Search Results

Search found 3707 results on 149 pages for 'secure'.

Page 133/149 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

  • Stop squid caching 302 and 307 with deny_info

    - by 0xception
    TLDR: 302, 307 and Error pages are being cached. Need to force a refresh of the content. Long version: I've setup a very minimal squid instance running on a gateway which shouldn't not cache ANYTHING but needs to be solely used as a domain based web filter. I'm using another application which redirects un-authenticated users to the proxy which then uses the deny_info option redirects any non-whitelisted request to the login page. After the user has authenticated the firewall rule gets placed so they no longer get sent to the proxy. The problem is that when a user hits a website (xkcd.com) they are unauthenticated so they get redirected via the firewall: iptables -A unknown-user -t nat -p tcp --dport 80 -j REDIRECT --to-port 39135 to the proxy at this point squid redirects the user to the login page using a 302 (i've also tried 307, and i've also make sure the headers are set to no-cache and/or no-store for Cache-Control and Pragma). Then when the user logs into the system they get firewall rule which no longer directs them to the squid proxy. But if they go to xkcd.com again they will have the original redirection page cached and will once again get the login page. Any idea how to force these redirects to NOT be cached by the browser? Perhaps this is a problem w/ the browsers and not squid, but not sure how to get around it. Full squid config below. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl localnet src 192.168.182.0/23 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl https port 443 acl http port 80 acl CONNECT method CONNECT # # Disable Cache # cache deny all via off negative_ttl 0 seconds refresh_all_ims on #error_default_language en # Allow manager access only from localhost http_access allow manager localhost http_access deny manager # Deny access to anything other then http http_access deny !http # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !https visible_hostname gate.ovatn.net # Disable memory pooling memory_pools off # Never use neigh cache objects for cgi-bin scripts hierarchy_stoplist cgi-bin ? # # URL rewrite Test Settings # #acl whitelist dstdomain "/etc/squid/domains-pre.lst" #url_rewrite_program /usr/lib/squid/redirector #url_rewrite_access allow !whitelist #url_rewrite_children 5 startup=0 idle=1 concurrency=0 #http_access allow all # # Deny Info Error Test # acl whitelist dstdomain "/etc/squid/domains-pre.lst" deny_info http://login.domain.com/ whitelist #deny_info ERR_ACCESS_DENIED whitelist http_access deny !whitelist http_access allow whitelist http_port 39135 transparent ## Debug Values access_log /var/log/squid/access-pre.log cache_log /var/log/squid/cache-pre.log # Production Values #access_log /dev/null #cache_log /dev/null # Set PID file pid_filename /var/run/gatekeeper-pre.pid SOLUTION: I believe I might have found a solution to this. After days and days trying to figure it out, only through a random stumble I found client_persistent_connections off server_persistent_connections off This did the trick. So it wasn't so much cache as it was a single persistent connection messing things up. W000T!

    Read the article

  • web services access not being reached thru the web browser

    - by Tony
    I am trying to reference my .asmx webservices in .NET but my server is not exposed to the internet. When I put on the following address I get the message mentioned below. What's the reason for not being able to see the directory? Am I missing something in my IIS configuraction? Am I missing anything in my permissions? Just as reference I have other folders with webservices and I have the same issue. When I login to the server I am doing it with my windows user and password (I am using windows authentication). It's necessary to mention that when I put the URL I am getting a popup screen to put in my userid and password but it seems that's not able to validate since keeps asking me a couple of times. Let me know if you need more information to address this issue . http://appsvr02/Inetpub/wwwroot/DevWebApi/ Internet Explorer cannot display the webpage What you can try: It appears you are connected to the Internet, but you might want to try to reconnect to the Internet. Retype the address. Go back to the previous page. Most likely causes: •You are not connected to the Internet. •The website is encountering problems. •There might be a typing error in the address. More information This problem can be caused by a variety of issues, including: •Internet connectivity has been lost. •The website is temporarily unavailable. •The Domain Name Server (DNS) is not reachable. •The Domain Name Server (DNS) does not have a listing for the website's domain. •If this is an HTTPS (secure) address, click tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds 1.Click the Favorites Center button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages) 1.Click Tools , and then click Work Offline. 2.Click the Favorites Center button , click History, and then click the page you want to view.

    Read the article

  • Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

    - by itchy355
    I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

    Read the article

  • Squid Proxy: url_regex acl is not working?

    - by bharathi
    I am using squid proxy 3.1 in ubuntu machine. I want to allow only urls matching our pattern through our proxy server. I configured acl like below. Acl for dstdomain is working fine. If i access any url besides .zmedia.com , I got proxy connection refused. But the url_regex is not working. What i am trying here is. Allow only request from ".zmedia.com" domain and the request url should be in "/blog" context. # # Recommended minimum configuration: # acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 ::1 acl urlwhitelist url_regex -i ^http(s)://([a-zA-Z]+).zmedia.com/blog/.*$ acl allowdomain dstdomain .zmedia.com acl Safe_ports port 80 8080 8500 7272 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl SSL_ports port 7272 # multiling http acl CONNECT method CONNECT # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager http_access deny !allowdomain http_access allow urlwhitelist http_access allow CONNECT SSL_ports http_access deny CONNECT !SSL_ports # Deny requests to certain unsafe ports http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localhost # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. #cache_dir ufs /var/spool/squid 100 16 256 # Leave coredumps in the first cache dir coredump_dir /var/spool/squid append_domain .zmedia.com # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 Please correct me , If i did anything wrong?

    Read the article

  • Win 8: Adding a boot volume to an MBR dynamic disk [NOT about changing to basic disks]

    - by Stilez
    (This is NOT aiming to convert to basic disk. In this question, the disk stays dynamic but becomes bootable) There doesn't seem to be a clear, well stated answer I can find, for the question "What are the criteria for Windows 8 to successfully boot from an MBR dynamic disk", or "how do I fix a dynamic MBR partition that's failing boot"? I've tried to educate myself but can't find crucial information to clear it all up. My existing HDD/SSD setup: DISK 0 ~ 60GB SSD/MBR/basic: (350MB recovery)(60GB windows 8 bootable) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISK 2 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISKS 3, 4, 5: (ignored for simplicity: 2xHDD RAID1 + caching SSD) I'm heavy duty on data crunching and virtualisation, just maxxed out 32GB RAM @ 2133 and moved to 4960X + 64GB. Disk 0 is a pure system disk of little value, and virtualisations runs off mirrored SSDs (Samsung 840 Pro 512 x 2) for double speed reading and so they snapshot in reasonable time. I'm using 4 SATA3 ports and the board only has two decent Intel ports (onboard Marvell are poorer quality). I'm wary of choosing between LSI, HighPoint and other 3rd party controllers as I'm unfamiliar with the maze of decent RAID cards (that's a whole other issue!). I want to cut down my SSD needs by moving the boot volume and caching volume to the 840 pros, giving a setup with 2 fewer SSDs: DISK 0 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB boot)(410GB mirrored data) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(30GB cache for the ICH10R mirror)(30GB temp)(410GB mirrored data) DISKS 2, 3: (2xHDD RAID1) Intel's RST allows this, Win 8 allows booting off a MBR/dynamic disk, and the two 60GB SSDs are hardly the fastest SSDs anyway, they'll get repurposed. Moving the caching volume is easy. Moving the boot volume has me stumped. The difficulty is, I'm hitting a wall of knowledge here. I have a UEFI Asus motherboard with an previous traditional MBR/basic boot disk, and I want it to boot from a disk and volume that's MBR/dynamic. The disk copy is physically ok (Partition Wizard Server will copy to dynamic volumes) but then hits a light blue 0xc000000e boot error. No real surprise, I expected to have some boot fixing, but had expected Windows to boot-fix it (all drivers exist), or the usual manual fixes to work. Specifically, I don't know enough, to know what's got to be manually checked and perhaps corrected for the disk to boot (legacy/uefi/bios, odd partitions, boot tables, disk IDs, hidden boot files, oh my!), or if I need to change any of this secure boot/UEFI/legacy stuff in the bios, convert a 512 SSD to basic and then back to dynamic when working, or if the issue is pure OS config using "diskpart", "bootsect" and "bootrec" from the Win8 DVD. The old system disk still boots but I don't know enough to figure what to fix, to make the system boot as I want. The answers probably aren't hard but the real issue is my confusion and missing information. Thanks for helping!

    Read the article

  • Authenticate by libpam-mysql and libnss-mysql (CentOS)

    - by Chris
    I'm trying to get MySQL to function as a backend for authenticating users on CentOS 6.3. So far I have successfully installed and configured libnss-mysql. I can test this by doing: # groups testuser testuser : sftp Testuser is a member of the sftp group in fact, all MySQL based useraccounts will be hardcoded to it. The sftp group is chrooted and forced to use internal-sftp so they cannot do anything but access their home directory. Then I configured pam-mysql and PAM to allow mysql logins. This also works.. When SELinux is not enforcing. When I do setenforce 1 users can no longer login. Error: Permission denied, please try again. This is my pam_mysql.conf file: users.host=localhost users.db_user=nss-pam-user users.db_passwd=*********** users.database=sftpusers users.table=users users.user_column=username users.password_column=password users.password_crypt=6 verbose=1 My /etc/pam.d/sshd: #%PAM-1.0 auth sufficient pam_sepermit.so auth include password-auth auth required pam_mysql.so config_file=/etc/pam_mysql.conf account sufficient pam_nologin.so account include password-auth account required pam_mysql.so config_file=/etc/pam_mysql.conf password include password-auth # pam_selinux.so close should be the first session rule session required pam_selinux.so close session required pam_loginuid.so # pam_selinux.so open should only be followed by sessions to be executed in the user context session required pam_selinux.so open env_params session optional pam_keyinit.so force revoke session include password-auth And to be complete the contents of some log files.. /var/logs/secure Nov 20 14:52:20 hostname unix_chkpwd[4891]: check pass; user unknown Nov 20 14:52:20 hostname unix_chkpwd[4891]: password check failed for user (testuser) Nov 20 14:52:20 hostname sshd[4880]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=192.168.10.107 user=testuser Nov 20 14:52:22 sftpusers sshd[4880]: Failed password for testuser from 192.168.10.107 port 51849 ssh2 /var/logs/audit/audit.log type=USER_AUTH msg=audit(1353420107.070:812): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=pubkey acct="testuser" exe="/usr/sbin/sshd" hostname=? addr=192.168.10.107 terminal=ssh res=failed' type=USER_AUTH msg=audit(1353420112.312:813): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=PAM:authentication acct="testuser" exe="/usr/sbin/sshd" hostname=192.168.10.107 addr=192.168.10.107 terminal=ssh res=failed' type=USER_AUTH msg=audit(1353420112.456:814): user pid=5285 uid=0 auid=500 ses=24 subj=unconfined_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=password acct="testuser" exe="/usr/sbin/sshd" hostname=? addr=192.168.10.107 terminal=ssh res=failed' I tried to let audit2why explain the problem but it remains silent even though there are some errors. Does anyone see the problem? Thanks! EDIT: Turns out it's almost working with setenforce 0 I can mkdir foobar but if I do a single ls I get an error: Received message too long 16777216

    Read the article

  • Windows cannot find the host name "download.microsoft.com" using DNS

    - by joedotnot
    When trying to download a file found on the Microsoft downloads center that starts with, for example, http://download.microsoft.com/download/6/8/7/(some_GUID)/(some_file_name.ext) i get a timeout with "Internet Explorer cannot display the webpage". More information says: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. Diagnose Connection problems says: Windows cannot find the host name "download.microsoft.com" using DNS Bear with me while i expand on the problem: It all started when i tried to download Windows XP mode for my Windows 7 machine. I went to the virtual PC site, then thru the motions of Windows Genuine Advantage which validated ok, but when it redirects to grab the file just times out with above error. (NB: i also tried with the latest Chrome and Firefox but no use due to the Genuine Advantage stuff, so i decided to stick with IE). I am behind an ADSL2+ modem router connecting via wireless (Win 7 Pro laptop); so i hop over to the desktop connected via ethernet (Vista Business), and same result; begin to think site download.microsoft.com site is down. So i give it a break an read up on EDNS, flushing the cache, hosts file, etc... Try again an hour later on the Win 7 machine, still no go; so i turn off the Win 7 (software) firewall, and lo and behold, i can connect and grab any files from download.microsoft.com; (...nice, so we have a Micro$0ft firewall preventing access to a Micro$0ft website, no wonder my auto-updates kept failing but that's another story). But i still am not happy that the desktop connected via ethernet still cannot get to download.microsoft.com, even though i turned off all firewalls, defenders, anti-virus, etc. What is so special / specific about the url download.microsoft.com, any other site is ok, including www.microsoft.com. Any networking guru know what's REALLY going on, and how can i get the desktop to connect? Ping download.microsoft.com - Ping request could not find host download.microsoft.com. Please check the name and try again. Ping google.com or even www.microsoft.com works gives me an IP address. NB: On the wireless laptop ping download.microsoft.com works, i get xxxx.ms.akamai.net [202.7.177.33].

    Read the article

  • Web application/ site service (like Google App Engine) for PHP/ MySQL and Postgres

    - by Simon
    I would like to find a service similar to Google App Engine for PHP/ MySQL/ Postgres sites/ applications. We host two different types of site. i). PHP/ Mysql/ Zend Framework <VirtualHost *:80> DocumentRoot "/home/websites/website.com/public" ServerName website.com # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory "/home/websites/website.com/public"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order allow,deny Allow from all RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] </Directory> </VirtualHost> ii). Matrix CMS - PHP/ Postgres + loads of pear classes <VirtualHost *:80> ServerName server.example.com DocumentRoot /home/websites/mysource_matrix/core/web Options -Indexes FollowSymLinks <Directory /home/websites/mysource_matrix> Order deny,allow Deny from all </Directory> <DirectoryMatch "^/home/websites/mysource_matrix/(core/(web|lib)|data/public|fudge)"> Order allow,deny Allow from all </DirectoryMatch> <DirectoryMatch "^/home/websites/mysource_matrix/data/public/assets"> php_flag engine off </DirectoryMatch> <FilesMatch "\.inc$"> Order allow,deny Deny from all </FilesMatch> <LocationMatch "/(CVS|\.FFV)/"> Order allow,deny Deny from all </LocationMatch> Alias /__fudge /home/websites/mysource_matrix/fudge Alias /__data /home/websites/mysource_matrix/data/public Alias /__lib /home/websites/mysource_matrix/core/lib Alias / /home/websites/mysource_matrix/core/web/index.php/ </VirtualHost> My key requirements are: I don't want to worry/ know/ care about the server/ infrastructure Secure/ up to date software/ os Good monitoring Automatic scalability SLA I apologise for the length of the question. In short all I want to do is i). create vhost, ii). create db iii). install app/ site iv). relax. Thanks. Edit: I include the Matrix vhost because that is the only complication that I cannot really do via a .htaccess file.

    Read the article

  • Mod_rewrite with UTF-8 accent, multiviews , .htaccess

    - by GuruJR
    Problem: with Mod_rewrite, multiview & Apache config Introduction: The website is in french and i had problem with unicode encoding and mod_rewrite within php wihtout multiviews Old server was not handling utf8 correctly (somewhere between PHP, apache mod rewrite or mysql) Updated Server to Ubuntu 11.04 , the process was destructive lost all files in var/www/ (the site was mainly 2 files index.php & static.php) lost the site specific .Htaccess file lost MySQL dbs lost old apache.conf What i have done so far: What works: Setup GNutls for SSL, Listen 443 = port.conf Created 2 Vhosts in one file for :80 and :443 = website.conf Enforce SSL = Redirecting :80 to :443 with a mod_rewrite redirect Tried to set utf-8 everywhere.. Set charset and collation , db connection , mb_settings , names utf-8 and utf8_unicode_ci, everywhere (php,mysql,apache) to be sure to serve files as UTF-8 i enabled multiview renamed index.php.utf8.fr and static.php.utf8.fr With multiview enabled, Multibytes Accents in URL works SSL TLS 1.0 What dont work: With multiview enabled , mod_rewrite works for only one of my rewriterules With multiview Disabled, i loose access to the document root as "Forbidden" With multiview Disabled, i loose Multibytes (single charater accent) The Apache Default server is full of settings. (what can i safely remove ?) these are my configuration files so far :80 Vhost file (this one work you can use this to force redirect to https) RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} LanguagePriority fr :443 Vhost file (GnuTls is working) DocumentRoot /var/www/x ServerName example.com ServerAlias www.example.com <Directory "/var/www/x"> allow from all Options FollowSymLinks +MultiViews AddLanguage fr .fr AddCharset UTF-8 .utf8 LanguagePriority fr </Directory> GnuTLSEnable on GnuTLSPriorities SECURE:+VERS-TLS1.1:+AES-256-CBC:+RSA:+SHA1:+COMP-NULL GnuTLSCertificateFile /path/to/certificate.crt GnuTLSKeyFile /path/to/certificate.key <Directory "/var/www/x/base"> </Directory> Basic .htaccess file AddDefaultCharset utf-8 Options FollowSymLinks +MultiViews RewriteEngine on RewriteRule ^api/$ /index.php.utf8.fr?v=4 [L,NC,R] RewriteRule ^contrib/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^coop/$ /index.php.utf8.fr?v=3 [L,NC,R] RewriteRule ^crowd/$ /index.php.utf8.fr?v=2 [L,NC,R] RewriteRule ^([^/]*)/([^/]*)$ /static.php.utf8.fr?VALUEONE=$2&VALUETWO=$1 [L] So my quesiton is whats wrong , what do i have missing is there extra settings that i need to kill from the apache default . in order to be sure all parts are using utf-8 at all time, and that my mod_rewrite rules work with accent Thank you all in advance for your help, I will follow this question closely , to add any needed information.

    Read the article

  • PCI-DSS compliance for business with only swipe terminals [migrated]

    - by rowatt
    I support the IT infrastructure for a small retail business which is now required to undergo a PCI-DSS assessment. The payment service and terminal provider (Streamline) has asked that we use Trustwave to do the PCI-DSS certification. The problem I face is that if I answer all questions and follow Trustwave's requirements to the letter, we will have to invest significantly in networking equipment to segment LANs and /or do internal vulnerability scanning, while at the same time Streamline assures me that the terminals we have (Verifone VX670-B and MagIC3 X-8) are secure, don't store any credit card information and are PCI-DSS compliant so by implication we don't need to take any action to ensure their network security. I'm looking for any suggestions as to how we can most easily meet the networking requirements for PCI-DSS. Some background on our current network setup: single wired LAN, also with WiFi turned on (though if this creates any PCI-DSS complexities we can turn it off). single Netgear ADSL router. This is the only firewall we have in place, and the firewall is out the box configuration (i.e. no DMZ, SNMP etc). Passwords have been changed though :-) a few windows PCs and 2 windows based tills, none of which ever see any credit card information at all. two swipe terminals. Until a few months ago (before we were told we had to be PCI-DSS certified) these terminals did auth/capture over the phone. Streamline suggested we moved to their IP Broadband service, which instead uses an SSL encrypted channel over the internet to do auth/capture, so we now use that service. We don't do any ecommerce or receive payments over the internet. All transactions are either cardholder present, or MOTO with details given over phone and typed direct into terminal. We're based in the UK. As I currently understand it we have three options in order to get PCI-DSS certification. segment our network so the POS terminals are isolated from all PCs, and set up internal vulnerability scanning on that network. don't segment the network, and have to do more internal scanning and have more onerous management of PCs than I think we need (for example, though the tills are Windows based, they are fully managed so I have no control over software update policies, anti virus etc). All PCs have anti virus (MSE) and windows updates automatically applied, but we don't have any centralised go back to auth/capture over phone lines. I can't imagine we are the first merchant to be in this situation. I'm looking for any recommendations a simple, cost effective way to be PCI-DSS compliant - either by doing 1 or 2 above with (hopefully) simple and inexpensive equipment/software, or any other ways if there's a better way to do this. Or... should we just go back to the digital stone age and do auth/capture over the phone, which means we don't need to do anything on our network to be PCI-DSS certified?

    Read the article

  • How do i enable innodb on ubuntu server 10.04

    - by Matt
    Here is my entire my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] key_buffer = 224M sort_buffer_size = 4M read_buffer_size = 4M read_rnd_buffer_size = 4M myisam_sort_buffer_size = 12M query_cache_size = 44M # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # #key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M #query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ And here is my show engines call....i have no idea what i need to do to enable innodb show engines; +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | Engine | Support | Comment | Transactions | XA | Savepoints | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | MyISAM | DEFAULT | Default engine as of MySQL 3.23 with great performance | NO | NO | NO | | MRG_MYISAM | YES | Collection of identical MyISAM tables | NO | NO | NO | | BLACKHOLE | YES | /dev/null storage engine (anything you write to it disappears) | NO | NO | NO | | CSV | YES | CSV storage engine | NO | NO | NO | | MEMORY | YES | Hash based, stored in memory, useful for temporary tables | NO | NO | NO | | FEDERATED | NO | Federated MySQL storage engine | NULL | NULL | NULL | | ARCHIVE | YES | Archive storage engine | NO | NO | NO | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ 7 rows in set (0.00 sec)

    Read the article

  • pam_unix(sshd:session) session opened for user NOT ROOT by (uid=0), then closes immediately using using TortiseSVN

    - by codewaggle
    I'm having problems accessing an SVN repository using TortoiseSVN 1.7.8. The SVN repository is on a CentOS 6.3 box and appears to be functioning correctly. # svnadmin --version # svnadmin, version 1.6.11 (r934486) I can access the repository from another CentOS box with this command: svn list svn+ssh://[email protected]/var/svn/joetest But when I attempt to browse the repository using TortiseSVN from a Win 7 workstation I'm unable to do so using the following path: svn+ssh://[email protected]/var/svn/joetest I'm able to login via SSH from the workstation using Putty. The results are the same if I attempt access as root. I've given ownership of the repository to USER:USER and ran chmod 2700 -R /var/svn/. Because I can access the repository via ssh from another Linux box, permissions don't appear to be the problem. When I watch the log file using tail -fn 2000 /var/log/secure, I see the following each time TortiseSVN asks for the password: Sep 26 17:34:31 dev sshd[30361]: Accepted password for USER from xx.xxx.xx.xxx port 59101 ssh2 Sep 26 17:34:31 dev sshd[30361]: pam_unix(sshd:session): session opened for user USER by (uid=0) Sep 26 17:34:31 dev sshd[30361]: pam_unix(sshd:session): session closed for user USER I'm actually able to login, but the session is then closed immediately. It caught my eye that the session is being opened for USER by root (uid=0), which may be correct, but I'll mention it in case it has something to do with the problem. I looked into modifying the svnserve.conf, but as far as I can tell, it's not used when accessing the repository via svn+ssh, a private svnserve instance is created for each log in via this method. From the manual: There's still a third way to invoke svnserve, and that's in “tunnel mode”, with the -t option. This mode assumes that a remote-service program such as RSH or SSH has successfully authenticated a user and is now invoking a private svnserve process as that user. The svnserve program behaves normally (communicating via stdin and stdout), and assumes that the traffic is being automatically redirected over some sort of tunnel back to the client. When svnserve is invoked by a tunnel agent like this, be sure that the authenticated user has full read and write access to the repository database files. (See Servers and Permissions: A Word of Warning.) It's essentially the same as a local user accessing the repository via file:/// URLs. The only non-default settings in sshd_config are: Protocol 2 # to disable Protocol 1 SyslogFacility AUTHPRIV ChallengeResponseAuthentication no GSSAPIAuthentication yes GSSAPICleanupCredentials yes UsePAM yes AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE AcceptEnv XMODIFIERS X11Forwarding no Subsystem sftp /usr/libexec/openssh/sftp-server Any thoughts?

    Read the article

  • UCARP: prevent the original master from taking over the VIP when it comes back after failure?

    - by quanta
    Keepalived can do this by combining the nopreempt option and the BACKUP state on the both nodes: Prevent VRRP Master from becoming Master once it has failed Prevent master to fall back to master after failure How about the UCARP? Name : ucarp Arch : x86_64 Version : 1.5.2 Release : 1.el5.rf Size : 81 k Repo : installed Summary : Common Address Redundancy Protocol (CARP) for Unix URL : http://www.ucarp.org/ License : BSD Description: UCARP allows a couple of hosts to share common virtual IP addresses in order : to provide automatic failover. It is a portable userland implementation of the : secure and patent-free Common Address Redundancy Protocol (CARP, OpenBSD's : alternative to the patents-bloated VRRP). : Strong points of the CARP protocol are: very low overhead, cryptographically : signed messages, interoperability between different operating systems and no : need for any dedicated extra network link between redundant hosts. If I don't use the --preempt option and set the --advskew to the same value, both nodes become master. /etc/sysconfig/carp/vip-010.conf # Virtual IP configuration file for UCARP # The number (from 001 to 255) in the name of the file is the identifier # $Id: vip-001.conf.example 1527 2004-07-09 15:23:54Z dude $ # Set the same password on all mamchines sharing the same virtual IP PASSWORD="pa$$w0rd" # You are required to have an IPADDR= line in the configuration file for # this interface (so no DHCP allowed) BIND_INTERFACE="eth0" # Do *NOT* use a main interface for the virtual IP, use an ethX:Y alias # with the corresponding /etc/sysconfig/network-scripts/ifcfg-ethX:Y file # already configured and ith ONBOOT=no VIP_INTERFACE="eth0:0" # If you have extra options to add, see "ucarp --help" output # (the lower the "-k <val>" the higher priority and "-P" to become master ASAP) OPTIONS="-z -k 255" /etc/sysconfig/network-scripts/ifcfg-eth0:0 DEVICE=eth0:0 ONBOOT=no BOOTPROTO= IPADDR=192.168.6.8 NETMASK=255.255.255.0 USERCTL=yes IPV6INIT=no node 1: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether c6:9b:8e:af:a7:69 brd ff:ff:ff:ff:ff:ff inet 192.168.6.192/24 brd 192.168.6.255 scope global eth0 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth0:0 inet6 fe80::c49b:8eff:feaf:a769/64 scope link valid_lft forever preferred_lft forever node 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:30:48:f7:0f:81 brd ff:ff:ff:ff:ff:ff inet 192.168.6.38/24 brd 192.168.6.255 scope global eth1 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth1:0 inet6 fe80::230:48ff:fef7:f81/64 scope link valid_lft forever preferred_lft forever

    Read the article

  • Monitoring the status of accounts with IT Service providers (ISP, Domain Registrar etc.)

    - by Sholom
    Hi All, Short version: You have software that tells you when your servers power-outlet is down. It monitors multiple servers from one management console, alerts you when something is wrong etc. Does anyone know of software that will let me take the same approach to monitor if the money-outlet (the bill!) is down (not paid) to my IT Services providers (ISP, Domain Registrar, MX Backup service etc). I need a top down, centrally managed service that is capable of sending out alerts. Just like the one that monitors my own exchange server etc. I don't mind if i have to manually enter every payment. Long version: Our very likable but absent minded bookkeeper keeps neglecting to pay our IT vendors on time. Just this past week our internet service was disconnected. Same could happen to many other mission critical accounts (domain registrar, backup MX, anti-virus license, HackerSafe (McAfee secure) service and even an 800 number to name a few). As the sysadmin, i monitor my severs to make sure they are plugged into the power-outlet. I believe i should also monitor my services to make sure they are plugged in to their money-outlet. To compound the problem, when the power goes out someone else will likely notice and notify me. But if a bill is not payed, no one will ever notice until service is lost. Lost as in losing our domain name which would cause a lot more damage then the power failing on our server. [Solution] = [Doesn't work because]: Retrain the bookkeeper = Wishful thinking. Notify my manager = Already have (via email). Protects me, does not solve problem. Fire bookkeeper = What makes you so sure the next one will never forget? Bottom line: Humans are humans and sooner or later something critical will be royally messed up. We need to partner with a machine to help us out here. Anybody have the same problem? What software/solution do you use? I would like software that emails me when a bill is passed due just like i get an email when the power outlet fails. Anyone hear of anything like that? Thanks

    Read the article

  • Add user in CentOS 5

    - by Ron
    I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

    Read the article

  • Firefox can't establish a connection to the server at www.google.com

    - by Tom
    My home page in Firefox [v4.0] and Internet Explorer [v9.0.8112.16421, Update Versions RTM (KB982861)] is currently set to Google but when I depress the quick start icon to start up either browser, I am getting the following immediate results: Unable to connect (In Firefox) Firefox can't establish a connection to the server at www.google.com. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. Internet Explorer cannot display the webpage What you can try: Diagnose Connection Problems More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. There might be a typing error in the address. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For offline users You can still view subscribed feeds and some recently viewed webpages. To view subscribed feeds: Click the Favorites button , click Feeds, and then click the feed you want to view. To view recently visited webpages (might not work on all pages): Press Alt, click File, and then click Work Offline. Click the Favorites button, click History, and then click the page you want to view. Thankfully, I am able to use one browser that I have installed on my computer (Mathon v3.0.20.5000) to search online for technical assistance in this matter. I have seen several WinSock error issues mentioned; but, they are pointing to Windows XP and I am using Windows 7 Pro and remain uncertain whether anything identified as a fix for one OS will work in another. Things I've tried: HiJackThis Complete scan with Avira AntiVirus Premium. What am I overlooking? What should I do to address this problem?

    Read the article

  • Add user in CentOS 5

    - by Ron
    I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

    Read the article

  • Windows 2008 R2 IPsec encryption in tunnel mode, hosts in same subnet

    - by fission
    In Windows there appear to be two ways to set up IPsec: The IP Security Policy Management MMC snap-in (part of secpol.msc, introduced in Windows 2000). The Windows Firewall with Advanced Security MMC snap-in (wf.msc, introduced in Windows 2008/Vista). My question concerns #2 – I already figured out what I need to know for #1. (But I want to use the ‘new’ snap-in for its improved encryption capabilities.) I have two Windows Server 2008 R2 computers in the same domain (domain members), on the same subnet: server2 172.16.11.20 server3 172.16.11.30 My goal is to encrypt all communication between these two machines using IPsec in tunnel mode, so that the protocol stack is: IP ESP IP …etc. First, on each computer, I created a Connection Security Rule: Endpoint 1: (local IP address), eg 172.16.11.20 for server2 Endpoint 2: (remote IP address), eg 172.16.11.30 Protocol: Any Authentication: Require inbound and outbound, Computer (Kerberos V5) IPsec tunnel: Exempt IPsec protected connections Local tunnel endpoint: Any Remote tunnel endpoint: (remote IP address), eg 172.16.11.30 At this point, I can ping each machine, and Wireshark shows me the protocol stack; however, nothing is encrypted (which is expected at this point). I know that it's unencrypted because Wireshark can decode it (using the setting Attempt to detect/decode NULL encrypted ESP payloads) and the Monitor Security Associations Quick Mode display shows ESP Encryption: None. Then on each server, I created Inbound and Outbound Rules: Protocol: Any Local IP addresses: (local IP address), eg 172.16.11.20 Remote IP addresses: (remote IP address), eg 172.16.11.30 Action: Allow the connection if it is secure Require the connections to be encrypted The problem: Though I create the Inbound and Outbound Rules on each server to enable encryption, the data is still going over the wire (wrapped in ESP) with NULL encryption. (You can see this in Wireshark.) When the arrives at the receiving end, it's rejected (presumably because it's unencrypted). [And, disabling the Inbound rule on the receiving end causes it to lock up and/or bluescreen – fun!] The Windows Firewall log says, eg: 2014-05-30 22:26:28 DROP ICMP 172.16.11.20 172.16.11.30 - - 60 - - - - 8 0 - RECEIVE I've tried varying a few things: In the Rules, setting the local IP address to Any Toggling the Exempt IPsec protected connections setting Disabling rules (eg disabling one or both sets of Inbound or Outbound rules) Changing the protocol (eg to just TCP) But realistically there aren't that many knobs to turn. Does anyone have any ideas? Has anyone tried to set up tunnel mode between two hosts using Windows Firewall? I've successfully got it set up in transport mode (ie no tunnel) using exactly the same set of rules, so I'm a bit surprised that it didn't Just Work™ with the tunnel added.

    Read the article

  • Problems set-up Single Sign-On using Kerberos authentication

    - by user1124133
    I need for Ruby on Rail application set authentication via Active Directory using Kerberos authentication. Some technical information: I are using Apache installed mod_auth_kerb In httpd.conf I added LoadModule auth_kerb_module modules/mod_auth_kerb.so In /etc/krb5.conf I added following configuration [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = EU.ORG.COM dns_lookup_realm = false dns_lookup_kdc = false ticket_lifetime = 24h forwardable = yes [realms] EU.ORG.COM = { kdc = eudc05.eu.org.com:88 admin_server = eudc05.eu.org.com:749 default_domain = eu.org.com } [domain_realm] .eu.org.com = EU.ORG.COM eu.org.com = EU.ORG.COM [appdefaults] pam = { debug = true ticket_lifetime = 36000 renew_lifetime = 36000 forwardable = true krb4_convert = false } When I test kinit validuser and enter password then authentication is successful. klist returns: Ticket cache: FILE:/tmp/krb5cc_600 Default principal: [email protected] Valid starting Expires Service principal 02/08/13 13:46:40 02/08/13 23:46:47 krbtgt/[email protected] renew until 02/09/13 13:46:40 Kerberos 4 ticket cache: /tmp/tkt600 klist: You have no tickets cached In application Apache configuration I added IfModule mod_auth_kerb.c> Location /winlogin> AuthType Kerberos AuthName "Kerberos Loginsss" KrbMethodNegotiate off KrbAuthoritative on KrbVerifyKDC off KrbAuthRealms EU.ORG.COM Krb5Keytab /home/crmdata/httpd/apache.keytab KrbSaveCredentials off Require valid-user </Location> </IfModule> I restarted apache Now some tests: When I try to access application from Win7, I got pop-up message box, with text: Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentification without a secure connection) When I enter valid credentials then my application opens successfully, and all works fine. Questions: Is ok that for user pop-ups such windows? If I use NTLM authentication then there no such pop-up. I checked IE Internet Options and there 'Enable Integrated Windows Authentication' is checked. Why IE try to send username and password to application apache? If I correct to understand then Windows self must make authentication via Active Directory using Kerberos protocol. When I try to access application from Win7 and I enter incorrect credentials to pop-up message box Application say Authentication failed (this is OK) In apache error log I see: [error] [client 192.168.56.1] krb5_get_init_creds_password() failed: Client not found in Kerberos database But now I cannot get possibility to enter valid credentials, only when I restart IE I can get again pop-up box. What could be incorrect or missing in my Kerberos setup? I read in some blog post that probably something is needed to be done in Active Directory side. What exactly?

    Read the article

  • Got Hacked. Want to understand how.

    - by gaoshan88
    Someone has, for the second time, appended a chunk of javascript to a site I help run. This javascript hijacks Google adsense, inserting their own account number, and sticking ads all over. The code is always appended, always in one specific directory (one used by a third party ad program), affects a number of files in a number of directories inside this one ad dir (20 or so) and is inserted at roughly the same overnight time. The adsense account belongs to a Chinese website (located in a town not an hour from where I will be in China next month. Maybe I should go bust heads... kidding, sort of), btw... here is the info on the site: http://serversiders.com/fhr.com.cn So, how could they append text to these files? Is it related to the permissions set on the files (ranging from 755 to 644)? To the webserver user (it's on MediaTemple so it should be secure, yes?)? I mean, if you have a file that has permissions set to 777 I still can't just add code to it at will... how might they be doing this? Here is a sample of the actual code for your viewing pleasure (and as you can see... not much to it. The real trick is how they got it in there): <script type="text/javascript"><!-- google_ad_client = "pub-5465156513898836"; /* 728x90_as */ google_ad_slot = "4840387765"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> </script> Since a number of folks have mentioned it, here is what I have checked (and by checked I mean I looked around the time the files were modified for any weirdness and I grepped the files for POST statements and directory traversals: access_log (nothing around the time except normal (i.e. excessive) msn bot traffic) error_log (nothing but the usual file does not exist errors for innocuous looking files) ssl_log (nothing but the usual) messages_log (no FTP access in here except for me)

    Read the article

  • how do i install intermediate certificate

    - by getmizanur
    I have installed private key (pem encoded) and public key certificate (pem encoded) on amazon load balancer however when i check the ssl with site test tool (http://www.networking4all.com/en/support/tools/site+check/), i get the following error Error while checking the SSL Certificate!! Unable to get the local issuer of the certificate. The issuer of a locally looked up certificate could not be found. Normally this indicates that not all intermediate certificates are installed on the server. i converted crt file to pem using these command from this tutorial openssl x509 -in input.crt -out input.der -outform DER openssl x509 -in input.der -inform DER -out output.pem -outform PEM during setting up of amazon load balancer only option i left out was certificate chain (pem encoded) however this was optional. could this be cause of my issue? and if so i how do i create certificate chain? for the last question i have tried googling however i'm getting more confused than before. please help many thanks in advance. UPDATE @all thanks for the helpful advice. if you make request to verisign they will give you a certificate chain however this chain includes public crt, intermediate crt and root crt. make sure to remove the public crt from your certificate chain (which is the top most certificate) before adding it to your certification chain box of your amazon load balancer. if you are making https request from an android app then above instruction may not work for older android os such as 2.1 and 2.2. to make it work on older android os [https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR657&actp=LIST&viewlocale=en_US]. on this link click on "retail ssl" tab and then click on "secure site" "CA Bundle for Apache Server". copy and past these intermediate certs into certificate chain box. just incase if you have not found it here is the direct link [https://knowledge.verisign.com/support/ssl-certificates-support/index?page=content&id=AR1409] if you are using geo trust certificates then solution is much the same for android devices however you need to copy and past their intermediate certs for android. PS: sorry for the long urls however "new users can only post a maximum of two hyperlinks"

    Read the article

  • how to setup kismet.conf on Ubuntu

    - by Registered User
    I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine. but when I launch it I see following error kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. I followed this guide http://www.ubuntugeek.com/kismet-an-802-11-wireless-network-detector-sniffer-and-intrusion-detection-system.html#more-1776 how ever in kismet.conf I am not clear with following line source=none,none,addme as to what should I change this to. lspci -vnn shows 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000c] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f69fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, ssb and iwconfig shows lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"WIKUCD" Mode:Managed Frequency:2.462 GHz Access Point: <00:43:92:21:H5:09> Bit Rate=11 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received Link Quality=1/5 Signal level=-81 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:169 Invalid misc:0 Missed beacon:0 So what should I be putting in place of source=none,none,addme with output I mentioned above ?

    Read the article

  • DNS Issue Windows 2003 AD-The server holding the PDC role is down

    - by Dave M
    Our network of Windows 2003 and Windows 2008 servers suddenly hasDNS issues. There are 7 DCs. Two at our main office and one each at branch sites (one branch has two a 2008R2 and WIN2K3) Only two are WIN2008R2 Running DCDIAG on the WIN2K3 at main site (DC1) reports no issues. Running at any branch site reports two issues All other test pass. The server DC1 can be PINGed by name from any site Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. Starting test: FsmoCheck Warning: DcGetDcName(PDC_REQUIRED) call failed, error 1355 A Primary Domain Controller could not be located. The server holding the PDC role is down. Netdom.exe /query DC reports the expected servers. netdom query fsmo This reports the server at the main office holds the following roles: * Schema owner Domain role owner PDC role RID pool manager Infrastructure owner In the DNS management snap-in, DC1 appears as DNS server but does not appear in _msdcs-dc-_sites-Default-First-Site-Name-_TCP There is no _ldap or –kerberos record pointing to DC1 Same issue msdcs-dc-_sites- -_TCP Again there is no _ldap or –kerberos record pointing to DC1 Under Domain DNS Zones there is no entry for the server. This is the case for any _tcp folder in the DNS. The server DC1 appears correctly as a name server in the Reverse Lookup Zone. There is a Host(A) record for DC1 but in the Forward Lookup Zone there is no (same as parent folder) Host(A) for the DC1 server but such an entry exists for the other DCs at branch sites and the other DC at the main office. We have tried stopping and starting the netlogon service, restarting DNS and also dcdiag /fix. Netdiag reports error: Trust relationship test. . . . . . : Failed [FATAL] Secure channel to domain 'XXX' is broken. [ERROR_NO_LOGON_SERVERS] [WARNING] Failed to query SPN registration on DC- One entry for each branch DC All braches lsit the problem server and it can be Pinged by name from any branch Fixing is number one priority but also would like to determine the casue.

    Read the article

  • Email client wont connect to SMTP Authentication server

    - by Jason
    Im having trouble installing SMTH Auth for my ubuntu email server. I have followed ubuntu own guide for SMTH AUT (https://help.ubuntu.com/14.04/serverguide/postfix.html). But my email client thunderbird is giving this error " lost connection to SMTP-client 127.0.0.1." I cant add new users to thundbird either because of this connection problem. Do i have to alter any setting on my Thunderbird perhaps since ? I did try to make thunderbird use SSL for imap as well but that neither works. I restarted postfix and dovecot to find errors but both run just fine. Prior to SMTP auth changes thunderbird could connect just fine to my server and send mails. This is my main.cf file in postfix. It looks just like the one on ubuntu guide above. readme_directory = no # TLS parameters #smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache myhostname = mail.mysite.com mydomain = mysite.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = $mydomain mydestination = mysite.com #relayhost = smtp.192.168.10.1.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 192.168.10.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all home_mailbox = Maildir/ mailbox_command = #SMTP AUTH smtpd_sasl_type = dovecot smtpd_recipient_restrictions=permit_mynetworks, permit_sasl_authenticated,reject_unauth_destination smtpd_sasl_local_domain = smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_tls_auth_only = no smtp_tls_security_level = may smtpd_tls_security_level = may smtp_tls_note_starttls_offer = yes smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes This my dovecot configuration at 10-master.conf service imap-login { inet_listener imap { #port = 143 } inet_listener imaps { #port = 993 #ssl = yes } # Number of connections to handle before starting a new process. Typically # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0 # is faster. <doc/wiki/LoginProcess.txt> #service_count = 1 # Number of processes to always keep waiting for more connections. #process_min_avail = 0 # If you set service_count=0, you probably need to grow this. #vsz_limit = $default_vsz_limit } service pop3-login { inet_listener pop3 { #port = 110 } inet_listener pop3s { #port = 995 #ssl = yes } } service lmtp { unix_listener lmtp { #mode = 0666 } # Create inet listener only if you can't use the above UNIX socket #inet_listener lmtp { # Avoid making LMTP visible for the entire internet #address = #port = #} } service imap { # Most of the memory goes to mmap()ing files. You may need to increase this # limit if you have huge mailboxes. #vsz_limit = $default_vsz_limit # Max. number of IMAP processes (connections) #process_limit = 1024 } service pop3 { # Max. number of POP3 processes (connections) #process_limit = 1024 } service auth { unix_listener auth-userdb { #mode = 0600 #user = #group = } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix } } service dict { # If dict proxy is used, mail processes should have access to its socket. # For example: mode=0660, group=vmail and global mail_access_groups=vmail unix_listener dict { #mode = 0600 #user = #group = } } I did add auth_mechanisms = plain login to 10-auth.conf as well.

    Read the article

  • Managing hosts and iptables in scalable architecture

    - by hakunin
    Let's say I have a load balancer in front of 3 app servers. Let's say I also have these services available at certain IPs: Postgres server Redis server ElasticSearch server Memcached server 1 Memcached server 2 Memcached server 3 So that's 6 nodes at 6 different IP addresses. Naturally, every one of my 3 app servers needs to talk to these 6 servers above. Then, to make it a bit funkier, I also have 3 worker servers. And each worker also talks to the above 6 servers, but thankfully workers and apps never need to talk to each other. Now's the kicker. Everything is on Digital Ocean VPS. What that means is: you have no private network, no private IPs. You only have separate, random IP address on each machine. You can't mask them or anything. So in order to build a secure environment I would have to configure some iptables. For example: Open app servers be accessed by load balancer server Open redis, ES, PG, and each memcached servers to be accessed by each app's IP and each worker's IP This means that every time I add an app or worker I have to also reconfigure iptables in those above 6 servers to welcome the new app or worker. Is there a way to simplify this type of setup? I was thinking — what if there was a gateway machine between apps/workers and the above 6 machines. This way all the interaction would always happen via the gateway server, and when I add a new app or worker I wouldn't need to teach the 6 servers to let it in. If I went this route, then I'd hope a small 512mb server could handle that perhaps, and there wouldn't be almost any overhead. Or would there? Please help with best way to handle this situation. I would appreciate an answer as concrete as possible. I don't think this is too specific, because this general architecture is very common, and Digital Ocean is becoming increasingly popular. A concrete solution here would be much appreciated by many.

    Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >