Search Results

Search found 35038 results on 1402 pages for 'rich internet applications'.

Page 135/1402 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • wireless problem: Internet slow connection or limited connectivity

    - by jack
    Hi I have no idea on this problem. My wireless connection doesn't work sometimes. I find it's due to my XP and I have no problem with my Win 7 machine. The problem is - Internet Connection a bit slower than usual Limit connectivity issue I use netsh reset for resetting network configurations but it helps sometimes or not help at all. Any ideas? Thank you.

    Read the article

  • Securing ColdFusion for internet facing server

    - by Goyuix
    What do I need to do to tighten down a ColdFusion server for internet facing apps? The only thing that specifically came to mind was to restrict the CFIDE and JRunScripts directories to a local subnet. Are there settings in the administrator I can tweak to make the applications more secure?

    Read the article

  • Connect Outlook to our Exchange Server 2003 over the Internet

    - by Sharon Cook
    We have a one mail server here on site running Exchange 2003, however we are part of a large exchange group - there are some 10 outlook mail servers around the world and we are just one of the administratove groups. We can access email via OWA and I have checked our server and is a RPC-HTTP Back end server and RPC is installed. We can connect via VPN, on lan, and OWA but I cannot get it to work via the internet. Any suggestions

    Read the article

  • Windows Internet Explorer 8 Dynamic Installer category in WSUS

    - by SuperFurryToad
    I'm new to WSUS and I'm in the process of setting up a WSUS server. I'm wondering what is meant by the "Windows Internet Explorer 7/8 Dynamic Installer" category under "Under Products And Classifications"? Will this allow me to push out updates for IE 7/8 or will it also push out upgrades from IE6 or IE7 to IE7 or IE8. We're running IE7 at the moment, and want to avoid upgrading to IE8 at this point in time.

    Read the article

  • isa 2004 - banned site rule cause slow internet

    - by Holian
    Hi Gods, We have windows server 2003 with isa 2004. Our clients uses internet with proxy. We have two isa rule: order name action protocolls from/listener to condition 1. trafic ALLOW all outbound all networks all networks all users 2. FTP ALLOW FTP Server EXTERNAL/INTERNAL/Local host 10.1.1.1 So we have to "bann" a few webpage (like facebook, youtube...etc...), so we make a new rule 0. banned DENY HTTP internal denied pages all users In the denied pages we have the *.facebook.com domain set. After we enable this rule, the entire internet slows down. The banning rule works well, redirect to an internal site, but the other sites.... If i open a page..it normally takes 3-10 sec to load, but after this rule this time is: 2-4 minutes. In the monitor / logging menu we got a few FAILED CONNECTION ATTEMPT like: Log type: Web Proxy (Forward) Status: 304 Not Modified Rule: All local traffic Source: Internal ( 10.1.1.1:0 ) Destination: External ( 172.24.28.22:3128 ) Request: GET http://www.konyvelozona.hu/wp-content/uploads/nyugdijas-holgy-2.jpg Filter information: Req ID: 17270b72 Protocol: http User: anonymous Additional information Client agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.3072... Object source: Verified Cache Processing time: 9047 Cache info: 0x18801002 MIME type: - In the event log we got a few log: Description: The Web Proxy filter failed to bind its socket to 10.1.1.1 port 80. This may have been caused by another service that is already using the same port or by a network adapter that is not functional. To resolve this issue, restart the Microsoft Firewall service. The error code specified in the data area of the event properties indicates the cause of the failure. The failure is due to error: 0x8007271d The Web Proxy filter failed to bind its socket to 127.0.0.1 port 80. This may have been caused by another service that is already using the same port or by a network adapter that is not functional. To resolve this issue, restart the Microsoft Firewall service. The error code specified in the data area of the event properties indicates the cause of the failure. The failure is due to error: 0x8007271d If i tpye: netstat -o -n -a | findstr 0.0:80 then i got, tcp 0.0.0.0:80 0.0.0.0:0 LISTEN 4 udp 0.0.0.0:8031 *.* 2780 udp 0.0.0.0:8082 *.* 2780 Some month ago we installed XMAP, but now we only use mysql. Apache service stopped. In the Xamp port check menu i see: Service POrt Status Apache (http) 80 Process: System Maybee this is the problem? I dont know what should i do now... Thank you folks.

    Read the article

  • Deployment/provisioning tool for commercial applications (not developed in-house)

    - by mfinni
    I help manage a few hosted commercial applications, and we have a lot of manual processes involved when doing new customer-instance deployments into the shared (multitenant) environment. Allow me to describe the most relevant features, and then we can talk about the tools. We have an application on AIX, that requires dozens of changes to config files (some plain text, some XML) as well as a good number of commands to be run on multiple servers - some to start the new instance, some to restart our shared authentication and reporting engines, etc. The config changes follow templates, of course. The servers in question will also depend on the initial conditions specified by the implementer/deployer - we may choose to deploy a given customer to our servers in Europe, or one set of servers may be active-active whereas a different set of servers is active-passive - in short, there's a lot of complications. We have another application that run on IIS 6 and SQL. The DBAs don't want any automation of the SQL components and that's fine with me, but automating the IIS bit would be great. For a new customer instance, we make a filesystem copy of a template Virtual Directory target named after the new customer, make a new AppPool to match, edit a VirDir template .xml file to replace the filepaths and AppPool names with the new ones, and then make a new VirDir from the modified template XML to point to the new filesystem folder and app pool. For the first case, something like ControlTier or Chef might be good. For the second, the new(ish) Web Deploy from MS would probably do a good job. Has anyone used these tools or others to do something similar for applications? More of a nice-to-have, not a fixed requirement - Has anyone used anything that works on both platforms? I'm looking for something free, because the official word is that within a year, we will have whatever HP has renamed the OpsWare suite, which should be able to do stuff like this. Edit - based on someone's suggestion, looking at CFengine for the AIX application, it doesn't seem to address my pain. The problem isn't keeping a given config synced across dozens of servers, we have rsync for that. The problem is that onboarding a new customer instance touches dozens of files, putting pieces of the same or similar information into them - some are new stanzas in existing files, some are new files, and some are new directories. This is a several-hours-long process that is also error-prone because it's mostly done by hand. I guess I'm looking for config-file generation and management. I have built a small Perl script to do something similar for a much smaller case - it binds a CSV file into variables, and then does a copy-and-search-and-replace from a set of template config files. I could probably do the same here.

    Read the article

  • Peer to Peer solution for LAN over Internet

    - by Coyote
    I need to emulate a LAN between some machines over the internet to play some LAN only games. I remember that there was software that could do this, but don't remember what it was called. Anyone heard of this, or know of similar solutions that won't require a lot of work? The game is fun, but not fun enough to bother with setting up a VPN server. ;-)

    Read the article

  • Removing phantom applications from Application Pools in IIS7

    - by Col
    I have an application in one of my application pools that has a virtual path of '/Site/login.aspx'. I want to remove it but it no longer exists on my computer and it's causing me issues setting up AppFabric. I understand that you can remove these phantom applications by recreating the application in IIS and then hitting Remove. That will get rid of the application from the pool but in this case I can't recreate the application due to the /login.aspx in the virtual path Any ideas how I remove this erroneous entry? Thanks

    Read the article

  • JavaScript-based applications and text browsers

    - by Vi
    How to use complex AJAX applications with a lot of menus and with X.509 authentications in non-GUI mode with simple browsers? For example, I can login to Webmoney from console using links/lynx/link2 (but not w3m), entering captcha (using aaxine) and do operations there, but can't login not using X.509 certificate (even if I try to separate SSL part using "socat tcp-l:... openssl:...:443,cert=extracted_from_firefox.pem") Is there some program that behaves like fully-fledged browser (build DOM/execute JS/Support all features except of actually displaying things), but without GUI and dependencies on GUI libraries?

    Read the article

  • Applications Deployment with MDT

    - by beakersoft
    I have added a install for Silver light to my MDT server, so it can get installed when the image gets deployed. When I boot them machines it is asking me to install the applications, how can i get it to auto install the apps without prompting. I have added this line to the rules - I thought that would but seems to make no difference. I'm sure i must have missed something somewhere? Cheers Luke

    Read the article

  • OpenSwan + xl2tpd VPN: How can I share Internet connection

    - by Michael
    I have an OpenSwan IPSec + L2TP VPN on Linux setup working from off of my server so I can connect to it from my laptop (roadwarrior setup). I am able to connect to the VPN remotely just fine, however the internet connection is not shared. I'm assuming there is some sort of masquerading I am supposed to be doing, but I have no idea how to go about doing that (iptables?). Any help getting this working so I can essentially use my VPN connection as a proxy would be great. Thanks

    Read the article

  • Windows 7 & Virtual PC and Internet (gateway) problems on host PC

    - by Mufasa
    I upgraded to Windows 7 on a PC that is a few years old. The CPU was one revision away from having Hyper-V on it. So, I had to install Microsoft Virtual PC 2007 (v6.0.156.0) to run full XP instances instead of the seamless XP virtualization that is advertised so much. That's fine though; the 'older' version is useful since I use it to run different versions of the whole XP/IE stack for testing. (I'm a web developer.) ...And for the one 16-bit application we still use at the office for scheduling. * sigh * The virtual instances work fine, including networking. My issue is that after a reboot or coming out of sleep mode, my host Windows 7 won't connect to the Internet. It will connect to the local network fine. If I disable the "Virtual Machine Network Services" item (I'll call "VMNS" from here on) in the LAN Connection properties box, it starts working. But than the Virtual PC instances lose their network connectivity. If I re-enable VMNS again in the same instance, everything works (Internet on host and in the virtualized instances). But after the next reboot/sleep cycle this starts over. The route table gave me a clue though. When doing a cycle w/ VMNS enabled: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.3.51 20 0.0.0.0 0.0.0.0 10.0.10.10 10.0.3.51 276 ... After VMNS is disabled, the first route goes away. I assume that is for VMNS to intercept virtualized instance's network connections and forward them correctly? Just a guess though. More info: I checked my Firewall settings and Services (because I'm sort of a control nazi and turn off a lot) but couldn't find anything that made sense and if turned on changed anything. So it might be something there I'm missing, but I don't know what. My current hacked solution: So, I figured I'd mess with the routes myself to see if that helped, it did. If I run a route delete 0.0.0.0 on the universal (0.0.0.0) gateway routes, and add back in just the 2nd line with route add 0.0.0.0 mask 0.0.0.0 10.0.10.10--the one that points to my actual gateway (10.0.10.10)--then I don't have to mess with the disable/enable cycle of VMNS, and everything works. Running those two commands is faster then bringing up connection options and disabling and re-enabling VMNS, but I still don't want to have use that hack script every boot either. (Oh, and I also tried messing with hard-coding TCP/IP settings in my network adapter, including setting high metrics, etc., but that didn't help either.) Any suggestions on the right way to fix this?

    Read the article

  • Renicing complex multithreaded applications in Linux

    - by Vi
    Applications (especially big Java and C++ ones) often shows up as multiple lines in htop, each have separate PID and separate nice level. Also application can spawn a lot of child processes (like as in aptitude update), so I need to affect both parent one (to make new children have new priority) and child ones (to bring the effect immediately, not after the child terminates) How can I apply "renice" or "ionice" or "schedtool" to already launched big application?

    Read the article

  • change internet hotkey

    - by Matt
    My laptop (Acer Aspire 6930) has a hotkey to open the web browser. However, I just got Firefox and I was wondering how I can change the hotkey so that it opens Firefox instead of Internet Explorer. I already contacted Acer...they told me to phone them (at cost), which I would rather avoid since it's such a trivial matter.

    Read the article

  • Security Restrictions Downloading From the Internet

    - by Cyper
    Hi, For some reason since we rolled out IE7 to the estate users are unable to download from the Internet, they get an error message "the operation could not be completed due to restrictions on the computer" I have checked the GPO and it allows downloads in the Default domain policy. I am I missing something in GPO or is this problem with IE7. Any help would be much appreciated. Cheers

    Read the article

  • All internet requests in Windows time out

    - by Brandon
    So, I've run into a very strange problem with my home wireless network. Previously, at seemingly random times, the router seemed to disconnect all wireless hosts and cause all of the wired hosts to have a "limited connection" according to windows. In order to fix this, I had to unplug all of the wired hosts from the router, unplug the modem from the router, and power cycle the router. This seemed to solve the problem for a while until the exact same thing happened a day later and I had to go through the same process again. That's where I noticed something weird happening. There was one wireless host (a Windows Vista laptop) that seemed to be causing the router to disconnect the other hosts whenever it connected. When this happened, only that laptop was able to use the wireless from the router. When this happened, I disconnected it from the wireless (by disabling the wireless adapter) then reconnected it (by re-enabling it) and now it, like the other hosts, couldn't connect. I've never really seen anything this strange happen on our network before. So, I restored the router to factory settings and the problem seems to have vanished except one crucial problem. There's another host (a Windows 7 laptop) that was perfectly able to connect before all of the router issues and even in between the crashing and power-cycling events but now says its connected and says it's able to reach the Internet, but all requests time out. In any browser I've tried, the tab says connecting to [site]... for a solid minute and then tells me the request timed out. When I try to ping google.com in cmd it also says request timed out. In frustration, I booted into a dual-boot Ubuntu installation on the Windows 7 host and the connection works fine, to my surprise, as ubuntu is where I am now typing this rather long question. I haven't looked through the event log in windows but will post anything I find in an edit I haven't tried connecting (in Windows 7) to any other wireless network, since The fact that it works in Ubuntu suggests its Windows and not the router but I didn't change any wireless settings in windows before it being able to reach the Internet and not. Does anyone have any clue what could have happened. I opened to buying another router as this one is almost a year old :) but I would like to know whats going on here. Thanks in Advance! P.S. Sorry for how long my question is, I'm a little anxious (:

    Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >