Search Results

Search found 7435 results on 298 pages for 'hardware'.

Page 133/298 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

  • Windows 7 boot problem

    - by nijikunai
    My system doesn't boot at all, upon starting it takes me to the Windows Error Recovery screen saying "Windows failed to start, a recent software or hardware change might be the cause" and gives two options Launch System Repair (Recommended) Start Windows normally But neither options work, upon clicking either of them, some progress bars get displayed and the screen just freezes on "Starting Windows". I tried booting from the Windows 7 disk but it too freezes on the "Starting Windows" screen. I even tried booting from ubuntu, slax linux, but they don't work too.

    Read the article

  • Preparing laptops for theft

    - by ccook
    With a number of laptops out there the likelihood of one being stolen is high. What methods, preferably free, can be used to secure the data on the computers? The laptops do not have any special hardware on them, and generally keep their user data in a dropbox folder. One small step taken is to have the the dropbox folder encrypted by Windows 7. Any additional suggestions are greatly appreciated. The data in the dropbox folder is sensitive.

    Read the article

  • How should I convert a physical drive to a VHD for use with VirtualPC?

    - by RBerteig
    I have the hard disks from a PC that was happily running Windows Me until is it suffered an unknown hardware failure. The drives are intact, and can be mounted and read on other PCs. We have data backups, but there is licensed software installed that may not be possible to migrate to newer versions running on a more modern platform making the idea of just booting a virtual image attractive. Is it possible to make VHDs from the drives such that I can boot them in VirtualPC? If not VirtualPC, would it be possible in any other virtualization tool? Edit: Some more details.... The system was running Windows Me, but upgraded from Windows 95 (or possibly 98). It can't have been more than a Pentium II, but I will have to look at the motherboard to confirm that. There were no "exotic" devices installed, and nothing beyond the usual legacy stuff that would need to survive into a virtual machine. The licensed software did not have a dongle, so I won't need to worry about virtualizing a physical dongle of some kind. Licenses were probably died to the disk serial number. There were two HDs, both IDE. The boot disk is about 6GB, and the spare data disk is 12GB, but nearly empty. I have a small bias in favor of VirtualPC just because its free and I've used it successfully in the past. But this is a good excuse to revisit the state of the art. I do know from direct experience that it is possible to install and boot DOS 5.0 and Win95 in VirtualPC, but the VM extensions weren't available so the experience isn't as seamless as I would have liked. A very old DirectX game that failed miserably under XP SP2 runs really nicely on that VM, and actually plays better in a lot of ways than it did on period hardware, so that gives me hope that this is possible. Edit 2: Well, I'm closer than I was when I asked... so thanks to all for helpful suggestions and hints to what I should be trying. I used WinImage to copy the disks, and VirtualPC 2007 to attempt to boot. So far, I have it booting in safe mode, but hanging with a black screen otherwise. I strongly suspect that the copy of Artisoft Lantastic 8.0 (anyone else remember them?) that is still installed for networking with even older PCs that mostly don't exist any more is the culprit there. In my infinite free time, I will try to resolve the differences between a Safe Mode boot and a normal boot, and feel that it is likely to yield to pressure. I'd accept more than one answer if I could... this isn't as black and white a question as the one accepted answer convention assumes.

    Read the article

  • How much it costs to tun own hosting server

    - by Mirage
    I currently have VPS in my company and there i host about 20 websites. My copany wants to set up server locally where they can host all websites rtaher using 3rd party VPS How it will cost e,g about upload ,download speed from data centre. Cpanels license IP registration, hardware , backups, electricity backups, Any other cots etc I would prefer centos

    Read the article

  • Mac OS X Leopard Kernel Panics getting absurd

    - by Henri Watson
    Today Mac OS X kernel panicked twice on me. The first time, I got this log. The second time, I got this log. A few minutes ago, iTunes started sounding blocky, after quitting FireFox everything went back to normal, I am currently using Opera. These are my system's specs. EDIT: I ran the apple hardware test and got these results. Without extended testing: With extended testing:

    Read the article

  • p2v v2v v2p tool from open source?

    - by neolix
    we have centos, fedora, ubuntu server and desktop we are looking for good open source tool for p2v v2v v2p and we are not using vmware here only we use xen or kvm. Same of the server shifted to new hardware and same of the server on xen or kvm. Can same help me !!

