Search Results

Search found 55692 results on 2228 pages for 'error logging'.

Page 133/2228 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

  • Wubi shows error

    - by Quirk
    I tried installing Ubuntu 12.04 using Wubi and it just doesn't work, every time, without fail. I had the following scenarios: 1. I downloaded only wubi.exe and ran it. The wubi installer started downloading the amd64.iso using torrent. But when there were just about 40 secs left to download, it shows an error 404: File not found. 2. I downloaded the iso file seperately and put it in the same folder as the wubi.exe. Now there are two cases: a. Offline: wubi says it could not download the metalinks file and hence cannot download the iso. So I download the meta files separately and place them in the same directory. wubi shows the same error again. b. Online: wubi works in same way as in case 1. and the same problem occurs as in case 1. In short wubi doesn't recognize the already downloaded iso in the directory at all. 3. I burn the iso into a Cd and run it. The same thing occurs as in Case 2. Just in case that you know, I installed SP3 for win XP just before using wubi. While Windows is running alright, is it possible that its causing conflicts for wubi?

    Read the article

  • "Failed to create swap space" error during installation

    - by Welsh Heron
    I've been trying to install Ubuntu for the past two days or so, but I've been running into a problem: every time I run the installation program on the LiveCD, I always get the same (or a very similar) error: "Failed to create Swap space The creation of swap space in partition #3 of SCSI5 (0,0,0)(sda) failed." So far, I've run DBAN (Darik's Boot and Nuke) on my HDD once, to make absolutely sure that everything on it had been erased. Then, I simply put in the LiveCD, and let it run the automated install. I get the above error directly after I tell it to automatically partition the HDD (it will work for a second or so, then this will pop up), forcing me back to the screen that lets me choose whether I want to automatically or manually partition the HDD. Well, after failing to install the software manually, I did a little research and learned enough about partitioning Linux to use the 'Manual partitioning' option. I partitioned the HDD as follows (it's a 1TB drive): /home - (the rest)- ext2, / - 20GB - ext2, /boot - 100MB - ext2, /swap - 8GB /EFIboot - 40MB The only difference when I tried this method was that I got THIS message: "Failed to create Swap space The creation of swap space in partition #2 of SCSI5 (0,0,0)(sda) failed." Basically, the only difference was that there was now a '2' instead of a '3'. If I may ask, what exactly am I doing wrong? I've tried looking around the internet (that's basically all I've done for the last two days), but no one seems to have the same problem that I have, and I've tried most of the solutions for similar problems (DBAN, formatting partitions in ext2 format, etc). The only thing I haven't tried is using the terminal to manually partition the HDD...and I actually DID try to do this, but I wasn't able to get past 'su' 's password demand, so I wasn't able to use the terminal. Thank you for your help in advance. ~Welsh

    Read the article

  • Ubuntu 12.04 LTS: Error message "Failed to execute child process"

    - by Ron
    I am an Ubuntu-newbie and just started working with Ubuntu (version 12.04 LTS) a couple of days ago. I wanted to add a launcher icon to desktop for launching an application I previously installed. Up to now I can only launch it by typing setsid matlab -desktop into my terminal. Now there is the following problem with the execution via the desktop icon: Whenever I click the desktop icon, I get the following error message: "Failed to execute child process" I would like to add a screenshot, but unfortunately as a new user, I am not allowed to... In the main menu from where I added the icon via drag'n'drop to desktop there is also a permission to execute the .desktop file. I also tried to look for advice on the error message "Failed to execute child process..." but could not find anything useful. Now does anybody have an idea what I am missing? Sorry if this is a stupid question ;) ...but as I just said: I just started with Ubuntu... Thanks to everybody in advance for their help! :) And let me know if you should need any more information... Regards, Ron

    Read the article

  • Unknown filesystem error

    - by Ben
    My computer has (had) a dual boot of Ubuntu Precise and Windows 7. Recently, when I started the computer, grub gave me an error saying "Unknown filesystem", and sent me to grub rescue. I searched for solutions to this, and found this answer: Unknown filesystem error: grub rescue. I followed the instructions there, but they didn't really help: when I restarted the computer, it went straight to Windows without grub intervening at all (so it boots successfully, just not to the OS I want). This is the log from boot-repair. My Ubuntu partition is sda6. Naturally, I'm a little worried, since the log says "unknown filesystem type ''", which to me looks like the partition might be corrupt somehow. From the Ubuntu Live CD, I started gparted and looked at my partitions, and it also told me that my sda6 is an unknown filesystem. So my questions are basically: Can I restore Ubuntu to the way it was? If not, can I at least rescue the data I had on the partition somehow? Again, if I can't restore Ubuntu, how do I clean everything up so that I can reinstall it without too many complications? Another thing I should mention is that yesterday I had a similar problem where the computer told me there was a problem with the hard drive when it was starting, but it fixed itself by running fsck (that time it got past grub, and managed to start Ubuntu). Between that occasion and me having trouble booting the computer today, I have booted it successfully at least twice. Thanks for any help!

    Read the article

  • Error message when running OpenGL programs with bumblebee

    - by user170860
    X Error of failed request: BadDrawable (invalid Pixmap or Window parameter) Major opcode of failed request: 152 (DRI2) Minor opcode of failed request: 8 (DRI2SwapBuffers ) Resource id in failed request: 0x4200005 Serial number of failed request: 2166 Current serial number in output stream: 2167 primus: warning: timeout waiting for display worker Segmentation fault (core dumped) I don't get this on all OGL programs, but only particularly GPU intense ones. Also, I only get this using primusrun. optirun gives the same error no matter what I run: [VGL] NOTICE: Pixel format of 2D X server does not match pixel format of [VGL] Pbuffer. Disabling PBO readback. I don't know what either of these mean. Neither of them stop the programs from running, but I'd like to fix the problem if there is one. Also, I prefer to use primusrun because it is faster and it does a better job with vertical sync, however, it only supports OGL 4.2. This isn't a big issue because the programs I write are forward compatible, but it still seems odd to me. So basically I'd just like it if someone could explain to me what is happening and if there is something I can do about it. Thanks.

    Read the article

  • Unable to boot Windows after installing Ubuntu 12.04 - error: invalid efi file path

    - by user113350
    I have a Laptop (ASUS X310A, I installed Ubuntu 12.04 to be side by side with Windows 7 but I seem to have gotten a problem with booting Windows 7. I used the Boot Repair twice with no results. Boot-Repair info: http://paste.ubuntu.com/1417623/ The error I get when starting Windows 7 from GRUB is: error: invalid efi file path In Boot Manager or Menu, I have 3 options now: 2x for Ubuntu (maybe cause I did boot-repair twice) 1x Windows boot manager (If I boot this it opens "ASUS Preload Wizard", it gives me the option to re-install windows losing all previous data -) When I was making the partition before installing Ubuntu, I made the new partition by making sda4 smaller and adding ext4 mounted: "\" and adding a swap area. Installed it and it didn't work, nothing worked. So i booted Ubuntu from the USB again and deleted the partitions I made and decided to make sda3 smaller and making the partitions but this time it gave me the option that I could mount sda3 on "\windows" or "\dos" I ignored it and didn't choose neither because the I know that it doesn't need to be mounted and proceeded to create what is now sda7 (ext4) and sda8 (swap area). It still didn't work so I booted from USB and did the first boot-repair, so I was able to boot Ubuntu now but not windows, but when I did it through my USB I was not able to update boot-repair, so i decided to redo the boot-repair from Ubuntu running on the Hardisk (fully updated) and it still didn't work. In GRUB this is what i see (when booting using Ubuntu as first option in Boot Menu): Ubuntu, with Linux 3.2.0-29-generic Ubuntu, with Linux 3.2.0-29-generic (recovery mode) Windows UEFI loader Windows Boot UEFI bootx64.efi.bkp Windows 7 (loader) (on /dev/sda3) Windows Recovery Environment (loader) (on /dev/sda5) I tried all the ones starting with "Windows" they all don't work Please help, Many Thanks

    Read the article

  • Cannot mount USB drive -- FSTAB error

    - by user107646
    Recently, one of my desktops seems to have developed a problem with the fstab and mounting USB drives. The specific error I receive is... Unable to mount TRAVELDRIVE Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at http://tuxera.com/community/ntfs-3g-faq/#unprivileged The contents of my fstab are... /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sdc1 : UUID=7e3431cd-522f-4e35-b286-4300fa702d4a / ext4 errors=remount-ro 0 1 #Entry for /dev/sda1 : UUID=60684D08684CDE82 /media/Archive ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdc5 : UUID=cd166221-4b1d-40f7-b9de-785208990587 none swap sw 0 0 /dev/sdd1 /media/sdd1 ntfs nls=iso8859-1,ro,users,umask=000,user 0 0 /dev/sdd5 /media/PS3 (fat32) vfat users,user 0 0 /dev/sdd5 /media/sdd5 vfat uid=m3talhead,users,user 0 0 I'm guessing its a problem with the duplicate /dev/sdd5 entries (?), but being the *nix noob I am, I'm not certain. What am I missing? Any assist is greatly appreciated!

    Read the article

  • how to install curl 13.04 with depency error

    - by whale_steward
    how to install curl in ubuntu 13.04? it always throw this error : Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: curl : Depends: libcurl3 (= 7.29.0-1ubuntu3) but 7.29.0-1ubuntu3.2 is to be installed E: Unable to correct problems, you have held broken packages. when using sudo apt-get update, it shows: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. here are the steps i had done : using sudo apt-get install curl removing google-chrome-stable and chromium browser then sudo apt-get install curl use sudo apt-get autoremove && sudo apt-get autoclean && sudo apt-get clean then run the 1st step again. also i have tried : How do I resolve unmet dependencies? and still throw the same error. at this point i dont know what i did wrong, is curl impossible to install in ubuntu ?

    Read the article

  • Delphi Client-Server Application using Firebird 2.5 error

    - by Japie Bosman
    I have got a lengthy question to ask. First of all Im still very new when it comes to Delphi programming and my experience has beem mostly developing small single user database applications using ADO and an Access database. I need to take the transition now to a client server application and this is where the problem starts. I decided to use Firebird 2.5 embeded as my database, as it is open source, and it is can be used with the interbase components in Delphi and that multiple clients can access the database simultanously. So I followed the interbase tutorial in Delphi. I managed to connect the client to the server and see the data in the example (While both are running on my pc), but when i tried to move the client to another pc, keeping the server on mine and running it to see if I can connect to the server it gave me the following error. Exception EIdSocketError in module clientDemo.exe at 0029DCAC. Socket Error # 10061 Connection refused. I understand that this might be because the host is defined as localhost in the client. But here is my first question. In the TSQLConncetion you can set die hostname under Driver-Hostname. The thing I want to know is how do you do this at run time, as I cannot get the property when I try and make an edit box to allow the user to enter the value and then set it via code like for example: SQLConncetion1.Driver.Hostname := edtHost.text; The thing is there is not such property to set, so how do you set the hostname at run time? Im using Delphi XE2 There is still a lot of questions to come especially when it comes to deployment, but I will take this piece by piece and I appreciate the advice.

    Read the article

  • backface culling error (in world space)

    - by acrilige
    I write simple software renderer. In my pipeline i have stage of backface culling. But looks like it has some error (see picture). I perform culling right after world transformation (is it correct?). (i can't insert picture in post coz i don't have enough points, so i just upload it (cube model): http://imageshack.us/photo/my-images/705/bcerror.png/) Vector3F view_dir(0.0f, 0.0f, 1.0f); std::vector<Triangle> to_remove; for (Triangle &t : m_triangles) { Vector4F e1 = t.v2 - t.v1; Vector4F e2 = t.v3 - t.v1; Vector3F normal( e1.y * e2.z - e1.z * e2.y, e1.z * e2.x - e1.x * e2.z, e1.x * e2.y - e1.y * e2.x ); normal.Normalize(); float dot = Dot(view_dir, normal); if (dot <= 0) to_remove.push_back(t); } for (Triangle& t : to_remove) m_triangles.erase(std::remove(m_triangles.begin(), m_triangles.end(), t), m_triangles.end()); Camera sits in origin and points in screen (RH). What is the reason? For better explanation i upload picture with cube rotation screenshots: http://imageshack.us/photo/my-images/842/bcmove.png/ UPDATED: The error occurs only when triangle has non-zero offset from origin UPDATED 2: If i process backface culling in clip space (after transforming all vertices with view and projection matrix), and just check z coordinate of triangle normal - it works perfect... Can i perform culing RIGHT BEFORE view/proj transforms? In this case looks like culling will not depends of projection and it's not right?.. UPDATED 3: I found answer and will post it in two hours - again coz of reputation lack.

    Read the article

  • Error encountered compiling kernel 2.6.35-25.44

    - by Matt
    I downloaded the linux-source-2.6.35 package and tried to compile it using the command "fakeroot make-kpkg --append-to-version=.dbg kernel_image kernel_source kernel_headers --initrd" after "make menuconfig". The image .deb file is produced and installs fine, but an error stops the build process while trying to make the source package: scripts/Makefile.clean:17: /home/ade/linux-source-2.6.35/debian/linux-source-2.6.35.10.dbg/usr/src/linux-source-2.6.35.10.dbg/crypto/Makefile: No such file or directory make[1]: *** No rule to make target `/home/ade/linux-source-2.6.35/debian/linux-source-2.6.35.10.dbg/usr/src/linux-source-2.6.35.10.dbg/crypto/Makefile'. Stop. make: *** [_clean_crypto] Error 2 Sure enough, the folder linux-source-2.6.35/debian/linux-source-2.6.35.10.dbg/usr/src/linux-source-2.6.35.10.dbg/crypto does not exist (although all of the other kernel source folders appear to be there). I haven't even been able to determine where the folder is supposed to be copied over, or what's supposed to invoke clean. Am I doing something wrong here? It should be noted that I am running 10.04.

    Read the article

  • exception occurred for backend host '127.0.0.1/7001/7001': 'CONNECTION_REFUSED [os error=0, line 1715 of URL.cpp]: Error connecting to host 127.0.0.1:7001'

    - by Vijaya Moderator -Oracle
    When you hit the WLS Server via Proxy server, we may get the issue like below... [09/Jun/2014:06:05:50] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/0': 'PROTOCOL_ERROR [line 835 of URL.cpp]: Backend Server not responding' [09/Jun/2014:06:05:50] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/0': 'PROTOCOL_ERROR [line 835 of URL.cpp]: Backend Server not responding' [09/Jun/2014:06:05:51] failure ( 3284): for host 127.0.0.1 trying to GET /.../soundlink_wireless_​speaker/index.jsp, wl-proxy reports: exception occurred for backend host '127.0.0.1/7001/7001': 'CONNECTION_REFUSED [os error=0, line 1715 of URL.cpp]: Error connecting to host 127.0.0.1:7001' To solve the issue 1.  Check if there is any issue at the firewall by executing the below command     telnet 127.0.0.1 7001 2.  Also access  using the hostname instead of IP Address  If it errors out like below   Microsoft Telnet> o 127.0.0.1 7001 connecting to 127.0.0.1  Warning thrown at weblogic console: <BEA-000449> <Closing socket as no data read from it on 127.0.0.1:54,356 during the configured idle timeout of 5 secs>  Test the same again by disabling the firewall. Below are the steps... 1)Go to Start ----> Run  2)Type services.msc  3)In services.msc search for "Windows Firewall" and Right Click on "Windows Firewall"---->Select Stop. 4)Access the Weblogic URL  If the issue is resolved after disabling firewall, Request your  OS System Admin to open the port 7001 at the firewall end to access the application

    Read the article

  • this error appeared when upgrating 12.04 LTS to 12.10 [closed]

    - by habcity
    Possible Duplicate: How do I fix a “Problem with MergeList” error when trying to do an update? ryder@ryder-Q1500M:~$ do-release-upgrade Checking for a new Ubuntu release Get:1 Upgrade tool signature [198 B] Get:2 Upgrade tool [1,200 kB] Fetched 1,200 kB in 6s (6,988 B/s) authenticate 'quantal.tar.gz' against 'quantal.tar.gz.gpg' extracting 'quantal.tar.gz' [sudo] password for ryder: Reading cache A fatal error occurred Please report this as a bug and include the files /var/log/dist-upgrade/main.log and /var/log/dist-upgrade/apt.log in your report. The upgrade has aborted. Your original sources.list was saved in /etc/apt/sources.list.distUpgrade. Traceback (most recent call last): File "/tmp/update-manager-63XThv/quantal", line 10, in sys.exit(main()) File "/tmp/update-manager-63XThv/DistUpgrade/DistUpgradeMain.py", line 237, in main save_system_state(logdir) File "/tmp/update-manager-63XThv/DistUpgrade/DistUpgradeMain.py", line 130, in save_system_state scrub_sources=True) File "/tmp/update-manager-63XThv/DistUpgrade/apt_clone.py", line 146, in save_state self._write_state_installed_pkgs(sourcedir, tar) File "/tmp/update-manager-63XThv/DistUpgrade/apt_clone.py", line 173, in _write_state_installed_pkgs cache = self._cache_cls(rootdir=sourcedir) File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 102, in init self.open(progress) File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 145, in open self._cache = apt_pkg.Cache(progress) SystemError: E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_precise-backports_multiverse_i18n_Translation-en, E:The package lists or status file could not be parsed or opened.

    Read the article

  • Error while installing Komparator4

    - by Lucio
    I downloaded Komparator source from this page. The INSTALL file in the source say the following: Unpack komparator4-xxx.tar.bz2, and open a shell inside this directory mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix` .. make sudo make install I unpacked the file, make the directory, entered this, but when I have tried to cmake (sentece Nº3) the terminal print the following errors disabling me to make & install: CMake Error at /usr/share/cmake-2.8/Modules/FindKDE4.cmake:98 (MESSAGE): ERROR: cmake/modules/FindKDE4Internal.cmake not found in /home/lucio/.kde/share/apps;/usr/share/kde4/apps Call Stack (most recent call first): CMakeLists.txt:2 (find_package) CMake Warning (dev) in CMakeLists.txt: No cmake_minimum_required command is present. A line of code such as cmake_minimum_required(VERSION 2.8) should be added at the top of the file. The version specified may be lower if you wish to support older CMake versions for this project. For more information run "cmake --help-policy CMP0000". This warning is for project developers. Use -Wno-dev to suppress it. -- Configuring incomplete, errors occurred! What mean this errors and how can I fix it?

    Read the article

  • Error loading libGL.so.1

    - by jdp407
    When attempting to run various pieces of software (notably Steam and Yenka), I have come across an error similar to this: enter code here error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory I'm running a 64 bit system, with an NVidia Optimus card (I dual boot for certain windows only software that requires a dedicated graphics card). I have bumblebee installed, and I am using the nvidia-current driver, rather that one downloaded from NVidia, as recommended. The library (libGL.so.1) is not present in the top directory of /usr/lib, however it is present in /usr/lib32/nvidia-current, as a softlink to /usr/lib32/nvidia-current/libGL.so.304.64. A section of the output from ldconfig -p: libGL.so.1 (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 libGL.so (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/libGL.so libGL.so (libc6,x86-64, OS ABI: Linux 2.4.20) => /usr/lib/x86_64-linux-gnu/mesa/libGL.so Obviously a library with that name is being loaded, but they are located in /usr/lib/x86_64-linux-gnu, however installed software doesn't seem to able to 'see' it. For Steam, running it with optirun causes it to work, but this is not the case for Yenka. I assume that optirun causes the library stored in /usr/lib32/nvidia-current to be used, which allows Steam to run, so I can't understant why Yenka won't run. Can anyone explain why software can't see the normal mesa library, and why Yenka refuses to run with the nvidia-current library?

    Read the article

  • decent use-case for goto in c?

    - by Robz
    I really hesitate to ask this, because I don't want to "solicit debate, arguments, polling, or extended discussion" but I'm new to C and want to gain more insight into common patterns used in the language. I recently heard some distaste for the goto command, but I've also recently found a decent use-case for it. Code like this: error = function_that_could_fail_1(); if (!error) { error = function_that_could_fail_2(); if (!error) { error = function_that_could_fail_3(); ...to the n-th tab level! } else { // deal with error, clean up, and return error code } } else { // deal with error, clean up, and return error code } If the clean-up part is all very similar, could be written a little prettier (my opinion?) like this: error = function_that_could_fail_1(); if(error) { goto cleanup; } error = function_that_could_fail_2(); if(error) { goto cleanup; } error = function_that_could_fail_3(); if(error) { goto cleanup; } ... cleanup: // deal with error if it exists, clean up // return error code Is this a common or acceptable use-case of goto in C? Is there a different/better way to do this?

    Read the article

  • x server startx error?

    - by Chris
    root@thewhitewox:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-29-server i686 Ubuntu Current Operating System: Linux thewhitewox 2.6.18-238.9.1.el5.028stab089.1 #1 SMP Thu Apr 14 14:06:01 MSD 2011 i686 Kernel command line: quiet Build Date: 20 October 2011 03:05:54PM xorg-server 2:1.7.6-2ubuntu7.10 (For technical support please see ww w.ubuntu . com/support) Current version of pixman: 0.16.4 Before reporting problems, check http: //wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 15 00:50:32 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http ://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log What does this mean and how can I fix it?

    Read the article

  • Error while installing an application

    - by Bong.Da.City
    So i have installed synaptic package manager.. via it, i have checked once libopencv-highgui-dev and applied complete removal.. after that i installed it... now everytime i try to install an application e.g Format Junkie sudo add-apt-repository ppa:format-junkie-team/release && sudo apt-get update && sudo apt-get install formatjunkie in the command install format junkie it gives me that error everytime: sudo apt-get install formatjunkie Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libopencv-features2d-dev : Depends: libopencv-highgui-dev (= 2.3.1-11ubuntu2) but it is not going to be installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. What should i do? And 2nd what did i did wrong so it won't happen another time? output of lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal

    Read the article

  • Is this a decent use-case for goto in C?

    - by Robz
    I really hesitate to ask this, because I don't want to "solicit debate, arguments, polling, or extended discussion" but I'm new to C and want to gain more insight into common patterns used in the language. I recently heard some distaste for the goto command, but I've also recently found a decent use-case for it. Code like this: error = function_that_could_fail_1(); if (!error) { error = function_that_could_fail_2(); if (!error) { error = function_that_could_fail_3(); ...to the n-th tab level! } else { // deal with error, clean up, and return error code } } else { // deal with error, clean up, and return error code } If the clean-up part is all very similar, could be written a little prettier (my opinion?) like this: error = function_that_could_fail_1(); if(error) { goto cleanup; } error = function_that_could_fail_2(); if(error) { goto cleanup; } error = function_that_could_fail_3(); if(error) { goto cleanup; } ... cleanup: // deal with error if it exists, clean up // return error code Is this a common or acceptable use-case of goto in C? Is there a different/better way to do this?

    Read the article

  • error: no such partition after 11.10 upgrade to 12.04

    - by Alan King
    -I recently upgraded my 11.10 install to 12.04 LTS and got the above error message upon reboot after a GNU GRUB version ubuntu3 display showing Ubuntu 3.2.0-23-generic pae and other kernels or memory tests to choose from. The upgrade had to be done by CD because the Update Manager did not show the 12.04 upgrade option. After selecting the default install option of upgrading 11.10 to 12.04, I was presented with a screen saying that I had not specified a swap partition. Upon selection the 'back' key, I was taken to a partition page which listed two current partitions (only Ubuntu 11.10 had been installed - no Windoz): an ext4 partition plus a small 1.8GB partition. I double clicked the small partition and selected it as the swap partition even though I wondered at the time why this even came up. I can see the two user folders under home from the file manager screen while runnning 12.04 from the CD but if I try to access either one an error message is displayed saying I do not have permission while I get a loading message in the lower right corner of the window that does not go away. I have two questions: Can I access the user folders prior to recovery via the Terminal? If so, how? How do I fix the GRUB issue?

    Read the article

  • .htaccess causes 403 error

    - by erdomester
    I have a working website on a free shared server. I decided to hire a dedicated server and purchase a domain for my website. I started uploading the files but things aren't working the way they should. First of all .htaccess is not working, however I set AllowOverride from None to All in /etc/apache2/sites-available/default DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> I restarted the server of course. I enabled mod_rewrite: a2enmod rewrite and restarted the server. This change causes a 403 forbidden access error which I am unable to work out. If I change the All back to None then .htaccess is ignored so instead of loading the website the file hierarchy is loaded (the main page is index4.php which should be opened by .htaccess). If I rename index4.php to index.php the website loads, just fyi. The permissions on the file is 600. If I change it to 444 I get 500 Internal Server Error. I checked the logs and I see many errors of this: Permission denied: file permissions deny server access: /var/www/index.html

    Read the article

  • Twitter "Authentication Error" Turpial & Choqok (latest versions)

    - by PineMarten
    I use Turpial a lot, but Turpial isn't connecting at all. I can still connect to Twitter thru the OS app (no issues signing in through Online Accounts) and of course I can still sign in using the browser, but Turpial gives me an "Authentication Error" and Choqok fails to do anything. I've tried changing my password, revoking the Turpial and Ubuntu apps in Twitter and re-enabling them, but then it gives me an "Invalid Credentials" message. I've even removed and installed Turpial multiple times, still nothing. I can't find any information or resources for this type of error from Turpial online. I think it may be something recent after finding this message elsewhere: (article related to "Birdie") It looks promising i'm currently using it atm, since all the other twitter clients no longer work due to the API 1.0 shutdown (posted today) I've never used Choqok before today, so I don't even know if I've set it up properly. It's failing to retrieve or send Tweets it just blank screens, but at least it signs in. I've figured that this isn't an issue with Ubuntu, or Turpial or Choqok, or the router (already replaced it today), so I don't really know what I'm dealing with here. I hope it's not another API issue, Facebook did something similar just a few weeks ago

    Read the article

  • Librated error when creating partition table

    - by Marko
    I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

    Read the article

  • SQL 2008/2005 Hosting :: Error - “Named Pipes Provider, error: 40 – Could not open a connection to SQL Server”

    - by mbridge
    When setting up a Microsoft Windows Server 2008 system, I went through the motions to set up IIS, MS SQL Server 2008, and Visual Studio 2010 to use as a test-bed. One of the immediate benefits of setting up such a system is that most development can be done remotely: MS SQL Server Management Studio, Visual Studio’s Web development suite, as well as file shares, remote desktop, etc, make for a great way to remotely develop in ‘pristine’ conditions. But there are drawbacks, too, such as needing to deal with firewall issues, not being able to penetrate past a router or the requirement of setting up a VPN. One of the problems I encountered when trying to remote into the MS SQL Server 2008 that I’d set up was the following error: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server I followed the below steps, and was able to connect to the server after just a few moments of tinkering: 1. From the server in question, surf to this Microsoft article, and download and install the Firewall rules modification program. Never drop your firewall, even on a development machine, unless you have a really good reason to. 2. Launch SQL Server Configuration Manager. Navigate to SQL Server Network Configuration, then Protocols for your server name. Enable TCP/IP and Named Pipes by right-clicking and choosing Enable for each given Protocol Name. 3. Restart the SQL Server service from Services (or from command line, subsequently run “net stop mssqlserver” then “net start mssqlserver”. 4. Try your remote connection once more, and you should be able to connect. It’s not a terribly difficult concept, but one of the more challenging tasks developers face is dealing with environment setup. And while there is a certain blurred-line overlap between software development and server administration, sometimes the latter is daunting, especially given that you might set up only a handful of servers during your career.

    Read the article

  • Why I am getting Presentation Error [on hold]

    - by user105697
    Below is my code. When I submit it in UVA they are giving me Presentation error. I want to know the reason. I have tried all possible ways. In my code I use 2D-array to store each word of a sentence. I also want to know the reason for giving presentation error. #include<stdio.h> #include<string.h> int main() { char a[10000],ar[100][10000]; int i,j,k,m,n,l,len[10000],c; freopen("input.txt","r",stdin); while(gets(a)) { k=0; i=0; c=0; for(j=0; ; ++k) { if(a[k]==' ' || a[k]=='\0') { ar[i][j]='\0'; len[i]=c; if(a[k]=='\0') break; i++; j=0; c=0; } else { ar[i][j]=a[k]; c++; j++; } } for(m=0; m<=i; m++) { for(n=(len[m]-1); n>=0; n--) { printf("%c",ar[m][n]); } printf(" "); } printf("\n"); } return 0; }

    Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >