Search Results

Search found 4442 results on 178 pages for 'html5 filesystem'.

Page 135/178 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• How to automatically copy a file uploaded by a user by FTP in Linux (CentOS)?

  - by Buttle Butkus

  Outside contractor says they need read/write/execute permissions on part of the filesystem so they can run a script. I'm ok with that, but I want to know what they're running, in case it turns out there is some nefarious code. I assume they are going to upload the file, run it, and then delete it to prevent me from finding out what they've done. How can I find out exactly what they've done? My question specifically asks for a way of automatically copying the file, which would be one way. But if you have another solution, that's fine. For example, if the file could be automatically copied to /home/root/uploaded_files/ that would be awesome.

  Read the article

• Cannot to change my root password on Xenserver

  - by Michlaou

  I try to change my root password on my Xenserver 6.0. I follow these steps: enter boot: menu.c32 selecet xe-serial and press tab add "single" before the 2nd triple hyphens and i press enter. I have that: mboot.c32 /boot/xen.gz com1=115200,8n1 console=com1, vga mem=1024G dom0_max_vcpus4 dom0_mem=752M lowmem_emergency_pool=1M crashkernel=64M@32M single --- /boot/vmlinuz-2.6-xen root=LABEL=root-rodraxar ro console=tty0 xencons=hvc console=hvc0 --- /boot/initrd-2.6-xen.img I have commande on the screen and it's stop at: ext3-fs: monted filesystem with ordered data mode. Can you help me?

  Read the article

• Turning a running Linux system into a KVM instance on another machine

  - by Charles

  I have two physical machines that I wish to virtualize. I can not (physically) plug the hard drives from either machine into the new machine that will act as their VM host, so I think that copying the entire structure of the system over using dd is out of the question. How can I best go about migrating these machines from their hardware to the KVM environment? I've set up empty, unformatted LVM logical volumes to host their filesystems, with the understanding that giving the VMs a real partition to work with achieves higher performance than sticking an image on the filesystem. Would I be better off creating new OS installs and rsyncing the differences over? FWIW, the two machines to be VM'd are running CentOS 5, and the host machine is running Ubuntu Server 10.04 for no particularly important reason. I doubt this matters too much, as it's still going to be KVM and libvert that matter.

  Read the article

• Best server sync software/methods [closed]

  - by Meep3D

  I have a test server at home and a test server at the office. I'd like to somehow sync multiple folders in both directions automatically so I can work at home and to also provide an offsite backup. I've tried Live Sync (Microsofts own product) but it chokes on large amounts of files and seems a bit rudimentary. Dropbox is also a bit small and does not adapt to our filesystem setup. I have seen a few online backup services but none seemed geared to multiple computers using the same account. I don't mind paying a monthly fee provided the service is good. Suggestions would be greatfully appreciated!

  Read the article

• Apache .shared folder

  - by Kevin

  There are already a bunch of rules in my Apache configuration. What I want to add is the following. There are some shared folders (.shared): /var/www/.shared/ and /var/www/.include/.shared/ and /var/www/.include/(.*)/.shared/. Now when someone visits http://domain.com/test.png it first executes the existing apache rules and will (when the file/folder was not found) look in those .shared folders. So suppose I've got this filesystem: /var/www/.shared/dog.png /var/www/.shared/test.gif and /var/www/domain.com/dog.png. Now when someone visits http://domain.com/test.gif, it must load the test.gif from the .shared folder. Now when someone visits http://domain.com/dog.png it must load the dog.png from the domain.com folder (because the existing apache rules will be executed first).

  Read the article

• Can I lvreduce after lvextend without losing the ext4 partition inside it?

  - by DrSAR

  In a botched attempt to move my root partition from one disk to another I have done the following: added new disk partitioned it with parted (part #3 is now almost totally filling the disk) initialized a physical volume $ pvcreate /dev/sdb3 Physical volume "/dev/sdb3" successfully created extended the volume group to include this new physical disk $ vgextend myvg /dev/sdb3 Volume group "myvg" successfully extended extended the logical volume (I think this is where I ballsed it up: I think I should have pvmove'ed stuff to the new pv in that group - can someone confirm?) $ lvextend /dev/mapper/myvg-root /dev/sdb3 I would now like to undo the lvextend and then proceed with the original plan of moving the content of the old physical volume over to the new physical volume. Can I reduce the logical volume (I have not yet touched the ext4 partition that sits in /dev/mapper/myvg-root with something like resizefs) without fear of damaging the ext4 filesystem? If so, how do I tell it to reduce by exactly the right amount? $ lvreduce --by-exactly-the-amount-occupied-by-PV /ev/sdb3 /dev/mapper/myvg-root

  Read the article

• Shrink NTFS Partition Windows 2003

  - by Coops

  We have an iSCSI target provided by a CentOS server attached to a Windows Server 2003 Standard box, formatted in NTFS. My question is this - I know we can resize the backend block device fine (LVM et al.), however how do you tell Windows the NTFS filesystem has shrunk afterwards? [note we want to shrink]. I'm imagining a world of pain if it's not done correctly! This is a production box, so ideally we'd like the process to keep the drive mounted and online during the process, but downtime can be scheduled if need be. 90% of what I've found on the subject so far basically involves using the 'ntfsresize' command in Linux to do the job -- but surely Windows can do this itself? Cheers!

  Read the article

• Hard drive partition size wrong. How do I resize without loss of data?

  - by BreezyChick89

  $ fsck fsck from util-linux 2.20.1 e2fsck 1.42 (29-Nov-2011) The filesystem size (according to the superblock) is 610471680 blocks The physical size of the device is 536870911 blocks Either the superblock or the partition table is likely to be corrupt! It should be 1 partition but it now shows 2.2tb partitioned and .3tb unpartitioned How do I make the first partition correctly be 2.5tb without destroying whatever is in either partition? I did not raid or anything. My devices have been getting repeatedly corrupt by thunderstorms. Looks like people recommend doing something like in other places. sudo resize2fs /dev/sdc1 610471680

  Read the article

• Does "I securely erased my drive" really work with Truecrypt partitions?

  - by TheLQ

  When you look at Truecrypt's Plausible Deniability page it says that one of the reasons for partition with solely random data is that you securely erased your drive. But what about the partition table with full disk encryption? How can you explain why the partition table says there's a partition of unknown type (With my limited knowledge of partition tables I think that they store all the partition filesystem types) and with solely random data? It seems that if your going to securely erase the drive you would destroy everything, including the partition table. And even if you just wiped the partition, the partition table would still say that the partition was originally NTFS, which it isn't anymore. Does the "I securely erased my drive" excuse still work here? (Note: I know that there's hidden truecrypt volumes, but I'm avoiding them due to the high risk of data loss)

  Read the article

• Is ceph usable with only 100Mbps bandwidth between nodes?

  - by vaab

  I haven't great hardware, but my requirements are low, I would like to start using ceph so as to abstract filesystem location and allow potential easy scaling to bigger hardware in an hypothetical future. My actual hardware meets ceph hardware requirements except the ethernet bandwidth part between the hosts. Mine is 100 Mbit/s which is much lower than the 1Gbps expected in ceph, even from the minimal requirement. Will I be able to use ceph in a very small smili-prod environnement (with limited number of clients) ? FYI: My hardware is 2 or maybe 3 hosts having each 4 core Intel, 24Go RAM, 2x2To disks but 100Mpbs between them.

  Read the article

• Running suspicious X programs in GNU/Linux

  - by Vi

  What the most harmful thing can malware program started as separate limited user account do if it has access to the X server? Network and filesystem things are already considered by chroot and netfilter. It obviously can lock the screen and I will need to switch to other vt and kill it manually. Can it for example disrupt other GUI programs on the same X server (access to root terminal in nearby window)? I know that it is safer to run it in separate X server, for example, in Xtightvnc or even some virtual machine, but how dangerous is to just run it like other programs?

  Read the article

• Filename Case issue with over WebDav

  - by user98365

  We are accessing SAMBA shared directory from a Windows Client with WebDav client WebDrive. But we are having the issue that it is showing same contents in both the directories ( data/ & Data/ ) though they are entirely different. I know this is because of Windows Filesystem being case insensitive and Linux being Case Sensitive. is there any solution for this? We had the same issue when viewed through the SAMBA mounted directory but we solved it by editing the SMB.conf as said in the following link Does Samba work well with Windows when case-sensitive names are enabled? Please help to solve this when accessed from the WebDav

  Read the article

• System restore with no mouse or keyboard.

  - by user62371

  I accidentally installed some USB drivers to my Windows 7 system, they were the wrong ones and now my keyboard and mouse won't work. A system restore would get rid of them, but obviously I can't control my computer to make that happen. Keyboard and mouse still work before windows has loaded, in the BIOS and boot system, so can I do anything from there? I've already tried booting into another OS, accessing my windows filesystem and deleting the Program Files entry, but it didnt work so they must go deeper than that. Or could i launch it from a remote machine? I've got some VNC server insalled so if i could get that running that could work.

  Read the article

• Error : [0.8879153] kernel panic -not syncing VFS unable to mount fs unknow block (8.3)

  - by user43069

  i installed ubuntu using wubit inside the windows and started working on it then i got this error afer updating [0.8879153] kernel panic -not syncing VFS unable to mount fs unknow block (8.3) and i can't user rescue mode and it's give me another error no filesystem could mount root ..... i looked at grub folder and didn' find any file on disks/boot/grub/ so i tryed to user super grub to fix it but it didn' work and it keep giving me. boot/grub/stage1 not found i didn't edit anything from grub folder. any idea plz .

  Read the article

• How can I launch a local application remotely?

  - by yungsters

  I use TextMate on Mac OS X to develop. The files I need to edit are on a Linux machine, and I have the Linux filesystem mounted on my Mac OS X. Opening the files and saving them in TextMate is not a problem. What I want to do (from my Mac OS X) is be able to... SSH <linux> cd <folder> mate <filename> I want that to open up the file in TextMate on my Mac OS X (thus, shifting focus from my Terminal.app to TextMate.app). How can I achieve this effect?

  Read the article

• Windows 7 won't recognize my second hard drive after reinstall

  - by Shadur

  I recently suffered a total hardware crash on my windows C: drive. Fortunately, I had a spare disk on hand and set about reinstalling. For some reason, during the install it decided to declare my second windows drive as the booting drive, but once the installation was completed it completely and utterly refuses to acknowledge the filesystem -- I'm not even seeing a drive letter, while it /does/ find the linux partitions on the other two drives (even if it can't read any of them). My first (and most important) question: How can I get windows to re-acknowledge the drive, preferably without losing all the data on it? My second question: How can I tell windows to set up its boot loader on the new C: drive?

  Read the article

• Why does Mac OS X auto-mount the (disabled) home folder?

  - by NStal

  I've just bought a MacBook Pro. Now I'm trying to build up a filesystem (just some path) that looks like my Ubuntu server. By doing so, I can reuse a lot of the scripts I've written before. I found that Mac OS X auto mounts home with map auto_home, which prevents me from even making a symbolic link. I managed to solve this problem from the solution here. It mentioned that Time Machine will auto-exclude the home folder. But I'm wondering why, this is confusing.

  Read the article

• how to find out what is causing huge dentry_cache usage?

  - by Piavlo

  Note that inode_cache & ext3_inode_cache slabs are very small compared to dentry_cache. What happens is that slowly and steadily the within a week dentry_cache grows from 1M to ~5-6G Then I need to run echo 2 > /proc/sys/vm/drop_caches && echo 0 > /proc/sys/vm/drop_caches This started to happening one day on all servers hosting some web code - the developers are saying that they have not changed anything related to filesystem access pattern around the time then the problem started. The system is centos5 with 2.6.18 kernel so I don't have any instrumentation features available th newer kernels. Any I idea how I can debug the problem? maybe with systemtap? This is a ec2 instance - so not even sure that systemtap will work there. Thanks Alex

  Read the article

• Firefox jQuery Drag and Drop File Upload together with PHP

  - by tonsils

  Hi, Hoping to get some assistance but I am after a jQuery/PHP means of allowing a user to drag and drop files and then via PHP, upload one or more files to a specific directory on a Linux box. I only have Firefox 3.6 as my base browser but can also move to FFox if need be. Cann use any HTML5 features as long as I'm using Firefox 3.6 Can someone possibly point me to any examples/sites where this process is demonstrated? I have had a look at http://www.plupload.com/index.php but this does not work in IE6. As mentioned, would like it to work in FFox only. Thanks.

  Read the article

• What way to use the CGContext to draw is suitable?

  - by Tattat

  I know that the CGContext cannot call it to draw directly, and it needs to fill the drawing logic in the drawInContext, and call the CGContext to draw using "setNeedsDisplay", so, I designed a cmd to execute, but it cause some problems... like this : http://stackoverflow.com/questions/2617827/why-i-cant-draw-in-a-loop-using-uiview-in-iphone I think the CGContext is very different from my previous programming experience....(I used HTML5 canvas, that allow me add more details, after I draw, so do the Java Swing) Actually, I want to know what is the suitable to implement these kind of thing in Apples' programmer mind. Thz.

  Read the article

• Canvas context used but not updated on canvas

  - by John Doe

  I am developing an small html5 game, where I have the following code: if(object.blocks){ var blocks = object.blocks, that = this; each(blocks,function(index){ that.blocks.push(new Block(this[index])); }); } I receive an object with some configuration and instantiate blocks with it. It works fine, but the Block class has an method, called draw: this.draw = function (ctx){ if(ctx){ var colors = ['#FF0000','#FFFF00','#0000FF','#00FF00'], color = Math.round(Math.random() * colors.length-1); ctx.fillStyle = colors[color]; ctx.fillRect(this.x,this.y,this.width,this.height); } }; It was working before I moved it into the Block class, but now it draws nothing. This is the code that calls draw: render: function(ctx){ each(this.blocks,function(index){ this[index].draw(ctx); }); } The context comes from the html page, from the main canvas.

  Read the article

• SQLite character encoding for Google Gears

  - by MHD

  We're using jQuery to get a JSON-string from our server (UTF-8 response, also UTF-8 request through jQuery) and put this JSON into a Google Gears WorkerPool. This workerpool processes the JSON and stores it into a Gears database (SQLite). It turns out that, apparently, SQLite stores data using iso-8859-1 rather than UTF-8. Since we're trying to store user names that might contain Cyrillic characters (and others that you might encounter in Europe), this goes horribly wrong. Can anyone tell me how to change the character encoding in either the Gears WorkerPool or the SQLite database that Gears employs? Of course, if I'm looking in the wrong direction with my problem, feel free to offer alternatives! Unfortunately, HTML5 isn't an option as we're supposed to support IE7 primarily.

  Read the article

• CSS3 transparent gradient similar with Photoshop ColorPicker

  - by Mircea

  I try to create a transparent gradient with CSS. I need it for a color picker app. I have a transparent PNG I could use but its is 20kb large and would request a new HTTP request. The code should be ultralight. Here is what I've done so far: http://jsfiddle.net/78SEK/ The one above its the good one and the bottom one is made with CSS. I had also tryd something with HTML5 Canvas but I could not get the exact match. Is there a way I could do this? Thanx

  Read the article

• How does jQuery stores data with .data()?

  - by TK

  I am a little confused how jQuery stores data with .data() functions. Is this something called expando? Or is this using HTML5 Web Storage although I think this is very unlikely? The documentation says: The .data() method allows us to attach data of any type to DOM elements in a way that is safe from circular references and therefore from memory leaks. As I read about expando, it seems to have a rick of memory leak. Unfortunately my skills are not enough to read and understand jQuery code itself, but I want to know how jQuery stores such data by using data(). http://api.jquery.com/data/

  Read the article

• setTimeout(fun) with a single argument

  - by Elazar Leibovich

  The HTML5 specifications states that setTimeout can be run without the additional "timeout" argument which is supposed to say after how many milliseconds will the function "handler" be scheduled. handle = window . setTimeout( handler [, timeout [, arguments ] ] ) Schedules a timeout to run handler after timeout milliseconds. Any arguments are passed straight through to the handler. However, I failed to find anywhere which explains what happens when no "timeout" time period is set. An example usage is, the animation implementation int the Raphael library. animationElements[length] && win.setTimeout(animation);

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >