Search Results

Search found 9647 results on 386 pages for 'cross compile'.

Page 132/386 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• Creating a cocoa Application without nib files/fully pragmatic

  - by Moddy

  Yes, I know this goes against the whole MVC principle! However, I'm just trying to whip up a pretty trivial application - and I've pretty much implemented it pragmatically. However, I have a problem... I create an Empty Project, copy all the frameworks over and set the build settings - and I get errors about the executable.. or lack of executable. The build settings all appear fine, but it tells me there is no executable - it will build + run fine.. however it doesn't run. There is no error either - it just appears to run very fast and cleanly! Unless I try and run gdb which politely tells me I need to give it a file first.. Running… No executable file specified. Use the "file" or "exec-file" command. So I created a Cocoa Application, removed all the stuff I didn't need (i.e the MainMenu.xib file..) and now I can compile my code perfectly.. however it dies with complaining that its "Unable to load nib file: MainMenu, exiting" I have gone through the Project Symbols and see that the code actually relies upon the nib file heavily, even if you don't touch it code-wise. (MVC again I guess..) So my question is - is there a simple way to compile just what you code, no added nib files, just the code you write and the frameworks you add? I assume it would be a blank project but my experience tells me otherwise?!

  Read the article

• Question about compilers and how they work

  - by Marin Doric

  This is the C code that frees memory of a singly linked list. It is compiled with Visual C++ 2008 and code works as it should be. /* Program done, so free allocated memory */ current = head; struct film * temp; temp = current; while (current != NULL) { temp = current->next; free(current); current = temp; } But I also encountered ( even in a books ) same code written like this: /* Program done, so free allocated memory */ current = head; while (current != NULL) { free(current); current = current->next; } If I compile that code with my VC++ 2008, program crashes because I am first freeing current and then assigning current-next to current. But obviously if I compile this code with some other complier ( for example, compiler that book author used ) program will work. So question is, why does this code compiled with specific compiler work? Is it because that compiler put instructions in binary file that remember address of current-next although I freed current and my VC++ doesn't. I just want to understand how compilers work.

  Read the article

• Why Does Private Access Remain Non-Private in .NET Within a Class?

  - by AMissico

  While cleaning some code today written by someone else, I changed the access modifier from Public to Private on a class variable/member/field. I expected a long list of compiler errors that I use to "refactor/rework/review" the code that used this variable. Imagine my surprise when I didn't get any errors. After reviewing, it turns out that another instance of the Class can access the private members of another instance declared within the Class. Totally unexcepted. Is this normal? I been coding in .NET since the beginning and never ran into this issue, nor read about it. I may have stumbled onto it before, but only "vaguely noticed" and move on. Can anyone explain this behavoir to me? Am I doing something wrong? I found this behavior in both C# and VB.NET. The code seems to take advantage of the ability to access private variables. Sincerely, Totally Confused Class Foo Private _int As Integer Private _foo As Foo Private _jack As Jack Private _fred As Fred Public Sub SetPrivate() _foo = New Foo _foo._int = 3 'TOTALLY UNEXPECTED _jack = New Jack '_jack._int = 3 'expected compile error because Foo doesn't know Jack _fred = New Fred '_fred._int = 3 'expected compile error because Fred hides from Foo End Sub Private Class Fred Private _int As Integer End Class End Class Class Jack Private _int As Integer End Class

  Read the article

• Calling SDL/OpenGL from Assembly code on Linux

  - by Lie Ryan

  I'm write a simple graphic-based program in Assembly for learning purpose; for this, I intended to use either OpenGL or SDL. I'm trying to call OpenGL/SDL's function from assembly. The problem is, unlike many assembly and OpenGL/SDL tutorials I found in the internet, the OpenGL/SDL in my machine apparently doesn't use C calling convention. I wrote a simple program in C, compile it to assembly (using -S switch), and apparently the assembly code that is generated by GCC calls the OpenGL/SDL functions by passing parameters in the registers instead of being pushed to the stack. Now, the question is, how do I determine how to pass arguments to these OpenGL/SDL functions? That is, how do I figure out which argument corresponds to which registers? Obviously since GCC can compile C code to call OpenGL/SDL, so therefore there must be a way to figure out the correspondence between function arguments and registers. In C calling conventions, the rule is easy, push parameters backwards and return value in eax/rax, I can simply read their C documentation and I can easily figure out how to pass the parameters. But how about these? Is there a way to call OpenGL/SDL using C calling convention? btw, I'm using yasm, with gcc/ld as the linker on Gentoo Linux amd64.

  Read the article

• Cannot implicity convert type void to System.Threading.Tasks.Task<bool>

  - by sagesky36

  I have a WCF Service that contains the following method. All the methods in the service are asynchrounous and compile just fine. public async Task<Boolean> ValidateRegistrationAsync(String strUserName) { try { using (YeagerTechEntities DbContext = new YeagerTechEntities()) { DbContext.Configuration.ProxyCreationEnabled = false; DbContext.Database.Connection.Open(); var reg = await DbContext.aspnet_Users.FirstOrDefaultAsync(f => f.UserName == strUserName); if (reg != null) return true; else return false; } } catch (Exception) { throw; } } My client application was set to access the WCF service with the check box for the "Allow generation of asynchronous operations" and it generated the proxy just fine. I am receiving the above subject error when trying to call this WCF service method from my client with the following code. Mind you, I know what the error message means, but this is my first time trying to call an asynchronous task in a WCF service from a client. Task<Boolean> blnMbrShip = db.ValidateRegistrationAsync(FormsAuthentication.Decrypt(cn.Value).Name); What do I need to do to properly call the method so the design time compile error disappears? Thanks so much in advance...

  Read the article

• Problems compiliing c++ code using cygwin

  - by user343403

  I am trying to compile some source code in cygwin (in windows 7) and get the following error when I run the make file g++ -DHAVE_CONFIG_H -I. -I.. -I.. -Wall -Wextra -Werror -g -O2 -MT libcommon_a Fcntl.o -MD -MP -MF .deps/libcommon_a-Fcntl.Tpo -c -o libcommon_a-Fcntl.o `test -f 'Fcntl.cpp' || echo './'`Fcntl.cpp Fcntl.cpp: In function int setCloexec(int): Fcntl.cpp:8: error: 'F_GETFD' was not declared in this scope Fcntl.cpp:8: error: 'fcntl' was not declared in this scope Fcntl.cpp:11: error: 'FD_CLOEXEC' was not declared in this scope Fcntl.cpp:12: error: 'F_SETFD' was not declared in this scope make[4]: *** [libcommon_a-Fcntl.o] Error 1 make[4]: Leaving directory `/abyss-1.1.2/Common' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/abyss-1.1.2' make[2]: *** [all] Error 2 make[2]: Leaving directory `/abyss-1.1.2' make[1]: *** [.build-conf] Error 2 make[1]: Leaving directory `/cygdrive/c/Users/Martin/Documents/NetBeansProjects/abyss-1.1.2_1' make: *** [.build-impl] Error 2 The problem file is:- #include "Fcntl.h" #include <fcntl.h> /* Set the FD_CLOEXEC flag of the specified file descriptor. */ int setCloexec(int fd) { int flags = fcntl(fd, F_GETFD, 0); if (flags == -1) return -1; flags |= FD_CLOEXEC; return fcntl(fd, F_SETFD, flags); } I don't understand what is going on, the file fcntl.h is available and the varaiables that it says were not declared in this scope do not give an error when I compile the file on its own Any help would be much appreciated Many Thanks

  Read the article

• Java Matcher groups: Understanding The difference between "(?:X|Y)" and "(?:X)|(?:Y)"

  - by user358795

  Can anyone explain: Why the two patterns used below give different results? (answered below) Why the 2nd example gives a group count of 1 but says the start and end of group 1 is -1? public void testGroups() throws Exception { String TEST_STRING = "After Yes is group 1 End"; { Pattern p; Matcher m; String pattern="(?:Yes|No)(.*)End"; p=Pattern.compile(pattern); m=p.matcher(TEST_STRING); boolean f=m.find(); int count=m.groupCount(); int start=m.start(1); int end=m.end(1); System.out.println("Pattern=" + pattern + "\t Found=" + f + " Group count=" + count + " Start of group 1=" + start + " End of group 1=" + end ); } { Pattern p; Matcher m; String pattern="(?:Yes)|(?:No)(.*)End"; p=Pattern.compile(pattern); m=p.matcher(TEST_STRING); boolean f=m.find(); int count=m.groupCount(); int start=m.start(1); int end=m.end(1); System.out.println("Pattern=" + pattern + "\t Found=" + f + " Group count=" + count + " Start of group 1=" + start + " End of group 1=" + end ); } } Which gives the following output: Pattern=(?:Yes|No)(.*)End Found=true Group count=1 Start of group 1=9 End of group 1=21 Pattern=(?:Yes)|(?:No)(.*)End Found=true Group count=1 Start of group 1=-1 End of group 1=-1

  Read the article

• eclipse show errors but compiles when external makefile

  - by Anthony

  I have some c++ code using CImg and Eigen libraries. At the c++ code I define a plugin like this #define cimg_plugin1 "my_plugin.h" #include "CImg.h" The plugin contains many method definitions that are used at the c++ code. I also have a makefile that when called from the command line (./make), allows me to compile everything, and generates an executable. I want to import this code into a new Eclipse project, and I do it so: NewProjectC++ projectmakefile projectempty project unmark "Use default location", and select the folder containing my code at the filesystem ProjectpropertiesC/C++ Buildunmark "Use default build command" and set it to use my makefile Also in project propertiesC/C++ GeneralPaths and SymbolsAdd paths to folders containing Eigen and CImg Rebuild index Clean project Restart eclipse When I build the project, eclipse tells me I have more than 1000 errors in "my_plugin.h", but it is capable to generate the executable. Even though, I would like to get rid of this errors, because they are annoying. Also, if I want to open the declaration of CImg methods used at the plugin, I can't. I know it has been asked before, but any of the solutions I found were satisfactory for me (most of them enumerated at the previous list). The sources I visited are the following, and I would be really happy if you find and tell me others I didn't see. Eclipse shows errors but project compile fine eclipse C project shows errors (Symbol could not be resolved) but it compiles Eclipse CDT shows some errors, but the project is successfully built http://www.eclipse.org/forums/index.php/t/247954/

  Read the article

• How to convert many thousands of lines of VBScript to C#?

  - by Ross Patterson

  I have a collection of about 10,000 small VBScript programs (50-100 lines each) and a small collection of larger ones, and I'm looking for a way to convert them to C# without resorting to by-hand transliteration. The programs are automated test cases for a web application, written for HP/Mercury's QuickTest Pro, and I'm trying to turn them into test cases for Selenium. Luckily, the tests appear to be well-written, using a library of building blocks and idioms (the larger programs), so the test cases actually resemble a domain-specific language more than they do VBScript, and the QTP-ness is well-buried inside the libraries. Ideally, what I'm searching for is a tool that can do the syntactic transformation from VBScript to C# for both the dsl-ish test cases and also the more complicated building-block libraries. That would leave me with a manual cleanup of the libraries, and probably very little work on the test cases. If I could find a VBScript-to-VB.NET translator, I'd take that also, as I suspect I could compile the VB.NET and then de-compile to C# using .NET Relector or something similar. Plan B is to write a translator of my own for the test cases, since they're in a very straight-line style, but it wouldn't help with the libraries. Any suyggestions? I haven't written a compiler in at least 15 years, and while I haven't forgotten how, I'm not looking forward to it - least of all for VBScript!

  Read the article

• Why can't I simply copy installed Perl modules to other machines?

  - by pistacchio

  Being very new to Perl but not to dynamic languages, I'm a bit surprised at how not straight forward the manage of modules is. Sure, cpan X does theoretically work, but I'm working on the same project from three different machines and OSs (at work, at home, testing in an external environment). At work (Windows 7) I have problem using cpan because of our firewall that makes ftp unusable At home (Mac OS X) it does work In the external environment (Linux CentOs) it worked after hours because I don't have root access and I had to configure cpan to operate as a non-root user I've tried on another server where I have an access. If the previous external environment is a VPS and so I have a shell access, this other one is a cheap shared hosting where I have no way to install new modules other than the ones pre-installed At the moment I still can't install Template under Windows. I've seen that as an alternative I could compile it and I've also tried ActiveState's PPM but the module is not existent there. Now, my perplexity is about Perl being a dynamic language. I've had all these kind of problems while working, for example, with C where I had to compile all the libraries for all the platform, but I thought that with Perl the approach would have been very similar to Python's or PHP's where in 90% of the cases copying the module in a directory and importing it simply works. So, my question: if Perl's modules are written in Perl, why the copy/paste approach will not work? If some (or some part) of the modules have to be compiled, how to see in CPAN if a module is Perl-only or it relies upon compiled libraries? Isn't there a way to download the module (tar, zip...) and use cpan to deploy it? This would solve my problem under Windows.

  Read the article

• dynamic lib can't find static lib

  - by renyufei

  env: gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) app: Bin(main) calls dynamic lib(testb.so), and testb.so contains a static lib(libtesta.a). file list: main.c test.h a.c b.c then compile as: gcc -o testa.o -c a.c ar -r libtesta.a testa.o gcc -shared -fPIC -o testb.so b.c gcc -o main main.c -L. -ltesta -ldl then compile success, but runs an error: ./main: symbol lookup error: ./testb.so: undefined symbol: print code as follows: test.h #include <stdio.h> #include <stdlib.h> #include <errno.h> #include <string.h> #include <dlfcn.h> int printa(const char *msg); int printb(const char *msg); a.c #include "test.h" int printa(const char *msg) { printf("\tin printa\n"); printf("\t%s\n", msg); } b.c #include "test.h" int printb(const char *msg) { printf("in printb\n"); printa("called by printb\n"); printf("%s\n", msg); } main.c #include "test.h" int main(int argc, char **argv) { void *handle; int (*dfn)(const char *); printf("before dlopen\n"); handle = dlopen("./testb.so", RTLD_LOCAL | RTLD_LAZY); printf("after dlopen\n"); if (handle == NULL) { printf("dlopen fail: [%d][%s][%s]\n", \ errno, strerror(errno), dlerror()); exit(EXIT_FAILURE); } printf("before dlsym\n"); dfn = dlsym(handle, "printb"); printf("after dlsym\n"); if (dfn == NULL) { printf("dlsym fail: [%d][%s][%s]\n", \ errno, strerror(errno), dlerror()); exit(EXIT_FAILURE); } printf("before dfn\n"); dfn("printb func\n"); printf("after dfn\n"); exit(EXIT_SUCCESS); }

  Read the article

• Approach for fixing NoClassDefFoundError?

  - by DJC

  I'm seeing this question is getting asked a lot in many different contexts. Perhaps we can set some strategies for locating and fixing it? I'm noobish myself so all I can contribute are horror stories and questions, sorry... It seems this is thrown when a class is visible at compile time but not at run time... how can this happen? In my case I am developing an app that uses the Google APIs, in Eclipse, for the Android platform. I've configured the Project Properties / Java Build Path / Libraries to include the gdata .jars and all is well. When I execute in the emulator I get a force close and the logcat shows a NoClassDefFoundError on a simple new ContactsService("myApp"); I've also tried a new CalendarService("myApp") with the same results. Is it possible or desirable to statically bind at compile time to avoid the problem? How could dynamic binding of an add-on library work in the mobile environment anyway? Either it has to be bound into my .apk or else I need to "install" it? ... hmmm. Advice much appreciated.

  Read the article

• getting CS1502 compiler error on dev environment but not production.

  - by nw

  When I try to run my ASP.NET app from my development environment I get the following error message: Compiler Error Message: CS1502: The best overloaded method match for 'mmars.Printing.printFunctions.SetPrintSummaryProperties(mmars.contextInfo, ref mmars.Printing.printObjSummary)' has some invalid arguments. When I publish and run on our production server I don't get this error. It seems to compile fine when I build from the build menu (in fact if I change the second argument of the bolded function call below, i get a compiler error in visual studio), but now i've suddenly started getting this error message at runtime. So another question I have in addition to getting rid of the error is why is the .NET development server even trying to do JIT compilation on my project if it is already compiled into a DLL? Printing.printObjSummary myPrintObj = new Printing.printObjSummary(); Printing.printFunctions.SetPrintSummaryProperties(ci, ref myPrintObj); printObjects.Add(myPrintObj); This seems to have just suddenly appeared from nowhere today and it's extremely frustrating. Also, though there are no warnings at compile-time, when I get redirected to the page with that first compilation error there are many warnings like the following: Warning: CS0436: The type 'mmars.MMARSSummaryDataItem' in 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\3dad423c\40569048\App_Code.b0rgpkzr.4.cs' conflicts with the imported type 'mmars.MMARSSummaryDataItem' in 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\3dad423c\40569048\assembly\dl3\7179c19a\345f948c_ece7ca01\mmars.DLL'. Using the type defined in 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\3dad423c\40569048\App_Code.b0rgpkzr.4.cs'. What's the deal with that? Is the webserver complaining about name conflicts in the source file and dll resulting from the source file?

  Read the article

• Cryptic Erlang Errors

  - by Jim

  Okay so I started learning erlang recently but am baffled by the errors it keeps returning. I made a bunch of changes but I keep getting errors. The syntax is correct as far as I can tell but clearly I'm doing something wrong. Have a look... -module(pidprint). -export([start/0]). dostuff([]) - receive begin - io:format("~p~n", [This is a Success]) end. sender([N]) - N ! begin, io:format("~p~n", [N]). start() - StuffPid = spawn(pidprint, dostuff, []), spawn(pidprint, sender, [StuffPid]). Basically I want to compile the script, call start, spawn the "dostuff" process, pass its process identifier to the "sender" process, which then prints it out. Finally I want to send a the atom "begin" to the "dostuff" process using the process identifier initially passed into sender when I spawned it. The errors I keep getting occur when I try to use c() to compile the script. Here they are.. ./pidprint.erl:6: syntax error before: '-' ./pidprint.erl:11: syntax error before: ',' What am I doing wrong?

  Read the article

• Chrome: Dynamically created <style> tag does not have content?

  - by Shizhidi

  Hello. I encountered a weird problem when trying to write a cross-browser script. Basically my header looks like this <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> </head> Then in the body tag: <p id="hey">Hey</p> <input type="button" value="attachStyle" name="attachStyle" onclick="attachStyle();"></input> <script> function attachStyle() { var strVar=""; strVar += "<style type='text\/css'>#hey {border:5px solid red;}<\/script>"; $("head").append(strVar); } </script> The button works in Firefox, but not in Chrome. When I looked at the html DOM elements in the developer tool, the style tag was inserted but without content, like this: <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js"></script> <style type='text/css'></script> </head> I'm curious as to what causes this? And how to create CSS style in a way that is cross-browser? Thanks!

  Read the article

• C# generics when T could be an array

  - by bufferz

  I am writing a C# wrapper for a 3rd party library that reads both single values and arrays from a hardware device, but always returns an object[] array even for one value. This requires repeated calls to object[0] when I'd like the end user to be able to use generics to receive either an array or single value. I want to use generics so the callee can use the wrapper in the following ways: MyWrapper<float> mw = new MyWrapper<float>( ... ); float value = mw.Value; //should return float; MyWrapper<float[]> mw = new MyWrapper<float[]>( ... ); float[] values = mw.Value; //should return float[]; In MyWrapper I have the Value property currently as the following: public T Value { get { if(_wrappedObject.Values.Length > 1) return (T)_wrappedObject.Value; //T could be float[]. this doesn't compile. else return (T)_wrappedObject.Values[0]; //T could be float. this compiles. } } I get a compile error in the first case: Cannot convert type 'object[]' to 'T' If I change MyWrapper.Value to T[] I receive: Cannot convert type 'object[]' to 'T[]' Any ideas of how to achieve my goal? Thanks!

  Read the article

• C++ class is not being included properly.

  - by ravloony

  Hello all, I have a problem which is either something I have completely failed to understand, or very strange. It's probably the first one, but I have spent the whole afternoon googling with no success, so here goes... I have a class called Schedule, which has as a member a vector of Room. However, when I compile using cmake, or even by hand, I get the following: In file included from schedule.cpp:1: schedule.h:13: error: ‘Room’ was not declared in this scope schedule.h:13: error: template argument 1 is invalid schedule.h:13: error: template argument 2 is invalid schedule.cpp: In constructor ‘Schedule::Schedule(int, int, int)’: schedule.cpp:12: error: ‘Room’ was not declared in this scope schedule.cpp:12: error: expected ‘;’ before ‘r’ schedule.cpp:13: error: request for member ‘push_back’ in ‘((Schedule*)this)->Schedule::_sched’, which is of non-class type ‘int’ schedule.cpp:13: error: ‘r’ was not declared in this scope Here are the relevant bits of code: #include <vector> #include "room.h" class Schedule { private: std::vector<Room> _sched; //line 13 int _ndays; int _nrooms; int _ntslots; public: Schedule(); ~Schedule(); Schedule(int nrooms, int ndays, int ntslots); }; Schedule::Schedule(int nrooms, int ndays, int ntslots):_ndays(ndays), _nrooms(nrooms),_ntslots(ntslots) { for (int i=0; i<nrooms;i++) { Room r(ndays,ntslots); _sched.push_back(r); } } In theory, g++ should compile a class before the one that includes it. There are no circular dependencies here, it's all straightforward stuff. I am completely stumped on this one, which is what leads me to believe that I must be missing something. :-D

  Read the article

• Boost Date_Time problem compiling a simple program

  - by Andry

  Hello! I'm writing a very stupid program using Boost Date_Time library. int main(int srgc, char** argv) { using namespace boost::posix_time; date d(2002,Feb,1); //an arbitrary date ptime t1(d, hours(5)+nanosec(100)); //date + time of day offset ptime t2 = t1 - minutes(4)+seconds(2); ptime now = second_clock::local_time(); //use the clock date today = now.date(); //Get the date part out of the time } Well I cannot compile it, compiler does not recognize a type... Well I used many features of Boost libs like serialization and more... I correctly built them and, looking in my /usr/local/lib folder I can see that libboost_date_time.so is there (a good sign which means I was able to build that library) When I compile I write the following: g++ -lboost_date_time main.cpp But the errors it showed me when I specify the lib are the same of those ones where I do not specify any lib. What is this? Anyone knows? The error is main.cpp: In function ‘int main(int, char**)’: main.cpp:9: error: ‘date’ was not declared in this scope main.cpp:9: error: expected ‘;’ before ‘d’ main.cpp:10: error: ‘d’ was not declared in this scope main.cpp:10: error: ‘nanosec’ was not declared in this scope main.cpp:13: error: expected ‘;’ before ‘today’

  Read the article

• Silverlight ClientAccessPolicy issue...I think

  - by Terrence

  Fisrt of all I have my ClientAccessPolicy.xml file in the root of my website. If I access my website using the public domain name like this: h t t p://www.mydomain.com and then go to the page where my SL control is, I get the spinning % numbers up until about 98%, then it quits and my SL control does not appear on the page. If I access my website using the machine name (website is at datacenter, we have vpn setup) like this: h t t p://machinename and then go to the page where my SL control is everything works fine. this must be a ClientAccess Policy issue don't your think? Or what DO you thnik the issue is? Thanks in advance. Here is the contents of my ClientAccessPolicy.xml file: <?xml version="1.0" encoding="utf-8" ?> <access-policy> <cross-domain-access> <policy> <allow-from http-request-headers="*"> <domain uri="*" /> </allow-from> <grant-to> <resource path="/" include-subpaths="true" /> </grant-to> </policy> </cross-domain-access> </access-policy>

  Read the article

• Type result with Ternary operator in C#

  - by Vaccano

  I am trying to use the ternary operator, but I am getting hung up on the type it thinks the result should be. Below is an example that I have contrived to show the issue I am having: class Program { public static void OutputDateTime(DateTime? datetime) { Console.WriteLine(datetime); } public static bool IsDateTimeHappy(DateTime datetime) { if (DateTime.Compare(datetime, DateTime.Parse("1/1")) == 0) return true; return false; } static void Main(string[] args) { DateTime myDateTime = DateTime.Now; OutputDateTime(IsDateTimeHappy(myDateTime) ? null : myDateTime); Console.ReadLine(); ^ } | } | // This line has the compile issue ---------------+ On the line indicated above, I get the following compile error: Type of conditional expression cannot be determined because there is no implicit conversion between '< null ' and 'System.DateTime' I am confused because the parameter is a nullable type (DateTime?). Why does it need to convert at all? If it is null then use that, if it is a date time then use that. I was under the impression that: condition ? first_expression : second_expression; was the same as: if (condition) first_expression; else second_expression; Clearly this is not the case. What is the reasoning behind this? (NOTE: I know that if I make "myDateTime" a nullable DateTime then it will work. But why does it need it? As I stated earlier this is a contrived example. In my real example "myDateTime" is a data mapped value that cannot be made nullable.)

  Read the article

• Endianness and C API's: Specifically OpenSSL.

  - by Hassan Syed

  I have an algorithm that uses the following OpenSSL calls: HMAC_update() / HMAC_final() // ripe160 EVP_CipherUpdate() / EVP_CipherFinal() // cbc_blowfish These algorithm take a unsigned char * into the "plain text". My input data is comes from a C++ std::string::c_str() which originate from a protocol buffer object as a encoded UTF-8 string. UTF-8 strings are meant to be endian neutrial. However I'm a bit paranoid about how OpenSSL may perform operations on the data. My understanding is that encryption algorithms work on 8-bit blocks of data, and if a unsigned char * is used for pointer arithmetic when the operations are performed the algorithms should be endian neutral and I do not need to worry about anything. My uncertainty is compounded by the fact that I am working on a little-endian machine and have never done any real cross-architecture programming. My beliefs/reasoning are/is based on the following two properties std::string (not wstring) internally uses a 8-bit ptr and a the resulting c_str() ptr will itterate the same way regardless of the CPU architecture. Encryption algorithms are either by design, or by implementation, endian neutral. I know the best way to get a definitive answer is to use QEMU and do some cross-platform unit tests (which I plan to do). My question is a request for comments on my reasoning, and perhaps will assist other programmers when faced with similar problems.

  Read the article

• Error while compiling pjsip 2 for cxode 4.3.2 and SDK 5.1

  - by Linus Persson

  I'm trying to compile pjsip version 2 using the terminal and I'm getting constant error no matter what I try. Been looking for the answer all over the internet including stackoverflow. I downloaded pjsip version 2 using their subversion repository today so all files should be up to date. When following this guide: http://trac.pjsip.org/repos/wiki/Getting-Started/iPhone I get this error after running "make dep && make clean && make": ld: symbol(s) not found for architecture armv7 collect2: ld returned 1 exit status make[2]: *** [../bin/pjsua-arm-apple-darwin9] Error 1 make[1]: *** [pjsua] Error 2 make: *** [all] Error 1 When using the above guide combined with this guide: http://lists.pjsip.org/pipermail/pjsip_lists.pjsip.org/2011-October/013481.html I get this error after running "make dep && make clean && make": ld: symbol(s) not found for architecture arm collect2: ld returned 1 exit status make[2]: *** [../bin/pjsua-arm-apple-darwin10] Error 1 make[1]: *** [pjsua] Error 2 make: *** [all] Error 1 I've included /pjlib/include/pj/config_site.h with the following code: #define PJ_CONFIG_IPHONE 1 #include <pj/config_site_sample.h> How do I get pjsip to compile without errors? Please consider that I'm new to this, thank you!

  Read the article

• Why does instanceof seem to work in a static generic function sometimes?

  - by michael

  Greetings. This is my first post in this site. I thought that because of type erasure, one could not expect the following code to compile, and indeed, it did not compile on an earlier version of Eclipse. My understanding was that instanceof was a run-time operator and could not know about the generic type which would be, by run-time, compiled away: public static <E extends Comparable<? super E>> void SampleForQuestion(E e) { if ( !(e instanceof String) ) System.out.println("I am not a String"); else System.out.println("I am a String"); } However, I was surprised to see that one of your threads actually included some code like this in an answer, and my latest Eclipse (Galileo on Windows with JVM 1.6 rev 20) is perfectly happy with it -- and it works, too. (I did notice that someone said it worked on Eclipse but not in another IDE/JDK in that thread, but don't remember the specifics.) Can someone explain why it works, and more importantly, because I have to guide my students, whether it should be expected to work in the future. Thank you. (I hope the code formatting comes through correctly - it looks indented correctly from my perspective and there are no tabs.)

  Read the article

• Linq - How to collect Anonymous Type as Result for a Function

  - by GibboK

  I use c# 4 asp.net and EF 4. I'm precompiling a query, the result should be a collection of Anonymous Type. At the moment I use this code. public static readonly Func<CmsConnectionStringEntityDataModel, string, dynamic> queryContentsList = CompiledQuery.Compile<CmsConnectionStringEntityDataModel, string, dynamic> ( (ctx, TypeContent) => ctx.CmsContents.Where(c => c.TypeContent == TypeContent & c.IsPublished == true & c.IsDeleted == false) .Select(cnt => new { cnt.Title, cnt.TitleUrl, cnt.ContentId, cnt.TypeContent, cnt.Summary } ) .OrderByDescending(c => c.ContentId)); I suspect the RETURN for the FUNCTION Dynamic does not work properly and I get this error Sequence contains more than one element enter code here. I suppose I need to return for my function a Collection of Anonymous Types... Do you have any idea how to do it? What I'm doing wrong? Please post a sample of code thanks! Update: public class ConcTypeContents { public string Title { get; set; } public string TitleUrl { get; set; } public int ContentId { get; set; } public string TypeContent { get; set; } public string Summary { get; set; } } public static readonly Func<CmsConnectionStringEntityDataModel, string, ConcTypeContents> queryContentsList = CompiledQuery.Compile<CmsConnectionStringEntityDataModel, string, ConcTypeContents>( (ctx, TypeContent) => ctx.CmsContents.Where(c => c.TypeContent == TypeContent & c.IsPublished == true & c.IsDeleted == false) .Select(cnt => new ConcTypeContents { cnt.Title, cnt.TitleUrl, cnt.ContentId, cnt.TypeContent, cnt.Summary }).OrderByDescending(c => c.ContentId));

  Read the article

• Alternative to using c:out to prevent XSS

  - by lynxforest

  I'm working on preventing cross site scripting (XSS) in a Java, Spring based, Web application. I have already implemented a servlet filter similar to this example http://greatwebguy.com/programming/java/simple-cross-site-scripting-xss-servlet-filter/ which sanitizes all the input into the application. As an extra security measure I would like to also sanitize all output of the application in all JSPs. I have done some research to see how this could be done and found two complementary options. One of them is the use of Spring's defaultHtmlEscape attribute. This was very easy to implement (a few lines in web.xml), and it works great when your output is going through one of spring's tags (ie: message, or form tags). The other option I have found is to not directly use EL expressions such as ${...} and instead use <c:out value="${...}" /> That second approach works perfectly, however due to the size of the application I am working on (200+ JSP files). It is a very cumbersome task to have to replace all inappropriate uses of EL expressions with the c:out tag. Also it would become a cumbersome task in the future to make sure all developers stick to this convention of using the c:out tag (not to mention, how much more unreadable the code would be). Is there alternative way to escape the output of EL expressions that would require fewer code modifications? Thank you in advance.

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >