Search Results

Search found 5878 results on 236 pages for 'sim card'.

Page 132/236 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• NVIDIA 560 TI driver install ubuntu 14.04 leads to "missing on display" error

  - by allthosemiles

  Currently on my Ubuntu 14.04 install, I boot it up install the latest updates and attempt to install the NVIDIA drivers from xorg-edgers while following the top answer on this post Installing Nvidia Drivers It installs 304 for my card and when I check the "glxinfo | grep OpenGL" I have about 8 lines that read Xlib: extension "NV-GLX" missing on display ":0". I did the "sudo apt-get install nvidia-current" to get the latest. I install it but didn't see any errors in the terminal. I'm not sure what I'm doing wrong here. I'm not a complete beginner with Linux so I can find my way around just fine but I can't find a solution to this issue. Should I have done one of these two instead? sudo apt-get install nvidia-304 sudo apt-get install nvidia-graphics-drivers-304

  Read the article

• Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work

  - by Victor S

  I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work. This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working. Updated My video card info: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fbee0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon

  Read the article

• Video Freezes Every few seconds

  - by Chandan

  Hi, I have problems playing videos on my Ubuntu 10.10 machine. The video FREEZES every 20-25 seconds, while I could still hear the audio. I use Totem Movie Player (GStreamer) & have nVidia on-board graphics card & AMD DualCore processor. After some 5-10 seconds, the videos resumes skipping the hung portion. But, I can hear the audio of that part! I've tried it with SMPlayer (GUI), VLC & Kaffeine. But, the same problem... I recently uninstalled the nVidia drivers and since then, not even for a second, no video hung! So, I thought its the problem with the proprietary nVidia drivers. But, since its uninstalled, I'm not able to get the desired desktop resolution & effects. So, is there any way I can work it out?

  Read the article

• How can I remove the security/malicious user warning from my website?

  - by BigBoy1337

  I have a domain name tradespring.net, and www.tradespring.net that redirect to my heroku app with a CNAME record. However when I first try to access these sites it gives me a malicious warning This is probably not the site you are looking for! blah blah blah then "proceed anyways" or "back to safety" Its because my browser realizes that it is redirecting. How can I make sure anyones browser (not just my browser) trusts this site and my heroku app? I dont think i need an SSL certificate because this site is not sending sensitive info (credit card info, ect.).

  Read the article

• How do I get wireless to work on a Dell Mini 1018 with Realtek RTL 8188CE Network Adapter?

  - by Laurence Nagel

  My Dell Mini 1018 used to work fine with Ubuntu 12.04 with no problems connecting with the wireless card. Then I made the big mistake of attempting to disable WiFi by right-clicking on the wireless applet and un-checking "Enable Wireless." Since then, I cannot get wireless working again. The wireless applet reports that "wireless is disabled by hardware switch" but there is no hardware switch on this computer. Issuing a rfkill list yields the following: 0: dell-wifi: Wireless LAN Soft blocked: yes Hard block: yes 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I'm in way over my head, and my computer is now useless. Help!!!

  Read the article

• Payback Is The Coupon King

  - by Troy Kitch

  PAYBACK GmbH operates the largest marketing and couponing platforms in the world—with more than 50 million subscribers in Germany, Poland, India, Italy, and Mexico.  The Security Challenge Payback handles millions of requests for customer loyalty coupons and card-related transactions per day under tight latency constraints—with up to 1,000 attributes or more for each PAYBACK subscriber. Among the many challenges they solved using Oracle, they had to ensure that storage of sensitive data complied with the company’s stringent privacy standards aimed at protecting customer and purchase information from unintended disclosure. Oracle Advanced Security The company deployed Oracle Advanced Security to achieve reliable, cost-effective data protection for back-up files and gain the ability to transparently encrypt data transfers. By using Oracle Advanced Security, organizations can comply with privacy and regulatory mandates that require encrypting and redacting (display masking) application data, such as credit cards, social security numbers, or personally identifiable information (PII). Learn more about how PAYBACK uses Oracle.

  Read the article

• KDE Sometimes Glitches On Wakeup

  - by Mew

  Well, a picture is work 1k words: Looks bad, huh? I am using the 331-updates latest 331.67 drivers from NVidia's website on a Dell Latitude e6400. Everything else is up-to-date. This only happens when I resume from sleep, or I switch to a VT and back. It also doesn't ALWAYS happen, which I find odd. Graphics Card: Nvidia Quadro NVS160M UPDATE AFTER TESTING: This problem only exists with KDE (specifically QT). I can go into Unity or Mint or any non QT-based GUI and it works perfectly with no resume errors. UPDATE: This only happens when I use KWin (and KDE). I have upgraded to 14.04 and the problem is not occurring as frequently. Also, sometimes this effect doesn't happen, but instead the top menu bar simply goes out of focus with the rest of the screen goes blank.

  Read the article

• kubuntu - what's the best smplayer configuration for best quality in hd movies (mkv)

  - by Frank

  I have ubuntu x64 13.04 with kde 4.11 and smplayer v0.8.6 and the last mplayer version from ppa. I have ATI video card HD6870 MSI with fglrx driver v13.4. My kde settings are: Composition mode: Opengl 3.1 graphic system qt: Raster scaling mode: precise Vsync: auto So what's the best configuration for quality over performace in smplayer according to my system specs? For example what do I have to set for the following options? enable postprocessing by default and postprocessing quality output driver Deinterlacing method software equalizer direct rendering double buffering draw video using slices threads for decoding (MPEG-1/2 and H.264 only loop filter use CoreAVC Thanks

  Read the article

• Where are the LXDE sound preferences?

  - by Uri Herrera

  I'm confused,how can I change the sound output in LXDE? There's not even a single option anywhere unlike other environments. I've tried doing anything with alsamixerbut still nothing, the output device is the HDMI audio of a Radeon HD card. Edit: As it Turns out i was able to change the ouput device, but i had to use Gnome for that and its Gnome Sound applet, that is log out and log in in Gnome change the device, log out and log back in LXDE. Now the question becomes Why can't i do this in LXDE?

  Read the article

• Virtualbox will run from 32bit installation CD but not 64bit.

  - by MetaDark

  I am trying to set up Windows in Virtual Box, so I don't need to reboot in the rare occasion that I actually need it. The problem is, Virtual Box doesn't preform any errors when I insert the 32bit installation CD but when I try to use the 64bit installation; What!? I am already using the installation disc! I've checked my BIOS to see if I have SVM (AMD's version of VT) disabled and all I see is "Enabled" I have a K9N6PGM2-V2 motherboard A Triple Core AMD Athlon II A Nvdia NForce 430 integrated graphics card 4GB of RAM An 80GB IDE And a 1TB SATA I don't think the last three specifications matter but just in case XP I am pretty sure the CD isn't broken ( I am going to make sure in just a moment ), what could be the cause to this problem? Edit: The 64bit installation CD is not broken, but I found out when trying to install from the 32bit version that it's trying to upgrade, not preform a fresh install - Odd.

  Read the article

• Remove Duplicate Second Unity Launcher on Dual Screen

  - by Eugene van der Merwe

  See attached image. On my dual screen display I have a Unity Launcher on the left hand screen and also on the right hand screen. Both work perfectly fine. I don't want two Unity Launchers. Every time I move my house to the right hand side it gets slowed down over the right launcher hampering my productivity. I have an Nvidia card with the Nvidia driver and I am using TwinView. Could somebody please tell me how to remove this extra duplicated launcher?

  Read the article

• Are there any good music mixers available, equivalent to Windows "MP3 Tunes"?

  - by RobinJ

  In Windows my dad used to have a program called MP3 Tunes. I have tried running it with Wine, and it worked. But strange things kept happening to the program, so it's not a reliable way to play music. Basically I just want to have 2 players (in a single window) with these features: Preloading tracks in a player without immediately starting them. Fading from one track to the other. A timer on each player. These features are also desired, but not required: Microphone input. Prelistening before loading a song in a player (through a seperate sound card). Pitch/Tempo control. Just being able to browse folders in the filesystem (without things like a music library). Here are some screenshots of the program to clarify what I'm looking for:

  Read the article

• Few problems on Dell xps 15 L502 (screen brightness ,blutooth,wi-fi power management problems)

  - by Web-E

  I am running ubuntu 11.10 32bit in my dell xps L502. Working good except few problems. Blue tooth always turned on reboot,I would like to turn it off always. Screen brightness is not saved.Every time I reboot, the screen goes back to full brightness.How to save that? and the most important problem is internet speed through wi-fi is really very slow when operating on battery.the card is intel centrino Advanced-N 1030 with integrated blue tooth. Any help will be appriciated... :)

  Read the article

• HP Pavilion g6 1190sm laptop has overheat/hibernation/graphics issues

  - by Jan

  Every time I reboot or shutdown my laptop, while the laptop is booting again I get a screen (before loading the OS) that HP discovered overheating and system went into hibernation. But the point is that the laptop is not overheating nor going into hibernation by itself. Also, because of the hybrid graphics card I cannot install additional drivers. Desktop resolution and all works perfectly but I cannot use Unity 3D. Also, OpenGL doesn't work as it should (with Cairo Dock). As I've read some posts, people say that vgaswitcheroo doesn't work on 12.04 so I haven't tried it.

  Read the article

• How to stop fan running always on Asus P8P67LE motherboard with ATI Radeon HD6900

  - by Chris Good

  I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

  Read the article

• JavaOne San Francisco 2013 Content Catalog Live!

  - by Yolande Poirier

  There will be over 500 technical sessions, BOFs, tutorials, and hands-on labs offered. Note that "Securing Java" is a new track this year. The tracks are:  Client and Embedded Development with JavaFX Core Java Platform Edge Computing with Java in Embedded, Smart Card, and IoT Applications Emerging Languages on the Java Virtual Machine Securing Java Java Development Tools and Techniques Java EE Web Profile and Platform Technologies Java Web Services and the Cloud In the Content Catalog you can search on tracks, session types, session categories, keywords, and tags. Or, you can search for your favorite speakers to see what they’re presenting this year. And, directly from the catalog, you can share sessions you’re interested in with friends and colleagues through a broad array of social media channels. Start checking out JavaOne content now to plan your week at the conference. Then, you’ll be ready to sign up for all of your sessions when the scheduling tool goes live.

  Read the article

• Ubuntu 12.04 "Do nothing" when "lid closed" blanks out external monitor

  - by Elijah Lynn

  This is not the same as this question. I have Ubuntu 12.04 running with an Nvidia card on a W510 Thinkpad. I have one external monitor connected. When I change the power settings to "Do nothing" when "Lid closed" it still keeps the system running which is great. However, it blanks out the display on any external monitors making the system useless. I plan on getting a dock soon and having to identical resolution monitors and would love to be able to dock the monitor and work as normal on the external monitors. Does anyone have a suggestion or fix for this? Should I report this as a bug or feature request?

  Read the article

• Best open source ASP.NET MVC e-commerce projects

  - by Øyvind Knobloch-Bråthen

  I need to get a e-commerce site up and running, but I really don't want to program it from the bottom up if I don't need to. I want to program it using ASP.NET MVC. I'm looking for a good open source alternative (or one for purchase if it's modular enough) that I can use as a base and enhance with the needed functions? It has to have all "normal" e-commerce functions, and also the possibility to integrate with a credit card API of my choice. If anyone have any recommendations for me here, I would appreciate it :)

  Read the article

• Sound plays from laptop speakers only even when headphones are connected

  - by Ankush N Nayak

  I'm using a Dell Vostro 1014 laptop with Ubuntu 11.10. From the time I had Ubuntu 9.04, sound comes from the laptop speakers only even when I plug in earphones or external speakers. Also, if an external microphone plugged in, it does not work. Dell even replaced my motherboard to check for hardware issues but the problem persists. So it is definitely not a hardware issue. The sound plays perfectly through the headphones in the pre-boot diagnostics. So I figure, this must be a problem with Ubuntu not recognizing my sound card. Please try to give a solution for this problem.

  Read the article

• Get Hands On with Raspberry Pi via Free OS-Building Course

  - by Jason Fitzpatrick

  Cambridge University is now offering a free 12-segment course that will guide you through building an OS from scratch for the tiny Raspberry Pi development board–learn the ins and outs of basic OS design on the cheap. You’ll need a Raspberry Pi board, a computer running Windows, OS X, or Linux, and an SD card, as well as a small amount of free software. The 12-part tutorial starts you off with basic OS theory and then walks you through basic control of the board, graphics manipulation, and, finally, creating a command line interface for your new operating system. Hit up the link below to read more and check out the lessons. Baking Pi – Operating Systems Development HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

  Read the article

• combo microphone does not work on Natty.

  - by Senthil Kumaran

  I have a Internal Audio Hardware card and my Laptop (Lenevo IdeaPad) presents a single slot as a combo Microphone and headphone jack. On Windows, I attach my ipod headphone to jack and speak directly to my computer. I assume there is a microphone which is listening to my voice and I can communicate two-way. On Ubuntu, the microphone always seem to be listening to random noise. So any input by speaking to the computer is not possible. What could be the reason and how do I troubleshoot this?

  Read the article

• Ubuntu 12.10 AMD/Intel Hybrid Graphics not working

  - by Marian Lux

  On Ubuntu 12.04 my Sony Vaio VPCSE with Intel® HD Graphics 3000 and AMD Radeon™ HD 6630M worked fine with the Catalyst Control Center version 12.6. Also the switching between integrated and discrete graphic card was working. In both cases, I followed this tutorial. But it is not working on Ubuntu 12.10. I tested the tutorial with the Catalyst Control Center from the Ubuntu Software Center, the version 12.8 and version 12.9. Always the same problem: After installation process I am able to boot in the login-screen. But after entering the password for my username, only the background-image appears. Unity seems not to be starting. I am only able to reach the context-menu by right clicking the mouse button. I also tried his fix, but is also does not work for me. Any ideas what to do to fix this problem?

  Read the article

• The death of Kodak digital

  - by Ken Hortsch

  Months ago Kodak announced that it was discontinuing its digital video to focus on “significant opportunities for profitable growth”.  Three years ago I picked up the little Kodak Zi6 (pronounced Zix) for the kids for Christmas.  It is an HD pocket video camera with a nice 3” LCD all built into a something a bit longer than an deck of cards.  It is low tech and great!  The kids have had a ball with it, and for around $100 it was perfect.  It comes with 2 AA rechargeable batteries and the recharger.  You can add an SD card, but don’t need to, and the USB is not a cable but a pop-out dongle so everything is right in the one package.  Too many companies look for the next big thing and fail to see the stuff that is good enough, and right in front of their eyes.

  Read the article

• 12.04 Dual Monitor Configuration changes to "Mirrored" automatically

  - by Josef

  After installing 12.04 on my Samsung X120 Notebook (with Intel GMA 4500 internal graphics card) i have a Problem with the configuration off my 2nd monitor. Its a 22" with 1680 * 1050 Pixel connected via HDMI. I use the display configuration and set internal display=off and external display=main display. That works fine. After rebooting i still have that configuration, but after a while (often when i press a button on the keyboard), the configuration automatically changes to "Mirror Screen" and the internal display switches on. Both displays then have a bad resolution. When i do the manual display configuration again, everything is fine for the duration of that session. What could be the problem, that this display configuration gets lost / resets?

  Read the article

• Grub-Efi wrong resolution

  - by Nikki Kononov

  My question, as it comes from the title, related to grub, but it's a different thing. I re-installed Windows 7 and Ubuntu 12.10 in UEFI mode (before that I was using normal BIOS) and everything went perfectly fine. Both systems load as they should but there is one thing that keeps bothering me. The problem is before I installed both systems in UEFI I used to boot in both system using common grub (non-uefi) and resolution in this grub was correct (which is 1366x768). Right now with grub-efi I have wrong resolution (which is seems to be 640x480). So my question is can can I safely set grub-resolution using grub config files or issue is related to something else? (for instance graphics card). I am using Ubuntu 12.10 Intel HD 3000 + Nvidia GT 540M Optimus (I am using bumblebee) Kernel 3.5.0-19-generic all updates installed! I also added ubuntu x-swat ppa for drivers. Thank you for your help!

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >