Search Results

Search found 16871 results on 675 pages for 'computer vision'.

Page 136/675 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• Can't communicate with Primary DNS Server

  - by horsley

  A computer, with Windows 7, can't access any website by domain suddenly. Whether this computer use a wired link or connect to the WLAN, The fault persists IP and DNS obtained automatically, and seems normal (ipconfig /all return the correct info) I can visit websites by using HTTP proxy The DNS server is available, other computer in my room works properly. I can ping myself, the gateway and any other IP, but domains I can use nslookup and obtain the correct IP info There are some error information in the event log about dns client events explaining the client can not verify the DNS server available Windows network diagnosis explain that Windows can't communicate with the device or resource (Primary DNS Server) I guess the dns client should be blame. I tried to do the following things but the fault persist. Reinstall the driver of network adapter Reset TCP/IP (netsh int ip reset) Reset Winsock (netsh winsock reset) Reset LSP I don't want to reinstall the whole os, what should I do?

  Read the article

• Sharing a printer over the net from Windows 7 to Windows Server 2003

  - by Grant Unwin

  Hi, I need to share a printer that is connected to a Windows 7 computer. The windows 7 computer is in another building about an hours drive away. The computer that needs to access the printer is running Windows Server 2008. Ive tried setting the printer as 'shared' for 'everyone' on the Windows 7 PC and accessing it from the server by adding a TCP/IP port to the IP address but the printer just wont add. From googling aparently it may need setting up as a printer server through IIS, but i'm just not sure on the best practice. Any help greatly appreciated. Thanks Grant Unwin

  Read the article

• Sharing Windows Store apps between accounts

  - by Klas Mellbourn

  In Windows 8 it seems natural to me that each person in a family has their own Microsoft Account with which they log in. If you pay for an app on the Windows Store, you can install that same app on several computers using the same Microsoft Account. Good. However, if several persons, in this case my children, each have their own account on the same computer, they do not get access to apps bought on a sibling's account, even if the app has been installed on the same computer. Bad. (Compare this to iOS where you are allowed have several iPhones with different iCloud-connected accounts but all using the same iTunes App Store account, which is perfect for a family where all can then use the same app which was bought just once) Is there any way to share apps between Microsoft Accounts (e.g. members of the same family)? Alternatively, is there a way to run apps that are installed on a computer when you are logged in with a Microsoft Account different than the one used when installing the app?

  Read the article

• Fail to upgrade from 10.10 to 11.04

  - by Ana Solís

  I was using Natty for a while, but while updating to the new release there was a blackout and it wasn't able to finish and Ubuntu failed to load after that. I thought, no worries I got my files backed up and I still got my 10.10 CD I used to put Ubuntu in my computer in the first place. So I installed it again, with the plan of using the update manager to get myself with the current release... Except I get this error: W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/natty/main/source/Sources.gz 404 Not Found , W:Failed to fetch http://extras.ubuntu.com/ubuntu/dists/natty/main/binary-amd64/Packages.gz 404 Not Found , E:Some index files failed to download, they have been ignored, or old ones used instead. My internet connection is just fine, seeing as I'm able to post this, but I don't know what else to do. Tried to download Quantal in another computer and putting it on a DVD (since it won't fit in a CD...) and the stupid thing fails to load it, it skips it over and goes right back to Maverick... (not a faulty disk, it installed Ubuntu just fine in a friends computer...)

  Read the article

• Booting sequence. Ubuntu 12.04 installation and cohabitation with former OSes

  - by Stephane Rolland

  I am on the brink of installing Ubuntu 12.04 Precise Pengolin on the first primary partition of my hard-drive. (A day in History for me since I had always kept a MS windows at this first place). But I have some fears: This is my last computer available (In the past I used to have 2 or even 3 machines so I could always un/plug HDs for recovery operations and rescue) The current booting sequence is not straight forard. So as to explain the boot sequence let me briefly sum-up the history of this laptop computer. It was a dedicated Windows Vista computer. 1st and only Primary partition. Then I added Windows 7 (on the 2nd primary partition) letting the Windows Vista Boot Loader manage the boot sequence. Then I added Ubuntu 10.04 Lucid Lynx on the 1st sub-partition of the Extended Partitionm asking Grub to be the boot loader. But when I ask Grub to launch windows it launches the Vista BootLoader that manages the choice betzeen Vista and 7. So in theory Grub is on the MasterBootRecord - though I understand where the Vista BootLoader remains. Now, I will no longer use the Ubuntu 10.04 ( on extended partition) and also the Windows vista (on the first primary partition). I will install Ubuntu 12.04 on the First Primary, asking it to install a new bootloader. I want to keep the Windows 7 that is already on the Second Primary partition. And I want it to be loaded by the Ubuntu Boot loader(I don4t knoz zhich is included in this version)... And I am afraid the last point will not work.

  Read the article

• how do I make my Dualshock 3 gamepad work in Ubuntu 14.04?

  - by user290527

  When my desktop computer was running Ubuntu 12.04, my PS3 controllers would work with USB. I didn't need to do any special setup. I could just plug it in before I start SuperTuxKart and it would recognize it. I can also do this on my laptop (still running 12.04). Since I gave my desktop a fresh install of Ubuntu 14.04, the controller would never work. I have played with some installed software that I found when looking for information. Here is what I get with xboxdrv: liam@Liam-CustomDesktop:~$ sudo xboxdrv --detach-kernel-driver xboxdrv 0.8.5 - http://pingus.seul.org/~grumbel/xboxdrv/ Copyright © 2008-2011 Ingo Ruhnke <[email protected]> Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details. Controller: PLAYSTATION(R)3 Controller Vendor/Product: 054c:0268 USB Path: 003:012 Controller Type: Playstation 3 USB Your Xbox/Xbox360 controller should now be available as: /dev/input/js0 /dev/input/event16 Press Ctrl-c to quit, use '--silent' to suppress the event output So the existence of this controller is acknowledged at on my computer. But it never works for input. In my old installation, I didn't even need to get software like xboxdrv for it to work. I have never tried bluetooth on either computer, but I don't think I even have that on my desktop. So now, how do I make my gamepad work in Ubuntu 14.04?

  Read the article

• Gateway NE56R & mouse swipe gesture...how to disable?

  - by Anders

  Can anyone tell me how to shut off the swipe gesture mechanism on my computer? It's driving me crazy. I cannot use a single application without having my computer screen minimize every time I move my hand over the mouse following a mouse-click, pointer movement, etc. Having to maximize my spreadsheets, documents, and applications so much is undercutting my productivity. How some software engineer/inventor imagined that this mouse/gesture swipe gimmick would be helpful to computer users is inconceivable to me. It is a massive annoyance. I've found instructions online for disabling this obnoxious feature, but all the instructions involve messing with my registry, which I don't want to do. I will be SO GRATEFUL to any techie who can tell me how to disable this horrible mouse swipe mechanism without having to alter my registry! I'm using a Gateway NE56R Notebook, Windows 7 operating system, and an Inland USB Mouse (model no. 37535). Thank you in advance!

  Read the article

• Scan disk runs on every boot with Windows XP

  - by Sarfraz Ahmed

  I have four drives on my computer. The problem is that each time I start the computer the scan disk check (CHKDSK) runs for a drive even if I shut down my computer properly. I ran the thorough scan disk check but still for that drive, the scan disk check is always performed no matter what. I wonder what is wrong although everything is fine and accessible along with drive data. Could you guys please help me out of this? I am using Windows XP SP2. Thanks.

  Read the article

• How to configure vmware in this situation?

  - by Yousui

  Hi guys, Now I'm using a router to connect my computer to the Internet. I installed VMware Workstation 7 on my computer and installed a guest OS which is CentOS 5.3. Now I want to using putty to connect to the guest OS in my host computer, and I need the guest os can access the Internet too. How can I configure my host's network, guest os and my router? I have little knowledge about network, can you guys give me a step by step direction or something similar? Great thanks!

  Read the article

• ecryptfs - decrypt and mount at boot with USB key

  - by Josh McGee

  I have a system running Ubuntu Server as a testbed for some services that I want to get familiar with. I decided to let the installation procedure set up encryption. I knew all along that I would have to decrypt it with the passphrase in order to get the system booted, but I assumed it wouldn't matter since it will only boot once or twice a month. However, my brother has informed me that he is a victim of power outages at the residence where this server is located. This means we have to explain to his girlfriend how to turn on the computer, attach a keyboard, connect a monitor (she just can't understand that she can type to the computer without a display, so whatever) and input the passphrase for us, while we are at work. I have arrived at the conclusion that I should just put together a USB key that can be plugged in before powering on the computer, to avoid all the trouble. Is this possible with ecryptfs? Is there a tutorial or simple list of instructions available so that I can knock this out and focus back on the stuff I care about? EDIT: I am aware that this is possible with LUKS and dm-crypt, but unfortunately the magical encryption that Ubuntu hands you during the installation is only ecryptfs so my question is specific to that.

  Read the article

• Social IT guy barrier [closed]

  - by sergiol

  Possible Duplicate: How do you deal with people who ask you to fix their computer? Hello. Almost every person that deserves the title of being a programmer as faced the problem of persons that do not even remember the mere existence of those professionals, unless they have serious problems in their computer or some other IT related problem. May be my post will be considered off-topic, but I think it is a very important question. As Joel Spolsky says, IT guys are not Asperger geeks, and they need social life like everybody. But the people that is always asking for favors from us, can ruin deeply our social and personal life. I could experience this by myself. This fact as generated articles like http://www.lifereboot.com/2007/10-reasons-it-doesnt-pay-to-be-the-computer-guy/ and http://ecraazul.wordpress.com/2009/01/29/o-gajo-da-informatica-de-a-a-z/ (I received this one in my mailbox. It is in Portuguese, but I believe it is translated from English). Basically the idea is to criticize people that is always asking us favors. It is even more annoying if you are person very specialized in some subject and a person asks you a completely out-of-that-context question. For example, you are a VBA programmer and somebody says you to that his/her Mobile Internet Pen stopped to work five days ago and needs your help to put it working again. When you go to a doctor to fix your legs, you don't go to an ophthalmologist. You go to an orthopedist. And you pay. I don't how it works in other countries, but in Portugal being a doctor is so an overvalued job, that they earn very much money and almost nobody asks them free favors. So, my question is: what kind of social barrier (or whatever else) do you use to protect yourself from that situation?

  Read the article

• Toshiba monitor not displaying anything

  - by MirroredFate

  Alright, so I agreed to fix a friends computer, thinking it was a software problem, not hardware. I was going to use an XP disc and valid code to swap her from Vista to XP, as apparently Vista had some driver issues. I found out, however, that the real problem was her heat sink was completely clogged, causing the computer to overheat and shut down. So, I took the computer apart and cleaned the heat sink. However, after putting it all back together, and turning it on, nothing at all shows up. I plugged in an external monitor, and nothing shows up on that either. I have double, triple, decuply checked all the connections and everything appears to be plugged in, attached, and in the right place. I am out of ideas. So, my question is, does anyone have any clue what is going on, and have suggestions I could try?

  Read the article

• Clonezilla , NLite and PCs with different hardware specs..

  - by r2b2

  Hi, I used Clonezilla to create and restore images from a master computer to other workstations with the same specs. But the problem now is there are new computers whose hardware specs are different than the ones I maintained (mostly the videocard is different). Is it possible to create a customize Windows XP installer using Nlite and integrate all potential videocard and motherboard drivers ? If I then used this NLite ISO to install to a master computer which i will later clone and restore the image to other workstations, will windows xp still pick up the correct driver set? During XP installation, does the installer transfers all the drivers to the computer's harddisk? Thanks! Ryan

  Read the article

• Ubuntu 12.04 problem with E160 huawei - can't detect the device nad freezing system

  - by Matt

  i just installed 12.04, plug in E160 and nothing happend - modem doesnt mount. i found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. Modem still is not detected. I've tried to add new conection but system can't see my device in setup dialogue. Also i noticed that when i open eg. terminal and try to type sth, system freeze for a while.. Thx for help!

  Read the article

• Windows XP waits for usb drive on almost every operation.

  - by Tomasz Kowalczyk

  Hello everyone, I have a problem with my Windows XP operating system, particularly with the USB device that is plugged in - 1TB WD My Book external drive. I haven't found any information about such behaviour when searching in Internet, so I have to ask You. The problem is: when I am using computer, especially during work (programming), when I try to access any information on a hard disk ("internal" one), Windows seems to "consult" it with the external drive. For example, when I open file selection dialog window, if I try to change directory, system activates external drive, reads something (I hear the disk's operational noise) and after some seconds of such pause it makes the operations I requested. There are many situations in which I can reproduce this behavior - opening My Computer, shutting down system, opening partition folder from My Computer - every operation involves the usage of external drive. Please understand me properly - this is not something that happens EVERY time, but at least "many" times a day. What causes such behavior and how can I "turn off" external drive when it's not needed? Thanks in advance for your answers.

  Read the article

• Windows XP Disc: corrupt or not corrupt?

  - by Wesley

  Hi all, I just finished one of my builds and am trying to install Windows XP onto it. Here are the specs beforehand... Intel Pentium 4 Northwood 2.4 GHz (512KB L2, 533MHz FSB) QDI Superb 4 Motherboard 2x 1GB PC3200 DDR RAM Seagate 80GB IDE HDD Bestec 250W PSU 16MB NVIDIA TNT2 Pro Samsung DVD-ROM USB 2.0 PCI Card Generic PCI Modem The issue right now is that when I'm running through the Windows Setup from my XP Pro SP3 disc, partway through the setup says that a random file on the disc is corrupt and the computer needs to be restarted. Every time I tried booting it up, a different file was noted as corrupt. However, I tested the same disc on another computer and the Windows XP disc ran to the end of the setup screen without error. I tried this on another computer and the same thing. What could possibly be happening on this one build to cause it errors during the Windows Setup? Thanks in advance.

  Read the article

• how to test lan network speed with ps3

  - by Damon

  I am having a heck of a time trying to get videos streaming to my PS3. I want to know if there is some way to test the speed between my PC and ps3 to see if that is the issue. For some reason when things get really slow between the ps3 and my computer (it's a wired connection through a switch), the wireless internet on completely different computer gets slow. I don't know what's causing what, but I don't know why there should be any correlation between internet speed on a wirelessly connected laptop and the LAN speed between a wired ps3 and computer.

  Read the article

• Internet Connectivity Issue

  - by MastaChief11

  Lately, I have been having issues connecting to the internet on one of my computers. The computer I am using now, however, is on the same network as the computer I am posting from. The issues seemed to randomly start about 2 days ago, and the only thing that seemed to fix the issue was to connect to Hotspot Shield VPN. I do not get any yellow warning signs by the Wi-Fi icon in the taskbar. I am sometimes able to use Google search, but I can never go to a website. I am also not able to re-install Hotspot Shield or update Flash because they have to connect to their company's servers. I have tried other VPN services just to see if it would fix anything, but as I expected, nothing changed. I am unsure of how I can fix the issue, and I appreciate all help given. I am running Windows 7 64 Bit Pro on a custom-built computer. Thanks.

  Read the article

• How to troubleshoot a service failure?

  - by AngryHacker

  I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

  Read the article

• Preparing a new physical system with VMWare

  - by Max

  I need to create a new installation of Windows, but at the same time I need this computer. So I decided to create a new physical disk from within VMWare, install windows/drivers/software and then just replace the HDD in the computer. I've bought a new HDD, split it into two partions and installed Windows 7 using the VMWare's ability to use phusical disks. I can see the windows files and directories that have been created on this partition, but when I'm replacing the HDD in the host machine it cannot boot from it. Why is that? Is it at all possible to create a bootable physical disk with VMWare or I should create a virtual disk and then use some HDD imaging tool to copy the HDD image to a physical disk? Maybe there's a better way of installing a new system and working on the computer at the same time?

  Read the article

• Where can I legally download Windows 7 OEM ISOs?

  - by Iszi

  I have a friend who has gotten a serious virus infection and needs her computer rebuilt. However, the computer did not come with any re-installation disks from the OEM and she doesn't have any good backups. I have a TechNet subscription, but I understand that the OEM product key attached to her computer should not work with the Retail or Volume License images I can get from TechNet. Is there anywhere I can legally download a copy of Windows 7 that will work with an OEM key, directly from Microsoft? I'd rather avoid having to work with the OEM's technical support and possibly have to pay for them to ship a disc that (IMHO) the system should have come with in the first place.

  Read the article

• How to restore a windows 7 system from a secondary drive

  - by Klas Mellbourn

  I have a stationary computer with Windows 7 Ultimate 64 bit. The primary (SSD) hard drive seems to have stopped working completely, it is not even visible in BIOS. The computer has a secondary hard drive (non-SSD, NTFS, 2TB). I have had Windows backup running and saving backups to that secondary drive. I am planning to buy a new SSD drive to replace the faulty one. I want to restore the backup to this new SSD drive. What is the most straightforward way to do this? A step-by-step description would be greatly appreciated. Further information: I have a Windows install DVD and the computer has a DVD-drive. The secondary drive is not bootable, so I cannot currently access it. The new SSD drive will probably not be identical to the original, so it might need different drivers

  Read the article

• Is there a way to delay a forced reboot?

  - by jduff

  I realize this is more appropriate for our company's admin group to field. However, pretend they are unresponsive just for the sake of discussion =) If my system is prompting me to reboot now or in a set time (say in 15 mins) is there a way to delay that even further? It is usually just an inconvenient time and I would like to delay beyond the stated time. (ex) System Restart Required: A newly installed program requires this computer to be restarted. Please save your work and restart your computer. Your computer will automatically be restarted in: xxmins... Thanks for any responses in advance!

  Read the article

• Javascript: Machine Constants Applicable?

  - by DavidB2013

  I write numerical routines for students of science and engineering (although they are freely available for use by anybody else as well) and am wondering how to properly use machine constants in a JavaScript program, or if they are even applicable. For example, say I am writing a program in C++ that numerically computes the roots of the following equation: exp(-0.7x) + sin(3x) - 1.2x + 0.3546 = 0 A root-finding routine should be able to compute roots to within the machine epsilon. In C++, this value is specified by the language: DBL_EPSILON. C++ also specifies the smallest and largest values that can be held by a float or double variable. However, how does this convert to JavaScript? Since a Javascript program runs in a web browser, and I don't know what kind of computer will run the program, and JavaScript does not have corresponding predefined values for these quantities, how can I implement my own version of these constants so that my programs compute results to as much accuracy as allowed on the computer running the web browser? My first draft is to simply copy over the literal constants from C++: FLT_MIN: 1.17549435082229e-038 FLT_MAX: 3.40282346638529e+038 DBL_EPSILON: 2.2204460492503131e-16 I am also willing to write small code blocks that could compute these values for each machine on which the program is run. That way, a supercomputer might compute results to a higher accuracy than an old, low-level, PC. BUT, I don't know if such a routine would actually reach the computer, in which case, I would be wasting my time. Anybody here know how to compute and use (in Javascript) values that correspond to machine constants in a compiled language? Is it worth my time to write small programs in Javascript that compute DBL_EPSILON, FLT_MIN, FLT_MIN, etc. for use in numerical routines? Or am I better off simply assigning literal constants that come straight from C++ on a standard Windows PC?

  Read the article

• "MAS SMS-CDMA" Bluetooth service

  - by TuxRug

  I have my phone (LG Rumor Touch on Sprint) connected to my Windows 7 computer by Bluetooth. Usually, one of the services is unidentified and no driver is installed. Occasionally I have an issue that is solved by removing and re-pairing my phone with my computer. The last few times I have paired my computer and phone, the unidentified service was found and installed, as "MAS SMS-CDMA". It sounds like an interface that allows sending and reading SMS messages via Bluetooth. However, there is no software available from Sprint or LG that I have found that offers such functionality. Searching Google for "MAS SMS-CMDA" (with quotes) did not provide anything useful, only what appear to be CMDA information written in Spanish. What can I use this service for, and how do I use it?

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >