Search Results

Search found 16544 results on 662 pages for 'sys path'.

Page 134/662 | < Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >

• Openquery - unable to begin a distrubuted transaction

  - by dc2

  I am trying to use open query to run a stored procedure in a remote database, and insert it into a table in my local database: -- this works exec remotesvr.sys.dbo.golden_table 'some', 'parameters' While the above works out, I try the following: insert into my_local_table exec remotesvr.sys.dbo.golden_table 'some', 'parameters' I get a SQL error to the effect of 'unable to begin a distributed transaction'. Is there any way around this?, i.e. can I execute take the results of a remote stored procedure and put its contents in a local table?

  Read the article

• SQL Syntax for testing objects before creating views & functions

  - by Scott Weinstein

  I'm trying to figure out the syntax for creating a view (or function) but only if a dependent CLR assembly exits. I've tried both IF EXISTS (SELECT name FROM sys.assemblies WHERE name = 'MyCLRAssembly') begin create view dbo.MyView as select GETDATE() as C1 end and IF EXISTS (SELECT name FROM sys.assemblies WHERE name = 'MyCLRAssembly') create view dbo.MyView as select GETDATE() as C1 go Neither work. I get Msg 156, Level 15, State 1, Line 2 Incorrect syntax near the keyword 'view'. How can this be done?

  Read the article

• NZEC in spoj FACKT

  - by frodo

  I was trying to solve this problem http://www.spoj.pl/problems/FACKT/, and I keep getting a Non-Zero Exit Code (NZEC). How exactly do I figure out what to change in the code to overcome this? Here is the code import math import sys def cal_num(n): i = 1 f = 1 while f<n: f *= i i = i + 1 return i-1 while 1: line = sys.stdin.readline() if line == "": break n = int(line) x = cal_num(n) y = math.factorial(2*x) l = int(math.ceil(math.log(y,10))) print (x,l) Any suggestion would be welcome.

  Read the article

• What is 'type' in systypes?

  - by cruzy

  In sys.systypes ... what exactly is 'type'? What exactly does .... bigint int varchar ... order mean when I execute select * from sys.systypes order by type desc

  Read the article

• install python2.7.3 + numpy + scipy + matplotlib + scikits.statsmodels + pandas0.7.3 correctly

  - by boldnik

  ...using Linux (xubuntu). How to install python2.7.3 + numpy + scipy + matplotlib + scikits.statsmodels + pandas0.7.3 correctly ? My final aim is to have them working. The problem: ~$ python --version Python 2.7.3 so i already have a system-default 2.7.3, which is good! ~$ dpkg -s python-numpy Package: python-numpy Status: install ok installed and i already have numpy installed! great! But... ~$ python Python 2.7.3 (default, Oct 23 2012, 01:07:38) [GCC 4.6.1] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import numpy as nmp Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named numpy this module couldn't be find by python. The same with scipy, matplotlib. Why? ~$ sudo apt-get install python-numpy [...] Reading package lists... Done Building dependency tree Reading state information... Done python-numpy is already the newest version. [...] why it does not see numpy and others ? update: >>> import sys >>> print sys.path ['', '/usr/local/lib/python27.zip', '/usr/local/lib/python2.7', '/usr/local/lib/python2.7/plat-linux2', '/usr/local/lib/python2.7/lib-tk', '/usr/local/lib/python2.7/lib-old', '/usr/local/lib/python2.7/lib-dynload', '/usr/local/lib/python2.7/site-packages'] >>> so i do have /usr/local/lib/python2.7 ~$ pip freeze Warning: cannot find svn location for distribute==0.6.16dev-r0 BzrTools==2.4.0 CDApplet==1.0 [...] matplotlib==1.0.1 mutagen==1.19 numpy==1.5.1 [...] pandas==0.7.3 papyon==0.5.5 [...] pytz==2012g pyxdg==0.19 reportlab==2.5 scikits.statsmodels==0.3.1 scipy==0.11.0 [...] zope.interface==3.6.1 as you can see, those modules are already installed! But! ls -la /usr/local/lib/ gives ONLY python2.7 dir. And still ~$ python -V Python 2.7.3 and import sys sys.version '2.7.3 (default, Oct 23 2012, 01:07:38) \n[GCC 4.6.1]' updated: Probably I've missed another instance... One at /usr/Python-2.7.3/ and second (seems to be installed "by hands" far far ago) at /usr/python2.7.3/Python-2.7.3/ But how two identical versions can work at the same time??? Probably, one of them is "disabled" (not used by any program, but I don't know how to check if any program uses it). ~$ ls -la /usr/bin/python* lrwxrwxrwx 1 root root 9 2011-11-01 11:11 /usr/bin/python -> python2.7 -rwxr-xr-x 1 root root 2476800 2012-09-28 19:48 /usr/bin/python2.6 -rwxr-xr-x 1 root root 1452 2012-09-28 19:45 /usr/bin/python2.6-config -rwxr-xr-x 1 root root 2586060 2012-07-21 01:42 /usr/bin/python2.7 -rwxr-xr-x 1 root root 1652 2012-07-21 01:40 /usr/bin/python2.7-config lrwxrwxrwx 1 root root 9 2011-10-05 23:53 /usr/bin/python3 -> python3.2 lrwxrwxrwx 1 root root 11 2011-09-06 02:04 /usr/bin/python3.2 -> python3.2mu -rwxr-xr-x 1 root root 2852896 2011-09-06 02:04 /usr/bin/python3.2mu lrwxrwxrwx 1 root root 16 2011-10-08 19:50 /usr/bin/python-config -> python2.7-config there is a symlink python-python2.7, maybe I can ln -f -s this link to exact /usr/Python-2.7.3/python destination without harm ?? And how correctly to remove the 'copy' of 2.7.3?

  Read the article

• Apache doesn't run multiple requests

  - by Reinderien

  I'm currently running this simple Python CGI script to test rudimentary IPC: #!/usr/bin/python -u import cgi, errno, fcntl, os, os.path, sys, time print("""Content-Type: text/html; charset=utf-8 <!doctype html> <html lang="en"> <head> <meta charset="utf-8" /> <title>IPC test</title> </head> <body> """) ftempname = '/tmp/ipc-messages' master = not os.path.exists(ftempname) if master: fmode = 'w' else: fmode = 'r' print('<p>Opening file</p>') sys.stdout.flush() ftemp = open(ftempname, fmode) print('<p>File opened</p>') if master: print('<p>Operating as master</p>') sys.stdout.flush() for i in range(10): print('<p>' + str(i) + '</p>') sys.stdout.flush() time.sleep(1) ftemp.close() os.remove(ftempname) else: print('<p>Operating as a slave</p>') ftemp.close() print(""" </body> </html>""") The 'server-push' portion works; that is, for the first request, I do see piecewise updates. However, while the first request is being serviced, subsequent requests are not started, only to be started after the first request has finished. Any ideas on why, and how to fix it? Edit: I see the same non-concurrent behaviour with vanilla PHP, running this: <!doctype html> <html lang="en"> <!-- $Id: $--> <head> <meta charset="utf-8" /> <title>IPC test</title> </head> <body> <p> <?php function echofl($str) { echo $str . "</b>\n"; ob_flush(); flush(); } define('tempfn', '/tmp/emailsync'); if (file_exists(tempfn)) $perms = 'r+'; else $perms = 'w'; assert($fsync = fopen(tempfn, $perms)); assert(chmod(tempfn, 0600)); if (!flock($fsync, LOCK_EX | LOCK_NB, $wouldblock)) { assert($wouldblock); $master = false; } else $master = true; if ($master) { echofl('Running as master.'); assert(fwrite($fsync, 'content') != false); assert(sleep(5) == 0); assert(flock($fsync, LOCK_UN)); } else { echofl('Running as slave.'); echofl(fgets($fsync)); } assert(fclose($fsync)); echofl('Done.'); ?> </p> </body> </html>

  Read the article

• Windows 7: How to place SuperFetch cache on an SSD?

  - by Ian Boyd

  I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

  Read the article

• can't login to new install of SQL 2008 x64 via SSMS

  - by tpcolson

  I have performed a fresh install of SQL 2008 x64 on a fresh install of Server 2008 R2 x64 in an AD environment. Upon install completion, I cannot login to the SQL Instance via SSMS, with the following error: Login failed for user domain\user. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]. Background: the server is correctly joined to the AD Domain, the install was performed with defaults, windows authentication only (per organizational rules), the SQL install completes with no errors, domain\user was added as SQL Amin during setup account provisioning, I am logged into to console as domain\user when this error occurs, windows firewall is OFF, UAC is ON (an will never be turned off in accordance with organizational policy). To troubleshoot this error I have tried: Run SSMS as administrator: fail; Start SQL in single user mode, run SSMS: fail Start SQL in single user mode, run SSMS as administrator: Success Start SQL in single user mode, run SSMS as administrator, remove domain\user from sysadmin group, re-add, run SSMS: fail; Any combination and permutation of log off and log on, reboot, and chant gregorian prayers: fail; Reimage server with 2008 x64, slipstream SP2 into SQL 2008 install, all above troubleshooting steps are repeatable exactly, so I've narrowed this down to not being a SP issue; (this is NOT 2008 SQL R2) Any suggestion on how to grant management access to this fresh install of SQL 2008 via SSMS? Our organizational policy is no console access to servers, management will be done via management tools intalled on client workstations. domain\user is a group of 8 users whom will have SSMS installed on workstations. However, we can't even access SQL via SSMS from the console! We cannot deploy this in an environment where these 8 users will have to sneak into the server closet on the weekends and have console access to SQL and run SSMS as administrator. EDIT: domain\group is a replacement for the actual object; the queries indicate that domain\group does indeed have the right privelges....!?! 1> EXEC xp_logininfo 'domain\group' go account name type privilege mapped login name permission path 'domain\group' group admin 'domain\group' NULL xp_logininfo seems to show 'domain\group' in the sql admin group; 1> SELECT A.name AS 'Role', B.name AS 'Login' 3> FROM sys.server_role_members C 5> INNER JOIN sys.server_principals A ON A.principal_id = C.role_principal_id 7> INNER JOIN sys.server_principals B ON B.principal_id = C.member_principal _id 9> go Role Login sysadmin sa sysadmin NT AUTHORITY\SYSTEM sysadmin NT SERVICE\MSSQLSERVER sysadmin NT SERVICE\SQLSERVERAGENT sysadmin domain\group 1> SELECT PRINCIPAL_ID AS [Principal ID], 2> NAME AS [User], 3> TYPE_DESC AS [Type Description], 4> IS_DISABLED AS [Status] 5> FROM sys.server_principals 6> GO Principal ID User Type Description Status ------------ ------------------------------------------------------------------- ------------------------------------------------------------- ------------------ ------------------------------------------ ------ 1 sa SQL_LOGIN 1 2 public SERVER_ROLE 0 3 sysadmin SERVER_ROLE 0 4 securityadmin SERVER_ROLE 0 5 serveradmin SERVER_ROLE 0 6 setupadmin SERVER_ROLE 0 7 processadmin SERVER_ROLE 0 8 diskadmin SERVER_ROLE 0 9 dbcreator SERVER_ROLE 0 10 bulkadmin SERVER_ROLE 0 101 ##MS_SQLResourceSigningCertificate## CERTIFICATE_MAPPED _LOGIN 0 102 ##MS_SQLReplicationSigningCertificate## CERTIFICATE_MAPPED _LOGIN 0 103 ##MS_SQLAuthenticatorCertificate## CERTIFICATE_MAPPED _LOGIN 0 105 ##MS_PolicySigningCertificate## CERTIFICATE_MAPPED _LOGIN 0 257 ##MS_PolicyTsqlExecutionLogin## SQL_LOGIN 1 259 NT AUTHORITY\SYSTEM WINDOWS_LOGIN 0 260 NT SERVICE\MSSQLSERVER WINDOWS_GROUP 0 262 NT SERVICE\SQLSERVERAGENT WINDOWS_GROUP 0 263 ##MS_PolicyEventProcessingLogin## SQL_LOGIN 1 264 ##MS_AgentSigningCertificate## CERTIFICATE_MAPPED _LOGIN 0 265 domain\group WINDOWS_GROUP 0 (21 rows affected)

  Read the article

• How to place SuperFetch cache on an SSD?

  - by Ian Boyd

  I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

  Read the article

• Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

  - by user135501

  I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start

  Read the article

• Install Control Center Agent on Oracle Application Server

  - by qianqian.wu

  Control Center Agent (CCA) The Control Center Agent is the OWB component that runs the Template Mappings in the Oracle Containers for J2EE (OC4J) server; also referred to as the J2EE Runtime. The Control Center Agent provides a Java-based runtime environment that can be installed on Oracle and non-Oracle database hosts. The Control Center Agent provides fundamental infrastructure for the heterogeneous, Code Template-based mapping support and Web services-related features of OWB in this release. In Oracle Warehouse Builder 11gR2 the Control Center Agent, by default will run in the built-in OC4J that is bundled in the Oracle Home. Besides that, you also have ability to install the Control Center Agent in an Oracle Application Server install. In this article, you will find step-by-step instructions how to install the Control Center Agent on an Oracle Application Server instance. The instructions cover the following tasks: Task 1: Install and Configure the Application Server Task 2: Deploy the Control Center Agent to the Application Server Task 3: Optional Configuration Tasks   Task 1: Install and Configure the Application Server Before configuring the Application Server, you need to install it from Oracle Application Server CD-ROM, or by downloading the installation program from Oracle Technology Network (OTN). Once the installation is completed, you are ready to configure the Application Server. The purpose of the configuration task is to make sure the Control Center Agent ear file can be deployed and runs in the Application Server successfully. The essential configuration tasks are outlined below: · Modify the OC4J Startup Script · Set up Control Center Agent Server Side Logging · Set up Audit Table Data Source · Copy ct_permissions.properties File · Set up Security Roles for Control Center Agent · Create JMS Queues · Install JDBC Drivers to OC4J Modify the OC4J Startup Script The OC4J startup script “opmn.xml” is located in Application Server configuration directory, $AS_HOME/opmn/conf. $AS_HOME stands for the root home directory of the application server. Open the file opmn.xml in a text editor, and alter the contents of the file as displayed in the following sample. You need to make sure that: The MaxPerSize is set to 128M. This is to ensure that you allocate enough PermGen space to OC4J to run Control Center Agent. This will prevent java.lang.OutOfMemoryError when running the agent. The Python.path sets the path for the Python library files used by the Control Center Agent: jython_lib.zip and jython_owblib.jar. These two files are in the $OWB_HOME/owb/lib/int directory, where $OWB_HOME is the directory where owb is installed. · The km_security_needed determines whether restrictions will be applied to the kinds of operating system commands allowed to be executed by the OWB Code Template script executed by Control Center Agent. Setting km_security_needed to “true” enforces such restriction while setting it to “false” removes such restrictions. Set up Control Center Agent Server Side Logging Ensure that you are in the Application Server configuration directory, $AS_HOME/j2ee/home/config. Open the file j2ee-logging.xml in a text editor and add the following lines to the log handler section. The jrt-internal-log-handler is the handler used by Control Center Agent runtime logger to create log files. Then add the following entry into the loggers section to create the logger for Control Center Agent runtime auditing. Set up Audit Table Data Source To enable Audit Table logging, a managed data source and connection pool need to be set up before Control Center Agent deployment. Ensure that you are in the Application Server configuration directory, $AS_HOME/j2ee/home/config. Open the file data-sources.xml in a text editor. Define the audit data source shown below in the file, <managed-data-source name="AuditDS" connection-pool-name="OWBSYS Audit   Connection Pool" jndi-name="jdbc/AuditDS"/> <connection-pool name="OWBSYS Audit Connection Pool">   <connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"     user="owbsys_audit" password="owbsys_audit"     url="jdbc:oracle:thin:@//localhost:1521/ORCL"/> </connection-pool> Copy ct_permissions.properties File The ct_permissions.properties can be obtained from $OWB_HOME /owb/jrt/config/ directory. You need to copy the file to $AS_HOME/j2ee/home/config directory.This properties file takes effect when the setting km-security is set to true in Control Center Agent. By default the ALLOWED_CMD is commented out in ct_permissions.properties file. This prevents all system command from being invoked from scripts executed in Control Center Agent (when km-security is set to true). To allow certain system commands to be invoked, ALLOWED_CMD needs to be uncommented out, and the system commands (allowed to be invoked) need to be added to the ALLOWED_CMD. Set up Security Roles for Control Center Agent You can set up the Control Center Agent security roles through Oracle Enterprise Manager. In a web browser, navigate to Enterprise Manager Homepage (e.g. http://hostname:8889/em). 1. Log in using the oc4jadmin credentials. After the Cluster Topology page is loaded, click home (the OC4J instance). This takes you to the home page of the OC4J instance. On the OC4J home screen, click the Administration tab. On the Administration Tasks screen, expand Security. Click the task icon next to Security Providers. 2. On Security Providers page click on the button “Instance Level Security”. On Instance Level Security page, go to “Realms” tab. You will see a row for the default realm “jazn.com” in the results table. It has a “Roles” column and a “Users” column. Click on the number in “Roles” column. In the “Roles” page it will display all the roles available for the realm. Click on “Create” button to create a new role “OWB_J2EE_ EXECUTOR”. 3. On the Add Role screen, enter Name OWB_J2EE_EXECUTOR, and click OK. 4. Follow the same steps as before, and create a new role “OWB_J2EE_OPERATOR”. 5. Assign role “oc4j-administrators” and “OWB_J2EE_EXECUTOR” to the role “OWB_J2EE_OPERATOR” by moving these roles from “Available Roles” and click “OK” to save. 6. Go back to Instance Level Security page and create a new role “OWB_J2EE_ADMINISTRATOR”. 7. Assign roles “OWB_J2EE_ OPERATOR” and “OWB_J2EE_EXECUTOR” to the role “OWB_J2EE_ ADMINISTRATOR” by moving these roles from “Available Roles” and click “OK” to save. 8.Go back to Instance Level Security page. This time, click on the number in “Users” column for the realm “jazn.com”. In the “Users” page, it shows all the users defined for this realm. Locate the user “oc4jadmin” in the results table and click on it. 9. Assign the roles “OWB_J2EE_ADMINISTRATOR” and “oc4j-app-administrators” to this user by moving the role from the “Available Roles” selection box to “Selected Roles” box and click “Apply” to save. 10. Go back to Instance Level Security page and create a new role “OWB_INTERNAL_USERS”, assign no user or role to this role. Simply click “OK” to create this role. Now you have finished creating the security roles required for Control Center Agent. Create JMS Queues You need to create two JMS queues for Control Center Agent: owbQueue and abort_owbQueue. 1. Now go to OC4J home Page. On the OC4J home screen, click the Administration tab. On the Administration Tasks screen, expand Services and then expand Enterprise Messaging Service. Click the task icon next to JMS Destinations. 2. On JMS Destinations page, click “Create New” button to create a new JMS queue. On Add Destination page, choose “Queue” as Destination Type. Put “owbQueue” as Destination Name. Select “In Memory Persistence Only” as the Persistence Type and put “jms/owbQueue” as JNDI Location and click on “OK” to finish. 3. Follow the same instruction as above to create the owb_abortQueue. Now you have finished creating the JMS queues required for Control Center Agent. Install JDBC Drivers to OC4J In order to execute Code Templates using commercial databases other than Oracle, e.g. DB2, SQL Server etc, the corresponding jdbc driver files need to be added to $AS_HOME/j2ee/home/applib directory. 1. To install other JDBC drivers to OC4J, first obtain the .jar file containing the JDBC driver. All the external JDBC drivers .jar files can be found in the directory: $OWB_HOME/owb/lib/ext/. For DB2, the files needed are db2jcc.jar and db2jcc_license_cu.jar. For SQL Server the file is sqljdbc.jar. For sunopsis JDBC drivers, the file needed is snpsxmlo.jar. 2. Copy the required JDBC driver file into the directory $AS_HOME/j2ee/home/applib. Now you have finished the Application Server configuration. To make the configuration to take an effect, you need to restart the Application Server.   Task 2: Deploy the Control Center Agent to the Application Server Now you can deploy the Control Center Agent to the Application Server. In a web browser, navigate to Enterprise Manager Homepage (e.g. http://hostname:8889/em). 1. Log in using the oc4jadmin credentials. After the Cluster Topology page is loaded, click home (the OC4J instance). This takes you to the home page of the OC4J instance. On the OC4J home screen, click the Applications tab. Click Deploy to begin deploying Control Center Agent. 2. On the Deploy: Select Archive screen, under Archive, select Archive is present on local host. Upload the archive to the server where Application Server Control is running. Click Browse and locate the jrt.ear file in the $OWB_HOME/owb/jrt/applications directory. Under Deployment Plan, select Automatically create a new deployment plan. Click Next. 3. Wait for the ear file to be uploaded to Application Server. On the Deploy: Application Attributes screen, enter Application Name jrt, and Context Root jrt. Leave the other attributes at their default values. Click Next. 4. On Deploy: Deployment Settings screen, leave all attributes at their default values, and click Deploy. This will take about 1 minute or so and when the application is deployed successfully, a confirmation message will be displayed. Now the Control Center Agent is started automatically. Go back to OC4J home page and click on Applications tab to make sure the deployed application jrt is showing in the applications list.   Task 3: Optional Configuration Tasks The optional configuration tasks contain: · Secure Control Center Agent Web Service · Setting the PATH Environment Variable Secure Control Center Agent Web Service If you want to use JRTWebService with a secure website, you need to do the following steps, 1. Create a file “secure-web-site.xml” in the $AS_HOME/j2ee/home/config directory. The file can be obtained from $OWB_HOME/owb/jrt/config directory. A sample secure-web-site.xml is shown as below. We need to modify the “protocol” to “https”, and “secure” to “true”, also choose an port as the secure http port. Also we need to add the entry “ssl-config” in the file. Remember to use the absolute path for the key store file. 2. Modify the file “server.xml” that is located at $AS_HOME/j2ee/home/config directory. Then add the <web-site> element in the file for the secure-web-site. 3. Create a key store file “serverkeystore.jks” in the $AS_HOME/j2ee/home/config directory. The file can be obtained from $OWB_HOME/owb/jrt/config directory. After the three files are altered, restart the application server. Now you can access the JRTWebService in SSL way through https://hostname:4443/jrt/webservice. Setting the PATH Environment Variable Sometimes, some system commands such as linux ls, sh etc, can not be executed successfully during the script execution due to they are not found in PATH. To ensure they work normally, you can setup the environment variable PATH. Let’s navigate to the Enterprise Manager Homepage. 1. Go to OC4J home screen and click the Administration tab. Expand Administration Tasks, then expand Properties. Click the task icon next to Server Properties. 2. On the Server Properties screen, scroll down to Environment Variables section. Under Environment Variables, click Add Another Row. Enter PATH in Name, and fill Value with directories that contain the system commands. Click Apply.   After you work through this article, I believe you have developed a deeper understanding of the Control Center Agent installation process, and you can apply this knowledge in other installation plan such as Control Center Agent installation on Standalone OC4J.

  Read the article

• Synchronize Data between a Silverlight ListBox and a User Control

  - by psheriff

  One of the great things about XAML is the powerful data-binding capabilities. If you load up a list box with a collection of objects, you can display detail data about each object without writing any C# or VB.NET code. Take a look at Figure 1 that shows a collection of Product objects in a list box. When you click on a list box you bind the current Product object selected in the list box to a set of controls in a user control with just a very simple Binding statement in XAML.  Figure 1: Synchronizing a ListBox to a User Control is easy with Data Binding Product and Products Classes To illustrate this data binding feature I am going to just create some local data instead of using a WCF service. The code below shows a Product class that has three properties, namely, ProductId, ProductName and Price. This class also has a constructor that takes 3 parameters and allows us to set the 3 properties in an instance of our Product class. C#public class Product{  public Product(int productId, string productName, decimal price)  {    ProductId = productId;    ProductName = productName;    Price = price;  }   public int ProductId { get; set; }  public string ProductName { get; set; }  public decimal Price { get; set; }} VBPublic Class Product  Public Sub New(ByVal _productId As Integer, _                 ByVal _productName As String, _                 ByVal _price As Decimal)    ProductId = _productId    ProductName = _productName    Price = _price  End Sub   Private mProductId As Integer  Private mProductName As String  Private mPrice As Decimal   Public Property ProductId() As Integer    Get      Return mProductId    End Get    Set(ByVal value As Integer)      mProductId = value    End Set  End Property   Public Property ProductName() As String    Get      Return mProductName    End Get    Set(ByVal value As String)      mProductName = value    End Set  End Property   Public Property Price() As Decimal    Get      Return mPrice    End Get    Set(ByVal value As Decimal)      mPrice = value    End Set  End PropertyEnd Class To fill up a list box you need a collection class of Product objects. The code below creates a generic collection class of Product objects. In the constructor of the Products class I have hard-coded five product objects and added them to the collection. In a real-world application you would get your data through a call to service to fill the list box, but for simplicity and just to illustrate the data binding, I am going to just hard code the data. C#public class Products : List<Product>{  public Products()  {    this.Add(new Product(1, "Microsoft VS.NET 2008", 1000));    this.Add(new Product(2, "Microsoft VS.NET 2010", 1000));    this.Add(new Product(3, "Microsoft Silverlight 4", 1000));    this.Add(new Product(4, "Fundamentals of N-Tier eBook", 20));    this.Add(new Product(5, "ASP.NET Security eBook", 20));  }} VBPublic Class Products  Inherits List(Of Product)   Public Sub New()    Me.Add(New Product(1, "Microsoft VS.NET 2008", 1000))    Me.Add(New Product(2, "Microsoft VS.NET 2010", 1000))    Me.Add(New Product(3, "Microsoft Silverlight 4", 1000))    Me.Add(New Product(4, "Fundamentals of N-Tier eBook", 20))    Me.Add(New Product(5, "ASP.NET Security eBook", 20))  End SubEnd Class The Product Detail User Control Below is a user control (named ucProduct) that is used to display the product detail information seen in the bottom portion of Figure 1. This is very basic XAML that just creates a text block and a text box control for each of the three properties in the Product class. Notice the {Binding Path=[PropertyName]} on each of the text box controls. This means that if the DataContext property of this user control is set to an instance of a Product class, then the data in the properties of that Product object will be displayed in each of the text boxes. <UserControl x:Class="SL_SyncListBoxAndUserControl_CS.ucProduct"  xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"  HorizontalAlignment="Left"  VerticalAlignment="Top">  <Grid Margin="4">    <Grid.RowDefinitions>      <RowDefinition Height="Auto" />      <RowDefinition Height="Auto" />      <RowDefinition Height="Auto" />    </Grid.RowDefinitions>    <Grid.ColumnDefinitions>      <ColumnDefinition MinWidth="120" />      <ColumnDefinition />    </Grid.ColumnDefinitions>    <TextBlock Grid.Row="0"               Grid.Column="0"               Text="Product Id" />    <TextBox Grid.Row="0"             Grid.Column="1"             Text="{Binding Path=ProductId}" />    <TextBlock Grid.Row="1"               Grid.Column="0"               Text="Product Name" />    <TextBox Grid.Row="1"             Grid.Column="1"             Text="{Binding Path=ProductName}" />    <TextBlock Grid.Row="2"               Grid.Column="0"               Text="Price" />    <TextBox Grid.Row="2"             Grid.Column="1"             Text="{Binding Path=Price}" />  </Grid></UserControl> Synchronize ListBox with User Control You are now ready to fill the list box with the collection class of Product objects and then bind the SelectedItem of the list box to the Product detail user control. The XAML below is the complete code for Figure 1. <UserControl x:Class="SL_SyncListBoxAndUserControl_CS.MainPage"  xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"  xmlns:src="clr-namespace:SL_SyncListBoxAndUserControl_CS"  VerticalAlignment="Top"  HorizontalAlignment="Left">  <UserControl.Resources>    <src:Products x:Key="productCollection" />  </UserControl.Resources>  <Grid x:Name="LayoutRoot"        Margin="4"        Background="White">    <Grid.RowDefinitions>      <RowDefinition Height="Auto" />      <RowDefinition Height="*" />    </Grid.RowDefinitions>    <ListBox x:Name="lstData"             Grid.Row="0"             BorderBrush="Black"             BorderThickness="1"             ItemsSource="{Binding                   Source={StaticResource productCollection}}"             DisplayMemberPath="ProductName" />    <src:ucProduct x:Name="prodDetail"                   Grid.Row="1"                   DataContext="{Binding ElementName=lstData,                                          Path=SelectedItem}" />  </Grid></UserControl> The first step to making this happen is to reference the Silverlight project (SL_SyncListBoxAndUserControl_CS) where the Product and Products classes are located. I added this namespace and assigned it a namespace prefix of “src” as shown in the line below: xmlns:src="clr-namespace:SL_SyncListBoxAndUserControl_CS" Next, to use the data from an instance of the Products collection, you create a UserControl.Resources section in the XAML and add a tag that creates an instance of the Products class and assigns it a key of “productCollection”.   <UserControl.Resources>    <src:Products x:Key="productCollection" />  </UserControl.Resources> Next, you bind the list box to this productCollection object using the ItemsSource property. You bind the ItemsSource of the list box to the static resource named productCollection. You can then set the DisplayMemberPath attribute of the list box to any property of the Product class that you want. In the XAML below I used the ProductName property. <ListBox x:Name="lstData"         ItemsSource="{Binding             Source={StaticResource productCollection}}"         DisplayMemberPath="ProductName" /> You now need to create an instance of the ucProduct user contol below the list box. You do this by once again referencing the “src” namespace and typing in the name of the user control. You then set the DataContext property on this user control to a binding. The binding uses the ElementName attribute to bind to the list box name, in this case “lstData”. The Path of the data is SelectedItem. These two attributes together tell Silverlight to bind the DataContext to the selected item of the list box. That selected item is a Product object. So, once this is bound, the bindings on each text box in the user control are updated and display the current product information. <src:ucProduct x:Name="prodDetail"               DataContext="{Binding ElementName=lstData,                                      Path=SelectedItem}" /> Summary Once you understand the basics of data binding in XAML, you eliminate a lot code that is otherwise needed to move data into controls and out of controls back into an object. Connecting two controls together is easy by just binding using the ElementName and Path properties of the Binding markup extension. Another good tip out of this blog is use user controls and set the DataContext of the user control to have all of the data on the user control update through the bindings. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "SL – Synchronize List Box Data with User Control" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

  Read the article

• Issues with signal handling [closed]

  - by user34790

  I am trying to actually study the signal handling behavior in multiprocess system. I have a system where there are three signal generating processes generating signals of type SIGUSR1 and SIGUSR1. I have two handler processes that handle a particular type of signal. I have another monitoring process that also receives the signals and then does its work. I have a certain issue. Whenever my signal handling processes generate a signal of a particular type, it is sent to the process group so it is received by the signal handling processes as well as the monitoring processes. Whenever the signal handlers of monitoring and signal handling processes are called, I have printed to indicate the signal handling. I was expecting a uniform series of calls for the signal handlers of the monitoring and handling processes. However, looking at the output I could see like at the beginning the monitoring and signal handling processes's signal handlers are called uniformly. However, after I could see like signal handler processes handlers being called in a burst followed by the signal handler of monitoring process being called in a burst. Here is my code and output #include <iostream> #include <sys/types.h> #include <sys/wait.h> #include <sys/time.h> #include <signal.h> #include <cstdio> #include <stdlib.h> #include <sys/ipc.h> #include <sys/shm.h> #define NUM_SENDER_PROCESSES 3 #define NUM_HANDLER_PROCESSES 4 #define NUM_SIGNAL_REPORT 10 #define MAX_SIGNAL_COUNT 100000 using namespace std; volatile int *usrsig1_handler_count; volatile int *usrsig2_handler_count; volatile int *usrsig1_sender_count; volatile int *usrsig2_sender_count; volatile int *lock_1; volatile int *lock_2; volatile int *lock_3; volatile int *lock_4; volatile int *lock_5; volatile int *lock_6; //Used only by the monitoring process volatile int monitor_count; volatile int usrsig1_monitor_count; volatile int usrsig2_monitor_count; double time_1[NUM_SIGNAL_REPORT]; double time_2[NUM_SIGNAL_REPORT]; //Used only by the main process int total_signal_count; //For shared memory int shmid; const int shareSize = sizeof(int) * (10); double timestamp() { struct timeval tp; gettimeofday(&tp, NULL); return (double)tp.tv_sec + tp.tv_usec / 1000000.; } pid_t senders[NUM_SENDER_PROCESSES]; pid_t handlers[NUM_HANDLER_PROCESSES]; pid_t reporter; void signal_catcher_1(int); void signal_catcher_2(int); void signal_catcher_int(int); void signal_catcher_monitor(int); void signal_catcher_main(int); void terminate_processes() { //Kill the child processes int status; cout << "Time up terminating the child processes" << endl; for(int i=0; i<NUM_SENDER_PROCESSES; i++) { kill(senders[i],SIGKILL); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { kill(handlers[i],SIGKILL); } kill(reporter,SIGKILL); //Wait for the child processes to finish for(int i=0; i<NUM_SENDER_PROCESSES; i++) { waitpid(senders[i], &status, 0); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { waitpid(handlers[i], &status, 0); } waitpid(reporter, &status, 0); } int main(int argc, char *argv[]) { if(argc != 2) { cout << "Required parameters missing. " << endl; cout << "Option 1 = 1 which means run for 30 seconds" << endl; cout << "Option 2 = 2 which means run until 100000 signals" << endl; exit(0); } int option = atoi(argv[1]); pid_t pid; if(option == 2) { if(signal(SIGUSR1, signal_catcher_main) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, signal_catcher_main) == SIG_ERR) { perror("2"); exit(1); } } else { if(signal(SIGUSR1, SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } } if(signal(SIGINT, signal_catcher_int) == SIG_ERR) { perror("3"); exit(1); } /////////////////////////////////////////////////////////////////////////////////////// ////////////////////// Initializing the shared memory ///////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////// cout << "Initializing the shared memory" << endl; if ((shmid=shmget(IPC_PRIVATE,shareSize,IPC_CREAT|0660))< 0) { perror("shmget fail"); exit(1); } usrsig1_handler_count = (int *) shmat(shmid, NULL, 0); usrsig2_handler_count = usrsig1_handler_count + 1; usrsig1_sender_count = usrsig2_handler_count + 1; usrsig2_sender_count = usrsig1_sender_count + 1; lock_1 = usrsig2_sender_count + 1; lock_2 = lock_1 + 1; lock_3 = lock_2 + 1; lock_4 = lock_3 + 1; lock_5 = lock_4 + 1; lock_6 = lock_5 + 1; //Initialize them to be zero *usrsig1_handler_count = 0; *usrsig2_handler_count = 0; *usrsig1_sender_count = 0; *usrsig2_sender_count = 0; *lock_1 = 0; *lock_2 = 0; *lock_3 = 0; *lock_4 = 0; *lock_5 = 0; *lock_6 = 0; cout << "End of initializing the shared memory" << endl; ///////////////////////////////////////////////////////////////////////////////////////////// /////////////////// End of initializing the shared memory /////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////// /////////////////////////////Registering the signal handlers/////////////////////////////// /////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the signal handlers" << endl; for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { if((pid = fork()) == 0) { if(i%2 == 0) { struct sigaction action; action.sa_handler = signal_catcher_1; sigset_t block_mask; action.sa_flags = 0; sigaction(SIGUSR1,&action,NULL); if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } } else { if(signal(SIGUSR1 ,SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } struct sigaction action; action.sa_handler = signal_catcher_2; action.sa_flags = 0; sigaction(SIGUSR2,&action,NULL); } if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } while(true) { pause(); } exit(0); } else { //cout << "Registerd the handler " << pid << endl; handlers[i] = pid; } } cout << "End of registering the signal handlers" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////////End of registering the signal handlers ////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// ///////////////////////////Registering the monitoring process ////////////////////////////////////// //////////////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the monitoring process" << endl; if((pid = fork()) == 0) { struct sigaction action; action.sa_handler = signal_catcher_monitor; sigemptyset(&action.sa_mask); sigset_t block_mask; sigemptyset(&block_mask); sigaddset(&block_mask,SIGUSR1); sigaddset(&block_mask,SIGUSR2); action.sa_flags = 0; action.sa_mask = block_mask; sigaction(SIGUSR1,&action,NULL); sigaction(SIGUSR2,&action,NULL); if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } while(true) { pause(); } exit(0); } else { cout << "Monitor's pid is " << pid << endl; reporter = pid; } cout << "End of registering the monitoring process" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// ////////////////////////End of registering the monitoring process//////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //Sleep to make sure that the monitor and handler processes are well initialized and ready to handle signals sleep(5); ////////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////Registering the signal generators/////////////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// cout << "Registering the signal generators" << endl; for(int i=0; i<NUM_SENDER_PROCESSES; i++) { if((pid = fork()) == 0) { if(signal(SIGUSR1, SIG_IGN) == SIG_ERR) { perror("1"); exit(1); } if(signal(SIGUSR2, SIG_IGN) == SIG_ERR) { perror("2"); exit(1); } if(signal(SIGINT, SIG_DFL) == SIG_ERR) { perror("2"); exit(1); } srand(i); while(true) { int signal_id = rand()%2 + 1; if(signal_id == 1) { killpg(getpgid(getpid()), SIGUSR1); while(__sync_lock_test_and_set(lock_4,1) != 0) { } (*usrsig1_sender_count)++; *lock_4 = 0; } else { killpg(getpgid(getpid()), SIGUSR2); while(__sync_lock_test_and_set(lock_5,1) != 0) { } (*usrsig2_sender_count)++; *lock_5=0; } int r = rand()%10 + 1; double s = (double)r/100; sleep(s); } exit(0); } else { //cout << "Registered the sender " << pid << endl; senders[i] = pid; } } //cout << "End of registering the signal generators" << endl; ///////////////////////////////////////////////////////////////////////////////////////////////////// //////////////////////////End of registering the signal generators/////////////////////////////////// ///////////////////////////////////////////////////////////////////////////////////////////////////// //Either sleep for 30 seconds and terminate the program or if the number of signals generated reaches 10000, terminate the program if(option = 1) { sleep(90); terminate_processes(); } else { while(true) { if(total_signal_count >= MAX_SIGNAL_COUNT) { terminate_processes(); } else { sleep(0.001); } } } } void signal_catcher_1(int the_sig) { while(__sync_lock_test_and_set(lock_1,1) != 0) { } (*usrsig1_handler_count) = (*usrsig1_handler_count) + 1; cout << "Signal Handler 1 " << *usrsig1_handler_count << endl; __sync_lock_release(lock_1); } void signal_catcher_2(int the_sig) { while(__sync_lock_test_and_set(lock_2,1) != 0) { } (*usrsig2_handler_count) = (*usrsig2_handler_count) + 1; __sync_lock_release(lock_2); } void signal_catcher_main(int the_sig) { while(__sync_lock_test_and_set(lock_6,1) != 0) { } total_signal_count++; *lock_6 = 0; } void signal_catcher_int(int the_sig) { for(int i=0; i<NUM_SENDER_PROCESSES; i++) { kill(senders[i],SIGKILL); } for(int i=0; i<NUM_HANDLER_PROCESSES; i++) { kill(handlers[i],SIGKILL); } kill(reporter,SIGKILL); exit(3); } void signal_catcher_monitor(int the_sig) { cout << "Monitoring process " << *usrsig1_handler_count << endl; } Here is the initial segment of output Monitoring process 0 Monitoring process 0 Monitoring process 0 Monitoring process 0 Signal Handler 1 1 Monitoring process 2 Signal Handler 1 2 Signal Handler 1 3 Signal Handler 1 4 Monitoring process 4 Monitoring process Signal Handler 1 6 Signal Handler 1 7 Monitoring process 7 Monitoring process 8 Monitoring process 8 Signal Handler 1 9 Monitoring process 9 Monitoring process 9 Monitoring process 10 Signal Handler 1 11 Monitoring process 11 Monitoring process 12 Signal Handler 1 13 Signal Handler 1 14 Signal Handler 1 15 Signal Handler 1 16 Signal Handler 1 17 Signal Handler 1 18 Monitoring process 19 Signal Handler 1 20 Monitoring process 20 Signal Handler 1 21 Monitoring process 21 Monitoring process 21 Monitoring process 22 Monitoring process 22 Monitoring process 23 Signal Handler 1 24 Signal Handler 1 25 Monitoring process 25 Signal Handler 1 27 Signal Handler 1 28 Signal Handler 1 29 Here is the segment when the signal handler processes signal handlers are called in a burst Signal Handler 1 456 Signal Handler 1 457 Signal Handler 1 458 Signal Handler 1 459 Signal Handler 1 460 Signal Handler 1 461 Signal Handler 1 462 Signal Handler 1 463 Signal Handler 1 464 Signal Handler 1 465 Signal Handler 1 466 Signal Handler 1 467 Signal Handler 1 468 Signal Handler 1 469 Signal Handler 1 470 Signal Handler 1 471 Signal Handler 1 472 Signal Handler 1 473 Signal Handler 1 474 Signal Handler 1 475 Signal Handler 1 476 Signal Handler 1 477 Signal Handler 1 478 Signal Handler 1 479 Signal Handler 1 480 Signal Handler 1 481 Signal Handler 1 482 Signal Handler 1 483 Signal Handler 1 484 Signal Handler 1 485 Signal Handler 1 486 Signal Handler 1 487 Signal Handler 1 488 Signal Handler 1 489 Signal Handler 1 490 Signal Handler 1 491 Signal Handler 1 492 Signal Handler 1 493 Signal Handler 1 494 Signal Handler 1 495 Signal Handler 1 496 Signal Handler 1 497 Signal Handler 1 498 Signal Handler 1 499 Signal Handler 1 500 Signal Handler 1 501 Signal Handler 1 502 Signal Handler 1 503 Signal Handler 1 504 Signal Handler 1 505 Signal Handler 1 506 Here is the segment when the monitoring processes signal handlers are called in a burst Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Monitoring process 140 Why isn't it uniform afterwards. Why are they called in a burst?

  Read the article

• R Package Installation with Oracle R Enterprise

  - by Sherry LaMonica-Oracle

  Normal 0 false false false EN-US X-NONE X-NONE Programming languages give developers the opportunity to write reusable functions and to bundle those functions into logical deployable entities. In R, these are called packages. R has thousands of such packages provided by an almost equally large group of third-party contributors. To allow others to benefit from these packages, users can share packages on the CRAN system for use by the vast R development community worldwide. R's package system along with the CRAN framework provides a process for authoring, documenting and distributing packages to millions of users. In this post, we'll illustrate the various ways in which such R packages can be installed for use with R and together with Oracle R Enterprise. In the following, the same instructions apply when using either open source R or Oracle R Distribution. In this post, we cover the following package installation scenarios for: R command line Linux shell command line Use with Oracle R Enterprise Installation on Exadata or RAC Installing all packages in a CRAN Task View Troubleshooting common errors 1. R Package Installation BasicsR package installation basics are outlined in Chapter 6 of the R Installation and Administration Guide. There are two ways to install packages from the command line: from the R command line and from the shell command line. For this first example on Oracle Linux using Oracle R Distribution, we’ll install the arules package as root so that packages will be installed in the default R system-wide location where all users can access it, /usr/lib64/R/library.Within R, using the install.packages function always attempts to install the latest version of the requested package available on CRAN:R> install.packages("arules")If the arules package depends upon other packages that are not already installed locally, the R installer automatically downloads and installs those required packages. This is a huge benefit that frees users from the task of identifying and resolving those dependencies.You can also install R from the shell command line. This is useful for some packages when an internet connection is not available or for installing packages not uploaded to CRAN. To install packages this way, first locate the package on CRAN and then download the package source to your local machine. For example:$ wget http://cran.r-project.org/src/contrib/arules_1.1-2.tar.gz Then, install the package using the command R CMD INSTALL:$ R CMD INSTALL arules_1.1-2.tar.gzA major difference between installing R packages using the R package installer at the R command line and shell command line is that package dependencies must be resolved manually at the shell command line. Package dependencies are listed in the Depends section of the package’s CRAN site. If dependencies are not identified and installed prior to the package’s installation, you will see an error similar to:ERROR: dependency ‘xxx’ is not available for package ‘yyy’As a best practice and to save time, always refer to the package’s CRAN site to understand the package dependencies prior to attempting an installation. If you don’t run R as root, you won’t have permission to write packages into the default system-wide location and you will be prompted to create a personal library accessible by your userid. You can accept the personal library path chosen by R, or specify the library location by passing parameters to the install.packages function. For example, to create an R package repository in your home directory: R> install.packages("arules", lib="/home/username/Rpackages")or$ R CMD INSTALL arules_1.1-2.tar.gz --library=/home/username/RpackagesRefer to the install.packages help file in R or execute R CMD INSTALL --help at the shell command line for a full list of command line options.To set the library location and avoid having to specify this at every package install, simply create the R startup environment file .Renviron in your home area if it does not already exist, and add the following piece of code to it:R_LIBS_USER = "/home/username/Rpackages" 2. Setting the RepositoryEach time you install an R package from the R command line, you are asked which CRAN mirror, or server, R should use. To set the repository and avoid having to specify this during every package installation, create the R startup command file .Rprofile in your home directory and add the following R code to it:cat("Setting Seattle repository")r = getOption("repos") r["CRAN"] = "http://cran.fhcrc.org/"options(repos = r)rm(r) This code snippet sets the R package repository to the Seattle CRAN mirror at the start of each R session. 3. Installing R Packages for use with Oracle R EnterpriseEmbedded R execution with Oracle R Enterprise allows the use of CRAN or other third-party R packages in user-defined R functions executed on the Oracle Database server. The steps for installing and configuring packages for use with Oracle R Enterprise are the same as for open source R. The database-side R engine just needs to know where to find the R packages.The Oracle R Enterprise installation is performed by user oracle, which typically does not have write permission to the default site-wide library, /usr/lib64/R/library. On Linux and UNIX platforms, the Oracle R Enterprise Server installation provides the ORE script, which is executed from the operating system shell to install R packages and to start R. The ORE script is a wrapper for the default R script, a shell wrapper for the R executable. It can be used to start R, run batch scripts, and build or install R packages. Unlike the default R script, the ORE script installs packages to a location writable by user oracle and accessible by all ORE users - $ORACLE_HOME/R/library.To install a package on the database server so that it can be used by any R user and for use in embedded R execution, an Oracle DBA would typically download the package source from CRAN using wget. If the package depends on any packages that are not in the R distribution in use, download the sources for those packages, also.  For a single Oracle Database instance, replace the R script with ORE to install the packages in the same location as the Oracle R Enterprise packages. $ wget http://cran.r-project.org/src/contrib/arules_1.1-2.tar.gz$ ORE CMD INSTALL arules_1.1-2.tar.gzBehind the scenes, the ORE script performs the equivalent of setting R_LIBS_USER to the value of $ORACLE_HOME/R/library, and all R packages installed with the ORE script are installed to this location. For installing a package on multiple database servers, such as those in an Oracle Real Application Clusters (Oracle RAC) or a multinode Oracle Exadata Database Machine environment, use the ORE script in conjunction with the Exadata Distributed Command Line Interface (DCLI) utility.$ dcli -g nodes -l oracle ORE CMD INSTALL arules_1.1-1.tar.gz The DCLI -g flag designates a file containing a list of nodes to install on, and the -l flag specifies the user id to use when executing the commands. For more information on using DCLI with Oracle R Enterprise, see Chapter 5 in the Oracle R Enterprise Installation Guide.If you are using an Oracle R Enterprise client, install the package the same as any R package, bearing in mind that you must install the same version of the package on both the client and server machines to avoid incompatibilities. 4. CRAN Task ViewsCRAN also maintains a set of Task Views that identify packages associated with a particular task or methodology. Task Views are helpful in guiding users through the huge set of available R packages. They are actively maintained by volunteers who include detailed annotations for routines and packages. If you find one of the task views is a perfect match, you can install every package in that view using the ctv package - an R package for automating package installation. To use the ctv package to install a task view, first, install and load the ctv package.R> install.packages("ctv")R> library(ctv)Then query the names of the available task views and install the view you choose.R> available.views() R> install.views("TimeSeries") 5. Using and Managing R packages To use a package, start up R and load packages one at a time with the library command.Load the arules package in your R session. R> library(arules)Verify the version of arules installed.R> packageVersion("arules")[1] '1.1.2'Verify the version of arules installed on the database server using embedded R execution.R> ore.doEval(function() packageVersion("arules"))View the help file for the apropos function in the arules packageR> ?aproposOver time, your package repository will contain more and more packages, especially if you are using the system-wide repository where others are adding additional packages. It’s good to know the entire set of R packages accessible in your environment. To list all available packages in your local R session, use the installed.packages command:R> myLocalPackages <- row.names(installed.packages())R> myLocalPackagesTo access the list of available packages on the ORE database server from the ORE client, use the following embedded R syntax: R> myServerPackages <- ore.doEval(function() row.names(installed.packages()) R> myServerPackages 6. Troubleshooting Common ProblemsInstalling Older Versions of R packagesIf you immediately upgrade to the latest version of R, you will have no problem installing the most recent versions of R packages. However, if your version of R is older, some of the more recent package releases will not work and install.packages will generate a message such as: Warning message: In install.packages("arules") : package ‘arules’ is not availableThis is when you have to go to the Old sources link on the CRAN page for the arules package and determine which version is compatible with your version of R.Begin by determining what version of R you are using:$ R --versionOracle Distribution of R version 3.0.1 (--) -- "Good Sport" Copyright (C) The R Foundation for Statistical Computing Platform: x86_64-unknown-linux-gnu (64-bit)Given that R-3.0.1 was released May 16, 2013, any version of the arules package released after this date may work. Scanning the arules archive, we might try installing version 0.1.1-1, released in January of 2014:$ wget http://cran.r-project.org/src/contrib/Archive/arules/arules_1.1-1.tar.gz$ R CMD INSTALL arules_1.1-1.tar.gzFor use with ORE:$ ORE CMD INSTALL arules_1.1-1.tar.gzThe "package not available" error can also be thrown if the package you’re trying to install lives elsewhere, either another R package site, or it’s been removed from CRAN. A quick Google search usually leads to more information on the package’s location and status.Oracle R Enterprise is not in the R library pathOn Linux hosts, after installing the ORE server components, starting R, and attempting to load the ORE packages, you may receive the error:R> library(ORE)Error in library(ORE) : there is no package called ‘ORE’If you know the ORE packages have been installed and you receive this error, this is the result of not starting R with the ORE script. To resolve this problem, exit R and restart using the ORE script. After restarting R and ">running the command to load the ORE packages, you should not receive any errors.$ ORER> library(ORE)On Windows servers, the solution is to make the location of the ORE packages visible to R by adding them to the R library paths. To accomplish this, exit R, then add the following lines to the .Rprofile file. On Windows, the .Rprofile file is located in R\etc directory C:\Program Files\R\R-<version>\etc. Add the following lines:.libPaths("<path to $ORACLE_HOME>/R/library")The above line will tell R to include the R directory in the Oracle home as part of its search path. When you start R, the path above will be included, and future R package installations will also be saved to $ORACLE_HOME/R/library. This path should be writable by the user oracle, or the userid for the DBA tasked with installing R packages.Binary package compiled with different version of RBy default, R will install pre-compiled versions of packages if they are found. If the version of R under which the package was compiled does not match your installed version of R you will get an error message:Warning message: package ‘xxx’ was built under R version 3.0.0The solution is to download the package source and build it for your version of R.$ wget http://cran.r-project.org/src/contrib/Archive/arules/arules_1.1-1.tar.gz$ R CMD INSTALL arules_1.1-1.tar.gzFor use with ORE:$ ORE CMD INSTALL arules_1.1-1.tar.gzUnable to execute files in /tmp directoryBy default, R uses the /tmp directory to install packages. On security conscious machines, the /tmp directory is often marked as "noexec" in the /etc/fstab file. This means that no file under /tmp can ever be executed, and users who attempt to install R package will receive an error:ERROR: 'configure' exists but is not executable -- see the 'R Installation and Administration Manual’The solution is to set the TMP and TMPDIR environment variables to a location which R will use as the compilation directory. For example:$ mkdir <some path>/tmp$ export TMPDIR= <some path>/tmp$ export TMP= <some path>/tmpThis error typically appears on Linux client machines and not database servers, as Oracle Database writes to the value of the TMP environment variable for several tasks, including holding temporary files during database installation. 7. Creating your own R packageCreating your own package and submitting to CRAN is for advanced users, but it is not difficult. The procedure to follow, along with details of R's package system, is detailed in the Writing R Extensions manual.

  Read the article

• Fedora 16 can connect to samba share using smbclient but not in nautilus 3.2.1

  - by Nathan Jones

  I have a machine running Ubuntu 11.10 Server acting as a Samba server to share my home directory. Everything works fine on my Windows 7 machine, but on my Fedora 16 laptop, if I use Nautilus to try to access the share using smb://192.168.0.8/nathan in the location bar, it just has the loading cursor and does nothing. It never shows any errors, nothing. Using smbclient works just fine, but I'd like to get it working in Nautilus. I know that there can be problems with SELinux and Samba, so I created a file called booleans.local that contains samba_enable_home_dirs=1. My smb.conf file looks like this: # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections map to guest = bad user ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones usershare allow guests = yes #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username [homes] comment = Home Directories browseable = yes # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. read only = no # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0775 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0775 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = no create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom smbusers: <nathan> = <"nathan"> Any help would be very much appreciated! Thanks!

  Read the article

• puma init.d for centos 6 fails with runuser: user /var/log/puma.log does not exist

  - by Rubytastic

  Trying to get a init.d/puma to work on Centos 6. It throws error runuser: user /var/log/puma.log does not exist I run this from the /srv/books/current folder but it fails. I tried to debug the values but not quite get what is missing and why it throws this error. #! /bin/sh # puma - this script starts and stops the puma daemon # # chkconfig: - 85 15 # description: Puma # processname: puma # config: /etc/puma.conf # pidfile: /srv/books/current/tmp/pids/puma.pid # Author: Darío Javier Cravero &lt;[email protected]> # # Do NOT "set -e" # Original script https://github.com/puma/puma/blob/master/tools/jungle/puma # It was modified here by Stanislaw Pankevich <[email protected]> # to run on CentOS 5.5 boxes. # Script works perfectly on CentOS 5: script uses its native daemon(). # Puma is being stopped/restarted by sending signals, control app is not used. # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network # Check that networking is up. [ "$NETWORKING" = "no" ] && exit 0 # PATH should only include /usr/* if it runs after the mountnfs.sh script PATH=/usr/local/bin:/usr/local/sbin/:/sbin:/usr/sbin:/bin:/usr/bin DESC="Puma rack web server" NAME=puma DAEMON=$NAME SCRIPTNAME=/etc/init.d/$NAME CONFIG=/etc/puma.conf JUNGLE=`cat $CONFIG` RUNPUMA=/usr/local/bin/run-puma # Skipping the following non-CentOS string # Load the VERBOSE setting and other rcS variables # . /lib/init/vars.sh # CentOS does not have these functions natively log_daemon_msg() { echo "$@"; } log_end_msg() { [ $1 -eq 0 ] && RES=OK; logger ${RES:=FAIL}; } # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions # # Function that performs a clean up of puma.* files # cleanup() { echo "Cleaning up puma temporary files..." echo $1; PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state SOCKFILE=$1/tmp/puma/puma.sock rm -f $PIDFILE $STATEFILE $SOCKFILE } # # Function that starts the jungle # do_start() { log_daemon_msg "=> Running the jungle..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/puma/config.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/puma/puma.log" fi do_start_one $dir $user $config_file $log_file done } do_start_one() { PIDFILE=$1/puma/puma.pid if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` # If the puma isn't running, run it, otherwise restart it. if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then do_start_one_do $1 $2 $3 $4 else do_restart_one $1 fi else do_start_one_do $1 $2 $3 $4 fi } do_start_one_do() { log_daemon_msg "--> Woke up puma $1" log_daemon_msg "user $2" log_daemon_msg "log to $4" cleanup $1; daemon --user $2 $RUNPUMA $1 $3 $4 } # # Function that stops the jungle # do_stop() { log_daemon_msg "=> Putting all the beasts to bed..." for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_stop_one $dir done } # # Function that stops the daemon/service # do_stop_one() { log_daemon_msg "--> Stopping $1" PIDFILE=$1/tmp/puma/puma.pid STATEFILE=$1/tmp/puma/puma.state echo $PIDFILE if [ -e $PIDFILE ]; then PID=`cat $PIDFILE` echo "Pid:" echo $PID if [ "`ps -A -o pid= | grep -c $PID`" -eq 0 ]; then log_daemon_msg "---> Puma $1 isn't running." else log_daemon_msg "---> About to kill PID `cat $PIDFILE`" # pumactl --state $STATEFILE stop # Many daemons don't delete their pidfiles when they exit. kill -9 $PID fi cleanup $1 else log_daemon_msg "---> No puma here..." fi return 0 } # # Function that restarts the jungle # do_restart() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_restart_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_restart_one() { PIDFILE=$1/tmp/puma/puma.pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to restart puma $1" # pumactl --state $dir/tmp/puma/state restart kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> Your puma was never playing... Let's get it out there first" user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi return 0 } # # Function that statuss then jungle # do_status() { for i in $JUNGLE; do dir=`echo $i | cut -d , -f 1` do_status_one $dir done } # # Function that sends a SIGUSR2 to the daemon/service # do_status_one() { PIDFILE=$1/tmp/puma/pid i=`grep $1 $CONFIG` dir=`echo $i | cut -d , -f 1` if [ -e $PIDFILE ]; then log_daemon_msg "--> About to status puma $1" pumactl --state $dir/tmp/puma/state stats # kill -s USR2 `cat $PIDFILE` # TODO Check if process exist else log_daemon_msg "--> $1 isn't there :(..." fi return 0 } do_add() { str="" # App's directory if [ -d "$1" ]; then if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then str=$1 else echo "The app is already being managed. Remove it if you want to update its config." exit 1 fi else echo "The directory $1 doesn't exist." exit 1 fi # User to run it as if [ "`grep -c "^$2:" /etc/passwd`" -eq 0 ]; then echo "The user $2 doesn't exist." exit 1 else str="$str,$2" fi # Config file if [ "$3" != "" ]; then if [ -e $3 ]; then str="$str,$3" else echo "The config file $3 doesn't exist." exit 1 fi fi # Log file if [ "$4" != "" ]; then str="$str,$4" fi # Add it to the jungle echo $str >> $CONFIG log_daemon_msg "Added a Puma to the jungle: $str. You still have to start it though." } do_remove() { if [ "`grep -c "^$1" $CONFIG`" -eq 0 ]; then echo "There's no app $1 to remove." else # Stop it first. do_stop_one $1 # Remove it from the config. sed -i "\\:^$1:d" $CONFIG log_daemon_msg "Removed a Puma from the jungle: $1." fi } case "$1" in start) [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_start else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` user=`echo $i | cut -d , -f 2` config_file=`echo $i | cut -d , -f 3` if [ "$config_file" = "" ]; then config_file="$dir/config/puma.rb" fi log_file=`echo $i | cut -d , -f 4` if [ "$log_file" = "" ]; then log_file="$dir/log/puma.log" fi do_start_one $dir $user $config_file $log_file fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; stop) [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_stop else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_stop_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; status) # TODO Implement. log_daemon_msg "Status $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_status else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_status_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; restart) log_daemon_msg "Restarting $DESC" "$NAME" if [ "$#" -eq 1 ]; then do_restart else i=`grep $2 $CONFIG` dir=`echo $i | cut -d , -f 1` do_restart_one $dir fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; add) if [ "$#" -lt 3 ]; then echo "Please, specifiy the app's directory and the user that will run it at least." echo " Usage: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." exit 1 else do_add $2 $3 $4 $5 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; remove) if [ "$#" -lt 2 ]; then echo "Please, specifiy the app's directory to remove." exit 1 else do_remove $2 fi case "$?" in 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;; 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;; esac ;; *) echo "Usage:" >&2 echo " Run the jungle: $SCRIPTNAME {start|stop|status|restart}" >&2 echo " Add a Puma: $SCRIPTNAME add /path/to/app user /path/to/app/config/puma.rb /path/to/app/config/log/puma.log" echo " config and log are optionals." echo " Remove a Puma: $SCRIPTNAME remove /path/to/app" echo " On a Puma: $SCRIPTNAME {start|stop|status|restart} PUMA-NAME" >&2 exit 3 ;; esac :

  Read the article

• Device being used by VxVM

  - by Onur Bingul

  If you are using vxvm, you may have issues when you try to unconfigure a disk root@techsupport2 # cfgadm -c unconfigure c1::dsk/c1t3d0cfgadm: Component system is busy, try again: failed to offline:     Resource             Information       ----------------       -------------------------/dev/dsk/c1t3d0   Device being used by VxVM“cfgadm unconfigure” command fails here.The way to resolve this is to disable the disks path from DMP control. Since there is only one path to this disk, the “-f” (for force) option needs to be used:root@techsupport2 # vxdmpadm -f disable path=c1t3d0s2root@techsupport2 # vxdmpadm getsubpaths NAME         STATE[A]   PATH-TYPE[M] DMPNODENAME  ENCLR-NAME   CTLR   ATTRS================================================================================c1t6d0       ENABLED(A)   -          disk_0       disk         c1       -c1t3d0       DISABLED(M)   -          disk_1       disk         c1       -c1t0d0s2     ENABLED(A)   -          disk_2       disk         c1       -c1t1d0       ENABLED(A)   -          disk_3       disk         c1       -c3t47d0      ENABLED(A)   -          sun35100_0   sun35100     c3       -c3t47d1      ENABLED(A)   -          sun35100_1   sun35100     c3       -c3t47d2s2    ENABLED(A)   -          sun35100_2   sun35100     c3       -c3t47d3s2    ENABLED(A)   -          sun35100_3   sun35100     c3       -You can see the path now disabled from DMP.root@techsupport2 # cfgadm -c unconfigure c1::dsk/c1t3d0Now you can unconfigure the disk

  Read the article

• MEB Support to NetBackup MMS

  - by Hema Sridharan

  In MySQL Enterprise Backup 3.6, new option was introduced to support backup to tapes via SBT interface. SBT stands for System Backup to Tape, an Oracle API that helps to perform backup and restore jobs via media management software such as Oracle's Secure Backup (OSB). There are other storage managers like IBM's Tivoli Storage Manager (TSM) and Symantec's Netbackup (NB) which are also supported by MEB but we don't guarantee that it will function as expected for every release. MEB supports SBT API version 2.0 In this blog, I am primarily going to focus the interface of MEB and Symantec's NB. If we are using tapes for backup, ensure that tape library and tape drives are compatible. Test Setup 1. Install NB 7.5 master and media servers in Linux OS. ( NB 7.1 can also be used but for testing purpose I used NB 7.5)2. Install MEB 3.8 also in Linux OS.3. Install NB admin console in your windows desktop and configure the NB master server from there. Note: Ensure that you have root user permission to install NetBackup. Configuration Steps for MEB and NB Once MEB and NB are installed, Ensure that NB is linked to MEB by specifying the library /usr/openv/netbackup/bin/libobk.so64 in the mysqlbackup command line using --sbt-lib-path. Configure the NB master server from windows console. That is configure the storage units by specifying the Storage unit name, Disk type, Media Server name etc.  Create NetBackup policies that are user selectable. But please make sure that policy type is "Oracle".  Define the clients where MEB will be executed. Some times this will be different host where MEB is run or some times in same Media server where NB and tapes are attached. Now once the installation and configuration steps are performed for MEB and NB, the next part is the actual execution.MEB should be run as single file backup using --backup-image option with prefix sbt:(it is a tag which tells MEB that it should stream the backup image through the SBT interface) which is sent to NB client via SBT interface . The resulting backup image is stored where NB stores the images that it backs up. The following diagram shows how MEB interacts with MMS through SBT interface. Backup The following parameters should also be ready for the execution,    --sbt-lib-path : Path to SBT library specific to NetBackup MMS. SBT lib for NetBackup  is in /usr/openv/netbackup/bin/libobk.so64    --sbt-environment: Environment variables must be defined specific to NetBackup. In our example below, we use     NB_ORA_SERV=myserver.com,    NB_ORA_CLIENT=myserver.com,    NB_ORA_POLICY=NBU-MEB    ORACLE_HOME = /export/home2/tmp/hema/mysql-server/ ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ./mysqlbackup --port=13000 --protocol=tcp --user=root --backup-image=sbt:bkpsbtNB --sbt-lib-path=/usr/openv/netbackup/bin/libobk.so64 --sbt-environment="NB_ORA_SERV=myserver.com, NB_ORA_CLIENT=myserver.com, NB_ORA_POLICY=NBU-MEB, ORACLE_HOME=/export/home2/tmp/hema/mysql-server/” --backup-dir=/export/home2/tmp/hema/MEB_bkdir/ backup-to-image ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Once backup is completed successfully, this should appear in Activity Monitor in NetBackup Console.For restore,  image contents has to be extracted using image-to-backup-dir command and then apply-log and copy-back steps are applied. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ./mysqlbackup --sbt-lib-path=/usr/openv/netbackup/bin/libobk.so64  --backup-dir=/export/home2/tmp/hema/NBMEB/ --backup-image=sbt:bkpsbtNB image-to-backup-dir-----------------------------------------------------------------------------------------------------------------------------------Now apply logs as usual, shutdown the server and perform restore, restart the server and check the data contents. ./mysqlbackup   ---backup-dir=/export/home2/tmp/hema/NBMEB/  apply-log ./mysqlbackup --datadir=/export/home2/tmp/hema/mysql-server/mysql-5.5-meb-repo/mysql-test/var/mysqld.1/data/  --backup-dir=/export/home2/tmp/hema/MEB_bkpdir/ innodb_log_files_in_group=2 --innodb_log_file_size=5M --user=root --port=13000 --protocol=tcp copy-back The NB console should show 'Restore" job as done. If you don't see that there is something wrong with MEB or NetBackup.You can also refer to more detailed steps of MEB and NB integration in whitepaper here

  Read the article

• Some PowerShell goodness

  - by KyleBurns

  Ever work somewhere where processes dump files into folders to maintain an archive?  Me too and Windows Explorer hates it.  Very often I find myself needing to organize these files into subfolders so that I can go after files without locking up Windows Explorer and my answer used to be to write a program in something like C# to do the job.  These programs will typically enumerate the files in a folder and move each file to a subdirectory named based on a datestamp.  The last such program I wrote had to use lower-level Win32 API calls to perform the enumeration because it appears the standard .Net calls make use of the same method of enumerating the directories that Windows Explorer chokes on when dealing with a large number of entries in a particular directory, so a simple task was accomplished with a lot of code. Of course, this little utility was just something I used to make my life easier and "not a production app", so it was in my local source folder and not source control when my hard drive died.  So... I was getting ready to re-create it and thought it might be a good idea to play with PowerShell a bit - something I had been wanting to do but had not yet met a requirement to make me do it.  The resulting script was amazingly succinct and even building the flexibility for parameterization and adding line breaks for readability was only about 25 lines long.  Here's the code with discussion following: param(     [Parameter(         Mandatory = $false,         Position = 0,         HelpMessage = "Root of the folders or share to archive.  Be sure to end with appropriate path separator"     )]     [String] $folderRoot="\\fileServer\pathToFolderWithLotsOfFiles\",       [Parameter(         Mandatory = $false,         Position = 1     )]     [int] $days = 1 ) dir $folderRoot|?{(!($_.PsIsContainer)) -and ((get-date) - $_.lastwritetime).totaldays -gt $days }|%{     [string]$year=$([string]$_.lastwritetime.year)     [string]$month=$_.lastwritetime.month     [string]$day=$_.lastwritetime.day     $dir=$folderRoot+$year+"\"+$month+"\"+$day     if(!(test-path $dir)){         new-item -type container $dir     }     Write-output $_     move-item $_.fullname $dir } The script starts by declaring two parameters.  The first parameter holds the path to the folder that I am going to be sorting into subdirectories.  The path separator is intended to be included in this argument because I didn't want to mess with determining whether this was local or UNC and picking the right separator in code, but this could be easily improved upon using Path.Combine since PowerShell has access to the full framework libraries.  The second parameter holds a minimum age in days for files to be removed from the root folder.  The script then pipes the dir command through a query to include only files (by excluding containers) and of those, only entries that meet the age requirement based on the last modified datestamp.  For each of those, the datestamp is used to construct a folder name in the format YYYY\MM\DD (if you're in an environment where even a day's worth of files need further divided, you could make this more granular) and the folder is created if it does not yet exist.  Finally, the file is moved into the directory. One of the things that was really cool about using PowerShell for this task is that the new-item command is smart enough to create the entire subdirectory structure with a single call.  In previous code that I have written to do this kind of thing, I would have to test the entire tree leading down to the subfolder I want, leading to a lot of branching code that detracted from being able to quickly look at the code and understand the job it performs. Overall, I have to say I'm really pleased with what has been done making PowerShell powerful and useful.

  Read the article

• Mailman Error / Cpanel

  - by Faith In Unseen Things

  Mailman is giving off this error when any changes are made to the list: ======================= Bug in Mailman version 2.1.14 We're sorry, we hit a bug! Please inform the webmaster for this site of this problem. Printing of traceback and other system information has been explicitly inhibited, but the webmaster can find this information in the Mailman error logs. Ran: /usr/local/cpanel/bin/mailman-install --force Then it says at the end: Updating Usenet watermarks - nothing to update here Nothing to do. updating old qfiles cp: cannot remove `/usr/local/cpanel/img-sys/gnu-head-tiny.jpg': Permission denied cp: cannot remove `/usr/local/cpanel/img-sys/mailman-large.jpg': Permission denied cp: cannot remove `/usr/local/cpanel/img-sys/mailman.jpg': Permission denied cp: cannot remove `/usr/local/cpanel/img-sys/mm-icon.png': Permission denied cp: cannot remove `/usr/local/cpanel/img-sys/PythonPowered.png': Permission denied directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/.cpanel (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/ca (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/uk (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/it (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/es (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/en (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/da (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/eu (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/no (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/pl (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/sv (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/tr (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/zh_CN (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/nl (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/fi (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/ast (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/zh_TW (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/ko (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/sk (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/ro (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/ja (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/pt (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/ru (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/ia (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/gl (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/vi (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/lt (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/cs (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/sl (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/pt_BR (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/he (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/hr (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/ar (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/et (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/de (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/fr (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/hu (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/templates/sr (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/.cpanel/caches (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/.cpanel/caches/config (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/ca (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/uk (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/it (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/es (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/da (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/eu (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/no (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/pl (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/sv (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/tr (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/zh_CN (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/nl (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/fi (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/ast (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/zh_TW (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/ko (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/sk (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/ro (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/ja (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/pt (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/ru (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/ia (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/gl (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/vi (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/lt (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/cs (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/sl (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/pt_BR (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/he (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/hr (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/ar (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/et (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/de (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/fr (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/hu (fixing) directory permissions must be 02775: /usr/local/cpanel/3rdparty/mailman/messages/sr (fixing) Warning: Private archive directory is other-executable (o+x). This could allow other users on your system to read private archives. If you're on a shared multiuser system, you should consult the installation manual on how to fix this. Problems found: 76 Re-run as mailman (or root) with -f flag to fix must be privileged to use -u must be privileged to use -u Unable to touch file /var/cpanel/mailman2: Permission denied at /usr/local/cpanel/bin/mailman-install line 275. [2012-04-13 19:33:55 -0500] warn [restartsrv_mailman] 2254: Unable to set RLIMIT_RSS to infinity 2254: Unable to set RLIMIT_AS to infinity at /usr/local/cpanel/Cpanel/Rlimit.pm line 113 Cpanel::Rlimit::set_rlimit_to_infinity() called at /usr/local/cpanel/scripts/restartsrv_mailman line 18 eval {...} called at /usr/local/cpanel/scripts/restartsrv_mailman line 15 warn [restartsrv_mailman] 2254: Unable to set RLIMIT_RSS to infinity 2254: Unable to set RLIMIT_AS to infinity [2012-04-13 19:33:55 -0500] warn [Cpanel::SafeDir::MK] mkdir /var/run/restartsrv/startup failed: Permission denied at /usr/local/cpanel/Cpanel/SafeDir/MK.pm line 153 Cpanel::SafeDir::MK::safemkdir('/var/run/restartsrv/startup', 0700) called at /usr/local/cpanel/Cpanel/RestartSrv.pm line 756 Cpanel::RestartSrv::logged_startup('mailman', 1, ARRAY(0x8fa4bc8)) called at /usr/local/cpanel/scripts/restartsrv_mailman line 47 warn [Cpanel::SafeDir::MK] mkdir /var/run/restartsrv/startup failed: Permission denied [2012-04-13 19:33:55 -0500] warn [restartsrv_mailman] Failed to create /var/run/restartsrv/startup at /usr/local/cpanel/Cpanel/RestartSrv.pm line 759 Cpanel::RestartSrv::logged_startup('mailman', 1, ARRAY(0x8fa4bc8)) called at /usr/local/cpanel/scripts/restartsrv_mailman line 47 warn [restartsrv_mailman] Failed to create /var/run/restartsrv/startup Ran this: /usr/local/cpanel/bin/mailman-install --force -f Same message as above. root@server2 [~]# cat /usr/local/cpanel/3rdparty/mailman/logs/error Apr 13 19:33:55 2012 mailmanctl(2255): PID unreadable in: /usr/local/cpanel/3rdparty/mailman/data/master-qrunner.pid Apr 13 19:33:55 2012 mailmanctl(2255): [Errno 2] No such file or directory: '/usr/local/cpanel/3rdparty/mailman/data/master-qrunner.pid' Apr 13 19:33:55 2012 mailmanctl(2255): Is qrunner even running? root@server2 [~]# /scripts/restartsrv_mailman --status mailmanctl (/usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/mailmanctl --stale-lock-cleanup start) running as mailman with PID 24070 3rdparty/mailman/bin/qrunner (/usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=RetryRunner:0:1 -s) running as mailman with PID 24078 root@server2 [~]# cat /usr/local/cpanel/3rdparty/mailman/data/master-qrunner.pid 24070 root@server2 [~]# ls -lah /usr/local/cpanel/3rdparty/mailman/data/master-qrunner.pid -rw-rw---- 1 mailman mailman 6 Apr 13 19:47 /usr/local/cpanel/3rdparty/mailman/data/master-qrunner.pid root@server2 [~]# ps aux | grep python mailman 4557 0.0 0.1 10484 6044 ? S 19:40 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=RetryRunner:0:1 -s mailman 24070 0.0 0.1 14268 4480 ? Ss 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/mailmanctl --stale-lock-cleanup start mailman 24071 1.1 0.1 14052 6100 ? S 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=ArchRunner:0:1 -s mailman 24072 1.0 0.1 13444 6112 ? S 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=BounceRunner:0:1 -s mailman 24073 1.0 0.1 13040 6108 ? S 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=CommandRunner:0:1 -s mailman 24074 1.0 0.1 13484 6104 ? S 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=IncomingRunner:0:1 -s mailman 24075 1.0 0.1 12940 6136 ? S 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=NewsRunner:0:1 -s mailman 24076 1.0 0.1 13700 6172 ? S 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=OutgoingRunner:0:1 -s mailman 24077 1.0 0.1 13416 6100 ? S 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=VirginRunner:0:1 -s mailman 24078 0.9 0.1 13944 6100 ? S 19:47 0:00 /usr/local/bin/python2.4 /usr/local/cpanel/3rdparty/mailman/bin/qrunner --runner=RetryRunner:0:1 -s root 24177 0.0 0.0 5428 756 pts/0 S+ 19:48 0:00 grep python

  Read the article

• SCons does not clean all files

  - by meowsqueak

  I have a file system containing directories of "builds", each of which contains a file called "build-info.xml". However some of the builds happened before the build script generated "build-info.xml" so in that case I have a somewhat non-trivial SCons SConstruct that is used to generate a skeleton build-info.xml so that it can be used as a dependency for further rules. I.e.: for each directory: if build-info.xml already exists, do nothing. More importantly, do not remove it on a 'scons --clean'. if build-info.xml does not exist, generate a skeleton one instead - build-info.xml has no dependencies on any other files - the skeleton is essentially minimal defaults. during a --clean, remove build-info.xml if it was generated, otherwise leave it be. My SConstruct looks something like this: def generate_actions_BuildInfoXML(source, target, env, for_signature): cmd = "python '%s/bin/create-build-info-xml.py' --version $VERSION --path . --output ${TARGET.file}" % (Dir('#').abspath,) return cmd bld = Builder(generator = generate_actions_BuildInfoXML, chdir = 1) env.Append(BUILDERS = { "BuildInfoXML" : bld }) ... # VERSION = some arbitrary string, not important here # path = filesystem path, set elsewhere build_info_xml = "%s/build-info.xml" % (path,) if not os.path.exists(build_info_xml): env.BuildInfoXML(build_info_xml, None, VERSION = build) My problem is that 'scons --clean' does not remove the generated build-info.xml files. I played around with env.Clean(t, build_info_xml) within the 'if' but I was unable to get this to work - mainly because I could not work out what to assign to 't' - I want a generated build-info.xml to be cleaned unconditionally, rather than based on the cleaning of another target, and I wasn't able to get this to work. If I tried a simple env.Clean(None, "build_info_xml") after but outside the 'if' I found that SCons would clean every single build-info.xml file including those that weren't generated. Not good either. What I'd like to know is how SCons goes about determining which files should be cleaned and which should not. Is there something funny about the way I've used a generator function that prevents SCons from recording this target as a Clean candidate?

  Read the article

• Commit in sharpSVN

  - by Pedro

  Hello! I have a problem doing commit with sharpsvn. Now i´m adding all the files of my working copy (if the file is added throws an exception), and after it i do commit. It works but it trows exceptions. There is some way to get the status of the repository before do add() and only add the new files or the files who are changed? And if i delete one file or folder on my working copy , How can i delete these files or folder on the repository? Code: String[] folders; folders = Directory.GetDirectories(direccionLocal,"*.*", SearchOption.AllDirectories); foreach (String folder in folders) { String[] files; files = Directory.GetFiles(folder); foreach (String file in files) { if (file.IndexOf("\\.svn") == -1) { Add(file, workingcopy); } } } Commit(workingcopy, "change"); Add: public bool Add(string path, string direccionlocal) { using (SvnClient client = new SvnClient()) { SvnAddArgs args = new SvnAddArgs(); args.Depth = SvnDepth.Empty; Console.Out.WriteLine(path); args.AddParents = true; try { return client.Add(path, args); } catch (Exception ex) { return false; } } } Commit: public bool Commit(string path, string message) { using (SvnClient client = new SvnClient()) { SvnCommitArgs args = new SvnCommitArgs(); args.LogMessage = message; args.ThrowOnError = true; args.ThrowOnCancel = true; try { return client.Commit(path, args); } catch (Exception e) { if (e.InnerException != null) { throw new Exception(e.InnerException.Message, e); } throw e; } } }

  Read the article

• How to get a safecontrol entry into manifest.xml with WSPBuilder project

  - by andrew

  Upon taking the default sharepoint master page for MySite, making some changes, and making a wsp out of it with WSPBuilder, I come to these errors in my logs: http://spoint/MySite/%5Fcatalogs/masterpage/MySite.master - An unexpected error has been encountered in this Web Part. Error: The control with virtual path '_controltemplates/Welcome.ascx' is not in the safe controls list for web at URL 'http://spoint/MySite'., Source: [UnsafeControlException: The control with virtual path '_controltemplates/Welcome.ascx' is not in the safe controls list for web at URL 'http://spoint/MySite' (stack trace omitted) http://spoint/MySite/%5Fcatalogs/masterpage/MySite.master - An unexpected error has been encountered in this Web Part. Error: The control with virtual path '_controltemplates/DesignModeConsole.ascx' is not in the safe controls list for web at URL 'http://spoint/MySite'., Source: [UnsafeControlException: The control with virtual path '_controltemplates/DesignModeConsole.ascx' is not in the safe controls list for web at URL 'http://spoint/MySite' (stack trace ommited) So, this masterpage does in fact use these OOTB controls and so I guess I need to get them safecontrolled. And I guess I want to do this via the manifest.xml. But I do not see how to make WSPBuilder do this.

  Read the article

• Windows Sharepoint Services - FullTextSqlQuery Document library Unable to find items created by SYST

  - by Ashok

  We have created an ASP.NET web app that upload files to WSS Doc Libary. The files get added under 'SYSTEM ACCOUNT' in the library. The FullTextSqlQuery class is used to search the document libary items. But it only searches files that has been uploaded by a windows user account like 'Administrator' and ignores the ones uploaded by 'SYSTEM ACCOUNT'. As a result the search results are empty even though we have the necessary data in the document library. What could be the reason for this? The code is given below: public static List GetListItemsFromFTSQuery(string searchText) { string docLibUrl = "http://localhost:6666/Articles%20Library/Forms/AllItems.aspx"; List items = new List(); DataTable retResults = new DataTable(); SPSecurity.RunWithElevatedPrivileges(delegate { using (SPSite site = new SPSite(docLibUrl)) { SPWeb CRsite = site.OpenWeb(); SPList ContRep = CRsite.GetListFromUrl(docLibUrl); FullTextSqlQuery fts = new FullTextSqlQuery(site); fts.QueryText = "SELECT Title,ContentType,Path FROM portal..scope() WHERE freetext('" + searchText + "') AND (CONTAINS(Path,'\"" + ContRep.RootFolder.ServerRelativeUrl + "\"'))"; fts.ResultTypes = ResultType.RelevantResults; fts.RowLimit = 300; if (SPSecurity.AuthenticationMode != System.Web.Configuration.AuthenticationMode.Windows) fts.AuthenticationType = QueryAuthenticationType.PluggableAuthenticatedQuery; else fts.AuthenticationType = QueryAuthenticationType.NtAuthenticatedQuery; ResultTableCollection rtc = fts.Execute(); if (rtc.Count > 0) { using ( ResultTable relevantResults = rtc[ResultType.RelevantResults]) retResults.Load(relevantResults, LoadOption.OverwriteChanges); foreach (DataRow row in retResults.Rows) { if (!row["Path"].ToString().EndsWith(".aspx")) //if (row["ContentType"].ToString() == "Item") { using ( SPSite lookupSite = new SPSite(row["Path"].ToString())) { using (SPWeb web = lookupSite.OpenWeb()) { SPFile file = web.GetFile(row["Path"].ToString()); items.Add(file.Item); } } } } } } //using ends here }); return items; }

  Read the article

• MSBuild OutputPath property and absolute paths

  - by Frederik Vig

  I'm trying to set the OutputPath value to an absolute path: <OutputPath>c:\Projects\xxx\Deployment</OutputPath> But I get this error: Error 17 The expression "[System.IO.Path]::GetFullPath(D:\Projects\xxx\trunk\xxx.Web.Deployment\c:\Projects\xxx\Deployment\)" cannot be evaluated. The given path's format is not supported. 1 1 xxx.Web.Deployment Is there a way to use an absolute path with the OutputPath property? I've tried experimenting with the BaseOutputPath property: <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Deployment|AnyCPU'"> <BaseOutputPath>C:\Projects\xxx\</BaseOutputPath> <OutputPath>.\Deployment</OutputPath> <EnableUpdateable>true</EnableUpdateable> <UseMerge>true</UseMerge> <SingleAssemblyName>xxx.Web.Deployment</SingleAssemblyName> But it seems to get ignored. What are BaseOutputPath and BaseIntermediateOutputPath used for?

  Read the article

< Previous Page | 130 131 132 133 134 135 136 137 138 139 140 141  | Next Page >