Search Results

Search found 11319 results on 453 pages for 'conversation group'.

Page 136/453 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

  • Call For Papers Tips and Tricks

    - by speakjava
    This year's JavaOne session review has just been completed and by now everyone who submitted papers should know whether they were successful or not.  I had the pleasure again this year of leading the review of the 'JavaFX and Rich User Experiences' track.  I thought it would be useful to write up a few comments to help people in future when submitting session proposals, not just for JavaOne, but for any of the many developer conferences that run around the world throughout the year.  This also draws on conversations I recently had with various Java User Group leaders at the Oracle User Group summit in Riga.  Many of these leaders run some of the biggest and most successful Java conferences in Europe. Try to think of a title which will sound interesting.  For example, "Experiences of performance tuning embedded Java for an ARM architecture based single board computer" probably isn't going to get as much attention as "Do you like coffee with your dessert? Java on the Raspberry Pi".  When thinking of the subject and title for your talk try to steer clear of sessions that might be too generic (and so get lost in a group of similar sessions).  Introductory talks are great when the audience is new to a subject, but beware of providing sessions that are too basic when the technology has been around for a while and there are lots of tutorials already available on the web. JavaOne, like many other conferences has a number of fields that need to be filled in when submitting a paper.  Many of these are selected from pull-down lists (like which track the session is applicable to).  Check these lists carefully.  A number of sessions we had needed to be shuffled between tracks when it was thought that the one selected was not appropriate.  We didn't count this against any sessions, but it's always a good idea to try and get the right one from the start, just in case. JavaOne, again like many other conferences, has two fields that describe the session being submitted: abstract and summary.  These are the most critical to a successful submission.  The two fields have different names and that is significant; a frequent mistake people make is to write an abstract for a session and then duplicate it for the summary.  The abstract (at least in the case of JavaOne) is what gets printed in the show guide and is typically what will be used by attendees when deciding what sessions to attend.  This is where you need to sell your session, not just to the reviewers, but also the people who you want in your audience.  Submitting a one line abstract (unless it's a really good one line) is not usually enough to decide whether this is worth investing an hour of conference time.  The abstract typically has a limit of a few hundred characters.  Try to use as many of them as possible to get as much information about your session across.  The summary should be different from the abstract (and don't leave it blank as some people do).  This field is where you can give the reviewers more detail about things like the structure of the talk, possible demonstrations and so on.  As a reviewer I look to this section to help me decide whether the hard-sell of the title and abstract will actually be reflected in the final content.  Try to make this comprehensive, but don't make it excessively long.  When you have to review possibly hundreds of sessions a certain level of conciseness can make life easier for reviewers and help the cause of your session. If you've not made many submissions for talks in the past, or if this is your first, try to give reviewers places to find background on you as a presenter.  Having an active blog and Twitter handle can also help reviewers if they're not sure what your level of expertise is.  Many call-for-papers have places for you to include this type of information.  It's always good to have new and original presenters and presentations for conferences.  Hopefully these tips will help you be successful when you answer the next call-for-papers.

    Read the article

  • Minimum team development sizes

    - by MarkPearl
    Disclaimer - these are observations that I have had, I am not sure if this follows the philosophy of scrum, agile or whatever, but most of these insights were gained while implementing a scrum scenario. Two is a partnership, three starts a team For a while I thought that a team was anything more than one and that scrum could be effective methodology with even two people. I have recently adjusted my thinking to a scrum team being a minimum of three, so what happened to two and what do you call it? For me I consider a group of two people working together a partnership - there is value in having a partnership, but some of the dynamics and value that you get from having a team is lost with a partnership. Avoidance of a one on one confrontation The first dynamic I see missing in a partnership is the team motivation to do better and how this is delivered to individuals that are not performing. Take two highly motivated individuals and put them together and you will typically see them continue to perform. Now take a situation where you have two individuals, one performing and one not and the behaviour is totally different compared to a team of three or more individuals. With two people, if one feels the other is not performing it becomes a one on one confrontation. Most people avoid confrontations and so nothing changes. Compare this to a situation where you have three people in a team, 2 performing and 1 not the dynamic is totally different, it is no longer a personal one on one confrontation but a team concern and people seem more willing to encourage the individual not performing and express their dissatisfaction as a team if they do not improve. Avoiding the effects of Tuckman’s Group Development Theory If you are not familiar with Tuckman’s group development theory give it a read (http://en.wikipedia.org/wiki/Tuckman's_stages_of_group_development) In a nutshell with Tuckman’s theory teams go through these stages of Forming, Storming, Norming & Performing. You want your team to reach and remain in the Performing stage for as long as possible - this is where you get the most value. When you have a partnership of two and you change the individuals in the partnership you basically do a hard reset on the partnership and go back to the beginning of Tuckman’s model each time. This has a major effect on the performance of a team and what they can deliver. What I have seen is that you reduce the effects of Tuckman's theory the more individuals you have in the team (until you hit the maximum team size in which other problems kick in). While you will still experience Tuckman's theory with a team of three, the impact will be greatly reduced compared to two where it is guaranteed every time a change occurs. It's not just in the numbers, it's in the people One final comment - while the actual numbers of a team do play a role, the individuals in the team are even more important - ideally you want to keep individuals working together for an extended period. That doesn't mean that you never change the individuals in a team, or that once someone joins a team they are stuck there - there is value in an individual moving from team to team and getting cross pollination, but the period of time that an individual moves should be in month's or years, not days or weeks. Why? So why is it important to know this? Why is it important to know how a team works and what motivates them? I have been asking myself this question for a while and where I am at right now is this… the aim is to achieve the stage where the sum of the total (team) is greater than the sum of the parts (team members). This is why we form teams and why understanding how they work is a challenge and also extremely stimulating.

    Read the article

  • Using Recursive SQL and XML trick to PIVOT(OK, concat) a "Document Folder Structure Relationship" table, works like MySQL GROUP_CONCAT

    - by Kevin Shyr
    I'm in the process of building out a Data Warehouse and encountered this issue along the way.In the environment, there is a table that stores all the folders with the individual level.  For example, if a document is created here:{App Path}\Level 1\Level 2\Level 3\{document}, then the DocumentFolder table would look like this:IDID_ParentFolderName1NULLLevel 121Level 232Level 3To my understanding, the table was built so that:Each proposal can have multiple documents stored at various locationsDifferent users working on the proposal will have different access level to the folder; if one user is assigned access to a folder level, she/he can see all the sub folders and their content.Now we understand from an application point of view why this table was built this way.  But you can quickly see the pain this causes the report writer to show a document link on the report.  I wasn't surprised to find the report query had 5 self outer joins, which is at the mercy of nobody creating a document that is buried 6 levels deep, and not to mention the degradation in performance.With the help of 2 posts (at the end of this post), I was able to come up with this solution:Use recursive SQL to build out the folder pathUse SQL XML trick to concat the strings.Code (a reminder, I built this code in a stored procedure.  If you copy the syntax into a simple query window and execute, you'll get an incorrect syntax error) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} -- Get all folders and group them by the original DocumentFolderID in PTSDocument table;WITH DocFoldersByDocFolderID(PTSDocumentFolderID_Original, PTSDocumentFolderID_Parent, sDocumentFolder, nLevel)AS (-- first member      SELECT 'PTSDocumentFolderID_Original' = d1.PTSDocumentFolderID            , PTSDocumentFolderID_Parent            , 'sDocumentFolder' = sName            , 'nLevel' = CONVERT(INT, 1000000)      FROM (SELECT DISTINCT PTSDocumentFolderID                  FROM dbo.PTSDocument_DY WITH(READPAST)            ) AS d1            INNER JOIN dbo.PTSDocumentFolder_DY AS df1 WITH(READPAST)                  ON d1.PTSDocumentFolderID = df1.PTSDocumentFolderID      UNION ALL      -- recursive      SELECT ddf1.PTSDocumentFolderID_Original            , df1.PTSDocumentFolderID_Parent            , 'sDocumentFolder' = df1.sName            , 'nLevel' = ddf1.nLevel - 1      FROM dbo.PTSDocumentFolder_DY AS df1 WITH(READPAST)            INNER JOIN DocFoldersByDocFolderID AS ddf1                  ON df1.PTSDocumentFolderID = ddf1.PTSDocumentFolderID_Parent)-- Flatten out folder path, DocFolderSingleByDocFolderID(PTSDocumentFolderID_Original, sDocumentFolder)AS (SELECT dfbdf.PTSDocumentFolderID_Original            , 'sDocumentFolder' = STUFF((SELECT '\' + sDocumentFolder                                         FROM DocFoldersByDocFolderID                                         WHERE (PTSDocumentFolderID_Original = dfbdf.PTSDocumentFolderID_Original)                                         ORDER BY PTSDocumentFolderID_Original, nLevel                                         FOR XML PATH ('')),1,1,'')      FROM DocFoldersByDocFolderID AS dfbdf      GROUP BY dfbdf.PTSDocumentFolderID_Original) And voila, I use the second CTE to join back to my original query (which is now a CTE for Source as we can now use MERGE to do INSERT and UPDATE at the same time).Each part of this solution would not solve the problem by itself because:If I don't use recursion, I cannot build out the path properly.  If I use the XML trick only, then I don't have the originating folder ID info that I need to link to the document.If I don't use the XML trick, then I don't have one row per document to show in the report.I could conceivably do this in the report function, but I'd rather not deal with the beginning or ending backslash and how to attach the document name.PIVOT doesn't do strings and UNPIVOT runs into the same problem as the above.I'm excited that each version of SQL server provides us new tools to solve old problems and/or enables us to solve problems in a more elegant wayThe 2 posts that helped me along:Recursive Queries Using Common Table ExpressionHow to use GROUP BY to concatenate strings in SQL server?

    Read the article

  • Why does this Maven command produce a LifecycleExecutionException?

    - by ovr
    COMMAND: mvn org.apache.maven.plugins:maven-archetype-plugin:2.0-alpha-4:generate \ -DarchetypeGroupId=org.beardedgeeks \ -DarchetypeArtifactId=gae-eclipse-maven-archetype \ -DarchetypeVersion=1.1.2 \ -DarchetypeRepository=http://beardedgeeks.googlecode.com/svn/repository/releases ERROR: + Error stacktraces are turned on. [INFO] Scanning for projects... [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Internal error in the plugin manager getting plugin 'org.apache.maven.plugins:maven-archetype-plugin': Plugin 'org.apache.maven .plugins:maven-archetype-plugin:2.0-alpha-4' has an invalid descriptor: 1) Plugin's descriptor contains the wrong group ID: net.kindleit 2) Plugin's descriptor contains the wrong artifact ID: maven-gae-plugin 3) Plugin's descriptor contains the wrong version: 0.5.9 [INFO] ------------------------------------------------------------------------ [INFO] Trace org.apache.maven.lifecycle.LifecycleExecutionException: Internal error in the plugin manager getting plugin 'org.apache.maven.plugins: maven-archetype-plugin': Plugin 'org.apache.maven.plugins:maven-archetype-plugin:2.0-alpha-4' has an invalid descriptor: 1) Plugin's descriptor contains the wrong group ID: net.kindleit 2) Plugin's descriptor contains the wrong artifact ID: maven-gae-plugin 3) Plugin's descriptor contains the wrong version: 0.5.9 at org.apache.maven.lifecycle.DefaultLifecycleExecutor.verifyPlugin(DefaultLifecycleExecutor.java:1544) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.getMojoDescriptor(DefaultLifecycleExecutor.java:1851) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.segmentTaskListByAggregationNeeds(DefaultLifecycleExecutor.java:462) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLifecycleExecutor.java:175) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:60) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: org.apache.maven.plugin.PluginManagerException: Plugin 'org.apache.maven.plugins:maven-archetype-plugin:2.0-alpha-4' has an invalid descriptor: 1) Plugin's descriptor contains the wrong group ID: net.kindleit 2) Plugin's descriptor contains the wrong artifact ID: maven-gae-plugin 3) Plugin's descriptor contains the wrong version: 0.5.9 at org.apache.maven.plugin.DefaultPluginManager.addPlugin(DefaultPluginManager.java:330) at org.apache.maven.plugin.DefaultPluginManager.verifyVersionedPlugin(DefaultPluginManager.java:224) at org.apache.maven.plugin.DefaultPluginManager.verifyPlugin(DefaultPluginManager.java:184) at org.apache.maven.plugin.DefaultPluginManager.loadPluginDescriptor(DefaultPluginManager.java:1642) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.verifyPlugin(DefaultLifecycleExecutor.java:1540) ... 15 more [INFO] ------------------------------------------------------------------------ [INFO] Total time: 1 second [INFO] Finished at: Wed Jun 09 19:45:30 CEST 2010 [INFO] Final Memory: 3M/15M [INFO] ------------------------------------------------------------------------

    Read the article

  • crystal reports : cannot determine the queries necessary to get data for this report

    - by phill
    I've recently come across the following error in one of my crystal reports following an accounting system update. Group #1: ? - A : This group section cannot be printed because its condition field is nonexistent or invalid. Format the section to choose another condition field. I've verified every database field being used to ensure it still exists for consistency and checked the formulas for that section. No dice. So to hopefully fix the problem, i remove the section using the Section expert. I run the same database checks. It then complains with the same error for Group #5. So i remove that as well. now I have a new and unusual error when i attempt to run 'Show Query'. the error is: "Cannot determine the queries necessary to get data for this report" I have tried to logon/logoff the database and verify database. No complaints until i try to run, show query. When I attempt to run the report, it also throws the same error. any ideas? Am I approaching this incorrectly? this is done in crystal reports 10. note: this report is run with the sql sa user to eliminate any permission issues.

    Read the article

  • Making a mini paint area in AS3/Flex4

    - by Parris
    So below is the code I have so far. For now I simply want to make it draw a square and have it show up. Right now when I click the area defined in MXML as <components:PaintArea width="100%" height="100%" id="paint-a"></PaintArea> it shows nothing; however, the actionlistener is getting triggered and an element is being added to the group. Not sure exactly what is going on... perhaps for some reason it doesn't think the element is drawable? Anyways thanks for the help! public class PaintArea extends SkinnableContainer { private var canvas:Group; public function PaintArea() { super(); canvas = new Group(); canvas.clipAndEnableScrolling = true; canvas.percentHeight = 100; canvas.percentWidth = 100; canvas.addEventListener(MouseEvent.MOUSE_UP,drawRectangle); this.addElement(canvas); } private function drawRectangle(e:MouseEvent):void{ var r:Rect = new Rect(); r.fill = new SolidColor(0x00ff00,.5); canvas.addElement(r); } }

    Read the article

  • Trying to draw a Rectangle to a Custom Container in Flex4/AS3

    - by Parris
    So below is the code I have so far. For now I simply want to make it draw a square and have it show up. Right now when I click the area defined in MXML as <components:PaintArea width="100%" height="100%" id="paint-a"></PaintArea> it shows nothing; however, the actionlistener is getting triggered and an element is being added to the group. Not sure exactly what is going on... perhaps for some reason it doesn't think the element is drawable? Anyways thanks for the help! public class PaintArea extends SkinnableContainer { private var canvas:Group; public function PaintArea() { super(); canvas = new Group(); canvas.clipAndEnableScrolling = true; canvas.percentHeight = 100; canvas.percentWidth = 100; canvas.addEventListener(MouseEvent.MOUSE_UP,drawRectangle); this.addElement(canvas); } private function drawRectangle(e:MouseEvent):void{ var r:Rect = new Rect(); r.fill = new SolidColor(0x00ff00,.5); canvas.addElement(r); } }

    Read the article

  • kanban scrumish tool(s) to get started

    - by Davide
    After investigating a little bit scrum and kanban, I finally read this answer and decided to start using kanban, picking something from scrum (note that I'm working mostly by myself, and I do have read this question and its answers). Now, my question is: which tool would be best to get started? whiteboard and postit agilezen.com JIRA with greenhopper a spreadsheet (possibly on Google Docs) brightgreenprojects.com Agilo Target Process something else (please specify) Notes about each: I would lean towards the whiteboard, but there are several drawbacks (e.g. cannot make automatic charts, time measurements, metrics, and sometimes I work from home - where I need it most - and it's not convenient to carry :-) I don't want to remember another username/password (I promised to myself to signup only to OpenID-enabled services) My employer has JIRA but my group doesn't use it - I might ask for an account (it shouldn't require another password) and maybe later involve the rest of the group. But I don't know if they are using greenhopper and if it's a big deal installing it. I generally hate spreadsheets maybe overkill? I'd be happy to have a localhost instance, but it could be problematic to give access to the whole group (per network/firewalls) - not a deal-breaker but surely a concern What I'd like to get from this? being more productive tracking how much time I spend in any given task, possibly discussing the issue with my supervisor tracking what "blocks" me most often immediately see where I am compared to my schedule manage in a better way my long todo list (e.g. answering faster to the "what I should do next?" question) Do you have any suggestion? Note on the scrumish tag: read the Henrik Kniberg's PDF. He first introduced the definition of scrumish on page 9.

    Read the article

  • InstallShield 2010 with license - no license for automatic build system (CI) as Windows service

    - by Gilad
    I really need help here. We are using CI build-process (Hudson) as an automated build system using Msbuild. The CI run in Apache Tomcat 6 that run under the credentials of a domain user (not a local Windows user ). Every time the CI try to build an InstallShield project (using isproj files) we get a license error message: " C:\Program Files\MSBuild\InstallShield\2010\InstallShield.targets(62,3): error : -7159: The product license has expired or has not yet been initialized. You must launch the IDE to configure the product license in order to proceed. C:\Program Files\MSBuild\InstallShield\2010\InstallShield.targets(62,3): error : Exception Caught". If I log in to the same machine with the same domain user credentials and build the InstallShield project there is a license and it is working well. Adding the user to the local Users group doesn't help (no license). Adding the user to the local Administrators group helps and it is working. We do not want the user to be in the local Administrators group - for various reasons. What do I need to do to make it work? Do I need to add permissions to the use? Help will be highly appreciated. Gilad

    Read the article

  • How do I use jquery validate remote validation on a field that depends on another field in the form?

    - by Kevin J
    I have a form in which I am using remote validation to check if an email address already exists in the database. However, the catch is that on this form, the user can select between several different "groups", and each group has its own distinct set of email addresses (thus the same email can exist once in each group). The group selection is a dropdown on the form, and the email address is an input field with remote validation. I have a couple issues. First, I have set up my remote rule like this: remote: { url: 'remote_script.php', data: { group_id: $('select.group_id').val() } } However, this seems to statically set the group_id parameter to whatever the first value in the select is. Meaning, if I change the select, then trigger the remote validation again, the group_id parameter does not change First, how can I make this parameter dynamic, depending on the value of a select in the form? Secondly, how do I manually trigger the remote validation on the email address field? When the group_id select is changed, I want to re-trigger the remote validation on the email address field (without changing the value of the field). I tried using $(selector).validate().element('.email_addr') But this appears to only trigger the standard validation (required, email), and not the remote call.

    Read the article

  • Flex HTMLLoader component not raising mouseDown events for all mouse clicks

    - by shane
    I have built a Air 2/Flex 4 kiosk application with Flash Builder 4. Currently I am implementing a touch screen browser to enable users to navigate company training videos. In an attempt to improve the usability of the website on the touchscreen I have placed the HTML component in an adaption of Doug McCune's DragScrollingCanvas (updated to use the flex 4 'Scroller' component) to allow users to scroll the webpage by dragging their finger across the screen. The mouseDown event is used to start scrolling the viewport. In addition the webpage was modified to disable text selection with the following css: html { -webkit-user-select: none; cursor: default; } The problem I face is that the HTMLLoader component only fires a mouseDown if a link/input/button on the webpage is clicked, not when the background or any text is clicked. In addition if I remove the custom css the mouseDown event will not fire when text is being selected, but will if previously highlighted text is clicked. As an alternative I also tried adding a group container with the same dimensions as the HTMLLoader to detect the mouseDown events (so that the group container and HTMLLoader have the same Dragable parent container) and was able to capture mouseDown events and scroll the viewport as expected. However as the mouse event is handled by the group container, I am now unable to navigate the webpage. Does anybody know why the HTMLLoader component is not raising mouseDown events for all mouse clicks?

    Read the article

  • signalR groups - connecting/disconnecting and sending - am I missing something?

    - by Terry_Brown
    very new to signalR, and have rolled up a very simple app that will take questions for moderation at conferences (felt like a straight forward use case) I have 2 hubs at the moment: - Question (for asking questions) - Speaker (these should receive questions and allow moderation, but that will come later) Solution lives at https://github.com/terrybrown/InterASK After watching a video (by David Fowler/Damian Edwards) (http://channel9.msdn.com/Shows/Web+Camps+TV/Damian-Edwards-and-David-Fowler-Demonstrate-SignalR) and another that I can't find the URL for atm, I thought I'd go with 'groups' as the concept to keep messages flowing to the right people. I implemented IConnected, IDisconnect as I'd seen in one of the videos, and upon debugging I can see Connect fire (and on reload I can see disconnect fire), but it seems nothing I do adds a person to a group. The signalR documentation suggests "Groups are not persisted on the server so applications are responsible for keeping track of what connections are in what groups so things like group count can be achieved" which I guess is telling me that I need to keep some method (static or otherwise?) of tracking who is in a group? Certainly I don't seem able to send to groups currently, though I have no problem distributing to anyone currently connected to the app and implementing the same JS method (2 machines on the same page). I suspect I'm just missing something - I read a few of the other questions on here, but none of them seem to mention IConnected/IDisconnect, which tells me these are either new (and nobody is using them) or that they're old (and nobody is using them). I know this could be considered a subjective question, though what I'm looking for is just a simple means of managing the groups so that I can do what I want to - send a question from one hub, and have people connected to a different hub receive it - groups felt the cleanest solution for this? Many thanks folks. Terry

    Read the article

  • ASP MVC C#: LINQ Foreign Key Constraint conflicts

    - by wh0emPah
    I'm having a problem with LINQ. I have 2 tables (Parent-child relation) Table1: Events (EventID, Description) Table2: Groups (GroupID, EventID(FK), Description) Now i want to create an Event an and a child. Event e = new Event(); e.Description = "test"; Datacontext.Events.InsertOnSubmit(event) Group g = new Group(); g.Description = "test2"; g.EventID = e.EventID; Datacontext.Groups.InsertOnSubmit(g); Datacontext.SubmitChanges(); When i debug, i can see that after inserting the event. the EventID has gotten a new value (auto increment). But when Datacontext.SubmitChanges(); gets called. I get the following exception "The INSERT statement conflicted with the FOREIGN KEY constraint ... I know this can be solved by creating a relation in the LINQ diagram between Events and groups. And then setting the entity itself. But i don't want to load the events everytime i ask a list of groups. All i need is some way that when inserting the group fails, the event insert won't be comitted in the database. Sorry if this is a bit unclear, My english isn't really good. Thanks in advance!

    Read the article

  • WPF MVVM Picklist Example

    - by Tim
    Hi, I am looking for a way of easily maintaining a list of Users belonging to a particular Group. I have thought about using a Picklist, where I have 2 listboxs, the first contains a list of Users the second a list of Users belonging to the Group. There will be buttons to allow the adding and removing of selected Users from the Group. As users are added they move from the left listbox to the right, as they are removed they are move from the right to the list. This is pretty common situation. Do you know of any examples of doing this in WPF using the MVVM pattern? I am having difficulty understand how the binding may work to my View Model and Business Entities. Especially persisting the data back to the database. I am using stored procedure calls to do the CRUD logic, so I need to keep a list of which Users had been removed so I can delete them. Is this the best way to perform this functionality or is there a better way. I simply want to pick from a list (the list may be large).

    Read the article

  • Problem upgrading eclipse rcp app from 3.3 to 3.5 on Mac OS

    - by Alb
    I previously had an eclipse rcp app based on eclipse 3.3 pugins deployed on both windows and mac OS X 10.4. i'm now trying to port the app to java 1.6 and eclipse 3.5 (Build id: 20100218-1602) plugins on Mac OS X 10.5.8 (Leopard). I can launch the product from eclipse 3.5 on windows but not on Mac OS X. I have the 64bit cocoa eclipse IDE and java 6. In the launch configuration I set runtime JRE to JVM 1.6.0 and added required plugins. The plugins validate and everything else looks similar to windows configuration where it works, but when I launch i only get the following two lines in the console: 2010-03-16 13:29:32.742 java[758:10b] [Java CocoaComponent compatibility mode]: Enabled 2010-03-16 13:29:32.744 java[758:10b] [Java CocoaComponent compatibility mode]: Setting timeout for SWT to 0.100000 and then the program appears to just hang indefinitely. There is nothing written to the .log file so I'm not sure what error there is. EDIT: Here's what Yourkit profiling says before all cpu activity stops. +----------------------------------------------------------------------------+----------------+-----------------+ | Name | Time (ms) | Own Time (ms) | +----------------------------------------------------------------------------+----------------+-----------------+ | +---<All threads> | 2,799 100 % | | | | | | | | +---org.eclipse.equinox.launcher.Main.main(String[]) | 1,924 69% | 0 | | | | | | | +---org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run() | 632 23 % | 0 | | | | | | | +---java.lang.Thread.run() | 135 5 % | 0 | | | | | | | +---java.lang.ClassLoader.loadClassInternal(String) | 106 4 % | 0 | +----------------------------------------------------------------------------+----------------+-----------------+ , and this in the exceptions tab: Exception staticstics +----------------------------------------+--------------+ | Name | Count | +----------------------------------------+--------------+ | +---java.lang.ClassNotFoundException | 102 11 % | | | | | | +---java.net.MalformedURLException | 4 0 % | | | | | | +---java.lang.NoSuchMethodException | 3 0 % | | | | | | +---java.lang.NumberFormatException | 2 0 % | | | | | | +---java.io.FileNotFoundException | 1 0 % | | | | | | +---java.lang.UnsatisfiedLinkError | 1 0 % | +----------------------------------------+--------------+ and here's more details on the ClassNotFoundExceptions mentioned above: java.lang.ClassNotFoundException Start Level Event Dispatcher native ID: 0x8B0B group: 'main' 78 Thread-4 native ID: 0x10B group: 'main' 22 Framework Event Dispatcher native ID: 0xD207 group: 'main' 2 Anyone know why I don't see a trace for this in Eclipse or in any log files? any ideas where I should look? [Updated on: Tue, 16 March 2010 09:37]

    Read the article

  • Rails Fixtures Don't Seem to Support Transitive Associations

    - by Rick Wayne
    So I've got 3 models in my app, connected by HABTM relations: class Member < ActiveRecord::Base has_and_belongs_to_many :groups end class Group < ActiveRecord::Base has_and_belongs_to_many :software_instances end class SoftwareInstance < ActiveRecord::Base end And I have the appropriate join tables, and use foxy fixtures to load them: -- members.yml -- rick: name: Rick groups: cals -- groups.yml -- cals: name: CALS software_instances: delphi -- software_instances.yml -- delphi: name: No, this is not a joke, someone in our group is still maintaining Delphi apps... And I do a rake db:fixtures:load, and examine the tables. Yep, the join tables groups_members and groups_software_instances have appropriate IDs in, big numbers generated by hashing the fixture names. Yay! And if I run script/console, I can look at rick's groups and see that cals is in there, or cals's software_instances and delphi shows up. (Likewise delphi knows that it's in the group cals.) Yay! But if I look at rick.groups[0].software_instances...nada. []. And, oddly enough, rick.groups[0].id is something like 30 or 10, not 398398439. I've tried swapping around where the association is defined in the fixtures, e.g. -- members.yml -- rick name: rick -- groups.yml -- cals name: CALS members: rick No error, but same result. (Later: Confirmed, same behavior on MySQL. In fact I get the same thing if I take the foxification out and use ERB to directly create the join tables, so: -- license_groups_software_instances -- cals_delphi: group_id: <%= Fixtures.identify 'cals' % software_instance_id: <%= Fixtures.identify 'delphi' $ Before I chuck it all, reject foxy fixtures and all who sail in her and just hand-code IDs...anybody got a suggestion as to why this is happening? I'm currently working in Rails 2.3.2 with sqlite3, this occurs on both OS X and Ubuntu (and I think with MySQL too). TIA, my compadres.

    Read the article

  • Django: Complex filter parameters or...?

    - by minder
    This question is connected to my other question but I changed the logic a bit. I have models like this: from django.contrib.auth.models import Group class Category(models.Model): (...) editors = ForeignKey(Group) class Entry(models.Model): (...) category = ForeignKey(Category) Now let's say User logs into admin panel and wants to change an Entry. How do I limit the list of Entries only to those, he has the right to edit? I mean: How can I list only those Entries which are assigned to a Category that in its "editors" field has one of the groups the User belongs to? What if User belongs to several groups? I still need to show all relevant Entries. I tried experimenting with changelist_view() and queryset() methods but this problem is a bit too complex for me. I'm also wondering if granular-permissions could help me with the task, but for now I have no clue. I came up only with this: First I get the list of all Groups the User belongs to. Then for each Group I get all connected Categories and then for each Category I get all Entries that belong to these Categories. Unfortunately I have no idea how to stitch everything together as filter() parameters to produce a nice single QuerySet.

    Read the article

  • elisp compile, add a regexp to error detection

    - by Gauthier
    I am starting with emacs, and don't know much elisp. Nearly nothing, really. I want to use ack as a replacement of grep. These are the instructions I followed to use ack from within emacs: http://www.rooijan.za.net/?q=ack_el Now I don't like the output format that is used in this el file, I would like the output to be that of ack --group. So I changed: (read-string "Ack arguments: " "-i" nil "-i" nil) to: (read-string "Ack arguments: " "-i --group" nil "-i --group" nil) So far so good. But this made me lose the ability to click-press_enter on the rows of the output buffer. In the original behaviour, compile-mode was used to be able to jump to the selected line. I figured I should add a regexp to the ack-mode. The ack-mode is defined like this: (define-compilation-mode ack-mode "Ack" "Specialization of compilation-mode for use with ack." nil) and I want to add the regexp [0-9]+: to be detected as an error too, since it is what every row of the output bugger includes (line number). I've tried to modify the define-compilation-modeabove to add the regexp, but I failed miserably. How can I make the output buffer of ack let me click on its rows? --- EDIT, I tried also: --- (defvar ack-regexp-alist '(("[0-9]+:" 2 3)) "Alist that specifies how to match rows in ack output.") (setq compilation-error-regexp-alist (append compilation-error-regexp-alist ack-regexp-alist)) I stole that somewhere and tried to adapt to my needs. No luck.

    Read the article

  • Theoretically basic RDLC question

    - by user86431
    I'm trying to do something that I thought ought to be reasonably simple but I keep failing... Maybe I just need more coffee, but I thoguht i see if anyone else has solved the problem already. I've got a report, it contains a pile off rows. I want the row to show up grouped by one column called office. I want the groups of offices sorted by their column region. I want the rows within the office group sorted by column name. so it'd show up like this Region1 Agency a a b c Agency b a b Region 2 Agency a1 a b c etc... I can get the grouping, I can get the groups sorted by region. but I can't get the contents of the group to be sorted by name. my curret guess was Group by Office then in the sort tab, sort by region, then office, then name. no joy. Any help is appreciated. if it's relavant I'm using c# and vs2008. Thanks, E-

    Read the article

  • PackageMaker install script for rxtx

    - by vinzenzweber
    I am using PackageMaker to create an installer for my application. During installation I need to run a bash script to properly install rxtx, a JNI library for serial port communication. This library needs to have the directory /var/lock in place with user "root" and group "uucp". The installation script also needs to add the current user to the group "uucp" for the lib to be able to write to /var/lock. Now when I run my application installer the preinstall script is run as root. Therefore "whoami" returns root instead of the user who is actually running the installer. The result is that rxtx is not able to create lock files in /var/lock because the actual user was not added as a member to "uucp". How can I get the user while my script is run by the installer. Or is it better to set the permissions for /var/lock to a different group maybe? Any suggestions are welcome! !/bin/sh curruser=whoami logger "Setting permissions for /var/lock for user $curruser!" if [ ! -d /var/lock ] then logger "Creating /var/lock!" sudo mkdir /var/lock fi sudo chgrp uucp /var/lock sudo chmod 775 /var/lock MacOSX 10.5 and later use dscl if [ sudo dscl . -read /Groups/uucp GroupMembership | grep $curruser | wc -l = "0" ] then logger "Add user $curruser to /Groups/uucp!" sudo dscl . -append /Groups/uucp GroupMembership $curruser # to revert use: # sudo dscl . -delete /Groups/uucp GroupMembership $curruser else logger "GroupMembership of /var/lock not changed!" fi

    Read the article

  • Cross join (pivot) with n-n table containing values

    - by Styx31
    I have 3 tables : TABLE MyColumn ( ColumnId INT NOT NULL, Label VARCHAR(80) NOT NULL, PRIMARY KEY (ColumnId) ) TABLE MyPeriod ( PeriodId CHAR(6) NOT NULL, -- format yyyyMM Label VARCHAR(80) NOT NULL, PRIMARY KEY (PeriodId) ) TABLE MyValue ( ColumnId INT NOT NULL, PeriodId CHAR(6) NOT NULL, Amount DECIMAL(8, 4) NOT NULL, PRIMARY KEY (ColumnId, PeriodId), FOREIGN KEY (ColumnId) REFERENCES MyColumn(ColumnId), FOREIGN KEY (PeriodId) REFERENCES MyPeriod(PeriodId) ) MyValue's rows are only created when a real value is provided. I want my results in a tabular way, as : Column | Month 1 | Month 2 | Month 4 | Month 5 | Potatoes | 25.00 | 5.00 | 1.60 | NULL | Apples | 2.00 | 1.50 | NULL | NULL | I have successfully created a cross-join : SELECT MyColumn.Label AS [Column], MyPeriod.Label AS [Period], ISNULL(MyValue.Amount, 0) AS [Value] FROM MyColumn CROSS JOIN MyPeriod LEFT OUTER JOIN MyValue ON (MyValue.ColumnId = MyColumn.ColumnId AND MyValue.PeriodId = MyPeriod.PeriodId) Or, in linq : from p in MyPeriods from c in MyColumns join v in MyValues on new { c.ColumnId, p.PeriodId } equals new { v.ColumnId, v.PeriodId } into values from nv in values.DefaultIfEmpty() select new { Column = c.Label, Period = p.Label, Value = nv.Amount } And seen how to create a pivot in linq (here or here) : (assuming MyDatas is a view with the result of the previous query) : from c in MyDatas group c by c.Column into line select new { Column = line.Key, Month1 = line.Where(l => l.Period == "Month 1").Sum(l => l.Value), Month2 = line.Where(l => l.Period == "Month 2").Sum(l => l.Value), Month3 = line.Where(l => l.Period == "Month 3").Sum(l => l.Value), Month4 = line.Where(l => l.Period == "Month 4").Sum(l => l.Value) } But I want to find a way to create a resultset with, if possible, Month1, ... properties dynamic. Note : A solution which results in a n+1 query : from c in MyDatas group c by c.Column into line select new { Column = line.Key, Months = from l in line group l by l.Period into period select new { Period = period.Key, Amount = period.Sum(l => l.Value) } }

    Read the article

  • GlassFish Security Realm, Active Directory and Referral

    - by Allan Lykke Christensen
    I've setup up a Security Realm in Glassfish to authenticate against an Active Directory server. The configuration of the realm is as follows: Class Name: com.sun.enterprise.security.auth.realm.ldap.LDAPRealm JAAS context: ldapRealm Directory: ldap://172.16.76.10:389/ Base DN: dc=smallbusiness,dc=local search-filter: (&(objectClass=user)(sAMAccountName=%s)) group-search-filter: (&(objectClass=group)(member=%d)) search-bind-dn: cN=Administrator,CN=Users,dc=smallbusiness,dc=local search-bind-password: abcd1234! The realm is functional and I can log-in, but when ever I log in I get the following error in the log: SEC1106: Error during LDAP search with filter [(&(objectClass=group)(member=CN=Administrator,CN=Users,dc=smallbusiness,dc=local))]. SEC1000: Caught exception. javax.naming.PartialResultException: Unprocessed Continuation Reference(s); remaining name 'dc=smallbusiness,dc=local' at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2820) .... .... ldaplm.searcherror While searching for a solution I found that it was recommended to add java.naming.referral=follow to the properties of the realm. However, after I add this it takes 20 minutes for GlassFish to authenticate against Active Directory. I suspect it is a DNS problem on the Active Directory server. The Active Directory server is a vanilla Windows Server 2003 setup in a Virtual Machine. Any help/recommendation is highly appreciated!

    Read the article

  • Add KO "data-bind" attribute on $(document).ready

    - by M.Babcock
    Preface I've rarely ever been a JS developer and this is my first attempt at doing something with Knockout.js. The question to follow likely illustrates both points. Backgound I have a fairly complex MVC3 application that I'm trying to get to work with KO (v2.0.0.0). My MVC app is designed to generically control which fields appear in the view (and how they are added to the view). It makes use of partial views to decide what to draw in the view based on the user's permissions (If the user is in group A then show control A, if the user in group B then show control B or possibly if the user is in group A don't include the control at all). Also, my model is very flat so I'm not sure the built-in ability to apply my ViewModel to a specific portion of the view will help. My solution to this problem is to provide an action in my controller that responds with an object in JSON format with that contains the JQuery selector and the content to assign to the "data-bind" attribute and bind the ViewModel to the View in the $(document).ready event using the values provided. Failed Proof-of-concept My first attempt at proving that this works doesn't actually seem to work, and by "doesn't work" I mean it just doesn't bind the values at all (as can be seen in this jsfiddle). I've tried it with the applyBindings inside of the ready event and not, but it doesn't seem to make any bit of difference. Question What am I doing wrong? Or is this just not something that can work with KO (though I've seen at least one example online doing the same thing and it supposedly works)? Like I said in the preface, I've only ever pretended to be a JS developer (though I've generally gotten it to work in the past) so I'm at a loss where to start trying to figure out what I'm doing wrong. Hopefully this isn't a real noob question.

    Read the article

  • SimpleXML - "Node no longer exists"

    - by SubZane
    Hi I'm trying to get the video data from this youtube playlist feed and add the interesting data to an array and use that later, but as you can see from the feed some videolinks are "dead" and that results in problems for my code. The error I get is "Node no longer exists" when I try to access $attrs['url']. I've tried for hours to find a way to check if the node exists before I access it but I have no luck. If anyone could help me to either parse the feed some other way with the same result or create a if-node-exists check that works I would be most happy. Thank you in advance $url = 'http://gdata.youtube.com/feeds/api/playlists/18A7E36C33EF4B5D?v=2'; $sxml = simplexml_load_file($url); $i = 0; $videoobj; foreach ($sxml->entry as $entry) { // get nodes in media: namespace for media information $media = $entry->children('http://search.yahoo.com/mrss/'); // get video player URL $attrs = $media->group->player->attributes(); $videoobj[$i]['url'] = $attrs['url']; // get video thumbnail $attrs = $media->group->thumbnail[0]->attributes(); $videoobj[$i]['thumb'] = $attrs['url']; $videoobj[$i]['title'] = $media->group->title; $i++; }

    Read the article

  • How to show AdMob ads in real iPhone device?

    - by iPhoney
    I want to integrate AdMob ads in my iPhone app. I'm using IB way to add the view and follow AdMob's pdf guide: 1. Add AdMob group(AdMobView.h,AdMobDelegateProtocol.h,libAdMob.a) 2. Add required frameworks(AudioToolbox,MediaPlayer,MessageUI,QuartzCore) 3. Add TouchJSON group 4. Add IBSupport group(AdViewController.h,AdViewController.m) 5. Add a 320*48 UIView in IB, add NSObject and change its class to AdViewController, link AdViewController's view to the 320*48 UIView and link AdViewController's viewController to current view controller. Now the iPhone simulator can show ads from AdMob, but when I test it on real device, I get the error "AdMob: Did fail to receive ad". I've tried to add test device's UDID to testDevices array, but still get the same error. - (NSArray *)testDevices { return [NSArray arrayWithObjects: ADMOB_SIMULATOR_ID, DEVICE_UDID, nil]; } Is there any problem in the above steps? Does anybody know why can't I get the ads in real device? By the way, what should be changed to build for real for-sale app, not just for test?

    Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >