I'm not that generous, since I already gave him what (at the time) was a fully functional and fairly well-equipped machine. (Aside from the mobo and proc, almost nothing else in it was stock. I'd taken it up to 3GB of RAM, upgraded the hard drive, added a decent video card, installed a wireless adapter, running Vista, etc.) According to further research, the machine uses a Micro-BTX (uBTX) motherboard, and since it's an AMD Athlon64, the AM2 socket. So I'm looking at a few options, and am wondering what's the best route to take? Find an AM2 socket uBTX mobo. I can't find them new online anywhere, leading me to believe that this is an obsolete form factor/chip combination. I don't want a refurb or a system pull because, quite honestly, once I deal with this mess, I don't want to go through it again in another year or two. Find an Intel uBTX mobo and a (relatively -- hah, I still want at least a dual-core) inexpensive Intel CPU. At this point, the only things stock in the machine would be the case and the PSU. :) Buy a bare-bones kit (mobo/proc/PSU/case, sometimes even RAM) from somewhere like CompUSA/TigerDirect or Fry's and move all of the other hardware over. This makes life difficult because the copy of Vista is an upgrade, tied to the copy of XP which shipped on the Gateway, which is OEM and won't install on the new box. :) If I change the CPU brand (AMD to Intel), will I need to reinstall Windows, or can it just be reactivated? Where can I actually find a new, in-box, not system pull, not refurb AM2 uBTX mobo? Do they even exist anymore? What kind of money are we talking (US dollars)? The end goal is to get the machine functional again as cheaply as humanly possible. If it were my own machine, I wouldn't even be asking this, I'd be custom-building a new one. However, it's not mine, I'm shelling out of pocket for the fix (plus the work), and thus want to keep that end price low-low-low.

  Read the article

• Looking for definitive answer to accessing a network drive/NAS/SMB drive via Windows 7 HOME and Windows 7 Professional. Is it possible and how?

  - by Rob

  I want to be able to access my Lacie 2Big network drive in Windows 7 Explorer. I have a machine with Windows 7 Home and one with Windows 7 Professional. Neither Windows 7, home or pro, can access the drive. The Windows 7 Home machine displays the drive in its Explorer, with the capacity, but on clicking the icon, I get another window, blank with the busy pointer which does not eventually stop. The drive is working perfectly. How do I know this? Because I can access it with no problems on my Apple Mac, Windows XP home and Ubuntu machines on the same network as the Windows 7 machines. Except for the Windows XP home machine that required Lacie ethernet agent program, the Mac and the Ubuntu machines needed no setup, the drive appeared like any other drive. So my 2 questions: Is it possible to access a network share drive, e.g. a NAS like Lacie 2big in Windows 7 Home Premium and Windows 7 Professional. If so how? I read on Microsoft's own forums and elsewhere that network sharing drives, e.g. via SambaSMB is NOT possible on Windows 7 Home. Is this true? http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/thread/e08c3500-a722-4b44-b644-64f94f63c8e5/ This question is a more comprehensive re-write of my earlier question: Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac. ...where I haven't received a solving answer, and I have tried to find a solution myself. Lacie themselves haven't offered a definitive solving answer either, but I suspect it's not just their drives but SMB/network share/NAS in general... This is utterly pathetic that Windows 7 home cannot access something as simple as a network drive, especially given that Windows XP home can. My research so far: Apparently it is possible on Windows 7 Professional, via the Local Security Policy, only on Windows 7 Professional, not Windows 7 Home: http://www.sevenforums.com/tutorials/7357-local-security-policy-editor-open.html http://answers.microsoft.com/en-us/windows/forum/windows_7-security/accessing-local-security-policy-in-windows-7-home/0c8300d0-1d23-4de0-9b37-935c01a7d17a http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/14fc5037-3386-4973-b5d8-2167272ff5ad/ http://www.tomshardware.com/forum/75-63-windows-samba-issue Another solution offered is editing the registry, doesn't look promising to me, fiddly and not guaranteed, hard to produce a complete solution I think, given that everyone's registry can vary. Registry key edit solutons: https://www.lacie.com/uk/mystuff/ticket/ticket.htm?tid=101278940 http://networksecurity.farzadbanifatemi.com/security-policy/how-to-access-local-security-policy-windows-7-home-premium Related: Does Windows 7 Home Premium support backing up to a network share Network Copy to Windows 7 File Share Fails and Kills Network Connection

  Read the article

• Setup MSSQL replication with peer to peer topology: problem setting up Conflict Detection

  - by Roel

  Hi, I'm setting up a SQL Replication strategy, using MSSQL2008 with peer-to-peer publications (2 servers, each one subscribes to the other). I followed this HOWTO from MSDN, and the setup seems to be working fine: add a record to one table on server A, query on server B shows the new record. So far, so good. So far I only have one table 'Templates': Id PK (calculated field) NodeId int default 1/2 (Server A = 1, Server B = 2) LocalId int autoid Name nvarchar(100) Now, I would like to enable 'Conflict detection', which should be enabled by default. But every time I try to save the 'Conflict Detection' feature in the Publication Properties I get the following error: Cannot save Peer conflict detection properties. An exception occurred while executing a Transact-SQL statement or batch.(Microsoft.SqlServer.ConnectionInfo) Program Location: at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand) at Microsoft.SqlServer.Replication.ReplicationObject.ExecCommand(String commandIn) at Microsoft.SqlServer.Replication.TransPublication.SetPeerConflictDetection(Boolean enablePeerConflictDetection, Int32 peerOriginatorID) at Microsoft.SqlServer.Management.UI.PubPropSubscriptionOptions.SaveP2PConflictDetection() at Microsoft.SqlServer.Management.UI.PubPropSubscriptionOptions.SaveProperties(ExecutionMode& executionResult) Column name 'Id' does not exist in the target table or view. Changed database context to 'TestDB'. (.Net SqlClient Data Provider) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.00.2531&EvtSrc=MSSQLServer&EvtID=1911&LinkId=20476 Server Name: SERVER_A Error Number: 1911 Severity: 16 State: 1 Line Number: 2 Program Location: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) Now, I googled the hell out of this error, and nothing shows up. I also can't seem to find out what the exact target table of the error "Column name 'Id' does not exist..." is. Has anyone every done this successfully? Am I missing something? Having this setup without conflict detection feels pretty useless... EDIT OK, so after some more research and setting up with different databases etc, I found out that the calculated 'Id' column of the Templates table is the culprit. I don't know why, but the replication doesn't seem to allow calculated columns (which are also primary key). It works now too, without the 'Id' column, and using the NodeId and LocalId as a combined PK. So now the question is, why isn't it allowed to have a calculated column as PK for replication with conflict detection?

  Read the article

• Uninstalling MySQL for MariaDB Replacement on cPanel

  - by ImmortalFirefly

  Well the first part of my day was spent researching how to remove MySQL to install MariaDB and the second part of my day was spent trying to reinstall MySQL cause something was messed up. So now I come to the masses for some help. I have a box with cPanel/WHM on it. CentOS 5.6 64 bit. I have upgraded (through WHM) MySQL to 5.5.24 and that was successful. After some research, the options I found were an intimidating Linux command with pipes greps and dashes, and another command yum remove mysql I tried that out and it appeared to remove mysql.....ish. I tried installing MariaDB from this instructions page and it started to do it's thing and then came the zillions of errors (here's a small sample): Transaction Check Error: file /etc/init.d/mysql from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysql_convert_table_format from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysql_install_db from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysql_secure_installation from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqlbug from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqld_multi from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqld_safe from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqldumpslow from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/bin/mysqlhotcopy from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/innochecksum.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/my_print_defaults.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/myisam_ftdump.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/myisamchk.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 file /usr/share/man/man1/myisamlog.1.gz from install of MariaDB-server-5.5.25-1.i386 conflicts with file from package MySQL-server-5.5.24-1.cp.1132.x86_64 So it appeared that MySQL wasn't removed correctly. I've read from different tutorials given on different sites that to install MariaDB, you had to uninstall/remove MySQL and there weren't any commands given on how to do this. Does anyone know how to "safely" remove MySQL on a WHM/cPanel server so that I can install MariaDB? Here's my repo file in case anyone needs to know... # MariaDB repository list - created 2012-07-10 17:09 UTC # http://downloads.mariadb.org/mariadb/repositories/ [mariadb] name = MariaDB baseurl = http://yum.mariadb.org/5.5/centos5-x86 gpgcheck=1

  Read the article

• Will this RAID5 setup work (3TB Seagate Barracudas + Adaptec RAID 6405)?

  - by Slayer537

  As the title states, will this RAID combo work, and if not what needs to be changed? Overall opinions would be most helpful. I currently run a small file server of about 5TB or so. I keep outgrowing my needs and need to build a RAID setup that will allow me to expand as needed. I am new to RAID setups, especially one of the scale I have currently planned out, but I have being doing some research for the past couple of weeks and have come up with a build. Ideally, I'd have the setup completely built, but I'd like to keep the total cost around $1k and can't afford to go above $1.5k, so unfortunately that's not an option. 2 of my current drives are WD Caviar Blacks 2TB; however, I have recently learned that due to the lack of TLER those drives are awful for any RAID setup other than 0 or 1. That being said, my third drive is a Seagate Barracuda 3TB (ST300DM001) and I have found a RAID controller that states it supports it, so I'd like to use this same type of drive, if possible. Have any of you had any experience using this drive or a similar one in a RAID5 configuration? The manufacturer states that it supports it, but knowing that it is not an enterprise drive, I am slightly concerned that it could drop out of the array. I would just go with enterprise drives, but those are about double in cost... Parts list: Storage rack: http://www.ebay.com/itm/SGI-3U-Media-Storage-Server-16-Hard-Drive-Bay-SATA-SAS-Expander-Omnistor-SE3016-/140735776937?pt=LH_DefaultDomain_0&hash=item20c48188a9 3 more HDs (for now..): http://www.amazon.com/Seagate-Barracuda-3-5-Inch-Internal-ST3000DM001/dp/B005T3GRLY/ref=dp_return_2?ie=UTF8&n=172282&s=electronics Adaptec RAID 6405: http://www.newegg.com/Product/Product.aspx?Item=N82E16816103224 here's a link to the compatibility sheet if that helps: http://download.adaptec.com/pdfs/compatibility_report/arc-sas_cr_03-27-12_series6.pdf SAS expander cable: http://www.pc-pitstop.com/sas_cables_adapters/8887-2M.asp My plan is to install the RAID card in my computer and then route the SAS cable to the rack. Setup a RAID5 on 3 drives, transfer my data over from my other drive, and then add that drive to the array. Eventually, I'd like to get a 2U unit and run the file server on that and move the RAID card over to there, but that will have to happen later on. Side note: The computer the card would be going into will be running Windows 7 Pro with 24GB of DDR3-1600 and an i7-930.

  Read the article

• Installing drivers for switchable graphics

  - by Anonymous

  I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

  Read the article

• Benchmarking hosting providers IO with Bonnie

  - by Derek Organ

  Ok, because of a bunch of projects I'm working on I've access to dedicated Servers on a 3 hosting providers. As an experiment and for educational purposes I decided to see if I could benchmark how good the IO is with each. Bit of research lead me to Bonnie++ So I installed it on the server and ran this simple command /usr/sbin/bonnie -d /tmp/foo The 3 machines in different hosting providers are all dedicated machines, one is a VPS, other two are on some cloud platform e.g. VMWare / Xen using some kind of clustered SAN for storage This might be a naive thing to do but here are the results I found. HOST A Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxxxxx 1G 45081 88 56244 14 19167 4 20965 40 67110 6 67.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 15264 28 +++++ +++ +++++ +++ +++++ +++ +++++ +++ +++++ +++ xxxxxxxx,1G,45081,88,56244,14,19167,4,20965,40,67110,6,67.2,0,16,15264,28,+++++,+++,+++++,+++,+++++,+++,+++++,+++,+++++,+++ HOST B Version 1.03d ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxx 4G 43070 91 64510 15 19092 0 29276 47 39169 0 448.2 0 ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 24799 52 +++++ +++ +++++ +++ 25443 54 +++++ +++ +++++ +++ xxxxxxx,4G,43070,91,64510,15,19092,0,29276,47,39169,0,448.2,0,16,24799,52,+++++,+++,+++++,+++,25443,54,+++++,+++,+++++,+++ HOST C Version 1.03c ------Sequential Output------ --Sequential Input- --Random- -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks-- Machine Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP /sec %CP xxxxxxxxxxxxx 1536M 15598 22 85698 13 258969 20 16194 22 723655 21 +++++ +++ ------Sequential Create------ --------Random Create-------- -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete-- files /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP /sec %CP 16 14142 22 +++++ +++ 18621 22 13544 22 +++++ +++ 17363 21 xxxxxxxx,1536M,15598,22,85698,13,258969,20,16194,22,723655,21,+++++,+++,16,14142,22,+++++,+++,18621,22,13544,22,+++++,+++,17363,21 Ok, so first off what is the best way to read the figures and are there any issues with really comparing these numbers? Is this in any way a true representation of IO Speed? If not is there any way for me to test that? Note: these 3 machines are using either Ubuntu or Debian (I presume that doesn't really matter)

  Read the article

• Setting up a fileserver, some questions?

  - by Tanax

  Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

  Read the article

• Setting up a fileserver, some questions?

  - by Tanax

  Recently I've become very interested in setting up a fileserver, mostly for home usage but also because of the fact that I live in 2 places, I need to be able to access my files from both homes. I have already done some research into this but I am unclear about some things. My requirements are the following; Needs to work on both Mac and PC(only using Windows atm on PC but could be good if it supports more OS's to make it futureproof in case I need Linux or something else) Need to be able to set up a folder/drive/network space to act as a link to a certain folder on the fileserver All files should only be stored on the fileserver, e.g. no "shared" folders like in Dropbox where files are stored on the client computer Would prefer it if folders are password protected or that I can somehow specify what users can access the fileserver's shares Fileserver's OS most likely have to be Windows due to other factors outside of being just a fileserver I've already kinda figured out that I will need to set up a VPN so that I can access my fileserver from outside the local network. Probably going to use OpenVPN. Question 1: How would I go about to set up a VPN server so that I can connect to my local network at the fileserver's location? I know that since I'm on a dynamic IP I will have to get some sort of dynamic DNS server - I've already checked into this and I'm fairly sure I know how to fix that. I also know that I will have to forward the port OpenVPN uses in my router. Question 2: How would I actually share the folders on the fileserver so that I can access them on my other computers? I've researched into Samba but I'm uncertain if it needs to be run on a Linux OS. I know that the clients connecting to it can be Windows for example but can the Samba "server" be run on Windows? Also it appears that Samba shares a folder, meaning it works like Dropbox - I don't want that. So how would I share a folder in that case to make it work like I want it to? Sorry for the incredibly long question, I tried to structure it the best I could for easier read. Thanks in advance!

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

• Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem

  - by zchads

  Router reconfigures PC's and they can no longer access the internet via hardwired connection to DSL Modem. Hardware Information: Buffalo Wireless Router/access point, Model: WZR-HP-G300NH-AP DSL Modem: Generic (actually not sure of manufacture). Service Provider: TOT (Thailand) Laptop-1: Windows XP and Belkin PCMIA Network Card Laptop-2: Windows XP unknown network card & Wifi Laptop-3: Windows 7 unknown network card & Wifi Outline of Problem/actions taken: After a recent power failure the router and laptop-1 connected to router were no longer able to access the internet. Actions taken to try and recover internet access: Using Laptop-1 tried to configure Router with PPPoe settings using software from Router Manufacture. During the installation process a Timeout error was experienced, unable to connect to WAN. Used Internet Explorer to communicate directly with Router using IP address. Changed settings to use PPPoe settings given by ISP. Router was not able to communicate with Internet. Repeated steps 1-4 again with no success. Reset Router and DSL modem. Repeated steps 1-4 again still no success. Tried connecting Laptop-1 directly to DSL to gain access to internet to research problem. No Network connection with DSL could be established…connection would be established for a second and then be lost and didn’t appear long enough to actually connect to DSL. Replugged LAN back into Router and connection was regained with laptop-1. Replugged Laptop-1 directly into DSL and again unable to establish network connection. Uninstalled network card and all of its drivers on Laptop-1. Reinstalled network card and drivers and tried connecting directly to DSL. Still unable to make network connection. Plugged DSL into Laptop-3 and Internet connection was established. Being Laptop-3 does not have a CD-Rom, Laptop-2 was tried to connect to the router. With Laptop-2 steps 1-7 ended up being repeated without success. Tried plugging Laptop-2 directly into DSL and again no network connection could be established. Using Laptop-3 with a direct connection to DSL downloaded latest Router FW. Installed router FW using Laptop-1. Tired the installation process again without success. Being desperate reinstalled OS on Laptop-1 still not success. Tried using “ipconfig” with router to see what was going on without success. With laptop-1 connected to DSL went through the “ipconfig /…” inputs to see if anything made a difference. Being the network card was not able to make a connection this provide very little information “media disconnected”. So now I have a router and two laptops which are unable to connect to the internet and sure could use some advice/help.

  Read the article

• How can I prevent an unintentional DDOS running ColdFusion 8 with IIS 6?

  - by Eric Belair

  We had an interesting outage today on one of our client's websites. Out of nowhere, the website was inaccessible. The website runs by itself on a dedicated physical Windows 2000 server (probably overkill, I know, but that's a discussion for a different day). After restarting IIS and ColdFusion Application Service, the problem came back several times. My initial thought was that it was a DNS issue, which happens occasionally - the last time it happened was after Hurricane Sandy when we our ISP was out, and we had to make some network config changes. But, it was not a DNS issue. My second thought was that it was a DDOS attack, but, there's very little reason anyone would want to take this site down. When we called our ISP, the operator on the other end noted that traffic was spiking significantly. As it turned out, the client had unintentionally caused a DDOS on the website, after they FTPed a very large video file, and then mass emailed a link to it. Hundreds of people clicked the link and brought the site to its knees. I am primarily a Website Programmer, but I often have to contribute to server administration at times. Sadly, I'm the resident ColdFusion and IIS expert, but I don't have a lot of experience with this issue. What are some basic steps that I can take to prevent this from happening in the future, since we cannot always control what files the client posts to the website. Here are some ideas I had, but I'm unsure of the impact: Limit the number of connections in IIS. Put media files on a separate server (like an Amazon site, etc.). File requests of this type currently behind a server-script (i.e. /www.site.com/viewFile.cfm?fileId=1424545, where the fileId references a file off the webroot) that logs requests, and pushes the file to the browser using CFCONTENT. I could edit this script to reject requests when they exceed a certain amount in a given time-frame (i.e. a 5MB can be accessed globally 10 times in an hour). This may cause some users frustration, but, if hundreds of users are attempting to view the file, the site is going to crash anyways, as it did today, which is way more frustrating, since there is no "pretty" message explaining why they can't get to the file. I'm open to any suggestions, as I'm continuing my research to report to the CTO with the best options, so that we can put a solution into effect. Thank you.

  Read the article

• Subversion - Retrieval of mergeinfo unsupported

  - by jamesthomson

  Hi, I've recently updated my Subversion package on Debian Etch to 1.5.1 via a back-port. I've gone through what I believe are all the appropriate steps but cannot for the life of me get past the following error message when I try to merge: Retrieval of mergeinfo unsupported by '.' The '.' isn't important as I get the same message whether I'm SSH'd on to the server or using TortoiseSVN through Windows. I'll take you through what I did to upgrade and test step by step: Update of Subversion Added the following line to /etc/apt/sources.list: deb http://www.backports.org/debian etch-backports main contrib non-free and then ran apt-get -s -t etch-backports install subversion Checked the version of the subversion installation Done this by running svnadmin --version and got the following output: svnadmin, version 1.5.1 (r32289) compiled Dec 11 2008, 18:10:14 Checked the client too using svn --version and got the following svn, version 1.5.1 (r32289) compiled Dec 11 2008, 18:10:14 Ok, so all looking good so far. Now I just need to upgrade the repository. After plenty of research, the most foolproof way to do this seemed to be to dump the repository and then load it again. So here's what I did: svnadmin dump /var/svn/repo > repo.dump rm -aR /var/svn/repo/* svnadmin create /var/svn/repo svnadmin load < repo.dump All that seemed to work fine. I then checked to see if the repository had been upgraded by looking at the contents of /var/svn/repo/db/format which gave: 3 layout sharded 1000 Again this indicated a Subversion 1.5 repository so all looking good. Now I try and do a merge using the Subversion client in Debian: svn mergeinfo https://mysvn/repo . and I get the following error: svn: Retrieval of mergeinfo unsupported by '.' I get the same error message whether I'm using the Debian shell on the same server or if I'm connecting via TortoiseSVN and a Windows box. If I browse to the repository using my web browser, the version number at the bottom reads: Powered by Subversion version 1.4.2 (r22196). In case it helps, the created date on mod_dav_svn.so is 2009-08-06 18:29 I just cannot figure out why I'm getting this message so any help pointing me in the right direction would be greatly appreciated. All the forum and mailing list posts that I found relating to this error were solved by doing an svnadmin upgrade, though I have actually tried that and still no joy. Thanks in advance, James.

  Read the article

• How can I play my MP3 files through my stereo system?

  - by Joel Coehoorn

  Here's the situation. Like many others I have my entire CD collection ripped to my PC, along side other music I've acquired through iTunes or Amazon MP3. Also like many others the speakers at my PC are underpowered, and likely included in my monitor as an afterthought. This is fine for most use: system sounds, YouTube, etc. Even games sounds and music. But I'd like something a little better for when I really want to listen to music. And I have it; in the next room — barely 25 feet away as the crow flies — sits a nice 400 watts stereo system. The stereo supports MP3 CDs, so up to this point I've just kept a few CD-RW disks around to keep most of my collection available. But it's time to move on to something a little more sophisticated. What are my options for using the MP3 files available on my computer as an input for this stereo? Some notes: I want to be able to control what song the stereo is playing without having to go to the PC, including setting up and retrieving playlists. Ideally this should even be able to wake the PC from sleep mode to start playing. I primarily use Windows Media Player on the PC (which runs Windows Vista). However, the files themselves live on a server running Windows Server 2008, and so I could also install something on the server and run everything from there. The axillary input on the stereo is unfortunately limited to a 1/8 inch stereo mini-plug. I'm loath to run wires across two rooms, and I'm considering moving the stereo to the garage at some point. Therefore a wireless solution that can easily cover about 100 ft or so is preferred. I already have a Wi-Fi network ready, but it's secured so anything using Wi-Fi should make it easy to set up security. Bonus points for doing it in under $85 shipped at Amazon (I'm hoping to pay for this via $85 worth of Amazon gift cards). I know this a pretty tight budget, so just getting close is okay. Bonus points for something that remembers multiple profiles (keep my favorite songs separate from the wife's). Bonus points for a remote that can also replace my stereo remote, so I only need one device to control everything. I'm not holding my breath on this one given my price range, though. Bonus points if I can also use for Internet radio. Doing some research on my own as well. This looks like it'll do exactly what I want, but it lists at an outrageous $299: http://www.linksysbycisco.com/US/en/products/DMP100

  Read the article

• X:\ is not accessible. Insufficient system resources exist to complete the requested service. Help [

  - by Katherine

  I keeping getting the error message from above on multiple computers that I administer. I wasn't sure if I should be posting this on SuperUser or ServerFault so my apologizes if it should go there... Basically, I have at least 5 computers of varying ages (some fresh out of the box!) throwing the above error. X:\ is one of our network drives that is mapped for users. Most of the time if you shut down the biggest application it will fix the problem, but it's becoming an increasing issue, and I can't keep running around fixing it manually. I have tried to do some research, but most of it just states the obvious without supplying a permanent fix. The machines are all running Win XP SP3, with at least 2gb of ram. Sorry for the delay in getting back to people... a lot of good questions. To respond back to people... It is a windows 2003 server that houses the file share. We have about 175 users, however i cannot state how many are actually accessing the information at a single moment. Considering that this is our largest file share, I would say that probably at least 100+. The files we work with are large, but not that big considering that we do a lot of graphical and video work. ~50mb. That being said, this is error occurs simply when trying to gain access to the server itself, not actual files. When I say close a program, I mean that it can be any program. It doesn't matter which program. It varies from machine to machine, and from day to day. Some days it is Firefox, some days it is Outlook, some days it is Excel. There doesn't seem to be a common bond behind which application could be causing the problem. Thank you for the articles, and the recommendation on paging files. I will have to look into that. None of our computers are set to hibernate, so I am going to rule that out.

  Read the article

• Having troubles connectiong Magento to external Windows Database Server using Windows Azure

  - by Kevin H

  "I tried to make this easy to read through" I am using Ubuntu 12.04 LTS for Magento and installed these commands onto the system: sudo apt-get install apache2 sudo apt-get install php5 libapache2-mod-php5 sudo apt-get install php5-mysql sudo apt-get install php5-curl php5-mcrypt php5-gd php5-common sudo apt-get install php5-gd I used Windows Server 2008 R2 August 2012 for Mysql Server For a reference, I used http://www.windowsazure.com/en-us/manage/windows/common-tasks/install-mysql/ When the server was setup, I added an empty disk to it Then, I added endpoints 3306 Next I accessed the server remotely After that, I formatted the empty disk and was inserted as F: Next I downloaded Mysql from http://*.mysql.com version Windows (x86, 64-bit), MSI Installer 5.5.28 In the installation process, I used these settings: Typical Setup - Clicked Next, install, next Chose Detailed Configuration - Clicked next Chose Dedicated MySQL Server Machine - Clicked Next Chose Transactional Database Only - Clicked Next Chose the "F:" Drive - Clicked Next Chose Online Transactional Processing (OLTP) - Clicked Next For Networking Options, I checkmarked 'Enable TCP/IP Networking" 'Add firewall exception for this port' 'Enable Strict Mode' - Clicked Next Chose Standard Character Set - Clicked Next For Windows Options, I checkedmarked 'Install as Window Service" 'Launch the MySQL Server automatically' 'Include Bin Directory in Windows PATH - Clicked Next For Security Options, I checkmarked 'Modify Security Settings' and set root password - Clicked Next Finally clicked Execute and Finish These are the Firewall Setting that I set I clicked inbound rules Properties Scope Allow IP Address and used the internal Address for Magento Server Clicked Apply and exited Next, I opened up MySQL 5.x Command Line Client Entered Root Password Then entered these commands mysql create database magento; mysql Create user magentouser identified by 'password'; mysql Grant select, insert, create, alter, update, delete, lock tables on magento.* to magentouser mysql exit Finally, I opened up the Magento Downloader Magento validation has approved all PHP version is right. Your version is 5.3.10-1ubuntu3.4. PHP Extension curl is loaded PHP Extension dom is loaded PHP Extension gd is loaded PHP Extension hash is loaded PHP Extension iconv is loaded PHP Extension mcrypt is loaded PHP Extension pcre is loaded PHP Extension pdo is loaded PHP Extension pdo_mysql is loaded PHP Extension simplexml is loaded These are all installed on Magento Server For the Database Connection, I used: The Database server only has MySQL 5.5 Server installed on it Host - Internal IP address User Name - The User I created when setting up database Password - The Password I created when setting up database For the password, I did some research and found out that Magento only accepts alphanumeric, so I went and set it up again and used only alphanumeric for the User password Now, I am still getting Accessed denied for database Connection. Also, I have tryed to setup mysql on independant Linux Server but kept getting errors. When, I found the solution. Wouldn't work, so I decided to try Windows. These is the questions, I have been asking and researching to debug this issue Is it because I am using Linux for magento and Windows for Database. I have had no luck in finding a reason why this wouldn't work There must be something, I am missing I also researched the difference between linux sql databases and windows sql databases but have not come to conclusion, if installing Mysql on windows would make a difference in syntax and coding. I have spent a lot of time looking into this and need some help with direction on how to complete my project. Any type of help would be appreciated.

  Read the article

• Postfix: How to apply header_checks only for specific Domains?

  - by Lukas

  Basically what I want to do is rewriting the From: Header, using header_checks, but only if the mail goes to a certain domain. The problem with header_check is, that I can't check for a combination of To: and From: Headers. Now I was wondering if it was possible to use the header_checks in combination with smtpd_restriction_classes or something similar. I've found a lot information about header_checks and multiple header fields, when searching the net. All of them basically telling me, that one can't combine two header for checking. But I didn't find any information if it was possible to only do a header check if a condition (eg. mail goes to example.com) was met. Edit: While doing some more Research I've found the following article which suggests to add a Service in postfix master.cf, use a transportmap to pass mails for the Domain to that service and have a separate header_check defined with -o. The thing is that I can't get it to work... What I did so far is adding the Service to the master.cf: example unix - - n - - smtpd -o header_checks=regexp:/etc/postfix/check_headers_example Adding the followin Line to the transportmap: example.com example: Last but not least I have two regexp-files for header checks, one for the newly added service, and one to redirect answers to the rewritten domain. check_headers_example: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 Obviously if someone answers, the mail would go to nirvana, so I have the following check_headers defined in the main postfix process: /To:(.*)<(.*)@mydomain.example.com>(.*)/ REDIRECT [email protected]$2 Somehow the Transport is ignored. Any help is appreciated. Edit 2: I'm still stuck... I did try the following: smtpd_restriction_classes = header_rewrite header_rewrite = regexp:/etc/postfix/rewrite_headers_domain smtpd_recipient_restrictions = (some checks) check_recipient_access hash:/etc/postfix/rewrite_table, (more checks) In the rewrite_table the following entries exist: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 All it gets me is a NOQUEUE: reject: 451 4.3.5 Server configuration error. I couldn't find any resources on how you would do that but some people saying it wasn't possible. Edit 3: The reason I asked this question was, that we have a customer (lets say customer.com) who uses some aliases that will forward mail to a domain, let's say example.com. The mailserver at example.com does not accept any mail from an external server that come from a sender @example.com. So all mails that are written from example.com to [email protected] will be rejected in the end. An exception on example.com's mailserver is not possible. We didn't really solve this problem, but will try to work around it by using lists (mailman) instead of aliases. This is not really nice though, nor a real solution. I'd appreciate all suggestions how this could be done in a proper way.

  Read the article

• Ubuntu: Multiple NICs, one used only for Wake-On-LAN

  - by jcwx86

  This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

  Read the article

• Wiimote accelerometer input on Windows? (in 2013 - Glovepie alternative?)

  - by user568458

  There were a few options for getting accelerometer input into Windows using a Nintendo Wiimote. As of mid 2013, these projects seem to be dead, corrupted with malware, or both. Are there any tools out there that can do this that are still available (and not full of malware)? Quick roundup of the options that used to exist, or that still exist but aren't suitable: Glovepie, which used to be the most recommended option, appears to be dead: it's own website hacked, its creator's googlepages page full of strange stuff that sounds like hacker-humour about the end of the world... (I'd rather not link to them, very dubious stuff...), and lots of forum threads asking if it's a dead project with comments along the lines of "I heard that the author intends to return to it" dated 2011... Wiiuse seems to be dead: its sourceforge page simply says "Error.", its own website has turned into a squatter page. There apparently was an extension for Autohotkey that allowed Wiimote input, but I've seen warnings that this too is now full of malware (see final commentin above link) Everything else I can find about using Wiimotes as input on Windows - for example, Johnny Lee Cheng's work - seems to be exclusively about using infrared or sensor bar, or tied to a specific purpose (e.g. FPS gaming). My main interest is in the accelerometer, and buttons if possible (although something that supports the IR stuff too would be ideal). Is there anything that works for getting Wiimote accelerometer input into Windows that is reliable and not a malware-fest? If anyone's interested in "Why?", it's to use the Wiimote as an audio / midi controller: to use movement, pitch, roll etc to modulate lots of different sound variables at once with one hand. Wiimotes are great for this, and Glovepie used to be the standard way to make this work (e.g. see for example this tutorial, and this one, ignore the unrelated video; I've also seen musicians using wiimote/glovepie setups at gigs, creating some really unique sounds). As of 2013, however, Glovepie seems to be a dead and thoroughly hacked project, sadly. Is there anything else? With or without MotionPlus is fine (with would be better). If anyone knows of any worthy alternatives to Wiimotes in terms of price and quality that can be made to work with a PC, that would also be great: but in my research I coulnd't find any (here's a link to someone reaching the same conclusion). found some potentially relevant stuff here, not had time to test any of it yet though - http://stackoverflow.com/questions/2984450/using-accelerometer-in-wiimote-for-physics-practicals

  Read the article

• PHP at the root directory using Ngnix on Linode and Ubuntu 12.04

  - by Steve Kinney

  I originally set up my Linode to use it with the Sinatra applications using Phusion Passenger that I was developing and I have it working great for that. However, as time goes on, I find myself needing just a wee bit of PHP to do a server-side thing here or there. My basic set up was based off of this Linode recipe (I copied and pasted the parts that I needed—I did not install Redis and Node). If I go to http://scholarsnyc.com/index.php everything works great. If I just go the base URL however, I get a 403 Forbidden error (I have a vanilla HTML page there for now). I've played with file permissions and the same file will work if I call it directly. I've done my homework and nothing I try seems to work. I'm sure there is an obvious error. I'm also sure that there are some rookie mistakes in my Nginx configuration (some of those mistakes are the artifacts of trying different fixes from my research. user www-data www-data; worker_processes 1; events { worker_connections 1024; } upstream php { server 127.0.0.1:9001; } http { passenger_root /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.12; passenger_ruby /usr/local/bin/ruby; include mime.types; default_type application/octet-stream; index index.php index.html index.htm; sendfile on; keepalive_timeout 65; server { server_name localhost scholarsnyc.com www.scholarsnyc.com; root /srv/www/scholarsnyc.com/public; location / { index index.php; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server { server_name data.scholarsnyc.com; root /srv/www/data.scholarsnyc.com/public; passenger_enabled on; } server { server_name tech.scholarsnyc.com; root /srv/www/tech.scholarsnyc.com/public; location / { root /srv/www/tech.scholarsnyc.com/public; index index.php index.html index.htm; } } } Any other optimizations are also appreciated. I literally don't know what to do at this point.

  Read the article

• Windows DHCP Server - get notification when a non-AD joined device gets an IP address

  - by TheCleaner

  SCENARIO To simplify this down to it's easiest example: I have a Windows 2008 R2 standard DC with the DHCP server role. It hands out IPs via various IPv4 scopes, no problem there. WHAT I'D LIKE I would like a way to create a notification/eventlog entry/similar whenever a device gets a DHCP address lease and that device IS NOT a domain joined computer in Active Directory. It doesn't matter to me whether it is custom Powershell, etc. Bottom line = I'd like a way to know when non-domain devices are on the network without using 802.1X at the moment. I know this won't account for static IP devices. I do have monitoring software that will scan the network and find devices, but it isn't quite this granular in detail. RESEARCH DONE/OPTIONS CONSIDERED I don't see any such possibilities with the built in logging. Yes, I'm aware of 802.1X and have the ability to implement it long-term at this location but we are some time away from a project like that, and while that would solve network authentication issues, this is still helpful to me outside of 802.1X goals. I've looked around for some script bits, etc. that might prove useful but the things I'm finding lead me to believe that my google-fu is failing me at the moment. I believe the below logic is sound (assuming there isn't some existing solution): Device receives DHCP address Event log entry is recorded (event ID 10 in the DHCP audit log should work (since a new lease is what I'd be most interested in, not renewals): http://technet.microsoft.com/en-us/library/dd759178.aspx) At this point a script of some kind would probably have to take over for the remaining "STEPS" below. Somehow query this DHCP log for these event ID 10's (I would love push, but I'm guessing pull is the only recourse here) Parse the query for the name of the device being assigned the new lease Query AD for the device's name IF not found in AD, send a notification email If anyone has any ideas on how to properly do this, I'd really appreciate it. I'm not looking for a "gimme the codez" but would love to know if there are alternatives to the above list or if I'm not thinking clear and another method exists for gathering this information. If you have code snippets/PS commands you'd like to share to help accomplish this, all the better.

  Read the article

• UAE and the mysteries of unreachable websites

  - by 0plus1

  I write here because I'm really lost, please stay with me because it's not easy to explain. A company asked me to set-up a private server, now I'm a programmer so I got a solution with technical support and cpanel which helped me to setup everything and it's working smoothless. I'm by no means a professional sysadmin, but I have a fair knowledge of server configurations, but this problem is way over my knowledge, and apparently way over the knowledge of most sysadmins, I really hope that here I'll find someone with enough experience to help me or at least give me more insight. Now this company for which I'm consulting operates in the UAE (United Arab Emirates) and from there the server is almost unreachable. It started with ns not registering in the UAE, after a week that sorted itself out and now the site is indeed reachable, but it takes almost 2 minutes to load a webpage with one line of text. Emails go in timeout. The domain currently parked there has been bought appositely for tests, the main one that was supposed to go there, after a catastrophic week has been transferred to a shared hosting solution in the UK, and from there it works like a charme. Now after doing some research I discovered that I'm not alone in this, there are several reports of webmasters discovering that their website is not reachable inside the UAE, and mind this has nothing to do with the state-wide block of questionable sites, because in that case an error message appears, this seems to be related to the infrastructure of the UAE, which apparently reroutes everything through their own "fake" internet. Apparently new servers with their own IP are not recognized (yet?) by the UAE infrastructure, while shared hosting solutions seeing that they operates tons of other websites are more likely to be part of the UAE network. Now my questions are: 1) Has someone a real explanation for this? The only thing I can think of is that the server is on a new IP that is not yet recognized by the UAE, but that doesn't explain why it loads (even if after 2 minutes). I don't have any help from within the UAE as the only people that are "experts" are questionable companies that simply try to sell their own services. 2) If there is really some kind of block of new servers, is it possible to know before if a server is reachable from within the UAE, currently this is not a ns problem as even accessing the server with its IP result in a 2 minute wait. 3) Can it be that the problem lies somewhere else? There are some tests that I can perform? I'm not physically in the UAE, but I can ask the people there, or use teamviewer. Could it be some misconfiguration on the server (mind that the site works EVERYWHERE else in the world). Thank you for ANY kind of help

  Read the article

• WIndows 7 cannot boot - bootrec reports FS not found or corrupt

  - by purecharger

  For 3 days now I've been unable to boot into my Windows 7 partition, and all my research has been to no avail. I'm hoping someone here has more ideas on how to fix this. When I boot up now, I get the black screen with BCD error that says theres no valid file system or it may be corrupt (pardon my lack of detail, no copy/paste is available then). When I boot with the Windows 7 disc and go into repair tools, no operating system is found, and attempting to automatically repair the problem fails with Unknown Operating System (Unknown Disk) or something similar. When I drop into the command prompt, I am able to see and navigate my C:\ drive without issue. I attempt to use bootrec: C:\> bootrec /ScanOS Finds C:\Windows as a system partition. C:\> bootrec /RebuildBCD Fails with volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted. So then I attempt to fix the bootsector: C:\> bootsect /nt60 C: /force Which completes successfully (sorry, no output..) Upon rebooting, I have the same problem. I've also tried all of the above after making my Windows partition active: C:\> diskpart DISKPART> select disk 1 DISKPART> select partition 1 DISKPART> active DISKPART> exit Then bootrec as above, both with and without a reboot after the DISKPART commands. Then I've also tried rebuilding the BCD store by hand: set systemdrive=C: set tempbcd=C:\boot\bcd.temp set tempfile=C:\boot\temp.txt bcdedit -createstore %tempbcd% bcdedit.exe -store %tempbcd% -create {bootmgr} -d "Windows Boot Manager" bcdedit -store %tempbcd% -create -d "Windows Vista" -application osloader>%tempfile% set /p winvistaguid= <%tempfile% set winvistaguid=%winvistaguid:~10,38% bcdedit -store %tempbcd% -set %winvistaguid% osdevice partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% device partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% path \Windows\system32\winload.exe bcdedit -store %tempbcd% -set %winvistaguid% systemroot \Windows bcdedit -import %tempbcd% However on the import, I get my familiar friendly message: volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted I'm at my wits end here, and I cannot understand why Windows refuses to see this as a valid install. When I list the disk/partition in DISKPART, it shows up as NTFS and "Healthy", and I can navigate the directory structure from DOS with no problems. I really, really do not want to reformat and reinstall. I know this problem can be solved!

  Read the article

• WIndows 7 cannot boot - bootrec reports FS not found or corrupt

  - by purecharger

  For 3 days now I've been unable to boot into my Windows 7 partition, and all my research has been to no avail. I'm hoping someone here has more ideas on how to fix this. When I boot up now, I get the black screen with BCD error that says theres no valid file system or it may be corrupt (pardon my lack of detail, no copy/paste is available then). When I boot with the Windows 7 disc and go into repair tools, no operating system is found, and attempting to automatically repair the problem fails with Unknown Operating System (Unknown Disk) or something similar. When I drop into the command prompt, I am able to see and navigate my C:\ drive without issue. I attempt to use bootrec: C:\> bootrec /ScanOS Finds C:\Windows as a system partition. C:\> bootrec /RebuildBCD Fails with volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted. So then I attempt to fix the bootsector: C:\> bootsect /nt60 C: /force Which completes successfully (sorry, no output..) Upon rebooting, I have the same problem. I've also tried all of the above after making my Windows partition active: C:\> diskpart DISKPART> select disk 1 DISKPART> select partition 1 DISKPART> active DISKPART> exit Then bootrec as above, both with and without a reboot after the DISKPART commands. Then I've also tried rebuilding the BCD store by hand: set systemdrive=C: set tempbcd=C:\boot\bcd.temp set tempfile=C:\boot\temp.txt bcdedit -createstore %tempbcd% bcdedit.exe -store %tempbcd% -create {bootmgr} -d "Windows Boot Manager" bcdedit -store %tempbcd% -create -d "Windows Vista" -application osloader>%tempfile% set /p winvistaguid= <%tempfile% set winvistaguid=%winvistaguid:~10,38% bcdedit -store %tempbcd% -set %winvistaguid% osdevice partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% device partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% path \Windows\system32\winload.exe bcdedit -store %tempbcd% -set %winvistaguid% systemroot \Windows bcdedit -import %tempbcd% However on the import, I get my familiar friendly message: volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted I'm at my wits end here, and I cannot understand why Windows refuses to see this as a valid install. When I list the disk/partition in DISKPART, it shows up as NTFS and "Healthy", and I can navigate the directory structure from DOS with no problems. I really, really do not want to reformat and reinstall. I know this problem can be solved!

  Read the article

• Building a Mac/PC Network in a Dorm with Network Restrictions

  - by user70340

  I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >