Search Results

Search found 4442 results on 178 pages for 'html5 filesystem'.

Page 140/178 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• Unable to mount an LVM Hard-drive after upgrade

  - by Bruce Staples

  I imagine this is a basic gotcha ... but I can't see it. I have a system with 2(physical) harddrives. The boot system (/dev/sda) was running 10.04 & the second drive (/dev/sdb) was just a mounted filesystem. I did a clean load of Ubuntu 12.04 overwriting /dev/sda (not an upgrade) & now cannot mount the second drive. so I do not know what to enter it into the fstab ... I had expected to use: /dev/sdb /tera ext4 defaults 0 2 But even manual mounting fails (I also have tried various "-t" options on the off chance!) sudo mount -t ext4 /dev/sdb1 /tera mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Output from disk queries indicate that it is a Linux LVM & a healthy disk still. sudo lshw -C disk *-disk:0 description: ATA Disk product: WDC WD5000AACS-0 vendor: Western Digital physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WCASU1401098 size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00015a55 *-disk:1 description: ATA Disk product: WDC WD10EADS-00L vendor: Western Digital physical id: 1 bus info: scsi@3:0.0.0 logical name: /dev/sdb version: 01.0 serial: WD-WCAU47836304 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sudo fdisk -l Disk /dev/sda: 500.1 GB, 500106780160 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976771055 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00015a55 Device Boot Start End Blocks Id System /dev/sda1 * 2048 972580863 486289408 83 Linux /dev/sda2 972582910 976769023 2093057 5 Extended /dev/sda5 972582912 976769023 2093056 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1953525167 976762583+ 8e Linux LVM LVM doesn't appear to be an option for mount or fstab. ... and here's a Smart data Screenshot from Disk Utility.

  Read the article

• How can I play .bin file with VLC?

  - by freebird

  For two days I have tried to get vlc play this .bin file. I played it fine in windows xp using vlc. So I decided to install same vlc thats on my xp partition and it plays through Wine the file no problem. Why won't it play natively? fr33bird@fr33bird-desktop:~/Downloads/********/*********$ vlc ********.bin VLC media player 1.1.10 The Luggage (revision exported) Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS") Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE") [0x8387914] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. Blocked: call to setlocale(6, "") Warning: call to srand(1309627174) Warning: call to rand() Blocked: call to setlocale(6, "") (process:14474): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. Blocked: call to setlocale(6, "") libdvdnav: Using dvdnav version 4.1.3 libdvdread: Using libdvdcss version 1.2.10 for DVD access libdvdread: Can't stat /home/fr33bird/Downloads/*******/*******/*******.bin No such file or directory libdvdnav: vm: failed to open/read the DVD [0x87034e4] filesystem access error: cannot open file /home/fr33bird/Downloads/*****/*****/*******.bin (No such file or directory) [0x843535c] main input error: open of `file:///home/fr33bird/Downloads/******/****/********.bin' failed: (null) Funny it says no such file even thou it's attempting to read it. Xine says that the .bin is encrypted so I installed libdvdcss2 w32codecs ubuntu-restricted-codecs from Medibuntu still same issue. How can I fix this? I want to run this natively not through wine. I Even tried to change .bin to .mpg and .avi.

  Read the article

• Connect to NFS on availability

  - by berkes

  What would be a good way to automatically mount an NFS when it gets/is available? I have the following: Media server at home, running Ubuntu, 10.10 with GUI *) Laptop often at home, often on the road or at clients. Ubuntu 10.10 with GUI. What I'd like is my laptop connecting to the nfs (or any other mountable networked filesystem) so that Banshee sees all the music, new podcast-entries (and video) from that media-server. I already have firefly (mt-daapd) running, which works, but is flakey on both server-side and client-side. But its biggest downside, is that I cannot easily fix metadata on files on the media-server this way. DAAP is read-only by design. I can mount nfs manually, through a sudo mount /media/nfsmultimedia/. I am not looking for a manual, or howto on setting up a NFS client and server. Merely a way to have this more transparently working. Obviously I'd like the NFS to be unmounted if the network is no longer available (i.e. when I open my laptop-lid on my clients buro). It may be, that an NFS is not suited for this, in that case, I'd love to hear other options. :) *) Actually: I also have a fileserver, backupserver and webserver to which I'd like to connect in a somewhat similar way. Right now I connect to these over SSH, using gvfs.

  Read the article

• Dynamically load images inside jar

  - by Rahat Ahmed

  I'm using Slick2d for a game, and while it runs fine in Eclipse, i'm trying to figure out how to make it work when exported to a runnable .jar. I have it set up to where I load every image located in the res/ directory. Here's the code /** * Loads all .png images located in source folders. * @throws SlickException */ public static void init() throws SlickException { loadedImages = new HashMap<>(); try { URI uri = new URI(ResourceLoader.getResource("res").toString()); File[] files = new File(uri).listFiles(new FilenameFilter(){ @Override public boolean accept(File dir, String name) { if(name.endsWith(".png")) return true; return false; } }); System.out.println("Naming filenames now."); for(File f:files) { System.out.println(f.getName()); FileInputStream fis = new FileInputStream(f); Image image = new Image(fis, f.getName(), false); loadedImages.put(f.getName(), image); } } catch (URISyntaxException | FileNotFoundException e) { System.err.println("UNABLE TO LOAD IMAGES FROM RES FOLDER!"); e.printStackTrace(); } font = new AngelCodeFont("res/bitmapfont.fnt",Art.get("bitmapfont.png")); } Now the obvious problem is the line URI uri = new URI(ResourceLoader.getResource("res").toString()); If I pack the res folder into the .jar there will not be a res folder on the filesystem. How can I iterate through all the images in the compiled .jar itself, or what is a better system to automatically load all images?

  Read the article

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• What are the hard and fast rules for Cache Control?

  - by Metalshark

  Confession: sites I maintain have different rules for Cache Control mostly based on the default configuration of the server followed up with recommendations from the Page Speed & Y-Slow Firefox plug-ins and the Network Resources view in Google's Speed Tracer. Cache-Control is set to private/public depending on what they say to do, ETag's/Last-Modified headers are only tinkered with if Y-Slow suggests there is something wrong and Vary-Accept-Encoding seems necessary when manually gziping files for Amazon CloudFront. When reading through the material on the different options and what they do there seems to be conflicting information, rules for broken proxies and cargo cult configurations. Any of the official information provided by the analysis tools mentioned above is quite inaccessible as it deals with each topic individually instead of as a unified strategy (so there is no cross-referencing of techniques). For example, it seems to make no sense that the speed analysis tools rate a site with ETag's the same as a site without them if they are meant to help with caching. What are the hard and fast rules for a platform agnostic Cache Control strategy? EDIT: A link through Jeff Atwood's article explains Caching in superb depth. For the record though here are the hard and fast rules: If the file is Compressed using GZIP, etc - use "cache-control: private" as a proxy may return the compressed version to a client that does not support it (the browser cache will hold files marked this way though). Also remember to include a "Vary: Accept-Encoding" to say that it is compressible. Use Last-Modified in conjunction with ETag - belt and braces usage provides both validators, whilst ETag is based on file contents instead of modification time alone, using both covers all bases. NOTE: AOL's PageTest has a carte blanche approach against ETags for some reason. If you are using Apache on more than one server to host the same content then remove the implicitly declared inode from ETags by excluding it from the FileETag directive (i.e. "FileETag MTime Size") unless you are genuinely using the same live filesystem. Use "cache-control: public" wherever you can - this means that proxy servers (and the browser cache) will return your content even if the rest of the page needs HTTP authentication, etc.

  Read the article

• mount ext4 formated external drive->the drives green light won't stop flashing

  - by Gohlool

  I've installed kubuntu (after 10 years I am trying to play with linux) and manged to attach a external 1TB HDD drive over USB! The drive was formatted with NTFS and everything was working OK. I also changed the /etc/fstab here is my ntfs mount setting: /dev/sdb1 /media/samsung nts-3g auto,user,uid=1000,gid=1000,fmask=000,utf-8 0, 0 Now, I've reparationed the drive and formated it with ext4 filesystem! change my fstb like: /dev/sdb1 /media/samsung ext4 defaults,noatime 0, 0 now, when I plug my dive/or call sudo mount -a, my external drive's green light starts to flash and won't stop, but mount works .... What is the Problem? is this because of ext4? because with NTFS this won't happen! btw. after changing the owner of the /media/samsung and setting permissions 777, I can also access my drive like creating new folder atc. (although is's flashing constantly)! What is my mistake? btw. can you please let me know how to set the owner and the permissions for my /media/samsung directory in fstab for ext4 like I did it for NTFS? Thanks in advance

  Read the article

• How can i install ubuntu on my ntfs hdd without formatting?

  - by Ridvan Coban

  My hdd is just one partition in ntfs (500gb) and 430 gb is used by my photos/movies/music etc which i never will want to lose. Actually i installed ubuntu on a usb flash drive (using it right now) but it is too slow that way. But my problem is : My computer is damaged ( maybe chipset or but not sure) and none of the windows versions (xp,vista,7) works on my pc. I get blue screen error as soon as windows startup logo shows. But ubuntu just works flawless. That means i cannot use wubi. I wanted to shrink my hdd without losing data (which can be done in windows) but found nothing about that on ubuntu forums. Is this possible? Or install ubuntu on my ntfs filesystem? Note : I don't have chance to backup 400 gbs of data. Sorry for my question if it's written a bit compex. I hope you get the point and someone has an idea ;)

  Read the article

• UDF Partition reported full when it is not

  - by Capt.Nemo

  I was using these instructions to setup an external hard disk with udf. I have been able to setup a multi-partition system using those instructions, but I seem to have hit a wall, where the partition is reported as full while writing to the disk. Every other tool available to me reports it as free. Relevant lshw output Here's a screenshot showing the disk: Both the output of df and the file manager (caja) report the disk as free. Filesystem Size Used Avail Use% Mounted on /dev/sda9 9.0G 7.6G 910M 90% / udev 974M 12K 974M 1% /dev /dev/sda1 50G 47G 295M 100% /media/Data /dev/sda6 49G 41G 5.9G 88% /home /dev/sda2 155G 127G 29G 82% /media/Entertainment /dev/sda8 14G 13G 516M 96% /media/Stuff /dev/sdb2 120G 1.9G 112G 2% /media/3c887659-5676-4946-875b-b797be508ce7 /dev/sdb3 11G 2.6G 7.7G 25% /media/108b0a1d-fd1a-4f38-b1c6-4ad1a20e34a3 /dev/sdb1 802G 34G 768G 5% /media/disk I seem to have hit a wall near the 35GB mark. Despite being shown as 35gb/860gb used everywhere, the following happens on a write attempt: [2017][/media/Dory]$ echo D>>echo bash: echo: write error: No space left on device Writing byte by byte, the maximum I can take it to is 34719248K. The most weird part is that on mounting it Windows, Windows can write to the disk easily, and the writes are being read fine back in Ubuntu. However, the used-bytes remains at 34719248K in Ubuntu (It goes higher on Windows, however).

  Read the article

• Implementing a ILogger interface to log data

  - by Jon

  I have a need to write data to file in one of my classes. Obviously I will pass an interface into my class to decouple it. I was thinking this interface will be used for testing and also in other projects. This is my interface: //This could be used by filesystem, webservice public interface ILogger { List<string> PreviousLogRecords {get;set;} void Log(string Data); } public interface IFileLogger : ILogger { string FilePath; bool ValidFileName; } public class MyClassUnderTest { public MyClassUnderTest(IFileLogger logger) {....} } [Test] public void TestLogger() { var mock = new Mock<IFileLogger>(); mock.Setup(x => x.Log(Is.Any<string>).AddsDataToList()); //Is this possible?? var myClass = new MyClassUnderTest(mock.Object); myClass.DoSomethingThatWillSplitThisAndLog3Times("1,2,3"); Assert.AreEqual(3,mock.PreviousLogRecords.Count); } This won't work I don't believe as nothing is storing the items so is this possible using Moq and also what do you think of the design of the interface?

  Read the article

• Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

  - by Jeff Atwood

  I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

  Read the article

• Hibernation to a swap file 12.04, fragfile output

  - by MrHug10

  I've been trying for some time now, to get hibernation working in Ubuntu 12.04 on my Dell XPS17. I dualboot Windows 7 and Ubuntu, each having their own partition and one shared partition for all my data and documents. As I would like to be able to swtich from ubuntu to windows without losing all the things I was currently doing in Ubuntu, I would like to be able to use hibernation. In order to achieve this I've followed the information at http://ubuntuforums.org/showthread.php?t=1042946. Only instead of creating my swap file on my linux partition (which is formatted: ext4), I've chosen to create one on my shared partition (which is formatted: ntfs). There is a problem with this though (at least, that's what I think the problem is), because when I call: sudo filefrag -v /media/data/Ubuntu_Swap_Space/6GiB.swap, I get the following output: Filesystem type is: 65735546 File size of /media/Data/Ubuntu_Swap_Space/6GiB.swap is 6442450944 (1572864 blocks, blocksize 4096) Discontinuity: Block 22 is at 25829097 (was 232498) /media/Data/Ubuntu_Swap_Space/6GiB.swap: 2 extents found So I'm not sure what I need to fill in as an offset to follow the rest of the earlier mentioned information. I've tried both the location of block 22 and the number that is listed after that, but when I then try sudo pm-hibernate nothing happens and this shows up in my /var/log/pm-suspend.log s2disk: Could not use the resume device (try swapon -a). Reason: No such device Hope someone can help me out with this! If you need more information about anything, please let me know!

  Read the article

• Why is LSHW Only listing one of my two HDDs?

  - by Mark

  I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

  Read the article

• How do I understand the partition table? (I want to start over.)

  - by Sammy Black

  I have Ubuntu 10.04 Lucid installed through wubi on my laptop (it came with Windows 7 preinstalled). This was my first foray into Linux, and I'm here to stay. I have no use for Windows, and yet I must manually choose not to boot into it! Should I shrink the Windows partition to something negligible and grow the Linux one using something like gparted or fdisk, and just be content that everything runs? In that case, I need to understand the filesystems. Which is which? Here's the output of $ df -h: Filesystem Size Used Avail Use% Mounted on /dev/loop0 17G 11G 4.5G 71% / none 1.8G 300K 1.8G 1% /dev none 1.8G 376K 1.8G 1% /dev/shm none 1.8G 316K 1.8G 1% /var/run none 1.8G 0 1.8G 0% /var/lock none 1.8G 0 1.8G 0% /lib/init/rw /dev/sda3 290G 50G 240G 18% /host I would prefer to start over with a clean install of 10.10 Maverick, but I fear what I may lose. Certainly, I will backup my home directory tree (gzip?), but what about various pieces of software that I've acquired from the repositories? Can I keep a record of them? By the way, I asked a similar question over on Ubuntu forums.

  Read the article

• Not enough disk space '/' in AWS instance

  - by Sumant

  i am running Ubuntu 11.04 instance for my Web Server on AWS cloud, now i am getting there is no disk space in / partition of my server. df -ah say this Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 7.8G 97M 99% / proc 0 0 0 - /proc none 0 0 0 - /sys fusectl 0 0 0 - /sys/fs/fuse/connections none 0 0 0 - /sys/kernel/debug none 0 0 0 - /sys/kernel/security none 3.7G 112K 3.7G 1% /dev none 0 0 0 - /dev/pts none 3.7G 0 3.7G 0% /dev/shm none 3.7G 80K 3.7G 1% /var/run none 3.7G 0 3.7G 0% /var/lock /dev/xvdb 414G 16G 377G 4% /mnt Now i have Tried these thing for getting some extra space on / partition Clean up All Log files for Apache. Removed all unnecessary files from server. Home directory Cleanup. But Still I am not getting enough space. This Instance type is m1.large with 8GB EBS. Now i am getting i have enough disk space in /dev/xvdb. Is there a way i can allocate some diskspace to / from /dev/xvdb or Any other Ways. Please suggest me the possible solution for this.Is it possible to use the same /dev/xvdb partition with another instance.

  Read the article

• mount issue in ubuntu 12.10

  - by Vipin Ms

  I'm having issue with latest Ubuntu 12.10. Let me make it more clear. I'm having the following partitions in my Laptop. Device Boot Start End Blocks Id System /dev/sda1 2048 39997439 19997696 83 Linux /dev/sda2 * 40001850 81947564 20972857+ 83 Linux /dev/sda3 81947565 123877214 20964825 83 Linux /dev/sda4 123887614 976773119 426442753 5 Extended /dev/sda5 123887616 333602815 104857600 83 Linux /dev/sda6 333604864 543320063 104857600 83 Linux /dev/sda7 543322112 753037311 104857600 83 Linux /dev/sda8 753039360 976773119 111866880 83 Linux I have also two users named "ms" and abc. Here ms is for administrative tasks and abc for my friends. When I mount any drive under "abc" user, I cannot access it under my other user "ms". Same as in the case with "ms" user. I found possible reason behind the issue. When I mount any drive under "abc" user, Ubuntu will try to mount it under "/media/abc/volume_name" instead of "/media/volume_name" . Same as in the case with "ms" user. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 19G 11G 7.5G 59% / udev 1.5G 4.0K 1.5G 1% /dev tmpfs 599M 896K 598M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.5G 620K 1.5G 1% /run/shm none 100M 92K 100M 1% /run/user /dev/sda2 20G 172M 19G 1% /media/abc/TEST /dev/sdb1 466G 353G 114G 76% /media/abc/F088F74288F7063E /dev/sdb2 466G 318G 148G 69% /media/abc/New Volume /dev/sda5 99G 94G 323M 100% /media/abc/Songs /dev/sda6 99G 31G 63G 34% /media/ms/Films Here, you can see that "TEST" was mounted under "/media/abc/TEST". When I try to access the already mounted partition named '/media/abc/TEST" in my "ms" session I'm getting the following error. How to fix this error? Is it a bug? Is there any way to fix this without modifying the underlying file-system structure?

  Read the article

• Dual Boot menu with Ubuntu and Windows 8 not showing up

  - by user180630

  I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

  Read the article

• Retexturing a model via API on the web

  - by AndyMcKenna

  I'm looking at creating a site where a user could see our product and configure the options or look of it and see an image that represents that. The way I'm doing it now is if you have Piece A selected and then you choose Texture X, I have an image on the filesystem that is A with X applied to it. I just swap out my default image with that specific one. One product has 8 areas, with 10-70 pieces per area, and about 200 textures for each piece. Programming the site was pretty simple but we are getting bogged down in rendering all these pieces/textures and entering them into the system. What I would love to do is build a model and have some way to apply the textures via API and render it to the browser. I would even settle for exporting a flat image and pulling that into the browser. Is that possible with something like SolidWorks, 3DSMax, or something else? If the rendering is too time intensive it would still help to batch create all my images and use them the way I am currently.

  Read the article

• USB flash module giving errors

  - by vshenoy

  Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

  Read the article

• I just recursively chmod'd everything under / to 750. Any tips?

  - by Ouairz

  I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

  Read the article

• Install Ubuntu on Asus Eee-PC 1005PE - Dealing with special partitions

  - by MestreLion

  I have an Asus EeePC 1005PE netbook and im planning on doing a massive re-partitioning (going to install Ubuntu, Mint, XP, etc) Ive noticed it has 2 "special" partitions: a 10Gb Fat32 RESTORE hidden partition (used by BIOS "F9 recovery" feature) and a 16Mb "unknown" partition at the end of the drive (used by BIOS "Boot Booster" feature). So, for both partitions, my question is: Can I move/resize the recovery partition freely? What are the requirements for it? (i mean, for it still be found by BIOS when i press F9/Activate BootBooster?). Partition table order? Partition type? Flags? Label? UUID? Can i make it a Logical (instead of primary) partition? Does it must be the flagged as boot? And, more importantly: where can i find any official documentation about it? Ive ready many (mis)information about it... some say Boot Booster partition must be last (in partition table), some say Recovery must be 2nd, that it must be bootable, etc. How can I know what is really needed for the BIOS to use both F9 and Boot Booster? Note: Im using gParted from a Live USB Stick (Mint 10 / Ubuntu 10.10), and ive noticed that, since the filesystem type of the Boot Booster is not recongnized, it cant move or resize it. Can I delete it and re-create it somewhere else? Whenever i create a 0xEF partition gParted crashes and quits and i cannot open it again (must delete the partition using fdisk / cfdisk)

  Read the article

• Restoring backup with Deja Dup from external HD

  - by widgg

  So, here's the problem that I have with restoring. First, I backed up like everything. So I had place on the external HD for only one copy. I had to reinstall everything, but I didn't worry because I had a backup. But now, restoring doesn't work and it starts to be annoying. So, I right click "Restore missing files...". Then I have the popup window from Deja Dup asking where is the backup. So, I select the external HD and either put nothing in "folder" or just put ".". Thinking that it should be the base to look for backups. In both cases, after a while scanning, I get: The Volume "Filesystem root" has only 139.7mb disk space remaining. But my partition "/home" has 799.6Gb free. Also, I just want to restore some files, I don't need all of them. On my external HD, there's a file called: duplicity-full.20120514T220834Z.manifest. A text file. In it, I can see that everything is partitions in files of 52mb. So, small files are in one archive while very large files are split in multiple one. But I can see the exact list of file that I have. So, I'm guessing that my backup is intact. What am I doing wrong ? Is possible that it failes, even to list all the files, because I don't have enough space left on my ExtHD ? Why can't duplicity used another location to do that ?

  Read the article

• Ubuntu 14.04 stalling. Problem with LightDM. Plymouth (and logging out) switches over to a black screen w/ white cursor

  - by Kage

  if its a duplicate, sorry. Couldn't find anything that fits my issue, much less that was on 14.04. I changed a few things recently. Switched to the Numix theme (from PPA), installed lm-sensors and psensor (ran all the I/O probes), Ubuntu Tweak, Pinta, and well, Team Fortress 2 on Steam. :P The system will get to the Plymouth 'ubuntu' screen, load load, all dots filled, switches over to LightDM, but wait! No LightDM. :I Just a blank screen with that white cursor. Can't switch out to tty1-6 - not sure if the Ctrl-Alt-F1 is disabled in 14.04 or if its literally just locked down. If I change any files, I have access to the filesystem from my Windows 8 partition. That's it. :/ I'm pretty familiar with Linux, especially Ubuntu, but I think I'm still at the point I know just enough to break things and not always how to fix 'em. Any help would be greatly appreciated. Thanks! UPDATE I was just able to get into my desktop briefly. I booted Ubuntu. When the black screen froze, I hit Ctrl-Alt-Del. When it started switching off, I hit Ctrl-Alt-Backspace. It rebooted. I plugged the second monitor in I had been using before the issue ever came about. Plymouth displayed on both. LightDM came up, displayed on both (it used to show only the ubuntu logo on the unfocused monitor though). I logged in just fine. Even ran some pending software updates. I logged out of the desktop though, and LightDM refused to show again. xP

  Read the article

• not being able to access any sudo function on my pc

  - by explorex

  Hi, I am not being to access any functions in my desktop and I don't have an OS besides Ubuntu 10.04 Lucid Linux and I am new to ubuntu. I think I rebooted my computer thinking that Google Chrome crashed. I opened Google Chrome but it showed opening message but never opened so I restarted my computer. and when my system was loading ('i was playing with keyboard dont know what I typed') and when by ubutnu loaded, I was unable to access anything some of characteristics are listed below I cannot hear any sound I cannot access wired ethernet connection on the right corner where I usually enable to access interne and I have no internet. There is no local apache server either. when ever I try to start apacer I get setuid must be root or something. When I type sudo then I get message setuid must be root. I cannot access orther external storage devices like pendrive and portable hard drive and cannot mount my other drives with FAT32 filesystem. When I try to start my apache webserver with out typing sudo then I get message cannnot open socket or something like it. EDIT:: i remember also doing command chown -R www-data / earlier and got error message EDIT:: and i cannot shutdown my computer, it only logs off

  Read the article

• Designing communications for extensibility

  - by Thomas S.

  I am working on the design stages of an application that will a) collect data from various sources (in my case that's scientific data from serial ports), keeping track of the age of the data, b) generate real-time statistics (e.g. running averages) c) display, record, and otherwise handle the data (and statistics). I anticipate that I will be adding both data producers and consumers over time, and would like to design this application abstractly so that I will be able to trivially add functionality with a small amount of interface code. What I'm stumbling on is deciding what communication infrastructure I should use to handle the interfaces. In particular, how should I make the processed data and statistics available to multiple consumers? Some things I've considered: Writing to several named pipes (variable number). Each consumer reads from one of them. Using FUSE to make a userspace filesystem where a read() returns the latest line of data even if another process has already read it. Making a TCP server, and having consumers connect and request data individually. Simply writing the consumers as part of the same program that aggregates the data. So I would like to hear your all's advice on deciding how to interface these functions in the best way to keep them separate and allow room for extenstions.

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >