catch block - Page 134 - Developer IT

W006.15 isp or T-mobile Network Error.

- by Mike Koerner

I just bought a new T-Mobile G2. I wanted to turn on Wifi calling but kept receiving "W006.15 isp or T-mobile Network Error" and asking me to register. After doing some research I looked at my cable modem/router logs and config. There were fragmented packets originating from the phone and the incoming fragmented packets were blocked. I disabled the "Block fragmented packets" setting and the phone was able to connect for Wifi calling

Read the article

Using Unity – Part 1

- by nmarun

I have been going through implementing some IoC pattern using Unity and so I decided to share my learnings (I know that’s not an English word, but you get the point). Ok, so I have an ASP.net project named ProductWeb and a class library called ProductModel. In the model library, I have a class called Product: 1: public class Product 2: { 3: public string Name { get; set; } 4: public string Description { get; set; } 5: 6: public Product() 7: { 8: Name = "iPad"; 9: Description = "Not just a reader!"; 10: } 11: 12: public string WriteProductDetails() 13: { 14: return string.Format("Name: {0} Description: {1}", Name, Description); 15: } 16: } In the Page_Load event of the default.aspx, I’ll need something like: 1: Product product = new Product(); 2: productDetailsLabel.Text = product.WriteProductDetails(); Now, let’s go ‘Unity’fy this application. I assume you have all the bits for the pattern. If not, get it from here. I found this schematic representation of Unity pattern from the above link. This image might not make much sense to you now, but as we proceed, things will get better. The first step to implement the Inversion of Control pattern is to create interfaces that your types will implement. An IProduct interface is added to the ProductModel project. 1: public interface IProduct 2: { 3: string WriteProductDetails(); 4: } Let’s make our Product class to implement the IProduct interface. The application will compile and run as before despite the changes made. Add the following references to your web project: Microsoft.Practices.Unity Microsoft.Practices.Unity.Configuration Microsoft.Practices.Unity.StaticFactory Microsoft.Practices.ObjectBuilder2 We need to add a few lines to the web.config file. The line below tells what version of Unity pattern we’ll be using. 1: <configSections> 2: <section name="unity" type="Microsoft.Practices.Unity.Configuration.UnityConfigurationSection, Microsoft.Practices.Unity.Configuration, Version=1.2.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> 3: </configSections> Add another block with the same name as the section name declared above – ‘unity’. 1: <unity> 2: <typeAliases> 3:  4: <typeAlias alias="IProduct" type="ProductModel.IProduct, ProductModel"/> 5: <typeAlias alias="Product" type="ProductModel.Product, ProductModel"/> 6: </typeAliases> 7: <containers> 8: <container name="unityContainer"> 9: <types> 10: <type type="IProduct" mapTo="Product"/> 11: </types> 12: </container> 13: </containers> 14: </unity> From the Unity Configuration schematic shown above, you see that the ‘unity’ block has a ‘typeAliases’ and a ‘containers’ segment. The typeAlias element gives a ‘short-name’ for a type. This ‘short-name’ can be used to point to this type any where in the configuration file (web.config in our case, but all this information could be coming from an external xml file as well). The container element holds all the mapping information. This container is referenced through its name attribute in the code and you can have multiple of these container elements in the containers segment. The ‘type’ element in line 10 basically says: ‘When Unity requests to resolve the alias IProduct, return an instance of whatever the short-name of Product points to’. This is the most basic piece of Unity pattern and all of this is accomplished purely through configuration. So, in future you have a change in your model, all you need to do is - implement IProduct on the new model class and - either add a typeAlias for the new type and point the mapTo attribute to the new alias declared - or modify the mapTo attribute of the type element to point to the new alias (as the case may be). Now for the calling code. It’s a good idea to store your unity container details in the Application cache, as this is rarely bound to change and also adds for better performance. The Global.asax.cs file comes for our rescue: 1: protected void Application_Start(object sender, EventArgs e) 2: { 3: // create and populate a new Unity container from configuration 4: IUnityContainer unityContainer = new UnityContainer(); 5: UnityConfigurationSection section = (UnityConfigurationSection)ConfigurationManager.GetSection("unity"); 6: section.Containers["unityContainer"].Configure(unityContainer); 7: Application["UnityContainer"] = unityContainer; 8: } 9: 10: protected void Application_End(object sender, EventArgs e) 11: { 12: Application["UnityContainer"] = null; 13: } All this says is: create an instance of UnityContainer() and read the ‘unity’ section from the configSections segment of the web.config file. Then get the container named ‘unityContainer’ and store it in the Application cache. In my code-behind file, I’ll make use of this UnityContainer to create an instance of the Product type. 1: public partial class _Default : Page 2: { 3: private IUnityContainer unityContainer; 4: protected void Page_Load(object sender, EventArgs e) 5: { 6: unityContainer = Application["UnityContainer"] as IUnityContainer; 7: if (unityContainer == null) 8: { 9: productDetailsLabel.Text = "ERROR: Unity Container not populated in Global.asax.<p />"; 10: } 11: else 12: { 13: IProduct productInstance = unityContainer.Resolve<IProduct>(); 14: productDetailsLabel.Text = productInstance.WriteProductDetails(); 15: } 16: } 17: } Looking the ‘else’ block, I’m asking the unityContainer object to resolve the IProduct type. All this does, is to look at the matching type in the container, read its mapTo attribute value, get the full name from the alias and create an instance of the Product class. Fabulous!! I’ll go more in detail in the next blog. The code for this blog can be found here.

Read the article

Parallelism in .NET – Part 10, Cancellation in PLINQ and the Parallel class

- by Reed

Many routines are parallelized because they are long running processes. When writing an algorithm that will run for a long period of time, its typically a good practice to allow that routine to be cancelled. I previously discussed terminating a parallel loop from within, but have not demonstrated how a routine can be cancelled from the caller’s perspective. Cancellation in PLINQ and the Task Parallel Library is handled through a new, unified cooperative cancellation model introduced with .NET 4.0. Cancellation in .NET 4 is based around a new, lightweight struct called CancellationToken. A CancellationToken is a small, thread-safe value type which is generated via a CancellationTokenSource. There are many goals which led to this design. For our purposes, we will focus on a couple of specific design decisions: Cancellation is cooperative. A calling method can request a cancellation, but it’s up to the processing routine to terminate – it is not forced. Cancellation is consistent. A single method call requests a cancellation on every copied CancellationToken in the routine. Let’s begin by looking at how we can cancel a PLINQ query. Supposed we wanted to provide the option to cancel our query from Part 6: double min = collection .AsParallel() .Min(item => item.PerformComputation()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We would rewrite this to allow for cancellation by adding a call to ParallelEnumerable.WithCancellation as follows: var cts = new CancellationTokenSource(); // Pass cts here to a routine that could, // in parallel, request a cancellation try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation()); } catch (OperationCanceledException e) { // Query was cancelled before it finished } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, if the user calls cts.Cancel() before the PLINQ query completes, the query will stop processing, and an OperationCanceledException will be raised. Be aware, however, that cancellation will not be instantaneous. When cts.Cancel() is called, the query will only stop after the current item.PerformComputation() elements all finish processing. cts.Cancel() will prevent PLINQ from scheduling a new task for a new element, but will not stop items which are currently being processed. This goes back to the first goal I mentioned – Cancellation is cooperative. Here, we’re requesting the cancellation, but it’s up to PLINQ to terminate. If we wanted to allow cancellation to occur within our routine, we would need to change our routine to accept a CancellationToken, and modify it to handle this specific case: public void PerformComputation(CancellationToken token) { for (int i=0; i<this.iterations; ++i) { // Add a check to see if we've been canceled // If a cancel was requested, we'll throw here token.ThrowIfCancellationRequested(); // Do our processing now this.RunIteration(i); } } With this overload of PerformComputation, each internal iteration checks to see if a cancellation request was made, and will throw an OperationCanceledException at that point, instead of waiting until the method returns. This is good, since it allows us, as developers, to plan for cancellation, and terminate our routine in a clean, safe state. This is handled by changing our PLINQ query to: try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation(cts.Token)); } catch (OperationCanceledException e) { // Query was cancelled before it finished } PLINQ is very good about handling this exception, as well. There is a very good chance that multiple items will raise this exception, since the entire purpose of PLINQ is to have multiple items be processed concurrently. PLINQ will take all of the OperationCanceledException instances raised within these methods, and merge them into a single OperationCanceledException in the call stack. This is done internally because we added the call to ParallelEnumerable.WithCancellation. If, however, a different exception is raised by any of the elements, the OperationCanceledException as well as the other Exception will be merged into a single AggregateException. The Task Parallel Library uses the same cancellation model, as well. Here, we supply our CancellationToken as part of the configuration. The ParallelOptions class contains a property for the CancellationToken. This allows us to cancel a Parallel.For or Parallel.ForEach routine in a very similar manner to our PLINQ query. As an example, we could rewrite our Parallel.ForEach loop from Part 2 to support cancellation by changing it to: try { var cts = new CancellationTokenSource(); var options = new ParallelOptions() { CancellationToken = cts.Token }; Parallel.ForEach(customers, options, customer => { // Run some process that takes some time... DateTime lastContact = theStore.GetLastContact(customer); TimeSpan timeSinceContact = DateTime.Now - lastContact; // Check for cancellation here options.CancellationToken.ThrowIfCancellationRequested(); // If it's been more than two weeks, send an email, and update... if (timeSinceContact.Days > 14) { theStore.EmailCustomer(customer); customer.LastEmailContact = DateTime.Now; } }); } catch (OperationCanceledException e) { // The loop was cancelled } Notice that here we use the same approach taken in PLINQ. The Task Parallel Library will automatically handle our cancellation in the same manner as PLINQ, providing a clean, unified model for cancellation of any parallel routine. The TPL performs the same aggregation of the cancellation exceptions as PLINQ, as well, which is why a single exception handler for OperationCanceledException will cleanly handle this scenario. This works because we’re using the same CancellationToken provided in the ParallelOptions. If a different exception was thrown by one thread, or a CancellationToken from a different CancellationTokenSource was used to raise our exception, we would instead receive all of our individual exceptions merged into one AggregateException.

Read the article

Basics of Join Predicate Pushdown in Oracle

- by Maria Colgan

Happy New Year to all of our readers! We hope you all had a great holiday season. We start the new year by continuing our series on Optimizer transformations. This time it is the turn of Predicate Pushdown. I would like to thank Rafi Ahmed for the content of this blog.Normally, a view cannot be joined with an index-based nested loop (i.e., index access) join, since a view, in contrast with a base table, does not have an index defined on it. A view can only be joined with other tables using three methods: hash, nested loop, and sort-merge joins. Introduction The join predicate pushdown (JPPD) transformation allows a view to be joined with index-based nested-loop join method, which may provide a more optimal alternative. In the join predicate pushdown transformation, the view remains a separate query block, but it contains the join predicate, which is pushed down from its containing query block into the view. The view thus becomes correlated and must be evaluated for each row of the outer query block. These pushed-down join predicates, once inside the view, open up new index access paths on the base tables inside the view; this allows the view to be joined with index-based nested-loop join method, thereby enabling the optimizer to select an efficient execution plan. The join predicate pushdown transformation is not always optimal. The join predicate pushed-down view becomes correlated and it must be evaluated for each outer row; if there is a large number of outer rows, the cost of evaluating the view multiple times may make the nested-loop join suboptimal, and therefore joining the view with hash or sort-merge join method may be more efficient. The decision whether to push down join predicates into a view is determined by evaluating the costs of the outer query with and without the join predicate pushdown transformation under Oracle's cost-based query transformation framework. The join predicate pushdown transformation applies to both non-mergeable views and mergeable views and to pre-defined and inline views as well as to views generated internally by the optimizer during various transformations. The following shows the types of views on which join predicate pushdown is currently supported. UNION ALL/UNION view Outer-joined view Anti-joined view Semi-joined view DISTINCT view GROUP-BY view Examples Consider query A, which has an outer-joined view V. The view cannot be merged, as it contains two tables, and the join between these two tables must be performed before the join between the view and the outer table T4. A: SELECT T4.unique1, V.unique3 FROM T_4K T4, (SELECT T10.unique3, T10.hundred, T10.ten FROM T_5K T5, T_10K T10 WHERE T5.unique3 = T10.unique3) VWHERE T4.unique3 = V.hundred(+) AND T4.ten = V.ten(+) AND T4.thousand = 5; The following shows the non-default plan for query A generated by disabling join predicate pushdown. When query A undergoes join predicate pushdown, it yields query B. Note that query B is expressed in a non-standard SQL and shows an internal representation of the query. B: SELECT T4.unique1, V.unique3 FROM T_4K T4, (SELECT T10.unique3, T10.hundred, T10.ten FROM T_5K T5, T_10K T10 WHERE T5.unique3 = T10.unique3 AND T4.unique3 = V.hundred(+) AND T4.ten = V.ten(+)) V WHERE T4.thousand = 5; The execution plan for query B is shown below. In the execution plan BX, note the keyword 'VIEW PUSHED PREDICATE' indicates that the view has undergone the join predicate pushdown transformation. The join predicates (shown here in red) have been moved into the view V; these join predicates open up index access paths thereby enabling index-based nested-loop join of the view. With join predicate pushdown, the cost of query A has come down from 62 to 32. As mentioned earlier, the join predicate pushdown transformation is cost-based, and a join predicate pushed-down plan is selected only when it reduces the overall cost. Consider another example of a query C, which contains a view with the UNION ALL set operator.C: SELECT R.unique1, V.unique3 FROM T_5K R, (SELECT T1.unique3, T2.unique1+T1.unique1 FROM T_5K T1, T_10K T2 WHERE T1.unique1 = T2.unique1 UNION ALL SELECT T1.unique3, T2.unique2 FROM G_4K T1, T_10K T2 WHERE T1.unique1 = T2.unique1) V WHERE R.unique3 = V.unique3 and R.thousand < 1; The execution plan of query C is shown below. In the above, 'VIEW UNION ALL PUSHED PREDICATE' indicates that the UNION ALL view has undergone the join predicate pushdown transformation. As can be seen, here the join predicate has been replicated and pushed inside every branch of the UNION ALL view. The join predicates (shown here in red) open up index access paths thereby enabling index-based nested loop join of the view. Consider query D as an example of join predicate pushdown into a distinct view. We have the following cardinalities of the tables involved in query D: Sales (1,016,271), Customers (50,000), and Costs (787,766). D: SELECT C.cust_last_name, C.cust_city FROM customers C, (SELECT DISTINCT S.cust_id FROM sales S, costs CT WHERE S.prod_id = CT.prod_id and CT.unit_price > 70) V WHERE C.cust_state_province = 'CA' and C.cust_id = V.cust_id; The execution plan of query D is shown below. As shown in XD, when query D undergoes join predicate pushdown transformation, the expensive DISTINCT operator is removed and the join is converted into a semi-join; this is possible, since all the SELECT list items of the view participate in an equi-join with the outer tables. Under similar conditions, when a group-by view undergoes join predicate pushdown transformation, the expensive group-by operator can also be removed. With the join predicate pushdown transformation, the elapsed time of query D came down from 63 seconds to 5 seconds. Since distinct and group-by views are mergeable views, the cost-based transformation framework also compares the cost of merging the view with that of join predicate pushdown in selecting the most optimal execution plan. Summary We have tried to illustrate the basic ideas behind join predicate pushdown on different types of views by showing example queries that are quite simple. Oracle can handle far more complex queries and other types of views not shown here in the examples. Again many thanks to Rafi Ahmed for the content of this blog post.

Read the article

WatiN screenshot saver

- by Brian Schroer

In addition to my automated unit, system and integration tests for ASP.NET projects, I like to give my customers something pretty that they can look at and visually see that the web site is behaving properly. I use the Gallio test runner to produce a pretty HTML report, and WatiN (Web Application Testing In .NET) to test the UI and create screenshots. I have a couple of issues with WatiN’s “CaptureWebPageToFile” method, though: It blew up the first (and only) time I tried it, possibly because… It scrolls down to capture the entire web page (I tried it on a very long page), and I usually don’t need that Also, sometimes I don’t need a picture of the whole browser window - I just want a picture of the element that I'm testing (for example, proving that a button has the correct caption). I wrote a WatiN screenshot saver helper class with these methods: SaveBrowserWindowScreenshot(Watin.Core.IE ie) / SaveBrowserWindowScreenshot(Watin.Core.Element element) saves a screenshot of the browser window SaveBrowserWindowScreenshotWithHighlight(Watin.Core.Element element) saves a screenshot of the browser window, with the specified element scrolled into view and highlighted SaveElementScreenshot(Watin.Core.Element element) saves a picture of only the specified element The element highlighting improves on the built-in WatiN method (which just gives the element a yellow background, and makes the element pretty much unreadable when you have a light foreground color) by adding the ability to specify a HighlightCssClassName that points to a style in your site’s stylesheet. This code is specifically for testing with Internet Explorer (‘cause that’s what I have to test with at work), but you’re welcome to take it and do with it what you want… using System; using System.Drawing; using System.Drawing.Imaging; using System.IO; using System.Reflection; using System.Runtime.InteropServices; using System.Text; using System.Threading; using SHDocVw; using WatiN.Core; using mshtml; namespace BrianSchroer.TestHelpers { public static class WatinScreenshotSaver { public static void SaveBrowserWindowScreenshotWithHighlight (Element element, string screenshotName) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element, screenshotName); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshotWithHighlight(Element element) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshot(Element element, string screenshotName) { SaveScreenshot(GetIe(element), screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(Element element) { SaveScreenshot(GetIe(element), null, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie, string screenshotName) { SaveScreenshot(ie, screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie) { SaveScreenshot(ie, null, SaveBitmapForCallbackArgs); } public static void SaveElementScreenshot(Element element, string screenshotName) { // TODO: Figure out how to get browser window "chrome" size and not have to go to full screen: var iex = (InternetExplorerClass) GetIe(element).InternetExplorer; bool fullScreen = iex.FullScreen; if (!fullScreen) iex.FullScreen = true; ScrollIntoView(element); SaveScreenshot(GetIe(element), screenshotName, args => SaveElementBitmapForCallbackArgs(element, args)); iex.FullScreen = fullScreen; } public static void SaveElementScreenshot(Element element) { SaveElementScreenshot(element, null); } private static void SaveScreenshot(IE browser, string screenshotName, Action<ScreenshotCallbackArgs> screenshotCallback) { string fileName = string.Format("{0:000}{1}{2}.jpg", ++_screenshotCount, (string.IsNullOrEmpty(screenshotName)) ? "" : " ", screenshotName); string path = Path.Combine(ScreenshotDirectoryName, fileName); Console.WriteLine(); // Gallio HTML-encodes the following display, but I have a utility program to // remove the "HTML===" and "===HTML" and un-encode the rest to show images in the Gallio report: Console.WriteLine("HTML===<div><b>{0}:</br></b><img src=\"{1}\" /></div>===HTML", screenshotName, new Uri(path).AbsoluteUri); MakeBrowserWindowTopmost(browser); try { var args = new ScreenshotCallbackArgs { InternetExplorerClass = (InternetExplorerClass)browser.InternetExplorer, ScreenshotPath = path }; Thread.Sleep(100); screenshotCallback(args); } catch (Exception ex) { Console.WriteLine(ex.Message); } } public static void HighlightElement(Element element, bool doHighlight) { if (!element.Exists) return; if (string.IsNullOrEmpty(HighlightCssClassName)) { element.Highlight(doHighlight); return; } string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); string format = (doHighlight) ? "{0}.className += ' {1}'" : "{0}.className = {0}.className.replace(' {1}', '')"; sb.AppendFormat(" " + format + ";", jsRef, HighlightCssClassName); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void ScrollIntoView(Element element) { string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void MakeBrowserWindowTopmost(IE ie) { ie.BringToFront(); SetWindowPos(ie.hWnd, HWND_TOPMOST, 0, 0, 0, 0, TOPMOST_FLAGS); } public static string HighlightCssClassName { get; set; } private static int _screenshotCount; private static string _screenshotDirectoryName; public static string ScreenshotDirectoryName { get { if (_screenshotDirectoryName == null) { var asm = Assembly.GetAssembly(typeof(WatinScreenshotSaver)); var uri = new Uri(asm.CodeBase); var fileInfo = new FileInfo(uri.LocalPath); string directoryName = fileInfo.DirectoryName; _screenshotDirectoryName = Path.Combine( directoryName, string.Format("Screenshots_{0:yyyyMMddHHmm}", DateTime.Now)); Console.WriteLine("Screenshot folder: {0}", _screenshotDirectoryName); Directory.CreateDirectory(_screenshotDirectoryName); } return _screenshotDirectoryName; } set { _screenshotDirectoryName = value; _screenshotCount = 0; } } [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags); private static readonly IntPtr HWND_TOPMOST = new IntPtr(-1); private const UInt32 SWP_NOSIZE = 0x0001; private const UInt32 SWP_NOMOVE = 0x0002; private const UInt32 TOPMOST_FLAGS = SWP_NOMOVE | SWP_NOSIZE; private static IE GetIe(Element element) { if (element == null) return null; var container = element.DomContainer; while (container as IE == null) container = container.DomContainer; return (IE)container; } private static void SaveBitmapForCallbackArgs(ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; SaveBitmap(args.ScreenshotPath, iex.Left, iex.Top, iex.Width, iex.Height); } private static void SaveElementBitmapForCallbackArgs(Element element, ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; Rectangle bounds = GetElementBounds(element); SaveBitmap(args.ScreenshotPath, iex.Left + bounds.Left, iex.Top + bounds.Top, bounds.Width, bounds.Height); } /// <summary> /// This method is used instead of element.NativeElement.GetElementBounds because that /// method has a bug (http://sourceforge.net/tracker/?func=detail&aid=2994660&group_id=167632&atid=843727). /// </summary> private static Rectangle GetElementBounds(Element element) { var ieElem = element.NativeElement as WatiN.Core.Native.InternetExplorer.IEElement; IHTMLElement elem = ieElem.AsHtmlElement; int left = elem.offsetLeft; int top = elem.offsetTop; for (IHTMLElement parent = elem.offsetParent; parent != null; parent = parent.offsetParent) { left += parent.offsetLeft; top += parent.offsetTop; } return new Rectangle(left, top, elem.offsetWidth, elem.offsetHeight); } private static void SaveBitmap(string path, int left, int top, int width, int height) { using (var bitmap = new Bitmap(width, height)) { using (Graphics g = Graphics.FromImage(bitmap)) { g.CopyFromScreen( new Point(left, top), Point.Empty, new Size(width, height) ); } bitmap.Save(path, ImageFormat.Jpeg); } } private class ScreenshotCallbackArgs { public InternetExplorerClass InternetExplorerClass { get; set; } public string ScreenshotPath { get; set; } } } }

Read the article

Enterprise Library Logging / Exception handling and Postsharp

- by subodhnpushpak

One of my colleagues came-up with a unique situation where it was required to create log files based on the input file which is uploaded. For example if A.xml is uploaded, the corresponding log file should be A_log.txt. I am a strong believer that Logging / EH / caching are cross-cutting architecture aspects and should be least invasive to the business-logic written in enterprise application. I have been using Enterprise Library for logging / EH (i use to work with Avanade, so i have affection towards the library!! :D ). I have been also using excellent library called PostSharp for cross cutting aspect. Here i present a solution with and without PostSharp all in a unit test. Please see full source code at end of the this blog post. But first, we need to tweak the enterprise library so that the log files are created at runtime based on input given. Below is Custom trace listner which writes log into a given file extracted out of Logentry extendedProperties property. using Microsoft.Practices.EnterpriseLibrary.Common.Configuration; using Microsoft.Practices.EnterpriseLibrary.Logging.Configuration; using Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners; using Microsoft.Practices.EnterpriseLibrary.Logging; using System.IO; using System.Text; using System; using System.Diagnostics; namespace Subodh.Framework.Logging { [ConfigurationElementType(typeof(CustomTraceListenerData))] public class LogToFileTraceListener : CustomTraceListener { private static object syncRoot = new object(); public override void TraceData(TraceEventCache eventCache, string source, TraceEventType eventType, int id, object data) { if ((data is LogEntry) & this.Formatter != null) { WriteOutToLog(this.Formatter.Format((LogEntry)data), (LogEntry)data); } else { WriteOutToLog(data.ToString(), (LogEntry)data); } } public override void Write(string message) { Debug.Print(message.ToString()); } public override void WriteLine(string message) { Debug.Print(message.ToString()); } private void WriteOutToLog(string BodyText, LogEntry logentry) { try { //Get the filelocation from the extended properties if (logentry.ExtendedProperties.ContainsKey("filelocation")) { string fullPath = Path.GetFullPath(logentry.ExtendedProperties["filelocation"].ToString()); //Create the directory where the log file is written to if it does not exist. DirectoryInfo directoryInfo = new DirectoryInfo(Path.GetDirectoryName(fullPath)); if (directoryInfo.Exists == false) { directoryInfo.Create(); } //Lock the file to prevent another process from using this file //as data is being written to it. lock (syncRoot) { using (FileStream fs = new FileStream(fullPath, FileMode.Append, FileAccess.Write, FileShare.Write, 4096, true)) { using (StreamWriter sw = new StreamWriter(fs, Encoding.UTF8)) { Log(BodyText, sw); sw.Close(); } fs.Close(); } } } } catch (Exception ex) { throw new LoggingException(ex.Message, ex); } } /// <summary> /// Write message to named file /// </summary> public static void Log(string logMessage, TextWriter w) { w.WriteLine("{0}", logMessage); } } } The above can be “plugged into” the code using below configuration <loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="Trace" logWarningsWhenNoCategoriesMatch="true"> <listeners> <add listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.CustomTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Subodh.Framework.Logging.LogToFileTraceListener, Subodh.Framework.Logging, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" name="Subodh Custom Trace Listener" initializeData="" formatter="Text Formatter" /> </listeners> Similarly we can use PostSharp to expose the above as cross cutting aspects as below using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Reflection; using PostSharp.Laos; using System.Diagnostics; using GC.FrameworkServices.ExceptionHandler; using Subodh.Framework.Logging; namespace Subodh.Framework.ExceptionHandling { [Serializable] public sealed class LogExceptionAttribute : OnExceptionAspect { private string prefix; private MethodFormatStrings formatStrings; // This field is not serialized. It is used only at compile time. [NonSerialized] private readonly Type exceptionType; private string fileName; /// <summary> /// Declares a <see cref="XTraceExceptionAttribute"/> custom attribute /// that logs every exception flowing out of the methods to which /// the custom attribute is applied. /// </summary> public LogExceptionAttribute() { } /// <summary> /// Declares a <see cref="XTraceExceptionAttribute"/> custom attribute /// that logs every exception derived from a given <see cref="Type"/> /// flowing out of the methods to which /// the custom attribute is applied. /// </summary> /// <param name="exceptionType"></param> public LogExceptionAttribute( Type exceptionType ) { this.exceptionType = exceptionType; } public LogExceptionAttribute(Type exceptionType, string fileName) { this.exceptionType = exceptionType; this.fileName = fileName; } /// <summary> /// Gets or sets the prefix string, printed before every trace message. /// </summary> /// <value> /// For instance <c>[Exception]</c>. /// </value> public string Prefix { get { return this.prefix; } set { this.prefix = value; } } /// <summary> /// Initializes the current object. Called at compile time by PostSharp. /// </summary> /// <param name="method">Method to which the current instance is /// associated.</param> public override void CompileTimeInitialize( MethodBase method ) { // We just initialize our fields. They will be serialized at compile-time // and deserialized at runtime. this.formatStrings = Formatter.GetMethodFormatStrings( method ); this.prefix = Formatter.NormalizePrefix( this.prefix ); } public override Type GetExceptionType( MethodBase method ) { return this.exceptionType; } /// <summary> /// Method executed when an exception occurs in the methods to which the current /// custom attribute has been applied. We just write a record to the tracing /// subsystem. /// </summary> /// <param name="context">Event arguments specifying which method /// is being called and with which parameters.</param> public override void OnException( MethodExecutionEventArgs context ) { string message = String.Format("{0}Exception {1} {{{2}}} in {{{3}}}. \r\n\r\nStack Trace {4}", this.prefix, context.Exception.GetType().Name, context.Exception.Message, this.formatStrings.Format(context.Instance, context.Method, context.GetReadOnlyArgumentArray()), context.Exception.StackTrace); if(!string.IsNullOrEmpty(fileName)) { ApplicationLogger.LogException(message, fileName); } else { ApplicationLogger.LogException(message, Source.UtilityService); } } } } To use the above below is the unit test [TestMethod] [ExpectedException(typeof(NotImplementedException))] public void TestMethod1() { MethodThrowingExceptionForLog(); try { MethodThrowingExceptionForLogWithPostSharp(); } catch (NotImplementedException ex) { throw ex; } } private void MethodThrowingExceptionForLog() { try { throw new NotImplementedException(); } catch (NotImplementedException ex) { // create file and then write log ApplicationLogger.TraceMessage("this is a trace message which will be logged in Test1MyFile", @"D:\EL\Test1Myfile.txt"); ApplicationLogger.TraceMessage("this is a trace message which will be logged in YetAnotherTest1Myfile", @"D:\EL\YetAnotherTest1Myfile.txt"); } } // Automatically log details using attributes // Log exception using attributes .... A La WCF [FaultContract(typeof(FaultMessage))] style] [Log(@"D:\EL\Test1MyfileLogPostsharp.txt")] [LogException(typeof(NotImplementedException), @"D:\EL\Test1MyfileExceptionPostsharp.txt")] private void MethodThrowingExceptionForLogWithPostSharp() { throw new NotImplementedException(); } The good thing about the approach is that all the logging and EH is done at centralized location controlled by PostSharp. Of Course, if some other library has to be used instead of EL, it can easily be plugged in. Also, the coder ARE ONLY involved in writing business code in methods, which makes code cleaner. Here is the full source code. The third party assemblies provided are from EL and PostSharp and i presume you will find these useful. Do let me know your thoughts / ideas on the same. Technorati Tags: PostSharp,Enterprize library,C#,Logging,Exception handling

Read the article

Another "Windows 7 entry missing from Grub2" Question

- by 4x10

Like many before me had the following problem that after installing Ubuntu (with windows 7 already installed), the grub boot loader wouldnt show windows 7 as a boot option, though i can boot fine if I use the "Choose Boot Device" options on the x220. The difference is that I try using UEFI only so many answers didn't really fit my problem, though i tried several stuffs: after running boot repair it destroyed the ubuntu boot loader custom entry in /etc/grub.d/40_custom for windows which doesnt show up many update-grub and reboots trying windows repair recovery thing while being there i also did bootrec.exe /FixBoot and update-grub and reboot again and finaly because it was so much fun, i installed linux all over again, while formatting and deleting everything linux related before that. Now that i think of it, Ubuntu also didn't notice Windows being there during the Setup and it still doesnt according to the Boot Info from Boot Repair. Boot Info Script 0.61-git-patched [23 April 2012] ============================= Boot Info Summary: =============================== => No boot loader is installed in the MBR of /dev/sda. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi /efi/ubuntu/grubx64.efi sda2: __________________________________________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sda4: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu precise (development branch) Boot files: /boot/grub/grub.cfg /etc/fstab sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sda6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 625,142,447 625,142,447 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 206,847 204,800 EFI System partition /dev/sda2 206,848 468,991 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 468,992 170,338,303 169,869,312 Data partition (Windows/Linux) /dev/sda4 170,338,304 330,338,304 160,000,001 Data partition (Windows/Linux) /dev/sda5 330,338,305 617,141,039 286,802,735 Data partition (Windows/Linux) /dev/sda6 617,141,040 625,141,040 8,000,001 Swap partition (Linux) "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 885C-ED1B vfat /dev/sda3 EE06CC0506CBCCB1 ntfs /dev/sda4 604dd3b2-64ca-4200-b8fb-820e8d0ca899 ext4 /dev/sda5 d62515fd-8120-4a74-b17b-0bdf244124a3 ext4 /dev/sda6 7078b649-fb2a-4c59-bd03-fd31ef440d37 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 /boot/efi vfat (rw) /dev/sda4 / ext4 (rw,errors=remount-ro) /dev/sda5 /home ext4 (rw) =========================== sda4/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod efi_gop insmod efi_uga insmod video_bochs insmod video_cirrus } insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-20-generic } menuentry 'Ubuntu, with Linux 3.2.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 echo 'Loading Linux 3.2.0-20-generic ...' linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-20-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda4/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=885C-ED1B /boot/efi vfat defaults 0 1 # /home was on /dev/sda5 during installation UUID=d62515fd-8120-4a74-b17b-0bdf244124a3 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=7078b649-fb2a-4c59-bd03-fd31ef440d37 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda4: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 129.422874451 = 138.966753280 boot/grub/grub.cfg 1 83.059570312 = 89.184534528 boot/initrd.img-3.2.0-20-generic 2 101.393131256 = 108.870045696 boot/vmlinuz-3.2.0-20-generic 1 83.059570312 = 89.184534528 initrd.img 2 101.393131256 = 108.870045696 vmlinuz 1 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-04-25__23h40 =================== boot-repair version : 3.18-0ppa3~precise boot-sav version : 3.18-0ppa4~precise glade2script version : 0.3.2.1-0ppa7~precise internet: connected python-software-properties version : 0.82.7 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 591 not upgraded. dpkg-preconfigure: unable to re-open stdin: No such file or directory boot-repair is executed in installed-session (Ubuntu precise (development branch) , precise , Ubuntu , x86_64) WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== OSPROBER: /dev/sda4:The OS now in use - Ubuntu precise (development branch) CurrentSession:linux =================== BLKID: /dev/sda3: UUID="EE06CC0506CBCCB1" TYPE="ntfs" /dev/sda1: UUID="885C-ED1B" TYPE="vfat" /dev/sda4: UUID="604dd3b2-64ca-4200-b8fb-820e8d0ca899" TYPE="ext4" /dev/sda5: UUID="d62515fd-8120-4a74-b17b-0bdf244124a3" TYPE="ext4" /dev/sda6: UUID="7078b649-fb2a-4c59-bd03-fd31ef440d37" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted. =================== /etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" EFI_OF_PART[1] (, ) =================== dmesg | grep EFI : [ 0.000000] EFI v2.00 by Lenovo [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI! [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000004e000) (0MB) [ 0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000004e000-0x0000000000058000) (0MB) [ 0.000000] EFI: mem03: type=10, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005e000) (0MB) [ 0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000005e000-0x000000000005f000) (0MB) [ 0.000000] EFI: mem06: type=3, attr=0xf, range=[0x000000000005f000-0x00000000000a0000) (0MB) [ 0.000000] EFI: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005b9000) (4MB) [ 0.000000] EFI: mem08: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB) [ 0.000000] EFI: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB) [ 0.000000] EFI: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x00000000364e4000) (354MB) [ 0.000000] EFI: mem11: type=2, attr=0xf, range=[0x00000000364e4000-0x000000003726a000) (13MB) [ 0.000000] EFI: mem12: type=7, attr=0xf, range=[0x000000003726a000-0x0000000040000000) (141MB) [ 0.000000] EFI: mem13: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB) [ 0.000000] EFI: mem14: type=7, attr=0xf, range=[0x0000000040200000-0x000000009df35000) (1501MB) [ 0.000000] EFI: mem15: type=2, attr=0xf, range=[0x000000009df35000-0x00000000d39a0000) (858MB) [ 0.000000] EFI: mem16: type=4, attr=0xf, range=[0x00000000d39a0000-0x00000000d39c0000) (0MB) [ 0.000000] EFI: mem17: type=7, attr=0xf, range=[0x00000000d39c0000-0x00000000d5df5000) (36MB) [ 0.000000] EFI: mem18: type=4, attr=0xf, range=[0x00000000d5df5000-0x00000000d6990000) (11MB) [ 0.000000] EFI: mem19: type=7, attr=0xf, range=[0x00000000d6990000-0x00000000d6b82000) (1MB) [ 0.000000] EFI: mem20: type=1, attr=0xf, range=[0x00000000d6b82000-0x00000000d6b9f000) (0MB) [ 0.000000] EFI: mem21: type=7, attr=0xf, range=[0x00000000d6b9f000-0x00000000d77b0000) (12MB) [ 0.000000] EFI: mem22: type=4, attr=0xf, range=[0x00000000d77b0000-0x00000000d780a000) (0MB) [ 0.000000] EFI: mem23: type=7, attr=0xf, range=[0x00000000d780a000-0x00000000d7826000) (0MB) [ 0.000000] EFI: mem24: type=4, attr=0xf, range=[0x00000000d7826000-0x00000000d7868000) (0MB) [ 0.000000] EFI: mem25: type=7, attr=0xf, range=[0x00000000d7868000-0x00000000d7869000) (0MB) [ 0.000000] EFI: mem26: type=4, attr=0xf, range=[0x00000000d7869000-0x00000000d786a000) (0MB) [ 0.000000] EFI: mem27: type=7, attr=0xf, range=[0x00000000d786a000-0x00000000d786b000) (0MB) [ 0.000000] EFI: mem28: type=4, attr=0xf, range=[0x00000000d786b000-0x00000000d786c000) (0MB) [ 0.000000] EFI: mem29: type=7, attr=0xf, range=[0x00000000d786c000-0x00000000d786d000) (0MB) [ 0.000000] EFI: mem30: type=4, attr=0xf, range=[0x00000000d786d000-0x00000000d825f000) (9MB) [ 0.000000] EFI: mem31: type=7, attr=0xf, range=[0x00000000d825f000-0x00000000d8261000) (0MB) [ 0.000000] EFI: mem32: type=4, attr=0xf, range=[0x00000000d8261000-0x00000000d82f7000) (0MB) [ 0.000000] EFI: mem33: type=7, attr=0xf, range=[0x00000000d82f7000-0x00000000d82f8000) (0MB) [ 0.000000] EFI: mem34: type=4, attr=0xf, range=[0x00000000d82f8000-0x00000000d8705000) (4MB) [ 0.000000] EFI: mem35: type=7, attr=0xf, range=[0x00000000d8705000-0x00000000d8706000) (0MB) [ 0.000000] EFI: mem36: type=4, attr=0xf, range=[0x00000000d8706000-0x00000000d8761000) (0MB) [ 0.000000] EFI: mem37: type=7, attr=0xf, range=[0x00000000d8761000-0x00000000d8768000) (0MB) [ 0.000000] EFI: mem38: type=4, attr=0xf, range=[0x00000000d8768000-0x00000000d9b9f000) (20MB) [ 0.000000] EFI: mem39: type=7, attr=0xf, range=[0x00000000d9b9f000-0x00000000d9e4c000) (2MB) [ 0.000000] EFI: mem40: type=2, attr=0xf, range=[0x00000000d9e4c000-0x00000000d9e52000) (0MB) [ 0.000000] EFI: mem41: type=3, attr=0xf, range=[0x00000000d9e52000-0x00000000da59f000) (7MB) [ 0.000000] EFI: mem42: type=5, attr=0x800000000000000f, range=[0x00000000da59f000-0x00000000da6c3000) (1MB) [ 0.000000] EFI: mem43: type=5, attr=0x800000000000000f, range=[0x00000000da6c3000-0x00000000da79f000) (0MB) [ 0.000000] EFI: mem44: type=6, attr=0x800000000000000f, range=[0x00000000da79f000-0x00000000da8b1000) (1MB) [ 0.000000] EFI: mem45: type=6, attr=0x800000000000000f, range=[0x00000000da8b1000-0x00000000da99f000) (0MB) [ 0.000000] EFI: mem46: type=0, attr=0xf, range=[0x00000000da99f000-0x00000000daa22000) (0MB) [ 0.000000] EFI: mem47: type=0, attr=0xf, range=[0x00000000daa22000-0x00000000daa9b000) (0MB) [ 0.000000] EFI: mem48: type=0, attr=0xf, range=[0x00000000daa9b000-0x00000000daa9c000) (0MB) [ 0.000000] EFI: mem49: type=0, attr=0xf, range=[0x00000000daa9c000-0x00000000daa9f000) (0MB) [ 0.000000] EFI: mem50: type=10, attr=0xf, range=[0x00000000daa9f000-0x00000000daadd000) (0MB) [ 0.000000] EFI: mem51: type=10, attr=0xf, range=[0x00000000daadd000-0x00000000dab9f000) (0MB) [ 0.000000] EFI: mem52: type=9, attr=0xf, range=[0x00000000dab9f000-0x00000000dabdc000) (0MB) [ 0.000000] EFI: mem53: type=9, attr=0xf, range=[0x00000000dabdc000-0x00000000dabff000) (0MB) [ 0.000000] EFI: mem54: type=4, attr=0xf, range=[0x00000000dabff000-0x00000000dac00000) (0MB) [ 0.000000] EFI: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000021e600000) (4582MB) [ 0.000000] EFI: mem56: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) [ 0.000000] EFI: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] ACPI: UEFI 00000000dabde000 0003E (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dabdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dabdc000 00292 (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.795807] fb0: EFI VGA frame buffer device [ 1.057243] EFI Variables Facility v0.08 2004-May-17 [ 9.122104] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver ReadEFI: /dev/sda , N 128 , 0 , , PRStart 1024 , PRSize 128 WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== PARTITIONS & DISKS: sda4 : sda, not-sepboot, grubenv-ok grub2, grub-efi, update-grub, 64, with-boot, is-os, gpt-but-not-EFI, fstab-has-bad-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, apt-get, grub-install, . sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /mnt/boot-sav/sda3. sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /boot/efi. sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /home. sda : GPT-BIS, GPT, no-BIOS_boot, has-correctEFI, 2048 sectors * 512 bytes =================== PARTED: Model: ATA HITACHI HTS72323 (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 106MB 105MB fat32 EFI system partition boot 2 106MB 240MB 134MB Microsoft reserved partition msftres 3 240MB 87.2GB 87.0GB ntfs Basic data partition 4 87.2GB 169GB 81.9GB ext4 5 169GB 316GB 147GB ext4 6 316GB 320GB 4096MB linux-swap(v1) =================== MOUNT: /dev/sda4 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /boot/efi type vfat (rw) /dev/sda5 on /home type ext4 (rw) gvfs-fuse-daemon on /home/vierlex/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=vierlex) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /sys/block/sda: alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent /dev: agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sg0 shm snapshot snd stderr stdin stdout tpm0 uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 watchdog zero /dev/mapper: control /boot/efi: EFI /boot/efi/EFI: Boot Microsoft ubuntu /boot/efi/efi: Boot Microsoft ubuntu /boot/efi/efi/Boot: bootx64.efi /boot/efi/efi/ubuntu: grubx64.efi WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== DF: Filesystem Type Size Used Avail Use% Mounted on /dev/sda4 ext4 77G 4.1G 69G 6% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 3.9G 152K 3.9G 1% /run/shm /dev/sda1 vfat 96M 18M 79M 19% /boot/efi /dev/sda5 ext4 137G 2.2G 128G 2% /home /dev/sda3 fuseblk 81G 30G 52G 37% /mnt/boot-sav/sda3 =================== FDISK: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf34fe538 Device Boot Start End Blocks Id System /dev/sda1 1 625142447 312571223+ ee GPT =================== Before mainwindow FSCK no PASTEBIN yes WUBI no WINBOOT yes recommendedrepair, purge, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION yes (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) EFI detected. Please check the options. =================== Actions FSCK no PASTEBIN yes WUBI no WINBOOT no bootinfo, nombraction, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION no (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) No change has been performed on your computer. See you soon! internet: connected Thanks for your time and attention. EDIT: additional Info Request =No boot loader is installed in the MBR of /dev/sda. But maybe this is how it is supposed to work? yea this is ok. boot stuff seems to be on a seperate partition, in my case sda1. I'm very new to this UEFI thing too. missing files like bootmgr i don't really have a clue :D but yea, maybe thats how it suppose to be? Instead and whats not shown in the log for some reason: There is additional microsoft bootfiles on sda1 under /efi/microsoft/ [much stuff] I remember also doing some kind of hack to make a UEFI windows 7 usb stick. http://jake.io/b/2011/installing-windows-7-with-uefi-boot-on-an-x220-from-usb/ In short: creating and placing bootx64.efi on the stick so it can be booted in UEFI mode. boot order i decide that in my BIOS. i read somwhere that the thinkpad x220 (essential part of the serial number: 4921 http://www.lenovo.com/shop/americas/content/user_guides/x220_x220i_x220tablet_x220itablet_ug_en.pdf) doesnt really have UEFI interface or something, still, these 2 options are listed with all the other usual devices you can give a boot priority to. Right now it looks like this: Boot Priority Order 1. ubuntu 2. Windows Boot Manager 3. USB FDD 4. USB HDD 5. ATA HDD0 HITACHI [random string]

Read the article

AWStats: Visits from IP address vs Crawlers

- by user3651934

I use AWStats in cPanel to see stats of my website. Under Hosts section I see one IP address that has visited 150 pages. I am not sure if one person would have visited 150 pages using a browser. But if these 150 pages have been visited using a software application, then should not it be listed under Robots/Spider section. So how do I determine if I should block a certain IP address that has visited several hundred pages of my website? Thanks

Read the article

Michael Crump’s notes for 70-563 PRO – Designing and Developing Windows Applications usi

- by mbcrump

TIME TO GO PRO! This is my notes for 70-563 PRO – Designing and Developing Windows Applications using .NET Framework 3.5 I created it using several resources (various certification web sites, msdn, official ms 70-548 book). The reason that I created this review is because a) I am taking the exam. b) MS did not create a book for this exam. Use the(MS 70-548)book. c) To make sure I am familiar with each before the exam. I hope that it provides a good start for your own notes. I hope that someone finds this useful. At least, it will give you a starting point of what to expect to know on the PRO exam. Also, for those wondering, the PRO exam does contains very little code. It is basically all theory. 1. Validation Controls – How to prevent users from entering invalid data on forms. (MaskedTextBox control and RegEx) 2. ServiceController – used to start and control the behavior of existing services. 3. User Feedback (know winforms Status Bar, Tool Tips, Color, Error Provider, Context-Sensitive and Accessibility) 4. Specific (derived) exceptions must be handled before general (base class) exceptions. By moving the exception handling for the base type Exception to after exception handling of ArgumentNullException, all ArgumentNullException thrown by the Helper method will be caught and logged correctly. 5. A heartbeat method is a method exposed by a Web service that allows external applications to check on the status of the service. 6. New users must master key tasks quickly. Giving these tasks context and appropriate detail will help. However, advanced users will demand quicker paths. Shortcuts, accelerators, or toolbar buttons will speed things along for the advanced user. 7. MSBuild uses project files to instruct the build engine what to build and how to build it. MSBuild project files are XML files that adhere to the MSBuild XML schema. The MSBuild project files contain complete file, build action, and dependency information for each individual projects. 8. Evaluating whether or not to fix a bug involves a triage process. You must identify the bug's impact, set the priority, categorize it, and assign a developer. Many times the person doing the triage work will assign the bug to a developer for further investigation. In fact, the workflow for the bug work item inside of Team System supports this step. Developers are often asked to assess the impact of a given bug. This assessment helps the person doing the triage make a decision on how to proceed. When assessing the impact of a bug, you should consider time and resources to fix it, bug risk, and impacts of the bug. 9. In large projects it is generally impossible and unfeasible to fix all bugs because of the impact on schedule and budget. 10. Code reviews should be conducted by a technical lead or a technical peer. 11. Testing Applications 12. WCF Services – application state 13. SQL Server 2005 / 2008 Express Edition – reliable storage of data / Microsoft SQL Server 3.5 Compact Database– used for client computers to retrieve and save data from a shared location. 14. SQL Server 2008 Compact Edition – used for minimum possible memory and can synchronize data with a corporate SQL Server 2008 Database. Supports offline user and minimum dependency on external components. 15. MDI and SDI Forms (specifically IsMDIContainer) 16. GUID – in the case of data warehousing, it is important to define unique keys. 17. Encrypting / Security Data 18. Understanding of Isolated Storage/Proper location to store items 19. LINQ to SQL 20. Multithreaded access 21. ADO.NET Entity Framework model 22. Marshal.ReleaseComObject 23. Common User Interface Layout (ComboBox, ListBox, Listview, MaskedTextBox, TextBox, RichTextBox, SplitContainer, TableLayoutPanel, TabControl) 24. DataSets Class - http://msdn.microsoft.com/en-us/library/system.data.dataset%28VS.71%29.aspx 25. SQL Server 2008 Reporting Services (SSRS) 26. SystemIcons.Shield (Vista UAC) 27. Leverging stored procedures to perform data manipulation for a database schema that can change. 28. DataContext 29. Microsoft Windows Installer Packages, ClickOnce(bootstrapping features), XCopy. 30. Client Application Services – will authenticate users by using the same data source as a ASP.NET web application. 31. SQL Server 2008 Caching 32. StringBuilder 33. Accessibility Guidelines for Windows Applications http://msdn.microsoft.com/en-us/library/ms228004.aspx 34. Logging erros 35. Testing performance related issues. 36. Role Based Security, GenericIdentity and GenericPrincipal 37. System.Net.CookieContainer will store session data for webapps (see isolated storage for winforms) 38. .NET CLR Profiler tool will identify objects that cause performance issues. 39. ADO.NET Synchronization (SyncGroup) 40. Globalization - CultureInfo 41. IDisposable Interface- reports on several questions relating to this. 42. Adding timestamps to determine whether data has changed or not. 43. Converting applications to .NET Framework 3.5 44. MicrosoftReportViewer 45. Composite Controls 46. Windows Vista KNOWN folders. 47. Microsoft Sync Framework 48. TypeConverter -Provides a unified way of converting types of values to other types, as well as for accessing standard values and sub properties. http://msdn.microsoft.com/en-us/library/system.componentmodel.typeconverter.aspx 49. Concurrency control mechanisms The main categories of concurrency control mechanisms are: Optimistic - Delay the checking of whether a transaction meets the isolation rules (e.g., serializability and recoverability) until its end, without blocking any of its (read, write) operations, and then abort a transaction, if the desired rules are violated. Pessimistic - Block operations of a transaction, if they may cause violation of the rules. Semi-optimistic - Block operations in some situations, and do not block in other situations, while delaying rules checking to transaction's end, as done with optimistic. 50. AutoResetEvent 51. Microsoft Messaging Queue (MSMQ) 4.0 52. Bulk imports 53. KeyDown event of controls 54. WPF UI components 55. UI process layer 56. GAC (installing, removing and queuing) 57. Use a local database cache to reduce the network bandwidth used by applications. 58. Sound can easily be annoying and distracting to users, so use it judiciously. Always give users the option to turn sound off. Because a user might have sound off, never convey important information through sound alone.

Read the article

ASP.NET AppDomain–What it is and why it’s important–Part 12 of 52 part series

- by OWScott

AppDomains are a silent mysterious part of ASP.NET and IIS. It’s important for the web administrator to be aware of this building block of ASP.NET so that we can be aware of how changes to the system can affect production sites. While this series is targeted at the IIS and web administrator, this topic is useful for the ASP.NET programmer too. This is week 12 of a 52 week series on various web administration related tasks. Past and future videos can be found here.

Read the article

How To Watch Live Streaming of Oscars 2011 (Academy Awards)

- by Kavitha

The Academy Awards or more popularly known as Oscars for this year will go live on Sunday, February 27, 2011 (8PM ET/5pm PT) at the Kodak Theatre (Hollywood), Los Angeles, California. It’s a star studded event every movie lover wish to follow and watch live. We at Tech Dreams always love to write about live streaming of popular events happening across the globe. Here is our guide to follow Oscars 2011. Oscars 2011 Live Streams Last year we did not have many choices to view the Oscars online. But this year there are plenty of them available from the best of the media power houses APLive Oscars coverage on livestream.com (embedded below) Oscars.com – The Official Web Site of Academy Awards Oscars.org Live Streaming Academy Awards – Official Live Steaming Channel on livestream.com(embedded below) APLive Oscars coverage on Facebook Watch Oscars 2011 On Your iPad / iPhone You can catch Oscars 2011 on your iOS devices – iPhone, iPad and iPods for the time ever using the official oscar’s application. Application cost $0.99 and you can download it from AppStore Websites To View Highlights & Exclusive Clips Of Oscars 2010 If you miss to catch the live streaming of Oscars 2011, here are few sites you can check to view video highlights of the entire event. Few websites like Hulu have access to exclusive moments. Oscar’s Official YouTube Channel Hulu Award Season 2011 coverage Oscar’s 2011 Event Schedule Oscars 2011 will begin at on 27th February Sunday 8PM EST in California. The local time in India will be around 9:30 AM on Monday. Here is list of major cities and the local time at which Oscars 2011 are going to start Date & Time California February 27th, Sunday 20:00 Adelaide February 28th, Monday 14:30 Bangkok February 28th, Monday 11:00 Beijing February 28th, Monday 12:00 Brisbane February 28th, Monday 14:00 Cape Town February 28th, Monday 06:00 Dubai February 28th, Monday 08:00 Frankfurt February 28th, Monday 05:00 Hong Kong February 28th, Monday 12:00 Delhi/Chennai/Mumbai/Kolkata February 28th, Monday 09:30 New York February 27th, Sunday 23:00 Paris February 28th, Monday 05:00 Washington February 27th, Sunday 23:00 London February 28th, Monday 04:00 or more cities visit this link This article titled,How To Watch Live Streaming of Oscars 2011 (Academy Awards), was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff

- by The Geek

Yesterday Microsoft announced the release candidate of Internet Explorer 9, which is very close to the final product. Here’s a screenshot tour of the most interesting new stuff, as well as answers to your questions. The most important question is should you install this version? And the answer is absolutely yes. Even if you don’t use IE, it’s better to have a newer, more secure version on your PC. What’s New Under the Hood in Release Candidate vs Beta? If you want to see the full list of changes with all the original marketing detail, you can read Microsoft’s Beauty of the Web page, but here’s the highlights that you might be interested in. Improved Performance – they’ve made a lot of changes, and it really feels faster, especially when using more intensive web apps like Gmail. Power Consumption Settings – since the JavaScript engine in any browser uses a lot of CPU power, they’ve now integrated it into the power settings, so if you’re on battery it will use less CPU, and save battery life. This is really a great change. UI Changes – The tab bar can now be moved below the address bar (see below for more), they’ve shaved some pixels off the design to save space, and now you can toggle the Menu bar to be always on. Pinned Sites – now you can pin multiple pages to a single taskbar button. Very useful if you always use a couple web apps together. You can also pin a site in InPrivate mode. FlashBlock and AdBlock are Integrated (sorta) – there’s a new ActiveX filtering that lets you enable plug-ins only for sites you trust. There’s also a tracking protection list that can block certain content (which can obviously be used to block ads). Geolocation – while a lot of privacy conscious people might complain about this, if you use your laptop while traveling, it’s really useful to have geo-located features when using Google Maps, etc. Don’t worry, it won’t leak your privacy by default. WebM Video – Yeah, Google recently removed H.264 from Chrome, but Microsoft has added Google’s WebM video format to Internet Explorer. Keep reading for more about using the new features Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines The 50 Faces of Mario Death [Infographic] Clean Up Google Calendar’s Interface in Chrome and Iron The Rise and Fall of Kramerica? [Seinfeld Video] GNOME Shell 3 Live CDs for OpenSUSE and Fedora Available for Testing Picplz Offers Special FX, Sharing, and Backup of Your Smartphone Pics BUILD! An Epic LEGO Stop Motion Film [VIDEO]

Read the article

Microsoft SQL Server High-Availability Videos and Q&A Log

- by KKline

You Want Videos? We Got Videos! I always enjoy getting the chance to catch up with author, consultant, and Microsoft Clustering MVP Allan Hirt . Allan and I recently presented two sessions covering an overview of high availability in Microsoft SQL Server and, the following week, a demo of how to implement several different kinds of high availability techniques including database mirroring, transactional replication, and Windows clustering services. You can see videos of these presentations at the...(read more)

Read the article

WLS MBeans

- by Jani Rautiainen

WLS provides a set of Managed Beans (MBeans) to configure, monitor and manage WLS resources. We can use the WLS MBeans to automate some of the tasks related to the configuration and maintenance of the WLS instance. The MBeans can be accessed a number of ways; using various UIs and programmatically using Java or WLST Python scripts.For customization development we can use the features to e.g. manage the deployed customization in MDS, control logging levels, automate deployment of dependent libraries etc. This article is an introduction on how to access and use the WLS MBeans. The goal is to illustrate the various access methods in a single article; the details of the features are left to the linked documentation.This article covers Windows based environment, steps for Linux would be similar however there would be some differences e.g. on how the file paths are defined. MBeansThe WLS MBeans can be categorized to runtime and configuration MBeans.The Runtime MBeans can be used to access the runtime information about the server and its resources. The data from runtime beans is only available while the server is running. The runtime beans can be used to e.g. check the state of the server or deployment.The Configuration MBeans contain information about the configuration of servers and resources. The configuration of the domain is stored in the config.xml file and the configuration MBeans can be used to access and modify the configuration data. For more information on the WLS MBeans refer to: Understanding WebLogic Server MBeans WLS MBean reference Java Management Extensions (JMX)We can use JMX APIs to access the WLS MBeans. This allows us to create Java programs to configure, monitor, and manage WLS resources. In order to use the WLS MBeans we need to add the following library into the class-path: WL_HOME\lib\wljmxclient.jar Connecting to a WLS MBean server The WLS MBeans are contained in a Mbean server, depending on the requirement we can connect to (MBean Server / JNDI Name): Domain Runtime MBean Server weblogic.management.mbeanservers.domainruntime Runtime MBean Server weblogic.management.mbeanservers.runtime Edit MBean Server weblogic.management.mbeanservers.edit To connect to the WLS MBean server first we need to create a map containing the credentials; Hashtable<String, String> param = new Hashtable<String, String>(); param.put(Context.SECURITY_PRINCIPAL, "weblogic"); param.put(Context.SECURITY_CREDENTIALS, "weblogic1"); param.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote"); These define the user, password and package containing the protocol. Next we create the connection: JMXServiceURL serviceURL = new JMXServiceURL("t3","127.0.0.1",7101, "/jndi/weblogic.management.mbeanservers.domainruntime"); JMXConnector connector = JMXConnectorFactory.connect(serviceURL, param); MBeanServerConnection connection = connector.getMBeanServerConnection(); With the connection we can now access the MBeans for the WLS instance. For a complete example see Appendix A of this post. For more details refer to Accessing WebLogic Server MBeans with JMX Accessing WLS MBeans The WLS MBeans are structured hierarchically; in order to access content we need to know the path to the MBean we are interested in. The MBean is accessed using “MBeanServerConnection. getAttribute” API. WLS provides entry points to the hierarchy allowing us to navigate all the WLS MBeans in the hierarchy (MBean Server / JMX object name): Domain Runtime MBean Server com.bea:Name=DomainRuntimeService,Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean Runtime MBean Servers com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean Edit MBean Server com.bea:Name=EditService,Type=weblogic.management.mbeanservers.edit.EditServiceMBean For example we can access the Domain Runtime MBean using: ObjectName service = new ObjectName( "com.bea:Name=DomainRuntimeService," + "Type=weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean"); Same syntax works for any “child” WLS MBeans e.g. to find out all application deployments we can: ObjectName domainConfig = (ObjectName)connection.getAttribute(service,"DomainConfiguration"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig,"AppDeployments"); Alternatively we could access the same MBean using the full syntax: ObjectName domainConfig = new ObjectName("com.bea:Location=DefaultDomain,Name=DefaultDomain,Type=Domain"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig,"AppDeployments"); For more details refer to Accessing WebLogic Server MBeans with JMX Invoking operations on WLS MBeans The WLS MBean operations can be invoked with MBeanServerConnection. invoke API; in the following example we query the state of “AppsLoggerService” application: ObjectName appRuntimeStateRuntime = new ObjectName("com.bea:Name=AppRuntimeStateRuntime,Type=AppRuntimeStateRuntime"); Object[] parameters = { "AppsLoggerService", "DefaultServer" }; String[] signature = { "java.lang.String", "java.lang.String" }; String result = (String)connection.invoke(appRuntimeStateRuntime,"getCurrentState",parameters, signature); The result returned should be "STATE_ACTIVE" assuming the "AppsLoggerService" application is up and running. WebLogic Scripting Tool (WLST) The WebLogic Scripting Tool (WLST) is a command-line scripting environment that we can access the same WLS MBeans. The tool is located under: $MW_HOME\oracle_common\common\bin\wlst.bat Do note that there are several instances of the wlst script under the $MW_HOME, each of them works, however the commands available vary, so we want to use the one under “oracle_common”. The tool is started in offline mode. In offline mode we can access and manipulate the domain configuration. In online mode we can access the runtime information. We connect to the Administration Server : connect("weblogic","weblogic1", "t3://127.0.0.1:7101") In both online and offline modes we can navigate the WLS MBean using commands like "ls" to print content and "cd" to navigate between objects, for example: All the commands available can be obtained with: help('all') For details of the tool refer to WebLogic Scripting Tool and for the commands available WLST Command and Variable Reference. Also do note that the WLST tool can be invoked from Java code in Embedded Mode. Running Scripts The WLST tool allows us to automate tasks using Python scripts in Script Mode. The script can be manually created or recorded by the WLST tool. Example commands of recording a script: startRecording("c:/temp/recording.py") <commands that we want to record> stopRecording() We can run the script from WLST: execfile("c:/temp/recording.py") We can also run the script from the command line: C:\apps\Oracle\Middleware\oracle_common\common\bin\wlst.cmd c:/temp/recording.py There are various sample scripts are provided with the WLS instance. UI to Access the WLS MBeans There are various UIs through which we can access the WLS MBeans. Oracle Enterprise Manager Fusion Middleware Control Oracle WebLogic Server Administration Console Fusion Middleware Control MBean Browser In the integrated JDeveloper environment only the Oracle WebLogic Server Administration Console is available to us. For more information refer to the documentation, one noteworthy feature in the console is the ability to record WLST scripts based on the navigation. In addition to the UIs above the JConsole included in the JDK can be used to access the WLS MBeans. The JConsole needs to be started with specific parameter to force WLS objects to be used and jar files in the classpath: "C:\apps\Oracle\Middleware\jdk160_24\bin\jconsole" -J-Djava.class.path=C:\apps\Oracle\Middleware\jdk160_24\lib\jconsole.jar;C:\apps\Oracle\Middleware\jdk160_24\lib\tools.jar;C:\apps\Oracle\Middleware\wlserver_10.3\server\lib\wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote For more details refer to the Accessing Custom MBeans from JConsole. Summary In this article we have covered various ways we can access and use the WLS MBeans in context of integrated WLS in JDeveloper to be used for Fusion Application customization development. References Developing Custom Management Utilities With JMX for Oracle WebLogic Server Accessing WebLogic Server MBeans with JMX WebLogic Server MBean Reference WebLogic Scripting Tool WLST Command and Variable Reference Appendix A package oracle.apps.test; import java.io.IOException;import java.net.MalformedURLException;import java.util.Hashtable;import javax.management.MBeanServerConnection;import javax.management.MalformedObjectNameException;import javax.management.ObjectName;import javax.management.remote.JMXConnector;import javax.management.remote.JMXConnectorFactory;import javax.management.remote.JMXServiceURL;import javax.naming.Context;/** * This class contains simple examples on how to access WLS MBeans using JMX. */public class BlogExample { /** * Connection to the WLS MBeans */ private MBeanServerConnection connection; /** * Constructor that takes in the connection information for the * domain and obtains the resources from WLS MBeans using JMX. * @param hostName host name to connect to for the WLS server * @param port port to connect to for the WLS server * @param userName user name to connect to for the WLS server * @param password password to connect to for the WLS server */ public BlogExample(String hostName, String port, String userName, String password) { super(); try { initConnection(hostName, port, userName, password); } catch (Exception e) { throw new RuntimeException("Unable to connect to the domain " + hostName + ":" + port); } } /** * Default constructor. * Tries to create connection with default values. Runtime exception will be * thrown if the default values are not used in the local instance. */ public BlogExample() { this("127.0.0.1", "7101", "weblogic", "weblogic1"); } /** * Initializes the JMX connection to the WLS Beans * @param hostName host name to connect to for the WLS server * @param port port to connect to for the WLS server * @param userName user name to connect to for the WLS server * @param password password to connect to for the WLS server * @throws IOException error connecting to the WLS MBeans * @throws MalformedURLException error connecting to the WLS MBeans * @throws MalformedObjectNameException error connecting to the WLS MBeans */ private void initConnection(String hostName, String port, String userName, String password) throws IOException, MalformedURLException, MalformedObjectNameException { String protocol = "t3"; String jndiroot = "/jndi/"; String mserver = "weblogic.management.mbeanservers.domainruntime"; JMXServiceURL serviceURL = new JMXServiceURL(protocol, hostName, Integer.valueOf(port), jndiroot + mserver); Hashtable<String, String> h = new Hashtable<String, String>(); h.put(Context.SECURITY_PRINCIPAL, userName); h.put(Context.SECURITY_CREDENTIALS, password); h.put(JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote"); JMXConnector connector = JMXConnectorFactory.connect(serviceURL, h); connection = connector.getMBeanServerConnection(); } /** * Main method used to invoke the logic for testing * @param args arguments passed to the program */ public static void main(String[] args) { BlogExample blogExample = new BlogExample(); blogExample.testEntryPoint(); blogExample.testDirectAccess(); blogExample.testInvokeOperation(); } /** * Example of using an entry point to navigate the WLS MBean hierarchy. */ public void testEntryPoint() { try { System.out.println("testEntryPoint"); ObjectName service = new ObjectName("com.bea:Name=DomainRuntimeService,Type=" +"weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean"); ObjectName domainConfig = (ObjectName)connection.getAttribute(service, "DomainConfiguration"); ObjectName[] appDeployments = (ObjectName[])connection.getAttribute(domainConfig, "AppDeployments"); for (ObjectName appDeployment : appDeployments) { String resourceIdentifier = (String)connection.getAttribute(appDeployment, "SourcePath"); System.out.println(resourceIdentifier); } } catch (Exception e) { throw new RuntimeException(e); } } /** * Example of accessing WLS MBean directly with a full reference. * This does the same thing as testEntryPoint in slightly difference way. */ public void testDirectAccess() { try { System.out.println("testDirectAccess"); ObjectName appDeployment = new ObjectName("com.bea:Location=DefaultDomain,"+ "Name=AppsLoggerService,Type=AppDeployment"); String resourceIdentifier = (String)connection.getAttribute(appDeployment, "SourcePath"); System.out.println(resourceIdentifier); } catch (Exception e) { throw new RuntimeException(e); } } /** * Example of invoking operation on a WLS MBean. */ public void testInvokeOperation() { try { System.out.println("testInvokeOperation"); ObjectName appRuntimeStateRuntime = new ObjectName("com.bea:Name=AppRuntimeStateRuntime,"+ "Type=AppRuntimeStateRuntime"); String identifier = "AppsLoggerService"; String serverName = "DefaultServer"; Object[] parameters = { identifier, serverName }; String[] signature = { "java.lang.String", "java.lang.String" }; String result = (String)connection.invoke(appRuntimeStateRuntime, "getCurrentState", parameters, signature); System.out.println("State of " + identifier + " = " + result); } catch (Exception e) { throw new RuntimeException(e); } }}

Read the article

Syncing Data with a Server using Silverlight and HTTP Polling Duplex

- by dwahlin

Many applications have the need to stay in-sync with data provided by a service. Although web applications typically rely on standard polling techniques to check if data has changed, Silverlight provides several interesting options for keeping an application in-sync that rely on server “push” technologies. A few years back I wrote several blog posts covering different “push” technologies available in Silverlight that rely on sockets or HTTP Polling Duplex. We recently had a project that looked like it could benefit from pushing data from a server to one or more clients so I thought I’d revisit the subject and provide some updates to the original code posted. If you’ve worked with AJAX before in Web applications then you know that until browsers fully support web sockets or other duplex (bi-directional communication) technologies that it’s difficult to keep applications in-sync with a server without relying on polling. The problem with polling is that you have to check for changes on the server on a timed-basis which can often be wasteful and take up unnecessary resources. With server “push” technologies, data can be pushed from the server to the client as it changes. Once the data is received, the client can update the user interface as appropriate. Using “push” technologies allows the client to listen for changes from the data but stay 100% focused on client activities as opposed to worrying about polling and asking the server if anything has changed. Silverlight provides several options for pushing data from a server to a client including sockets, TCP bindings and HTTP Polling Duplex. Each has its own strengths and weaknesses as far as performance and setup work with HTTP Polling Duplex arguably being the easiest to setup and get going. In this article I’ll demonstrate how HTTP Polling Duplex can be used in Silverlight 4 applications to push data and show how you can create a WCF server that provides an HTTP Polling Duplex binding that a Silverlight client can consume. What is HTTP Polling Duplex? Technologies that allow data to be pushed from a server to a client rely on duplex functionality. Duplex (or bi-directional) communication allows data to be passed in both directions. A client can call a service and the server can call the client. HTTP Polling Duplex (as its name implies) allows a server to communicate with a client without forcing the client to constantly poll the server. It has the benefit of being able to run on port 80 making setup a breeze compared to the other options which require specific ports to be used and cross-domain policy files to be exposed on port 943 (as with sockets and TCP bindings). Having said that, if you’re looking for the best speed possible then sockets and TCP bindings are the way to go. But, they’re not the only game in town when it comes to duplex communication. The first time I heard about HTTP Polling Duplex (initially available in Silverlight 2) I wasn’t exactly sure how it was any better than standard polling used in AJAX applications. I read the Silverlight SDK, looked at various resources and generally found the following definition unhelpful as far as understanding the actual benefits that HTTP Polling Duplex provided: "The Silverlight client periodically polls the service on the network layer, and checks for any new messages that the service wants to send on the callback channel. The service queues all messages sent on the client callback channel and delivers them to the client when the client polls the service." Although the previous definition explained the overall process, it sounded as if standard polling was used. Fortunately, Microsoft’s Scott Guthrie provided me with a more clear definition several years back that explains the benefits provided by HTTP Polling Duplex quite well (used with his permission): "The [HTTP Polling Duplex] duplex support does use polling in the background to implement notifications – although the way it does it is different than manual polling. It initiates a network request, and then the request is effectively “put to sleep” waiting for the server to respond (it doesn’t come back immediately). The server then keeps the connection open but not active until it has something to send back (or the connection times out after 90 seconds – at which point the duplex client will connect again and wait). This way you are avoiding hitting the server repeatedly – but still get an immediate response when there is data to send." After hearing Scott’s definition the light bulb went on and it all made sense. A client makes a request to a server to check for changes, but instead of the request returning immediately, it parks itself on the server and waits for data. It’s kind of like waiting to pick up a pizza at the store. Instead of calling the store over and over to check the status, you sit in the store and wait until the pizza (the request data) is ready. Once it’s ready you take it back home (to the client). This technique provides a lot of efficiency gains over standard polling techniques even though it does use some polling of its own as a request is initially made from a client to a server. So how do you implement HTTP Polling Duplex in your Silverlight applications? Let’s take a look at the process by starting with the server. Creating an HTTP Polling Duplex WCF Service Creating a WCF service that exposes an HTTP Polling Duplex binding is straightforward as far as coding goes. Add some one way operations into an interface, create a client callback interface and you’re ready to go. The most challenging part comes into play when configuring the service to properly support the necessary binding and that’s more of a cut and paste operation once you know the configuration code to use. To create an HTTP Polling Duplex service you’ll need to expose server-side and client-side interfaces and reference the System.ServiceModel.PollingDuplex assembly (located at C:\Program Files (x86)\Microsoft SDKs\Silverlight\v4.0\Libraries\Server on my machine) in the server project. For the demo application I upgraded a basketball simulation service to support the latest polling duplex assemblies. The service simulates a simple basketball game using a Game class and pushes information about the game such as score, fouls, shots and more to the client as the game changes over time. Before jumping too far into the game push service, it’s important to discuss two interfaces used by the service to communicate in a bi-directional manner. The first is called IGameStreamService and defines the methods/operations that the client can call on the server (see Listing 1). The second is IGameStreamClient which defines the callback methods that a server can use to communicate with a client (see Listing 2). [ServiceContract(Namespace = "Silverlight", CallbackContract = typeof(IGameStreamClient))] public interface IGameStreamService { [OperationContract(IsOneWay = true)] void GetTeamData(); } Listing 1. The IGameStreamService interface defines server operations that can be called on the server. [ServiceContract] public interface IGameStreamClient { [OperationContract(IsOneWay = true)] void ReceiveTeamData(List<Team> teamData); [OperationContract(IsOneWay = true, AsyncPattern=true)] IAsyncResult BeginReceiveGameData(GameData gameData, AsyncCallback callback, object state); void EndReceiveGameData(IAsyncResult result); } Listing 2. The IGameStreamClient interfaces defines client operations that a server can call. The IGameStreamService interface is decorated with the standard ServiceContract attribute but also contains a value for the CallbackContract property. This property is used to define the interface that the client will expose (IGameStreamClient in this example) and use to receive data pushed from the service. Notice that each OperationContract attribute in both interfaces sets the IsOneWay property to true. This means that the operation can be called and passed data as appropriate, however, no data will be passed back. Instead, data will be pushed back to the client as it’s available. Looking through the IGameStreamService interface you can see that the client can request team data whereas the IGameStreamClient interface allows team and game data to be received by the client. One interesting point about the IGameStreamClient interface is the inclusion of the AsyncPattern property on the BeginReceiveGameData operation. I initially created this operation as a standard one way operation and it worked most of the time. However, as I disconnected clients and reconnected new ones game data wasn’t being passed properly. After researching the problem more I realized that because the service could take up to 7 seconds to return game data, things were getting hung up. By setting the AsyncPattern property to true on the BeginReceivedGameData operation and providing a corresponding EndReceiveGameData operation I was able to get around this problem and get everything running properly. I’ll provide more details on the implementation of these two methods later in this post. Once the interfaces were created I moved on to the game service class. The first order of business was to create a class that implemented the IGameStreamService interface. Since the service can be used by multiple clients wanting game data I added the ServiceBehavior attribute to the class definition so that I could set its InstanceContextMode to InstanceContextMode.Single (in effect creating a Singleton service object). Listing 3 shows the game service class as well as its fields and constructor. [ServiceBehavior(ConcurrencyMode = ConcurrencyMode.Multiple, InstanceContextMode = InstanceContextMode.Single)] public class GameStreamService : IGameStreamService { object _Key = new object(); Game _Game = null; Timer _Timer = null; Random _Random = null; Dictionary<string, IGameStreamClient> _ClientCallbacks = new Dictionary<string, IGameStreamClient>(); static AsyncCallback _ReceiveGameDataCompleted = new AsyncCallback(ReceiveGameDataCompleted); public GameStreamService() { _Game = new Game(); _Timer = new Timer { Enabled = false, Interval = 2000, AutoReset = true }; _Timer.Elapsed += new ElapsedEventHandler(_Timer_Elapsed); _Timer.Start(); _Random = new Random(); }} Listing 3. The GameStreamService implements the IGameStreamService interface which defines a callback contract that allows the service class to push data back to the client. By implementing the IGameStreamService interface, GameStreamService must supply a GetTeamData() method which is responsible for supplying information about the teams that are playing as well as individual players. GetTeamData() also acts as a client subscription method that tracks clients wanting to receive game data. Listing 4 shows the GetTeamData() method. public void GetTeamData() { //Get client callback channel var context = OperationContext.Current; var sessionID = context.SessionId; var currClient = context.GetCallbackChannel<IGameStreamClient>(); context.Channel.Faulted += Disconnect; context.Channel.Closed += Disconnect; IGameStreamClient client; if (!_ClientCallbacks.TryGetValue(sessionID, out client)) { lock (_Key) { _ClientCallbacks[sessionID] = currClient; } } currClient.ReceiveTeamData(_Game.GetTeamData()); //Start timer which when fired sends updated score information to client if (!_Timer.Enabled) { _Timer.Enabled = true; } } Listing 4. The GetTeamData() method subscribes a given client to the game service and returns. The key the line of code in the GetTeamData() method is the call to GetCallbackChannel<IGameStreamClient>(). This method is responsible for accessing the calling client’s callback channel. The callback channel is defined by the IGameStreamClient interface shown earlier in Listing 2 and used by the server to communicate with the client. Before passing team data back to the client, GetTeamData() grabs the client’s session ID and checks if it already exists in the _ClientCallbacks dictionary object used to track clients wanting callbacks from the server. If the client doesn’t exist it adds it into the collection. It then pushes team data from the Game class back to the client by calling ReceiveTeamData(). Since the service simulates a basketball game, a timer is then started if it’s not already enabled which is then used to randomly send data to the client. When the timer fires, game data is pushed down to the client. Listing 5 shows the _Timer_Elapsed() method that is called when the timer fires as well as the SendGameData() method used to send data to the client. void _Timer_Elapsed(object sender, ElapsedEventArgs e) { int interval = _Random.Next(3000, 7000); lock (_Key) { _Timer.Interval = interval; _Timer.Enabled = false; } SendGameData(_Game.GetGameData()); } private void SendGameData(GameData gameData) { var cbs = _ClientCallbacks.Where(cb => ((IContextChannel)cb.Value).State == CommunicationState.Opened); for (int i = 0; i < cbs.Count(); i++) { var cb = cbs.ElementAt(i).Value; try { cb.BeginReceiveGameData(gameData, _ReceiveGameDataCompleted, cb); } catch (TimeoutException texp) { //Log timeout error } catch (CommunicationException cexp) { //Log communication error } } lock (_Key) _Timer.Enabled = true; } private static void ReceiveGameDataCompleted(IAsyncResult result) { try { ((IGameStreamClient)(result.AsyncState)).EndReceiveGameData(result); } catch (CommunicationException) { // empty } catch (TimeoutException) { // empty } } LIsting 5. _Timer_Elapsed is used to simulate time in a basketball game. When _Timer_Elapsed() fires the SendGameData() method is called which iterates through the clients wanting to be notified of changes. As each client is identified, their respective BeginReceiveGameData() method is called which ultimately pushes game data down to the client. Recall that this method was defined in the client callback interface named IGameStreamClient shown earlier in Listing 2. Notice that BeginReceiveGameData() accepts _ReceiveGameDataCompleted as its second parameter (an AsyncCallback delegate defined in the service class) and passes the client callback as the third parameter. The initial version of the sample application had a standard ReceiveGameData() method in the client callback interface. However, sometimes the client callbacks would work properly and sometimes they wouldn’t which was a little baffling at first glance. After some investigation I realized that I needed to implement an asynchronous pattern for client callbacks to work properly since 3 – 7 second delays are occurring as a result of the timer. Once I added the BeginReceiveGameData() and ReceiveGameDataCompleted() methods everything worked properly since each call was handled in an asynchronous manner. The final task that had to be completed to get the server working properly with HTTP Polling Duplex was adding configuration code into web.config. In the interest of brevity I won’t post all of the code here since the sample application includes everything you need. However, Listing 6 shows the key configuration code to handle creating a custom binding named pollingDuplexBinding and associate it with the service’s endpoint. <bindings> <customBinding> <binding name="pollingDuplexBinding"> <binaryMessageEncoding /> <pollingDuplex maxPendingSessions="2147483647" maxPendingMessagesPerSession="2147483647" inactivityTimeout="02:00:00" serverPollTimeout="00:05:00"/> <httpTransport /> </binding> </customBinding> </bindings> <services> <service name="GameService.GameStreamService" behaviorConfiguration="GameStreamServiceBehavior"> <endpoint address="" binding="customBinding" bindingConfiguration="pollingDuplexBinding" contract="GameService.IGameStreamService"/> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> Listing 6. Configuring an HTTP Polling Duplex binding in web.config and associating an endpoint with it. Calling the Service and Receiving “Pushed” Data Calling the service and handling data that is pushed from the server is a simple and straightforward process in Silverlight. Since the service is configured with a MEX endpoint and exposes a WSDL file, you can right-click on the Silverlight project and select the standard Add Service Reference item. After the web service proxy is created you may notice that the ServiceReferences.ClientConfig file only contains an empty configuration element instead of the normal configuration elements created when creating a standard WCF proxy. You can certainly update the file if you want to read from it at runtime but for the sample application I fed the service URI directly to the service proxy as shown next: var address = new EndpointAddress("http://localhost.:5661/GameStreamService.svc"); var binding = new PollingDuplexHttpBinding(); _Proxy = new GameStreamServiceClient(binding, address); _Proxy.ReceiveTeamDataReceived += _Proxy_ReceiveTeamDataReceived; _Proxy.ReceiveGameDataReceived += _Proxy_ReceiveGameDataReceived; _Proxy.GetTeamDataAsync(); This code creates the proxy and passes the endpoint address and binding to use to its constructor. It then wires the different receive events to callback methods and calls GetTeamDataAsync(). Calling GetTeamDataAsync() causes the server to store the client in the server-side dictionary collection mentioned earlier so that it can receive data that is pushed. As the server-side timer fires and game data is pushed to the client, the user interface is updated as shown in Listing 7. Listing 8 shows the _Proxy_ReceiveGameDataReceived() method responsible for handling the data and calling UpdateGameData() to process it. Listing 7. The Silverlight interface. Game data is pushed from the server to the client using HTTP Polling Duplex. void _Proxy_ReceiveGameDataReceived(object sender, ReceiveGameDataReceivedEventArgs e) { UpdateGameData(e.gameData); } private void UpdateGameData(GameData gameData) { //Update Score this.tbTeam1Score.Text = gameData.Team1Score.ToString(); this.tbTeam2Score.Text = gameData.Team2Score.ToString(); //Update ball visibility if (gameData.Action != ActionsEnum.Foul) { if (tbTeam1.Text == gameData.TeamOnOffense) { AnimateBall(this.BB1, this.BB2); } else //Team 2 { AnimateBall(this.BB2, this.BB1); } } if (this.lbActions.Items.Count > 9) this.lbActions.Items.Clear(); this.lbActions.Items.Add(gameData.LastAction); if (this.lbActions.Visibility == Visibility.Collapsed) this.lbActions.Visibility = Visibility.Visible; } private void AnimateBall(Image onBall, Image offBall) { this.FadeIn.Stop(); Storyboard.SetTarget(this.FadeInAnimation, onBall); Storyboard.SetTarget(this.FadeOutAnimation, offBall); this.FadeIn.Begin(); } Listing 8. As the server pushes game data, the client’s _Proxy_ReceiveGameDataReceived() method is called to process the data. In a real-life application I’d go with a ViewModel class to handle retrieving team data, setup data bindings and handle data that is pushed from the server. However, for the sample application I wanted to focus on HTTP Polling Duplex and keep things as simple as possible. Summary Silverlight supports three options when duplex communication is required in an application including TCP bindins, sockets and HTTP Polling Duplex. In this post you’ve seen how HTTP Polling Duplex interfaces can be created and implemented on the server as well as how they can be consumed by a Silverlight client. HTTP Polling Duplex provides a nice way to “push” data from a server while still allowing the data to flow over port 80 or another port of your choice. Sample Application Download

Read the article

NDC 2010: Eric Evans -What I learned since the book

This was one of the most rewarding sessions for me. Eric Evans explained what he picked up and learned since he wrote the book, what parts that he realized was more important that he initially thought and what parts had been missing. A missing building block: Domain Events [...]...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

How to Make a Steve Jobs Cheese Head

<b>Serious Eats:</b> "Carve Steve's head out of a block of mozzerella, add some black pepper for hair, stick on a pair of glasses, and you've got the perfect centerpiece for your iPad launch party."

Read the article

Silverlight Cream for February 23, 2011 -- #1051

- by Dave Campbell

In this Issue: Ian T. Lackey, Kevin Hoffman, Kunal Chowdhury, Jesse Liberty(-2-), Page Brooks, Deborah Kurata(-2-), and Paul Sheriff. Above the Fold: Silverlight: "Building a Radar Control in Silverlight–Part 2" Page Brooks WP7: "Reactive Drag and Drop Part 2" Jesse Liberty Expression Blend: "Simple RadioButtonList and / or CheckBoxList in Silverlight Using a Behavior" Ian T. Lackey Shoutouts: Kunal Chowdhury delivered a full day session on Silverlight at the Microsoft Imagine Cup Championship event in Mumbai... you can Download Microsoft Imagine Cup Session PPT on Silverlight Dennis Doomen has appeared in my blog any number of times... he's looking for some assistance: Get me on stage on the Developer Days 2011 Steve Wortham posted An Interview with Jeff Wilcox From SilverlightCream.com: Simple RadioButtonList and / or CheckBoxList in Silverlight Using a Behavior Ian T. Lackey bemoans the lack of a RadioButtonList or CheckBoxList, and jumps into Blend to show us how to make one using a behavior... and the code is available too! WP7 for iPhone and Android Developers - Introduction to XAML and Silverlight Continuing his series at SilvelightShow for iPhone and Android devs, Kevin Hoffman has part 2 up getting into the UI with an intro to XAML and Silverlight. Day 1: Working with Telerik Silverlight RadControls Kunal Chowdhury kicked my tires that I had missed his Telerik control series... He's detailing his experience getting up to speed with the Silverlight RadControls. Day 1 is intro, what there is, installing, stuff like that. Part 2 continues: Day 2: Working with BusyIndicator of Telerik Silverlight RadControls, followed (so far) by part 3: Day 3: Working with Masked TextBox of Telerik Silverlight RadControls Reactive Drag and Drop Part 2 Jesse Liberty has his 7th part about Rx up ... and the 2nd part of Reactive Drag and Drop, and oh yeah... it's for WP7 as well! Yet Another Podcast #25–Glenn Block / WCF Next Jesse Liberty has Glenn Block on stage for his Yet Another Podcast number 25... talking WCF with Glenn. Building a Radar Control in Silverlight–Part 2 Page Brooks has part 2 of his 'radar' control for Silverlight up... I don't know where I'd use this, but it's darned cool... and the live demo is amazing. Silverlight Charting: Setting Colors Deborah Kurata is looking at the charting controls now, and how to set colors. She begins with a previous post on charts and adds color definitions to that post. Silverlight Charting: Setting the Tooltip Deborah Kurata next gets into formatting the tooltip you can get when the user hovers over a chart to make it make more sense to your user 'Content' is NOT 'Text' in XAML Paul Sheriff discusses the Content property of XAML controls and how it can be pretty much any other XAML you want it to be, then goes on to show some nice examples. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

CodeStock 2012 Review: Michael Eaton( @mjeaton ) - 3 Simple Things for Increased Productivity

3 Simple Things for Increased ProductivitySpeaker: Michael EatonTwitter: @mjeatonBlog: http://mjeaton.net/blog This was the first time I had seen Michael Eaton speak but have hear a lot of really good things about his speaking abilities. Needless to say I was really looking forward to his session. He basically addressed the topic of distractions and how they can decrease or increase your productivity as a developer. He makes the case that in order to become more productive you must block/limit all distractions. For example, he covered his top distractions as a developer. Top Distractions Social Media(Twitter, Reddit, Facebook) Wiki sites Phone Email Video Games Coworkers, Friends, Family Michael stated that he uses various types of music to help him block out these distractions in order for him to get into his coding zone. While he states that music works for him, he also notes that he knows of others that cannot really work with music. I have to say I am in the latter group because I require a quiet environment in order to work. A few session attendees also recommended listening to really loud white noise or music in another language other than your own. This allows for less focus to be placed on words being sung compared to the rhythmic beats being played. I have to say that I have not tried these suggestions yet but will in the near future. However, distractions can be very beneficial to productivity in that they give your mind a chance to relax and not think about the issues at hand. He spoke highly of taking vacations, and setting boundaries at work so that develops prevent the problem of burnout. One way he suggested that developer’s combat distractions is to use the Pomodoro technique. In his example he selects one task to do for 20 minutes and he can only do that task during that time. He ignores all other distractions until this task or time limit is complete. After it is completed he allows himself to relax and distract himself for another 5- 10 minutes before his next Pomodoro. This allows him to stay completely focused on a task and when the time is up he can then focus on other things.

Read the article

Type of Blobs

- by kaleidoscope

With the release of Windows Azure November 2009 CTP, now we have two types of blobs. Block Blob - This blob type is in place since PDC 2008 and is optimized for streaming workloads. [Max Size allowed : 200GB] Page Blob - With November 2009 CTP release, a new blob type is added which is optimized for random read / writes called Page Blob. [Max Size allowed : 1TB] More details can be found at: http://geekswithblogs.net/IUnknown/archive/2009/11/16/azure-november-ctp-announced.aspx Amit, S

Read the article

It's the End of the Life as We Know It and Linux Feels Fine

<b>IT World:</b> "Since we live in an entropic universe, things end. Heady stuff for a Monday morning, I will admit, but just keep drinking that coffee, you'll catch up."

Read the article

can't mount ntfs partition without root access

- by tachyons

whenever try to mount ntfs partition it says Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at http://tuxera.com/community/ntfs-3g-faq/#unprivileged I tried this answer but it wont work

Read the article

Visio Architecture Diagram [closed]

- by Mike

I am using Visio to create an architecture diagram similar to the following Windows block diagram: Are there components available in Visio to make a diagram like this? I can do it manually by using the open/closed bar shape from Blocks and then adding the text as textboxes but it means I have to worry about sizing/offsetting text for each black box. Is anyone aware of whether there is some built-in shape already for this?

Read the article

Friendly Purchase Tips - DELL INSPIRON 1501 Laptop AC Adapter

When your Dell inspiron 1501 Series Notebook Power Supply damaged, consider few tips As here Charger consists 2 separate parts, solid block Ac adapter and Power Cable hooks to wall. sometimes it is ... [Author: Shekar Somu - Computers and Internet - March 29, 2010]

Read the article

CodeStock 2012 Review: Michael Eaton( @mjeaton ) - 3 Simple Things for Increased Productivity

3 Simple Things for Increased ProductivitySpeaker: Michael EatonTwitter: @mjeatonBlog: http://mjeaton.net/blog This was the first time I had seen Michael Eaton speak but have hear a lot of really good things about his speaking abilities. Needless to say I was really looking forward to his session. He basically addressed the topic of distractions and how they can decrease or increase your productivity as a developer. He makes the case that in order to become more productive you must block/limit all distractions. For example, he covered his top distractions as a developer. Top Distractions Social Media(Twitter, Reddit, Facebook) Wiki sites Phone Email Video Games Coworkers, Friends, Family Michael stated that he uses various types of music to help him block out these distractions in order for him to get into his coding zone. While he states that music works for him, he also notes that he knows of others that cannot really work with music. I have to say I am in the latter group because I require a quiet environment in order to work. A few session attendees also recommended listening to really loud white noise or music in another language other than your own. This allows for less focus to be placed on words being sung compared to the rhythmic beats being played. I have to say that I have not tried these suggestions yet but will in the near future. However, distractions can be very beneficial to productivity in that they give your mind a chance to relax and not think about the issues at hand. He spoke highly of taking vacations, and setting boundaries at work so that develops prevent the problem of burnout. One way he suggested that developer’s combat distractions is to use the Pomodoro technique. In his example he selects one task to do for 20 minutes and he can only do that task during that time. He ignores all other distractions until this task or time limit is complete. After it is completed he allows himself to relax and distract himself for another 5- 10 minutes before his next Pomodoro. This allows him to stay completely focused on a task and when the time is up he can then focus on other things.

Search Results

Search found 13011 results on 521 pages for 'catch block'.

Page 134/521 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141 | Next Page >

- by Mike Koerner

- by nmarun

- by Reed

- by Maria Colgan

- by Brian Schroer

- by subodhnpushpak

- by 4x10

- by user3651934

- by mbcrump

- by OWScott

- by Kavitha

- by The Geek

- by KKline

- by Jani Rautiainen

- by dwahlin

- by Dave Campbell

- by kaleidoscope

- by tachyons

- by Mike

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141 | Next Page >