Search Results

Search found 19125 results on 765 pages for 'hard disk'.

Page 135/765 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• which drive do I mount

  - by Crash893

  I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

  Read the article

• How can I connect to my Airport Extreme Shared Disk using Windows?

  - by matt ryan

  I have a shared disk attached to my Airport Extreme, which I can connect to remotely in OS X through the finder via command - k, and entering in the proper address: afp://test.dyndns.org:1111 1111 being the port I've reserved for the disk in the AE port mapping. This is such a great feature, but I don't always have access to a Mac. My question is how can I connect to this drive via Windows XP? Please note, that the shared drive is a Drobo FS and formatted to handle both Windows and Mac OS. I've tried mapping a network drive via My Computer - Tools - Map Network Drive and entering: \\test.dyndns.org:1111\Drobo-Name I've also tried Start - Run and entering the same, both with and without the port #.

  Read the article

• USB sector 0 not fount Kingston USB DT100 G2

  - by java

  Windows constantly asks me "Foramt Disk". when i go to command prompt and type format H: /fs:ntfs or format H: /fs:fat32 response: Cannot determine the number of sectors on this volume. if the benefit DISKPART detail disk Kingston DT 100 G2 USB Device Disk ID: 00000000 Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : No Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No DISKPART detail volume Read-only : No Hidden : No No Default Drive Letter: No Shadow Copy : No Offline : No BitLocker Encrypted : No Installable : No Volume Capacity : 0 B Volume Free Space : 0 B what the problem?

  Read the article

• Moving files from Public folder to C: takes a minute, even though they are same hard drive and same

  - by Jian Lin

  I have a big file, like 2GB, and would like to move it from Network -> Bookroom -> Users -> Public (this is the computer in the bookroom in the house) to c:\myfiles and they are actually on the SAME hard drive (and same partition). But copying still takes a minute or so? I thought if on the same hard drive and partition, then it is a "move" and it should take 2, 3 seconds only. that public folder also is \\Bookroom\Users\Public Update: Sorry, I actually mean "move" all the way... so it is not copy but move. So that's why I thought it should take 2, 3 seconds only.

  Read the article

• machine crash when connecting to external harddisk

  - by Gnot

  i recently had a problem with my laptop. when i booted up the machine, i would get a SMART failure error message and when i pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. thinking that my hard disk was dying, i bought a new hard disk and installed on my laptop and so now my laptop is alright. however i need to recover data from that old hard disk, so i bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. the first few times when i connected, i could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. but now whenever i connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. do you think my old hard disk is dead beyond repair? or you can offer some help here? any assistance would be appreciated!

  Read the article

• Get error (Repair Filesystem) 1 # when I install 4 new Hard drives in RedHat Linux 5 on a Dell PowerEdge 2900

  - by Alos Diallo

  Hi I am using a Dell PowerEdge 2900 running RedHat 5. I had 4 drives in the system using a Raid 5, I purchased and installed 4 more drives keeping the configuration the same. Set up the Vertual disks in PERC 6/i. When I exit out and reboot the system I get the following: fsck.ext3: No such file or dirrectory while trying open /dev/ddb1 [FAILED] ***An error occurred during the file system check. ***Dropping you to a shell; the system will reboot ***when you leave the shell. Then am prompted for the root pw. I enter it and am then prompted with: (Repair filesystem) 1# if I type fdisk -l I get some info on the disk along with: Disk /dev/sdb doesn't contain a valid partition table I am then prompted for (Repair filesystem) 2# If I reboot I am taken to the same screen again. The system was working before this happened. Does anyone know why this is happening and or what I can do to fix it? Thanks

  Read the article

• Copying files from Public folder to C: takes a minute, even though they are same hard drive and same

  - by Jian Lin

  I have a big file, like 2GB, and would like to copy it from Network -> Bookroom -> Users -> Public (this is the computer in the bookroom in the house) to c:\myfiles and they are actually on the SAME hard drive (and same partition). But copying still takes a minute or so? I thought if on the same hard drive and partition, then it is a "move" and it should take 2, 3 seconds only. that public folder also is \\Bookroom\Users\Public

  Read the article

• Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

  - by Carl

  I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

  Read the article

• In CentOS 4.3 Webmin 1.3000 bandwidth monitoring is eating disk space. How to delete those files?

  - by Silkograph

  I maintain Linux server being used for Mail, Squid and DNS service. Recently I observed that something was eating server disk space. But at last, today I caught the culprit which was consuming the disk by storing large number of files. On this server, Webmin 1.300 is installed. We use Squid proxy and Sarg to monitor Internet access. I always manually clear Sarg generated files under /var/www/html/squid for last few years. But I never realized that Webmin is also storing some kind of bandwidth log files in its' directory structure. I have noticed that under /etc/webmin/bandwidth/hours it has stored more thousands of files since year 2007 totaling about 17 GB. We have used 40 GB HDD for this server machine. My question is how can I delete those (/etc/webmin/bandwidth/hours) files safely?

  Read the article

• How to configure Time Machine to also backup an connected external hard drive?

  - by Another Registered User

  I've inserted a sweet SSD into my MacBook Pro, but it had limited space. So I had to export 60 GB of Data to an external hard drive. But now, when I run TimeMachine to backup my stuff, of course it only backups what's on the system disk. Is there a way how to also backup the connected external hard drive together with TimeMachine? Maybe there's a trick to get this work, with a fake folder that's actually the mounted drive? What could I do?

  Read the article

• How is the 137GB limit counted in Virtual PC (two systems on one disk)?

  - by Nux

  I have a dual boot (Win7, XP) physical machine on my old computer which I want to virtualize and move to my new one. So I've uninstalled everything that I can and run shrink from RescueCD (used GParted). Now I have two about 80GiB partitions with a gap between them, so still this seem to be above the given limit. Still the resulting VHD (made with Disk2vhd) is much below the limit (about 110GiB) and both partitions are below the limit. So my question is - is it failing due to the limitations of disk size for VPC or is failing simply because it's a dual boot system. Or maybe it would work if I would move partitions to be close to each other (the gap between them is about 171GB and the whole physical disk is 1TB)?

  Read the article

• After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports.

  - by sin

  I have a big problem! After making boot disk using rufus in usb 3.0 port, it doesn't work in another ports. I have to install windows in other PC which has usb 2.0port only! so I made usb booting disk using usb 3.0 in 3.0 port. but after that it never worked except in 3.0 ... and I could't restore my usb. I alredy fomated in cmd and others in usb3.0 port! but there is no change. and I couldn't find it in usb 2.0 port. plz help me.

  Read the article

• How do I get a USB hard-disk adaper to work with a PCMCIA USB card?

  - by Carl

  I have a PCMCIA (Cardbus) 32bit USB 2.0 2-port card. If I plug my MP3 player in it works fine. I have a USB adapter for a hard disk drive. When I plug that into the PCMCIA USB slot the light on that hard disk flashed between red and green - it should stay green. "USB Mass Storage device" is added in the Device Manager, but no drive letter appears in My Computer. The installing device icon down by the clock never goes away. (Windows XP SP3.)

  Read the article

• can I create disk partition for dual-boot Ubuntu on Windows 7 machine without Windows reinstall?

  - by EndangeringSpecies

  I want to setup dual boot Ubuntu on my machine in a separate partition. Plus, ideally, I want to get another, 3rd, partition for further OS experimentation. The hard drive is huge, hundreds of gigs, and essentially unfilled. The machine runs Windows 7 Home. Online I have seen mention of creation of partitions from inside Windows 7. But, I have also heard claims that to create the partition to house Ubuntu Windows has to be reinstalled, frying all the data on the machine. So, which one of these claims are right? Can you create additional partitions for other OS on a big Windows 7 hard drive without reinstall?

  Read the article

• Laptop crashes when connecting to external harddisk

  - by Gnot

  I recently had a problem with my laptop. when I booted up the machine, I would get a SMART failure error message and when I pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. Thinking that my hard disk was dying, I bought a new hard disk and installed on my laptop and so now my laptop is alright. However I need to recover data from that old hard disk, so I bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. The first few times when I connected, I could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. But now whenever I connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. Do you think my old hard disk is dead beyond repair? Or you can offer some help here? Any assistance would be appreciated!

  Read the article

• Best alternatives to recover lost directories in FAT32 external hard drive?

  - by Sergio

  I have an 320 GB ADATA CH91 external hard drive. I guess it has some problems with the connector of the USB jack. The point is that in certain occasions it fails in write operations generating data losses. Right now I lost a directory with several GB's of very useful information. Since then I have not attempted to write to the disk any more. What tool would you recommend to recover the lost data? The disk is FAT32 formatted (only one partition) and I use both Linux and Windows. What filesystem format would you recommend to avoid future data losses? I currently only use this external hard drive in Linux so there are several available choices (FAT, NTFS, ext3, ext4, reiser, etc.).

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How do you do the offsite hard drive backups?

  - by kentchen

  I have been doing hard drive backups for a while, which I believe a lot of you guys do as well, but am having trouble figuring out a better way storing them offsite. I am wondering how you guys out there do that. Any policy or tips & tricks when it comes to offsite store your backups, mainly hard drives not tapes. Thanks in advance. [update] Thanks for mentioning the online backup. We are actually in the middle of this process. And I 100% agree that it's the ultimate way to go. However, considering the cost, sometimes it may not be the option, as it's a quite expensive option if you also consider the application level. I guess online backup can be a very good one in the separate topic. :)

  Read the article

• PC won't boot, even into bios

  - by divided

  Here's the deal: I cleaned a hard drive of some viruses (externally) and put it back into the original pc. This hard drive will boot in any other pc except the original pc. When I try other hard drives in the original pc, they are able to boot. The drive has Windows XP. What is the problem? How can I get this hard drive to work properly? The original hard drive works in other PCs. The PC boots with other hard drives acting as the master. If I boot with no hard drive, I still can't get into the BIOS These are all IDE hard drives The PC doesn't beep, it just boots into a black screen with a cursor blinking in the upper left of the screen

  Read the article

• MacPorts: is it possible to move /opt/local on a different disk?

  - by compriots

  Is there a secure procedure to move the macports directory strucutre on a non-root partition or disk?

  Read the article

• Fedora 14 - Error 5 - No space on Disk - After installation.

  - by amitahire

  I am new to Fedora, am still figure my way through it. I was going about tweaking it and preparing it to my needs, While installing through yum I dont have much other than the fact that I have to search for the packages. But when I open "Add/remove software" of Fedora. I am greeted with " No space left on the disk" and when I seek for more details it says " Disk Error :[errno 5] Input/output error" I did some research and I saw that it usually occurs during installation, but here I have successfully installed it. Can someone help me with it? Later on I even had notification of the same warning. And mind you I got loads of free space. Thanks for the help

  Read the article

• Why Virtualbox VDI doubles the space of the VM hard disk?

  - by logoff

  I have one Xubuntu 12.10 64 bit Virtualbox VM on a Windows 7 64 bit host. It has one dynamic allocated hard disk with VDI format with maximum capacity of 20GB. If I use a command df -h in the VM I get that 5.3GB are in use in th main partition. I have only 2 partitions, one for the ext4 hard disk and another with 512MB of swap. I have no snapshots. The VDI file of this VM has 10.7GB. It is normal this difference of space? It is caused because the VDI format?

  Read the article

• How to reduce Fedora's disk size in VMware player.

  - by user428862

  I'm new to Fedora 14, vmware player. After getting Fedora up and running in VMware player. The disk size was 2.7 GB. After three hours of working with it, the disk size has bloated to 4.3 GB. I havent added software to account for the near doubling in size. How do I reduce the size back to 2.7GB range or lower. Im new to Fedora and superuser controls. Im removing more software than adding software. Is this a VMWARE problem or Fedora problem?

  Read the article

• Is there a way I can find if my hard disk data was stolen? [closed]

  - by Bridget

  How can I tell if the repair shop stole my hard drive? I had my computer in the shop for a couple of days to get a diagnostic check and he quoted me $130. I have a family member who said he would do it for $30 so I rejected the offer and requested it back. When he returned it I hooked it back up and now I get a low disk space warning; when I dropped it off I had at least 50 gb of space left, on a total of 149 gb and all my pictures movies, and music are gone. Can I find if he indeed did steal my hard drive or something?

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >