Search Results

Search found 5185 results on 208 pages for 'crossover office'.

Page 134/208 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• Multiple Subnets on home network... would this work?

  - by rockinthesixstring

  We are looking at renting out the basement suit in our home and want to offer internet as part of the package. I however do not want the downstairs tennent to have access to our network (home office = private data). We currently have a pfsense firewall as our gateway and a Windows Server 2003 box is doing our primary DHCP (192.168.0.0/24) and DNS. Here's what I'd like to do... I'd like to setup another subnet on the DHCP server (192.168.1.0/24), and hook in another wireless router (as access point only) and address it as 192.168.1.1... from there the router will hook into our primary switch and then out through the firewall. Will Server 2003 (If I add a 192.168.1.x/24 IP to the nic) serve DHCP to the devices that connect to the new router, and will it isolate that from our network? Thanks in advance... I'm very new to multiple subnets.

  Read the article

• Printer monitor software across multiple workstations (AD integrated)

  - by HannesFostie

  I was asked to see if there is any kind of (free) software that allows multiple people in an office that use the same printer to see what jobs have finished recently, which are queued and which is printing. Main reason is that sometimes multiple people have the same task where they need to print some kind of form, and they are unsure whether or not their colleague has already printed the file. Because the printer is AD integrated, they only see a short message when printing, but they do not see a proper printer queue. A simple tray icon/tool would be perfect, no real graphical user interface is required. If this turns out to be too hard to find, I will attempt to write a simple application or script for the job, but since this is a low priority job I decided to ask here first before I start messing around with scripting which isn't my forte. Thanks

  Read the article

• DC on Hyper V Host

  - by Saif Khan

  I've read a few similar questions but wasn't clear. I have a small office (13) users and recently purchased a new single server (this is all I have to work with for now). Server specs Memory - 16GB Drives - 6 SCSI (2TB) PROCESSOR - DUAL QUAD I plan on making the Hyper-V host the DC and then 2 VMs, one for a file server and the other an application server. Question - since I am restricted to this single server, would it be a big issue making the Hyper-V host the domain controller? Your input greatly appreciated.

  Read the article

• Excel crashes when opening Excel files from Internet Explorer

  - by Rob Z

  I have been running into some issues when opening Excel files from Internet Explorer, generally the first document or two will open fine but after that trying to open a file will cause Excel and Internet Explorer to crash to the desktop without any notifications being given. This doesn't happen for users who are running Excel 2007, but for users with Excel 2003 it may or may not happen to them. The files in question are Excel XML files and Internet Explorer 6 and Excel 2003 are being use. At this time it would not be possible to upgrade Internet Explorer, but it would be able to upgrade to Excel to version 2007 if that would resolve the issue. Overdue Update: We recently upgraded to Firefox at the office which has rendered this error a non-issue; however, it is still unresolved from the standpoint that we haven't been able to come up with an explanation to the issue. Since IE6 is still installed on the systems, a fix to the problem (or explanation of why it's happening) would be appreciated.

  Read the article

• Referring to mailmerge fields in an if statement

  - by Zian Choy

  Context: Windows 7 Microsoft Office Word 2007 I have a mailmerge field named "On_FB". Current code: { IF { On_FB } = "Y" "You're on Facebook." "You're not on Facebok."} The moment I get out of code-editing view, the code goes haywire. When I flip back to code-editing view, I see that the code has magically turned into: { IF " Y" = "Y" "You're on Facebook." "You're not on Facebok."} Needless to say, this is a complete bust because it will always say that the person is not on Facebook. I tried putting { On_FB } on its own and that works fine. What can I do to make the If statement work? (By the way, all the { and } were inserted via CTRL+F9.)

  Read the article

• is there any Open Source solution for Failover of incoming Traffic?

  - by sahil

  Hi, We have two ISP... and both ISP's Ip Nat with same Webserver IP, i want failover for incoming traffic , is there any open source solution? can i do it by making two name server , one for each ISP? ... I am not sure but as per my knowledge primary and secondary name server will reply in round robin method till they are live , once any name server will be unreachable then only another will be reply...so if i am right then i think i can do incoming failover by making two name server in my office... Waiting for your valuable response... Thanking you, Sahil

  Read the article

• XDMCP works for Solaris, not for RHEL

  - by joshxdr

  I have some old RHEL4 servers that until recently I was able to connect to remotely with Exceed (remote desktop using XDMCP) from my windowsXP PC. My PC is connected to our network by wired LAN. Recently it seems something has changed in our network. I can still connect to all the old Solaris and HPUX servers with Exceed, but for some reason I can no longer connect to the RHEL4 servers. I assume this is some kind of "security" feature turned on in our network. Does anyone know what this might be, and how I can tell IT to re-enable it? Update: A colleague has found that he can connect (very slowly) to these RHEL4 boxes with XDMCP if he is using our VPN from home, but when he is in the office using wired LAN he cannot connect to them. So it seems that there is some kind of firewall or ???, part of our wired LAN network, that is blocking XDMCP traffic from RHEL4.

  Read the article

• database on SSD: data only or the DBM program too?

  - by simone

  I plan on moving the data I use for statistical analysis (100-ish Gb) onto an SSD. The data is either sqlite single-file db's, or postgresql-managed data. The SSD is 240 Gb, 550 MB/s read and 520 MB/s write. Should I reserve that space for the data only, or would it be a good idea to install the operating system (Mac OS X) and the application directory (Adobe Suite, Microsoft Office and the like) on the SSD too? And would it make a substantial speed difference whether I also install the postgresql binaries on the SSD? I have plenty of other space (another 300Gb hard-drive, and a 1Tb one). Don't know the features of the non-SSD drives, though they're our standard equipment on all Macs, and they're definitely OK. Thanks.

  Read the article

• Windows 7 "Not Responding"

  - by sizeight

  At my office we've got 2 Dell XPS M1530 laptops. Both have been running up to date installations of Windows 7 with NOD 32 Anti Virus for months now with no problems. Last week however both started freezing with "Not responding" issues every few minutes when browsing the web. It doesn't matter which browser, the latest versions of Firefox, Chrome and IE8 all do the same. After a few minutes the browser "wakes up again" but freezes again very soon. I suspect it's an OS update issue, a driver/OS conflict or something. Anybody got a solution for this?

  Read the article

• Squid traffic tunneled through VPN

  - by NerdyNick

  So what I'm trying to do is have a Squid Proxy run on 1 machine along side a VPN connection. What I want to happen is all traffic running though the Squad Proxy would run though the VPN for its outbound. ie Desktop - (Squid Proxy - VPN) The goal is to allow my desktop selective tunneling through the VPN. So that Instant Messaging and the like that do not need to run through the VPN can go through my normal traffic. Typically I would go though a SSH Proxy but currently am forced to use VPN to gain entry into the office, and a Squid proxy seemed like it might work out the easiest for what I am needing. EDIT Realize I forgot to actually state what problem I'm running into. I have the Squid setup and verified it works, but once I connect to the VPN. All requests to Squid get accepted but Squid is unable to make the request over the VPN. So the client ends up just sitting there.

  Read the article

• Bridging VirtualBox over OpenVPN TAP adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• MS Word - Close Word when you close the last open document **using keyboard**

  - by Chad

  In MS Word, by default, you can use: Ctrl+F4 to close Word Ctrl+W to close the current document Is it possible to make Word close when you close the last open document? For instance, in Chrome, if you keep hitting Ctrl+W you'll eventually close the last tab, which will also close Chrome. I'd like the same functionality with Word (and the other Office products) where I can just keep closing documents until I close the last one, at which point the application closes. Unfortunately, Ctrl+W doesn't close Word, even when there are no documents open.

  Read the article

• Windows host MIA on network

  - by andrewbadera

  I've had a machine effectively disappear off my home office network. 192.168.1.100 - Windows 7 laptop (on domain) - problem machine 192.168.1.42 - Windows 2008 server (domain controller) 192.168.1.101 - Windows 7 laptop (guest; not on domain) For some reason I am unable to ping, tracert or remote desktop to 192.168.1.100 from .42 or .101. I can remote between .42 and .101 no problem however. .100 cannot ping nor remote desktop to .42 or .101. Remote Desktop access is enabled on .100. I've opened the firewall rules. I've disabled the firewall domain profile. I've turned the firewall service off entirely. No matter what I do, the .100 host is unreachable by any other host on the network. I'm at my wit's end. Thanks in advance for any debug advice!

  Read the article

• Using multiple wifi connections simultaneously on Windows

  - by Salman A

  My office PC has a one wireless network card and there are three available wifi connections: primary, backup and backup of a backup (grin). Is it possible for me to use all three simultaneously. If this results in an increase in bandwidth that's well and good, but primary reason is every now and then one of the network fails and i have to switch back and forth between the available networks by disconnecting, viewing available networks and connecting to next one hoping its running. Do i need more than one network card or a software e.g. a proxy.

  Read the article

• Using multiple wifi connections simultaneously on Windows

  - by Salman A

  My office PC has a one wireless network card and there are three available wifi connections: primary, backup and backup of a backup (grin). Is it possible for me to use all three simultaneously. If this results in an increase in bandwidth that's well and good, but primary reason is every now and then one of the network fails and i have to switch back and forth between the available networks by disconnecting, viewing available networks and connecting to next one hoping its running. Do i need more than one network card or a software e.g. a proxy.

  Read the article

• Site to site VPN using RRAS from an untrusted network?

  - by DrZaiusApeLord

  Our remote office will be moving to a new space where internet will be provided. They'll be behind a router doing NAT (I do not have admin rights to this router). They will be sharing a printer with the other people on the LAN, but will need VPN to our network for email and file shares. I was thinking of just having them run the windows VPN client and connecting via PPTP like they do when they are off-site, but I have read that multiple PPTP connections from the same NAT'd address to the same destination doesn't work well or at all. I am thinking some kind of site-to-site VPN is needed so there is just one tunnel. Can I just put in a VPN gateway, set it to connect to our RRAS/PPTP server, and have them use it as their default gateway? Perhaps even use the local default gateway for internet traffic. If so, what VPN gateway/device is recommended for this? Or other solutions? Thanks.

  Read the article

• Word is ignoring my 'Match Destination Formatting' preference when pasting text

  - by CreeDorofl

  I'm stuck using word 2007 at the office. It has options for retaining formatting, pasting as plain text, and pasting text to match the destination's formatting. That last option is the one I want, but word is blatantly ignoring it. I copy some text from a PDF, paste into word, and it retains the PDF's formatting... even though I went into options -- advanced -- changed all the dropdowns to "Match Destination Formatting". It also ignores "text only" option... It retains the exact mix of bold, italic, normal text & fonts. I can work around it by pasting to a plain text file, then pasting into word. Or I can do paste special -- unformatted text. But this is so irritating... I just want to ctrl+V and not hassle with it every single time. Is there a better fix?

  Read the article

• Toolkit & Habits for Linux Network & System Administration [closed]

  - by slashmais

  I am tasked with the administration of a small office network as well as several workstations running mostly Debian and Ubuntu. There are two servers: one database & print-server, and one backup & file server. Being relatively new to this side of things, knowing enough to help myself to some degree on Linux, I would like to know what software tools and tasks/habits I can use/acquire to learn this field and be effective while doings so. I don't need to know what is the best, just what a newbie sys-admin can use as a starter-pack to learn and use as a base to grow into proper system administration. [edit] What I need is those few basic tools to start with, and the kind of things I need to do regularly, e.g.: which logs to check, when & what to monitor, the kind of 'right' place to start and to which I can ad as I need.

  Read the article

• Microsoft Outlook x Lotus Notes in enterprise environment

  - by Ladislav Mrnka

  I'm working in company (several thousands client computers) using tools like MS Outlook + Exchange + Sharepoint + Communication server. Now our mother company shared the idea that everything should be moved to IBM Lotus Notes + Domino. The reason for this is that Outlook based solution is too expensive (it is the official statement even they don't want to replace MS Office yet). Other reason probably is that they received a lot of licences for Lotus when they bought IBM servers to new data center. My question is: Is this reasonable change or is it just some management game and IBM's marketing? Will it really save money? Other question: Is Lotus better then MS solution? This is serious question, it is not mentioned to open any kind of flame war. I just don't believe the decission and I have never used Lotus tools.

  Read the article

• Command-line HTTP crawler for Windows?

  - by Pekka

  Would somebody have a recommendation for a web site crawler that can be invoked and equipped with settings from the command line? This would need to run in a Windows environment. Saving the data, following stylesheet links etc. is not an issue. I only need the crawler to start with a page, parse it, and follow all the links on the same domain so that in the end, all pages on the site have been requested once. Background: I'm setting up a web site that gets frequently uploaded from an office location. Combining data from various sources, it has several levels of caching. I don't want the first user to visit the site after a fresh upload to have to wait until the page has been generated and saved in the cache.

  Read the article

• Modify database for the SharePoint 2010 Enterprise Search administration web site

  - by Mark Hall

  Does anyone know how to modify the database settings for the Enterprise Search administration web site? When you configure the service application via Central Administration, SharePoint just decides to use the default database server and gives a name like Enterprise_Search_DB_Identifier. I want to modify this to atleast give a name that makes scense like SharePoint_Search_AdministrationWebContent, and it might be nice to move it to the database server that is hosting the crawl and property database. I figured out how to move the Central Administration web content database, but this database is not listed as a content database. It is listed as a Microsoft.Office.Server.Search.Administration.SearchAdminDatabase. I have not tested to see if the same process would work but because you are doing a RemoveContentDatabase and NewContentDatabase, I would assume not. Any help would be appreciated.

  Read the article

• Installing packages in R path[1]="\file/users/bernard/R/win-library/2.15": Access is denied

  - by user1812210

  I recently attended an R training course and was happily working with a laptop in RStudio. On my return to the office I installed RStudio and I tried to run some scripts I had gathered from the course. However, these scripts required me to install packages and when I tried to install the packages the result was an error. Error in install.packages : path[1]="\file/users/bernard/R/win-library/2.15": Access is denied In my firm we write to a server drive refferred to as the U: drive rather than the hard disk on the desktop for security reasons. Any ideas what is going on? I have checked the properties of the folder in windows and it says I have permission but still it fails. I have tried creating a folder on the C drive and directing R_LIBS_USER to it but no luck.

  Read the article

• Why is my eth0 getting a dynamic ip when it is configured to be static?

  - by sdek

  For some reason our office linux box is being assigned an ip address via dhcp and I don't know why. What is confusing to me is that when I check system-config-network it shows that my eth0 is setup to be a static ip address. And /etc/sysconfig/network-scripts/ifcfg-eth0 also shows it is setup to be a static ip, yet it is getting a different ip address than the one specified in the ifcfg-eth0. Let me know if you have any suggestions on or ideas on where I can look next. Here are a few details that might help you figure out what an idiot I am :) Fedora 11 Router in front of this box is running dhcp, starting at 10.42.1.100 This box is configured to be 10.42.1.50 (at least I think it is!), subnet 255.255.255.0 (which is same as the router's lan subnet) Instead of having the static IP, this box is getting assigned 10.42.1.100. Here are the ifcfg-eth0 details DEVICE=eth0 BOOTPROTO=none ONBOOT=yes TYPE=Ethernet USERCTL=no NM_CONTROLLED=no NETMASK=255.255.255.0 IPADDR=10.42.1.50 GATEWAY=10.42.1.1

  Read the article

• Trucrypt or any HDD encryption solution with a bypass?

  - by sorrrydoctorforlove

  Hello experts, in my environment here we have started using trucrypt to encrypt and protect our laptops that are being brought out of the office. The issue comes with the password, we can document the passwords and assign them to users but if they simply use the program to change the password, and then forget it we are in trouble. We backup our data to external locations so it should be fine, but is there any way to install a bypass to be able to boot the laptop or stpo users changing their password (while they have local admin access)? Or should we try another solution? thanks.

  Read the article

• from word to pdf including bookmarks

  - by wanderameise

  hey guys, I created a word file with office 2007 and exported it via jaws pdf. Now I want some bookmarks or any kind of "linking-action" that makes it easier to navigate through the document. My PDF viewer doesnt allow to create bookmarks in the free version so I guess I need to handle this via word! maybe using a table of content? anything that is recognized by pdf! thanks in advance edit: I realised it with using a table of centent.it works fine but that wasnt the solution if been looking for.I like to have some bookmarks but my pdf creator doesnt take over the one I created in word. need to figure out how this could works

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >