Search Results

Search found 16476 results on 660 pages for 'computer repairs'.

Page 134/660 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• Windows 7 - sharing file - slow seek time?

  - by progtick

  I do not want to copy the files. I simply have video files (.flv) on one computer and I would like another computer user to watch them without copying. Playback is fine, but seek time (as in if you move the cursor to skip some portion of the video) takes forever! I thought wireless speed might be the culprit, so I wired the two computer. Maybe I saw some improvement but still so bad. It's 1 Gbps! (I know real speed will vary, but before I monitor real speed and such, do I have reasonable issue? Or am I bound to have very slow seek time?) What is going on? I must mention some of these files are huge!

  Read the article

• My card reader doesn't show up at all, but previously did in 10.10

  - by Nathan J. Brauer

  I bought a pin-based-USB powered internal media card reader and it worked perfectly when I first installed Ubuntu 10.10 a month ago. I used it a few times since and today I booted up the computer and it's not working. Here's how it used to work: In nautilus->computer, 5 "drives" would display even when no card was inserted. One for each slot (SD, XD, CF/MS, etc). Opening one w/o a card would initiate a "Please insert card." dialog. Inserting a card would automatically open nautilus. Now: No drives display at all whether cards are inserted or not. lsusb lists the following (which seems to indicate that it's not being detected) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 046d:c52e Logitech, Inc. (my keyboard/mouse) Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub (A side note, all of my USB ports are 2.0 + 1 USB port which is 3.0, why does everything say 1.1/2.0?) I tried using ubuntu-bug but for USB devices it expects you to be able to remove and insert them while the computer is running -- obviously something you probably shouldn't be doing when you're dealing with devices plugged straight into the USB pins. Thanks in advance!

  Read the article

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• SQLAuthority News – Download Whitepaper – Power View Infrastructure Configuration and Installation: Step-by-Step and Scripts

  - by pinaldave

  Power View, a feature of SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint Server 2010 Enterprise Edition, is an interactive data exploration, visualization, and presentation experience. It provides intuitive ad-hoc reporting for business users such as data analysts, business decision makers, and information workers. Microsoft has recently released very interesting whitepaper which covers a sample scenario that validates the connectivity of the Power View reports to both PowerPivot workbooks and tabular models. This white paper talks about following important concepts about Power View: Understanding the hardware and software requirements and their download locations Installing and configuring the required infrastructure when Power View and its data models are on the same computer and on different computer Installing and configuring a computer used for client access to Power View reports, models, Sharepoint 2012 and Power View in a workgroup Configuring single sign-on access for double-hop scenarios with and without Kerberos You can download the whitepaper from here. This whitepaper talks about many interesting scenarios. It would be really interesting to know if you are using Power View in your production environment. If yes, would you please share your experience over here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Business Intelligence, Data Warehousing, PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQL White Papers, T SQL, Technology

  Read the article

• Can not RDP to Win 2003 box or initiate remote restart

  - by Richard West

  I've got a Windows 2003 server that's at my remote data center. This morning I tried to connect to it via RDP, but the connection fails with the following error: This computer can't connect to the remote computer. Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator. I have also trying issuing a remote shutdown/restart command using the "shutdown -i" command from my local system. No error is reported, however the system does not reboot. This server runs SQL Server 2005 and it is still fully operational and responsive to queries. I can also remotely connect to the services control panel of the remote system. Is there anything that I can try to regain control of the system, short of having an operator in the data center do a hard reboot on the server for me?

  Read the article

• Dealing with an Idiot [closed]

  - by inspectorG4dget

  I'm a 4th year University Computer Science student, and I have this problem, that I don't seem to be able to find a straight answer to: As a 4th year computer science student, I spend more time in the computer lab on campus, than even my own home. This means that getting along with everyone else here is very important to me. In most cases, this is not an issue because my interactions with almost all the people here fall into one of the following categories: Let me help you, junior Hi fellow student in a course I'm taking, I'm having trouble with this assignment question. Can you give me a hint as to how you solved it? Hi fellow student in a course I'm taking, This is how I solved the problem that you're stuck on. Hope it helps Hi fellow student, I noticed that you're working on a project, using a library that I'm interested in. Can we setup a time so I can learn about this library from you? This model of interaction works very well for me. However, there is one fellow student, who manages to make my life hell beyond all of this (his name is not important, let's just call him "Sam"). He seems to be always (pardon my crass description) high and completely unwilling to contribute to a constructive, academic conversation. He's a pretty smart guy, but just comes across as (I hate to say something like this about a fellow student, but) an imbecile. He also has ignorant opinions on important topics, some of which pertain to my specialization (AI, NLP, etc), and when I try to explain to him why he's wrong, all he does is insult me and put me in a foul mood. I have tried ignoring him (sitting somewhere else in the lab, headphones, etc), but he seems to like doing this because he approaches me and no amount of "leave me alone" seems to do the trick. Can anyone please suggest to me how to deal with this man in a civil way? Thank you

  Read the article

• Improve my System, Need some advice/suggestion

  - by Pennf0lio

  Processor: 2.40 gigahertz Intel Core2 Duo Board: ASUSTeK Computer INC. P5B-MX Memory: 2 Gb VideoCard: NVIDIA GeForce 7300 GT HDD: 80GB + 250GB both IDE Operating System: Windows 7 32bit Please give me some advice what to improve in my System. I mainly used it for Graphic Design (eg, Photoshop, Cinema4d, Illustrator, Flash). I was planning to increase my Memory adding 2 GB more, Pushing it to something like 4GB in total. But just found out that recently that I already have 2x2GB installed and should be 4GB in total. When I looked at the properties of my computer, It said "Installed Memory 2GB". I wonder why is that happening? Is the other ram broken?.. I never the computer casing since I bought. so I didn't realize that I already have 2 x 2gb ram. what can you advice. Thanks!

  Read the article

• Failure to Boot 12.04 on HP AMD Dual Core. Rescue Mode doesn't even come up

  - by L R Bellmore Jr

  I have 12.04 installed on HP 64 bit dual core AMD laptop.. worked great until about 1-2 months ago.. now takes 1/2 hour to 25 hours to boot if it ever does. A minor number of times I get the HP logo with hash lines on screen and it just hangs... When it finally boots 95% it will run until I turn it off days later to see if any of the upgrades fixed the problem. Currently, if it boots, it is random.. .left on over night .. 2 nights ago and came back to a HP logo with Hash Lines horizontal across the screen.. frozen.. rebooted back to black screen.. no HP logo... Most often when it does boot.. no HP logo.. just cursor shows up.. and then I know it will finally load... computer has been made worthless and it is my work computer..HELP PLEASE... Rescue Mode can't be invoked.. computer doesnt respond.. has shown up 3 times in about 100 and when I have tried it... 1 time it resulted in a boot up but then failed in a couple hours.

  Read the article

• Looking for an easier Skype video chat alternative

  - by Paul

  Is there any software 'easier to use' than Skype - ie to get a video conversation going you have to turn on the computer, make sure the speakers are turned on, make sure the web cam is connected, make sure you click answer with Video... I would like to buy a 'single red button' which does all of the above. - Any recommendations? Update @Eric Koslow comment My original question title was "Is there any software/hardware 'easier to use' than Skype?" So the answer is not necessarily a computer running a program, although it might be. I realise Skype makes a good attempt at helping to ensure speakers and web cam are working and helps you to sort them out if they are not, and for a person who isnt computer phobic this should be enough. However I am interested if there is anything available that is 'easier' than this - ie I'm looking for my 'single' red button. ie the mobile phone with video call maybe the closest answer so far, but I would prefer something as 'free' as Skype is.

  Read the article

• balancing loudest and quietest speaker noises

  - by Dan

  It is hard for me to find the right volume for my computer to watch my dvd's on because it seems like most reasonable volumes become overwhelming at the loudest parts of a movie and it is hard to even make out the dialog at the quietest parts. I find I'm constantly adjusting the volume during the course of a movie. Are there ways to make the difference between the louds and the quiets not so extreme? (both computer related solutions and non-computer related solutions welcome). Like moving my speakers across the room and increasing the volume? or the opposite? Or would would the extremes be less noticeable if I used headphones? Are there movie players that might have more complex sound adjustment features? If there is a software solution out there for linux that would be great too. Thanks, Dan

  Read the article

• Isolate user from the rest of the system..?

  - by Shiki

  There is a non-techsavvy user, who doesn't want to learn, and can only use Windows XP or 7. The problem is, that the computer is shared which she would like to use, and the computer stores sensitive, important data. Since she clicks on everything, it's quite a russian roulette. How could I isolate her account from the rest of the system? Like having a profile on the computer (it runs Windows 7 now) which would have the files and other stuff sandboxed? I was thinking of having a dual boot system, but that could compromise the files too, or the boot sector (talking about Windows). Linux is not a way, hence ... see the first line. Is there such a software that can set up a sandboxed environment?

  Read the article

• Detect damage done by virus

  - by user38471

  Hey, this morning after I went to college a virus infected my pc without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagonosed with was "fakespypro" http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Win32%2fFakeSpypro on a fully updated windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appriciated.

  Read the article

• Windows not booting, bcd corrupt?

  - by Bolaji Ibrahim

  The windows boot configuration data file does not contain a valid OS entry Windows failed to start. A recent hardware or software change might be the case.to fix the problem: 1.Insert your windows installation disc and restart your computer. 2.Choose your language settings, and click "next" . 3.Click "repair your computer." If you do not have this disc, contact your administrator or computer manufacture for assistance. File: \Boot\BCD Status:Oxc0000098 Info :The windows boot configuration data does not contain a valid OS entry.

  Read the article

• Attempting to install netgear N300 Wireless USB Adapter on Ubuntu without a present internet connection

  - by Liz

  Hello Linux/Ubuntu world out there. I don't have internet presently on the desktop I am trying to install the USB wireless adapter on. This seems to be the problem, which if the hardware would work would theoretically fix the problem. I can NOT access the internet via anything but wireless. I am presently on my laptop searching for answers while trying to install this little device. So any advice will have to take that into account. Now I have tried so far, using WINE which does not want to work, I have tried Windows Wireless Drivers which doesn't want to work, I have tried Software Sources, Other Software and it will not acknowledge the cdrom as a repository stating errors like E:Unable to stat the mount point /cdrom/ -stat (2: No such file or directory) However I can open the CD icon on my computer and access and browse the files. The computer can read the CD. I can read the CD. I've tried just plugging it in and seeing if the computer will automatically recognize the hardware, and go from there. That does not work either. I have tested USB port to just verify that the USB port works. It does. My laptop recognizes the hardware, and would easily install the software if I prompted it to. The difference is that my laptop is Vista, and I HATE Vista. Any tips, tricks?

  Read the article

• When connected through a router, a new gateway appears, and I lose my internet connection.

  - by idan315

  I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. (Just to be clear: the computer using Windows XP can connect to the internet without any problem). This entire question is about the PC using Windows 7. The only symptom of this problem is that when I see my network devices, in addition to my router (which appears as "Network 4", or something of the sort), I also see an "Unidentified Network". When using ipconfig to check the problem, I see a second gateway, with the IP 0.0.0.0, in addition to the IP of my router.

  Read the article

• OS Missing? Messed up the MBR on Win7 64-bit

  - by hom3lesshom3boy

  I have a Windows 7 machine with two hard drives: a 1TB C: drive and 500GB J:. I had Windows XP installed on C: and Windows 7 installed on J:. I installed Windows 7 after Windows XP from an installer .exe I (legally) bought and downloaded. It, and all of my other files, are sitting on my J: drive intact. While under my Windows 7 install, a few days ago I decided to use Priform's CCleaner and use its DriveWipe utility to wipe the C: drive. 1% into the process, I cancelled and attempted to use it again. It gives me an error saying it can't format the drive, so I poke around the Internet a bit, give up, and restart my computer. I first get an "OS is missing" error after the computer boots past the BIOS. I downloaded and put UBCD on a bootable USB to use another drivewiping tool to completely erase the C: drive, hoping it'll take the problem with it. No luck. I try to use TestDisk to make my J: my primary active drive, but no luck. I still get the "OS is missing" error. Or sometimes it'll hang at Verifying DMI Pool. Or sometimes I'll get the "NTLDR is missing" error. I get hold of Hiren's and put it on another bootable USB. I first I tried the Boot Windows 7 from Hard Drive option, and I get "Error 15: File Not Found". I tried the "Fix 'NTLDR is Missing'" option (I'm not quite sure why this is even showing up, since I'm trying to get into a HDD with Windows 7 installed. Probably messed up somewhere when I used TestDisk) and I get this list: I'll run through the error messages I get: 1st Try - Windows could not start because the following file is missing or corrupt: \system32\hal.dll 2nd Try - Windows could not start because the following file is missing or corrupt: \system32\ntoskrnl.exe 3rd Try - Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. 4th - 8th Try - Same as #3 9th Try - I/O Error accessing boot sector file multi(0)disk(0)fdisk(0)\BOOTSEC.DOS. And computer freezes. 10th Try - computer restarts Needless to say, not a single one of those works. I then tried to open up the Windows 7 exe I have sitting on my J: from the Mini-XP OS on Hiren's, but it won't run because I'm trying to run a 64-bit file from a 32-bit exe. At least, that's the problem according to these guys: http://social.technet.microsoft.com/...-b2f54e9c7d18/ I then borrowed a 64-bit Windows Home Premium CD from a friend to get to the recovery options. But I get the error message: This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows. I pressed Shift + F10 to get to the Command Prompt directly. These are the exact steps I took from there (paraphrased a little): X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. I restarted my computer, but it still didn't work. I unplugged the C: drive, then tried bootrec and Diskpart: X:\Sources> bootrec.exe X:\Sources> bootrec /RebuildBcd Total identified Windows installations: 1 [1] \\?\GLOBALROOT\Device\HarddiskVolume1\Windows Add installation to bootlist? Yes(Y)/No(N)/All(A):y The requested system device cannot be found. X:\Sources>DiskPart DISKPART> List Disk Disk # Status Size Free Dyn Gpt Disk 0_Online_465GB_0B_______* Disk 1 Online 1000MB 0B (this is Hiren's on a bootable usb) DISKPART> Select Disk 0 Disk 0 is now the selected disk. DISKPART> List Partition Partition # Type Size Offset Partition 1 System 465GB 31KB DISKPART> Select Partition 1 Partition 1 is now the selected partition DISKPART> Active The selected disk is not a fixed MBR disk. The ACTIVE command can only be used on fixed MBR disks. DISKPART> exit Leaving Diskpart... X:\Sources>bootrec /Fixmbr The operation completed successfully. X:\Sources>bootrec /Fixboot The operation completed successfully. Before I go any further, is there anything I'm overlooking/doing wrong? All I care about is making the J: and Windows 7 bootable again. SPECS: Windows 7 Professional 64-Bit GIGABYTE - Motherboard - Socket 775 - GA-P35-DS3R (rev. 2.1) Crucial Ballistix 2048MB PC6400 DDR2 800MHz (2x2GB) Intel Core 2 Duo E6700 Processor (2.6 (6GHZ) I think... not sure anymore C: HDD - SAMSUNG HD103UJ (1TB, not plugged in) J: HDD - WDC WD5000AKS-00V1A0 (500GB)

  Read the article

• Procedure entry point EncodePointer could not be located in kernel32.dll

  - by waanders

  I get this error when trying to run a program on a Windows computer: Because it's a Dutch Windows version it is in Dutch, but in English it would be something like "Procedure entry point EncodePointer could not be located in kernel32.dll". I've been looking for a solution on the net and I think it has something to do with SP's of Windows. This are the system settings: Does this mean I'm not using any Windows XP Service Pack? I'm working on this for someone else, it's an old computer, not connected to the internet. Should I connect the computer to the internet and install all Windows updates to solve the problem? No other solution?

  Read the article

• Webserver on a rotating server with NAT IP or changing IPs

  - by hpsoftware

  i would have to elaborate my questions so please have patience Explaining the logic. if you are familiar with logmein then it installs a client software on your computer then it kinda keeps tracks where you computer is as long as it's connected to internet. So you can always access your computer no matter where it is whatever it's IP is you just go to logmein.com and then you can just access it. Now what i am asking 1. Let's assume i have a website hosted on my laptop let's call it webserver. so then i move around i have a new IP sometime even on a hotel network is it possible to do something like what logmein does so i can keep moving around my Webserver to new IP but it has some local client or something which keeps updating my IP or something i am sure i would need a gateway server somewhere which is connected to my domain name via DNS so somebody accessing my website www.mywebsite.com goes to my main server then gets routed to my laptop which could be anywhere but my gateway server is able to communicate to my webserver I will keep updating the case description based on comments to make more sense. please have patience with me. Regards

  Read the article

• Another Exchange 2003 to Exchange 2010 mail flow issue

  - by Ryan Roussel

  During a migration recently, we came across another internal mail routing issue.  The symptoms were identical to my previous post about Exchange internal mail routing.  Mail was flowing from 2010 to 2003, from 2010 to the internet, but not from 2003 to 2010.   I went through the normal check list looking at permissions, DNS, and the routing group connectors.  I verified that both servers listed in the routing group connectors were the routing master in their respective routing groups through the 2003 ESM.  I also verified that inheritable permissions were enabled for the Exchange 2003 server object in the schema.  No luck with either.   For my previous post about this issue in which inheritable permissions were the culprit: Exchange 2010, Exchange 2003 Mail Flow issue   And for Routing Group issues: Exchange 2007 Routing Group Connector Mayhem   I finally enabled logging on the SMTP virtual server on Exchange 2003 and the Default Receive Connector on 2010 and sent a few test e-mails where I found 2003 was having issues authenticating to 2010.  By default 2003 uses Exchange Server Authentication to communicate to 2010. The exact error was: 4.7.0 Temporary Authentication Failure which was found in the SMTP logs on the Exchange 2003 side   After scouring based on this error, I found the solution:   The Access this computer from the network user rights in the local computer policy on the Exchange 2010 server were changed from the default.  The network administrator had modified the Default Domain policy and changed this user right assignment to only list Domain Users.   The fix was to clear this setting in the Default Domain policy,  force gpupdate to refresh the group policy settings, then ensure the appropriate users and groups were listed.   This immediately fixed the problem and the Exchange 2003 server was able to route mail to the Exchange 2010 mailboxes.   The default user rights assignments for Access this computer from the network On Workstations and Servers: Administrators Backup Operators Power Users Users Everyone On Domain Controllers: Administrators Authenticated Users Everyone More can be found here: http://technet.microsoft.com/en-us/library/cc740196(WS.10).aspx

  Read the article

• Why doesn't my IDE do background compiling/building?

  - by MKO

  Today I develop on a fairly complex computer, it has multiple cores, SSD drives and what not. Still, most of the time I'm programming the computer is leasurely doing nothing. When I need to compile and run/deploy a somewhat complex project at best it still takes a couple of seconds. Why? Now that we're living more and more in the "age of instant" why can't I press F5 in Visual studio and launch/deploy my application instantly? A couple of seconds might not sound so bad but it's still cognitive friction and time that adds up, and frankly it makes programming less fun. So how could compilation be instant? Well, People tend to edit files in different assemblies, what if Visual Studio/The IDE constantly did compilation/and building of everything that I modified anytime that it might be appropriate. Heck if they wanted to go really advanced they could do per-class compilation. The compilation might not work but then it could just silently do nothing (except adding error messages to the error window). Surely todays computer could dedicate a core or two to this task, and if someone found it annoying it could be disabled by option. I know there's probably a thousand technical issues and some fancy shadow copying that would need to be resolved for this to be seamless and practical but it sure would make programming more seamless. Is there any practical reason why this scenario isn't possible? Would the wear and tear of continually writing binaries be too much? Couldn't assemblies be held in memory until deployed/run?

  Read the article

• Program broke my windows. Everything randomly minimizes even after multiple restarts

  - by Xitcod13

  I just installed LoL (league of legends) on my computer. The problem is that almost every time after I play the game, it minimizes all my windows which is really annoying. What is worse however is that afterwards other programs do this as well. In the internet browser doesn't minimize but it does loose focus. For example when i type it randomly looses focus and i have to click on the browser window again to it registers my typing. Is there any way to fix this? What can cause such a strange behavior?? In addition this problem persists even after restarting my computer. I previously thought it was internet driver. I no longer think so this happened right after I started playing the game and seems pretty persistent. Please read the comments for further information. This pretty much renders my computer useless. Even typing this takes a huge effort.

  Read the article

• Detecting damage done by virus

  - by user38471

  This morning after I went to college, a virus infected my PC without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagnosed with was "fakespypro" on a fully updated Windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appreciated.

  Read the article

• Laptop freezes on Wireless Mouse Adapter attach/detach

  - by Sergiy Byelozyorov

  I am using Microsoft Wireless Notebook Optical Mouse 3000 with Toshiba Satellite Pro P300-1CG. Recently I have installed Windows 7 64-bit. Now once in a while when I plug-in or plug-out wireless mouse adapter, the computer freezes (image stays on the screen, but the computer is not responsive). I have noticed that it mostly happens after I recover my computer from sleep mode. To continue using laptop I have to shut it down by pressing and holding power button for 7 seconds and then booting it up again. What can be done to prevent this?

  Read the article

• IP addresses not updating, but showing correctly in the DHCP Address Leases

  - by Bobby

  I first noticed this when I tried a RDP to wxp-38-shop and it connected me to the computer wxp-alvinm As you can see in the picture I pinged wxp-38-shop and it shows a different IP then whats given in the Address Leases page (w2k3 server). I tried to do ipconfig /flushdns on the server as well as the client computer, but it didn't update that way. If I do an ipconfig on wxp-38-shop is also shows 192.168.0.153, so why when I ping it from any other computer why would it be showing the wrong IP?

  Read the article

• Unity3d web player fails to load textures

  - by José Franco

  I'm having a problem with Unity3d Web Player. I have developed a project and succesfully deployed it in a web app. It works with absolutely no problem on my PC. This app is to be installed on two identical machines. I have installed them in both and it only works properly in one. The issue I have is on a computer it fails to properly load the models and textures, so the game runs but instead of the models I can only see black rectangles on a blue background. It has the same problem with all browsers and I get no errors either by the player or by JavaScript. The only difference between these computers is that one that has the problem is running on Windows 8.1 and the other one on Windows 8 only. Could this be the cause of the issue? It works fine on my computer with Windows 8.1. However both of the other computers have specs that are significantly lower than mine. I have already searched everywhere and it seems that it has to do with the individual games, however I think it may have to do with the computer itself because it runs properly in the other two. The specs on the computes I'm installing the app on are as follows: Intel Celeron 1.40 GHz, 2GB RAM, Intel HD Graphics If anybody could point me in the right direction I would be very grateful I forgot to mention, I'm running Unity Web player 4.3.5 and the version on the other two computers is 4.5.0

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >