Search Results

Search found 71826 results on 2874 pages for 'master data services'.

Page 133/2874 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• Spreading incoming batched data into a real-time stream

  - by pr1001

  I would like to display some events in 'real-time'. However, I must fetch the data from another source. I can request the last X minutes, though the source is updated approximately every 5 minutes. This means that there will be a delay between the most recent data retrieved and the point in time that I make the request. Second, because I will be receiving a batch of data, I don't want to just fire out all the events down a socket once my fetcher has retrieved it: I would like to spread out the events so that they are both accurately spaced amongst each other and in sync with their original occurrences (e.g. an event is always displayed 6 minutes after it actually happened). My thought is to fetch the data every 5 minutes from the source, knowing that I won't get the very latest data. The original data would be then queued to be sent down the socket 7.5 minutes from its original timestamp – that is, at least ~2.5 minutes from when its batch was fetched and at most 7.5 minutes since then. My question is this: is this the best way to approach the problem? Does this problem have any standard approaches or associated literature related to implementation best-practices and edge cases? I am a bit worried that the frequency of my fetches and the frequency in which the source is updated will get out of sync, leading to points where no data will be retrieved from the source. However, since my socket delay is greater than my fetch frequency, the subsequent fetch should retrieve newer data before the socket queue is empty. Is that correct? Am I missing something? Thanks!

  Read the article

• Fiddler - A useful free tool for checking Web Services (and web site) traffic

  - by TATWORTH

  Recently I had reason to be very glad that I had Fiddler. I was able to record some web service traffic and identify a problem as Fiddler can record both the call to a web service and response from the web service. By seeing the actual data traffic I was able to resolve a problem found in testing in less time than it has taken me to write this blog entry! This tool is also useful for studying general web site traffic. Fiddler is available from http://www.fiddler2.com/fiddler2/ There are training videos available on the above site.

  Read the article

• Using R on your Oracle Data Warehouse

  - by jean-pierre.dijcks

  Since it is Predictive Analytics World in our backyard (or are we San Francisco’s backyard…?) I figured it is well worth the time to dust of some old but important news. With big data (should we start calling it “any data analytics” instead?) being the buzz word and analytics the key operative goal, not moving data around is becoming more and more critical to the business users. Why? Because instead of spending time on moving data around into your next analytics server you should be running analytics on those CPUs. You could always do this with Oracle Data Mining within the Oracle Database. But a lot of folks want to leverage R as their main tool. Well, this article describes how you can do this, since 2010… As Casimir Saternos concludes in the article; “There is a growing awareness of the need to effectively analyze astronomical amounts of data, much of which is stored in Oracle databases. Statistics and modeling techniques are used to improve a wide variety of business functions. ODM accessed using the R language increases the value of your data by uncovering additional information. RODM is a powerful tool to enable your organization to make predictions, classify data, and create visualizations that maximize effectiveness and efficiencies.” Happy Analysis!

  Read the article

• How Web Optimization Services Work to Increase Your on the Internet Reputation

  SEO is a symbol of search engine optimization and that is the key to success from the enterprise. No site has meaning if it seriously isn't properly promoted. Anytime any web surfer is in look up of any certain merchandise, providers or data he makes use of the easiest method of browsing as a result of search engine optimization and this is habit of many individuals to only search straight into 5 or six major sites for their goal. No person has time to seem directly into 100 pages of internet search engine as there is no need to have when he finds in major pages.

  Read the article

• Project Turing: Beginning RIA Services

      Turing Project Page: [Novice: 9 | Advanced: 6 ]    FAQ | Table of Contents | Definitions What is this and where do I start? Reposted with VB.Net code     From Database to DataGrid The next step in Project Turing is to create a first iteration of the Silverlight application that will retrieve data from our database.  Using our technology of [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• What is a Relational Database Management System (RDBMS)?

  A Relational Database Management System (RDBMS)  can also be called a traditional database that uses a Structured Query Language (SQL) to provide access to stored data while insuring the integrity of the data. The data is stored in a collection of tables that is defined by relationships between data items. In addition, data permitted to be joined in new relationships. Traditional databases primarily process data through transactions called transaction processing. Transaction processing is the methodology of grouping related business operations based predefined business events. An example of this can be seen when a person attempts to purchase an item from an online e-tailor. The business must execute specific operations for a related  business event. In this case, a business must store the following information: Customer Info, Order Info, Order Item Info, Customer Payment Data, Payment Results, and Current Order Status. Example: Pseudo SQL Operations needed for processing an online e-tailor sale. Insert Customer into Customers Insert New Order into Orders Insert Each New Order Item into OrderItems Insert Customer Payment Info into PaymentInfo Insert Payment Processing Result into PaymentDetails Update Customer for Current Order Status Common Relational Database Management System Microsoft SQL Server Microsoft Access Oracle MySQL DB2 It is important to note that no current RDBMS has fully implemented all of the Relational Principles. Common RDBMS Traits Volatile Data Supports Transaction Processing Optimized for Updates and Simple Queries 

  Read the article

• Why is Reporting Services report vastly slower than its query?

  - by Telos

  I have a query that takes roughly 2 minutes to run. It's not terribly complex in terms of parameters or anything, and the report itself doesn't do any truly extensive processing. Basically just spits the data straight out in a nice format. (Actually one of the reports doesn't format the data at all, just returns a flat table meant to be manipulated in excel.) It's not returning a massive set of data either. Yet the report takes upwards of 30 minutes to run. What could cause this? This is SSRS 2005 against a SQL 2005 database btw. EDIT: OK, I found that with the addition of WITH (NOLOCK) in the report it takes the same time as the query does through SSMS. Why would the query be handled differently if it's coming from reporting services (or visual studio on my local machine) than if coming from SSMS on my local machine? I saw the query running in Activity Monitor a couple times in SLEEP_WAIT mode, but not blocked by anything... EDIT2: The connection string is: Data Source=SERVERNAME;Initial Catalog=DBName

  Read the article

• What is the best practice for ouputting data from a collection on an ASP.net Page?

  - by bshacklett

  I've ported a page from classic ASP to ASP.net. Part of what happens in this page is that a collection of custom types is generated and then displayed via Response.Write() commands. I'd like to get the business logic separated out into a code behind file (and maybe move this all into a user control), but I can't seem to figure out how I'd actually display the collection once it's been generated. I want to specify a master page here, too, so the code can't stay inline. Here's a very stripped down version of the current code: <% Dim objs as ArrayList = New ArrayList() For i = 0 To 2 Dim obj as Obj = New Obj() obj.setProp1("ASDF") obj.setProp2("FDSA") objs.Add(obj) Next i %> <table> <thead> <tr> <th scope="col">Property 1</th> <th scope="col">Property 2</th> </tr> </thead> <tbody> <% For Each obj As Obj In objs Dim objProp1 As String = obj.getProp1 Dim objProp2 As String = obj.getProp2 %> <tr> <td><% Response.Write(objProp1)%></td> <td><% Response.Write(objProp2)%></td> </tr> <% Next %> </tbody> </table> What is the ".net" way of doing this?

  Read the article

• How to tell what name RIA Services/EF Model uses for Associations?

  - by Nick Gotch

  Hi, I'm working on a C#.NET 3.5 WCF RIA Services app and having an issue with my Entity Framework model. My entity Foo is mapped to a DB table and has a primary key called FooId. My Bar is mapped to a DB view. I've selectively designed this view to generate a composite key in the EF using two of the columns (by making sure they were non-nullable and the others are all nullable. This was done using NULLIF and ISNULL in the view design.) I'm able to add this view to the model with no problem but I keep running into an issue when I try to map an association between the two. Foo should contain many Bars but I keep getting the following error when I add the association: Unable to retrieve AssociationType for association 'FK_Bar_Foo' According to this page, it looks like this might work if I can properly name the association (since RIA Services looks for specific names.) I've tried several variants of names that match the pattern of other associations with no success. Does anyone know if there's a place I can look to find out what name it's looking for? Thanks,

  Read the article

• Should I remove all inheritance from my model in order to work with ria services?

  - by TimothyP

  I've posted some questions on this before, but it's different. So consider a small portion of our model: Person Customer Employee Spouse Person is the base class which has 3 classes that inherit from it. These 4 are very central in our design and link to many other entities. I could solve all the problems I'm experiencing with ria-services by removing the inheritance but that would really increase the complexety of the model. The first problem I experienced was that I couldn't query for Customers, Employees or Spouses, but someone gave me a solution, which was to add something like this to the DomainService: public IQueryable<Employee> GetEmployees() { return this.ObjectContext.People.OfType<Employee>(); } public IQueryable<Customer> GetCustomers() { return this.ObjectContext.People.OfType<Customer>(); } public IQueryable<Spouse> GetSpouses() { return this.ObjectContext.People.OfType<Spouse>(); } Next I tried something that seemed very normal to me: var employee = new Employee() { //.... left out to reduce the length of this question }; var spouse = new Spouse() { //.... left out to reduce the length of this questions }; employee.Spouse = spouse; context.People.Add(spouse); context.People.Add(employee); context.SubmitChanges(); Then I get the following exception: Cannot retrieve an entity set for the derived entity type 'Spouse'. Use EntityContainer.GetEntitySet(Type) to get the entity set for the base entity type 'Person'. Even when the spouse is already in the database, and I retreive it first I get similar exceptions. Also note that for some reason in some places "Persons" is used instead of "People"... So how do I solve this problem, what am I doing wrong and will I keep running into walls when using ria services with inheritance? I found some references on the web, all saying it works and then some DomainService code in which they suposedly changed something but no details... I'm using VS2010 RC1 + Silveright 4

  Read the article

• Olympics data available for all on Windows Azure SQL Database and Power View

  - by jamiet

  Are you looking around for some decent test data for your BI demos? Well, if so, Microsoft have provided some data about all medals won at the Olympics Games (1900 to 2008) at OlympicsData workbook - Excel, SSIS, Azure sample; it provides analysis over athletes, countries, medal type, sport, discipline and various other dimensions. The data has been provided in an Excel workbook along with instructions on how to load the data into a Windows Azure SQL Database using SQL Server Integration Services (SSIS). Frankly though, the rigmarole of standing up your own Windows Azure SQL Database ok, SQL Azure database, is both costly (SQL Azure isn’t free) and time consuming (the provided instructions aren’t exactly an idiot’s guide and getting SSIS to work properly with Excel isn’t a barrel of laughs either). To ease the pain for all you BI folks out there that simply want to party on the data I have loaded it all into the SQL Azure database that I use for hosting AdventureWorks on Azure. You can read more about AdventureWorks on Azure below however I’ll summarise here by saying it is a SQL Azure database provided for the use of the SQL Server community and which is supported by voluntary donations. To view the data the credentials you need are: Server mhknbn2kdz.database.windows.net  Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly Type those into SSMS and away you go, the data is provided in four tables [olympics].[Sport], [olympics].[Discipline], [olympics].[Event] & [olympics].[Medalist]: I figured this would be a good candidate for a Power View report so I fired up Excel 2013 and built such a report to slice’n’dice through the data – here are some screenshots that should give you a flavour of what is available: A view of all the available data Where do all the gymastics medals go? Which countries do top ten all-time medal winners come from? You get the idea. There is masses of information here and if you have Excel 2013 handy Power View provides a quick and easy way of surfing through it. To save you the bother of setting up the Power View report yourself you can have the one that I took these screenshots from, it is available on my SkyDrive at OlympicsAnalysis.xlsx so just hit the link and download to play to your heart’s content. Party on, people! As I said above the data is hosted on a SQL Azure database that I use for hosting “AdventureWorks on Azure” which I first announced in March 2013 at AdventureWorks2012 now available for all on SQL Azure. I’ll repeat the pertinent parts of that blog post here: I am pleased to announce that as of today … [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use for their own means. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected] Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more than we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. I’d like to emphasize that last point. If my hosting this Olympics data is useful to you please support this initiative by donating. Thanks in advance. @Jamiet

  Read the article

• Making user input/math on data fast, unlike excel type programs

  - by proGrammar

  I'm creating a research platform solely for myself to do some research on data. Programs like excel are terribly slow for me so I'm trying to come up with another solution. Originally I used excel. A1 was the cell that contained the data and all other cells in use calculated something on A1, or on other cells, that all could be in the end traced to A1. A1 was like an element of an array, I then I incremented it to go through all my data. This was way too slow. So the only other option I found originally was to hand code in c# the calculations inside a loop. Then I simply recompiled each time I changed my math. This was terribly slow to do and I had to order everything correctly so things would update correctly (dependencies). I could have also used events, but hand coding events for each cell like calculation would also be very slow. Next I created an application to read Excel and to perfectly imitate it. Which is what I now use. Basically I write formulas onto a fraction of my data to get live results inside excel. Then my program reads excel, writes another c# program, compiles it, and runs that program which runs my excel created formulas through a lot more data a whole lot faster. The advantage being my application dependency sorts everything (or I could use events) so I don't have to (like excel does) And of course the speed. But now its not a single application anymore. Instead its 2 applications, one which only reads my formulas and writes another program. The other one being the result which only lives for a short while before I do other runs through my data with different formulas / settings. So I can't see multiple results at one time without introducing even more programs like a database or at least having the 2 applications talking to each other. My idea was to have a dll that would be written, compiled, loaded, and unloaded again and again. So a self-updating program, sort of. But apparently that's not possible without another appdomain which means data has to be marshaled to be moved between the appdomains. Which would slow things down, not for summaries, but for other stuff I need to do with all my data. I'm also forgetting to mention a huge problem with restarting an application again and again which is having to reload ALL my data into memory again and again. But its still a whole lot faster than excel. I'm really super puzzled as to what people do when they want to research data fast. I'm completely unable to have a program accept user input and having it fast. My understanding is that it would have to do things like excel which is to evaluate strings again and again. So my only option is to repeatedly compile applications. Do I have a correct understanding on computer science? I've only just began programming, and didn't think I would have to learn much to do some simple math on data. My understanding is its either compiling my user defined stuff to a program or evaluating them from a string or something stupid again and again. And my only option is to probably switch operating systems or something to be able to have a program compile and run itself without stopping (writing/compiling dll, loading dll to program, unloading, and repeating). Can someone give me some idea on how computers work? Is anything better possible? Like a running program, that can accept user input and compile it and then unload it later? I mean heck operating systems dont need to be RESTARTED with every change to user input. What is this the cave man days? Sorry, it's just so super frustrating not knowing what one can do, and can't do. If only I could understand and learn this stuff fast enough.

  Read the article

• Week in Geek: USDA Chooses Microsoft for Cloud Services Edition

  - by Asian Angel

  This week we learned how to create geeky LED holiday lights with old bottles, dig deeper in Windows Defrag via the command prompt, use Google Chrome’s drag/drop feature to upload files easier, find great gift recommendations by looking through the How-To Geek holiday gift guide, and have fun adding Merry Christmas fonts to our computers. Photo by ntr23. Random Geek Links It has been a busy week, so we have extra news link goodness with information that is good for you to know. USDA making the move to Microsoft The U.S. Department of Agriculture has announced that it has chosen Microsoft to host things like e-mail, instant messaging, and collaboration through the software giant’s Business Productivity Online Suite. Google says it was cut off from USDA project bid Google is claiming that it was not given a chance to bid on a cloud-computing project for the U.S. Department of Agriculture, for which the contract was awarded to rival Microsoft. Apache is being forced into a Java Fork When Oracle rolled over Apache and Google’s objections to its Java plans in December, the scene was set for Apache to leave and, eventually, force a Java code fork. Tumblr explains daylong outage After experiencing an outage that started on Sunday afternoon and stretched through most of the day yesterday, Tumblr has explained what happened. Google demos Chrome OS, launches pilot program During a press briefing this week in San Francisco, Google launched the Chrome application store and demonstrated Chrome OS, its browser-centric netbook operating system. Don’t expect Spotify in U.S. this holiday season As of last week, Spotify had yet to sign a single licensing deal with a major label, after spending more than a year negotiating, multiple music sources told CNET. December 2010 Patch Tuesday will come with most bulletins ever According to the Microsoft Security Response Center, Microsoft will issue 17 Security Bulletins addressing 40 vulnerabilities on Tuesday, December 14. It will also host a webcast to address customer questions the following day. Hacker plants back door in Symbian firmware Indian hacker Atul Alex has had a look at the firmware for Symbian S60 smartphones and come up with a back door for it. PC quarantines raise tough complexities The concept of quarantining PCs to prevent widespread infection is “interesting, but difficult to implement, with far too many problems”, said security experts. Symantec: DDoS attacks hard to defend It has surfaced that the distributed denial of service (DDoS) attacks on Visa and MasterCard Web sites on Wednesday were carried out by a toolkit known as low orbit ion cannon (LOIC). Web Sockets and the risks of unfinished standards Enthusiasm for a promising new standard called Web Sockets has quickly cooled in some quarters as a potential security problem led some browser makers to hastily postpone support. Internet Explorer 9 to get tracking protection Microsoft is making changes to Internet Explorer 9’s security features that will better enable users to keep sites from tracking their activity across browsing sessions. NASA sold PCs with sensitive data NASA failed to remove sensitive data from computers that it sold, according to an audit report released this week. Cybercrooks create fake Amazon receipts The bad guys have created yet another online scam, this one involving fake Amazon receipts. World of Warcraft character move fees waived Until December 22, Blizzard will allow free realm transfers from 25 highly populated servers to alleviate log-in queues or performance issues. (The free transfers are one-way and one-time only.) SpaceX Dragon reaches orbit atop a Falcon with a fiery tail The Space Exploration Technologies corporation has become the first nongovernmental entity to put a vehicle into low Earth orbit. Geek Video of the Week If birds have wings, then why are the Angry Birds using slingshots? Photo by Dorkly Bits. Wait… Birds have Wings, Why are the Angry Ones Using Slingshots? Sysadmin Geek Tips How To Setup Email Alerts on Linux Using Gmail or SMTP Linux machines may require administrative intervention in countless ways, but without manually logging into them how would you know about it? Here’s how to setup emails to get notified when your machines want some tender love and attention. Random TinyHacker Links Red Panda Webcam Support Firefox and the Knoxville Zoo’s Red Panda program. Christmas Icons (Icons we like) Superb set of holiday icons by lgp85 at deviantArt. Download the .zip and use as .png or convert to .ico at Convertico.com or with tiny app Imagicon. Super User Questions Enjoy reading the great answers to this week’s popular questions from Super User Useful USB boot disks? DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder? What are other ways to backup my files if I do not have an external drive? Anti virus what is the difference between these all? How can I block all Facebook elements/content? How-To Geek Weekly Article Recap Have you had a busy week between work and preparing for the holidays? Get caught up on your HTG reading with our hottest articles of the week. 20 Windows Keyboard Shortcuts You Might Not Know The 50 Best Registry Hacks that Make Windows Better LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology HTG Explains: Which Linux File System Should You Choose? How to Use and Customize Google Chrome Web Apps One Year Ago on How-To Geek This week’s batch of retro geeky goodness is all about customizing Windows 7. ClassicShell Adds Classic Start Menu and Explorer Features to Windows 7 Get an Aero-Styled Classic Start Menu in Windows 7 Customize the Windows 7 Logon Screen Get the Classic Style Network Activity Indicator Back in Windows 7 How To Enable Check Boxes for Items In Windows 7 The Geek Note We would like you to join us in welcoming Jason Fitzpatrick to the writing staff here at How-To Geek. He started with us this past week, so take some time to read through his articles about the Wii, Kindle, & PlayStation 2 Peripherals and leave a friendly comment to say “Hi”! Got a great tip to share? Make sure to send it in to us at [email protected]. Photo by real00. Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

  Read the article

• General monitoring for SQL Server Analysis Services using Performance Monitor

  - by Testas

  A recent customer engagement required a setup of a monitoring solution for SSAS, due to the time restrictions placed upon this, native Windows Performance Monitor (Perfmon) and SQL Server Profiler Monitoring Tools was used as using a third party tool would have meant the customer providing an additional monitoring server that was not available.I wanted to outline the performance monitoring counters that was used to monitor the system on which SSAS was running. Due to the slow query performance that was occurring during certain scenarios, perfmon was used to establish if any pressure was being placed on the Disk, CPU or Memory subsystem when concurrent connections access the same query, and Profiler to pinpoint how the query was being managed within SSAS, profiler I will leave for another blogThis guide is not designed to provide a definitive list of what should be used when monitoring SSAS, different situations may require the addition or removal of counters as presented by the situation. However I hope that it serves as a good basis for starting your monitoring of SSAS. I would also like to acknowledge Chris Webb’s awesome chapters from “Expert Cube Development” that also helped shape my monitoring strategy:http://cwebbbi.spaces.live.com/blog/cns!7B84B0F2C239489A!6657.entrySimulating ConnectionsTo simulate the additional connections to the SSAS server whilst monitoring, I used ascmd to simulate multiple connections to the typical and worse performing queries that were identified by the customer. A similar sript can be downloaded from codeplex at http://www.codeplex.com/SQLSrvAnalysisSrvcs.     File name: ASCMD_StressTestingScripts.zip. Performance MonitorWithin performance monitor,  a counter log was created that contained the list of counters below. The important point to note when running the counter log is that the RUN AS property within the counter log properties should be changed to an account that has rights to the SSAS instance when monitoring MSAS counters. Failure to do so means that the counter log runs under the system account, no errors or warning are given while running the counter log, and it is not until you need to view the MSAS counters that they will not be displayed if run under the default account that has no right to SSAS. If your connection simulation takes hours, this could prove quite frustrating if not done beforehand JThe counters used……  Object Counter Instance Justification System Processor Queue legnth N/A Indicates how many threads are waiting for execution against the processor. If this counter is consistently higher than around 5 when processor utilization approaches 100%, then this is a good indication that there is more work (active threads) available (ready for execution) than the machine's processors are able to handle. System Context Switches/sec N/A Measures how frequently the processor has to switch from user- to kernel-mode to handle a request from a thread running in user mode. The heavier the workload running on your machine, the higher this counter will generally be, but over long term the value of this counter should remain fairly constant. If this counter suddenly starts increasing however, it may be an indicating of a malfunctioning device, especially if the Processor\Interrupts/sec\(_Total) counter on your machine shows a similar unexplained increase Process % Processor Time sqlservr Definately should be used if Processor\% Processor Time\(_Total) is maxing at 100% to assess the effect of the SQL Server process on the processor Process % Processor Time msmdsrv Definately should be used if Processor\% Processor Time\(_Total) is maxing at 100% to assess the effect of the SQL Server process on the processor Process Working Set sqlservr If the Memory\Available bytes counter is decreaing this counter can be run to indicate if the process is consuming larger and larger amounts of RAM. Process(instance)\Working Set measures the size of the working set for each process, which indicates the number of allocated pages the process can address without generating a page fault. Process Working Set msmdsrv If the Memory\Available bytes counter is decreaing this counter can be run to indicate if the process is consuming larger and larger amounts of RAM. Process(instance)\Working Set measures the size of the working set for each process, which indicates the number of allocated pages the process can address without generating a page fault. Processor % Processor Time _Total and individual cores measures the total utilization of your processor by all running processes. If multi-proc then be mindful only an average is provided Processor % Privileged Time _Total To see how the OS is handling basic IO requests. If kernel mode utilization is high, your machine is likely underpowered as it's too busy handling basic OS housekeeping functions to be able to effectively run other applications. Processor % User Time _Total To see how the applications is interacting from a processor perspective, a high percentage utilisation determine that the server is dealing with too many apps and may require increasing thje hardware or scaling out Processor Interrupts/sec _Total  The average rate, in incidents per second, at which the processor received and serviced hardware interrupts. Shoulr be consistant over time but a sudden unexplained increase could indicate a device malfunction which can be confirmed using the System\Context Switches/sec counter Memory Pages/sec N/A Indicates the rate at which pages are read from or written to disk to resolve hard page faults. This counter is a primary indicator of the kinds of faults that cause system-wide delays, this is the primary counter to watch for indication of possible insufficient RAM to meet your server's needs. A good idea here is to configure a perfmon alert that triggers when the number of pages per second exceeds 50 per paging disk on your system. May also want to see the configuration of the page file on the Server Memory Available Mbytes N/A is the amount of physical memory, in bytes, available to processes running on the computer. if this counter is greater than 10% of the actual RAM in your machine then you probably have more than enough RAM. monitor it regularly to see if any downward trend develops, and set an alert to trigger if it drops below 2% of the installed RAM. Physical Disk Disk Transfers/sec for each physical disk If it goes above 10 disk I/Os per second then you've got poor response time for your disk. Physical Disk Idle Time _total If Disk Transfers/sec is above  25 disk I/Os per second use this counter. which measures the percent time that your hard disk is idle during the measurement interval, and if you see this counter fall below 20% then you've likely got read/write requests queuing up for your disk which is unable to service these requests in a timely fashion. Physical Disk Disk queue legnth For the OLAP and SQL physical disk A value that is consistently less than 2 means that the disk system is handling the IO requests against the physical disk Network Interface Bytes Total/sec For the NIC Should be monitored over a period of time to see if there is anb increase/decrease in network utilisation Network Interface Current Bandwidth For the NIC is an estimate of the current bandwidth of the network interface in bits per second (BPS). MSAS 2005: Memory Memory Limit High KB N/A Shows (as a percentage) the high memory limit configured for SSAS in C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config\msmdsrv.ini MSAS 2005: Memory Memory Limit Low KB N/A Shows (as a percentage) the low memory limit configured for SSAS in C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Config\msmdsrv.ini MSAS 2005: Memory Memory Usage KB N/A Displays the memory usage of the server process. MSAS 2005: Memory File Store KB N/A Displays the amount of memory that is reserved for the Cache. Note if total memory limit in the msmdsrv.ini is set to 0, no memory is reserved for the cache MSAS 2005: Storage Engine Query Queries from Cache Direct / sec N/A Displays the rate of queries answered from the cache directly MSAS 2005: Storage Engine Query Queries from Cache Filtered / Sec N/A Displays the Rate of queries answered by filtering existing cache entry. MSAS 2005: Storage Engine Query Queries from File / Sec N/A Displays the Rate of queries answered from files. MSAS 2005: Storage Engine Query Average time /query N/A Displays the average time of a query MSAS 2005: Connection Current connections N/A Displays the number of connections against the SSAS instance MSAS 2005: Connection Requests / sec N/A Displays the rate of query requests per second MSAS 2005: Locks Current Lock Waits N/A Displays thhe number of connections waiting on a lock MSAS 2005: Threads Query Pool job queue Length N/A The number of queries in the job queue MSAS 2005:Proc Aggregations Temp file bytes written/sec N/A Shows the number of bytes of data processed in a temporary file MSAS 2005:Proc Aggregations Temp file rows written/sec N/A Shows the number of bytes of data processed in a temporary file 

  Read the article

• Java Cloud Service Integration using Web Service Data Control

  - by Jani Rautiainen

  Java Cloud Service (JCS) provides a platform to develop and deploy business applications in the cloud. In Fusion Applications Cloud deployments customers do not have the option to deploy custom applications developed with JDeveloper to ensure the integrity and supportability of the hosted application service. Instead the custom applications can be deployed to the JCS and integrated to the Fusion Application Cloud instance.This series of articles will go through the features of JCS, provide end-to-end examples on how to develop and deploy applications on JCS and how to integrate them with the Fusion Applications instance.In this article a custom application integrating with Fusion Application using Web Service Data Control will be implemented. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Pre-requisites Access to Cloud instance In order to deploy the application access to a JCS instance is needed, a free trial JCS instance can be obtained from Oracle Cloud site. To register you will need a credit card even if the credit card will not be charged. To register simply click "Try it" and choose the "Java" option. The confirmation email will contain the connection details. See this video for example of the registration. Once the request is processed you will be assigned 2 service instances; Java and Database. Applications deployed to the JCS must use Oracle Database Cloud Service as their underlying database. So when JCS instance is created a database instance is associated with it using a JDBC data source. The cloud services can be monitored and managed through the web UI. For details refer to Getting Started with Oracle Cloud. JDeveloper JDeveloper contains Cloud specific features related to e.g. connection and deployment. To use these features download the JDeveloper from JDeveloper download site by clicking the “Download JDeveloper 11.1.1.7.1 for ADF deployment on Oracle Cloud” link, this version of JDeveloper will have the JCS integration features that will be used in this article. For versions that do not include the Cloud integration features the Oracle Java Cloud Service SDK or the JCS Java Console can be used for deployment. For details on installing and configuring the JDeveloper refer to the installation guide. For details on SDK refer to Using the Command-Line Interface to Monitor Oracle Java Cloud Service and Using the Command-Line Interface to Manage Oracle Java Cloud Service. Create Application In this example the “JcsWsDemo” application created in the “Java Cloud Service Integration using Web Service Proxy” article is used as the base. Create Web Service Data Control In this example we will use a Web Service Data Control to integrate with Credit Rule Service in Fusion Applications. The data control will be used to query data from Fusion Applications using a web service call and present the data in a table. To generate the data control choose the “Model” project and navigate to "New -> All Technologies -> Business Tier -> Data Controls -> Web Service Data Control" and enter following: Name: CreditRuleServiceDC URL: https://ic-[POD].oracleoutsourcing.com/icCnSetupCreditRulesPublicService/CreditRuleService?WSDL Service: {{http://xmlns.oracle.com/apps/incentiveCompensation/cn/creditSetup/creditRule/creditRuleService/}CreditRuleService On step 2 select the “findRule” operation: Skip step 3 and on step 4 define the credentials to access the service. Do note that in this example these credentials are only used if testing locally, for JCS deployment credentials need to be manually updated on the EAR file: Click “Finish” and the proxy generation is done. Creating UI In order to use the data control we will need to populate complex objects FindCriteria and FindControl. For simplicity in this example we will create logic in a managed bean that populates the objects. Open “JcsWsDemoBean.java” and add the following logic: Map findCriteria; Map findControl; public void setFindCriteria(Map findCriteria) { this.findCriteria = findCriteria; } public Map getFindCriteria() { findCriteria = new HashMap(); findCriteria.put("fetchSize",10); findCriteria.put("fetchStart",0); return findCriteria; } public void setFindControl(Map findControl) { this.findControl = findControl; } public Map getFindControl() { findControl = new HashMap(); return findControl; } Open “JcsWsDemo.jspx”, navigate to “Data Controls -> CreditRuleServiceDC -> findRule(Object, Object) -> result” and drag and drop the “result” node into the “af:form” element in the page: On the “Edit Table Columns” remove all columns except “RuleId” and “Name”: On the “Edit Action Binding” window displayed enter reference to the java class created above by selecting “#{JcsWsDemoBean.findCriteria}”: Also define the value for the “findControl” by selecting “#{JcsWsDemoBean.findControl}”. Deploy to JCS For WS DC the authentication details need to be updated on the connection details before deploying. Open “connections.xml” by navigating “Application Resources -> Descriptors -> ADF META-INF -> connections.xml”: Change the user name and password entry from: <soap username="transportUserName" password="transportPassword" To match the access details for the target environment. Follow the same steps as documented in previous article ”Java Cloud Service ADF Web Application”. Once deployed the application can be accessed with URL: https://java-[identity domain].java.[data center].oraclecloudapps.com/JcsWsDemo-ViewController-context-root/faces/JcsWsDemo.jspx When accessed the first 10 rules in the system are displayed: Summary In this article we learned how to integrate with Fusion Applications using a Web Service Data Control in JCS. In future articles various other integration techniques will be covered. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

  Read the article

• Is it Possible to Query Multiple Databases with WCF Data Services?

  - by Mas

  I have data being inserted into multiple databases with the same schema. The multiple databases exist for performance reasons. I need to create a WCF service that a client can use to query the databases. However from the client's point of view, there is only 1 database. By this I mean when a client performs a query, it should query all databases and return the combined results. I also need to provide the flexibility for the client to define its own queries. Therefore I am looking into WCF Data Services, which provides the very nice functionality for client specified queries. So far, it seems that a DataService can only make a query to a single database. I found no override that would allow me to dispatch queries to multiple databases. Does anyone know if it is possible for a WCF Data Service to query against multiple databases with the same schema?

  Read the article

• The Sensemaking Spectrum for Business Analytics: Translating from Data to Business Through Analysis

  - by Joe Lamantia

  One of the most compelling outcomes of our strategic research efforts over the past several years is a growing vocabulary that articulates our cumulative understanding of the deep structure of the domains of discovery and business analytics. Modes are one example of the deep structure we’ve found.  After looking at discovery activities across a very wide range of industries, question types, business needs, and problem solving approaches, we've identified distinct and recurring kinds of sensemaking activity, independent of context.  We label these activities Modes: Explore, compare, and comprehend are three of the nine recognizable modes.  Modes describe *how* people go about realizing insights.  (Read more about the programmatic research and formal academic grounding and discussion of the modes here: https://www.researchgate.net/publication/235971352_A_Taxonomy_of_Enterprise_Search_and_Discovery) By analogy to languages, modes are the 'verbs' of discovery activity.  When applied to the practical questions of product strategy and development, the modes of discovery allow one to identify what kinds of analytical activity a product, platform, or solution needs to support across a spread of usage scenarios, and then make concrete and well-informed decisions about every aspect of the solution, from high-level capabilities, to which specific types of information visualizations better enable these scenarios for the types of data users will analyze. The modes are a powerful generative tool for product making, but if you've spent time with young children, or had a really bad hangover (or both at the same time...), you understand the difficult of communicating using only verbs.  So I'm happy to share that we've found traction on another facet of the deep structure of discovery and business analytics.  Continuing the language analogy, we've identified some of the ‘nouns’ in the language of discovery: specifically, the consistently recurring aspects of a business that people are looking for insight into.  We call these discovery Subjects, since they identify *what* people focus on during discovery efforts, rather than *how* they go about discovery as with the Modes. Defining the collection of Subjects people repeatedly focus on allows us to understand and articulate sense making needs and activity in more specific, consistent, and complete fashion.  In combination with the Modes, we can use Subjects to concretely identify and define scenarios that describe people’s analytical needs and goals.  For example, a scenario such as ‘Explore [a Mode] the attrition rates [a Measure, one type of Subject] of our largest customers [Entities, another type of Subject] clearly captures the nature of the activity — exploration of trends vs. deep analysis of underlying factors — and the central focus — attrition rates for customers above a certain set of size criteria — from which follow many of the specifics needed to address this scenario in terms of data, analytical tools, and methods. We can also use Subjects to translate effectively between the different perspectives that shape discovery efforts, reducing ambiguity and increasing impact on both sides the perspective divide.  For example, from the language of business, which often motivates analytical work by asking questions in business terms, to the perspective of analysis.  The question posed to a Data Scientist or analyst may be something like “Why are sales of our new kinds of potato chips to our largest customers fluctuating unexpectedly this year?” or “Where can innovate, by expanding our product portfolio to meet unmet needs?”.  Analysts translate questions and beliefs like these into one or more empirical discovery efforts that more formally and granularly indicate the plan, methods, tools, and desired outcomes of analysis.  From the perspective of analysis this second question might become, “Which customer needs of type ‘A', identified and measured in terms of ‘B’, that are not directly or indirectly addressed by any of our current products, offer 'X' potential for ‘Y' positive return on the investment ‘Z' required to launch a new offering, in time frame ‘W’?  And how do these compare to each other?”.  Translation also happens from the perspective of analysis to the perspective of data; in terms of availability, quality, completeness, format, volume, etc. By implication, we are proposing that most working organizations — small and large, for profit and non-profit, domestic and international, and in the majority of industries — can be described for analytical purposes using this collection of Subjects.  This is a bold claim, but simplified articulation of complexity is one of the primary goals of sensemaking frameworks such as this one.  (And, yes, this is in fact a framework for making sense of sensemaking as a category of activity - but we’re not considering the recursive aspects of this exercise at the moment.) Compellingly, we can place the collection of subjects on a single continuum — we call it the Sensemaking Spectrum — that simply and coherently illustrates some of the most important relationships between the different types of Subjects, and also illuminates several of the fundamental dynamics shaping business analytics as a domain.  As a corollary, the Sensemaking Spectrum also suggests innovation opportunities for products and services related to business analytics. The first illustration below shows Subjects arrayed along the Sensemaking Spectrum; the second illustration presents examples of each kind of Subject.  Subjects appear in colors ranging from blue to reddish-orange, reflecting their place along the Spectrum, which indicates whether a Subject addresses more the viewpoint of systems and data (Data centric and blue), or people (User centric and orange).  This axis is shown explicitly above the Spectrum.  Annotations suggest how Subjects align with the three significant perspectives of Data, Analysis, and Business that shape business analytics activity.  This rendering makes explicit the translation and bridging function of Analysts as a role, and analysis as an activity. Subjects are best understood as fuzzy categories [http://georgelakoff.files.wordpress.com/2011/01/hedges-a-study-in-meaning-criteria-and-the-logic-of-fuzzy-concepts-journal-of-philosophical-logic-2-lakoff-19731.pdf], rather than tightly defined buckets.  For each Subject, we suggest some of the most common examples: Entities may be physical things such as named products, or locations (a building, or a city); they could be Concepts, such as satisfaction; or they could be Relationships between entities, such as the variety of possible connections that define linkage in social networks.  Likewise, Events may indicate a time and place in the dictionary sense; or they may be Transactions involving named entities; or take the form of Signals, such as ‘some Measure had some value at some time’ - what many enterprises understand as alerts.   The central story of the Spectrum is that though consumers of analytical insights (represented here by the Business perspective) need to work in terms of Subjects that are directly meaningful to their perspective — such as Themes, Plans, and Goals — the working realities of data (condition, structure, availability, completeness, cost) and the changing nature of most discovery efforts make direct engagement with source data in this fashion impossible.  Accordingly, business analytics as a domain is structured around the fundamental assumption that sense making depends on analytical transformation of data.  Analytical activity incrementally synthesizes more complex and larger scope Subjects from data in its starting condition, accumulating insight (and value) by moving through a progression of stages in which increasingly meaningful Subjects are iteratively synthesized from the data, and recombined with other Subjects.  The end goal of  ‘laddering’ successive transformations is to enable sense making from the business perspective, rather than the analytical perspective.Synthesis through laddering is typically accomplished by specialized Analysts using dedicated tools and methods. Beginning with some motivating question such as seeking opportunities to increase the efficiency (a Theme) of fulfillment processes to reach some level of profitability by the end of the year (Plan), Analysts will iteratively wrangle and transform source data Records, Values and Attributes into recognizable Entities, such as Products, that can be combined with Measures or other data into the Events (shipment of orders) that indicate the workings of the business.  More complex Subjects (to the right of the Spectrum) are composed of or make reference to less complex Subjects: a business Process such as Fulfillment will include Activities such as confirming, packing, and then shipping orders.  These Activities occur within or are conducted by organizational units such as teams of staff or partner firms (Networks), composed of Entities which are structured via Relationships, such as supplier and buyer.  The fulfillment process will involve other types of Entities, such as the products or services the business provides.  The success of the fulfillment process overall may be judged according to a sophisticated operating efficiency Model, which includes tiered Measures of business activity and health for the transactions and activities included.  All of this may be interpreted through an understanding of the operational domain of the businesses supply chain (a Domain).   We'll discuss the Spectrum in more depth in succeeding posts.

  Read the article

• CREATE DATABASE permission denied in database 'master'.

  - by MuraliVijay CSK

  I have used this connection string to connect my database.... <connectionStrings> <add name="connectionString" connectionString="Data Source=.\SQLEXPRESS;AttachDbFilename=C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\Taxi.mdf;Database=Taxi;Trusted_Connection=Yes;" providerName="System.Data.SqlClient"/> i got this error while running in IIS Exception Details: System.Data.SqlClient.SqlException: CREATE DATABASE permission denied in database 'master'. Cannot attach the file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\Taxi.mdf' as database 'Taxi'.

  Read the article

• Exchange 2010 POP3/IMAP4/Transport services complaining that they can't find SSL certificate after blue screen

  - by Graeme Donaldson

  We have a single-server Exchange 2010 setup. In the early hours of this morning the server had a blue screen and rebooted. After coming back up the POP3/IMAP4 and Transport services are complaining that they cannot find the correct SSL certificate for mail.example.com. POP3: Log Name: Application Source: MSExchangePOP3 Date: 2012/04/23 11:45:15 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. SSL or TLS encryption can't be made to the POP3 service. IMAP4: Log Name: Application Source: MSExchangeIMAP4 Date: 2012/04/23 08:30:44 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. Neither SSL or TLS encryption can be made to the IMAP service. Transport: Log Name: Application Source: MSExchangeTransport Date: 2012/04/23 08:32:27 AM Event ID: 12014 Task Category: TransportService Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: Microsoft Exchange could not find a certificate that contains the domain name mail.example.com in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Default EXCH01 with a FQDN parameter of mail.example.com. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. The odd part is that Get-ExchangeCertificate show the cert as enabled for all the relevant services, and OWA is working flawlessly using this certificate. [PS] C:\Users\graeme\Desktop>Get-ExchangeCertificate Thumbprint Services Subject ---------- -------- ------- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ....S. CN=exch01 YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY ....S. CN=exch01 ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ IP.WS. CN=mail.example.com, OU=Domain Control Validated, O=mail.exa... Here's the certificate in the computer account's personal cert store: Does anyone have any pointers for getting POP3/IMAP4/SMTP to use the cert again?

  Read the article

• Sharepoint/WSS Reporting Services Integration woes

  - by mhollers

  after a number of failed attempts i seem to have successfully installed the Reporting services add-in to my WSS farm. However, I seem to be missing most of the enhanced functionality eg no report library template, no report center site template. the only additional functionality available is the report viewer web part. background: 2 server WSS 3.0 farm with CA (Central admin) WFE (web front end) and reporting services addin installed on 1, and SQL05 SP2 with Reporting services (RS) and all databases installed on other. I have a VM environment set up and have rolled this back and repeated a number of times. I have configured RS within CA and activated 'Report Server INtegration Feature'. Within the 'site settings' I have a 'Reporting Services' heading with a 'manage shared schedules' item/link, not sure if there should be other options? I was of the understanding that to view reports within sharepoint i could either create a new site using the 'report center' template or add a report library to an existing site, neither of which seems available I am at a loss as to what to do, as all online information seems to do with dealing with installation issues/errors, which i seem to have eventually got past

  Read the article

• Enterprise Redirection Services?

  - by Aaron Alton

  This is probably a case of "if I new what it was called, I could google it in 5 minutes" - but I don't know what it's called. It's probably best to explain the requirement using an example. We have a number of services (vpn, owa, etc) which we host from one of our datacenters. We have a number of datacenters, and we technically have the infrastructure already in place to support these services at a number of our datacenters. To provide access to these "services", I would create an external DNS entry (ex. VPN.MyCompany.com Gateway IP for one of my DCs), and clients will connect to it via the DNS entry. Since I have multiple datacenters that can support this service, I could theoretically offer a "highly available, geographically dispersed" solution if I could point this DNS entry to some sort of third party who offers highly available "redirection" services. If my primary site goes down, I could just make a change via some management console and configure the redirector to point to a different DC. Of course, it would be fairly straightforward to set this sort of thing up on one of our servers, but that would kinda defeat the purpose of a highly available third party. Is anyone familiar with a service like this? I'm thinking something like DynDNS, but with Enterprise availability guarantees.

  Read the article

• Applying Interactive Sorting to Multiple Columns in Reporting Services

  - by smisner

  A nice feature that appeared first in SQL Server 2008 is the ability to allow the user to click a column header to sort that column. It defaults to an ascending sort first, but you can click the column again to switch to a descending sort. You can learn more about interactive sorts in general at the Adding Interactive Sort to a Data Region in Books Online. Not mentioned in the article is how to apply interactive sorting to multiple columns, hence the reason for this post! Let’s say that I have a simple table like this: To enable interactive sorting, I open the Text Box properties for each of the column headers – the ones in the top row. Here’s an example of how I set up basic interactive sorting: Now when I preview the report, I see icons appear in each text box on the header row to indicate that interactive sorting is enabled. The initial sort order that displays when you preview the report depends on how you design the report. In this case, the report sorts by Sales Territory Group first, and then by Calendar Year. Interactive sorting overrides the report design. So let’s say that I want to sort first by Calendar Year, and then by Sales Territory Group. To do this, I click the arrow to the right of Calendar Year, and then, while pressing the Shift key, I click the arrow to the right of Sales Territory Group twice (once for ascending order and then a second time for descending order). Now my report looks like this: This technique only seems to work when you have a minimum of three columns configured with interactive sorting. If I remove the property from one of the columns in the above example, and try to use the interactive sorting on the remaining two columns, I can sort only the first column. The sort on the second column gets ignored. I don’t know if that’s by design or a bug, but I do know that’s what I’m experiencing when I try it out!

  Read the article

• VPN issue: SSTP Service service started and then stopped

  - by Ampersand

  When I was trying to set up a VPN connect on my laptop running Windows 7 Ultimate, I got this error: Network Connections Cannot load the Remote Access Connection Manager service. Error 711: The operation could not finish because it could not start the Remote Access Connection Manager service in time. Please try the operation again. I traced through some service dependencies and discovered that Secure Socket Tunneling Protocol Service was set to Manual. However, when I try to manually start the service, I get: Services The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Setting all the services involved to Automatic did not help. SSTP just showed Automatic and Stopped in the Services panel. I found a solution that involved booting in Safe Mode and deleting the contents of C:\Windows\System32\LogFiles\WMI\RtBackup. This solution worked, and I could set up a vpn connection, but only until I rebooted again. TL;DR I'm looking for a way to permanently enable Secure Socket Tunneling Protocol Service and other vpn-related services permanently so I don't have to reboot into safe mode and delete files every time I need to connect to a vpn.

  Read the article

• What is the correct approach i should use for an application that requires amazon S3 uploads and SimpleDB data management?

  - by Luis Oscar

  I am developing an application for iOS and that is going smoothly, the problem is that I am very new at server sided things. I am totally confused about how to correctly use Amazon Web Services for this purpose. What I want to do is very simple. I want my application to be able to query a servlet hosted in EC2 to be able to retrieve pictures and data based on some criteria from S3 and SImpleDB respectively. Also the application should be able to upload pictures into a S3 bucket and register the information in the SImpleDB. My main concerns are security and costs, So far i was using Amazon Token Vending Machine but I haven't been successful when trying to customize it, and while researching I discovered that on the long run it is very expensive. The ultimate goal is to handle a "social" picture service for my iOS application. Being able to register new users, authenticate these users. See what permissions they have to which pictures from the bucked. And all this without having to worry about Third party people from accessing the private pictures of my users. Sorry for this question but I am really clueless about how to handle this... I have tried reading many articles but all these server stuff looks very scary.

  Read the article

• pgpool2+streaming replication failover on only 2 servers?

  - by aneez

  I am trying to configure pgpool2 and postgresql 9.1 to handle failover. I currently have streaming replication running, and are using pgpool2 for read-only load balancing. I have 2 servers in my setup, both running postgresql - 1 master and 1 slave. The master is also running pgpool2. My question is how do I configure this setup to handle failover? Specifically in the case that the master crashes, and the slave has to take over and run pgpool2 as well. Most documentation and examples I have been able to find assumes that pgpool2 is running on a separate server and thus "never" crashes. I may or may not be attacking the problem using the wrong tools. In my production setup I have a total of 3 identical servers all in independent locations. The main goal of the setup is to achieve a high uptime. Thus failover should be automatic, and bringing a failed node back up should cause only minimal downtime. I want all 3 nodes to be as close to identical as possible, and be able to run with just 1 or 2 nodes available. And if possible I want to use load balancing to improve performance. If anyone can help me gain some insight into how to do this using my current setup or suggest a different/better setup. Thank you!

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >