Search Results

Search found 59257 results on 2371 pages for 'windows identity'.

Page 135/2371 | < Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >

• Sound not playing on Windows XP - SoundEffect or Song: Monogame

  - by ashes999

  I'm trying to integrate sound into my Monogame game. I don't have the content pipeline hack -- just straight Monogame (Beta 3) at this point. (I tried adding the content pipeline, but ran into some issues.) I added a .wav file to my /Content directory, and I can create and instantiate both SoundEffect and Song classes. However, both show durations of 00:00:00 (on a ten-second long file), and neither plays. I can call LoadContent without any issue. But when I call Play, nothing plays. I've tried a couple of different sounds, and different formats (MP3 and WAV) to rule that out. Only WAV seems to even load without crashing out, but it doesn't play. There seems to be a GitHub issue that fixes this problem in 2.5.1. Downgrading to 2.5.1 doesn't fix this problem; it seems like it's fixed in 3.0 (_data is set in the SoundEffect instance). This issue only occurs on Windows XP. I tested it on a Windows 7 laptop, and the sound plays fine.

  Read the article

• Server 2008R2 in Extra Small Windows Azure Instance?

  - by Shawn Eary

  Windows Azure hosting for an Extra Small (XS) Windows VM seems to come out to be about $10 a month right now. I think this XS instance gives you the equivalent of a 1 GHZ CPU with 768MB of RAM. I think the minimum requirements for Server 2008 is 1GHZ CPU with 512MB of RAM. Also, I think the minimum requirements for SQL Server Express is 1GHZ CPU with 256 MB of RAM and that the minimum requirements for Team Foundation Server Express 11 Beta is 2.2 GHZ CPU with 1 Gig of RAM (this 2.2 GHZ part could be a problem for my 1 GHZ XS VM...). Given the performance of the XS Azure instance, would I be able to install: a very basic MVC web site; a free instance of SQL Server Express; a free single user instance of Team Foundation Server Express 11 Beta and run the XS VM instance without serious crashing? I know there are other Shared WebHost providers that can provide these features for me, but those hosting providers have the following disadvantages: They sometimes cost a lot of money after all of the "addons" are in place They probably don't provide the level of security and employee integrity that Microsoft can provide They don't provide the total control that an Azure VM seems to provide

  Read the article

• How to Print From Metro Apps in Windows 8

  - by Taylor Gibb

  Printing has become an application aware feature in Metro applications. This makes the outcome of a print job different from application to application, but the question remains, how do you print? Using the Keyboard Not all apps support printing in Windows 8, a good example of one that does is Mail. So fire up the default Mail app select an email you want to print. When you are ready, go ahead and press the ctrl + P keyboard combination. This will bring up a list of available print devices on the right-hand side, you can use the up and down arrows to select a printer. You will get most of the options you are use to when printing, so once you have set up your preferences go ahead and hit the print button. Using the Mouse If you would rather use your mouse, move it to the bottom right hand corner of your screen, which will bring up the Charms bar, from here you will need to click on the devices charm. Using this will list your printers as well as other devices, so make sure you select a printer. That’s all there is to it. How To Switch Webmail Providers Without Losing All Your Email How To Force Windows Applications to Use a Specific CPU HTG Explains: Is UPnP a Security Risk?

  Read the article

• Dual Boot menu with Ubuntu and Windows 8 not showing up

  - by user180630

  I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

  Read the article

• Display Problems running Ubuntu 12.04 in Windows VMware Player

  - by Alex Reynolds

  I am posting this again because I have changed to VMWare Player and I discovered something new. I am running Ubuntu 12.04 LTS (Guest) in VMWare Player 6.0.2 on Windows 7 64-bit Host. I have VMWare Tools installed properly. I am running MATE but the problem persists when I change (to and from) xfce, gnome, mate a-- and back again I had been using this for a couple of years without any graphics issues. After an Ubuntu update (typical) -- my video is corrupt and will not refresh correctly. My desktop icons are "mirrored" and when I open a terminal window (for instance) -- sometimes -- the window appears multiple times. Of course, only one is the real image. It seems to be a refresh problem. When I move an active window around the screen the "older" images "erase" and my icons (for instance) are in the correct location. For instance, I can move the terminal around a pretty corrupted window and the screen behind it is repainted correctly. NEW: Next, I got the idea to try and Remote Desktop in to the Ubuntu 12.04 LTS Guest OS from my Windows 7 64-bit Host. Once working, and connected via Win RDC -- using MATE as default in my /etc/xrdp/startws.sh -- my video is not corrupted and works fine (as in the past). Any ideas about what is going on ? or how to fix this ?

  Read the article

• Windows Physical Direct Memory Mapping

  - by chrisjleaf

  I'm a bit disappointed there is almost no discussion of this no matter where I look so I guess I'll have to ask. I'm writing a cross platform memory bench marking application which requires direct physical address mapping rather than virtual addressing. EDIT The solution would look something like the Linux/Unix system calls: int fd = open("/dev/mem", O_RDONLY); mmap(NULL, len, PROT_READ, MAP_SHARED, fd, PHYSICAL_ADDRESS_OFFSET); which will require the kernel to either give you a virtual page mapping to the desired physical address or return that it failed. This does require supervisor privileges but that is ok. I have seen a lot of information about shared memory and memory mapped files but all of these reside on disc and are thus not really useful when I'm trying to make a system dependent read. It is very similar to writing an IO driver although I do no need write permissions to the physical address. This site gives an example of how to do it on a driver level using the Windows Driver Kit: NT Insider: Sharing Memory between drivers and applications This solution would probably require Visual Studio which currently I do not have access to. (I have downloaded the WDK api but it complained about my use of GCC for Windows). I'm traditionally a Linux programmer so I'm hoping there might be something really simple I'm missing. Thanks in advance if you know something I don't!

  Read the article

• windows 8 + Ubuntu dual boot

  - by Jack Yuan

  I installed Ubuntu 13.04 on Windows 8. Yes I can access both of them, but the process is kind of long. In BIOS, EFI is for Windows 8, legacy support is for Ubuntu. If I choose EFI first, the startup just go straight to Win8 without offering me a choice. If I choose legacy first, the starup will offer me a choice between win8 and ubuntu. But I can only choose Ubuntu. If i choose win8, there will be a mistake(file missing under configuration). That is to say, every time i wanna switch to another OS, I have to go into BIOS and change the priority settings. I heard something about secure boot might be the cause of this situation. But the thing is that there is not even an option called "secure boot" in my BIOS, which means i cannot disable it. All I want is that an option menu appears everytime i turn on my computer so i can easily choose what OS I want for today. Can anyone help me plz? Thank you very much!!

  Read the article

• Dual Boot Windows 8 and Ubuntu

  - by Nick

  My laptop has two hard drives, one 320GB HDD and a 30GB SSD. I installed Windows 8 on the HDD and Ubuntu on the SSD. However, after I installed Ubuntu, Windows 8 did not appear on the boot list. I tried boot-repair, but this didn't help.Here is the output of my fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd9314a Device Boot Start End Blocks Id System /dev/sda1 * 2048 625139711 312568832 7 HPFS/NTFS/exFAT Disk /dev/sdb: 30.0 GB, 30016659456 bytes 255 heads, 63 sectors/track, 3649 cylinders, total 58626288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd93132 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 207126 102539+ 83 Linux /dev/sdb2 208894 58626047 29208577 5 Extended /dev/sdb5 208896 4112383 1951744 82 Linux swap / Solaris /dev/sdb6 4114432 58626047 27255808 83 Linux Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 49 heads, 48 sectors/track, 3292 cylinders, total 7744512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009c694 Device Boot Start End Blocks Id System /dev/mmcblk0p1 * 8192 7744511 3868160 b W95 FAT32 I also tried sudo grub-update, but that also did nothing.

  Read the article

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• How to improve Windows Server 2008 R2 to handle many connections?

  - by invisal

  It has been a few days so far that I am trying to figure how to solve this problem. First of all, I am running a website with an average daily page view of 350,000. Previously, all ads management (tracking click and impression that each ads has served) and content were served in a single server with the following spec: Server 1 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 8 GB Storage: 2 x 1 TB hard drives Bandwidth: 10 TB per month To improve our website speed, I decided to separate the ads management script to another dedicated server because we have more than 15 advertisers to 30 advertisers per each page. Server 2 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 4 GB Storage: 2 x 300 GB hard drives Bandwidth: 10 TB per month The Problem The problem is that Server 1 can handle both content and ads system. Now, that I take away the ads system and put it at Server 2. Server 2 can barely serve only ads system. Test First of all, I moved 75% of the ads to Server 2. And then, perform a ping to server: ping -t xxxxx. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Reply from xxxxx bytes=32 time=289ms TTL=116 Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=348ms TTL=116 Reply from xxxxx bytes=32 time=284ms TTL=116 Then, I moved 100% of the ads to Server 2. Then, perform a ping to server again. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Request timed out Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Request timed out Request timed out Reply from xxxxx bytes=32 time=284ms TTL=116 Attempts Increase MaxUserPort and TcpNumConnection Restart the server Increase IIS Max Instances and Instance MaxRequests Server Resource Only 10%-15% of the network connection is used Only 10%-15% of the CPU is used Only 25% of the memory is used

  Read the article

• How do you monitor SSD wear in Windows when the drives are presented as 'generic' devices?

  - by MikeyB

  Under Linux, we can monitor SSD wear fairly easily with smartmontools whether the drive is presented as a normal block device or a generic device (which happens when the drive has been hardware RAIDed by certain controllers such as the one on the IBM HS22). How can we do the equivalent under Windows? Does anyone actually use smartmontools? Or are there other packages out there? The problem is that SCSI Generic devices just don't show up in Windows. If the drives aren't RAIDed we can see them fine. How I'd do it in Linux: sles11-live:~ # lsscsi -g [1:0:0:0] disk SMART USB-IBM 8989 /dev/sda /dev/sg0 [2:0:0:0] disk ATA MTFDDAK256MAR-1K MA44 - /dev/sg1 [2:0:1:0] disk ATA MTFDDAK256MAR-1K MA44 - /dev/sg2 [2:1:8:0] disk LSILOGIC Logical Volume 3000 /dev/sdb /dev/sg3 sles11-live:~ # smartctl -l ssd /dev/sg1 smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.32.49-0.3-default] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Device Statistics (GP Log 0x04) Page Offset Size Value Description 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 26~ Percentage Used Endurance Indicator |_ ~ normalized value sles11-live:~ # smartctl -l ssd /dev/sg2 smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.32.49-0.3-default] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Device Statistics (GP Log 0x04) Page Offset Size Value Description 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 3~ Percentage Used Endurance Indicator |_ ~ normalized value

  Read the article

• Server Push / HTTP Streaming on Windows Mobile / Windows CE

  - by afriza

  Hi, I find that HTTP Streaming / Server Push is quite promising for my project. Does someone have any clue on how to implement this in Windows Mobile? .NET / Native / other implementations are welcomed. Preferably with permissive license. some links on HTTP Steaming / Server Push: - Push Technology - Streaming HTTP / Server Push - Cross-browser implementation of “HTTP Streaming” (push) AJAX pattern - XEP-0124: Bidirectional-streams Over Synchronous HTTP (BOSH) I was thinking of using some Qt XMPP library (QXmpp) to do the job, but I'm not sure if it's up for the task and I also want to hear some opinions on this.

  Read the article

• wierd questian this time....about win 3.1x

  - by Erez

  Can any one tell me how many processes were loaded in win 3.1x on startup? (system tasks)... Just couldn't find it anywere..i guess it is too long ago for the internet :-) 10x

  Read the article

• Installing Windows Management Framework 3.0 basically destroyed WMI, how can I fix it without reinstalling the O.S.?

  - by Massimo

  Related, of course, to this question. Before discovering it was somewhat... dangerous, I installed Windows Management Framework 3.0 on a number of Windows Server 2008 R2 SP1 servers, and WMI got completely trashed on all of them. This is what the WMI namespace looks like on a normal server (this is from Server Manager - Configuration - WMI Control): This is what it looks like after installing WMF 3.0: Yeah. Everything except WMF 3.0's new features is gone. Needless to say, nothing seems to work anymore on those servers. And no, this is not due to some strange installation error, this happened on three servers which were perfectly working before installing WMF 3.0, and on all of them the installation completed succesfully. Admittedly, one of them had a somewhat complex setup (various System Center products and SQL Server instances)... but two of them are just plain standard domain controllers which do nothing else at all. How can I fix this mess without having to reinstall the O.S. on these servers? And why did it happen in the first place?

  Read the article

• How is route automatic metric calculated on Windows 7?

  - by e-t172

  KB299540 explains how Windows XP automatically assign metrics to IP routes: The following table outlines the criteria that is used to assign metrics for routes that are bound to network interfaces of various speeds. Greater than 200 Mb: 10 Greater than 20 Mb, and less than or equal to 200 Mb: 20 Greater than 4 Mb, and less than or equal to 20 Mb: 30 Greater than 500 kilobits (Kb), and less than or equal to 4 Mb: 40 Less than or equal to 500 Kb: 50 However, they seem to have changed their algorithm in Windows 7, as my routing table looks like this: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.3 10 0.0.0.0 0.0.0.0 10.202.254.254 10.202.1.2 286 10.202.0.0 255.255.0.0 On-link 10.202.1.2 286 10.202.1.2 255.255.255.255 On-link 10.202.1.2 286 10.202.255.255 255.255.255.255 On-link 10.202.1.2 286 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.3 266 192.168.0.3 255.255.255.255 On-link 192.168.0.3 266 192.168.0.255 255.255.255.255 On-link 192.168.0.3 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.3 266 224.0.0.0 240.0.0.0 On-link 10.202.1.2 286 255.255.255.255 255.255.255.255 On-link 10.202.1.2 40 =========================================================================== The only "correct" metric is the first one (Gigabit connection = 10). However, other routes using the Gigabit connection have metric = 266, my VPN has metric = 286, and loopback is 306 (?!). Any idea what's going on?

  Read the article

• Give access to specific services on Windows 7 Professional machines?

  - by Chad Cook

  We have some machines running Windows 7 Professional at our office. The typical user needs to have access to stop and start a service for a local program they run. These machines have a local web server and database installed and we need to restrict access to certain folders and services related to the web server and database for these users. The setup I have tried so far is to add the typical user as a Power User. I have been able to successfully restrict them from accessing certain folders (as far as I can tell) but now they do not have access to the service needed for starting and stopping the local program. My thought was to give them access to the specific service but I have not had any luck yet. In searching the web for solutions the only results I have found relate to Windows Server 2000 and 2003 and involve creating security templates and databases through the Microsoft Management Console. I am hesitant to try an approach like this as these articles are typically older and I worry this method is outdated. Is there a better way to accomplish the end goal of giving the user permission to run the service and restrict their access to certain folders? If any clarification is needed on the setup or what we are trying to achieve, please let me know. Thanks in advance.

  Read the article

• Looking for suggestions for hosting Windows 2000 Server in the cloud / VPS / etc?

  - by JohnyD

  I have a Windows 2000 Server, currently virtualized in Hyper-V, that I would like to get running off-site as a backup (cloud, VPS, etc). You can't virtualize in EC2 and I'm fairly certain there are no Server 2000 AMI's floating about (correct me if I'm wrong!). If anyone has a recommendation on how I can get a virtualized Windows 2000 Server running in a secure, remote environment I would be grateful. As far as locations go I'd be interested in both North America as well as Australia and Europe. In a nutshell, we're ploughing our way out of a legacy codebase and this server is the last that remains of the legacy apps. However, it is still very much used by our clients. Everything is backed up each night (data, images, etc) to tape which is then taken offsite. However, in the event of a fire I would love to have a backup legacy server to point DNS records to. So while I am rebuilding from the ashes our services would already be available. It would save a lot of time and make my managers all the more happy (and that's what it's all about, riighhtt? :D) Thank you all for your suggestions. Please let me know if I've left out any important information. Additional info: - the legacy codebase does not function properly in Server 2003

  Read the article

• Recent DDE / file open issue with Office 2007 affecting only a few machines, is a Windows Update to blame?

  - by kafka

  All our workstations run Windows 7 Professional 64 bit. It started with one, then another, then another couple of machines having a problem accessing Word files locally and on the network. This doesn't happen on my machine though. Affected users get the error message 'There was a problem sending the command to the program'. I've Googled for solutions, but none of the answers worked. They suggested deleting certain registry keys; unregistering and reregistering the program for DDE; resetting the way that the shell opens .docx programs etc. each to no avail. As it affects local and network shares I believe the problem lies with the clients, and not the server, and I'm starting to suspect that there could have been a recent Windows Update which has caused this. I've tried comparing the updates on my working machine with an affected machine, but I can't immediately see any major differences. Has anyone else recently encountered this problem? What are the best steps to take to further isolate what could be causing this?

  Read the article

• Windows 7 Explorer: how to show total size of all files in current folder?

  - by matt wilkie

  In Windows XP Explorer one can turn on Status Bar which shows, among other things, the total size of all the files in the current folder, or if the cumulative size of the selected files. How do I get the same at-a-glance information in Windows 7? Selecting files doesn't count as it stops after 15 files, and it's rare that I'm concerned about total size with that few files (it's pretty easy to estimate in my head). thanks. UPDATE: Information derived from the context menu (select r-click properties) isn't "at a glance", and not as smooth as selecting files and clicking the details link at the bottom in any case. Thank you for fleshing out more of the available routes though. Yes Q19232 is similar to this one, though it is not a duplicate. That question is about looking for easy free-space on disk stats and this one is easy used-space by contents of this folder stats. The answer for both is the same though. You can't! Hopefully someone will figure how to get this lost feature back with a shell extension or something.

  Read the article

• How to properly reserve identity values for usage in a database?

  - by esac

  We have some code in which we need to maintain our own identity (PK) column in SQL. We have a table in which we bulk insert data, but we add data to related tables before the bulk insert is done, thus we can not use an IDENTITY column and find out the value up front. The current code is selecting the MAX value of the field and incrementing it by 1. Although there is a highly unlikely chance that two instances of our application will be running at the same time, it is still not thread-safe (not to mention that it goes to the database everytime). I am using the ADO.net entity model. How would I go about 'reserving' a range of id's to use, and when that range runs out, grab a new block to use, and guarantee that the same range will not be used.

  Read the article

• Looking for easiest, most simple solution to run a customised DNS Server for my local network on Windows 7.

  - by Jamie G

  I need to forward some websites, such as http://testing.server/ to an fixed IP address on my local network. I can do this easily on one computer using the hosts file. However, I need this to work for all machines on my network. I think the best way to do this will be to setup my own DNS Servers and add the custom DNS settings there. However, I'm looking for the simplest way possible to do this - I really don't want to spend hours setting up Unix Servers and running tricky terminal based scripts just to do this! My server is a standard Windows 7 machine. My dream would be a nice simple windows program with a GUI where I could input my ISP's DNS server and it would use those records, unless I had specifically set up my own DNS for a domain to use instead. If it had a web based admin system that was accessible from another computer on the network that would be even better. Does anyone know of anything that can do this? Many thanks indeed.

  Read the article

• CaptureCameraDialog returns OK but does not save (Motorola ES400)

  - by Dominic

  Ok it seems like everyone in the world has issues with CaptureCameraDialog. In my case the result is OK, but when taking the photo there is a MessageBox that says "Error" that appears and disappears in the blink of an eye, then returns to my app (so I don't have time to actually read the error). It has not saved the file. It does not throw an error to my application. There is also another issue which is exactly the same as the issue talked about here (yet none of the fixes work for me). http://www.pcreview.co.uk/forums/thread-4025602.php Does anyone know how to get the "error message" that the dialogue box displays for an instant?

  Read the article

• How can I disable flashing icons on Windows 7 taskbar?

  - by Jebego

  I set my Windows 7 taskbar to auto-hide. However, sometimes when a program changes or something new happens in a program, the taskbar will show its self, and its respective taskbar icon will begin flashing orange. Here's what I'm talking about: To make the taskbar hide again, I have click on the program before I can go back to what I was doing. Anyways, I personally find this very annoying, and would love to find a way to either: Prevent the taskbar from having such alerts. Prevent the taskbar from showing its self when it has such alerts. I've searched around quite a bit, and really only found answers to this for XP. I've also found another Stack Exchange Question looking for the same thing for Windows 7. However, none of the answers to the question were really what I'm looking for. I'm not looking to hide the taskbar, or control the number of flashes. However, this answer seems to be what I'm looking for, so I downloaded and tried out the program. It works perfectly, other than the fact that the start menu icon is always shown, regardless of the taskbar being set to auto-hide. So, any ideas on how to fix this problem?

  Read the article

• Windows/C++: detect when focus has changed between windows (globally)

  - by twig

  I'm trying to find a way to detect when focus is changed to another window (without having to poll every X ms). I've already figured out a way to detect when focus is switched between applications using WH_SHELL and HSHELL_ACTIVATESHELLWINDOW. The problem is I want to detect when focus is switched between dialog/windows within the same app. ie. In Notepad, I can determine when the app switches to Notepad, but I cannot detect when the "Open" or "Save" dialogs appear because the focus is still within the same application.

  Read the article

• CreateProcessWithLogonW : unable to start process

  - by Vivek

  Hi I am completely new to programming. And please someone help me. I am trying to start a pocess from a service. I need to start the new process by prompting user to enter admin credentials. I was trying to use CreateProcessWithLogonW(). Am I using the right function. I tried to give input username, password, domain as localhost. I gave full pathe to the .exe file that i need to start. Here is the piece of code. CreateProcessWithLogonW(L"Administrator", L"localhost", L"password", 0, NULL, L"c:\myupdates\myapp.exe", NORMAL_PRIORITY_CLASS | CREATE_CONSOLE, NULL, NULL, &si, &pi); Si.cb = sizeof(si); Si.lpDesktop = L"winsta0\\default"; But the process never started. Can you guys tell me what I am doing wrong. And what do I need to do to promt user to enter credentials of administrator instead of hardcoding it.

  Read the article

< Previous Page | 131 132 133 134 135 136 137 138 139 140 141 142  | Next Page >