Search Results

Search found 4413 results on 177 pages for 'knowledge'.

Page 132/177 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

  • running a laptop continuously

    - by intuited
    I have an experienced laptop — a Dell Latitude D400, with a Pentium M CPU — that I'd like to run as an always-on server. This model was launched in 2004; I got mine second-hand in about 2007. I've heard that continuous operation is generally not a good idea with consumer hardware, but am lacking in specific knowledge about related problems, and have little idea of how much such usage patterns would reduce the lifespan of the machine. I'm mostly concerned with the unit's core components; parts such as the hard drive which are readily replaceable are, well, readily replaceable. What sorts of things can I do to increase the lifespan of this machine under such circumstances? For example, I'm guessing that it would be wise to limit the CPU frequency or take other steps to keep the internal temperature low. However, I'm not sure where the point of diminishing returns would lie with such an approach — 50°C? 40°C? Would it be useful to suspend the machine periodically, for perhaps an hour each day, or a few hours each week?

    Read the article

  • Apache file appearing in directory list, but giving 404 when attempting access?

    - by aayush
    Please forgive my lack of knowledge, this is more of a learning project than anything else. I have a linux box, and it works pretty much fine. When i go to example.com/css it says theres one file in there, bootstrap.min.css When i go to example.com/css/bootstrap.min.css, it gives me a 404 error. I have only one htaccess file to remove the index.php from the url, which also i renamed to htaccess (Instead of .htaccess, so apache wont find it) and i restarted the server, yet no help. I also tried to chmod the css file 755 but no help. Contents of the htaccess file: RewriteEngine On RewriteBase / # Allow any files or directories that exist to be displayed directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?/$1 [L,QSA] Please help, i am very confused about this. I tried to google excessively but i came up with nothing. Edit: I found the solution to be renamed the htaccess file to something entirely different and restarting. Is there any way i can still implement the losing of the .php?

    Read the article

  • Best solution top keep data secure

    - by mrwooster
    What is the simplest and most elegant way of storing a small amount of data in a reasonably secure way? I am not looking for ridiculous levels of advanced encryption (AES-256 is more than enough) and I am only looking to encrypt a small number of files. The files I wish to encrypt are mostly comprised of password lists and SSH keys for servers. Unfortunately it is impossible to keep track of ever changing passwords for my servers (and SSH keys) and so need to keep a list of the passwords. Obviously this list needs to be secure, and also portable (I work from multiple locations). At the moment, I use a 10MB encrypted disk image on my mac (std .dmg AES-256) and just mount it whenever I need access to the data. To my knowledge this is very secure and I am very happy using it. However, the data is not very portable. I would like to be able to access my data from other machines (especially ones running linux), and I am aware that there are quite a few issues trying to mount an encrypted .dmg on linux. An alternative I have considered is to create a tar archive containing the files and use gpg --symmetric to encrypt it, but this is not a very elegant solution as it requires gpg to be installed on every system. So, what over solutions exist, and which ones would you consider to be the most elegant? Ty

    Read the article

  • Strange boot problems on 6 month old setup

    - by Balefire
    I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

    Read the article

  • 3-4 old computers = general purpose cluster?

    - by TheLQ
    I have 3 old computers lying around right now running a P2 at 800 MHz(?), Intel Mobile 1.6 GHz, AMD Athlon XP 2000+ at 1.66 GHz, and (might not use this) P4 at 2.7 GHz, all with 512 MB Ram, and am considering clustering them together for fun/knowledge. They would be running an undecided version of linux, preferably ubuntu based. The issue is what I want to use it for: general computing and occasional video encoding. By general computing I mean day to day tasks. However I'm not sure if every program started by a single X session is going to exist on the same machine, defeating the purpose of such a system. Will programs be split up or exist on one machine? Second, assuming this is running 100baseT ethernet (not sure if the PCI slot itself could handle Gigabit), would the speed of having a program exist over the network be an issue? It seems that the constant asking of various things in RAM would be quite slow. And before you say "buy another computer!", that's not the point of this question. I'm asking would it be usable, not necessarily practical. And yes I know, this is going to be extreamly power consuming.

    Read the article

  • php extensions & apache mods gone/not working after server restart?

    - by user1782359
    I was wondering if anyone has ever come across this before, as I'm pretty stumped to be honest, and my server admin knowledge isn't particular good so I'm not sure what could even be wrong, let alone how to fix it. Basically, Thursday last week everything was fine on our server. I come in on Friday and it's a mess: php extensions are missing/not working, apache modules are gone. (e.g. oci_* was gone completely, odbc_ not working but still there, the apache ntlm_auth for single sign on was gone and so the website wasn't even loading in IE). I'm ruling out anything deliberate because it's just incredibly unlikely. The only thing that really happened between thursday & friday is that on thursday evening one of the network guys did a RAM upgrade on the server and restarted it. That's it, nothing else. Now I'm wondering if somehow those extensions and such which we installed months ago were somehow only saved in a local memory of sorts, and a restart has wiped them? But we installed them all as root, so I don't see why it should be any different from installing anything else. It makes little/no sense to me. To expand on an example of something that's gone very wrong, the php odbc_ extension: It's still on the server, it doesn't return undefined function or anything. But it just cannot connect to the datasource any more. I've tested it through the command line and it's working perfectly fine with that datasource and login details, but all of a sudden having it in the php odbc_connect() function and it just can't connect. ( [S1000][unixODBC][FreeTDS][SQL Server]Unable to connect to data source. ) But unixODBC is set up fine. Like I say i've tested it all through the terminal and it can connect, and we've not changed anything, it's just now all of a sudden not working through the PHP function. Anyone have any ideas whatsoever as to what could be going on? This is on CentOS 5.x by the way.

    Read the article

  • Reverse web proxy with time constraints

    - by user2893458
    I have a web application which produces several unique URLs of the type http://service.company.com/service.html?type=aaaa&key=jfiZm6u6cW where the last part is a randomly generated key. Each such URL provides access to an instance of the service provided. I am looking for a way to restrict access to those URLs based on time constraints, as an example URL#1 should be available between 8:00AM and 10:00AM on May 30, URL#2 should be available between 10:30AM and 12:00PM on May 31, and so on. I already have a resource scheduling application based on Drupal and would like to find a way to include those URLs as scheduled resources. The web application is deployed on Apache Tomcat, so I don't have the knowledge or the resources to alter it, therefore I thought that I could put some sort of reverse proxy in front of the web app that could implement the time constraint feature. In my thoughts the reverse proxy would allow or disallow access to each URL based on the rules that my scheduling application would provide. There may be other ways to deliver such a solution, but I can't think of anything better, so the question is: is there a reverse web proxy architecture that could allow access to the destination URLs based on time and date rules? Any other ideas are more than welcome.

    Read the article

  • Logging communication between two VMs

    - by sYnfo
    Hi, I'm trying to set up "malware lab" described in this paper. So far, I've set up Windows guest system, adding one Host-only Network adapter, and setting this (sorry if the names aren't exactely correct, I don't have an english language version): - IP Address - 10.0.0.3 - Subnet mask - 255.255.255.0 - Default gateway - not set - Preferred DNS - 10.0.0.4 - Alternate DNS - not set And a Linux guest system - Ubuntu 9.04 - with two Network adapters - Bridged (eth0) and Host-only (eth1), and setting eth1 IP Address to 10.0.0.4, leaving the eth0 to be set by DHCP. Then, I have configured iptables as described in the paper, ie.: iptables -F -t nat iptables -F -t mangle iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -A PREROUTING -i eth0 -j ACCEPT iptables -t mangle -A PREROUTING -p udp -i eth1 -d 10.0.0.3 --dport 53 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 --dport 80 -j ACCEPT iptables -t mangle -A PREROUTING -p tcp -i eth1 -d 10.0.0.3 --dport 6000:7000 -j ACCEPT iptables -t mangle -A PREROUTING -i eth1 -j ULOG iptables -t mangle -A PREROUTING -i eth1 -j DROP Now, when I try to ping the windows system from within the Linux system, it does not reply, I guess thats perfectly normal, because iptables is blocking ping responce. Same when I try to ping the Linux system from within the Windows. But when I try to access any web page from within the Windows system, I would expect that this action should get logged by iptables. But thing is, I don't see any of that kind of lines in log file (If I am looking in the right place, that is. :) It is at /var/log/messages, isn't it?). So, what do you think might be the problem here? I should note, that this is the first time I'm using linux, so don't expect ANY working knowledge of Linux at all... :) Also, since english is not my mother tongue, feel free to point out any gramatical mistakes... :) Thanks for any advice.

    Read the article

  • Understanding where an amazon ec2 instance run?

    - by kenzo450D
    I am currently using the aws api from my local desktop. I can successfully take backups of my amazon volumes, and even create an ami from it. Now when i wanted to run the instance to be built from this ami, where does the instance run? In their Elastic Cloud or the computer from which the command was issued. Suppose I want to create the new instance in a new region? (locations as defined in ec2-describe-regions) How would I do that? It seems i have a bad knowledge about how the relation between amazon volumes and instances? Please explain it. I am only allowed to use the CLI tools to do all of my work. I made a new snapshot of the existing instance, made an ami using ec2-register, made a keypair, and then followed these steps, http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/launching-an-instance.html#launching-an-instance-cli but i got an error as this Client.InvalidParameterValue: The requested instance type's architecture (i386) does not match the architecture in the manifest for aki-fc37bacc (x86_64) my local computer is 32bit. But I do not want to load instance on the local computer but on amazon servers?

    Read the article

  • Exchange 2007 Backup - For a newbie

    - by mew3900
    I am trying to setup an exchange 2007 backup solution. After doing a lot of reading, Microsoft have decided in server 2008 unless you are willing to spend a great deal on a 3rd party solution you are pretty stuck! Essentially what I have been asked to do is perform an off-line file backup of our current exchange server and replicate this onto a new 2nd server. The reasoning behind this is that we need to upgrade our current installation of exchange 2007 to SP2 so that the exchange plug-in for windows server backup will be available to us. From this I can then actually take an exchange aware backup weekly and take it off site. Ideally then also we can migrate to this new server and keep the old one as a fail over. Is there a way I can copy across the files required onto a second server, although I doubt very much it is that simple. I may be barking up completely the wrong tree, however I have very limited knowledge with Exchange and any help and advice on how I would resolve this would be much appreciated. Thanks in advance

    Read the article

  • Route all traffic of home network through VPN

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Sizing Switches for Storage and Production

    - by Untalented
    Couple questions. Should you always completely separate the storage network switches from production switches or are VLANs fine to segment this traffic? Is there a golden rule here? How do you properly size a switch for your environment based on the specifications the manufacturer provide (Throughput, Forwarding Throughput, Stacking Throughput, Max Mac)? If you have two switch options and one has a maximum Mac address of 8,000 vs. another with 16,0000. What does this really mean to me? How do make sure one vs. another is sized properly for me? Besides VLAN and Jumbo Frame support, is there any other "Must" haves for a virtual environments production or storage networks? There is a wealth of knowledge on sizing SANs and such, but this seems equally important and it's quite challenging to find as much information. -- Just to add some tidbits of information for the environment. This setup above is referring to the data centers which supports two different locations which have about 100 users between the two in total. The storage traffic will be iSCSI and will be 3 ESXi Hosts and one SAN housing about 2.7TB of data. Since there is currently no storage network in place (no SAN), I'm having a hard time regarding #2 to really determine what backplane throughput and switch specifications will be sufficient.

    Read the article

  • Output current with Teensy++ 2.0 (arduino-based hardware)

    - by omtinez
    I am working on a project with a Teensy++ 2.0 for testing, eventually the goal is to use a Teensy 2.0 (info on both available here) and mount it onto a robot R/C car along with a Raspberry Pi. I have been able to use and test one of the very cheap distance sensors that use ultrasound, which requires very little current. I was trying to power a motor, I don't know exactly what kind of motor but I assume a very low-power one which is what comes with the R/C car cheapo, but nothing is happening. When I plug the motor to GROUND and +5V it runs fine, but when I use GROUND and one of the GPIO pins then nothing happens with the motor. The same GPIO pins were tested to successfully power and run the ultrasound sensor, so the board is fine. My suspicion is that the GPIO pins don't output enough current to power the motor, but my knowledge of electronics is rather scarce (I am a computer scientist, not an electrical engineer). So please forgive me if I am asking something obvious or plain stupid, but does the board not have enough power to power the motor? If so, I could try to use a second power supply that would go straight into the motor and use the GPIO as a gate to turn that power on and off; would such thing work? Is there a better design that could be used?

    Read the article

  • Route all traffic of home network through VPN [migrated]

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Working with an external button box

    - by Scott
    I tried this question on Stack Overflow, but I was pointed here, so here goes: For a new project for myself, I am looking for a way to be able to (for example) open a pop-up window on my laptop, by pressing a button on an external device (to be build by myself, or at least bought) connected with USB. Basically I would be looking at something like a Arduino or Raspberry (IF I am looking in the right direction) with buttons on it, and as soon as I hit a button on the external box with physical buttons, a command activates on my laptop and for example opens a popup window in which I can input tekst. Does anyone know: 1) if it is possible to do this at all. 2) What equipment is needed for the external box, what programming is needed. I preffer .net (dot net) but maybe it can only be done with software from the external box. If anyone can point me in the right direction, like make/model of the external box or websites I would be very happy. I have knowledge of Visual Studio/.net but I am willing to learn other languages if .net is not an option for this project. Thanks in advance Scott PS: If anyone knows of some better tags, or at least knows what I mean and needs me to edit the question, please do tell me... I am new on Stack Overflow/Superuser.

    Read the article

  • vi and emacs: comparison? (not flamebait!)

    - by jared
    So, I've been enjoying learning and using vi for the last couple of years. The beauty of vi, for me, is that its UI is a language of movement and action with a very uniform, simple grammar, and which is terse enough that the requisite memorization pays ample dividends in how much more I enjoy working with text (by avoiding boring repetition and eliminating micro-hassles, like that half-second annoying wait while you scroll down the screen). (Note--I don't claim to have expert knowledge of vi, but I get around decently well: comfortable with limited '@' macros and regexp search-and-replace within files; frequently use multiple buffers, tabs, and windows; get around pretty well in the file browser; understand the grammar of actions + movement + subject (as described so aptly in this beautiful SO answer); and had some pretty sweet debugger and ctags integration going with PHP.) I wonder if some emacs folks could take a swing at explaining what emacs does brilliantly, or sum its strengths up in a phrase or two. Spare me the talk about productivity; I'm more interested in conceptual clarity. Lisp-centric answers are okay; I'm learning Scheme on the weekends, and would pick up emacs for that alone (have been using Racket).

    Read the article

  • Enterprise level Ticketing and inventory system reccomendations [closed]

    - by TrackingSystem
    My company is sort off at a stand still when it comes to our technician ticketing and inventory system. We currently use Numara TrackIt! - which isn't cutting it to say the least. Dell recommended KACE, but it's web based which is what we would like to avoid. We need a good ticketing and inventory system with the following: Server/Client setup Client supports XP/Windows 7 Ent. Web Based as well as Client is a plus Technician ticketing Active Directory integration Inventory System (Asset tag tracking etc/PO tracking) Exchange integrated - when tickets are made you have an option to send to the requester. Something that will scale well Please, if anyone is a Systems Admin or has knowledge regarding use of a great ticketing system please let me know. We have a large international corporation - price honestly isn't an issue. Keep in mind this will be mainly used for technicians to create tickets, enter inventory(track PCS) and possible even an option to track purchase orders. We want an enterprise level ticketing system with these capabilities please help! Thank you.

    Read the article

  • php mail() function painfully slow on local development machine

    - by Michael B
    Background: If you have set up a local apache server for development purposes you may have run into the problem where sendmail takes a long time (at least one minute) to send emails. This is extremely frustrating if you are trying to debug a problem with an email you have generated. There are several forum posts on the internet that discuss this problem. However, none of theme described what to do in enough detail for my limited knowledge. Here are the steps that worked for me: 1) find your hostname (in case you've forgotten it) using this command: :~$ cat /hosts/hostname myhostname 2) edit the file /etc/hosts and make sure the first line is the following: 127.0.0.1 localhost.localdomain localhost myhostname 3) edit the sendmail configuration file ( /etc/mail/sendmail.cf in Ubuntu) and Uncomment the line #O HostsFile=/etc/hosts 4) Restart the computer. The computer should boot up much faster now and the mail() function should return almost immediately. HOWEVER, the emails won't actually be sent unless you follow step 5. 5) You must new use the sendmail '-f' option whenever using the mail function. For example: mail('[email protected]', 'the subject', 'the message', null, '[email protected]'); My question for my fellow serverfaulters is: What further changes can be made so that I don't have to use the sendmail -f option? Although it's not very hard to add the -f option, it is a problem when your CMS (such as Drupal) does not use the -f option when sending mail. You would need to hack a core module to add this option.

    Read the article

  • ZFS Data Loss Scenarios

    - by Obtuse
    I'm looking toward building a largish ZFS Pool (150TB+), and I'd like to hear people experiences about data loss scenarios due to failed hardware, in particular, distinguishing between instances where just some data is lost vs. the whole filesystem (of if there even is such a distinction in ZFS). For example: let's say a vdev is lost due to a failure like an external drive enclosure losing power, or a controller card failing. From what I've read the pool should go into a faulted mode, but if the vdev is returned the pool should recover? or not? or if the vdev is partially damaged, does one lose the whole pool, some files, etc.? What happens if a ZIL device fails? Or just one of several ZILs? Truly any and all anecdotes or hypothetical scenarios backed by deep technical knowledge are appreciated! Thanks! Update: We're doing this on the cheap since we are a small business (9 people or so) but we generate a fair amount of imaging data. The data is mostly smallish files, by my count about 500k files per TB. The data is important but not uber-critical. We are planning to use the ZFS pool to mirror 48TB "live" data array (in use for 3 years or so), and use the the rest of the storage for 'archived' data. The pool will be shared using NFS. The rack is supposedly on a building backup generator line, and we have two APC UPSes capable of powering the rack at full load for 5 mins or so.

    Read the article

  • oracle access on vmware fusion

    - by gaudi_br
    Hello, I'm running snow leopard and I'm doing some development that requires some network knowledge. I've installed vmware fusion 3.0 and I've set up a virtual machine with windows 2003 server. I need to mimic the exact configuration of another server in the network, so I really need to run the versions I'll be mentioning here. Besides, I set up two network configurations on the VM: one NAT config (so that I can have internet access) and one host-only config (because I need to use another server's mac adress and my local area network might have a problem with it) From the installation of windows 2003, I then installed oracle 10.2.0.1. During the installation I received a warning about the primary ip-address of the system being dhcp assigned, but I ignored it (maybe it was a mistake)... Now, from experience, unless the DHCP assigned address changes, I should be able to access the guest system's database from the host system, so I went to safari and tried to access the oracle em. As it turns out, because my computer is on a company network, the company's DNS doesn't know about the virtual machine, unless of course I switch to a bridged network config. However, I don't want to do that because I don't to mix up the domains. So I guess the question is, how can I define my own dns or router, or whatever it is that I need to define so that whenever I try the guest system's ip address form the host, it will use the vmnet1 or vmnet8 interface define by vmware and bypass the dns configuration of my local area network. I'd also like to know what to do incase I want to change ip addresses on the guest machine without having oracle go haywire (I've noticed a few folders on the structure which are specific for the very first IP Address)... Any help would be appreciated. Thanks in advance.

    Read the article

  • Set up layer 2 vlan between 2 data centres

    - by user41679
    Hello, Our data centre provider operates 2 sites, and we currently have equipment in one and would like to have equipment in the second. They've told me that they operate a layer 2 vlan between the 2 sites over a 20gbit connection, and that they'd just give me ethernet cable at each end to connect the locations. At the current site, we have Cisco 2960 48TC-L switches, all the machines are on a 192.168.x.x subnet and we have cisco firewalls with which we connect to our internet provider with. My question is what would I need to do to connect the 2 sites? could I just plug the ethernet cables the provide into the cisco switches, and have the same switches the other end? would I need to set up a separate internal network on the other side and connect both through the firewalls? Would the cisco switches need special configuration? We expect to maintain a number of connections between the 2 sites, and each site would have its own internal dns name like dc1.xx.com. Sorry if I'm being vague or haven't included enough information, I've a fairly good knowledge of hardware but we're down a netops guy at the moment and I'd like to get both sites on-line ASAP! Thanks in advance!

    Read the article

  • Show (copy) data at "X" time and stop update

    - by Anka
    I have two sheets. In the first sheet, cell F4, I have 00:00:00 (countdown). G9, G10 and G11 are cells that receive live data (decimal numbers). In the second sheet, I have three cells linked from sheet1, G9 ='Sheet1'!G9, G10 ='Sheet1'!G10, G11 ='Sheet1'!G11 (which update themselves when data is modified in the first sheet). Now I want to set in sheet 2, (assume) cells B9, B10 and B11 to show me (copy) the values from G9, G10 and G11 from sheet 1 when the countdown was 00:00:05 (5 seconds before Start) and not update again if the data changes in the cell it pulled the data from. Like G9 ='Sheet1'!G9 at 00:00:05 and stop here, do not update anything. OK? I can do a part, but the real problem is: I can not make it stop cells to update. Stand frozen, freeze, not move, calm .. however. I do not want to seem pretentious (but my knowledge in excel is limited), the most appropriate would be a formula, not macro or VBA, if possible. I want to post a picture but I can not because of my restrictions. Well, if this is not possible with a formula is just fine with (not really) VBA.

    Read the article

  • How to route 1 VPN through another on OS X?

    - by Eeep
    Hi everyone. Thanks a lot for your help! I've been tinkering with this for a while and have read many posts along with Googling for help, but my knowledge of TCP/IP is really weak... I have access to two different VPN servers. 1 Is set up in Network Settings and connects through PPP 2 Is set up through Tunnelblick and uses OpenVPN. I can connect to either tunnel #1 or tunnel #2, but not both one after the other... One of my major to-do's this year is study TCP/IP, but for now, would you be super-helpful and help me fix this really clearly? I have no experience with routing, DNS, gateways or any of that. If you tell me, "Set your gateway to XXX.XXX.XX.XXX" can you specify how I get that IP, off of what interface so I don't get messed up? I can figure out the terminal just fine if you let me know what to type, and I WILL read the man pages on everything you help me with. Thanks a million!

    Read the article

  • My Ubuntu 10.04 server kills all WAN bandwidth when it's attached to my LAN. Where do you begin troubleshooting?

    - by rrc7cz
    First I should say that my Linux knowledge is minimal; just enough to set up some servers (Apache, Tomcat, Couch, etc). I built a MiniITX server to host some simple sites, act as an SSH tunnel while I'm away, and act as a torrent server. It was not properly secured for a long time (iptables was empty, all ports open, no firewall) though my router did not have much port forwarding set up beyond HTTP, FTP, and SSH. A week or two ago my bandwidth at home dropped from around 27Mbps to 2Mbps and my upload went from 7Mbps to 0.06Mbps. When I unplug the server from the LAN, by bandwidth shoots back up. I threw up a restrictive iptables, removed most of the port forwarding, and checked my router logs to see if there were any open connections from the server (malware?) but there were none. What would you do? What are the first things you'd check? I can of course reinstall everything from scratch, but I'd like to find the root cause.

    Read the article

  • Two video card on one Mobo

    - by InfinityKing
    I recently purchased a new HP Pavilion p6-2265eo. It was then that I realised that it has only one DVI and one HDMI output.. I will connect my TV with the HDMI. so I am letft with only one DVI output. I need to have two monitors. Please help. Should I purchase a new video card and install it? My knowledge is limited. The specifications of my comp says that there is 1 x PCI-E x16, 3 x PCI-E x1. 1) I suppose that the video card already present in my purchase is connected on the PCI-E x16. Am I right? I dont want to open my desktop right now and check it for myself as it can void the warrenty. so I need an experienced person to tell me that. 2) I have an old nvidia geforce 7200 gt. Is it possible for me to connect it to my left over PCI-E x1? I searched for PCI-E x1 on the net and as far as I can understand the slot is too small for my old nvidia geforce 7200 gt graphic card. 3) what are the options? Please help this dummo :) Thankign you in advance,

    Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >