Search Results

Search found 9125 results on 365 pages for 'boot disc'.

Page 135/365 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

  • How to remove raid 5 array of 5 SAS and use only use one SAS at a time without writing any thing to disc for recovery

    - by murtaza hamid
    I have HP server ML370 g5 with 8 SAS, c drive 1 72 gb raid 0, d drive 2 72 gb raid 0, f drive 5 146 gb raid 5. 2 of 5 sas drive has got bad sectors and raid 5 is showing status failed. now i want to remove all this 5 SAS and put 1 by 1 in any of the bay to make its image for data recovery purpose without writing anything to the drive. how should i proceed. i also want to keep drive c and d intact. also is it possible if i put all this 5 drives in the bay with the same sequense will it recognise the raid 5 array ( i read some where its smart controller..just curious) many thanks in advance.

    Read the article

  • What is the best / latest software to convert DVD recorder disc to YouTube?

    - by Jian Lin
    I recorded some Wii gameplay to a DVD-R using a DVD recorder, and tried using Handbrake to convert it to YouTube compatible format. Basically, it needs resizing to 16:9, and selecting 00:03 to 3:10 of the chapter (out of the 7 minutes). It seems Handbrake can't do it for 480p... and if using AutoGK and then VirtualDub to resize and do video time selection, it feels so old school (autogk not updated since 2005)... Windows Movie Maker seems like 15fps video quality... Is there a way to do it nicely? Details if using Handbrake: I can't find a way to convert a DVD recorded video which is 720 x 480 (Wii Gameplay in 16 : 9 ratio) into 852 x 480... It seems that the only possible resize is to shrink but not to expand? It is fine to make it 720 x 406... except YouTube won't be able to show it as 480p... If it can be made 852 x 480, then YouTube can at least show it as 480p (besides 360p and 240p)... is there any way to do it? thanks.

    Read the article

  • Why is windows 7 backup and restore utility using so much disc space?

    - by stuckey
    note: this is a reformation of a previous question, see: How exactly does the Backup and Restore utility in Windows7 work? I have per the task scheduler scheduled windows 7 backup and utility to run once a day. The amount of data I produce in a day is best measured in KiB yet, a few GiB of data is added to the backup destination set in the backup utility daily. Why is this? Is this due to this utility making what are called "normal" backups instead of "incremental" backups? If so, how can this setting be changed?

    Read the article

  • How Can I Edit a DVD Already Burned to Disc?

    - by AJ
    I have been asked to edit a DVD - specifically doing the following: Add chapter markers Add chapter selection menu Combine two shorter discs into one I would like to know if there is software that can allow me to import a DVD, make these changes, and then create a new master DVD?

    Read the article

  • KVM and libvirt: How to configure a new disc device to an existing VM?

    - by initall
    I've got an Ubuntu 9.04 server running two VM's. In /etc/libvirt/qemu/machine1.xml two disk devices are defined like this: <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/vserver/machine1/disk0.qcow2'/> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='disk'> <source file='/vserver/machine1/disk1.qcow2'/> <target dev='hdb' bus='ide'/> </disk> I need more storage space in at least one of the devices and thought about adding a third hdc device by simply adding one with same style as above and re-organising my mount structure (The virtual sizes of the current qcow2 files are unfortunately limited.) My problem is that reloading libvirtd and restarting the VM do not result in a new visible device (checked with fdisk). I'm aware of extending an existing qcow2 file (converting to raw format, cat-ing/adding the new one, using smth. like gparted) - but only as a last resort. Hopefully it's something very simple I'm missing?

    Read the article

  • How to Mount remote disc as local in Windows 7 and Windows 2003?

    - by Robert
    Is it possible to mount remote file system (on Windows 2003 server) as local disk in Windows 7? I have Windows 2003 server with software RAID and some shares. On another computer with Windows 7 I have software which can access only data form local or USB disks. This solution doesn't work because program doesn't see files in folder: Mount Remote CIFS/SMB Share as a Folder not a Drive Letter Everything is the same LAN.

    Read the article

  • Unable to boot from LiveCD/USB and even Super Grub Disk!

    - by Reuben L.
    Hi all, I'm in a fix. Basically this morning, I decided to format my Win7 as it was getting really slow and I did so with no problems. I also have a Linux Mint OS on dual boot. Since I was springcleaning my windows partition, I decided it was a good idea to do the same to my linux partition. I downloaded the latest version of Linux Mint (Julia) and burned the LiveCD. Now here is where the problem lies, when I restarted Windows and chose to boot from the LiveCD, it didn't work. No joke. There was just a little underscore blinking for a long time before it went back to GRUB which prompted me to select an OS to boot. However, when I went into my old Linux Mint OS and restarted the machine, the LiveCD worked... to a certain extent. It would load and look as though it was ready to install Linux Mint 10 but the moment it got to the option screen, the whole screen turned into a checkered and jumbled mess. At this point I thought it was the LiveCD or the .iso file. I had an Ubuntu LiveUSB for recovery purposes and I tried that. The exact same thing happened. Can't boot the LiveUSB if I restarted from Windows, but works when I reboot from Linux. BUT still the same checkered screen that doesnt respond. Did a bit of googling and reckoned it might be something wrong with my GRUB. Did some updating and didnt make a difference. Then I tried the Super Grub Disk and STUPIDLY uninstalled GRUB. (Note that booting to SGD had the exact same problem - can't be done if I rebooted from Windows). Now I can't access my Linux Mint 9 cos the the bootup screen (mbr) only has Windows 7 as an option. Remember me mentioning that I can't boot from any CD/USB/recovery CD when I reboot from Windows? And now that I can't access Linux, there's no way for me to do any form of recovery! I've tried using the command prompt utility at startup recovery but to no avail. Anyone can help me with this?

    Read the article

  • KVM and libvirt: How to configure a new disc device to an existing VM?

    - by initall
    I've got an Ubuntu 9.04 server running two VM's. In /etc/libvirt/qemu/machine1.xml two disk devices are defined like this: <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/vserver/machine1/disk0.qcow2'/> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='disk'> <source file='/vserver/machine1/disk1.qcow2'/> <target dev='hdb' bus='ide'/> </disk> I need more storage space in at least one of the devices and thought about adding a third hdc device by simply adding one with same style as above and re-organising my mount structure (The virtual sizes of the current qcow2 files are unfortunately limited.) My problem is that reloading libvirtd and restarting the VM do not result in a new visible device (checked with fdisk). I'm aware of extending an existing qcow2 file (converting to raw format, cat-ing/adding the new one, using smth. like gparted) - but only as a last resort. Hopefully it's something very simple I'm missing?

    Read the article

  • Can't shrink Windows Boot NTFS disk: ERROR(5): Could not map attribute 0x80 in inode, Input/output error

    - by arcyqwerty
    Ubuntu 12.04 LTS, all updates current as of 7/3/2012 gksudo gparted Shrink /dev/sda2 from 367GB to 307GB GParted 0.11.0 --enable-libparted-dmraid Libparted 2.3 Shrink /dev/sda2 from 367.00 GiB to 307.00 GiB 00:32:57 ( ERROR ) calibrate /dev/sda2 00:00:00 ( SUCCESS ) path: /dev/sda2 start: 20,484,096 end: 790,142,975 size: 769,658,880 (367.00 GiB) check file system on /dev/sda2 for errors and (if possible) fix them 00:00:53 ( SUCCESS ) ntfsresize -P -i -f -v /dev/sda2 ntfsresize v2012.1.15AR.1 (libntfs-3g) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 394065338880 bytes (394066 MB) Current device size: 394065346560 bytes (394066 MB) Checking for bad sectors ... Checking filesystem consistency ... Accounting clusters ... Space in use : 327950 MB (83.2%) Collecting resizing constraints ... Estimating smallest shrunken size supported ... File feature Last used at By inode $MFT : 389998 MB 0 Multi-Record : 394061 MB 386464 $MFTMirr : 314823 MB 1 Compressed : 394064 MB 1019521 Sparse : 330887 MB 752454 Ordinary : 393297 MB 706060 You might resize at 327949758464 bytes or 327950 MB (freeing 66116 MB). Please make a test run using both the -n and -s options before real resizing! shrink file system 00:32:04 ( ERROR ) run simulation 00:32:04 ( ERROR ) ntfsresize -P --force --force /dev/sda2 -s 329640837119 --no-action ntfsresize v2012.1.15AR.1 (libntfs-3g) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 394065338880 bytes (394066 MB) Current device size: 394065346560 bytes (394066 MB) New volume size : 329640829440 bytes (329641 MB) Checking filesystem consistency ... Accounting clusters ... Space in use : 327950 MB (83.2%) Collecting resizing constraints ... Needed relocations : 13300525 (54479 MB) Schedule chkdsk for NTFS consistency check at Windows boot time ... Resetting $LogFile ... (this might take a while) Relocating needed data ... Updating $BadClust file ... Updating $Bitmap file ... ERROR(5): Could not map attribute 0x80 in inode 1667593: Input/output error ======================================== Windows has run chkdsk successfully (on boot) several times now

    Read the article

  • If I want to dual-boot Ubuntu with another OS, what partitioning method should I use?

    - by Jay
    I have Ubuntu running as a vm in VirtualBox at the moment, but in the future, if I want to dual-boot it with Windows or another OS installed on my hard-drive, what partitioning method should I use to make room for it? 1)Manually partition my hard drive via disk management in Windows (or the equivalent in another OS), making appropriate room for the main partition upon which Ubuntu will be installed and swap space; 2)Partition via the Ubuntu installer options; 3)Use gparted or another free tool like it. I am uncertain as to why I would want to use one over the other. Lastly, am I correct to think that it would be the acme of foolishness to try to partition drives within a virtual machine (since that partitioning would be inherently limited to the limitations set upon it by the virtualization software, e.g., VirtualBox)? Thanks! P.S. Oh, and I am also planning on not modifying the MBR of Windows if I ever do dual-boot with Ubuntu, using instead a piece of free software (like easyBCD or something) to avoid the headaches of Grub being overwritten by a Windows update.

    Read the article

  • How can I disable the purple bootloader splash at boot?

    - by wim
    This question has been answered before, but neither of the methods in the accepted answer worked for me on 11.10. First I tried editing in /etc/default/grub, and then running sudo update-grub. But after that I still got a blank, plain, purple screen while the kernel is loading. The screen has no boot options, and it obscures those dmesg that I want to see going in the terminal. Next I tried removing the plymouth-theme-*, but that just broke my gnome-shell theme looks, and the purple screen still remains. I have also tried configuring it with startupmanager package, but nothing seems to get rid of that darned purple splash. here are the contents of my /etc/default/grub file: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT="0" GRUB_HIDDEN_TIMEOUT="0" GRUB_HIDDEN_TIMEOUT_QUIET="true" GRUB_TIMEOUT="0" GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`" #GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) # GRUB_TERMINAL="console" # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE="640x480" # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID="true" # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" GRUB_DISABLE_OS_PROBER="true"

    Read the article

  • Windows partition UNKNOWN after Ubuntu installation attempt at dual boot - How to fix?

    - by user285645
    The idea was to install Win 7 and Ubuntu with dual boot. However, after installation, Gparted shows a /dev/sda1 as an 'unknown' filesystem and its size is 278 GB. All my windows files, data are in this partition. THen, there's /dev/sda2 with 'EXT4' filesystem (size-9.54 GB) - created during Ubuntu install. Then, there's /dev/sda3 with 'extended' filesystem (size- 10.5 GB) - created during Ubuntu install. Then, there's /dev/sda5 with 'linux swap' filesystem (size- 2 GB) - created during Ubuntu install. Then, there's /dev/sda6 with 'ext4' filesystem (size- 8.5 GB) - created during Ubuntu install. MY questions are: What exactly does this Gparted output above mean? How to recover my previous Windows 7 installation that's in /dev/sda1 (NTFS). I have some important files I need. Also, I had a PGP encryption on the disk before installing Ubuntu. Now, it just boots straight into Ubuntu... why? How to uninstall Ubuntu (the Try ubuntu and uninstall did not work. the boot-repair did not work) I have read other topics but noone has provided a proper step by step answer to how to recover my 278GB WIndows partition. The testdisk step by step procedure did not work. It says the NTFS disk is unrecognized.

    Read the article

  • Do i need to restore iptable rules everytime on boot?

    - by capdragon
    Every time i reboot i loose the iptables rules that took me sooo long to enter. I know i can save them and restore them on boot but is there anyway to save them forever? Do i really need to restore them on boot every time? Seriously? The problem is I have a HUGE list of IPs in which i use a while loop to load them in. This can take upwards of 10 minutes. This is my home FTP server. It's a small vm with 1gb ram and very little processing power. There are so many IPs because I've pretty much given up on the Asian continent. I don't need them to be hitting up my ftp server everyday with brute force. I also block gov. monitors, trackers and spammers. This is the while loop i use to load in the list. grep INPUT block.list | while read LISTA; do sudo iptables -A $LISTA; done

    Read the article

  • How to Boot or "enter" into ubnutu 11.04 (Natty Narwhall) on PS3 after installing it?

    - by Xdm
    After failing to install ubuntu 11.04 Desktop version (burned on a dvd, because iso's file size was 726 Mb), in tried the alternate version (about 686 Mb) which i burned into a CD. During the installation process, i manually partitioned the hard drive using ext3. After the installation, the CD ejects itself and i hit "continue". In the k boot prompt i hit "enter" on my the keyboard. I see i welcome message in a dark background (a kind of full screen terminal/console called CLI i think) and was asked to enter my user name and password. After that, instead of booting into the beautiful desktop of Ubuntu, i saw this: ubuntu@my_name$ It was like a line of command i think, where you can use "sudo" commands. It is called a non-graphic mode i think. My my REAL problem is to enter Ubuntu 11.04 with the chocolate-colored background and the African music drum. I tried many commands to boot into the graphic mode of the system such as Ctr+Alt+F7 but nothing happened. In this case, i just saw numbers showing available blocks. I DON'T UNDERSTAND. I also tried startx and sudo startx without result. I DO bought a PS3 BOTH for gaming and for Ubuntu because i can't afford buying a PC. Please help me with my trouble dear Ubuntu 11.04 users. I am counting on you. All the best Xdm

    Read the article

  • Why does my dd backup of MacBook OS X fail to boot upon restore?

    - by James
    I created a backup of a MacBook hard drive (WD2500BEVS-88US) by hooking it up as a secondary drive on my linux system (Ubuntu 10.10). I used the following command: sudo dd if=/dev/sdc of=/home/backup.img bs=2M This appears to have completed with no errors. I noticed that the file is only 68 GB in size even though the drive is 250 GB in capacity. I restored the image to a spare drive (WD2500BEVS) with the following command: sudo dd if=/home/backup.img of=/dev/sdb bs=2M When I boot the spare drive in the Mac, it appears to start up for a few seconds and then shuts down. (It does not appear to load into the OS at all). When I open up the drive that won't boot in GParted, it looks like this: When looking at the information for the middle partition with the little red exclamation mark, it shows this: The original hard drive that boots ok shows up like this: Further info on both drives: sudo fdisk -l Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 30402 244198580 ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 30402 244198580 ee GPT So why is my backup or restore failing? Why is dd not creating a byte for byte duplicate?

    Read the article

  • What tells initramfs or the Ubuntu Server boot process how to assemble RAID arrays?

    - by Brad
    The simple question: how does initramfs know how to assemble mdadm RAID arrays at startup? My problem: I boot my server and get: Gave up waiting for root device. ALERT! /dev/disk/by-uuid/[UUID] does not exist. Dropping to a shell! This happens because /dev/md0 (which is /boot, RAID 1) and /dev/md1 (which is /, RAID 5) are not being assembled correctly. What I get is /dev/md0 isn't assembled at all. /dev/md1 is assembled, but instead of using /dev/sda2, /dev/sdb2, /dev/sdc2, and /dev/sdd2, it uses /dev/sda, /dev/sdb, /dev/sdc, /dev/sdd. To fix this and boot my server I do: $(initramfs) mdadm --stop /dev/md1 $(initramfs) mdadm --assemble /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 $(initramfs) mdadm --assemble /dev/md1 /dev/sda2 /dev/sdb2 /dev/sdc2 /dev/sdd2 $(initramfs) exit And it boots properly and everything works. Now I just need the RAID arrays to assemble properly at boot so I don't have to manually assemble them. I've checked /etc/mdadm/mdadm.conf and the UUIDs of the two arrays listed in that file match the UUIDs from $ mdadm --detail /dev/md[0,1]. Other details: Ubuntu 10.10, GRUB2, mdadm 2.6.7.1 UPDATE: I have a feeling it has to do with superblocks. $ mdadm --examine /dev/sda outputs the same thing as $ mdadm --examine /dev/sda2. $ mdadm --examine /dev/sda1 seems to be fine because it outputs information about /dev/md0. I don't know if this is the problem or not, but it seems to fit with /dev/md1 getting assembled with /dev/sd[abcd] instead of /dev/sd[abcd]2. I tried zeroing the superblock on /dev/sd[abcd]. This removed the superblock from /dev/sd[abcd]2 as well and prevented me from being able to assemble /dev/md1 at all. I had to $ mdadm --create to get it back. This also put the super blocks back to the way they were.

    Read the article

  • Safe mode boot with no change on screen but ongoing hard disk activity - why?

    - by omatai
    I have a machine with a dying hard drive - bad sectors are starting to multiply :-( The first sign (24 hours ago) was that it had an unmountable boot volume. At this time, I tried booting to safe mode with command prompt, which worked, after which I rebooted normally and ran a chkdsk. It has since been working as well as I could expect, but slowly getting less reliable. So I scheduled another chkdsk on both partitions (C: - boot, D: - data), having freed up a lot of space on both partitions to give Windows a little more scope for repairs (hopefully?). I then rebooted. On reboot, it protested about the unmountable boot volume again, so I booted to safe mode. I got the same list of drivers loaded as yesterday, and then no change to the screen for the past 2 hours. However, I see a flickering hard drive indicator light - not always on, but seldom ever off. What is happening? Is the chkdsk that runs in safe mode one which produces nothing on the screen and so chkdsk could be doing its thing... or is Windows still trying (but failing) to boot into Safe Mode?

    Read the article

  • Video card not detected in POST on initial boot.

    - by Jeff M
    I have a minor problem with my desktop computer after cleaning it out for dust. When I first boot up the computer, the video card does not get detected so I can't see anything. In POST, I'm getting the "can't detect video card" beeps. The boot sequence continues normally, just without video. However, if I restart it (using the restart button) anytime after POST, it would boot up normally. I have no reason to think that the motherboard, video card or PSU got damaged in the process. It was working fine before, works fine after resetting. Took all the necessary precautions while cleaning. On the initial boot, I can hear the video card's fan power up but immediately power down and try again one more time only to fail. After the beep, resetting gets everything running and sounding normally. I've reseated the card a couple of times and reset the BIOS but doesn't seem to help. I'm hoping I won't have to take it out and remove and reinstall everything again. Does anyone recognize these symptoms to know exactly what the problem is? My guess is that the video card isn't getting enough juice initially to be running stable to be detected. I just don't know what I did (or didn't do) to get it to be in this state. It's not a high priority thing for me at the moment, just means I have to always reset it after initially turning it on but will eventually remove everything and reinstall if it comes to that. I don't think the specs are relevant here but just in case, here's the relevant stuff: Motherboard: Gigabyte P35-DS3P Video: EVGA GeForce 8600 GTS PSU: Antec True Power Trio 650W Built ~2 years ago, still running well

    Read the article

  • How to install Windows with no CD drive boot option in BIOS?

    - by Kris Hollenbeck
    I have a new computer which I built from scratch and I am trying to install a copy of Windows Vista on it. I am able to get to the BIOS and change the boot options which are as follows.. -Built-in EFI Shell -SATA: ST31000528AS I have searched around for and everything I find says to boot from the CD rom. However, as you can see. That is not an option for me. So I am wondering if there is another way around this? Is it possible to boot the Disk from the EFI Shell? Any help is much appreciated. Thanks EDIT: I have tried this.. http://technet.microsoft.com/en-us/library/dd744321%28v=ws.10%29.aspx UPDATE: I managed to make my USB bootable via the BIOS and I have copied my windows Vista disk onto my USB via drag and drop. However I am still not able to get the windows install to start. Also I have tried booting it from the EFI shell using the following command.. blk6: blk6:\> \EFI\BOOT\BOOTX64.EFI Still no luck..

    Read the article

  • How can I make grub2 boot into Windows 7?

    - by Grzenio
    I had Windows 7 installed on my system, then I installed Debian testing with grub2 as its boot manager. Initially I couldn't see windows entry in grub at all, so I ran: aptitude install os-prober kcpuload update-grub Now I can see the entry, but when I select it I get only Win7 system restore, instead of the the real thing. Any ides how to make it work? EDIT: I tried the suggested approach to add a new file to /etc/grub.d, which generated an entry in grub.cfg, but it does not appear in the grub menu on boot :( I have this: grzes:/home/ga# cat /etc/grub.d/11_Windows #! /bin/sh -e echo Adding Windows >&2 cat << EOF menuentry “Windows 7? { set root=(hd0,2) chainloader +1 } And I have the following grub.cfg file: grzes:/home/ga# cat /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } insmod ext2 set root=(hd0,3) search --no-floppy --fs-uuid --set 6ce3ff31-0ef7-41df-a6f5-b6b886db3a94 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi set locale_dir=/boot/grub/locale set lang=en insmod gettext set timeout=5 ### END /etc/grub.d/00_header ###

    Read the article

  • How Can I Safely Destroy Sensitive Data CDs/DVDs?

    - by Jason Fitzpatrick
    You have a pile of DVDs with sensitive information on them and you need to safely and effectively dispose of them so no data recovery is possible. What’s the most safe and efficient way to get the job done? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader HaLaBi wants to know how he can safely destroy CDs and DVDs with personal data on them: I have old CDs/DVDs which have some backups, these backups have some work and personal files. I always had problems when I needed to physically destroy them to make sure no one will reuse them. Breaking them is dangerous, pieces could fly fast and may cause harm. Scratching them badly is what I always do but it takes long time and I managed to read some of the data in the scratched CDs/DVDs. What’s the way to physically destroy a CD/DVD safely? How should he approach the problem? The Answer SuperUser contributor Journeyman Geek offers a practical solution coupled with a slightly mad-scientist solution: The proper way is to get yourself a shredder that also handles cds – look online for cd shredders. This is the right option if you end up doing this routinely. I don’t do this very often – For small scale destruction I favour a pair of tin snips – they have enough force to cut through a cd, yet are blunt enough to cause small cracks along the sheer line. Kitchen shears with one serrated side work well too. You want to damage the data layer along with shearing along the plastic, and these work magnificently. Do it in a bag, cause this generates sparkly bits. There’s also the fun, and probably dangerous way – find yourself an old microwave, and microwave them. I would suggest doing this in a well ventilated area of course, and not using your mother’s good microwave. There’s a lot of videos of this on YouTube – such as this (who’s done this in a kitchen… and using his mom’s microwave). This results in a very much destroyed cd in every respect. If I was an evil hacker mastermind, this is what I’d do. The other options are better for the rest of us. Another contributor, Keltari, notes that the only safe (and DoD approved) way to dispose of data is total destruction: The answer by Journeyman Geek is good enough for almost everything. But oddly, that common phrase “Good enough for government work” does not apply – depending on which part of the government. It is technically possible to recover data from shredded/broken/etc CDs and DVDs. If you have a microscope handy, put the disc in it and you can see the pits. The disc can be reassembled and the data can be reconstructed — minus the data that was physically destroyed. So why not just pulverize the disc into dust? Or burn it to a crisp? While technically, that would completely eliminate the data, it leaves no record of the disc having existed. And in some places, like DoD and other secure facilities, the data needs to be destroyed, but the disc needs to exist. If there is a security audit, the disc can be pulled to show it has been destroyed. So how can a disc exist, yet be destroyed? Well, the most common method is grinding the disc down to destroy the data, yet keep the label surface of the disc intact. Basically, it’s no different than using sandpaper on the writable side, till the data is gone. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >