Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 135/194 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• After upgrading to 12.04 from 10.10 my mythbuntu standard MCEUSB remote no longer works

  - by keepitsimpleengineer

  I had no problems using my Windows Media Center Remote with 10.10 Mythbuntu, but after upgrading, it no longer affects Mythbuntu. I have verified and re-installed it in Mythbuntu Control Centre. I have used irw to verify the ir buttons actions are properly received by the HTPC. How do I go about fixing this? 3.2.0-26-generic (#41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012) Xorg version: 1.11.3 (16 July 2012 08:06:31PM) GCC: 4.6 (x86_64-linux-gnu) Current updates as of 2012?07?21 $cat /etc/lirc/hardware.con #Chosen Remote Control REMOTE="Windows Media Center Transceivers/Remotes (all)" REMOTE_MODULES="lirc_dev mceusb" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_SOCKET="" REMOTE_LIRCD_CONF="mceusb/lircd.conf.mceusb" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_SOCKET="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" # lsusb | grep -i infrared Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver

  Read the article

• How to get Broadcom BCM 43XX Wireless card working

  - by Fer1805

  NOTE - Although this question is for a specific version of Ubuntu and a specific Broadcom model, the answer to it is for most Broadcom models and versions of Ubuntu 11.04, 11.10, 12.04 and 12.10. If you have come here from another question, feel free to read the answer instead. The answer covers many problems with several solutions. I'm having serious problems installing the Broadcom drivers for Ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in Linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. How can I get Broadcom BCM4311 Wireless working? Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

  Read the article

• Swap, Swapiness and Standby: swapping starts when waking up

  - by mdo

  I'm running running Ubuntu 12.04 on a Lenovo W500 (Core2Duo T9400, 4GB Ram) Current kernel: 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux -- but the problems exists since a couple of months, surviving quite a few software (includig kernel) updates I regularly put my machine into suspend-to-ram (S3) and when the machine comes back up Ubuntu starts to swap out processes. I was able to observe that the used swap-space starts to grow right after the box returns. See munin graphs below, the gap (obviously) shows the timeframe in STR. Needless to say that the box becomes unusable while swapping, load goes up beyond 10. What I've done so far: lowered swappiness from default (60) to 10 (via /etc/sysctl.conf: vm.swappiness=10) -- this has improved the situation much, but sometimes the problem comes back, I have not found a trigger (like memory usage) for this for now lowered swappiness to 5 -- perhaps this has brought an improvement again Before going to STR the box ran stable without (swapping) problems for hours. Today when the issue showed up again I used this script (- http://stackoverflow.com/questions/479953/how-to-find-out-which-processes-are-swapping-in-linux) to find what processes have the most used swap space. The result after the swap orgy is like that (all PIDs with more than 10M usage): Overall swap used: 2121344 kB ======================================== kB pid name ======================================== 439520 17491 java 208148 22719 firefox 136640 4337 /usr/bin/quodli 120852 5271 chrome 81832 5264 chrome 74284 17003 chrome 65368 16960 chrome 57088 3675 chrome 56184 30923 chrome 54412 11331 chrome 54264 3878 chrome 51508 18382 chrome 50088 3163 zeitgeist-fts 49772 15543 chrome 41344 15355 compiz 35040 1161 mysqld 32124 18374 chrome 30940 11339 chrome 30044 5752 chrome 28780 4235 plugin-containe 24576 31246 empathy-chat 23840 17703 chrome 22512 3207 ubuntuone-syncd 21588 1937 ntop 18336 2021 asterisk 17200 3915 chrome 13964 1935 Xorg 12036 10679 chrome 11104 30782 empathy 11056 2889 python 10932 16565 knotify4 The java instance at the top is IntelliJ. IntelliJ, Firefox and Chrome also were all used right before the box was put to STR. So my question is: can I somehow prevent these swapouts AND why do they happen? Is it perhaps related to some misidentification of idle processes? I'm not looking for resolutions like: turn off swap buy more RAM Thanks in advance!

  Read the article

• Bizarre image loading problem from apache2

  - by NateDSaint

  Users have complained a few times about seeing a bizarre set of pink or green stripes on our webpage. At first I thought there were a rash of video card outages, but then someone sent me a screenshot from their browser (IE8). I later saw the same thing, but with slightly different colors on Chrome. Users have experienced this on their iPads and iPhones (iOS Safari). Because I've optimized the site to cache images, the bad image stays around until you clear your cache, so once you do, it resolves itself. My assumption is that the transmission of the image is being cut off mid-stream and then staying that way, but I can't for the life of me figure out why. Here's what I've checked: Header length is being sent, and transmission looks okay (wget sample below): wget http://www.superiorlivestock.com/templates/sla2/images/wallbg2.jpg --2012-04-05 08:46:00-- http://www.superiorlivestock.com/templates/sla2/images/wallbg2.jpg Resolving www.superiorlivestock.com (www.superiorlivestock.com)... [ip redacted] Connecting to www.superiorlivestock.com (www.superiorlivestock.com)|[ip redacted]|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 45926 (45K) [image/jpeg] Saving to: `wallbg2.jpg' Images are not being served gzipped (apache conf below): SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary The site is www.superiorlivestock.com, and here's a sample of the bad page load: Is there something obvious I'm missing? Am I saving my images in the wrong format somehow?

  Read the article

• Change power button to 'Ask' in Xubuntu 13.10

  - by Gully.Moy

  I have recently installed Xubuntu 13.10 on my Vaio vpcea making me a Linux beginner. The problem is that laptop's power button is right on the edge of the bezel making it far too easy to press accidentally, in my opinion a design fault by Sony. At present, when I press the power button it shuts down strait away and as you can imagine, when I'm accidentally pressing it all the time it gets very annoying! So I planned to change it to ask what I would like to do when I press it or at least ask if I'm sure. So I went through the xfce GUI options "Settings Manager" - "Power Manager" to the field "When power button is pressed", but it was already set to "Ask". So I did some digging and found a thread telling me to navigate to /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml where it said to find power-button-action and check that value="3". It already did. So I looked some more and found this thread which focuses on acpi scripts. I tried solution 1 & 2 using sudoedit to change the files accordingly (I have made executable bash shell scripts already so I think I followed them correctly), but still no difference. I also found this thread which instructed me to edit /etc/systemd/logind.conf so that HandlePowerKey=ignore. Still no luck. I even tried my own approach to completely disable /etc/acpi/powerbtn.sh by renaming it powerbtn.sh.bak hoping for at least no response from the power button... and I have done many reboots in between... but still it shuts down! I have also read that some people have the file /etc/acpi/events/power_button, but I do not. So does anyone have any other ideas? What else could be executing the shutdown sequence Is there something I'm missing? I haven't undone any of these actions so every one of the above files is currently edited on my computer, with the exception that "Solution 2" automatically undone "Solution 1" above. Thanks guys.

  Read the article

• Nginx or Apache for a VPS?

  - by James

  I consider myself to be an inexperienced user/administrator when it comes to running my VPS. I can get by with a few CLI commands, I can set up Webmin and I can set up Yum repos, but beyond the very basic stuff, I'm out of my depth. So far, I'm running Apache. I don't know it particularly well, but I can get by with editing httpd.conf if I'm told what to edit. I've heard good things about Nginx and that it's not as resource-hungry as Apache. I'd like to give it a go, but I can't find any information about its suitability for administrators like me, with little experience of sysadmin or web server config. Webmin now has support for Nginx, so getting it installed and running probably won't be too much of a problem. What I'm wondering is, from a site administrator perspective, is running Nginx as transparent as running Apache? IE, at the moment, I can just throw up Wordpress and Drupal sites without having much to worry about or having to make any config changes to Apache. Would Nginx be as transparent?

  Read the article

• How to reset display settings in XFCE \ Ubuntu 12.04 and also flgrx drivers

  - by Agent24

  I recently upgraded to Ubuntu 12.04 and since I hate unity I installed the Xubuntu package and am using XFCE instead. Since I have a Radeon HD5770 I also installed the fglrx drivers. This all went fine (aside from the fact that the post-release update fglrx drivers have an error on installation and Ubuntu thinks they're not installed when they actually are. I configured my display settings (dual monitors, a 17" CRT on VGA and a 17" LCD on DVI) in the amdcccle program and everything was perfect. THEN, 2 days ago, I accidentally clicked on the "Display" settings in XFCE "settings" manager. After that, everything got screwed. Now, I normally run the CRT at 1152x854 and the LCD at 1280x1024 with the CRT as my primary monitor (with panel) and the LCD without panels etc just to display other windows when I want to drag them over there. The problem is now that if I set my CRT to 1152x864, it stays at 1280x1024 virtually and half the stuff falls off the screen. It also puts the LCD at 1280x1024 BUT then overlays the CRT's display ontop with different wallpaper in an L shape down the right-hand and bottom edges. In short, nothing makes sense and everything is FUBAR. I tried uninstalling fglrx through synaptic, and renaming xorg.conf and also the xfce XML file that has monitor settings but it still won't make sense. Unity on the other hand can currently set everything normally so the problem appears to be only with XFCE. In any case, I can't even get the fglrx drivers back, when I re-installed them, I can't run amdccle anymore as it says the driver isn't installed!! Can someone help me reset my XFCE settings so the monitors aren't screwed with some incorrect virtual desktop size and also so I can get fglrx drivers back and working? I really don't want to have to format and reinstall and go through all the hassle but it looks like I may have to :(

  Read the article

• updatedb & locate command problem - Files from external hard drive are no longer indexed after rebooting

  - by user784637

  Files from my external hard drive are no longer indexed after rebooting. I have to remount and then run # updatedb after each reboot. The problem is updatedb takes a few minutes for my external hard drives. Is there any way I can retain indexing for my externals after I reboot so that the locate command can search through my externals? EDIT: Per Request here are my specs: $ cat /etc/updatedb.conf PRUNE_BIND_MOUNTS="yes" # PRUNENAMES=".git .bzr .hg .svn" PRUNEPATHS="/tmp /var/spool /media" PRUNEFS="NFS nfs nfs4 rpc_pipefs afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf fuse.glusterfs fuse.sshfs ecryptfs fusesmb devtmpfs" # mount /dev/sda5 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/me/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=me) /dev/sdb1 on /media/me type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sdd1 on /media/Little Boy type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sde1 on /media/Fat Man type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) # on_ac_power; echo $? 255

  Read the article

• rkhunter: right way to handle warnings further?

  - by zuba

  I googled some and checked out two first links it found: http://www.skullbox.net/rkhunter.php http://www.techerator.com/2011/07/how-to-detect-rootkits-in-linux-with-rkhunter/ They don't mention what shall I do in case of such warnings: Warning: The command '/bin/which' has been replaced by a script: /bin/which: POSIX shell script text executable Warning: The command '/usr/sbin/adduser' has been replaced by a script: /usr/sbin/adduser: a /usr/bin/perl script text executable Warning: The command '/usr/bin/ldd' has been replaced by a script: /usr/bin/ldd: Bourne-Again shell script text executable Warning: The file properties have changed: File: /usr/bin/lynx Current hash: 95e81c36428c9d955e8915a7b551b1ffed2c3f28 Stored hash : a46af7e4154a96d926a0f32790181eabf02c60a4 Q1: Is there more extended HowTos which explain how to deal with different kind warnings? And the second question. Were my actions sufficient to resolve these warnings? a) To find the package which contains the suspicious file, e.g. it is debianutils for the file /bin/which ~ > dpkg -S /bin/which debianutils: /bin/which b) To check the debianutils package checksums: ~ > debsums debianutils /bin/run-parts OK /bin/tempfile OK /bin/which OK /sbin/installkernel OK /usr/bin/savelog OK /usr/sbin/add-shell OK /usr/sbin/remove-shell OK /usr/share/man/man1/which.1.gz OK /usr/share/man/man1/tempfile.1.gz OK /usr/share/man/man8/savelog.8.gz OK /usr/share/man/man8/add-shell.8.gz OK /usr/share/man/man8/remove-shell.8.gz OK /usr/share/man/man8/run-parts.8.gz OK /usr/share/man/man8/installkernel.8.gz OK /usr/share/man/fr/man1/which.1.gz OK /usr/share/man/fr/man1/tempfile.1.gz OK /usr/share/man/fr/man8/remove-shell.8.gz OK /usr/share/man/fr/man8/run-parts.8.gz OK /usr/share/man/fr/man8/savelog.8.gz OK /usr/share/man/fr/man8/add-shell.8.gz OK /usr/share/man/fr/man8/installkernel.8.gz OK /usr/share/doc/debianutils/copyright OK /usr/share/doc/debianutils/changelog.gz OK /usr/share/doc/debianutils/README.shells.gz OK /usr/share/debianutils/shells OK c) To relax about /bin/which as I see OK /bin/which OK d) To put the file /bin/which to /etc/rkhunter.conf as SCRIPTWHITELIST="/bin/which" e) For warnings as for the file /usr/bin/lynx I update checksum with rkhunter --propupd /usr/bin/lynx.cur Q2: Do I resolve such warnings right way?

  Read the article

• How can I run this script on startup, restart, and shutdown?

  - by Exeleration-G

  I'm using Ubuntu 11.10. I've written a script, that synchronises a directory in ~ with a directory on /dev/sda4, using Unison. Before, I had this script running every five minutes with no problems, using crontab. Right now, I want to execute this script at startup, restart and shutdown only. This is what the script looks like: #!/bin/bash unison -perms 0 -batch "/mnt/Data/Syncfolder/" "/home/myname/Syncfolder/" My crontab configuration was as follows: m h dom mon dow command 0,5,10,15,20,25,30,35,40,45,50,55 * * * * sh /usr/local/bin/s4lj.bash Note that I copied the script from ~ to /usr/local/bin/ first, to avoid root problems. I've read How to execute script on shutdown? and How to write an init script that will execute an existing start script?. After doing that, I've done this: I've made s4lj.bash executable, and then copied it to /etc/init.d/. For startup, I've made a symlink in /etc/rc2.d/ to /etc/init.d/s4lj.bash, and renamed it to S70s4lj.bash. For restart, I've made a symlink in /etc/rc6.d/ to /etc/init.d/s4lj.bash, and renamed it to K70s4lj.bash. For shutdown, I've made a symlink in /etc/rc0.d/ to /etc/init.d/s4lj.bash, and renamed it to K70s4lj.bash. Still, the script won't be run in any of these situations. How can I make the script get executed? I'd be happiest with a proper *.conf file in /etc/init. Thanks in advance.

  Read the article

• Could not apply the stored configuration for the monitor

  - by dellphi

  I'm using Nvidia 7300 gt and monitor-Acer V173w, on 64 bit Ubuntu 10.04. Compiz and Emerald went well, but at the time of entry into the GUI, I always receive the message : "Could not apply the stored configuration for the monitor, could not find a suitable configuration of screens" Why do I always receive it, and what is wrong with the monitor configuration or pci-e is used? root@dellph1-desktop:/# xrandr Screen 0: minimum 320 x 240, current 1440 x 900, maximum 1440 x 900 default connected 1440x900+0+0 0mm x 0mm 1440x900 50.0* 1024x768 51.0 58.0 59.0 1360x768 52.0 53.0 1152x864 54.0 55.0 56.0 57.0 960x600 60.0 960x540 61.0 896x672 62.0 840x525 63.0 64.0 65.0 66.0 832x624 67.0 800x600 68.0 69.0 70.0 71.0 72.0 73.0 800x512 74.0 720x450 75.0 680x384 76.0 77.0 640x512 78.0 79.0 640x480 80.0 81.0 82.0 83.0 576x432 84.0 85.0 86.0 87.0 512x384 88.0 89.0 90.0 416x312 91.0 400x300 92.0 93.0 94.0 95.0 320x240 96.0 97.0 98.0 root@dellph1-desktop:/# === xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.29 ([email protected]) Wed Dec 8 12:27:27 PST 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: xconfig, VertRefresh source: xconfig Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V173W" HorizSync 30.0 - 83.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 7300 GT" EndSection Section "Screen" # Removed Option "metamodes" " 1440x900_60 +0+0; 1280x1024 +0+0" # Removed Option "metamodes" "1440x900 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1440x900_75 +0+0; 1440x900 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How to install Oracle Database 11g Express Edition on Ubuntu 12.10?

  - by Praneeth Pj

  I installed the Oracle database following the steps mentioned in this blog. Downloaded 11g express edition Created a new user oracle under the group dba. Following steps are executed using this. Unzipped oracle-xe-11.2.0-1.0.x86_64.rpm.zip and then converted the rpm to the Ubuntu package by running: sudo alien --scripts -d oracle-xe-11.2.0-1.0.x86_64.rpm Created /sbin/chkconfig file and added the entries as specified there. Created /etc/sysctl.d/60-oracle.conf and added the entries as specified in the same link as above. Running the commands: ln -s /usr/bin/awk /bin/awk mkdir /var/lock/subsys touch /var/lock/subsys/listener .deb generated in step 3: sudo dpkg --install oracle-xe_11.2.0-2_amd64.deb Left the default values as it is: sudo /etc/init.d/oracle-xe configure Set the following env variables in ~/.bashrc file: export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe export ORACLE_SID=XE export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh` export ORACLE_BASE=/u01/app/oracle export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH export PATH=$ORACLE_HOME/bin:$PATH Running the commands: chown -R oracle:dba /var/tmp/.oracle chmod -R 755 /var/tmp/.oracle chown -R oracle:dba /tmp/.oracle chmod -R 755 /tmp/.oracle Starting Oracle Database 11g Express Edition instance: sudo service oracle-xe start sqlplus / as sysdba and got the following: SQL*Plus: Release 11.2.0.2.0 Production on Thu Jan 3 09:41:58 2013 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to an idle instance. Now when exectuting any SQL statements on SQLplus, I end up with the following error: SQL> select * from dual; select * from dual * ERROR at line 1: ORA-01034: ORACLE not available Process ID: 0 Session ID: 0 Serial number: 0 I have increased the swap memory as specified here $ free -m total used free shared buffers cached Mem: 3901 3428 473 0 182 1988 -/+ buffers/cache: 1258 2643 Swap: 5066 0 5066

  Read the article

• Using Apache2 to set up a basic webpage

  - by mrhatter

  I am having a problem with a test page I set up for my website. The config file (index.html) looks like this <html> <head> <title>Welcome to website.net!</title> </head> <body> <h1>Success! The website.net virtual host is working!</h1> </body> </html> Which should display a page like this in my browser when I navigate to www.mywebsite.net Welcome to website.net! Success! The website.net virtual host is working! However I get a 403 "forbidden" error when I navigate to the page. What am I missing? I have the directory installed on /var/www/mywebsite.net/public_html/index.html I have the permissions of the /var/www directory set to 755 so that others can read and exicute it but it does not seem to be working. I also have port 80 open on my iptable. The server is a VPS server if that makes a difference however I have added a DNS record for the ip address. Any help is appreciated! UPDATE: Here is my virtual host configuration file "mywebsite.net.conf" <VirtualHost *:80> # Admin email, Server Name (domain name), and any aliases ServerAdmin [email protected] ServerName www.mywebsite.net ServerAlias mywebsite.net # Index file and Document Root (where the public files are located) DirectoryIndex index.html index.php DocumentRoot /home/myusername/public/mywebsite.net/public # Log file locations LogLevel warn ErrorLog /home/mysuername/public/mywebsite.net/log/error.log CustomLog /home/myusername/public/mywebsite.net/log/access.log combined <Directory /home/myusername/public/mywebsite.net/public> Options Indexes ExecCGI Includes FollowSymLinks MultiViews AllowOverride All Order Deny,Allow Allow from all </Directory> </VirtualHost>

  Read the article

• How do I get a Broadcom BCM4311 working?

  - by Fer1805

  I'm having serious problems installing the broadcom drivers for ubuntu 11.04. It worked perfectly on my previous version, but now, it is impossible. I'm a user with no advance knowledge in linux, so I would need clear explanations on make, compile, etc. I was following the instructions on the following blog, with no luck. Broadcom BCM4311 Wireless not working Can someone help me? Edit: For the command: "lspci | grep Network", I get the following message: 06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) For the command: iwconfig, i get the following: lo no wireless extensions. eth0 no wireless extensions. When i follow the following steps (from the above link), there are a NO error message at all: open the 'Synaptic Package Manager' and search for bcm uninstall the bcm-kernel-source package make sure that the firmware-b43-installer and the b43-fwcutter packages are installed type into terminal: cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl' (you may want to copy this) and see if the term blacklist bcm43xx is there if it is, type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly). reboot 'End of procedure' Before (not ubuntu 11.04), if i wanted to connect wireles, i just went to the icon at the upper side of the screen, click, showed ALL the wireless network available, and done. Now, the only options i see are: Wired Network Auto Eth0 Disconnect VPN Enable networking Connection information Edit connection. hope above info is enough for your help.

  Read the article

• Bluetooth adapter turned from working fine to unrecognized

  - by easoncxz

  i had been using bluetooth fine, with devices working, but today when i turned on my computer again bluetooth strangely failed. there is a bluetooth icon on the top bar, showing "bluetooth on", but if i click on the "bluetooth settings" item, a system settings window shows up and shows me a bluetooth on-off switch which is disabled (i.e. fixed to off). more information about my case: i am a new linux used, coming from windows, and do not know supposedly-obvious commands. i am using a laptop. it initially doesn't have bluetooth. i bought a built-in type (instead of USB type) bluetooth module, and added it inside the laptop. hence, i do not have a specific FN+* key for bluetooth. in windows, i needed to install an additional driver that was intended for other machines in my laptop's seires which have built-in (i.e. factoryly built-in)j bluetooth modules. the Fn+* key seemed to only affect wifi under ubuntu. i have been successfully using magicmouse with my later-added built-in bluetooth module/adapter on both windows and ubuntu i have been trying to tweak the magicmouse scrolling speed with commands rmmod something, modprobe hid_magicmouse --scroll_speed=45 --scroll_acceleration=30 or something, then added a file `/etc/modprobe.d/magicmouse.conf". the mouse seemed to be working fine with these changes. now if i run commands like hcitool dev, the shell tells me that i do not have any "Devices" or "adapters". i seem to have bluez installed, because when i type "blue" then tab-autocomplete, a bunch of commands like bluez-test-device pops up. -- update -- some commands and their results: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool dev Devices: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool scan Device is not available: No such device easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: no Hard blocked: no easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

  Read the article

• Team Schedule

  - by THE

  .conf td{ width: 350px; border: 1px solid black; background-color: #ffcccc; } .myt table { border: 1px solid black; } .myt tr { border: 0px solid black; } .mytg td{ border: 1px solid black; padding: 5px; background-color:#808080; } .myt td{ border: 1px solid black; padding: 5px; } .myt th{ border: 1px solid black; padding: 5px; background-color:#c0c0c0; } So you want to meet the Proactive Support Technology Team?Here is where we can be found next: Conference Date Member link Oracle User Group Conference EPM & Hyperion 2012 23+24 October 2012 Maurice Bauhahn Grzegorz Reizer info Advisor Webcast: New features of HFM 17 November 2012 Grzegorz Reizer info OUG Ireland BI & EPM SIG Meeting 20 November 2012 Maurice Bauhahn info UKOUG 2012 Conference: ICC, Birmingham 3–5 December 2012 Ian Bristow info You will find this schedule via the link in the upper right section of this blog under "meet the team", or you can bookmark this post

  Read the article

• Blank Screen at boot Ubuntu 12.04 - nvidia-current - Macbook Air 3,2

  - by soulnafein

  I've installed nvidia-current using the Additional Drivers application in Ubuntu 12.04. I need those drivers so I can use accelerated WebGL. After installing the drivers, and rebooting X fails to start and I have a frozen system/dark screen. Below is the content of Xorg.0.log How can I fix this problem? [ 4.666] X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 4.666] X Protocol Version 11, Revision 0 [ 4.666] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 4.666] Current Operating System: Linux david-macbook-air 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 4.666] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=b3d5ae2a-72af-4ef9-b775-0d40b5f80f9b ro quiet splash vt.handoff=7 [ 4.666] Build Date: 29 August 2012 12:12:33AM [ 4.666] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 4.666] Current version of pixman: 0.24.4 [ 4.666] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 4.666] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 4.666] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 13 10:18:02 2012 [ 4.668] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 4.668] (==) No Layout section. Using the first Screen section. [ 4.668] (==) No screen section available. Using defaults. [ 4.668] (**) |-->Screen "Default Screen Section" (0) [ 4.668] (**) | |-->Monitor "<default monitor>" [ 4.668] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 4.668] (==) Automatically adding devices [ 4.668] (==) Automatically enabling devices [ 4.668] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 4.668] Entry deleted from font path. [ 4.668] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 4.668] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 4.669] Entry deleted from font path. [ 4.669] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 4.669] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 4.669] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 4.669] (II) Loader magic: 0x7f6222467b00 [ 4.669] (II) Module ABI versions: [ 4.669] X.Org ANSI C Emulation: 0.4 [ 4.669] X.Org Video Driver: 11.0 [ 4.669] X.Org XInput driver : 16.0 [ 4.669] X.Org Server Extension : 6.0 [ 4.670] (--) PCI:*(0:2:0:0) 10de:08a3:106b:00d3 rev 162, Mem @ 0x92000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00001000/128, BIOS @ 0x????????/131072 [ 4.670] (II) Open ACPI successful (/var/run/acpid.socket) [ 4.670] (II) LoadModule: "extmod" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 4.671] (II) Module extmod: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension MIT-SCREEN-SAVER [ 4.671] (II) Loading extension XFree86-VidModeExtension [ 4.671] (II) Loading extension XFree86-DGA [ 4.671] (II) Loading extension DPMS [ 4.671] (II) Loading extension XVideo [ 4.671] (II) Loading extension XVideo-MotionCompensation [ 4.671] (II) Loading extension X-Resource [ 4.671] (II) LoadModule: "dbe" [ 4.671] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 4.671] (II) Module dbe: vendor="X.Org Foundation" [ 4.671] compiled for 1.11.3, module version = 1.0.0 [ 4.671] Module class: X.Org Server Extension [ 4.671] ABI class: X.Org Server Extension, version 6.0 [ 4.671] (II) Loading extension DOUBLE-BUFFER [ 4.671] (II) LoadModule: "glx" [ 4.671] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 4.869] (II) Module glx: vendor="NVIDIA Corporation" [ 4.869] compiled for 4.0.2, module version = 1.0.0 [ 4.869] Module class: X.Org Server Extension [ 4.869] (II) NVIDIA GLX Module 295.40 Thu Apr 5 21:57:38 PDT 2012 [ 4.869] (II) Loading extension GLX [ 4.869] (II) LoadModule: "record" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 4.870] (II) Module record: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.13.0 [ 4.870] Module class: X.Org Server Extension [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension RECORD [ 4.870] (II) LoadModule: "dri" [ 4.870] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 4.870] (II) Module dri: vendor="X.Org Foundation" [ 4.870] compiled for 1.11.3, module version = 1.0.0 [ 4.870] ABI class: X.Org Server Extension, version 6.0 [ 4.870] (II) Loading extension XFree86-DRI [ 4.870] (II) LoadModule: "dri2" [ 4.871] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 4.871] (II) Module dri2: vendor="X.Org Foundation" [ 4.871] compiled for 1.11.3, module version = 1.2.0 [ 4.871] ABI class: X.Org Server Extension, version 6.0 [ 4.871] (II) Loading extension DRI2 [ 4.871] (==) Matched nvidia as autoconfigured driver 0 [ 4.871] (==) Matched nouveau as autoconfigured driver 1 [ 4.871] (==) Matched nv as autoconfigured driver 2 [ 4.871] (==) Matched vesa as autoconfigured driver 3 [ 4.871] (==) Matched fbdev as autoconfigured driver 4 [ 4.871] (==) Assigned the driver to the xf86ConfigLayout [ 4.871] (II) LoadModule: "nvidia" [ 4.871] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.887] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.887] compiled for 4.0.2, module version = 1.0.0 [ 4.887] Module class: X.Org Video Driver [ 4.892] (II) LoadModule: "nouveau" [ 4.894] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.894] (II) Module nouveau: vendor="X.Org Foundation" [ 4.894] compiled for 1.11.3, module version = 1.0.2 [ 4.894] Module class: X.Org Video Driver [ 4.894] ABI class: X.Org Video Driver, version 11.0 [ 4.894] (II) LoadModule: "nv" [ 4.895] (WW) Warning, couldn't open module nv [ 4.895] (II) UnloadModule: "nv" [ 4.895] (II) Unloading nv [ 4.895] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.895] (II) LoadModule: "vesa" [ 4.895] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.896] (II) Module vesa: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 2.3.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (II) LoadModule: "fbdev" [ 4.896] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.896] (II) Module fbdev: vendor="X.Org Foundation" [ 4.896] compiled for 1.11.3, module version = 0.4.2 [ 4.896] ABI class: X.Org Video Driver, version 11.0 [ 4.896] (==) Matched nvidia as autoconfigured driver 0 [ 4.896] (==) Matched nouveau as autoconfigured driver 1 [ 4.896] (==) Matched nv as autoconfigured driver 2 [ 4.896] (==) Matched vesa as autoconfigured driver 3 [ 4.896] (==) Matched fbdev as autoconfigured driver 4 [ 4.896] (==) Assigned the driver to the xf86ConfigLayout [ 4.896] (II) LoadModule: "nvidia" [ 4.896] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.896] (II) Module nvidia: vendor="NVIDIA Corporation" [ 4.896] compiled for 4.0.2, module version = 1.0.0 [ 4.896] Module class: X.Org Video Driver [ 4.896] (II) UnloadModule: "nvidia" [ 4.896] (II) Unloading nvidia [ 4.896] (II) Failed to load module "nvidia" (already loaded, 32610) [ 4.896] (II) LoadModule: "nouveau" [ 4.897] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 4.897] (II) Module nouveau: vendor="X.Org Foundation" [ 4.897] compiled for 1.11.3, module version = 1.0.2 [ 4.897] Module class: X.Org Video Driver [ 4.897] ABI class: X.Org Video Driver, version 11.0 [ 4.897] (II) UnloadModule: "nouveau" [ 4.897] (II) Unloading nouveau [ 4.897] (II) Failed to load module "nouveau" (already loaded, 32610) [ 4.897] (II) LoadModule: "nv" [ 4.897] (WW) Warning, couldn't open module nv [ 4.897] (II) UnloadModule: "nv" [ 4.897] (II) Unloading nv [ 4.897] (EE) Failed to load module "nv" (module does not exist, 0) [ 4.897] (II) LoadModule: "vesa" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 4.898] (II) Module vesa: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 2.3.0 [ 4.898] Module class: X.Org Video Driver [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "vesa" [ 4.898] (II) Unloading vesa [ 4.898] (II) Failed to load module "vesa" (already loaded, 0) [ 4.898] (II) LoadModule: "fbdev" [ 4.898] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 4.898] (II) Module fbdev: vendor="X.Org Foundation" [ 4.898] compiled for 1.11.3, module version = 0.4.2 [ 4.898] ABI class: X.Org Video Driver, version 11.0 [ 4.898] (II) UnloadModule: "fbdev" [ 4.898] (II) Unloading fbdev [ 4.899] (II) Failed to load module "fbdev" (already loaded, 0) [ 4.899] (II) NVIDIA dlloader X Driver 295.40 Thu Apr 5 21:38:35 PDT 2012 [ 4.899] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 4.899] (II) NOUVEAU driver Date: Wed Sep 12 13:42:43 2012 +0200 [ 4.899] (II) NOUVEAU driver for NVIDIA chipset families : [ 4.899] RIVA TNT (NV04) [ 4.899] RIVA TNT2 (NV05) [ 4.899] GeForce 256 (NV10) [ 4.899] GeForce 2 (NV11, NV15) [ 4.899] GeForce 4MX (NV17, NV18) [ 4.899] GeForce 3 (NV20) [ 4.900] GeForce 4Ti (NV25, NV28) [ 4.900] GeForce FX (NV3x) [ 4.900] GeForce 6 (NV4x) [ 4.900] GeForce 7 (G7x) [ 4.900] GeForce 8 (G8x) [ 4.900] GeForce GTX 200 (NVA0) [ 4.900] GeForce GTX 400 (NVC0) [ 4.900] (II) VESA: driver for VESA chipsets: vesa [ 4.900] (II) FBDEV: driver for framebuffer: fbdev [ 4.900] (++) using VT number 7 [ 4.902] (II) Loading sub module "fb" [ 4.902] (II) LoadModule: "fb" [ 4.902] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.902] (II) Module fb: vendor="X.Org Foundation" [ 4.902] compiled for 1.11.3, module version = 1.0.0 [ 4.902] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.902] (II) Loading sub module "wfb" [ 4.902] (II) LoadModule: "wfb" [ 4.903] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.905] (II) Module wfb: vendor="X.Org Foundation" [ 4.905] compiled for 1.11.3, module version = 1.0.0 [ 4.905] ABI class: X.Org ANSI C Emulation, version 0.4 [ 4.905] (II) Loading sub module "ramdac" [ 4.905] (II) LoadModule: "ramdac" [ 4.905] (II) Module "ramdac" already built-in [ 4.907] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 4.907] (II) Loading /usr/lib/xorg/modules/libfb.so [ 4.912] (WW) Falling back to old probe method for vesa [ 4.912] (WW) Falling back to old probe method for fbdev [ 4.912] (II) Loading sub module "fbdevhw" [ 4.912] (II) LoadModule: "fbdevhw" [ 4.912] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 4.912] (II) Module fbdevhw: vendor="X.Org Foundation" [ 4.912] compiled for 1.11.3, module version = 0.0.2 [ 4.912] ABI class: X.Org Video Driver, version 11.0 [ 4.912] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 4.912] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 4.912] (==) NVIDIA(0): RGB weight 888 [ 4.912] (==) NVIDIA(0): Default visual is TrueColor [ 4.912] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 4.912] (**) NVIDIA(0): Enabling 2D acceleration [ 5.442] (EE) NVIDIA(0): Failed to initialize the display subsystem for the NVIDIA [ 5.442] (EE) NVIDIA(0): graphics device! [ 5.442] (EE) NVIDIA(0): Failed to get supported display device(s) [ 5.442] (EE) NVIDIA(0): Failed to initialize dac HAL [ 5.442] (II) UnloadModule: "nvidia" [ 5.442] (II) Unloading nvidia [ 5.442] (II) UnloadModule: "wfb" [ 5.442] (II) Unloading wfb [ 5.442] (II) UnloadModule: "fb" [ 5.443] (II) Unloading fb [ 5.443] (EE) Screen(s) found, but none have a usable configuration. [ 5.443] Fatal server error: [ 5.443] no screens found [ 5.443] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 5.443] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 5.443] [ 5.447] ddxSigGiveUp: Closing log [ 5.447] Server terminated with error (1). Closing log file.

  Read the article

• Use TV (hdmi) with non-square pixels

  - by labsin

  I am having a problem when I connect my LG plasma tv (with a native resolution of 1024x768 pixels) to my 12.04 laptop. The pixels (actual pixels, not the signal) of my TV are stretched so it gets his 16:9 ratio. The pixels are rectangular (1.3333x1). Everything I display from my laptop oviously get stretched (4:3 stretched to 16:9). There is a different dpi in X and Y needed for it to display properly (some kind of anamorphic mode). Default Ubuntu uses a dpi of 96x96. I can change it using xrandr, but only square eg 100x100 or 70x70. Already looked here, but it seems Ubuntu totally ignore the displaySize in xorg.conf When I use the code below to see the dpi and nothing I do changes it. The displaySize also stays the same (calculated using 96 dpi and the resolution) xdpyinfo | grep -B2 resolution I use the propretary ATI drivers for my ATI Mobility Radeon HD 50xx but it is the same with the Radeon drivers. My temporary solution is to use: xrandr --output DFP1 --mode 1024x768 --scale 1.333333333333x1 --output LVDS --off But with this the right side of the screen is nog accesable. This is a known problem with xrandr --scale and ubuntu. This is because of a patch for the mouse/windows not going outside the screen. I search a way to change the DisplaySize or the dpi(to something not square like 128x96) when I connect the display.

  Read the article

• enabling a user (created with adduser command) for lightdm graphical login

  - by Basile Starynkevitch

  I just installed Ubuntu 12.04 AMD64 on a new (empty) hard disk (because the previous crashed) Since I am quite familiar with Debian, I created two accounts with the adduser command. Since I am also having an NFSv3 file system, I explictly gave user ids when creating them (for simplicity, I keep the same user id on the home server, running Debian; the user names contain digits; I'm not using LDAP), e.g. # grep bethy /etc/passwd bethy46:x:501:501:Bethy XXX,,,06123456:/home/bethy:/bin/bash # grep bethy /etc/group bethy64:x:501: # grep bethy /etc/shadow bethy46:$6$vQ-wmuchmorethings-2o/:15479:0:99999:7:: Of course /home/bethy exists The actual user name is slightly different, and I am not showing the real entries (for obvious privacy reasons) However, these users don't appear at graphical login prompt (lightdm). And they exist in the system, they have entries in /etc/passwd & /etc/shadow and I (partly) restored their /home I've got no specific user config under /etc/lightdm ; file /etc/lightdm/users.conf mentions # NOTE: If you have AccountsService installed on your system, then LightDM # will use this instead and these settings will be ignored but I have no idea of how to deal with AccountsService thru the command line As you probably guessed, I really dislike doing administrative tasks thru a graphical interface; I much prefer the command line What did I do wrong? How can a user entry not appear in lightdm graphical login? (I need to have my wife's user entry apparent for graphical login). I am not asking how to hide a user, but how to show it in lightdm graphical prompt work-around As I have been told in comments by Nirmik and by Enzotib, lightdm probably don't show any users of uid less than 1024. So I changed all the uid to be more than 8200 (including on the Debian NFS server) and this made all the users visible at the graphical prompt. It is a pain that such a threshold is not really documented.

  Read the article

• How to solve 404 for static files with Django and Nginx?

  - by Lucio

  I setup a Trusty VM with Django + Nginx (other stuffs too). The server is working, I get the "Welcome to Django" page. But when I enter to servername/admin it loads the HTML page but fails to load the static content. And the admin page have this links to static content: <link rel="stylesheet" type="text/css" href="/static/admin/css/base.css" /> <link rel="stylesheet" type="text/css" href="/static/admin/css/login.css" /> Both of the CSS files give me 404, as the Nginx log shows: 192.168.56.1 - - [05/Jun/2014:12:04:09 -0300] "GET /admin HTTP/1.1" 301 5 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0" 192.168.56.1 - - [05/Jun/2014:12:04:09 -0300] "GET /admin/ HTTP/1.1" 200 833 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0" 192.168.56.1 - - [05/Jun/2014:12:04:10 -0300] "GET /static/admin/css/base.css HTTP/1.1" 404 142 "http://ubuntu-server/admin/" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0" 192.168.56.1 - - [05/Jun/2014:12:04:10 -0300] "GET /static/admin/css/login.css HTTP/1.1" 404 142 "http://ubuntu-server/admin/" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:29.0) Gecko/20100101 Firefox/29.0" I think that the error is on my nginx.conf file, but do not know how to solve it.

  Read the article

• Nautilus file share for multiple users is not working. Only owner gets access.

  - by Niklas

  I have always had trouble setting up samba shares with ubuntu. In the past I've tried getting it to work by configuring /etc/samba/smb.conf but never achieved what I wanted. Last time I managed to get it working by making a share with nautilus built in file sharing (which utilises samba). Now when I try do it again I doesn't work. (running ubuntu 10.10 Desktop x64) What I'm trying to achieve is a share which is available for multiple users (those who are in the same group) and not just the owner (who also is included in the group). As it is now I can connect with only the owner, the others are getting an error when I try to connect with windows 7. All the users are within the same group and the folder permissions are 770. The files and folders have the correct group settings. I think there is no restrictions in the User Settings for the other users blocking them and I marked "make available to other users (or whatever it says)" in the file sharing dialog. What can I do?

  Read the article

• Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

  - by Alan Fietz

  I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

  Read the article

• DHCP server not starting

  - by Bruce

  I'm trying to set a DHCP server on 12.04. I installed: sudo apt-get install isc-dhcp-server My configuration files look like this: /etc/default/isc-dhcp-server INTERFACES="eth0" /etc/network/interfaces auto lo iface lo inet loopback /etc/dhcp/dhcpd.conf ddns-update-style none; default-lease-time 600; max-lease-time 7200; authoritative; log-facility local7; subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.235 192.168.1.240; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; option routers 192.168.1.1; default-lease-time 100000; max-lease-time 100000; } When I run sudo service isc-dhcp-server restart I get: stop: Unknown instance: isc-dhcp-server start/running, process 15384 After this if I run sudo service isc-dhcp-server status it shows that its stopped: isc-dhcp-server stop/waiting What am I doing wrong here?

  Read the article

• BCM4306, b43 legacy driver installed, but "firmware missing" error

  - by ScrollerBlaster

  I have the following wireless hardware on a Compaq evo N600c laptop running lubuntu latest. ciaran@compaq:~$ lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03) Following the instructions from here : http://www.linuxwireless.org/en/users/Drivers/b43#b43_and_b43legacy I opted for the legacy firmware installer, following instructions for internet install to the letter (with no errors). i.e. I successfully installed sudo apt-get install firmware-b43legacy-installer In the nm-applet I now get Wireless networks device not ready (firmware missing) I open up Additional Drivers, but the list is empty. I have commented out this line in /etc/modprobe.d/blacklist.conf #blacklist bcm43xx Contents of firmware dir: ciaran@compaq:/etc/modprobe.d$ sudo ls /lib/firmware/b43legacy/ [sudo] password for ciaran: a0g0bsinitvals2.fw a0g0initvals5.fw b0g0bsinitvals2.fw b0g0initvals5.fw ucode11.fw ucode5.fw a0g0bsinitvals5.fw a0g1bsinitvals5.fw b0g0bsinitvals5.fw pcm4.fw ucode2.fw a0g0initvals2.fw a0g1initvals5.fw b0g0initvals2.fw pcm5.fw ucode4.fw Edit: from dmesg: [ 4460.193382] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 4460.193393] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 4460.193401] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. Yours in hope.

  Read the article

• Xubuntu 14.04 with Compton, strange screen tearing, only when playing videos though (advice needed)

  - by LinuxDudester

  Hello beloved community, Yet again I am in need of your great expertise. I ran into a very strange issue and just can't wrap my mind around it. I'm running Xubuntu 14.04 exclusively, with Compton installed. The OS runs great and I have absolutely no screen tearing when I move my windows around, scroll in my web browser, work in Gimp or Photoshop (wine) or even when I play very graphic demanding games, like Metro Last Light, Euro Truck Driver 2 and so on. There's not a tiny bit of tearing to see, but as soon as I play videos, in xbmc, vlc or parole media player the tearing begins (strangely enough this does not apply to youtube videos). I followed all available workarounds on askubuntu and the ubuntu forum,like the 50-xserver-command.conf, startx /etc/X11/Xsession /usr/bin/xbmc-standalone -- -bs or libsdl1.2debian fix and many more, but to no avail. I also tried the Open Source Nouveau display drivers as well, but for some odd reason they don't work so great on my system or at least with my graphics card. Even with Compton installed and configured, I have an extreme amount of screen tearing, as soon as I switch to the proprietary Nvidia drives the screen tearing is gone completely, except for the video playback with xbmc, vlc or parole media player. System info for your reference: OS: Xubuntu 14.04 Linux-x86_64 - Processor: Intel Core i7-4770S CPU @ 3.10GHz - Ram: 16 GB - GeForce GT 750M 1024 MB - Nvidia Driver: 331.38 Has anyone experienced such an odd issue or do you have any advice on how I could fix this? I would appreciate any help! Have a nice day!

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >