Search Results

Search found 4361 results on 175 pages for 'multivariate partition'.

Page 134/175 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• Backup and restore.

  - by Xavierjazz

  I have a Thinkpad T60 with a 150GIg internal hard drive. XP Pro SP3. I also have a similar hard drive that used to be in another laptop connected via USB. It contains only data. I have cleared out a lot of duplicate files and now would like to back both up. I have Retrospect and a brand new 1Tbyte drive for this purpose. Can I back up the whole computer (both drives) but, in case only one fails, can I just restore that drive or do I have to restore both drives at the same time? I don't understand how partitions work so might I be able to partition the 1T drive and restore each smaller drive independently? Thanks.

  Read the article

• Speeding up ROW_NUMBER in SQL Server

  - by BlueRaja

  We have a number of machines which record data into a database at sporadic intervals. For each record, I'd like to obtain the time period between this recording and the previous recording. I can do this using ROW_NUMBER as follows: WITH TempTable AS ( SELECT *, ROW_NUMBER() OVER (PARTITION BY Machine_ID ORDER BY Date_Time) AS Ordering FROM dbo.DataTable ) SELECT [Current].*, Previous.Date_Time AS PreviousDateTime FROM TempTable AS [Current] INNER JOIN TempTable AS Previous ON [Current].Machine_ID = Previous.Machine_ID AND Previous.Ordering = [Current].Ordering + 1 The problem is, it goes really slow (several minutes on a table with about 10k entries) - I tried creating separate indicies on Machine_ID and Date_Time, and a single joined-index, but nothing helps. Is there anyway to rewrite this query to go faster?

  Read the article

• Create an image of a pure Ubuntu-Installation on Macbook Pro

  - by Stefan Müller

  I'm running Ubuntu 11.10 on my Macbook Pro (Late 2009) as the only operating system, so theres's no Mac OS X oder Bootcamp installed. It runs fine and now i'd like to create an image of the current installation. Unfortunately my Acronis True Image cd doesn't boot on this device and my attempts to create an image with partimage or dd from a bootable ubuntu live cd to a external hd failed ("can't read from block 0"). Are there any others out there with such an installation and if yes: how did you succeed in imaging your partition/device?

  Read the article

• Factory Reset Asus

  - by Ben

  I have an ASUS All-in-one PC (not sure what model) and I'm trying to perform a Factory Restore but nothing is working yet. I have tried pressing F8, all I had access to was "Restore from an earlier point" - Today was the earliest point; and "Restore from an Image" - which I don't have. I have tried pressing F9, F10, and F11, but all that brought me was options to Start Windows normally, Run a system diagnostic, or try other options (F8 menu). I don't have any other discs to restore from or anything, and I have found a tutorial to try and create a Partition(?) to load the restore from that. Does anyone have any other ideas?

  Read the article

• Reliable Linux RAID Card

  - by Chris S

  Can anyone recommend an appropriate RAID card for use under Linux (Ubuntu)? I have three Western Digital SATA drives, and would like to setup either RAID-1 or RAID-5. Software RAID has been very flakey and unreliable for me (e.g. it doesn't seem to mirror the boot partition). Unfortunately, most RAID cards I've seen online don't mention any Linux driver support. Would most cards work in Linux, or do I have to look at a select few that explicitly support Linux?

  Read the article

• What's the best way to format an external HDD for both OSX and Windows ?

  - by George Profenza

  I have an external HDD (1TB) and I'd like to use it on OSX and Windows. I had another external HDD using NTFS and I used NTFS-3G on osx to write files, but I found the reading/writing very slow. Googling a bit I see many people recommend HFS+ in conjuction with HFS Explorer for Windows. Is this the best way ? Is it possible to have two partitions, one HFS+ and one NTFS ? Is it a good option or is it better to use one partition ? I've seen this thread on using UDF for USB flash drive. Would that be suited for an USB external HDD ?

  Read the article

• What can I do to resolve a cng.sys error while booting?

  - by denonth

  I have been downloading all bunch of things using torrent and I have restarted my pc and now every time at booting I get BSOD with the following error: ( cng.sys ; 8C1ACB28 at 8C183000 DATESTAMP 4ec48143 error 0xc0000001 ) I was checking this error and it seems that I have some sort of malware on my PC. How can I achieve to connect to Windows? I have tried repair and it says that I can't repair it. I have tried to boot with all F8 options and still I get restarted with BSOD. I have installed other Windows version of Windows on other partition. My version of Windows which is corrupted is Windows 7 ultimate x86. EDIT:

  Read the article

• WSUS setup on ADS Domain Controller VM

  - by NickC

  How should I setup sharing/directory permissions to allow the following to work: VMHost - Hyper-V partition (not part of domain) ADServer - Active Directory Domain Controller running as guest VM on VMHost \VMHost\Updates disk share for WSUS to put the updates and other local files Problem is what permissions do I need to give to \VMHost\Updates to allow WSUS to work with this directory to avoid "The WSUS content directory is not accessible" error which I am currently seeing. As far as I can tell WSUS runs as "domain/Network Service" account. Question is without adding VMHost to the domain how do I give that user appropriate permissions to this directory? Is there a way that VMHost can be told to trust ADServer and then be able to use users accounts from there? Sort of relates to my other post here: Win 2012 Domain controller VM, should the Hyper-V host be part of the domain? Thanks, Nick

  Read the article

• Cannot open an external hard drive in Windows

  - by SeeBees

  In Windows 7, I was installing wubi ubuntu to an external hard drive when suddenly it disconnected from the PC. After I connected it back to PC, and double clicked the drive's icon, Windows didn't show the content of the disk but asked me whether I wanted to format it. The hard drive has only one partition. Its format is NTFS. I also connected the disk to Windows XP. It makes the Windows Explorer super slow and I cannot open the disk as well. I can open the disk on Ubuntu and Mac. Is it possible to restore the disk and make it run in Windows? Thanks

  Read the article

• Dell Media Direct is rebooting my machine when it goes into sleep mode

  - by wsanville

  I've got a Dell studio 1535 laptop, which shipped w/ Vista 32 bit. I've since formatted and installed Win 7 64. Everything has been fine for months, but recently, every time I leave my machine unattended and it goes to sleep, it wakes with the Dell Media Direct splash screen, and then goes to the "Windows was not shut down properly..." dialog that asks if you want to boot safe mode/start Windows normally/etc. The stupid button is also stuck on currently, but even when it is off, the problem still occurs. From the searching I've done, I've learned that the program is installed on its own partition, but I'm fairly certain I formatted everything (see screenie of my partitions: http://www.engr.uconn.edu/~wsj05001/misc/partitions.png). How can I stop the madness?

  Read the article

• suggestions for migrating a windows 7 install to a new 4K sector disk

  - by myCubeIsMyCell

  Hi, I'm looking to upgrade the disk on a windows 7 box to a new larger drive. In the past for such migrations I'd just hook both drives up and use a linux boot disk and use dd to copy from one disk to the next... boot up the new drive & expand the partition. The drive I just purchased however is a western digital using 4k sectors... not sure if there'd be any complications using my old method moving from a 512b sector drive. Current plan is to try the migration by doing a win7 system image backup to an external drive... then restore the image to the new drive via system restore boot disk. Any suggestions or recommendations on how to best complete this migration would be greatly appreciated. Thanks!

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• Making fdisk see software RAID 0

  - by unknownthreat

  I am following http://grub.enbug.org/Grub2LiveCdInstallGuide and I am using software RAID 0. I am using Ubuntu 10.10 LiveCD and is trying to restore grub2 after installing Windows 7 in another partition. Here is the console's outputs: ubuntu@ubuntu:~$ sudo fdisk -l Unable to seek on /dev/sad ubuntu@ubuntu:~$ sudo dmraid -r /dev/sdb: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 /dev/sda: nvidia, "nvidia_acajefec", stripe, ok, 488397166 sectors, data@ 0 So do you have an idea for how to make fdisk see my RAID array? How to make fdisk detect the Software RAID like dmraid?

  Read the article

• Ubuntu PowerEdge T110

  - by Josh

  I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

  Read the article

• Identify SATA hard drive

  - by Rob Nicholson

  Very similar question to: Physically Identify the failed hard drive But for Windows 2003 this time. Scenario: Four identical SATA hard drives plugged into motherboard (no RAID controller here) Configured as single drive in Windows as a spanned volume One of them is starting to fail with error "The driver detected a controller error on \Device\Harddisk3" How do you cross-reference Harddisk3 to the physical SATA connection on the motherboard so you know which drive to replace? I know replacing this drive will trash the spanned array requiring it to be rebuilt anyway so my rough and ready solution is: Delete the spanned partition Create individual partitions on each drive labelled E: F: G: and H: and work out which one is Harddisk3 Power down, remove each disk one at a time, power-up until the drive letter disappears But this seems a rather crude method of identifying the drive. The SATA connectors will be numbered on the motherboard but I appreciate this might not cross-match to what Windows calls them. Thanks, Rob.

  Read the article

• Seasgate GoFlex NAS + Horrible Speed = Bad Experience

  - by Jon H

  I am having issues with transfer speeds from my desktop PC to my NAS. I have my NAS hooked up to a Gigabit Gateway as well as my Desktop with Cat 5e. I see up to 4.0 MB/Second Transfer Rates, the normal is about 2.5 MB/Seconds. There is 3 Partitions on my NAS, Public, Private, Backup. When I transfer from Private to Public I see the speeds above. If its under the same partition almost instant. I was wondering if the speeds I am seeing is in due to my Computer or the NAS. I was looking into building my own Media Server in due to these horrible speeds. Is their anything I can do in the mean time to speed this up? Motherboard = M3970AM-HP (Angelica) Processor = AMD FX 6100 Ram = 10GB PC3-10600 MB/sec Hard Drive (1) = 1.5TB SATA 3.0GB 5400RPM Hard Drive (2) = 120GB SATA SSD NAS = Seagate 3TB Go Flex Home Connection (1) = 1000 Base T Connection (2) = Wireless N

  Read the article

• VirtualBox, physical disks, and snapshots

  - by noamtm

  I have an Ubuntu guest installed on a raw HDD (entire disk, not a partition). It runs just fine under WinXP. In addition, I was able to boot directly into it (using the BIOS boot-device selector). At some point, I have created a snapshot of the VM. I have made some changes since then. Today, after a long time, I tried booting into the "VM" disk. It worked, but all the data there is pre-snapshot (or, rather, frozen at the snapshot). Can I somehow merge the changes since I took the snapshot into the physical state?

  Read the article

• fdisk (linux) partitioning raid0

  - by silverrocker

  'm trying to create partitions for a slackware instalation on my computer (beside Windows 7) just to have a nice distro running mostly for school but when I run fdisk and print the partitiontable I get the following message: Partition x does not end on cylinder boundary. (in my case x = 1, just using x to help googlers). I must say I'm using a raid card (AMCC 3ware 9500S SATA RAID Controller). Maybe this is the problem. How can I fix this without loosing any data? (I've posted this qeustion on stack overflow aswell but then people sugjested it should be moved to here, but I don't know how to move my question so I just posted it here manually (I hope that's ok))

  Read the article

• Large temp files created in Windows Server 2003 temp folder

  - by BlueGene

  I'm managing a Windows Server 2003 with around 30 GB space in primary partition. A couple of times the server has crashed with error message saying that the C: drive is full. After searching folders to free up space, I found that lot of temp files being created in C:\WINNT\Temp and some of them of enormous size with more than 2GB. The temp files have common name, Efs###.tmp. Since we encrypt files frequently using Windows's EFS, I initially suspected Windows encryption. But after reading the documentation, I found that Efs###.tmp are in fact created by EFS but they are created only under the folder which you're currently encrypting, not in Temp folder. This looks very strange since Efs##.tmp files shouldn't be created under C:\WINNT\Temp unless someone tried to encrypt that Temp folder itself. The server has Tivoli Backup client. Could that be messing with windows Encryption? Can anyone shed some light on what could be causing the issue?

  Read the article

• Need help. HDD Failed

  - by jiewmeng

  i have a seagate 3.5" 500GB SATA2 HDD that i put in a USB case (vantec) that failed recently. symptoms: at first, it started except that attempts made to browse certain folders resulted in "Data Error (Cyclic Redundancy Check)". then when i tried restarting the hdd, then i got a RAW partition, and windows 7 said i need to format it. i also tried using a desktop to connect to the HDD directly using SATA, windows 7 stuck at "starting windows" for abt half hour b4 i gave up on it. in the BIOS, it seems to detect the HDD model correctly, something like STA3500xxx something like that i also tried using TestDisk as suggested by jaclaz on MSFN and it did not find any partitions what could i do now?

  Read the article

• Getting kernel errors when manually mounting VirtualBox shared folders

  - by Ross

  Updated: I've rephrased this problem as I understand it a bit more now (and have encountered another problem). I'm using a Fedora 15 guest on a Windows 7 host using VirtualBox. I am trying to mount a partition on the host PC as a shared folder for use in the guest. The folder appears in /media and is accessible when I use the auto-mount feature when setting up the shared folder, but when I attempt to mount without auto-mount I get the following error: $ sudo mount.vboxsf data /mnt/host_data /sbin/mount.vboxsf: Could not add an entry to the mount table.: Invalid argument In addition a popup appears (part of Fedora/GNOME) reporting a crash in the kernel package: WARNING: at lib/list_debug.c:26 __list_add+0x3e/0x81() However the shared folder seems to work, I can certainly browse it (although everything seems to be executable, probably down to a Windows host). Is there something wrong with what I'm doing or is this a bug (and in which case should it be reported to the Linux Kernel team or VirtualBox)?

  Read the article

• How do I minor upgrade MySQL on Windows?

  - by TruMan1

  I currently have MySQL 5.1.35 installed on a Windows 2008 server via the MSI installer. I need to upgrade to the latest 5.1.44 to fix a bug, but docs were not clear on how to do this. I ran the MSI installer, but it did not give me any upgrade option so I quit it. I am weary because it's a production machine with many PHP websites running on it. Also, my data directory is not the default one, it's kept on another partition. How can I upgrade it? Thanks for any help.

  Read the article

• Ubuntu 9.04 Cannot Connect to visible open wifi ap (reason 6)

  - by Andrew Bolster

  I'm travelling currently so the last network i connected successfully to was my home wpa-psk network. I hadn't tried anything until i got to my accommodation that is an open network (that I'm on now on the Win7 partition on my laptop). The network (and a similar archetypical 'linksys' open network, aswell as some protected local networks are correctly displayed in network-manager and upon selection, it happily spins around to its hearts content for a while before saying 'no chance boy'. /var/log/syslog spills out the usual combination of wpa_supplicant and kernel messages, the most interesting of are that the kernel deauthentication reason 6 response. 6 apparently means class2FrameFromNonAuthStation...Client attempted to transfer data before it was authenticated. Anyone seen anything like this? I've already tried going closer to the router to no avail. I don't remember seeing this any other time I've connected to a open AP, even if that AP is far away. (Signal strength for this AP is good, kismet says its around -57dBm, well above the threshold of -80dBm, and I've tried all the suggestions from the 'Related Questions'

  Read the article

• How can I format a USB drive as FAT from a MacBook Pro?

  - by Edward Tanguay

  I plugged in a 250GB USB hard drive into my MacBook Pro and want to format it in FAT so I can transfer files back and forth between a windows machine. (My windows7 machine only formats in exFAT which my Snow Leopard 2.6.4 doesn't support until I do the update). So I want to format it on the mac. but when I right click on the drive, it gives me the options to eject, copy, but not to format. I can go into Disk Utilities, click on Partition, but the only option is the "Mac Journaled format". How can I Format my USB drive as FAT from my MacBook Pro?

  Read the article

• What is the best way to create RAID 1?

  - by user3125731

  I'm looking for a way to create the RAID 1 array without losing my data on CentOS. Here's my situation: I've got a web server running on CentOS. There is one VG partition with few LV volumes. I bought a second HDD (the same model and size as the first one) and I want to create the RAID 1 configuration. I can't just shut down this server for more than an hour because my clients will be disappointed. I need to do this as quickly as possible with minimal risk of data loss.

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >