protected mode - Page 133

Installing Lubuntu 14.04.1 forcepae fails

- by Rantanplan

I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

Read the article

ActiveX component can't create Object Error? Check 64 bit Status

- by Rick Strahl

If you're running on IIS 7 and a 64 bit operating system you might run into the following error using ASP classic or ASP.NET with COM interop. In classic ASP applications the error will show up as: ActiveX component can't create object (Error 429) (actually without error handling the error just shows up as 500 error page) In my case the code that's been giving me problems has been a FoxPro COM object I'd been using to serve banner ads to some of my pages. The code basically looks up banners from a database table and displays them at random. The ASP classic code that uses it looks like this: <% Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> Originally this code had no specific error checking as above so the ASP pages just failed with 500 error pages from the Web server. To find out what the problem is this code is more useful at least for debugging: <% ON ERROR RESUME NEXT Set banner = Server.CreateObject("wwBanner.aspBanner") Response.Write(err.Number & " - " & err.Description) banner.BannerFile = "wwsitebanners" Response.Write(banner.GetBanner(-1)) %> which results in: 429 - ActiveX component can't create object which at least gives you a slight clue. In ASP.NET invoking the same COM object with code like this: <% dynamic banner = wwUtils.CreateComInstance("wwBanner.aspBanner") as dynamic; banner.cBANNERFILE = "wwsitebanners"; Response.Write(banner.getBanner(-1)); %> results in: Retrieving the COM class factory for component with CLSID {B5DCBB81-D5F5-11D2-B85E-00600889F23B} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)). The class is in fact registered though and the COM server loads fine from a command prompt or other COM client. This error can be caused by a COM server that doesn't load. It looks like a COM registration error. There are a number of traditional reasons why this error can crop up of course. The server isn't registered (run regserver32 to register a DLL server or /regserver on an EXE server) Access permissions aren't set on the COM server (Web account has to be able to read the DLL ie. Network service) The COM server fails to load during initialization ie. failing during startup One thing I always do to check for COM errors fire up the server in a COM client outside of IIS and ensure that it works there first - it's almost always easier to debug a server outside of the Web environment. In my case I tried the server in Visual FoxPro on the server with: loBanners = CREATEOBJECT("wwBanner.aspBanner") loBanners.cBannerFile = "wwsitebanners" ? loBanners.GetBanner(-1) and it worked just fine. If you don't have a full dev environment on the server you can also use VBScript do the same thing and run the .vbs file from the command prompt: Set banner = Server.CreateObject("wwBanner.aspBanner") banner.BannerFile = "wwsitebanners" MsgBox(banner.getBanner(-1)) Since this both works it tells me the server is registered and working properly. This leaves startup failures or permissions as the problem. I double checked permissions for the Application Pool and the permissions of the folder where the DLL lives and both are properly set to allow access by the Application Pool impersonated user. Just to be sure I assigned an Admin user to the Application Pool but still no go. So now what? 64 bit Servers Ahoy A couple of weeks back I had set up a few of my Application pools to 64 bit mode. My server is Server 2008 64 bit and by default Application Pools run 64 bit. Originally when I installed the server I set up most of my Application Pools to 32 bit mainly for backwards compatibility. But as more of my code migrates to 64 bit OS's I figured it'd be a good idea to see how well code runs under 64 bit code. The transition has been mostly painless. Until today when I noticed the problem with the code above when scrolling to my IIS logs and noticing a lot of 500 errors on many of my ASP classic pages. The code in question in most of these pages deals with this single simple COM object. It took a while to figure out that the problem is caused by the Application Pool running in 64 bit mode. The issue is that 32 bit COM objects (ie. my old Visual FoxPro COM component) cannot be loaded in a 64 bit Application Pool. The ASP pages using this COM component broke on the day I switched my main Application Pool into 64 bit mode but I didn't find the problem until I searched my logs for errors by pure chance. To fix this is easy enough once you know what the problem is by switching the Application Pool to Enable 32-bit Applications: Once this is done the COM objects started working correctly again. 64 bit ASP and ASP.NET with DCOM Servers This is kind of off topic, but incidentally it's possible to load 32 bit DCOM (out of process) servers from ASP.NET and ASP classic even if those applications run in 64 bit application pools. In fact, in West Wind Web Connection I use this capability to run a 64 bit ASP.NET handler that talks to a 32 bit FoxPro COM server which allows West Wind Web Connection to run in native 64 bit mode without custom configuration (which is actually quite useful). It's probably not a common usage scenario but it's good to know that you can actually access 32 bit COM objects this way from ASP.NET. For West Wind Web Connection this works out well as the DCOM interface only makes one non-chatty call to the backend server that handles all the rest of the request processing. Application Pool Isolation is your Friend For me the recent incident of failure in the classic ASP pages has just been another reminder to be very careful with moving applications to 64 bit operation. There are many little traps when switching to 64 bit that are very difficult to track and test for. I described one issue I had a couple of months ago where one of the default ASP.NET filters was loading the wrong version (32bit instead of 64bit) which was extremely difficult to track down and was caused by a very sneaky configuration switch error (basically 3 different entries for the same ISAPI filter all with different bitness settings). It took me almost a full day to track this down). Recently I've been taken to isolate individual applications into separate Application Pools rather than my past practice of combining many apps into shared AppPools. This is a good practice assuming you have enough memory to make this work. Application Pool isolate provides more modularity and allows me to selectively move applications to 64 bit. The error above came about precisely because I moved one of my most populous app pools to 64 bit and forgot about the minimal COM object use in some of my old pages. It's easy to forget. To 64bit or Not Is it worth it to move to 64 bit? Currently I'd say -not really. In my - admittedly limited - testing I don't see any significant performance increases. In fact 64 bit apps just seem to consume considerably more memory (30-50% more in my pools on average) and performance is minimally improved (less than 5% at the very best) in the load testing I've performed on a couple of sites in both modes. The only real incentive for 64 bit would be applications that require huge data spaces that exceed the 32 bit 4 gigabyte memory limit. However I have a hard time imagining an application that needs 4 gigs of memory in a single Application Pool :-). Curious to hear other opinions on benefits of 64 bit operation. © Rick Strahl, West Wind Technologies, 2005-2011Posted in COM ASP.NET FoxPro

Read the article

Our Look at Opera 10.50 Web Browser

- by Asian Angel

Everyone has been talking about the newest version of Opera recently but perhaps you have not looked at it too closely yet. Today we will take a look at 10.50 and let you see what this “new browser” is all about. The New Engines Carakan JavaScript Engine: Runs web applications up to 7 times faster than its predecessor Futhark Vega Graphics Library: Enables super fast and smooth graphics on everything from tab switching to webpage animation Presto 2.5: Provides support for HTML5, CSS2.1 and the latest CSS3 standards A Look at the Features Available If you have installed or used older versions of Opera before then the default look after a clean install will probably seem rather different. The main differences in appearance are mainly located within the “glass border” areas of the browser. The “Speed Dial” setup looks and works just as well as in previous versions. You can set a favorite wallpaper or image as your background and choose the number of “dials” using the “Configure Speed Dial Command”. One of the “standout” differences is the “O Button”. All of the menus have been condensed into this single access point but it only takes a few moments to find what you are looking for. If you have used the style before in earlier versions of Opera some of the items have been moved around. For those who prefer the “Menu Bar” that can be easily restored using the “Show Menu Bar Command”. If desired you can actually “extend” the “Tab Bar” downwards to display thumbnails of your open tabs. Just use your mouse to grab the bottom of the “Tab Bar” and adjust it to suit your personal needs. The only problem with this feature is that it will quickly use up a good sized portion of your available UI and browser window space. The “Password Manager” is ready to access when needed…the background for the button will turn a shiny metallic blue when you open a webpage that you have “Login Information” saved for. One of the new features is a small “Recycle Bin Button” in the upper right corner. Clicking on this will display a list of recently closed tabs letting you have easy access to any tabs that you may have accidentally closed. This is definitely a great feature to have as an easy access button. For those who were used to how the “Zoom Feature” looked before it has a new “look” to it. Instead of the pop-up menu-type listing of “view sizes” present before you now have a slider button that you can use to adjust the zooming level. For our default setup here the “Sidebar Panels” available were: “Bookmarks, Widgets, Unite, Notes, Downloads, History, & Panels”. Additional panels such as “Links, Windows, Search, Info, etc.” are available if you want and/or need them (accessible using the “Panels Plus Sign Button”). The “Opera Link Button” makes it easy for you to synchronize your “Speed Dial, Bookmarks, Personal Bar, Custom Searches, History & Notes”. Note: “Opera Link” requires an account and can be signed up for using the link provided below. Want to share files with your family and friends? “Unite” allows you to do that and more. With “Unite” you can: “Stream Music, Show Photo Galleries, Share Files and/or Folders, & host webpages directly from your browser”. We have a more in-depth look at “Unite” in our article here. Note: Use of “Unite” requires an Opera account. Got a slow internet connection? “Opera Turbo” can help with that by running the web traffic through their “compression servers” to speed up your web browsing. Keep in mind that “Opera Turbo” will not engage if you are accessing a secure website (i.e. your bank’s website) thus preserving your security. Note: “Opera Turbo” can be set up to automatically detect slow internet connections (i.e. crowded Wi-Fi in a cafe). Opera has a built-in “Private Browsing Mode” now for those who prefer anonymous browsing and want to keep the “history records clean” on their computer. To access it go to “Tabs and windows” and select “New private tab” or “New private window” as desired. When you open your new “Private Tab or Window” you will see the following message with details on how Opera will handle browsing information and a large “door hanger symbol”. Notice that the one tab is locked into “Private Browsing Mode” while the others are still working in “Regular Browsing Mode”. Very nice! A miniature version of the “door hanger symbol” will be present on any tab that is locked into “Private Browsing Mode”. If you are using Windows 7 then you will love how things look from your “Taskbar”. Here you can see four very nice looking thumbnails for the tabs that we had open. All that you have to do is click on the desired thumbnail… The “Context Menu” looks just as lovely as the thumbnails and definitely has some terrific functionality built into it. Add Enhanced Aero Capability If you love “Aero” and want more for your new Opera install then we have the perfect theme for you. The theme’s name is Z1-AV69 and once you have downloaded it you will need to place it in the “Skins Subfolder” in Opera’s “Program Files Folder”. Note: For our example we used version 1.10 but version 2.00 is now available (link provided below). Once you have restarted Opera, go to the “O Menu” and select “Appearance”. When the “Appearance Window” opens click on “Z1-Glass Skin” and then click “OK”. All of a sudden you will have more “Aero Goodness” to enjoy. Compare this screenshot with the one at the top of this article…the only part that is not transparent now is the browser window area itself. Want even more “Aero Goodness”? Right click on the “Tab Bar” and set “Tab Bar Placement” to “Left”. Note: You can achieve the same effect by setting the “Tab Bar Placement” to “Right”. With the “Speed Dial” visible you will be able to see your wallpaper with ease. While this is obviously not for everyone it does make for a great visual trick. Portable Versions Perhaps you need this wonderful new version of Opera to go with you wherever you do during the day. Not a problem…just visit the Opera USB website to choose a version that works best for you. You can select from “Zip or Exe” setup files and if needed update an older portable version using a “Zipped Update Files Package”. If you are updating an older version keep in mind that you will need to delete the old “OperaUSB.exe. File” due to changes with the new setup files. During our tests updating older portable versions went well for the most part but we did experience a few “odd UI quirks” here and there…so we recommend setting up a clean install if possible. Conclusion The new 10.50 release is a pleasure to use and is a recommended install for your system. Whether you are considering trying Opera for the first time or have been using it for a bit we think that you will pleased with everything that the 10.50 release has to offer. For those who would like to add User Scripts to Opera be certain to look at our how-to article here. Links Download Opera 10.50 for your location (Windows) Get the latest Snapshot versions for Linux & Mac Sign up for an Opera Link account View In-Depth detail on Opera 10.50’s features Download the Z1-AV69 Aero Theme Download Portable Opera 10.50 Similar Articles Productive Geek Tips Set the Speed Dial as the Opera Startup PageSet Up User Scripts in Opera BrowserScan Files for Viruses Before You Download With Dr.WebTurn Your Computer into a File, Music, and Web Server with Opera UniteSet the Default Browser on Ubuntu From the Command Line TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

Read the article

Enabling Kerberos Authentication for Reporting Services

- by robcarrol

Recently, I’ve helped several customers with Kerberos authentication problems with Reporting Services and Analysis Services, so I’ve decided to write this blog post and pull together some useful resources in one place (there are 2 whitepapers in particular that I found invaluable configuring Kerberos authentication, and these can be found in the references section at the bottom of this post). In most of these cases, the problem has manifested itself with the Login failed for User ‘NT Authority\Anonymous’ (“double-hop”) error. By default, Reporting Services uses Windows Integrated Authentication, which includes the Kerberos and NTLM protocols for network authentication. Additionally, Windows Integrated Authentication includes the negotiate security header, which prompts the client to select Kerberos or NTLM for authentication. The client can access reports which have the appropriate permissions by using Kerberos for authentication. Servers that use Kerberos authentication can impersonate those clients and use their security context to access network resources. You can configure Reporting Services to use both Kerberos and NTLM authentication; however this may lead to a failure to authenticate. With negotiate, if Kerberos cannot be used, the authentication method will default to NTLM. When negotiate is enabled, the Kerberos protocol is always used except when: Clients/servers that are involved in the authentication process cannot use Kerberos. The client does not provide the information necessary to use Kerberos. An in-depth discussion of Kerberos authentication is beyond the scope of this post, however when users execute reports that are configured to use Windows Integrated Authentication, their logon credentials are passed from the report server to the server hosting the data source. Delegation needs to be set on the report server and Service Principle Names (SPNs) set for the relevant services. When a user processes a report, the request must go through a Web server on its way to a database server for processing. Kerberos authentication enables the Web server to request a service ticket from the domain controller; impersonate the client when passing the request to the database server; and then restrict the request based on the user’s permissions. Each time a server is required to pass the request to another server, the same process must be used. Kerberos authentication is supported in both native and SharePoint integrated mode, but I’ll focus on native mode for the purpose of this post (I’ll explain configuring SharePoint integrated mode and Kerberos authentication in a future post). Configuring Kerberos avoids the authentication failures due to double-hop issues. These double-hop errors occur when a users windows domain credentials can’t be passed to another server to complete the user’s request. In the case of my customers, users were executing Reporting Services reports that were configured to query Analysis Services cubes on a separate machine using Windows Integrated security. The double-hop issue occurs as NTLM credentials are valid for only one network hop, subsequent hops result in anonymous authentication. The client attempts to connect to the report server by making a request from a browser (or some other application), and the connection process begins with authentication. With NTLM authentication, client credentials are presented to Computer 2. However Computer 2 can’t use the same credentials to access Computer 3 (so we get the Anonymous login error). To access Computer 3 it is necessary to configure the connection string with stored credentials, which is what a number of customers I have worked with have done to workaround the double-hop authentication error. However, to get the benefits of Windows Integrated security, a better solution is to enable Kerberos authentication. Again, the connection process begins with authentication. With Kerberos authentication, the client and the server must demonstrate to one another that they are genuine, at which point authentication is successful and a secure client/server session is established. In the illustration above, the tiers represent the following: Client tier (computer 1): The client computer from which an application makes a request. Middle tier (computer 2): The Web server or farm where the client’s request is directed. Both the SharePoint and Reporting Services server(s) comprise the middle tier (but we’re only concentrating on native deployments just now). Back end tier (computer 3): The Database/Analysis Services server/Cluster where the requested data is stored. In order to enable Kerberos authentication for Reporting Services it’s necessary to configure the relevant SPNs, configure trust for delegation for server accounts, configure Kerberos with full delegation and configure the authentication types for Reporting Services. Service Principle Names (SPNs) are unique identifiers for services and identify the account’s type of service. If an SPN is not configured for a service, a client account will be unable to authenticate to the servers using Kerberos. You need to be a domain administrator to add an SPN, which can be added using the SetSPN utility. For Reporting Services in native mode, the following SPNs need to be registered --SQL Server Service SETSPN -S mssqlsvc/servername:1433 Domain\SQL For named instances, or if the default instance is running under a different port, then the specific port number should be used. --Reporting Services Service SETSPN -S http/servername Domain\SSRS SETSPN -S http/servername.domain.com Domain\SSRS The SPN should be set for the NETBIOS name of the server and the FQDN. If you access the reports using a host header or DNS alias, then that should also be registered SETSPN -S http/www.reports.com Domain\SSRS --Analysis Services Service SETSPN -S msolapsvc.3/servername Domain\SSAS Next, you need to configure trust for delegation, which refers to enabling a computer to impersonate an authenticated user to services on another computer: Location Description Client 1. The requesting application must support the Kerberos authentication protocol. 2. The user account making the request must be configured on the domain controller. Confirm that the following option is not selected: Account is sensitive and cannot be delegated. Servers 1. The service accounts must be trusted for delegation on the domain controller. 2. The service accounts must have SPNs registered on the domain controller. If the service account is a domain user account, the domain administrator must register the SPNs. In Active Directory Users and Computers, verify that the domain user accounts used to access reports have been configured for delegation (the ‘Account is sensitive and cannot be delegated’ option should not be selected): We then need to configure the Reporting Services service account and computer to use Kerberos with full delegation: We also need to do the same for the SQL Server or Analysis Services service accounts and computers (depending on what type of data source you are connecting to in your reports). Finally, and this is the part that sometimes gets over-looked, we need to configure the authentication type correctly for reporting services to use Kerberos authentication. This is configured in the Authentication section of the RSReportServer.config file on the report server. <Authentication> <AuthenticationTypes> <RSWindowsNegotiate/> </AuthenticationTypes> <EnableAuthPersistence>true</EnableAuthPersistence> </Authentication> This will enable Kerberos authentication for Internet Explorer. For other browsers, see the link below. The report server instance must be restarted for these changes to take effect. Once these changes have been made, all that’s left to do is test to make sure Kerberos authentication is working properly by running a report from report manager that is configured to use Windows Integrated authentication (either connecting to Analysis Services or SQL Server back-end). Resources: Manage Kerberos Authentication Issues in a Reporting Services Environment http://download.microsoft.com/download/B/E/1/BE1AABB3-6ED8-4C3C-AF91-448AB733B1AF/SSRSKerberos.docx Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23176 How to: Configure Windows Authentication in Reporting Services http://msdn.microsoft.com/en-us/library/cc281253.aspx RSReportServer Configuration File http://msdn.microsoft.com/en-us/library/ms157273.aspx#Authentication Planning for Browser Support http://msdn.microsoft.com/en-us/library/ms156511.aspx

Read the article

Inserting and Deleting Sub Rows in GridView

- by Vincent Maverick Durano

A user in the forums (http://forums.asp.net) is asking how to insert sub rows in GridView and also add delete functionality for the inserted sub rows. In this post I'm going to demonstrate how to this in ASP.NET WebForms. The basic idea to achieve this is we just need to insert row data in the DataSource that is being used in GridView since the GridView rows will be generated based on the DataSource data. To make it more clear then let's build up a sample application. To start fire up Visual Studio and create a WebSite or Web Application project and then add a new WebForm. In the WebForm ASPX page add this GridView markup below: 1: <asp:gridview ID="GridView1" runat="server" AutoGenerateColumns="false" onrowdatabound="GridView1_RowDataBound"> 2: <Columns> 3: <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> 4: <asp:TemplateField HeaderText="Header 1"> 5: <ItemTemplate> 6: <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> 7: </ItemTemplate> 8: </asp:TemplateField> 9: <asp:TemplateField HeaderText="Header 2"> 10: <ItemTemplate> 11: <asp:TextBox ID="TextBox2" runat="server"></asp:TextBox> 12: </ItemTemplate> 13: </asp:TemplateField> 14: <asp:TemplateField HeaderText="Header 3"> 15: <ItemTemplate> 16: <asp:TextBox ID="TextBox3" runat="server"></asp:TextBox> 17: </ItemTemplate> 18: </asp:TemplateField> 19: <asp:TemplateField HeaderText="Action"> 20: <ItemTemplate> 21: <asp:LinkButton ID="LinkButton1" runat="server" onclick="LinkButton1_Click" Text="Insert"></asp:LinkButton> 22: </ItemTemplate> 23: </asp:TemplateField> 24: </Columns> 25: </asp:gridview> Then at the code behind source of ASPX page you can add this codes below: 1: private DataTable FillData() { 2: 3: DataTable dt = new DataTable(); 4: DataRow dr = null; 5: 6: //Create DataTable columns 7: dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); 8: 9: //Create Row for each columns 10: dr = dt.NewRow(); 11: dr["RowNumber"] = 1; 12: dt.Rows.Add(dr); 13: 14: dr = dt.NewRow(); 15: dr["RowNumber"] = 2; 16: dt.Rows.Add(dr); 17: 18: dr = dt.NewRow(); 19: dr["RowNumber"] = 3; 20: dt.Rows.Add(dr); 21: 22: dr = dt.NewRow(); 23: dr["RowNumber"] = 4; 24: dt.Rows.Add(dr); 25: 26: dr = dt.NewRow(); 27: dr["RowNumber"] = 5; 28: dt.Rows.Add(dr); 29: 30: //Store the DataTable in ViewState for future reference 31: ViewState["CurrentTable"] = dt; 32: 33: return dt; 34: 35: } 36: 37: private void BindGridView(DataTable dtSource) { 38: GridView1.DataSource = dtSource; 39: GridView1.DataBind(); 40: } 41: 42: private DataRow InsertRow(DataTable dtSource, string value) { 43: DataRow dr = dtSource.NewRow(); 44: dr["RowNumber"] = value; 45: return dr; 46: } 47: //private DataRow DeleteRow(DataTable dtSource, 48: 49: protected void Page_Load(object sender, EventArgs e) { 50: if (!IsPostBack) { 51: BindGridView(FillData()); 52: } 53: } 54: 55: protected void LinkButton1_Click(object sender, EventArgs e) { 56: LinkButton lb = (LinkButton)sender; 57: GridViewRow row = (GridViewRow)lb.NamingContainer; 58: DataTable dtCurrentData = (DataTable)ViewState["CurrentTable"]; 59: if (lb.Text == "Insert") { 60: //Insert new row below the selected row 61: dtCurrentData.Rows.InsertAt(InsertRow(dtCurrentData, row.Cells[0].Text + "-sub"), row.RowIndex + 1); 62: 63: } 64: else { 65: //Delete selected sub row 66: dtCurrentData.Rows.RemoveAt(row.RowIndex); 67: } 68: 69: BindGridView(dtCurrentData); 70: ViewState["CurrentTable"] = dtCurrentData; 71: } 72: 73: protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e) { 74: if (e.Row.RowType == DataControlRowType.DataRow) { 75: if (e.Row.Cells[0].Text.Contains("-sub")) { 76: ((LinkButton)e.Row.FindControl("LinkButton1")).Text = "Delete"; 77: } 78: } 79: } As you can see the code above is pretty straight forward and self explainatory but just to give you a short explaination the code above is composed of three (3) private methods which are the FillData(), BindGridView and InsertRow(). The FillData() method is a method that returns a DataTable and basically creates a dummy data in the DataTable to be used as the GridView DataSource. You can replace the code in that method if you want to use actual data from database but for the purpose of this example I just fill the DataTable with a dummy data on it. The BindGridVew is a method that handles the actual binding of GridVew. The InsertRow() is a method that returns a DataRow. This method handles the insertion of the sub row. Now in the LinkButton OnClick event, we casted the sender to a LinkButton to determine the specific object that fires up the event and get the row values. We then reference the Data from ViewState to get the current data that is being used in the GridView. If the LinkButton text is "Insert" then we will insert new row to the DataSource ( in this case the DataTable) based on the rowIndex if not then Delete the sub row that was added. Here are some screen shots of the output below: On initial load: After inserting a sub row: That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,C#,GridView

Read the article

Trabajando el redireccionamiento de usuarios/Working with user redirect methods

- by Jason Ulloa

La protección de las aplicaciones es un elemento que no se puede dejar por fuera cuando se elabora un sistema. Cada parte o elemento de código que protege nuetra aplicación debe ser cuidadosamente seleccionado y elaborado. Una de las cosas comunes con las que nos topamos en asp.net cuando deseamos trabajar con usuarios, es con la necesidad de poder redireccionarlos a los distintos elementos o páginas dependiendo del rol. Pues precisamente eso es lo que haremos, vamos a trabajar con el Web.config de nuestra aplicación y le añadiremos unas pequeñas líneas de código para lograr dar un poco mas de seguridad al sistema y sobre todo lograr el redireccionamiento. Así que veamos como logramos lo deseado: Como bien sabemos el web.config nos permite manejar muchos elementos dentro de asp.net, muchos de ellos relacionados con la seguridad, asi como tambien nos brinda la posibilidad de poder personalizar los elementos para poder adaptarlo a nuestras necesidades. Así que, basandonos en el principio de que podemos personalizar el web.config, entonces crearemos una sección personalizada, que será la que utilicemos para manejar el redireccionamiento: Nuestro primer paso será ir a nuestro web.config y buscamos las siguientes líneas: <configuration> <configSections> </sectionGroup> </sectionGroup> </sectionGroup> Y luego de ellas definiremos una nueva sección <section name="loginRedirectByRole" type="crabit.LoginRedirectByRoleSection" allowLocation="true" allowDefinition="Everywhere" /> El section name corresponde al nombre de nuestra nueva sección Type corresponde al nombre de la clase (que pronto realizaremos) y que será la encargada del Redirect Como estamos trabajando dentro de la seccion de configuración una vez definidad nuestra sección personalizada debemos cerrar esta sección </configSections> Por lo que nuestro web.config debería lucir de la siguiente forma <configuration> <configSections> </sectionGroup> </sectionGroup> </sectionGroup> <section name="loginRedirectByRole" type="crabit.LoginRedirectByRoleSection" allowLocation="true" allowDefinition="Everywhere" /> </configSections> Anteriormente definimos nuestra sección, pero esta sería totalmente inútil sin el Metodo que le da vida. En nuestro caso el metodo loginRedirectByRole, este metodo lo definiremos luego del </configSections> último que cerramos: <loginRedirectByRole> <roleRedirects> <add role="Administrador" url="~/Admin/Default.aspx" /> <add role="User" url="~/User/Default.aspx" /> </roleRedirects> </loginRedirectByRole> Como vemos, dentro de nuestro metodo LoginRedirectByRole tenemos el elemento add role. Este elemento será el que posteriormente le indicará a la aplicación hacia donde irá el usuario cuando realice un login correcto. Así que, veamos un poco esta configuración: add role="Administrador" corresponde al nombre del Role que tenemos definidio, pueden existir tantos elementos add role como tengamos definidos en nuestra aplicación. El elemento URL indica la ruta o página a la que será dirigido un usuario una vez logueado y dentro de la aplicación. Como vemos estamos utilizando el ~ para indicar que es una ruta relativa. Con esto hemos terminado la configuración de nuestro web.config, ahora veamos a fondo el código que se encargará de leer estos elementos y de utilziarlos: Para nuestro ejemplo, crearemos una nueva clase denominada LoginRedirectByRoleSection, recordemos que esta clase es la que llamamos en el elemento TYPE definido en la sección de nuestro web.config. Una vez creada la clase, definiremos algunas propiedades, pero antes de ello le indicaremos a nuestra clase que debe heredar de configurationSection, esto para poder obtener los elementos del web.config. Inherits ConfigurationSection Ahora nuestra primer propiedad <ConfigurationProperty("roleRedirects")> _ Public Property RoleRedirects() As RoleRedirectCollection Get Return DirectCast(Me("roleRedirects"), RoleRedirectCollection) End Get Set(ByVal value As RoleRedirectCollection) Me("roleRedirects") = value End Set End Property End Class Esta propiedad será la encargada de obtener todos los roles que definimos en la metodo personalizado de nuestro web.config Nuestro segundo paso será crear una segunda clase (en la misma clase LoginRedirectByRoleSection) a esta clase la llamaremos RoleRedirectCollection y la heredaremos de ConfigurationElementCollection y definiremos lo siguiente Public Class RoleRedirectCollection Inherits ConfigurationElementCollection Default Public ReadOnly Property Item(ByVal index As Integer) As RoleRedirect Get Return DirectCast(BaseGet(index), RoleRedirect) End Get End Property Default Public ReadOnly Property Item(ByVal key As Object) As RoleRedirect Get Return DirectCast(BaseGet(key), RoleRedirect) End Get End Property Protected Overrides Function CreateNewElement() As ConfigurationElement Return New RoleRedirect() End Function Protected Overrides Function GetElementKey(ByVal element As ConfigurationElement) As Object Return DirectCast(element, RoleRedirect).Role End Function End Class Nuevamente crearemos otra clase esta vez llamada RoleRedirect y en este caso la heredaremos de ConfigurationElement. Nuestra nueva clase debería lucir así: Public Class RoleRedirect Inherits ConfigurationElement <ConfigurationProperty("role", IsRequired:=True)> _ Public Property Role() As String Get Return DirectCast(Me("role"), String) End Get Set(ByVal value As String) Me("role") = value End Set End Property <ConfigurationProperty("url", IsRequired:=True)> _ Public Property Url() As String Get Return DirectCast(Me("url"), String) End Get Set(ByVal value As String) Me("url") = value End Set End Property End Class Una vez que nuestra clase madre esta lista, lo unico que nos queda es un poc de codigo en la pagina de login de nuestro sistema (por supuesto, asumo que estan utilizando los controles de login que por defecto tiene asp.net). Acá definiremos nuestros dos últimos metodos Protected Sub ctllogin_LoggedIn(ByVal sender As Object, ByVal e As System.EventArgs) Handles ctllogin.LoggedIn RedirectLogin(ctllogin.UserName) End Sub El procedimiento loggeding es parte del control login de asp.net y se desencadena en el momento en que el usuario hace loguin correctametne en nuestra aplicación Este evento desencadenará el siguiente procedimiento para redireccionar. Private Sub RedirectLogin(ByVal username As String) Dim roleRedirectSection As crabit.LoginRedirectByRoleSection = DirectCast(ConfigurationManager.GetSection("loginRedirectByRole"), crabit.LoginRedirectByRoleSection) For Each roleRedirect As crabit.RoleRedirect In roleRedirectSection.RoleRedirects If Roles.IsUserInRole(username, roleRedirect.Role) Then Response.Redirect(roleRedirect.Url) End If Next End Sub Con esto, nuestra aplicación debería ser capaz de redireccionar sin problemas y manejar los roles. Además, tambien recordar que nuestro ejemplo se basa en la utilización del esquema de bases de datos que por defecto nos proporcionada asp.net.

Read the article

bluetooth not working on Ubuntu 13.10

- by iacopo

I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

Read the article

13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

- by user1898041

Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

Read the article

Using Lazy<T> and abstract wrapper class to lazy-load complex system parameters

- by DigiMortal

.NET Framework 4.0 introduced new class called Lazy<T> and I wrote blog post about it: .Net Framework 4.0: Using System.Lazy<T>. One thing is annoying for me – we have to keep lazy loaded value and its value loader as separate things. In this posting I will introduce you my Lazy<T> wrapper for complex to get system parameters that uses template method to keep lazy value loader in parameter class. Problem with original implementation Here’s the sample code that shows you how Lazy<T> is usually used. This is just sample code, don’t focus on the fact that this is dummy console application. class Program { static void Main(string[] args) { var temperature = new Lazy<int>(LoadMinimalTemperature); Console.WriteLine("Minimal room temperature: " + temperature.Value); Console.ReadLine(); } protected static int LoadMinimalTemperature() { var returnValue = 0; // Do complex stuff here return true; } } The problem is that our class with many lazy loaded properties will grow messy if it has all value loading code inside it. This code may be complex for more than one parameter and in this case it is better to use separate class for this parameter. Defining base class for parameters As a first step I will define base class for all lazy-loaded parameters. This class is wrapper around Lazy<T> and it also offers one template method that parameter classes have to override to provide loaded data. public abstract class LazyParameter<T> { private Lazy<T> _lazyParam; public LazyParameter() { _lazyParam = new Lazy<T>(Load); } protected abstract T Load(); public T Value { get { return _lazyParam.Value; } } } It is also possible to extend Lazy<T> but I don’t prefer to do it as Lazy<T> has six constructors we have to take care of. Also I don’t like to expose Lazy<T> public interface to users of my parameter classes. Creating parameter class Now it’s time to create our first parameter class. Notice how few stuff we have in this class besides overridden Load() method. public class MinimalRoomTemperature : LazyParameter<int> { protected override int Load() { var returnValue = 0; // Do complex stuff here return returnValue; } } Using parameter class is simple. Here’s my test code. class Program { static void Main(string[] args) { var parameter = new MinimalRoomTemperature(); Console.WriteLine("Minimal room temperature: " + parameter.Value); Console.ReadLine(); } } Conclusion Lazy<T> is useful class that you usually don’t want to use outside from API-s. I like this class but I don’t like when people are using this class directly in application code. In this posting I showed you how to use Lazy<T> with wrapper class to get complex parameter loading code out from classes that use this parameter. We ended up with generic base class for parameters that you can also use as base for other similar classes (you have to find better name to base class in this case).

Read the article

Gnome Do not Launching

- by PyRulez

When I try running gnome do, I get this. chris@Chris-Ubuntu-Laptop:~$ gnome-do pgrep: invalid user name: -u and it is not writable Trying sudo: chris@Chris-Ubuntu-Laptop:~$ sudo gnome-do [NetworkService] Could not initialize Network Manager dbus: Unable to open the session message bus. [Error 17:54:30.122] [SystemService] Could not initialize dbus: Unable to open the session message bus. (Do:2401): Wnck-CRITICAL **: wnck_set_client_type got called multiple times. (Do:2401): libdo-WARNING **: Binding '<Super>space' failed! [Error 17:54:30.649] [AbstractKeyBindingService] Key "" is already mapped. Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . ^[^\Full thread dump: "<unnamed thread>" tid=0x0xb7570700 this=0x0x56f18 thread handle 0x403 state : not waiting owns () at (wrapper managed-to-native) Mono.Unix.Native.Syscall.read (int,intptr,ulong) <0xffffffff> at Mono.Unix.Native.Syscall.read (int,void*,ulong) <0x00023> at Mono.Unix.UnixStream.Read (byte[],int,int) <0x0008b> at NDesk.DBus.Connection.ReadMessage () <0x0003c> at NDesk.DBus.Connection.Iterate () <0x0001b> at NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0x00033> at (wrapper native-to-managed) NDesk.DBus.BusG/<Init>c__AnonStorey0.<>m__0 (intptr,NDesk.GLib.IOCondition,intptr) <0xffffffff> at (wrapper managed-to-native) Gtk.Clipboard.gtk_clipboard_wait_is_text_available (intptr) <0xffffffff> at Gtk.Clipboard.WaitIsTextAvailable () <0x00017> at Do.Universe.SelectedTextItem.UpdateSelection (object,System.EventArgs) <0x00027> at Do.Platform.AbstractApplicationService.OnSummoned () <0x00025> at Do.Platform.ApplicationService.<ApplicationService>m__31 (object,System.EventArgs) <0x00013> at Do.Core.Controller.OnSummoned () <0x00025> at Do.Core.Controller.Summon () <0x00027> at Do.Do.Main (string[]) <0x001eb> at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <0xffffffff> "<unnamed thread>" tid=0x0xb2c81b40 this=0x0x194150 thread handle 0x412 state : interrupted state owns () at (wrapper managed-to-native) System.IO.InotifyWatcher.ReadFromFD (intptr,byte[],intptr) <0xffffffff> at System.IO.InotifyWatcher.Monitor () <0x0005f> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> "Universe Update Dispatcher" tid=0x0xb29ffb40 this=0x0x569d8 thread handle 0x41b state : interrupted state owns () at (wrapper managed-to-native) System.Threading.WaitHandle.WaitOne_internal (System.Threading.WaitHandle,intptr,int,bool) <0xffffffff> at System.Threading.WaitHandle.WaitOne (System.TimeSpan,bool) <0x00133> at System.Threading.WaitHandle.WaitOne (System.TimeSpan) <0x00022> at Do.Core.UniverseManager.UniverseUpdateLoop () <0x0007a> at System.Threading.Thread.StartInternal () <0x00057> at (wrapper runtime-invoke) object.runtime_invoke_void__this__ (object,intptr,intptr,intptr) <0xffffffff> Tomboy.NotesItemSource "Tomboy Notes" encountered an error in UpdateItems: System.TypeInitializationException: An exception was thrown by the type initializer for Tomboy.TomboyDBus ---> System.Exception: Unable to open the session message bus. ---> System.ArgumentNullException: Argument cannot be null. Parameter name: address at NDesk.DBus.Bus.Open (System.String address) [0x00000] in <filename unknown>:0 at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at NDesk.DBus.Bus.get_Session () [0x00000] in <filename unknown>:0 at Tomboy.TomboyDBus..cctor () [0x00000] in <filename unknown>:0 --- End of inner exception stack trace --- at Tomboy.NotesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Firefox.PlacesItemSource "Firefox Places" encountered an error in UpdateItems: System.InvalidCastException: Cannot cast from source type to destination type. at Mono.Data.Sqlite.SqliteDataReader.VerifyType (Int32 i, DbType typ) [0x00000] in <filename unknown>:0 at Mono.Data.Sqlite.SqliteDataReader.GetString (Int32 i) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource+<LoadPlaceItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem].AddEnumerable (IEnumerable`1 enumerable) [0x00000] in <filename unknown>:0 at System.Collections.Generic.List`1[Firefox.PlaceItem]..ctor (IEnumerable`1 collection) [0x00000] in <filename unknown>:0 at System.Linq.Enumerable.ToArray[PlaceItem] (IEnumerable`1 source) [0x00000] in <filename unknown>:0 at Firefox.PlacesItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . Do.Universe.Linux.GNOMESpecialLocationsItemSource "GNOME Special Locations" encountered an error in UpdateItems: System.IO.FileNotFoundException: Could not find file "/root/.gtk-bookmarks". File name: '/root/.gtk-bookmarks' at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean anonymous, FileOptions options) [0x00000] in <filename unknown>:0 at System.IO.FileStream..ctor (System.String path, FileMode mode, FileAccess access, FileShare share) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.FileStream:.ctor (string,System.IO.FileMode,System.IO.FileAccess,System.IO.FileShare) at System.IO.File.OpenRead (System.String path) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path, System.Text.Encoding encoding, Boolean detectEncodingFromByteOrderMarks, Int32 bufferSize) [0x00000] in <filename unknown>:0 at System.IO.StreamReader..ctor (System.String path) [0x00000] in <filename unknown>:0 at (wrapper remoting-invoke-with-check) System.IO.StreamReader:.ctor (string) at Do.Universe.Linux.GNOMESpecialLocationsItemSource+<ReadBookmarkItems>c__Iterator3.MoveNext () [0x00000] in <filename unknown>:0 at Do.Universe.Linux.GNOMESpecialLocationsItemSource.UpdateItems () [0x00000] in <filename unknown>:0 at Do.Universe.Safe.SafeItemSource.UpdateItems () [0x00000] in <filename unknown>:0 . It stops when I try my key combination, ctrl-alt-. It does not pop up though.

Read the article

Ardour wont start Jack problem

- by Drew S

I downloaded Ardour yesterday, it worked, edited an audio file done. Come back today it wont start I get this: Ardour could not start JACK There are several possible reasons: 1) You requested audio parameters that are not supported.. 2) JACK is running as another user. Please consider the possibilities, and perhaps try different parameters. So I try and look at qjackctl to see what happening there. When I try to start JACK I get D-BUS: JACK server could not be started. then Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. and this is the message box in JACK. 15:22:12.927 Patchbay deactivated. 15:22:12.927 Statistics reset. 15:22:12.944 ALSA connection change. 15:22:12.951 D-BUS: Service is available (org.jackaudio.service aka jackdbus). Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:22:12.959 ALSA connection graph change. 15:22:45.850 ALSA connection graph change. 15:22:46.021 ALSA connection change. 15:22:56.492 ALSA connection graph change. 15:22:56.624 ALSA connection change. 15:23:42.340 D-BUS: JACK server could not be started. Sorry Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:23:42 2013: Starting jack server... Wed Oct 23 15:23:42 2013: JACK server starting in realtime mode with priority 10 Wed Oct 23 15:23:42 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Wed Oct 23 15:23:42 2013: Acquired audio card Audio0 Wed Oct 23 15:23:42 2013: creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|-|32bit Wed Oct 23 15:23:42 2013: ERROR: ATTENTION: The playback device "hw:0" is already in use. The following applications are using your soundcard(s) so you should check them and stop them as necessary before trying to start JACK again: pulseaudio (process ID 2553) Wed Oct 23 15:23:42 2013: ERROR: Cannot initialize driver Wed Oct 23 15:23:42 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:23:42 2013: ERROR: Failed to open server Wed Oct 23 15:23:43 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:41.669 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:26:49.006 D-BUS: JACK server could not be started. Sorry Wed Oct 23 15:26:48 2013: Starting jack server... Wed Oct 23 15:26:48 2013: JACK server starting in non-realtime mode Wed Oct 23 15:26:48 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:26:48 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:48 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:48 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:26:48 2013: ERROR: Cannot initialize driver Wed Oct 23 15:26:48 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:26:48 2013: ERROR: Failed to open server Wed Oct 23 15:26:50 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:52.441 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:26:55.997 D-BUS: JACK server could not be started. Sorry Wed Oct 23 15:26:55 2013: Starting jack server... Wed Oct 23 15:26:55 2013: JACK server starting in non-realtime mode Wed Oct 23 15:26:55 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:26:55 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:55 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:26:55 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:26:55 2013: ERROR: Cannot initialize driver Wed Oct 23 15:26:55 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:26:55 2013: ERROR: Failed to open server Wed Oct 23 15:26:57 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:26:59.054 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started 15:29:24.624 ALSA connection graph change. 15:29:24.641 ALSA connection change. 15:33:11.760 D-BUS: JACK server could not be started. Sorry Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started Wed Oct 23 15:33:11 2013: Starting jack server... Wed Oct 23 15:33:11 2013: JACK server starting in non-realtime mode Wed Oct 23 15:33:11 2013: ERROR: Cannot lock down 82274202 byte memory area (Cannot allocate memory) Wed Oct 23 15:33:11 2013: ERROR: cannot register object path "/org/freedesktop/ReserveDevice1/Audio0": A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:33:11 2013: ERROR: Failed to acquire device name : Audio0 error : A handler is already registered for /org/freedesktop/ReserveDevice1/Audio0 Wed Oct 23 15:33:11 2013: ERROR: Audio device hw:0 cannot be acquired... Wed Oct 23 15:33:11 2013: ERROR: Cannot initialize driver Wed Oct 23 15:33:11 2013: ERROR: JackServer::Open failed with -1 Wed Oct 23 15:33:11 2013: ERROR: Failed to open server Wed Oct 23 15:33:12 2013: Saving settings to "/home/drew/.config/jack/conf.xml" ... 15:34:09.439 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Cannot connect to server socket err = No such file or directory Cannot connect to server request channel jack server is not running or cannot be started

Read the article

ASP.NET Web Forms Extensibility: Control Adapters

- by Ricardo Peres

All ASP.NET controls from version 2.0 can be associated with a control adapter. A control adapter is a class that inherits from ControlAdapter and it has the chance to interact with the control(s) it is targeting so as to change some of its properties or alter its output. I talked about control adapters before and they really a cool feature. The ControlAdapter class exposes virtual methods for some well known lifecycle events, OnInit, OnLoad, OnPreRender and OnUnload that closely match their Control counterparts, but are fired before them. Because the control adapter has a reference to its target Control, it can cast it to its concrete class and do something with it before its lifecycle events are actually fired. The adapter is also notified before the control is rendered (BeginRender), after their children are renderes (RenderChildren) and after itself is rendered (Render): this way the adapter can modify the control’s output. Control adapters may be specified for any class inheriting from Control, including abstract classes, web server controls and even pages. You can, for example, specify a control adapter for the WebControl and UserControl classes, but, curiously, not for Control itself. When specifying a control adapter for a page, it must inherit from PageAdapter instead of ControlAdapter. The adapter for a control, if specified, can be found on the protected Adapter property, and for a page, on the PageAdapter property. The first use of control adapters that came to my attention was for changing the output of standard ASP.NET web controls so that they were more based on CSS and less on HTML tables: it was the CSS Friendly Control Adapters project, now available at http://code.google.com/p/aspnetcontroladapters/. They are interesting because you specify them in one location and they apply anywhere a control of the target type is created. Mind you, it applies to controls declared on markup as well as controls created by code with the new operator. So, how do you use control adapters? The most usual way is through a browser definition file. In it, you specify a set of control adapters and their target controls, for a given browser. This browser definition file is a XML file with extension .Browser, and can either be global (%WINDIR%\Microsoft.NET\Framework64\vXXXX\Config\Browsers) or local to the web application, in which case, it must be placed inside the App_Browsers folder at the root of the web site. It looks like this: 1: <browsers> 2: <browser refID="Default"> 3: <controlAdapters> 4: <adapter controlType="System.Web.UI.WebControls.TextBox" adapterType="MyNamespace.TextBoxAdapter, MyAssembly" /> 5: </controlAdapters> 6: </browser> 7: </browsers> A browser definition file targets a specific browser, so you can have different definitions for Chrome, IE, Firefox, Opera, as well as for specific version of each of those (like IE8, Firefox3). Alternatively, if you set the target to Default, it will apply to all. The reason to pick a specific browser and version might be, for example, in order to circumvent some limitation present in that specific version, so that on markup you don’t need to be concerned with that. Another option is through the the current Browser object of the request: 1: this.Context.Request.Browser.Adapters.Add(typeof(TextBox).FullName, typeof(TextBoxAdapter).FullName); This must go very early on the page lifecycle, for example, on the OnPreInit event, or even on Application_Start. You have to specify the full class name for both the target control and the adapter. Of course, you have to do this for every request, because it won’t be persisted. As an example, you may know that the classic TextBox control renders an HTML input tag if its TextMode is set to SingleLine and a textarea if set to MultiLine. Because the textarea has no notion of maximum length, unlike the input, something must be done in order to enforce this. Here’s a simple suggestion: 1: public class TextBoxControlAdapter : ControlAdapter 2: { 3: protected TextBox Target 4: { 5: get 6: { 7: return (this.Control as TextBox); 8: } 9: } 10: 11: protected override void OnLoad(EventArgs e) 12: { 13: if ((this.Target.MaxLength > 0) && (this.Target.TextMode == TextBoxMode.MultiLine)) 14: { 15: if (this.Target.Page.ClientScript.IsClientScriptBlockRegistered("TextBox_KeyUp") == false) 16: { 17: if (this.Target.Page.ClientScript.IsClientScriptBlockRegistered(this.Target.Page.GetType(), "TextBox_KeyUp") == false) 18: { 19: String script = String.Concat("function TextBox_KeyUp(sender) { if (sender.value.length > ", this.Target.MaxLength, ") { sender.value = sender.value.substr(0, ", this.Target.MaxLength, "); } }\n"); 20: 21: this.Target.Page.ClientScript.RegisterClientScriptBlock(this.Target.Page.GetType(), "TextBox_KeyUp", script, true); 22: } 23: 24: this.Target.Attributes["onkeyup"] = "TextBox_KeyUp(this)"; 25: } 26: } 27: 28: base.OnLoad(e); 29: } 30: } What it does is, for every TextBox control, if it is set for multi line and has a defined maximum length, it injects some JavaScript that will filter out any content that exceeds this maximum length. This will occur for any TextBox that you may have on your site, or any class that inherits from it. You can use any of the previous options to register this adapter. Stay tuned for more ASP.NET Web Forms extensibility tips!

Read the article

Is this proper OO design for C++?

- by user121917

I recently took a software processes course and this is my first time attempting OO design on my own. I am trying to follow OO design principles and C++ conventions. I attempted and gave up on MVC for this application, but I am trying to "decouple" my classes such that they can be easily unit-tested and so that I can easily change the GUI library used and/or the target OS. At this time, I have finished designing classes but have not yet started implementing methods. The function of the software is to log all packets sent and received, and display them on the screen (like WireShark, but for one local process only). The software accomplishes this by hooking the send() and recv() functions in winsock32.dll, or some other pair of analogous functions depending on what the intended Target is. The hooks add packets to SendPacketList/RecvPacketList. The GuiLogic class starts a thread which checks for new packets. When new packets are found, it utilizes the PacketFilter class to determine the formatting for the new packet, and then sends it to MainWindow, a native win32 window (with intent to later port to Qt).1 Full size image of UML class diagram Here are my classes in skeleton/header form (this is my actual code): class PacketModel { protected: std::vector<byte> data; int id; public: PacketModel(); PacketModel(byte* data, unsigned int size); PacketModel(int id, byte* data, unsigned int size); int GetLen(); bool IsValid(); //len >= sizeof(opcode_t) opcode_t GetOpcode(); byte* GetData(); //returns &(data[0]) bool GetData(byte* outdata, int maxlen); void SetData(byte* pdata, int len); int GetId(); void SetId(int id); bool ParseData(char* instr); bool StringRepr(char* outstr); byte& operator[] (const int index); }; class SendPacket : public PacketModel { protected: byte* returnAddy; public: byte* GetReturnAddy(); void SetReturnAddy(byte* addy); }; class RecvPacket : public PacketModel { protected: byte* callAddy; public: byte* GetCallAddy(); void SetCallAddy(byte* addy); }; //problem: packets may be added to list at any time by any number of threads //solution: critical section associated with each packet list class Synch { public: void Enter(); void Leave(); }; template<class PacketType> class PacketList { private: static const int MAX_STORED_PACKETS = 1000; public: static const int DEFAULT_SHOWN_PACKETS = 100; private: vector<PacketType> list; Synch synch; //wrapper for critical section public: void AddPacket(PacketType* packet); PacketType* GetPacket(int id); int TotalPackets(); }; class SendPacketList : PacketList<SendPacket> { }; class RecvPacketList : PacketList<RecvPacket> { }; class Target //one socket { bool Send(SendPacket* packet); bool Inject(RecvPacket* packet); bool InitSendHook(SendPacketList* sendList); bool InitRecvHook(RecvPacketList* recvList); }; class FilterModel { private: opcode_t opcode; int colorID; bool bFilter; char name[41]; }; class FilterFile { private: FilterModel filter; public: void Save(); void Load(); FilterModel* GetFilter(opcode_t opcode); }; class PacketFilter { private: FilterFile filters; public: bool IsFiltered(opcode_t opcode); bool GetName(opcode_t opcode, char* namestr); //return false if name does not exist COLORREF GetColor(opcode_t opcode); //return default color if no custom color }; class GuiLogic { private: SendPacketList sendList; RecvPacketList recvList; PacketFilter packetFilter; void GetPacketRepr(PacketModel* packet); void ReadNew(); void AddToWindow(); public: void Refresh(); //called from thread void GetPacketInfo(int id); //called from MainWindow }; I'm looking for a general review of my OO design, use of UML, and use of C++ features. I especially just want to know if I'm doing anything considerably wrong. From what I've read, design review is on-topic for this site (and off-topic for the Code Review site). Any sort of feedback is greatly appreciated. Thanks for reading this.

Read the article

Dell Studio 1737 Overheating

- by Sean

I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

Read the article

How to label a cuboid?

- by usha

Hi this is how my 3dcuboid looks, I have attached the complete code. I want to label this cuboid using different names across sides, how is this possible using opengl on android? public class MyGLRenderer implements Renderer { Context context; Cuboid rect; private float mCubeRotation; // private static float angleCube = 0; // Rotational angle in degree for cube (NEW) // private static float speedCube = -1.5f; // Rotational speed for cube (NEW) public MyGLRenderer(Context context) { rect = new Cuboid(); this.context = context; } public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glLoadIdentity(); // Reset the model-view matrix gl.glTranslatef(0.2f, 0.0f, -8.0f); // Translate right and into the screen gl.glScalef(0.8f, 0.8f, 0.8f); // Scale down (NEW) gl.glRotatef(mCubeRotation, 1.0f, 1.0f, 1.0f); // gl.glRotatef(angleCube, 1.0f, 1.0f, 1.0f); // rotate about the axis (1,1,1) (NEW) rect.draw(gl); mCubeRotation -= 0.15f; //angleCube += speedCube; } public void onSurfaceChanged(GL10 gl, int width, int height) { // TODO Auto-generated method stub if (height == 0) height = 1; // To prevent divide by zero float aspect = (float)width / height; // Set the viewport (display area) to cover the entire window gl.glViewport(0, 0, width, height); // Setup perspective projection, with aspect ratio matches viewport gl.glMatrixMode(GL10.GL_PROJECTION); // Select projection matrix gl.glLoadIdentity(); // Reset projection matrix // Use perspective projection GLU.gluPerspective(gl, 45, aspect, 0.1f, 100.f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select model-view matrix gl.glLoadIdentity(); // Reset } public void onSurfaceCreated(GL10 gl, EGLConfig config) { // TODO Auto-generated method stub gl.glClearColor(0.0f, 0.0f, 0.0f, 1.0f); // Set color's clear-value to black gl.glClearDepthf(1.0f); // Set depth's clear-value to farthest gl.glEnable(GL10.GL_DEPTH_TEST); // Enables depth-buffer for hidden surface removal gl.glDepthFunc(GL10.GL_LEQUAL); // The type of depth testing to do gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); // nice perspective view gl.glShadeModel(GL10.GL_SMOOTH); // Enable smooth shading of color gl.glDisable(GL10.GL_DITHER); // Disable dithering for better performance }} public class Cuboid{ private FloatBuffer mVertexBuffer; private FloatBuffer mColorBuffer; private ByteBuffer mIndexBuffer; private float vertices[] = { //width,height,depth -2.5f, -1.0f, -1.0f, 1.0f, -1.0f, -1.0f, 1.0f, 1.0f, -1.0f, -2.5f, 1.0f, -1.0f, -2.5f, -1.0f, 1.0f, 1.0f, -1.0f, 1.0f, 1.0f, 1.0f, 1.0f, -2.5f, 1.0f, 1.0f }; private float colors[] = { // R,G,B,A COLOR 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 1.0f, 1.0f }; private byte indices[] = { // VERTEX 0,1,2,3,4,5,6,7 REPRESENTATION FOR FACES 0, 4, 5, 0, 5, 1, 1, 5, 6, 1, 6, 2, 2, 6, 7, 2, 7, 3, 3, 7, 4, 3, 4, 0, 4, 7, 6, 4, 6, 5, 3, 0, 1, 3, 1, 2 }; public Cuboid() { ByteBuffer byteBuf = ByteBuffer.allocateDirect(vertices.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mVertexBuffer = byteBuf.asFloatBuffer(); mVertexBuffer.put(vertices); mVertexBuffer.position(0); byteBuf = ByteBuffer.allocateDirect(colors.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mColorBuffer = byteBuf.asFloatBuffer(); mColorBuffer.put(colors); mColorBuffer.position(0); mIndexBuffer = ByteBuffer.allocateDirect(indices.length); mIndexBuffer.put(indices); mIndexBuffer.position(0); } public void draw(GL10 gl) { gl.glFrontFace(GL10.GL_CW); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, mVertexBuffer); gl.glColorPointer(4, GL10.GL_FLOAT, 0, mColorBuffer); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glDrawElements(GL10.GL_TRIANGLES, 36, GL10.GL_UNSIGNED_BYTE, mIndexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } } public class Draw3drect extends Activity { private GLSurfaceView glView; // Use GLSurfaceView // Call back when the activity is started, to initialize the view @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); glView = new GLSurfaceView(this); // Allocate a GLSurfaceView glView.setRenderer(new MyGLRenderer(this)); // Use a custom renderer this.setContentView(glView); // This activity sets to GLSurfaceView } // Call back when the activity is going into the background @Override protected void onPause() { super.onPause(); glView.onPause(); } // Call back after onPause() @Override protected void onResume() { super.onResume(); glView.onResume(); } }

Read the article

Sliding a div across to left and the next div appears

- by littleMan

I have this form Im creating and when you click on the "Next" button I want to slide the next form() across to the left this is my function jQuery('input[name^=Next]').click(function () { current.animate({ marginLeft: -current.width() }, 750); current = current.next(); }); That function isn't working the way I want to. it slides the text in the container across not the whole container it could be a css problem for all I know. And my form which has a class name .wikiform doesn't center horizontally. here is my full code. I'm not that experience in javascript so you would be appreciated. cut and paste and try it out <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd" /> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <script type="text/javascript" language="javascript" src="Scripts/jquery-1.4.4.js"></script> <script type="text/javascript" language="javascript" src="Scripts/jquery-easing.1.2.pack.js"></script> <script type="text/javascript" language="javascript"> (function ($) { $.fn.WikiForm = function (options) { this.Mode = options.mode || 'CancelOk' || 'Ok' || 'Wizard'; var current = jQuery('.wikiform .view :first'); function positionForm() { //jQuery('.wikiform').css( {'top': jQuery('body') .css('overflow-y', 'hidden'); jQuery('<div id="overlay"></div>') .insertBefore('.wikiform') .css('top', jQuery(document).scrollTop()) .animate({ 'opacity': '0.8' }, 'slow'); jQuery('.wikiform') .css('height', jQuery('.wikiform .wizard .view:first').height() + jQuery('.wikiform .navigation').height()) .css('top', window.screen.availHeight / 2 - jQuery('.wikiform').height() / 2) .css('width', jQuery('.wikiform .wizard .view:first').width()) .css('left', -jQuery('.wikiform').width()) .animate({ marginLeft: jQuery(document).width() / 2 + jQuery('.wikiform').width() / 2 }, 750); jQuery('.wikiform .wizard') .css('overflow', 'hidden') .css('height', jQuery('.wikiform .wizard .view:first').height() ); } if (this.Mode == "Wizard") { return this.each(function () { var current = jQuery('.wizard .view :first'); var form = jQuery(this); positionForm(); jQuery('input[name^=Next]').click(function () { current.animate({ marginLeft: -current.width() }, 750); current = current.next(); }); jQuery('input[name^=Back]').click(function () { alert("Back"); }); }); } else if (this.Mode == "CancelOk") { return this.each(function () { }); } else { return this.each(function () { }); } }; })(jQuery); $(document).ready(function () { jQuery(window).bind("load", function () { jQuery(".wikiform").WikiForm({ mode: 'Wizard', speed:750, ease:"expoinout" }); }); }); </script> <style type="text/css"> body { margin:0px; } #overlay { background-color:Black; position:absolute; top:0; left:0; height:100%; width:100%; } .wikiform { background-color:Green; position:absolute; } .wikiform .wizard { clear: both; } .wizard { position: relative; left: 0; top: 0; width: 100%; list-style-type: none; } .wizard .view { float:left; } .view .form { } .navigation { float:right; clear:left } #view1 { background-color:Aqua; width:300px; height:300px; } #view2 { background-color:Fuchsia; width:300px; height:300px; } </style> <title></title> </head> <body><form action="" method=""><div id="layout"> <div id="header"> Header </div> <div id="content" style="height:2000px"> Content </div> <div id="footer"> Footer </div> </div> <div id="formView1" class="wikiform"> <div class="wizard"> <div id="view1" class="view"> <div class="form"> Content 1 </div> </div> <div id="view2" class="view"> <div class="form"> Content 2 </div> </div> </div> <div class="navigation"> <input type="button" name="Back" value=" Back " /> <input type="button" name="Next " class="Next" value=" Next " /> <input type="button" name="Cancel" value="Cancel" /> </div> </div></form></body></html>

Read the article

What's a reliable and practical way to protect software with a user license ?

- by Frank

I know software companies use licenses to protect their softwares, but I also know there are keygen programs to bypass them. I'm a Java developer, if I put my program online for sale, what's a reliable and practical way to protect it ? How about something like this, would it work ? <1> I use ProGuard to protect the source code. <2> Sign the executable Jar file. <3> Since my Java program only need to work on PC [I need to use JDIC in it], I wrap the final executable Jar into an .exe file which makes it harder to decompile. <4> When a user first downloads and runs my app, it checks for a Pass file on his PC. <5> If the Pass file doesn't exist, run the app in demo mode, exits in 5 minutes. <6> When demo exits a panel opens with a "Buy Now" button. This demo mode repeats forever unless step <7> happens. <7> If user clicks the "Buy Now" button, he fills out a detailed form [name, phone, email ...], presses a "Verify Info" button to save the form to a Pass file, leaving license Key # field empty in this newly generated Pass file. <8> Pressing "Verify Info" button will take him to a html form pre-filled with his info to verify what he is buying, also hidden in the form's input filed is a license Key number. He can now press a "Pay Now" button to goto Paypal to finish the process. <9> The hidden license Key # will be passed to Paypal as product Id info and emailed to me. <10> After I got the payment and Paypal email, I'll add the license Key # to a valid license Key list, and put it on my site, only I know the url. The list is updated hourly. <11> Few hours later when the user runs the app again, it can find the Pass file on his PC, but the license Key # value is empty, so it goes to the valid list url to see if its license Key # is on the list, if so, write the license Key # into the Pass file, and the next time it starts again, it will find the valid license Key # and start in purchased mode without exiting in 5 minutes. <12> If it can't find its license Key # on the list from my url, run in demo mode. <13> In order to prevent a user from copying and using another paid user's valid Pass file, the license Key # is unique to each PC [I'm trying to find how], so a valid Pass file only works on one PC. Only after a user has paid will Paypal email me the valid license Key # with his payment. <14> The Id checking goes like this : Use the CPU ID : "CPU_01-02-ABC" for example, encrypt it to the result ID : "XeR5TY67rgf", and compare it to the list on my url, if "XeR5TY67rgf" is not on my valid user list, run in demo mode. If it exists write "XeR5TY67rgf" into the Pass File license field. In order to get a unique license Key, can I use his PC's CPU Id ? Or something unique and useful [ relatively less likely to change ]. If so let's say this CPU ID is "CPU_01-02-ABC", I can encrypt it to something like "XeR5TY67rgf", and pass it to Paypal as product Id in the hidden html form field, then I'll get it from Paypal's email notification, and add it to the valid license Key # list on the url. So, even if a hacker knows it uses CPU Id, he can't write it into the Pass file field, because only encrypted Ids are valid Ids. And only my program knows how to generate the encrypted Ids. And even if another hacker knows the encrypted Id is hidden in the html form input field, as long as it's not on my url list, it's still invalid. Can anyone find any flaw in the above system ? Is it practical ? And most importantly how do I get hold of this unique ID that can represent a user's PC ? Frank

Read the article

How to set Grub to automatically load Xen kernel

- by Cerin

How do you configure Grub to automatically use the Xen kernel under Ubuntu 11.10? No matter what I do, it loads the first menuentry. The only way I can get it to load Xen is to manually select the kernel, which I can't do if I have to reboot the server remotely, or there's a power failure and the machine automatically boots up when power's restored, etc. It's driving me nuts. In my /boot/grub/grub.cfg, the Xen kernel is at index 4 (i.e. it's the 5th menuentry). So I've tried: Setting GRUB_DEFAULT=4, and running sudo update-grub Setting GRUB_DEFAULT=saved and GRUB_SAVEDEFAULT=true, and running sudo update-grub Setting GRUB_DEFAULT="Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server", and running sudo update-grub None of these work. It continues to load the first menuentry, which is "Ubuntu, with Linux 3.0.0-16-server". Below is my current /boot/grub/grub.cfg. What am I doing wrong? # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=2 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.0.0-16-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux /boot/vmlinuz-3.0.0-16-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro initrd /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu, with Linux 3.0.0-16-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Linux 3.0.0-16-server ...' linux /boot/vmlinuz-3.0.0-16-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-16-server } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-12-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux /boot/vmlinuz-3.0.0-12-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro initrd /boot/initrd.img-3.0.0-12-server } menuentry 'Ubuntu, with Linux 3.0.0-12-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Linux 3.0.0-12-server ...' linux /boot/vmlinuz-3.0.0-12-server root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-12-server } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### submenu "Xen 4.1-amd64" { menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-16-server ...' module /boot/vmlinuz-3.0.0-16-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-16-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-16-server ...' module /boot/vmlinuz-3.0.0-16-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro single echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-16-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-12-server' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-12-server ...' module /boot/vmlinuz-3.0.0-12-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-12-server } menuentry 'Ubuntu GNU/Linux, with Xen 4.1-amd64 and Linux 3.0.0-12-server (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os --class xen { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac echo 'Loading Xen 4.1-amd64 ...' multiboot /boot/xen-4.1-amd64.gz placeholder echo 'Loading Linux 3.0.0-12-server ...' module /boot/vmlinuz-3.0.0-12-server placeholder root=UUID=d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac ro single echo 'Loading initial ramdisk ...' module /boot/initrd.img-3.0.0-12-server } } ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod raid insmod mdraid1x insmod part_msdos insmod part_msdos insmod ext2 set root='(mduuid/be73165bc31d6f5cd00d05036c7b964f)' search --no-floppy --fs-uuid --set=root d72bad3f-9ed7-44b9-b3d1-d7af9f62a8ac linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

Read the article

Trying to implement fling events on an object

- by Adam Short

I have a game object, well a bitmap, which I'd like to "fling". I'm struggling to get it to fling ontouchlistener due to it being a bitmap and not sure how to proceed and I'm struggling to find the resources to help. Here's my code so far: https://github.com/addrum/Shapes GameActivity class: package com.main.shapes; import android.app.Activity; import android.content.Context; import android.graphics.Bitmap; import android.graphics.BitmapFactory; import android.graphics.Canvas; import android.os.Bundle; import android.view.GestureDetector; import android.view.MotionEvent; import android.view.SurfaceHolder; import android.view.SurfaceView; import android.view.View.OnTouchListener; import android.view.Window; public class GameActivity extends Activity { private GestureDetector gestureDetector; View view; Bitmap ball; float x, y; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); //Remove title bar this.requestWindowFeature(Window.FEATURE_NO_TITLE); view = new View(this); ball = BitmapFactory.decodeResource(getResources(), R.drawable.ball); gestureDetector = new GestureDetector(this, new GestureListener()); x = 0; y = 0; setContentView(view); ball.setOnTouchListener(new OnTouchListener() { @Override public boolean onTouch(android.view.View v, MotionEvent event) { // TODO Auto-generated method stub return false; } }); } @Override protected void onPause() { super.onPause(); view.pause(); } @Override protected void onResume() { super.onResume(); view.resume(); } public class View extends SurfaceView implements Runnable { Thread thread = null; SurfaceHolder holder; boolean canRun = false; public View(Context context) { super(context); holder = getHolder(); } public void run() { while (canRun) { if (!holder.getSurface().isValid()) { continue; } Canvas c = holder.lockCanvas(); c.drawARGB(255, 255, 255, 255); c.drawBitmap(ball, x - (ball.getWidth() / 2), y - (ball.getHeight() / 2), null); holder.unlockCanvasAndPost(c); } } public void pause() { canRun = false; while (true) { try { thread.join(); } catch (InterruptedException e) { e.printStackTrace(); } break; } thread = null; } public void resume() { canRun = true; thread = new Thread(this); thread.start(); } } } GestureListener class: package com.main.shapes; import android.view.GestureDetector.SimpleOnGestureListener; import android.view.MotionEvent; public class GestureListener extends SimpleOnGestureListener { private static final int SWIPE_MIN_DISTANCE = 120; private static final int SWIPE_THRESHOLD_VELOCITY = 200; @Override public boolean onFling(MotionEvent e1, MotionEvent e2, float velocityX, float velocityY) { if (e1.getX() - e2.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { //From Right to Left return true; } else if (e2.getX() - e1.getX() > SWIPE_MIN_DISTANCE && Math.abs(velocityX) > SWIPE_THRESHOLD_VELOCITY) { //From Left to Right return true; } if (e1.getY() - e2.getY() > SWIPE_MIN_DISTANCE && Math.abs(velocityY) > SWIPE_THRESHOLD_VELOCITY) { //From Bottom to Top return true; } else if (e2.getY() - e1.getY() > SWIPE_MIN_DISTANCE && Math.abs(velocityY) > SWIPE_THRESHOLD_VELOCITY) { //From Top to Bottom return true; } return false; } @Override public boolean onDown(MotionEvent e) { //always return true since all gestures always begin with onDown and<br> //if this returns false, the framework won't try to pick up onFling for example. return true; } }

Read the article

how to label a cuboid using open gl?

- by usha

hi this is how my 3dcuboid looks ,i have attached complete code , i want to label this cuboid using different name across sides how is it possible using opengl in android...plz help me out public class MyGLRenderer implements Renderer { Context context; Cuboid rect; private float mCubeRotation; // private static float angleCube = 0; // Rotational angle in degree for cube (NEW) // private static float speedCube = -1.5f; // Rotational speed for cube (NEW) public MyGLRenderer(Context context) { rect = new Cuboid(); this.context = context; } public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glLoadIdentity(); // Reset the model-view matrix gl.glTranslatef(0.2f, 0.0f, -8.0f); // Translate right and into the screen gl.glScalef(0.8f, 0.8f, 0.8f); // Scale down (NEW) gl.glRotatef(mCubeRotation, 1.0f, 1.0f, 1.0f); // gl.glRotatef(angleCube, 1.0f, 1.0f, 1.0f); // rotate about the axis (1,1,1) (NEW) rect.draw(gl); mCubeRotation -= 0.15f; //angleCube += speedCube; } public void onSurfaceChanged(GL10 gl, int width, int height) { // TODO Auto-generated method stub if (height == 0) height = 1; // To prevent divide by zero float aspect = (float)width / height; // Set the viewport (display area) to cover the entire window gl.glViewport(0, 0, width, height); // Setup perspective projection, with aspect ratio matches viewport gl.glMatrixMode(GL10.GL_PROJECTION); // Select projection matrix gl.glLoadIdentity(); // Reset projection matrix // Use perspective projection GLU.gluPerspective(gl, 45, aspect, 0.1f, 100.f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select model-view matrix gl.glLoadIdentity(); // Reset } public void onSurfaceCreated(GL10 gl, EGLConfig config) { // TODO Auto-generated method stub gl.glClearColor(0.0f, 0.0f, 0.0f, 1.0f); // Set color's clear-value to black gl.glClearDepthf(1.0f); // Set depth's clear-value to farthest gl.glEnable(GL10.GL_DEPTH_TEST); // Enables depth-buffer for hidden surface removal gl.glDepthFunc(GL10.GL_LEQUAL); // The type of depth testing to do gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); // nice perspective view gl.glShadeModel(GL10.GL_SMOOTH); // Enable smooth shading of color gl.glDisable(GL10.GL_DITHER); // Disable dithering for better performance }} public class Cuboid{ private FloatBuffer mVertexBuffer; private FloatBuffer mColorBuffer; private ByteBuffer mIndexBuffer; private float vertices[] = { //width,height,depth -2.5f, -1.0f, -1.0f, 1.0f, -1.0f, -1.0f, 1.0f, 1.0f, -1.0f, -2.5f, 1.0f, -1.0f, -2.5f, -1.0f, 1.0f, 1.0f, -1.0f, 1.0f, 1.0f, 1.0f, 1.0f, -2.5f, 1.0f, 1.0f }; private float colors[] = { // R,G,B,A COLOR 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 1.0f, 1.0f }; private byte indices[] = { // VERTEX 0,1,2,3,4,5,6,7 REPRESENTATION FOR FACES 0, 4, 5, 0, 5, 1, 1, 5, 6, 1, 6, 2, 2, 6, 7, 2, 7, 3, 3, 7, 4, 3, 4, 0, 4, 7, 6, 4, 6, 5, 3, 0, 1, 3, 1, 2 }; public Cuboid() { ByteBuffer byteBuf = ByteBuffer.allocateDirect(vertices.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mVertexBuffer = byteBuf.asFloatBuffer(); mVertexBuffer.put(vertices); mVertexBuffer.position(0); byteBuf = ByteBuffer.allocateDirect(colors.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mColorBuffer = byteBuf.asFloatBuffer(); mColorBuffer.put(colors); mColorBuffer.position(0); mIndexBuffer = ByteBuffer.allocateDirect(indices.length); mIndexBuffer.put(indices); mIndexBuffer.position(0); } public void draw(GL10 gl) { gl.glFrontFace(GL10.GL_CW); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, mVertexBuffer); gl.glColorPointer(4, GL10.GL_FLOAT, 0, mColorBuffer); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glDrawElements(GL10.GL_TRIANGLES, 36, GL10.GL_UNSIGNED_BYTE, mIndexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } } public class Draw3drect extends Activity { private GLSurfaceView glView; // Use GLSurfaceView // Call back when the activity is started, to initialize the view @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); glView = new GLSurfaceView(this); // Allocate a GLSurfaceView glView.setRenderer(new MyGLRenderer(this)); // Use a custom renderer this.setContentView(glView); // This activity sets to GLSurfaceView } // Call back when the activity is going into the background @Override protected void onPause() { super.onPause(); glView.onPause(); } // Call back after onPause() @Override protected void onResume() { super.onResume(); glView.onResume(); } }

Read the article

How to get distinct values from the List<T> with LINQ

- by Vincent Maverick Durano

Recently I was working with data from a generic List<T> and one of my objectives is to get the distinct values that is found in the List. Consider that we have this simple class that holds the following properties: public class Product { public string Make { get; set; } public string Model { get; set; } } Now in the page code behind we will create a list of product by doing the following: private List<Product> GetProducts() { List<Product> products = new List<Product>(); Product p = new Product(); p.Make = "Samsung"; p.Model = "Galaxy S 1"; products.Add(p); p = new Product(); p.Make = "Samsung"; p.Model = "Galaxy S 2"; products.Add(p); p = new Product(); p.Make = "Samsung"; p.Model = "Galaxy Note"; products.Add(p); p = new Product(); p.Make = "Apple"; p.Model = "iPhone 4"; products.Add(p); p = new Product(); p.Make = "Apple"; p.Model = "iPhone 4s"; products.Add(p); p = new Product(); p.Make = "HTC"; p.Model = "Sensation"; products.Add(p); p = new Product(); p.Make = "HTC"; p.Model = "Desire"; products.Add(p); p = new Product(); p.Make = "Nokia"; p.Model = "Some Model"; products.Add(p); p = new Product(); p.Make = "Nokia"; p.Model = "Some Model"; products.Add(p); p = new Product(); p.Make = "Sony Ericsson"; p.Model = "800i"; products.Add(p); p = new Product(); p.Make = "Sony Ericsson"; p.Model = "800i"; products.Add(p); return products; } And then let’s bind the products to the GridView. protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { Gridview1.DataSource = GetProducts(); Gridview1.DataBind(); } } Running the code will display something like this in the page: Now what I want is to get the distinct row values from the list. So what I did is to use the LINQ Distinct operator and unfortunately it doesn't work. In order for it work is you must use the overload method of the Distinct operator for you to get the desired results. So I’ve added this IEqualityComparer<T> class to compare values: class ProductComparer : IEqualityComparer<Product> { public bool Equals(Product x, Product y) { if (Object.ReferenceEquals(x, y)) return true; if (Object.ReferenceEquals(x, null) || Object.ReferenceEquals(y, null)) return false; return x.Make == y.Make && x.Model == y.Model; } public int GetHashCode(Product product) { if (Object.ReferenceEquals(product, null)) return 0; int hashProductName = product.Make == null ? 0 : product.Make.GetHashCode(); int hashProductCode = product.Model.GetHashCode(); return hashProductName ^ hashProductCode; } } After that you can then bind the GridView like this: protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { Gridview1.DataSource = GetProducts().Distinct(new ProductComparer()); Gridview1.DataBind(); } } Running the page will give you the desired output below: As you notice, it now eliminates the duplicate rows in the GridView. Now what if we only want to get the distinct values for a certain field. For example I want to get the distinct “Make” values such as Samsung, Apple, HTC, Nokia and Sony Ericsson and populate them to a DropDownList control for filtering purposes. I was hoping the the Distinct operator has an overload that can compare values based on the property value like (GetProducts().Distinct(o => o.PropertyToCompare). But unfortunately it doesn’t provide that overload so what I did as a workaround is to use the GroupBy,Select and First LINQ query operators to achieve what I want. Here’s the code to get the distinct values of a certain field. protected void Page_Load(object sender, EventArgs e) { if (!IsPostBack) { DropDownList1.DataSource = GetProducts().GroupBy(o => o.Make).Select(o => o.First()); DropDownList1.DataTextField = "Make"; DropDownList1.DataValueField = "Model"; DropDownList1.DataBind(); } } Running the code will display the following output below: That’s it! I hope someone find this post useful!

Read the article

Slide navigation problem multiple div movement

- by littleMan

I have almost figured it out but still doesn't quite work the way i want it to. my problem is this part. It scrolls the first element to the left but the second element just appears and doesn't scroll does anyone know what todo here. var i = jQuery('.wikiform .wizard .view').size(); jQuery('.wikiform .navigation input[name^=Next]').click(function () { jQuery('.wikiform .wizard .view').each(function (j) { jQuery(this).animate({ marginLeft: -(current.next().width() * (i - j)) }, 750); /*line above Im having problems with ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ current = current.next(); j++; }); }); my complete code down below test it out and see what Im doing wrong (function ($) { $.fn.WikiForm = function (options) { this.Mode = options.mode || 'CancelOk' || 'Ok' || 'Wizard'; var current = jQuery('.wikiform .view:first'); function positionForm() { jQuery('body') .css('overflow-y', 'hidden'); jQuery('<div id="overlay"></div>') .insertBefore('.wikiform') .css('top', jQuery(document).scrollTop()) .animate({ 'opacity': '0.8' }, 'slow'); jQuery('.wikiform') .css('height', jQuery('.wikiform .wizard .view:first').height() + jQuery('.wikiform .navigation').height()) .css('top', window.screen.availHeight / 2 - jQuery('.wikiform').height() / 2) .css('width', jQuery('.wikiform .wizard .view:first').width()) .css('left', -jQuery('.wikiform').width()) .animate({ marginLeft: jQuery(document).width() / 2 + jQuery('.wikiform').width() / 2 }, 750); jQuery('.wikiform .wizard') .css('overflow', 'hidden') .css('height', jQuery('.wikiform .wizard .view:first').height()); } if (this.Mode == "Wizard") { return this.each(function () { positionForm(); //alert(current.next().width()); var i = jQuery('.wikiform .wizard .view').size(); jQuery('.wikiform .navigation input[name^=Next]').click(function () { jQuery('.wikiform .wizard .view').each(function (j) { jQuery(this).animate({ marginLeft: -(current.next().width() * (i - j)) }, 750); current = current.next(); j++; }); }); jQuery('.wikiform .navigation input[name^=Back]').click(function () { }); }); } else if (this.Mode == "CancelOk") { return this.each(function () { }); } else { return this.each(function () { }); } }; })(jQuery); $(document).ready(function () { jQuery(window).bind("load", function () { jQuery(".wikiform").WikiForm({ mode: 'Wizard', speed:750, ease:"expoinout" }); }); }); <style type="text/css"> body { margin:0px; } #overlay { background-color:Black; position:absolute; top:0; left:0; height:100%; width:100%; } .wikiform { background-color:Green; position:absolute; } .wikiform .wizard { clear: both; } .wizard { position: relative; left: 0; top: 0; width: 100%; list-style-type: none; } .wizard .view { float:left; } .view .form { } .navigation { float:right; clear:left } #view1 { background-color:Aqua; width:300px; height:300px; } #view2 { background-color:Fuchsia; width:300px; height:300px; } </style> <title></title></head><body><form action="" method=""><div id="layout"><div id="header"> Header </div> <div id="content" style="height:2000px"> Content </div> <div id="footer"> Footer </div> </div> <div id="formView1" class="wikiform"> <div class="wizard"> <div id="view1" class="view"> <div class="form"> Content 1 </div> </div> <div id="view2" class="view"> <div class="form"> Content 2 </div> </div> </div> <div class="navigation"> <input type="button" name="Back" value=" Back " /> <input type="button" name="Next " class="Next" value=" Next " /> <input type="button" name="Cancel" value="Cancel" /> </div> </div>

Read the article

Encrypt images before uploading to Dropbox [migrated]

- by Cherry

I want to encrypt a file first before the file will be uploaded to the dropbox. So i have implement the encryption inside the uploading of the codes. However, there is an error after i integrate the codes together. Where did my mistake go wrong? Error at putFileOverwriteRequest and it says The method putFileOverwriteRequest(String, InputStream, long, ProgressListener) in the type DropboxAPI is not applicable for the arguments (String, FileOutputStream, long, new ProgressListener(){}) Another problem is that this FileOutputStream fis = new FileOutputStream(new File("dont know what to put in this field")); i do not know where to put the file so that after i read the file, it will call the path and then upload to the Dropbox. Anyone is kind to help me in this? As time is running out for me and i still cant solve the problem. Thank you in advance. The full code is as below. public class UploadPicture extends AsyncTask<Void, Long, Boolean> { private DropboxAPI<?> mApi; private String mPath; private File mFile; private long mFileLen; private UploadRequest mRequest; private Context mContext; private final ProgressDialog mDialog; private String mErrorMsg; public UploadPicture(Context context, DropboxAPI<?> api, String dropboxPath, File file) { // We set the context this way so we don't accidentally leak activities mContext = context.getApplicationContext(); mFileLen = file.length(); mApi = api; mPath = dropboxPath; mFile = file; mDialog = new ProgressDialog(context); mDialog.setMax(100); mDialog.setMessage("Uploading " + file.getName()); mDialog.setProgressStyle(ProgressDialog.STYLE_HORIZONTAL); mDialog.setProgress(0); mDialog.setButton("Cancel", new OnClickListener() { public void onClick(DialogInterface dialog, int which) { // This will cancel the putFile operation mRequest.abort(); } }); mDialog.show(); } @Override protected Boolean doInBackground(Void... params) { try { KeyGenerator keygen = KeyGenerator.getInstance("DES"); SecretKey key = keygen.generateKey(); //generate key //encrypt file here first byte[] plainData; byte[] encryptedData; Cipher cipher = Cipher.getInstance("DES/ECB/PKCS5Padding"); cipher.init(Cipher.ENCRYPT_MODE, key); //File f = new File(mFile); //read file FileInputStream in = new FileInputStream(mFile); //obtains input bytes from a file plainData = new byte[(int)mFile.length()]; in.read(plainData); //Read bytes of data into an array of bytes encryptedData = cipher.doFinal(plainData); //encrypt data FileOutputStream fis = new FileOutputStream(new File("dont know what to put in this field")); //upload to a path first then call the path so that it can be uploaded up to the dropbox //save encrypted file to dropbox // By creating a request, we get a handle to the putFile operation, // so we can cancel it later if we want to //FileInputStream fis = new FileInputStream(mFile); String path = mPath + mFile.getName(); mRequest = mApi.putFileOverwriteRequest(path, fis, mFile.length(), new ProgressListener() { @Override public long progressInterval() { // Update the progress bar every half-second or so return 500; } @Override public void onProgress(long bytes, long total) { publishProgress(bytes); } }); if (mRequest != null) { mRequest.upload(); return true; } } catch (DropboxUnlinkedException e) { // This session wasn't authenticated properly or user unlinked mErrorMsg = "This app wasn't authenticated properly."; } catch (DropboxFileSizeException e) { // File size too big to upload via the API mErrorMsg = "This file is too big to upload"; } catch (DropboxPartialFileException e) { // We canceled the operation mErrorMsg = "Upload canceled"; } catch (DropboxServerException e) { // Server-side exception. These are examples of what could happen, // but we don't do anything special with them here. if (e.error == DropboxServerException._401_UNAUTHORIZED) { // Unauthorized, so we should unlink them. You may want to // automatically log the user out in this case. } else if (e.error == DropboxServerException._403_FORBIDDEN) { // Not allowed to access this } else if (e.error == DropboxServerException._404_NOT_FOUND) { // path not found (or if it was the thumbnail, can't be // thumbnailed) } else if (e.error == DropboxServerException._507_INSUFFICIENT_STORAGE) { // user is over quota } else { // Something else } // This gets the Dropbox error, translated into the user's language mErrorMsg = e.body.userError; if (mErrorMsg == null) { mErrorMsg = e.body.error; } } catch (DropboxIOException e) { // Happens all the time, probably want to retry automatically. mErrorMsg = "Network error. Try again."; } catch (DropboxParseException e) { // Probably due to Dropbox server restarting, should retry mErrorMsg = "Dropbox error. Try again."; } catch (DropboxException e) { // Unknown error mErrorMsg = "Unknown error. Try again."; } catch (FileNotFoundException e) { } return false; } @Override protected void onProgressUpdate(Long... progress) { int percent = (int)(100.0*(double)progress[0]/mFileLen + 0.5); mDialog.setProgress(percent); } @Override protected void onPostExecute(Boolean result) { mDialog.dismiss(); if (result) { showToast("Image successfully uploaded"); } else { showToast(mErrorMsg); } } private void showToast(String msg) { Toast error = Toast.makeText(mContext, msg, Toast.LENGTH_LONG); error.show(); } }

Read the article

listbox isSelected databinding in DataTemplate

- by Kinmarui

I try to simply databind IsSelected property with IsSelected field in my class. But after I change the value in code its doesn't change the property, neither does clicking on ListBoxItem change the field value. XAML: <FlipView ItemsSource="{Binding Source={StaticResource itemsViewSource}}" ... > <FlipView.ItemTemplate> <DataTemplate> <UserControl Loaded="StartLayoutUpdates" Unloaded="StopLayoutUpdates">  <ListBox Grid.Row="1" Grid.ColumnSpan="3" SelectionMode="Multiple" VerticalAlignment="Center" ItemsSource="{Binding Answers}"> <ListBox.Resources> <local:LogicToText x:Key="logToText" /> </ListBox.Resources>  <ItemsControl.ItemTemplate> <DataTemplate> <ListBoxItem IsSelected="{Binding IsSelected, Mode=TwoWay, Converter={StaticResource logToText}}" Content="{Binding IsSelected, Mode=TwoWay, Converter={StaticResource logToText}}"> </ListBoxItem> </DataTemplate> </ItemsControl.ItemTemplate>  </ListBox> </UserControl> </DataTemplate> </FlipView.ItemTemplate> </FlipView> Code: Answers private ObservableCollection<PrawoJazdyDataAnswer> _answers = new ObservableCollection<PrawoJazdyDataAnswer>(); public ObservableCollection<PrawoJazdyDataAnswer> Answers { get { return this._answers; } } Single item(Answer) public class PrawoJazdyDataAnswer : NPCHelper// PrawoJazdy.Common.BindableBase { public PrawoJazdyDataAnswer(String ans, bool ansb) { this._ans = ans; this._isSelected = ansb; } public override string ToString() { return _isSelected.ToString(); } //Only For debug purposes normally return _ans; private string _ans; public string Ans { get { return this._ans; } //set { this.SetProperty(ref this._ans, value); } } private bool _isSelected; public bool IsSelected { get { return this._isSelected; } set { _isSelected = value; FirePropertyChanged("IsSelected"); //this.SetProperty(ref this._isSelected, value); } } } FirePropertyChanged public class NPCHelper : INotifyPropertyChanged { public event PropertyChangedEventHandler PropertyChanged; public void FirePropertyChanged(string prop) { if (PropertyChanged != null) PropertyChanged(this, new PropertyChangedEventArgs(prop)); } } Converter(which sometimes seems to be needed and others not..., I tried ~10 approaches from different tutorials/examples) public class LogicToText : IValueConverter { /// <summary> /// /// </summary> public object Convert(object value, Type targetType, object parameter, string language) { //if (value == null || (bool)value == false) // return "False"; return value.ToString(); } /// <summary> /// /// </summary> public object ConvertBack(object value, Type targetType, object parameter, string language) { return value.ToString().Contains("True") ? true : false; } Thanks in advance, and sorry for my English(still learning). @edit Thanks for quick reply. For test purposes i created a button and text block: It's in other controls part (above list box, but in FlipView) <Button Click="spr" >Sprawdz</Button> <TextBlock Text="{Binding Answers[0].IsSelected, Mode=TwoWay}" > </TextBlock> Click method private void spr(object sender, RoutedEventArgs e) { var ans = ((PrawoJazdyDataQuestion)this.flipView.SelectedItem).Answers; foreach (var item in ans) item.IsSelected = item.IsSelected ? false : true; } As I wrote when i'm changing data from code side its change text, but not appearance of ListBoxItem, and if i just select it on ListBox its doesn't change the date i textblock neither in ListBox itself.

Read the article

Configuring Fed Authentication Methods in OIF / IdP

- by Damien Carru

In this article, I will provide examples on how to configure OIF/IdP to map OAM Authentication Schemes to Federation Authentication Methods, based on the concepts introduced in my previous entry. I will show examples for the three protocols supported by OIF: SAML 2.0 SSO SAML 1.1 SSO OpenID 2.0 Enjoy the reading! Configuration As I mentioned in my previous article, mapping Federation Authentication Methods to OAM Authentication Schemes is protocol dependent, since the methods are defined in the various protocols (SAML 2.0, SAML 1.1, OpenID 2.0). As such, the WLST commands to set those mappings will involve: Either the SP Partner Profile and affect all Partners referencing that profile, which do not override the Federation Authentication Method to OAM Authentication Scheme mappings Or the SP Partner entry, which will only affect the SP Partner It is important to note that if an SP Partner is configured to define one or more Federation Authentication Method to OAM Authentication Scheme mappings, then all the mappings defined in the SP Partner Profile will be ignored. WLST Commands The two OIF WLST commands that can be used to define mapping Federation Authentication Methods to OAM Authentication Schemes are: addSPPartnerProfileAuthnMethod() to define a mapping on an SP Partner Profile, taking as parameters: The name of the SP Partner Profile The Federation Authentication Method The OAM Authentication Scheme name addSPPartnerAuthnMethod() to define a mapping on an SP Partner , taking as parameters: The name of the SP Partner The Federation Authentication Method The OAM Authentication Scheme name Note: I will discuss in a subsequent article the other parameters of those commands. In the next sections, I will show examples on how to use those methods: For SAML 2.0, I will configure the SP Partner Profile, that will apply all the mappings to SP Partners referencing this profile, unless they override mapping definition For SAML 1.1, I will configure the SP Partner. For OpenID 2.0, I will configure the SP/RP Partner SAML 2.0 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 2.0 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use BasicScheme as the Authentication Scheme Map BasicSessionScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:Password Federation Authentication Method Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> BasicScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to BasicScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "BasicScheme") Exit the WLST environment:exit() The user will now be challenged via HTTP Basic Authentication defined in the BasicScheme for AcmeSP. Also, as noted earlier, the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via HTTP Basic Authentication, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping BasicScheme To change the Federation Authentication Method mapping for the BasicScheme to urn:oasis:names:tc:SAML:2.0:ac:classes:Password instead of urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport for the saml20-sp-partner-profile SAML 2.0 SP Partner Profile (the profile to which my AcmeSP Partner is bound to), I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:Password", "BasicScheme") Exit the WLST environment:exit() After authentication via HTTP Basic Authentication, OIF/IdP would now issue an Assertion similar to (see that the AuthnContextClassRef was changed from PasswordProtectedTransport to Password): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:Password </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner Profile to OAMLDAPPluginAuthnScheme instead of BasicScheme. I will use the OIF WLST setSPPartnerProfileDefaultScheme() command and specify which scheme to be used as the default for the SP Partner Profile referenced by AcmeSP (which is saml20-sp-partner-profile in this case: getFedPartnerProfile("AcmeSP", "sp") ): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerProfileDefaultScheme() command:setSPPartnerProfileDefaultScheme("saml20-sp-partner-profile", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will now be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme and BasicScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods. As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthnContextClassRef set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> OAMLDAPPluginAuthnScheme </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To add the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport mapping, I will execute the addSPPartnerProfileAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerProfileAuthnMethod() command:addSPPartnerProfileAuthnMethod("saml20-sp-partner-profile", "urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to PasswordProtectedTransport): <samlp:Response ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success"/> </samlp:Status> <saml:Assertion ...> <saml:Issuer ...>https://idp.com/oam/fed</saml:Issuer> <dsig:Signature> ... </dsig:Signature> <saml:Subject> <saml:NameID ...>[email protected]</saml:NameID> <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <saml:SubjectConfirmationData .../> </saml:SubjectConfirmation> </saml:Subject> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthnInstant="2014-03-21T20:53:55Z" SessionIndex="id-6i-Dm0yB-HekG6cejktwcKIFMzYE8Yrmqwfd0azz" SessionNotOnOrAfter="2014-03-21T21:53:55Z"> <saml:AuthnContext> <saml:AuthnContextClassRef> urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport </saml:AuthnContextClassRef> </saml:AuthnContext> </saml:AuthnStatement> </saml:Assertion></samlp:Response> SAML 1.1 Test Setup In this setup, OIF is acting as an IdP and is integrated with a remote SAML 1.1 SP partner identified by AcmeSP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Use OAMLDAPPluginAuthnScheme as the Authentication Scheme Map OAMLDAPPluginAuthnScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport Federation Authentication Method LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. Also the default Federation Authentication Method mappings configuration maps only the urn:oasis:names:tc:SAML:1.0:am:password to LDAPScheme (also marked as the default scheme used for authentication), FAAuthScheme, BasicScheme and BasicFAScheme. After authentication via FORM, OIF/IdP would issue an Assertion similar to: <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OAMLDAPPluginAuthnScheme as Authentication Scheme For this test, I will switch the default Authentication Scheme for the SP Partner to OAMLDAPPluginAuthnScheme instead of LDAPScheme. I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for the SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() The user will be challenged via FORM defined in the OAMLDAPPluginAuthnScheme for AcmeSP. Contrarily to LDAPScheme, the OAMLDAPPluginAuthnScheme is not mapped by default to any Federation Authentication Methods (in the SP Partner Profile). As such, OIF/IdP will not be able to find a Federation Authentication Method and will set the method in the SAML Assertion to the OAM Authentication Scheme name. After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to OAMLDAPPluginAuthnScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="OAMLDAPPluginAuthnScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping OAMLDAPPluginAuthnScheme To map the OAMLDAPPluginAuthnScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password for this SP Partner only, I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "OAMLDAPPluginAuthnScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from OAMLDAPPluginAuthnScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> LDAPScheme as Authentication Scheme I will now show that by defining a Federation Authentication Mapping at the Partner level, this now ignores all mappings defined at the SP Partner Profile level. For this test, I will switch the default Authentication Scheme for this SP Partner back to LDAPScheme, and the Assertion issued by OIF/IdP will not be able to map this LDAPScheme to a Federation Authentication Method anymore, since A Federation Authentication Method mapping is defined at the SP Partner level and thus the mappings defined at the SP Partner Profile are ignored The LDAPScheme is not listed in the mapping at the Partner level I will use the OIF WLST setSPPartnerDefaultScheme() command and specify which scheme to be used as the default for this SP Partner: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the setSPPartnerDefaultScheme() command:setSPPartnerDefaultScheme("AcmeSP", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would issue an Assertion similar to (see the AuthenticationMethod set to LDAPScheme): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="LDAPScheme"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> Mapping LDAPScheme at Partner Level To fix this issue, we will need to add the LDAPScheme to the Federation Authentication Method urn:oasis:names:tc:SAML:1.0:am:password mapping for this SP Partner only. I will execute the addSPPartnerAuthnMethod() method: Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeSP", "urn:oasis:names:tc:SAML:1.0:am:password", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to password): <samlp:Response ...> <samlp:Status> <samlp:StatusCode Value="samlp:Success"/> </samlp:Status> <saml:Assertion Issuer="https://idp.com/oam/fed" ...> <saml:Conditions ...> <saml:AudienceRestriction> <saml:Audience>https://acme.com/sp/ssov11</saml:Audience> </saml:AudienceRestriction> </saml:Conditions> <saml:AuthnStatement AuthenticationInstant="2014-03-21T20:53:55Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password"> <saml:Subject> <saml:NameIdentifier ...>[email protected]</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod> urn:oasis:names:tc:SAML:1.0:cm:bearer </saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthnStatement> <dsig:Signature> ... </dsig:Signature> </saml:Assertion></samlp:Response> OpenID 2.0 In the OpenID 2.0 flows, the RP must request use of PAPE, in order for OIF/IdP/OP to include PAPE information. For OpenID 2.0, the configuration will involve mapping a list of OpenID 2.0 policies to a list of Authentication Schemes. The WLST command will take a list of policies, delimited by the ',' character, instead of SAML 2.0 or SAML 1.1 where a single Federation Authentication Method had to be specified. Test Setup In this setup, OIF is acting as an IdP/OP and is integrated with a remote OpenID 2.0 SP/RP partner identified by AcmeRP. In this test, I will perform Federation SSO with OIF/IdP configured to: Use LDAPScheme as the Authentication Scheme Map LDAPScheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods (the second one is a custom for this use case) LDAPScheme as Authentication Scheme Using the OOTB settings regarding user authentication in OAM, the user will be challenged via a FORM based login page based on the LDAPScheme. No Federation Authentication Method is defined OOTB for OpenID 2.0, so if the IdP/OP issue an SSO response with a PAPE Response element, it will specify the scheme name instead of Federation Authentication Methods After authentication via FORM, OIF/IdP would issue an SSO Response similar to: https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=LDAPScheme&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D Mapping LDAPScheme To map the LDAP Scheme to the http://schemas.openid.net/pape/policies/2007/06/phishing-resistant and http://openid-policies/password-protected policies Federation Authentication Methods, I will execute the addSPPartnerAuthnMethod() method (the policies will be comma separated): Enter the WLST environment by executing:$IAM_ORACLE_HOME/common/bin/wlst.sh Connect to the WLS Admin server:connect() Navigate to the Domain Runtime branch:domainRuntime() Execute the addSPPartnerAuthnMethod() command:addSPPartnerAuthnMethod("AcmeRP", "http://schemas.openid.net/pape/policies/2007/06/phishing-resistant,http://openid-policies/password-protected", "LDAPScheme") Exit the WLST environment:exit() After authentication via FORM, OIF/IdP would now issue an Assertion similar to (see that the method was changed from LDAPScheme to the two policies): https://acme.com/openid?refid=id-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.ns=http%3A%2F%2Fspecs.openid.net%2Fauth%2F2.0&openid.mode=id_res&openid.op_endpoint=https%3A%2F%2Fidp.com%2Fopenid&openid.claimed_id=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.identity=https%3A%2F%2Fidp.com%2Fopenid%3Fid%3Did-38iCmmlAVEXPsFjnFVKArfn5RIiF75D5doorhEgqqPM%3D&openid.return_to=https%3A%2F%2Facme.com%2Fopenid%3Frefid%3Did-9PKVXZmRxAeDYcgLqPm36ClzOMA-&openid.response_nonce=2014-03-24T19%3A20%3A06Zid-YPa2kTNNFftZkgBb460jxJGblk2g--iNwPpDI7M1&openid.assoc_handle=id-6a5S6zhAKaRwQNUnjTKROREdAGSjWodG1el4xyz3&openid.ns.ax=http%3A%2F%2Fopenid.net%2Fsrv%2Fax%2F1.0&openid.ax.mode=fetch_response&openid.ax.type.attr0=http%3A%2F%2Fsession%2Fcount&openid.ax.value.attr0=1&openid.ax.type.attr1=http%3A%2F%2Fopenid.net%2Fschema%2FnamePerson%2Ffriendly&openid.ax.value.attr1=My+name+is+Bobby+Smith&openid.ax.type.attr2=http%3A%2F%2Fschemas.openid.net%2Fax%2Fapi%2Fuser_id&openid.ax.value.attr2=bob&openid.ax.type.attr3=http%3A%2F%2Faxschema.org%2Fcontact%2Femail&openid.ax.value.attr3=bob%40oracle.com&openid.ax.type.attr4=http%3A%2F%2Fsession%2Fipaddress&openid.ax.value.attr4=10.145.120.253&openid.ns.pape=http%3A%2F%2Fspecs.openid.net%2Fextensions%2Fpape%2F1.0&openid.pape.auth_time=2014-03-24T19%3A20%3A05Z&openid.pape.auth_policies=http%3A%2F%2Fschemas.openid.net%2Fpape%2Fpolicies%2F2007%2F06%2Fphishing-resistant+http%3A%2F%2Fopenid-policies%2Fpassword-protected&openid.signed=op_endpoint%2Cclaimed_id%2Cidentity%2Creturn_to%2Cresponse_nonce%2Cassoc_handle%2Cns.ax%2Cax.mode%2Cax.type.attr0%2Cax.value.attr0%2Cax.type.attr1%2Cax.value.attr1%2Cax.type.attr2%2Cax.value.attr2%2Cax.type.attr3%2Cax.value.attr3%2Cax.type.attr4%2Cax.value.attr4%2Cns.pape%2Cpape.auth_time%2Cpape.auth_policies&openid.sig=mYMgbGYSs22l8e%2FDom9NRPw15u8%3D In the next article, I will cover how OIF/IdP can be configured so that an SP can request a specific Federation Authentication Method to challenge the user during Federation SSO.Cheers,Damien Carru

Search Results

Search found 15661 results on 627 pages for 'protected mode'.

Page 133/627 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140 | Next Page >

- by Rantanplan

- by Rick Strahl

- by Asian Angel

- by robcarrol

- by Vincent Maverick Durano

- by Jason Ulloa

- by iacopo

- by user1898041

- by DigiMortal

- by PyRulez

- by Drew S

- by Ricardo Peres

- by user121917

- by Sean

- by usha

- by littleMan

- by Frank

- by Cerin

- by Adam Short

- by usha

- by Vincent Maverick Durano

- by littleMan

- by Cherry

- by Kinmarui

- by Damien Carru

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140 | Next Page >