    Read the article

  • Intel GMA 4500MHD flickering in opengl

    - by Aaron
    I have an application that uses OpenGL for its display. When this application is run on a laptop with an Intel GMA 4500MHD on Windows XP the OpenGL content appears to flicker/shudder between 2 frames. I have experienced the exact same problem when running this application on nVidia Quadro FX hardware, however with nVidia the problem can be corrected by disabling the "Unified Back Buffer" (UBB) feature in the driver. Does anybody know how I can disable the corresponding feature in the Intel driver?

    Read the article

  • Xen guest miration to host with missing features

    - by deploymonkey
    If I want to move a xen guet (domU) from one host (dom0) to another host on another hardware platform which misses some capabilities, say virtualisation features, especially directio or likewise, will my image be able to run despite missing capabilities of the new host? This is important because I need to know if I can prepare XEN images on my workstation with full virtualisation features and deploy same images on less capable Servers later on. Thanks for the help and input

    Read the article

  • Building an SSL server farm

    - by dan
    I'm interested in building the the architecture in the article referenced below. I currently have a modestly-priced layer-4 load balancer and my application servers are the SSL endpoints. I want to put an SSL server farm in between my load balancer and my app servers. Then I will put another inexpensive load balancer between the SSL farm and my app servers, to do layer-7 routing. My web application has a fairly high amount of consumer traffic, that 6 servers can handle at about 50% capacity. Additionally, I have infrastructure traffic that is several orders of magnitude heavier than my consumer traffic. This is data coming in from all over the world that must integrate with my web application in real time. In total I have 18 app servers to handle all the traffic, plus 6 database servers. I will be adding 6 more app servers over the next 2 weeks and another 6 the 2 weeks after that. Conservatively, I estimate I will need to scale to 120 servers by the end of the year. My motivation right now is to separate the consumer traffic from the infrastructure traffic. The consumer traffic is higher priority than the infrastructure traffic and I cannot allow a stampede on the infrastructure side to take down my consumer-facing servers. Having a website that is always up is the top priority. However if there is a failure in one of the consumer app servers, I want to route that traffic to the servers designated for infrastructure traffic. The complication is that all the traffic is addressed using the same hostname and is nearly 100% https. The only way in my case to distinguish infrastructure from consumer traffic is by URL (poor architecture I inherited), so I need a layer 7 load balancer to be able to route. However for that to work I need either a fancy hardware-based SSL terminator or an SSL server farm as described above. Because my user base is rapidly scaling, I worry that if I go down the hardware path it will become very expensive very fast, especially since I will need 4 of everything for high availability (2 identical setups in 2 facilities). Meanwhile, the above diagram seems very flexible and more horizontally scalable. Has anyone built this before? Are there pre-built configurations? What considerations should I make and what software should I use (I've heard of people using apache with mod-ssl, nginx, and stunnel)? Also, when does it make sense to buy an expensive load balancer vs building an SSL server farm? http://1wt.eu/articles/2006_lb/index_05.html

    Read the article

  • Servers behind load balancer

    - by Tom
    We have a CISCO hardware load balancer with two web servers behind it. We'd like to force some URLs to only be served by one of the machines. Firstly, is the job of the load balancer? or would a better approach be create a subdomain such as http://assets.example.com which would be automatically be routed to one of the servers?

    Read the article

  • SafeOffice 500 - how to enable VPN access to another network (out)

    - by Dani
    Hi, I have a safe office 500 box at my edge. (checkpoint's hardware firewall) I'm trying to connect to another office VPN using windows 7 pptp connection. It fails (saying something about enabling GRE). (after authenticating, hangs for a while, than give the error message.) Using the same computer with direct internet access (not behind the firewalls) works fine and I get connected. how do I setup the safe office to enable me to use vpn (pptp) out connections.

    Read the article

  • How do I diagnose Windows XP failure to automatically suspend on idle?

    - by Software Monkey
    Since upgrading my hardware (mobo, CPU and memory) a couple months ago my computer no longer automatically suspends and hibernates after the configured idle periods. Both functions work just fine manually, but if I leave the computer on overnight it's still active the next morning even though it's configured to sleep after 3 hours and hibernate after 6 hours. How do I diagnose the cause of this?

    Read the article

  • Rack layout tools

    - by Luke
    I'm wondering if there's any tools (preferably offline) that would allow me to layout all of the new equipment that will be going into several standard racks. Currently I'm using Excel to map out all of the slots columns for the data but I suspect that there is some better method of doing this. Suggestions? Edit: Dell has an online tool, but doesn't seem very good at actually saving the data that you're working on (and obviously it's geared towards Dell hardware).

    Read the article

  • how to make sure the OS can recognize my modem ??

    - by Raafat
    Warning ... novice Linux user problem right here ... my modem is Actiotec MDC AC'97 Modem v2132D, how can i be sure that it's a software or a hardware one??, also how can i be sure that it's working on my OS??, or my OS can recognize it or not??, I'm using Linux Debian 5.0, with KDE thanx in advanced ... Raafat

    Read the article

  • How to install missing Sound Drivers in Ubuntu?

    - by Sakamoto Kazuma
    I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

    Read the article

  • Dell E6400 Display issue - "doubling up" intermittently

    - by alex
    I've got a Dell E6400 It's suddenly developed an intermittent fault with the display Every now and again, it seems to boot up with "double vision" By that I mean, its split horizontally, with each half showing the same thing, but with low resolution, and looks grainy - if that makes sense (I will try to get a couple of pictures if I can) I haven't changed any hardware or anything. I have re-built windows, to see if that fixed the problem, it didn't. I've upgraded the BIOS to see if that would help, still same problem. I'm out of ideas :-(

    Read the article

  • Symantec Gateway Security 320 VPN/Port Forwarding trouble

    - by Owl
    How do I check to see if port forward is enabled with one of my dynamic tunnels on this device? I'm having trouble using a feature in our software that requires a vpn to be used. My firewalls shows it as connected but I'm unable to ping the subnet ip. Our software vendor told me that port forwarding might be causing this problem, but I didn't set up this network I'm on and I don't fully know symantec hardware.

    Read the article

  • What Are Some Good Open Source Alternatives to Active Directory?

    - by Laz
    I'm looking for a good open-source alternative to active directory that can handle: Authorization/Authentication Group Policy Replication and Trust Monitoring In addition, are there any consolidated systems out there that handle these responsibilities? Edit: Since a lot have asked for more details, I am trying to offer a service setting up an infrastructure for organizations, hardware/software setups, right now I am looking at a Linux stack, both desktops and servers, however a hybrid stack is possible, and I am investigating alternatives.

    Read the article

  • Install Snow Leopard on Toshiba x86 machine ? [closed]

    - by patrickinmpls
    Possible Duplicate: Is it possible to install Mac OS X on customized hardware? Well, I don't think its possible - but I'm curious why not - but can someone install Mac OS's on Intel machines? For along time the architecture was different RISC vs x86, but then later they moved to x86, so how difficult is it to install Snow Leopard on a regular Wintel laptop / desktop?

    Read the article

  • Upgrade OEM Windows 7 Pro to Windows 7 Enterprise

    - by user17111
    Our hardware vendor has sold us a laptop that comes with Windows 7 Pro OEM. Since we want Windows 7 Enterprise (for features like DirectAccess and BitLocker), the vendor has supplied us with a Software Assurance only license to upgrade OEM Win 7 Pro to Win 7 Ent. Do I need to install Windows 7 Enterprise Volume License media and re-install Windows, or is there a process to turn this existing Windows 7 Pro install into an "Enterprise" ?

    Read the article

  • how can I boot xp after receiving stop error 0x000000ED

    - by waterfalrain
    I read somewhere that the ultimate boot cd can diagnos computer problems in this case would this program help me get my windows xp back? When I turn on the screen and hit start windows normal or go to safe mode I get a flash of the win xp logo and then it goes to this error page. Can you tell from this message is it a hardware or software issue

    Read the article

  • Is there a way to suppress keyboard sounds picked up by a desktop microphone in Windows 7?

    - by Dave Andersen
    The problem I'd like to solve is that my desktop microphone picks up all my keystrokes very loudly compared with my voice. Even just lightly tapping a key without depressing it causes a loud click to be picked up. I'd like a way to filter out this type of sound, while picking up voice normally. Is there any software input equalizer/filter that could do this? Or alternatively, some sort of hardware hack?

    Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >