Search Results

Search found 10501 results on 421 pages for 'hardware firewall'.

Page 136/421 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• How can virtualization be efficient?

  - by pestaa

  As I understand, the virtual machine and the guest OS doubles the amount of abstraction layers (that are computationally relevant) between the user interface and the pure power of the hardware. Some of the said abstraction layers are (emulated) hardware, drivers, IO interfaces, etc. Top-notch virtualization solutions like Xen probably eliminate a few of these complexities, but I still wonder how efficiency is achieved in these environments; and whether manageable cloud servers are really worth the performance price.

  Read the article

• Where does traffic shaping typically take place?

  - by eekmeter

  As part of upgrading our network infrastructure we are looking to traffic shape our bandwidth since we only have about 3Mb down / 1 Mb up. We're looking to prioritize it so that web browsing gets priority and in the future some VOIP might be added in as well. Internal LAN traffic doesn't need to be controlled just our outbound connection. I've been looking at Cisco hardware and it seems that several of their products do shaping at the core switch, firewall, and router level. I'm wondering where does shaping normally take place? Is it normally done at the router, core switch, or firewall?

  Read the article

• Proxy Server suggestions

  - by Jon Menefee

  Here is the question I have that hopefully is not too general of a question. I have a network with approximately 25 PC's, 3 servers and 25 IP cameras. I have a firewall already on the network and it works fine for what I need, but my client is asking me if there is a way to put a Proxy server on the network to monitor where his employees are going when they surf the Internet. He is not wanting to block them (at least not thru the Proxy server), but he wants to make sure that they arent going to sites that would compromise the networked PCs. I have looked at TMG and it is a little more than what I want. I hesitate adding another firewall to the system because of the security cameras that are presently on the network (IP Cameras). I just want to put a policy in AD that would make certain Users (or Computers) use a Proxy server. Any suggestions on a good proxy server are welcome. Thank you

  Read the article

• telnet: Could not open connection to the host, on port 23

  - by Mihaela

  I need to telnet, to localhost. I am on windows. Once I got the error 'telnet is not recognized...' I looked online and found that I should do pkgmgr /iu:"TelnetClient". I did, then telnet localhost (0r 127.0.0.1, maybe with a port at the end), I get error: Could not open connection to the host, on port 23: Connect failed. I added the port to the firewall, disabled the firewall.. run as admin.. Please help me get telnet to work! Thank you.

  Read the article

• Windows Virtual Machine ping reply fails the first few times

  - by user28471

  I am running a windows Web Server 2008 virtual machine. When I try to ping it from another windows machine the ping reply comes straight back with 100% success. But when I try to ping it from one of the Linux boxes, the ping reply fails with partial or 100% loss the first couple of time and succeeds the third time onwards. I know it is quite strange but can any one think anything that could be causing it. Could anything in the Windows Domain Security or Firewall be "taking time" to allow responding to the ping request? In fact even the firewall is turned off on the virtual machine.

  Read the article

• What special configuration is needed to have a domain controller with DNS on a VM in Hyper-V?

  - by Michael J. Gray

  I have a server running Windows Server 2012 and it only has the Hyper-V role. I have a VM also running Windows Server 2012 and it has the Active Directory: Directory Services and DNS ([example.com]) roles. It has been promoted to a domain controller for [example.com]. In the virtualization host I have joined the domain successfully. On a laptop on the network, it can ping my DNS that is inside the VM on the virtualization host. However, it can't resolve anything through the DNS. I figured it was a firewall issue where the DNS had the firewall allow rule, but the virtualization host did not. I added that, but it didn't fix the issue. On my laptop, I get "UnKnown can't find [example.com]: No response from server" immediately. There's no time out, it just comes back right away. What have I overlooked?

  Read the article

• Disabling certain JBoss ports

  - by Rich

  We are trying to configure JBoss 5.1.0 to be as lightweight and as secure as possible. One of the parts of this process is to identify and close any ports we do not need. Three ports that we have outstanding but don't believe we need are: 4457 - bisocket 4712 - JBossTS Recovery Manager 4713 - JBossTS Transaction Status Manager We don't think we need any of these features (but could be wrong). Bisocket seems to be a way for JMS clients behind a firewall to communicate with JBoss. We hardly use JMS now and when we do, it is very unlikely that we will need this firewall traversing ability. I am less sure about whether we need the two JBossTS ports - I am guessing these are used in a clustered environment - we aren't clustered. So my question is, how do we disable these ports (and associated processes where possible), or if we need these ports, why do we need to keep them open?

  Read the article

• Forwarding requests throught Apache to openVPN

  - by Ency

  I am wondering if it is possible to redirect requests through Apache to eg. OpenVPN. As long as I need to bypass firewall, I need to use port 80/443 for openVPN, but there is Apache server which has both port for itself. Client ---> Firewall (allows 80/443 only) --->| ---> Apache (80/443) ---> OpenVPN (1194) | -------------------------------------------- My Server I was thinking about mod_proxy, but I am not sure if it is good idea, have you got any ideas? I hope possible solution will be applicable on virtual host as well.

  Read the article

• Multiple Session using port 1081 in one box using SSH

  - by regmaster

  Hi Guru's, I am setting Linux Hopping Station to another different servers. My current config to connect to another servers is using different port to connect. e.g ssh -D 1080 -p 22 [email protected] ssh -D 1081 -p 22 [email protected] Now what I would like to have to share the same port from the same box. ssh -D 1080 -p 22 [email protected] ssh -D 1080 -p 22 [email protected] But when I share it, I will get below error: bind: Address already in use channel_setup_fwd_listener: cannot listen to port: 1080 Could not request local forwarding. How could I configure the same port? help. thank you. I want to share the same port because this is needed when configuring firewall in Citrix Firewall on other machine, not needed to many many ports and keep changing when changing connection. thank you.

  Read the article

• Can't connect Tomcat via JMX

  - by Icarokun

  I couldn't connect to one Tomcat server via JMX in a Linux virtual machine. There was no firewall running. All seemed ok. By searching on the web I found out that I have to use the -Djava.rmi.server.hostname property to fix it. It worked, but I don't understand why. My machine has five Tomcat servers running, all of them have JMX enabled in consecutive ports (8008, 8018, 8028...), all of them have the same configuration and only one of them had this issue connecting JMX. No firewall, no -Djava.rmi.server.hostname property in any Tomcat. I understand the problem, but I don't understand why four of my Tomcat servers worked and one of them not. Why is this?

  Read the article

• Is there a way to expose ports when the three default firewalls were disabled

  - by Nactus

  I think I disabled the three firewalls that come with FreeBSD (just for experimentation purposes). I checked the modules that load with the kernel (using "kldstat"). The only modules that load are: kernel -- ng_socket.ko, netgraph.ko, ng_mppc.ko and rc4.ko). I'd like to know what module is still blocking my ports now. After removing all firewall options from the rc.file and re-compiling the kernel without the pf option (or any firewall for that matter), I can't still open ports freely. How does it work exactly? Thanks.

  Read the article

• Unable to connect to FTP sites

  - by Fariborz Navidan

  Since a few days ago I am unable to connect to any FTP site neither through Windows's FTP client nor through other software like WinSCP. But I can login through command line FTP client. I am using Windows 7. ESET firewall is disabled and did not find any blocking rule in windows firewall. A symptom is when enter ftp://my-server.com in windows explorer address bar it says "windows cannot access the folder" and there is no further info in Details section. Please help!

  Read the article

• Best way to "clone" my Windows Server 2008 R2?

  - by A.B. User

  I have a Windows Server 2008 R2 Machine with 1 physical hard drive. I have an exact copy of the hardware of it, which I intend to use a a redundant backup in case my server fails (hardware or software). I'd like to routinely "clone" my production server's hard drive, so that when it fails, I'll just swap it with the latest clone. Is this even possible? If it is, what would be the simplest way to do this?

  Read the article

• LAN full of public ipv4 addresses - How to filter it?

  - by sparc86

  The answer to my question maybe is not that hard but anyways, I do not know what to do. So, I just got in a new job in a Univerisity and I found out that the network (the LAN) is full of public IP addresses. Seriously, the whole LAN (probably more than 150 hosts) has it' own internet IP address and I don't know how to manage it. I have a very good experience using iptables (Linux firewall) in a NAT'ed environment. But then how should I proceed in an environment where all my LAN is working with a bunch of public IP addresses? Should I just use the "forward" rules and ignore the NAT rules or is there any other issue in such environment which I should take care? Can I add a firewall between the router and the LAN in order to produce packet filtering for these public IP addresses in my LAN or will this just not work? Thanks!

  Read the article

• Is the XP VMM a bottleneck on a multi core machine?

  - by JeffV

  I have a dual Xeon hex core machine running an IO intensive application. (WinXP 32) I am seeing a hardware driver (1/2 user mode, 1/2 kernel, streaming data) that is using 6k delta page faults per second. When other applications load or allocate large amounts of memory the driver's hardware buffer gets an underrun (application not feeding it fast enough). Could this be because the kernel is only using one core to service page fault interrupts?

  Read the article

• What do BCU.exe and BCUService actually do?

  - by ChrisF

  I've got a Gigabyte G32M-ES2L motherboard with an Intel Core 2 Duo E7500 2.93GHz CPU running Windows XP SP3 (fully up to date). Today when I booted the machine my firewall (Sygate Personal Firewall) warned me that BCUService.exe wanted to make a call out to the internet. Wondering what they were I did a Google search and while I found out that these programs weren't malware, I didn't find out what they actually do. The information seemed to boil down to: Part of Browser Configuration Utility Auto-recovery Service from DeviceVM, Inc. This program is not important for your system process, but should not be terminated unless suspected to be causing problems. Source So before I remove them from my system does anyone know what they actually do and its it worth them taking over 4Mb of memory?

  Read the article

• Cannot access internet with NAT from Virtual PC

  - by asksuperuser

  Maybe it's due to firewall, how can I check ?

  Read the article

• ftp-client works fine. ftp-tls-client fails on one computer and works on another

  - by ispiro

  Connecting to ftp - from a Windows Server 2012 - it works both secure (-over tls) and unsecure. From a Windows 7 it succeeds unsecure but fails when secure. (Using explicit TLS and passive mode.) filezilla: 234 AUTH command ok. Expecting TLS Negotiation. Initializing TLS... Connection timed out I've tried many things but nothing helps. (I'm also trying this programmatically. For details see: http://stackoverflow.com/questions/25393716/ftp-ssl-fails-after-expecting-tls-negotiation ) The fact that it does succeed from one computer proves that the ftp server is fine. And the fact that the Windows 7 computer succeeds without tls proves that it's not a NAT/firewall problem (besides, it failed even after disabling firewall etc.). I'm not sure where to start looking. Perhaps a difference between PC Windows and Windows Server? EDIT The ftp server is on a Windows Server 2012.

  Read the article

• How I can view and block specific applications temporarily from accessing Internet?

  - by Curious Apprentice

  I don't want to block any application permanently from accessing internet. I just want to block some specific applications for a particular time period to gain speed in running some other. I know about one such great tool - that is "Comodo firewall". It can smoothly block and accurately display apps accessing internet. The only problem of installing this is, Windows recommends only one firewall apps and as Im running Windows 7 x64 Ultimate there will be complications if I install this one. I need a tool which can accurately display which apps are accessing internet (through which port) and how much data they are receiving or sending. I also need some arrangement within the app so that I can easily temporarily block that app from accessing internet.

  Read the article

• Windows Update and IE fail to connect, but Chrome fine?

  - by I Gottlieb

  Out of ideas on this one. (Running Windows Vista.) I have a program that accesses the internet to retrieve financial market data. One day it tells me that it can't log in -- timeout error. I check the documentation and it says must have a working copy of IE browser installed. I check IE (have IE9) and sure enough -- it just spins. No error message, not timeout, no 'try later' -- just spins -- as far as I can tell, indefinitely. Any page, any address. Even access to a localhost site just spins. Chrome works fine. So does another program I have that fetches market data. Windows 'diagnose and repair' says my internet connection is working fine. I tried uninstall/re-install of IE. Same spinning. I tried to install Windows Updates, and guess what? I can't. I comes up with error 80072efd; checked documentation for the error and it says I should check firewall blockage. Thing is, the only firewall I have is Windows Firewall, and obviously it wouldn't be blocking Windows Update. In contrast, Windows 'Help' in all programs has no problem accessing the Internet. I had a filter on the internet connection, and this was updated just prior to first appearance of the problem. But I uninstalled the filter entirely (official, with passwd from the company's service rep) -- and no difference. I'm guessing that a high level Windows network service file is corrupted -- used only by MS programs and their ilk, but how do I find it? I'd like to avoid having to do a clean install of Windows. Much obliged for any insight. IG Ramhound -- Thanks for reply. I'm familiar with virtual machines as in e.g. JVM or an emulator for an alternative architecture or (theoretical) Turing Machine equivalence. But I'm not familiar with the way you're using the term. Please clarify -- what one needs for this VM 'test' and why you expect it will provide an advantage of insight into the problem. And what sort of 'configuration issue' are you referring to? IG

  Read the article

• USB ports not working after restoring back

  - by jmainock

  After restoring this computer with a backup it appears that 2 of the 5 usb ports no longer work. I'm thinking that there is something corrupted on the backup disk causing the failure. When I plug in a usb keyboard to these ports the system will not recognize the new hardware on the 2 bad ports but does recognize new hardware on the remaining three ports. All the ports were working prior to the restoration.

  Read the article

• USB ports not working after restoring back

  - by jmainock

  After restoring this computer with a backup it appears that 2 of the 5 usb ports no longer work. I'm thinking that there is something corrupted on the backup disk causing the failure. When I plug in a usb keyboard to these ports the system will not recognize the new hardware on the 2 bad ports but does recognize new hardware on the remaining three ports. All the ports were working prior to the restoration.

  Read the article

• Windows Server 2003 seems to pick the 'outgoing' IP address at random from all the ones configured in IIS, how can I make it just use one?

  - by ioSamurai

  We have multiple sites in IIS with different IP addresses. This is cool, want different IPs to all go to this server and use the proper site. However I discovered an issue that when the server makes an outgoing connection, I cannot predict which IP it will use. I had to have one client add ALL the IPs to their firewall so that a certain service could communicate with their server. Well now the time has come to add another IP/site to IIS but I had told them they would not need to add any more IPs. So the question is, how can I make Windows Server 2003 use only ONE specific IP for outgoing calls instead of it being unpredictable? If this is not a good enough description, when I was RDPed into the server and I opened IE and went to 'what is my IP' it was sometimes different which is how I discovered why the one client's firewall was suddenly refusing the connections. How can I just make outgoing calls originate from a static IP yet still allow multiple IPs pointing to different sites in IIS?

  Read the article

• How to get to c$ with Windows 7

  - by tooshel

  I'm trying to get to the admin share on a Windows 7 home machine from a Windows 7 home machine and nothing is working. I enabled file and print sharing in the firewall and even turned Windows Firewall off. I can get to the "Users" share that I remember setting up when I first installed. When I go to \machinename\c$ instead of \machinename\users I get asked for a username and password and nothing works (not even machinename/adminuser). \users works because I'm using the same username and password on both machines (like in the XP/2000 days). Is the admin share c$ gone in Windows 7?

  Read the article

• SQL SERVER – Resolving SQL Server Connection Errors – SQL in Sixty Seconds #030 – Video

  - by pinaldave

  One of the most famous errors related to SQL Server is about connecting to SQL Server itself. Here is how it goes, most of the time developers have worked with SQL Server and knows pretty much every error which they face during development language. However, hardly they install fresh SQL Server. As the installation of the SQL Server is a rare occasion unless you are DBA who is responsible for such an instance – the error faced during installations are pretty rare as well. I have earlier written an article about this which describes how to resolve the errors which are related to SQL Server connection. Even though the step by step directions are pretty simple there are many first time IT Professional who are not able to figure out how to resolve this error. I have quickly built a video which is covering most of the solutions related to resolving the connection error. In the Fix SQL Server Connection Error article following workarounds are described: SQL Server Services TCP/IP Settings Firewall Settings Enable Remote Connection Browser Services Firewall exception of sqlbrowser.exe Recreating Alias Related Tips in SQL in Sixty Seconds: SQL SERVER – FIX : ERROR : (provider: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server) (Microsoft SQL Server, Error: ) SQL SERVER – Could not connect to TCP error code 10061: No connection could be made because the target machine actively refused it SQL SERVER – Connecting to Server Using Windows Authentication by SQLCMD SQL SERVER – Fix : Error: 15372 Failed to generate a ser instance od SQL Server due to a failure in starting the process for the user instance. The connection will be closed SQL SERVER – Dedicated Access Control for SQL Server Express Edition – An error occurred while obtaining the dedicated administrator connection (DAC) port. SQL SERVER – Fix : Error: 4064 – Cannot open user default database. Login failed. Login failed for user What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Query, SQL Scripts, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Excel

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >