Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 134/1036 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• DELL Inspiron 9400 SD Card Reader not working on 10.11 ubuntu

  - by Mario Martz

  Im new in linux, just installed Ubuntu 11.10 in a Dell Inspiron 9400, everything works fine with the exception of the SD card reader, everytime I insert a card the computer doesnt do anything, its like the SD card reader is not there. I did a $lspci and it shows the next drivers 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Everytime I insert a memory card, dmesg shows the next d status 0x600b00 [ 2687.227351] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.229436] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.229440] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.230512] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.230515] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.231588] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.231592] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.232674] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.232678] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.234763] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.234766] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.236864] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.236868] end_request: I/O error, dev mmcblk0, sector 70 [ 2687.238942] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.238946] end_request: I/O error, dev mmcblk0, sector 71 [ 2687.238949] Buffer I/O error on device mmcblk0, logical block 8 [ 2687.241028] mmcblk0: retrying using single block read [ 2687.243104] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.243108] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.245212] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.245215] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.247298] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.247302] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.248389] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.248393] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.250476] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.250480] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.252617] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.252621] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.254737] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 and more of the same but with different sector number Im using Kernel 3.0.0-12-generic By the way, when I was installing it and ubuntu asks about installation (If I want to install it along with windows or delete something or change the partitions of the HDD) if I go to the window to change the partition of the disc, linux detects the SD Card (if there's one inserted course). Any help with this it would be appreciated -sorry for my english Thank you

  Read the article

• Keyring Password, Unity in 11.10

  - by Collin Owens

  Login to 11.10 I input my password and shortly afterward I am asked for a keyring password. I realize that I was asked for this during installation (second time lucky!) and I did enter a password (what a mistaka to maka). This now entails my having to input the keyring password on every boot up! Looking at previous answers it would seem that the applications - accesories - password and encryption keys - was the suggested route. However I assume that was in Gnome (At this stage I look back in fondness!!!) Certainly, I don't get the same route in Unity! I saw a reference to seahorse in a terminal - but this results in several error reports and a sub windows which does not seem to open. The objective in this exercise is to log in using the login password and not also the keyring password! any help would be appreciated - thank you

  Read the article

• Remastersys problem with Ubuntu 12.04

  - by Vimal Kumar

  I successfully installed remastersys latest version for precise in Ubuntu 12.04 and created iso by executing backupmode. When installation in final stages I got the following error, "The username you entered is invalid. Note that usernames must start with a lowercase letter, which can be followed by any combination of numbers and more lower case letters." After it quit the installation. Can you help me to solve this problem? Regrads

  Read the article

• Network is not working anymore - Ubuntu 12.04

  - by Jonathan

  Network is not working anymore - Ubuntu 12.04 Hello, I have a problem with my network connection. I have been using the same laptop with Ubuntu and the same connection for more than a year, and suddenly yesterday the connection stopped working (both wireless and wired). I've tested with another computer and the connection is fine (both wireless and wired). I've been reading similar posts but I haven't found a solution yet. I tried a few commands that I'm posting here (my system is in spanish, so I have traslated it to english, maybe the terms are not accurate): grep -i eth /var/log/syslog | tail Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): now managed Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): device state change: unmanaged - unavailable (reason 'managed') [10 20 2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): bringing up device. Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): preparing device. Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845743] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845984] forcedeth 0000:00:0a.0: eth0: no link during initialization Jun 3 18:45:40 vanesa-pc kernel: [ 7351.847103] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): deactivating device (reason 'managed') [2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0 Jun 3 18:45:40 vanesa-pc kernel: [ 7351.848817] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig -a eth0 Link encap:Ethernet addressHW 00:1b:24:fc:a8:d1 ACTIVE BROADCAST MULTICAST MTU:1500 Metric:1 Packages RX:0 errors:16 lost:0 overruns:0 frame:16 Packages TX:123 errors:0 lost:0 overruns:0 carrier:0 colissions:0 length.tailTX:1000 Bytes RX:0 (0.0 B) TX bytes:26335 (26.3 KB) Interruption:41 Base address: 0x2000 lo Link encap:Local loop Inet address:127.0.0.1 Mask:255.0.0.0 Inet6 address: ::1/128 Scope:Host ACTIVE LOOP WORKING MTU:16436 Metrics:1 Packages RX:1550 errors:0 lost:0 overruns:0 frame:0 Packages TX:1550 errors:0 lost:0 overruns:0 carrier:0 colissions:0 long.tailTX:0 Bytes RX:125312 (125.3 KB) TX bytes:125312 (125.3 KB) iwconfig lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network *-network description: Ethernet interface product: MCP67 Ethernet manufacturer: NVIDIA Corporation Physical id: a bus information: pci@0000:00:0a.0 logical name: eth0 version: a2 series: 00:1b:24:fc:a8:d1 capacity: 100Mbit/s width: 32 bits clock: 66MHz capacities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII resources: irq:41 memoria:f6288000-f6288fff ioport:30f8(size=8) memoria:f6289c00-f6289cff memoria:f6289800-f628980f lsmod Module Size Used by usbhid 41906 0 hid 77367 1 usbhid rfcomm 38139 0 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi nouveau 708198 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197692 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau psmouse 87213 0 mxm_wmi 12859 1 nouveau serio_raw 13027 0 k8temp 12905 0 i2c_nforce2 12906 0 wmi 18744 2 hp_wmi,mxm_wmi video 19068 1 nouveau mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp forcedeth 58096 0 Let me know if I can give you more information. Thank you very much in advance, Jonathan

  Read the article

• Unity GUI pauses/freezes for less than a few seconds

  - by Ahmad Nassri

  I've just got my new Lenovo ThinkPad X220 with Intel HD graphics (I'm not sure what the chip is) and I've installed Natty. Everything works great out of the box, except there are short pauses/freezes in the UI that randomly occur, they last less than 2 seconds, actions are still taking place in the background (like typing) when the UI un-freezes I can see the characters I've typed, the app I've clicked, loaded . I can confirm that this is only happening with the new Natty 3D interface, I've tried 2D and the classic interface and there were no issues. Googling this topic seems challenging as I can't relate the problem in keywords. And I keep getting results relating to full GUI freeze which I don't have. This is troubling since I have Natty 3D running on older machines without any issues . I wonder if anybody else have experienced this or came across this issue before. Thanks.

  Read the article

• Bug in firefox address bar autocomplete running on KDE

  - by marcus

  Has anyone experienced this graphical glitch when typing in Firefox address bar? The drop-down list is not drawn correctly, with some "blocks" missing. After typing more letters or hovering the mouse cursor, the list redraws itself and becomes complete. I'm running Ubuntu 12.04, Firefox 13.0.1 and this only happens in KDE (tested with 4.8.2, 4.8.3 and 4.8.4). It does not happen in Unity or Xfce with the same user profile. If I go to the KDE control panel and disable the Fade effect, the bug starts to happen to almost every menu in the system, including, the taskbar window previews. Enabling the “Fade” effect corrects the bug everywhere except in Firefox. I have an Nvidia card and I am using the proprietary driver (current, not current-updates -- not sure about the difference), but the linked question on an Arch Linux forum says this happen with the open source driver and with other cards too. Does anyone have an idea for a solution?

  Read the article

• Package System Broken AMD FGLRX Unmet Dependencies

  - by fleamour

  I uninstalled propriety ATI driver to check if it would fix wrong Plymouth resolution. It did. But now I cannot reinstall either propriety drivers listed. Also package system has broken with this error: The package system is broken If you are using third party repositories then disable them, since they are a common source of problems. Now run the following command in a terminal: apt-get install -f The following packages have unmet dependencies: fglrx-amdcccle: Depends: fglrx but it is not installed Depends: libqtcore4 (= 4:4.5.3) but 4:4.8.1-0ubuntu4.1 is installed Depends: libqtgui4 (= 4:4.5.3) but 4:4.8.1-0ubuntu4.1 is installed What should I do?

  Read the article

• Intel TurboBoost not working under 12.04 LTS

  - by Panák Tibor

  Please help me someone :) My notebook has Intel core i5 3337U CPU with Intel turbo boost. Under 12.04 the turbo boost is not working properly. It's frequency maximum is 1.8Ghz but the CPU can run 2.7GHz. How can I fix it? pano@dell-inspiron:~$ grep MHz /proc/cpuinfo cpu MHz : 774.000 cpu MHz : 1801.000 cpu MHz : 774.000 cpu MHz : 1801.000 pano@dell-inspiron:~$ grep MHz /proc/cpuinfo cpu MHz : 774.000 cpu MHz : 1801.000 cpu MHz : 774.000 cpu MHz : 1801.000 pano@dell-inspiron:~$ grep MHz /proc/cpuinfo cpu MHz : 774.000 cpu MHz : 1801.000 cpu MHz : 1800.000 cpu MHz : 1801.000 pano@dell-inspiron:~$ grep MHz /proc/cpuinfo cpu MHz : 774.000 cpu MHz : 1801.000 cpu MHz : 774.000 cpu MHz : 1700.000

  Read the article

• Sword and Sworcery - seg fault

  - by Synesso

  I've just bought, installed Sword and Sworcery via the Software Centre. When I run it, the screen goes black, the cursor changes and then all reverts back to normal. I found the executable that matches the menu item. /bin/sh /opt/swordandsworcery/run.sh When I run it from the console: Segmentation fault (core dumped) My setup: Linux jem-doxie 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux Where to from here? Refund? Or can I do something?

  Read the article

• WiFi not working on Dell Inspiron 1564

  - by Zack Warren

  hope you can offer some help! I'm new to Ubuntu (and Linux for that matter), but I managed to install Ubuntu 12.04 yesterday on an old Dell Inspiron 1564 Laptop. Everything works fine, with the exception of the wireless connection. Using my wired ethernet, I was able to look up several solutions which seemed as if they would work, but I've had no luck. Currently, wireless does show as enabled, but all wireless networks are disconnected, in fact, none of the networks are even listed (and I can see them on other devices in the home). Let me know what you need to help me! Thanks in advance!

  Read the article

• Starting a guest session from the login screen

  - by Odd-rationale

  I was wondering what is the best way to start the guest session from the login screen (GDM). Currently, I created a new user called 'ubuntu-guest' (has to be something other than 'guest'). Then added the following script to the Startup Applications. #!/bin/bash /usr/share/gdm/guest-session/guest-session-launch & /usr/bin/gnome-session-save --logout The problem with this method, is that when you log in as 'ubuntu-guest', you have to start up two gnome sessions: one for 'ubuntu-guest' and one for the actual guest account. Please let me know if you have any other better ideas. Thanks!

  Read the article

• sensors reporting weird temperatures

  - by Felix

  lm-sensors is reporting weird temps for me: $ sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +38.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +35.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +32.0°C (high = +72.0°C, crit = +100.0°C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +42.0°C (high = +72.0°C, crit = +100.0°C) w83627dhg-isa-0290 Adapter: ISA adapter Vcore: +1.10 V (min = +0.00 V, max = +1.74 V) in1: +1.62 V (min = +0.06 V, max = +0.17 V) ALARM AVCC: +3.34 V (min = +2.98 V, max = +3.63 V) VCC: +3.34 V (min = +2.98 V, max = +3.63 V) in4: +1.83 V (min = +1.30 V, max = +1.15 V) ALARM in5: +1.26 V (min = +0.83 V, max = +1.03 V) ALARM in6: +0.11 V (min = +1.22 V, max = +0.56 V) ALARM 3VSB: +3.30 V (min = +2.98 V, max = +3.63 V) Vbat: +3.18 V (min = +2.70 V, max = +3.30 V) fan1: 0 RPM (min = 0 RPM, div = 128) ALARM fan2: 1117 RPM (min = 860 RPM, div = 8) fan3: 0 RPM (min = 10546 RPM, div = 128) ALARM fan4: 0 RPM (min = 10546 RPM, div = 128) ALARM fan5: 0 RPM (min = 10546 RPM, div = 128) ALARM temp1: +88.0°C (high = +20.0°C, hyst = +4.0°C) ALARM sensor = diode temp2: +25.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +121.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor cpu0_vid: +2.050 V Please note temp3. How can I know what temp3 is, and why it is so high? The system is really stable (which I guess it wouldn't be at those temps). Also, note the really decent core temps, which suggest a healthy system as well. My guess is that the readout is wrong. On another computer it reported temperatures below 0 degrees centigrade, which was not possible, considering the environment temperature of ~22-24. Is this some known bug/issue? Should I try some Windows programs (like CPU-Z) and see they give similar results?

  Read the article

• Application to display battery info

  - by Nik

  First of all, I am not sure the title of this question is the most appropriate however this is what I meant to say, There are many ways to extend the life of a laptop battery. One way is by not connecting it to the AC adapter all the time which will overcharge it. I read that in this website. Is there an application which automatically prevents the charging of the battery once it has reached 80% charged? I mean that is such a cool feature. Sometimes people tend to forget to remove the AC adapter and this could diminish the capacity and reduce the life time of the battery. Does the battery indicator in ubuntu display info or pop-up when the battery is almost dead (dead not in the sense of usage time) but rather a degraded battery?

  Read the article

• How to pause/resume transfer of large files?

  - by Olivier Lalonde

  I recently had to copy about 20 GB of data split between about 20 files from my laptop to an external hard drive. Since this operation takes quite a while (at ~560kb/s), I was wondering if there was any way to pause the transfer and resume it later (in case, I need to interrupt the transfer). As a side question, is there any performance difference between copying from the terminal vs copying from Nautilus?

  Read the article

• ibus symbol disappears for Japanese language selection

  - by Christian Becker-Asano

  Similar to this post No ibus icon in Kubuntu, I have trouble with the ibus icon in Ubuntu 12.04. Each time an update is installed, the language selector for Japanese disappears from the top panel. I need to uninstall and install Japanese again, then reboot, to make the symbol appear again. In this thread No iBus icon in Kubuntu 12.04 the suggestion was to install the Japanese Version of Ubuntu, but is it really true that one has to stick to a special version of Ubuntu to get this problem solved? If so, how can I transfer the settings easily from the current version to the Japanese one?

  Read the article

• Mount Ubuntu shares remotely with Mac and Windows

  - by Donald

  First time on here so please be gentle! I have setup a small school network with a Ubuntu 12.04 Server for use as a fileserver mainly. I have managed to set the server up (all command line based - no GUI) and setup the Samba shares, which works really well internally. Internally, the school have a combination of Mac's and Windows machines and they can all access the shares happily. The school has a fixed IP ADSL connection and I have added a route in the router to allow me remote access to the server using SSH (port 22). That also works well. All good so far! What I now want to do is allow remote access to the shares. I have done a bit of reading and thought I had found the answer with SSHFS but I am still non-the-wiser. So, my basic questions is: In Windows, how can I map to the Ubuntu shares across the internet through the router? In Mac OS, how can I add the remote share across the internet? The school used to have a Windows server and the users were used to creating a VPN and then pulling up the share folders etc, but I'm unsure how to do this with the Ubuntu server. I assume I need to add another route through the router too allow for SSHFS or something similar? Thanks in advance... Donald

  Read the article

• How to completely remove ldap and remove the directory tree

  - by rugbert

  so I followed this guide: https://help.ubuntu.com/11.04/serverguide/C/openldap-server.html to install and configure ldap but then I discoverd both phpLDAPadmin and Luma and have decided to rebuild my tree from scratch using one of those tools. However Im not sure how to completely remove LDAP now. I can remove it using apt-get, but if I attempt to reinstall it and login using phpLDAPadmin it seems that it's still looking for older authentication and gives me a credential error

  Read the article

• Problem with Python3 picking Python2 package

  - by zetah

  I installed python3-numpy package, but trying to import it in Python3 interpreter I get this: $ python3 Python 3.2.3 (default, May 3 2012, 15:54:42) [GCC 4.6.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import numpy Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/home/zetah/.local/lib/python2.7/site-packages/numpy/__init__.py", line 128, in <module> from version import git_revision as __git_revision__ ImportError: No module named version >>> Looking in Synaptic I see python3-numpy is installed in /usr/lib/python3/dist-packages/numpy/ Why is it picking wrong package and what can I do to remedy this? Update: OK, in my ~/.profile I have this line: PYTHONPATH=$PYTHONPATH:$HOME/.local/lib/python2.7/site-packages but if I remove this line then my Python 2.7 local packages (which I build from source) wont work Update 2: Everything seems to work perfect without $PYTHONPATH. I guess it was in my .profile file for nothing Please close this question

  Read the article

• Ubuntu Extras keyring error

  - by Pawan Neupane

  Recently I got lots of GPG errors and tried the following methods at various stages: sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3E5C1192 sudo apt-get install -reinstall ubuntu-extras-keyring (For Ubuntu Extras only) gpg –keyserver keyserver.ubuntu.com –recv 3E5C1192 gpg –export –armor 3E5C1192 | sudo apt-key add - sudo apt-get update sudo aptitude -o Acquire::http::No-Cache=True -o Acquire::BrokenProxy=true update sudo -i apt-get clean cd /var/lib/apt mv lists lists.old mkdir -p lists/partial apt-get clean apt-get update I again got BADSIG error for extras.ubuntu.com today. So, I'm really at a loss what's causing this error to occur time and again. I really want to solve this problem once and for all.

  Read the article

• How to escape this in the bash script?

  - by allenskd

  I'm trying to complete a batch of 3 videos to leave it there till morning processing but it seems there are special characters in it... I try it "raw" in the terminal and it works but in bash script it stops working Example: args1="-r 29.97 -t 00:13:30 -vsync 0 -vpre libx264-medium -i" args12="-r 29.97 -ss 00:40:30 -vsync 0 -vpre libx264-medium -i" args2="[in] scale=580:380 [T1],[T1] pad=720:530:0:50 (other arguments with lots of [ and ]" In the output it says Unable to find a suitable output format for 'scale=580:380' not sure why... like I said, the command runs fine in the command-line, just not in the script /usr/local/bin/ffmpeg "$args1" "${file}" -vf "$args2" "$args3" "${args[0]}_${startingfrom}_0001_02.mp4"

  Read the article

• how do i run teamviewer in a headless system?

  - by Serge

  im really new to ubuntu 12.04 and ive been trying to get remote desktop services between me and my server. and i dont have any spare monitors, keyboards, or mice. i did connect said items too the server and got teamviewer running and connected. but i cant use those components every time i want to go remote desktop. i have ssh but i want a GUI on hand for annoying stressful situations. i read somewhere that ubuntu doesnt start a gui if there is no monitor connected. and tried those xorg.conf setups to no avail. i believe this is the reason why my headlesds setup isnt working. how can i get my GUI to startup while headless?

  Read the article

• Black screen and blinking cursor for a while during Startup

  - by Soumyadip Mukherjee

  I've installed the Ubuntu 12.04.1 "rock solid" release. Everything works fine apart from the fact that during start-up the usual purple screen and Ubuntu logo doesn't appear. Only a black screen and blinking cursor is visible. Then after a while, for a fraction of a second, the Ubuntu logo and purple screen comes and disappears to the login page. I tried Plymouth but it didn't help in solving the problem. It did end up changing the logo to a more artistic one. Can any one please help? Ubuntu is installed on my ASUS 1225c netbook.

  Read the article

• Ubuntu Server 12 not spawning a serial ttyS0 when running on Xen

  - by segfaultreloaded

  I have this problem on more than one host, so the specific hardware is not an issue. Bare metal Ubuntu 12 is not creating a login process on the only serial port, in the default configuration. The serial port works correctly with the firmware. It works correctly with Grub2. I have even connected the serial line to 2 different external client boxes, so the problem is neither the hardware nor the remote client. When finally booted, the system fails to create the login process. root@xenpro3:~# ps ax | grep tty 1229 tty4 Ss+ 0:00 /sbin/getty -8 38400 tty4 1233 tty5 Ss+ 0:00 /sbin/getty -8 38400 tty5 1239 tty2 Ss+ 0:00 /sbin/getty -8 38400 tty2 1241 tty3 Ss+ 0:00 /sbin/getty -8 38400 tty3 1245 tty6 Ss+ 0:00 /sbin/getty -8 38400 tty6 1403 tty1 Ss+ 0:00 /sbin/getty -8 38400 tty1 1996 pts/0 S+ 0:00 grep --color=auto tty root@xenpro3:~# dmesg | grep tty [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-30-generic root=/dev/mapper/xenpro3-root ro console=ttyS0,115200n8 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-30-generic root=/dev/mapper/xenpro3-root ro console=ttyS0,115200n8 [ 0.000000] console [ttyS0] enabled [ 2.160986] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.203396] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.263296] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.323102] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A root@xenpro3:~# uname -a Linux xenpro3 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux root@xenpro3:~# I have tried putting a ttyS0.conf file in /etc/initab, which solves the problem bare metal but I still cannot get the serial port to work when booting Ubuntu on top of Xen, as domain 0. My serial line output looks like this, when booting Xen /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A * Exporting directories for NFS kernel daemon... [ OK ] * Starting NFS kernel daemon [ OK ] SSL tunnels disabled, see /etc/default/stunnel4 [ 18.654627] XENBUS: Unable to read cpu state [ 18.659631] XENBUS: Unable to read cpu state [ 18.664398] XENBUS: Unable to read cpu state [ 18.669248] XENBUS: Unable to read cpu state * Starting Xen daemons [ OK ] mountall: Disconnected from Plymouth At this point, the serial line is no longer connected to a process. Xen itself is running just fine. Dmesg gives me a long list of [ 120.236841] init: ttyS0 main process ended, respawning [ 120.239717] ttyS0: LSR safety check engaged! [ 130.240265] init: ttyS0 main process (1631) terminated with status 1 [ 130.240294] init: ttyS0 main process ended, respawning [ 130.242970] ttyS0: LSR safety check engaged! which is no surprise because I see root@xenpro3:~# ls -l /dev/ttyS? crw-rw---- 1 root tty 4, 64 Nov 7 14:04 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 Nov 7 14:04 /dev/ttyS1 crw-rw---- 1 root dialout 4, 66 Nov 7 14:04 /dev/ttyS2 crw-rw---- 1 root dialout 4, 67 Nov 7 14:04 /dev/ttyS3 crw-rw---- 1 root dialout 4, 68 Nov 7 14:04 /dev/ttyS4 crw-rw---- 1 root dialout 4, 69 Nov 7 14:04 /dev/ttyS5 crw-rw---- 1 root dialout 4, 70 Nov 7 14:04 /dev/ttyS6 crw-rw---- 1 root dialout 4, 71 Nov 7 14:04 /dev/ttyS7 crw-rw---- 1 root dialout 4, 72 Nov 7 14:04 /dev/ttyS8 crw-rw---- 1 root dialout 4, 73 Nov 7 14:04 /dev/ttyS9 If I manually change the group of /dev/ttyS0 to dialout, it gets changed back. I have made no changes to the default udev rules, so I cannot see where this problem is coming from. Sincerely, John

  Read the article

• Eclipse Juno, need root access everytime I change the configuration

  - by veepsk

  I am trying to install eclipse Juno on 12.04. I did all the things instructed in this link. But whenever I install any new software (Say CDT or Pydev) on Eclipse, the new softwares are gone upon opening the Eclipse app again. I then have to open Eclipse again with root privileges to install all the software. I also ran into many problems with linking the include library for Eclipse CDT. Can anyone help me with installing Juno in a way that I do not need root access every time I change configurations in Eclipse?

  Read the article

• 11.10 suddenly became 2d

  - by Sergey Kravchenya

  After today's update ubuntu became 2d despite the fact that I logged in under "ubuntu" not "ubuntu 2d". Also some other issues appeared (e.g. my shortcuts rolled back, num pad doesn't work, caps lock key don't have any effect on case, when I'm typing in dash - it doubles every letter - 'n' -- 'nn' ) Here is update log: Setting up google-chrome-stable (17.0.963.83-r127885) ... Setting up libavutil51 (4:0.8.1-1~ppa1) ... Setting up libpostproc52 (4:0.8.1-1~ppa1) ... Setting up libswscale2 (4:0.8.1-1~ppa1) ... Setting up libavcodec53 (4:0.8.1-1~ppa1) ... Setting up libavformat53 (4:0.8.1-1~ppa1) ... Setting up libbluray1 (1:0.2.2-1~ppa1) ... Setting up libmp3lame0 (3.99.5+repack1-3~ppa1) ... Setting up libx264-120 (2:0.120.2171+git01f7a33-3~ppa1) ... Setting up libxvidcore4 (2:1.3.2-9~ppa1) ... Setting up thunderbird (11.0+build1-0ubuntu0.11.10.1) ... Installing new version of config file /etc/apport/blacklist.d/thunderbird ... Setting up thunderbird-globalmenu (11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-gnome-support (11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-locale-en (1:11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-locale-en-gb (1:11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-locale-en-us (1:11.0+build1-0ubuntu0.11.10.1) ... Setting up thunderbird-locale-ru (1:11.0+build1-0ubuntu0.11.10.1) ... Setting up ubuntu-tweak (0.6.2-1~oneiric1) ... Setting up xul-ext-calendar-timezones (1.3+build1-0ubuntu0.11.10.1) ... Setting up xul-ext-lightning (1.3+build1-0ubuntu0.11.10.1) ... Setting up xul-ext-gdata-provider (1.3+build1-0ubuntu0.11.10.1) ... What can I do to find what cause of this problem? What additional information should I provide to help you help me?

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >