Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 136/318 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• Processor Upgrade HP Elite M9510F

  - by DaveM

  I have an HP 9510F that uses the ASUS IPIBL-LB MB. It ships with an Intel Q8200 Quad Core processor but it does not support virtualization. Specs for the board from HP (ASUS does not list this OEM board) do not show support for the Intel Q8200 it ships with (obviously incorrect) but only these • Supports the following processors: o Intel Core 2 Quad (Yorkfield core) Q9xxx o Intel Core 2 Duo (Wolfsdale core) E8xxx o Intel Core 2 Quad (Kentsfield core) up to Q6600 o Core 2 Duo E6x00 (Conroe core) up to E6700 o Core 2 Duo E4x00 (Conroe core) up to E4400 Can this MB support the Q8400 or will it only support the indicated Q9xxx series? Naturally HP is little help here. Specs are located hereHP/ASUS MB specs

  Read the article

• Gnome-Network-Manager Config File Migration

  - by Jorge

  I think I have an issue with gnome-network-manager, I used to have a lot of connections configured, Wireless, Wired and VPN. After upgrading to 12.04 (from 11.10) I lost every configuration. I realized that the configs that used to be saved in $HOME/.gconf/system/networking/connections now are being saved in /etc/NetworkManager/system-connections/. I don't know how to migrate my settings to the new config file format Can anybody help me? jorge@thinky:~$ sudo lshw -C network *-network description: Ethernet interface product: 82566MM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:1f:e2:14:5a:9b capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k firmware=0.3-0 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:fe000000-fe01ffff memory:fe025000-fe025fff ioport:1840(size=32) *-network description: Wireless interface product: PRO/Wireless 4965 AG or AGN [Kedron] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 61 serial: 00:21:5c:32:c2:e5 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl4965 driverversion=3.2.0-23-generic-pae firmware=228.61.2.24 ip=192.168.2.103 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:df3fe000-df3fffff jorge@thinky:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise jorge@thinky:~$ uname -a Linux thinky 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686 i686 i386 GNU/Linux jorge@thinky:~$ dpkg -l | grep -i firm ii linux-firmware 1.79 Firmware for Linux kernel drivers

  Read the article

• lubuntu - Sound card detected but no sound

  - by CookieMonster

  I installed Lubuntu 12.10 on my old laptop (Sharp Mebius PC-MR80J), but sound does not work. Here are things I tried. aplay -l does not output anything. When I run alsamixer, I see only one bar that says "Beep". I installed pavucontrol, pulseaudio, pulseaudio-utils and libgtk-3-0 and checked output devices, but I only see "Dummy ouput" and there is no hardware output devices. cat /proc/asound/cards returns the following. 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfeb38000 irq 40 cat /proc/asound/devices outputs the following. 1: : sequencer 2: [ 0- 1]: hardware dependent 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer The laptop was running Windows XP before and sound (both input and outpu) was working. What can I do now?

  Read the article

• Boggling Direct3D9 dynamic vertex buffer Lock crash/post-lock failure on Intel GMA X3100.

  - by nj

  Hi, For starters I'm a fairly seasoned graphics programmer but as wel all know, everyone makes mistakes. Unfortunately the codebase is a bit too large to start throwing sensible snippets here and re-creating the whole situation in an isolated CPP/codebase is too tall an order -- for which I am sorry, do not have the time. I'll do my best to explain. B.t.w, I will of course supply specific pieces of code if someone wonders how I'm handling this-or-that! As with all resources in the D3DPOOL_DEFAULT pool, when the device context is taken away from you you'll sooner or later will have to reset your resources. I've built a mechanism to handle this for all relevant resources that's been working for years; but that fact nothingwithstanding I've of course checked, asserted and doubted any assumption since this bug came to light. What happens is as follows: I have a rather large dynamic vertex buffer, exact size 18874368 bytes. This buffer is locked (and discarded fully using the D3DLOCK_DISCARD flag) each frame prior to generating dynamic geometry (isosurface-related, f.y.i) to it. This works fine, until, of course, I start to reset. It might take 1 time, it might take 2 or it might take 5 resets to set off a bug that causes an access violation either on the pointer returned by the Lock() operation on the renewed resource or a plain crash -- regarding a somewhat similar address, but without the offset that it has tacked on to it in the first case because in that case we're somewhere halfway writing -- iside the D3D9 dll Lock() call. I've tested this on other hardware, upgraded my GMA X3100 drivers (using a MacBook with BootCamp) to the latest ones, but I can't reproduce it on any other machine and I'm at a loss about what's wrong here. I have tried to reproduce a similar situation with a similar buffer (I've got a large scratch pad of the same type I filled with quads) and beyond a certain amount of bytes it started to behave likewise. I'm not asking for a solution here but I'm very interested if there are other developers here who have battled with the same foe or maybe some who can point me in some insightful direction, maybe ask some questions that might shed a light on what I may or may not be overlooking. Another interesting artifact is that the vertex buffer starts to bug if I supply both D3DLOCK_DISCARD and D3DLOCK_NOOVERWRITE together which, even though not very logical (you're not going to overwrite if you've just discarded all), gives graphics glitches. Thanks and any corrections are more than welcome. Niels p.s - A friend of mine raised the valid point that it is a huge buffer for onboard video RAM and it's being at least double or triple buffered internally due to it's dynamic nature. On the other hand, the debug output (D3D9 debug DLL + max. warning output) remains silent. p.s 2 - Had it tested on more machines and still works -- it's probably a matter of circumstance: the huge dynamic, internally double/trippled buffered buffer, not a lot of memory and drivers that don't complain when they should.. Unless someone has a better suggestion; I'd still love to hear it :)

  Read the article

• How to force a new Notification in notify-osd to show up without waiting for the earlier one to exit?

  - by Nirmik

  I have made a script(and a .desktop shortcut leading to this script) for starting and stoping xampp... It checks the status of xampp and accordingly either starts or stops xampp. Now i have assigned a notification as soon as the script is started to display "Starting xampp..." or "Stopping xampp..." and then when xampp is started or stopped,it displays "Xampp started..." or "Xampp stopped..." I've used notify-send to show notification as seen in the script below Now the thing is that here,the second notification waits for the 1st one to disappear and then pops up even if xampp has started/stopped. I want the new notification to appear immediately by forcing the earlier one to exit before the completion of its life-cycle. This can be seen to take plce when you activate/deactivate wireless/networking immediately... For example the "Wireless enabled" comes up on selecting enable wireless and if you immediately select disable wireless,the "Wireless disabled" notification comes up without waiting for "Wireless enabled" notification to complete its life-cycle. So how do i achieve this? #!/bin/sh SERVICE='proftpd' if ps ax | grep -v grep | grep $SERVICE /dev/null then notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "Stopping XAMPP..." && gksudo /opt/lampp/lampp stop && notify-send -i /opt/lampp/htdocs/xampp/img/logo- small.gif "XAMPP Stoped." else notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "Starting XAMPP..." && gksudo /opt/lampp/lampp start && notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "XAMPP Started." fi On the man page for notify-send I found --urgency=LEVEL or -u where levels are low, normal, critical. Is this of any use? making it critical? Also I tried it with the command- notify-send -u=critical"Testing" but that dint work...it gives the error- Unknown urgency criticalTesting specified. Known urgency levels: low, normal, critical. or if I give the command notify-send -u=LOW"Testing" it gives me error missing argument to -u Any relation??

  Read the article

• Networking works on Live CD but not after installation.

  - by user9054

  Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd, so happily I installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started . It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up. Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP. I cannot understand why wifi-radar is using DHCP when I have specified manual settings. Then I decided to use the wired network to surf the net looking for a solution. So I plugged in the network cable from my modem , configured eth0 , used pppoeconf and connected the net. Then I foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon and it said something about network error or something. Now my ifconfig shows only lo .Can anybody help me on this. PS : 1) I tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected. 2) I have made myself the administrator so that there is no issue of rights or anything.

  Read the article

• Second monitor not detected

  - by configurator

  Note: I've seen this question quite a lot, but in all the cases I could find with answers, the answer was either "I don't know" or "use nvidia-settings (which is irrelevant to me)." I'm using Intel Sandybridge Desktop graphics, with a P8H61-M LE motherboard. How do I get Ubuntu to detect my second monitor? Clicking "Detect Displays" here doesn't do anything. Here's some system info: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) $ uname -a Linux clyde 3.5.0-13-generic #13-Ubuntu SMP Tue Aug 28 08:31:47 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ hardinfo [copied from the UI] -Display- Resolution : 1920x1080 pixels Vendor : The X.Org Foundation Version : 1.12.3 -Monitors- Monitor 0 : 1920x1080 pixels -Extensions- BIG-REQUESTS Composite DAMAGE DOUBLE-BUFFER DPMS DRI2 GLX Generic Event Extension MIT-SCREEN-SAVER MIT-SHM RANDR RECORD RENDER SECURITY SGI-GLX SHAPE SYNC X-Resource XC-MISC XFIXES XFree86-DGA XFree86-VidModeExtension XINERAMA XInputExtension XKEYBOARD XTEST XVideo -OpenGL- Vendor : Intel Open Source Technology Center Renderer : Mesa DRI Intel(R) Sandybridge Desktop Version : 3.0 Mesa 8.1-devel Direct Rendering : Yes I've tried upgrading everything from ppa:xorg-edgers/ppa and ppa:glasen/intel-driver. I've also installed various tools I've found in other threads (e.g. hardinfo) but they weren't really helpful to me as I don't know what to make of the data. How do I get Ubuntu to detect my second monitor?

  Read the article

• Sound issues after trying everything

  - by Lerp

  I cannot get my sound working properly, no matter what I do, there's always some problem. It's very annoying as it's the only thing preventing me from making Ubuntu my main OS. At the moment my sound always plays through both my speakers and my headphones regardless except the sound through the headphones is crackly. It is also a bit quiet even though everything is maxed. I've managed to improve the situation to a point where the sound out of my speakers is perfect but I have none at all from my headphones. I do have two connectors listed in the sound settings but regardless of which one is selected it always plays through the speakers. I think this might have something to do with the fact that my speakers are plugging into the front of my computer, typically the headphone jack, and my headphones are plugging into the back but when I try disconnecting the speakers from the front there is still no sound from the headphones. I fixed the speaker sound by going through the sound settings and making sure they were all set to 100% then rebooting. Things I have tried: Maxing everything and unmuting everything in alsamixer Uninstalling pulseaudio Making gstreamer use only alsa via gstreamer-properties. This worked with the sound test button including independent sound between headphones and speakers but when I reset the computer it no longer worked. So I tried setting it manually in gconf-editor which didn't work either. Reinstalling alsa and pulseaudio Setting the model in /etc/modprobe.d/alsa-base.conf to 6stack and 6stack-dig neither worked. Upgrading to 12.10 Here's some command output to help you diagnose my problem. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 sudo lshw -C sound *-multimedia description: Audio device product: 82801JI (ICH10 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:70 memory:f7ff8000-f7ffbfff cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 options snd-hda-intel model=6stack

  Read the article

• JavaOne - Java SE Embedded Booth - Digi - Home Health Hub (HHH)

  - by David Clack

  Hi All,  So another exciting platform we will have in the booth at JavaOne is the Digi  Home Health Hub (HHH) platform. http://www.digi.com/products/wireless-wired-embedded-solutions/single-board-computers/idigi-telehealth-application-kit#overview This is a Freescale reference design that has been built by Digi, the system is powered by a Freescale i.MX28 ARM SOC, what's really exciting me is it has every wireless protocol you could ever want on a single motherboard. Ethernet, 802.11b/g/n Wi-Fi, Bluetooth, ZigBee, configurable Sub-GHz radio, NFC plus USB, audio and LCD/touch screen option. I've been experimenting with lots of wireless capable healthcare products in the last few months, plus some Bluetooth Pulse / Oxy meters, we have been looking at how the actual healthcare wireless protocols work. Steve Popovich - Vice President, Digi Internationalwill be doing a talk at the Java Embedded @ JavaOne conference in the Hotel Nikko, right next door to the JavaOne show in the Hilton. If you are registered at JavaOne you can come over to the Java Embedded @ JavaOne for $100 Come see us in booth 5605 See you there Dave

  Read the article

• ALSA samples capture: cannot open device

  - by Randagio

  I'm quite new to Linux (Lubuntu 12.04 for sake of precision) and ALSA programming at all. I'm trying to write a C program to capture audio from internal PC microphone for processing it. So as first step I google a bit and I found this article for capturing audio samples A tutorial on using the ALSA Audio API but when I compile it and execute it with: ./capture "default" or ./capture "hw:0,0" and all the possible variants on theme it always raises the error: cannot open device hw:0,0 (no such file or directory). So the issue is: what is the name of the mic audio device to pass as parameter to record the audio from mic ? The mic is working ok because the Sound Recorder program records sounds perfectly and I can playback them. The output of the aplay -l is the following : **** List of PLAYBACK Hardware Devices **** card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 4: Intel ICH - IEC958 [Intel 82801DB-ICH4 - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 and this is the amixer output (cut) Simple mixer control 'Master',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 4 [13%] [-40.50dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [on] Front Right: Playback 31 [100%] [12.00dB] [on] Simple mixer control 'CD',0 Capabilities: pvolume pswitch cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 22 [71%] [-1.50dB] [on] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Stereo Mic',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] so for aplay it seems I have no recording device, but for amixer I've got the mic, a mic boost and mic stereo as well with all those gorgeous stuffs on their place !!. If so, how could my Sound Recorder record the audio without any problem at all ?!?! For sure I'm giving the wrong device name to the command line for capturing audio but I'm loosing the hope for finding the correct one ! Please help....before I tear my hair out !!!

  Read the article

• Light Peak, "le successeur de l'USB 3", devrait débarquer dès la fin de l'année avec des taux de tra

  Pour Intel, l'USB 3 a déjà un successeur : Light Peak Qui pourra atteindre les 10 Gbps et qui devrait débarquer dès fin 2010 Il y a à peine une an, Intel dévoilait Light Peak, une technologie de transfert de données par fibre optique qui flirte avec les 10 Gbps... soit le double de l'USB 3. Or l'USB 3 semble tarder à s'imposer. Les propos de Kevin Kahn, senior manager chez Intel lors de l'Intel Developer Forum de Pékin, n'en ont que plus de résonance. "Nous voyons [Light Peak] comme le successeur logique de l'USB 3.0. D'une certaine manière nous aimerions réaliser le tout dernier cable dont vous aurez besoin". Même si une période de cohabitation des deux ...

  Read the article

• usb hub not working on resume from suspend

  - by user1781498

  All the usb ports on my laptop work but when I resume from suspend some the usb ports don't work. lsusb Before Suspend: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f3:014b Elan Microelectronics Corp. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 04f2:b3a6 Chicony Electronics Co., Ltd Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb After Suspend: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f3:014b Elan Microelectronics Corp. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• Getting vga_switcheroo with ATI Mobility Radeon 5650 HD to work

  - by stevejb

  Hello! I have a new HP dv7 laptop with ATI Mobility Radeon HD 5650 graphics card, and also Intel graphics (switchable). I have done the following and want to understand what is going on with my graphics driver Resized windows 7 and did fresh install of 10.10 Booted into 10.10 and things seemed to be working okay Enabled ATI graphics, and was clearly working on the ATI rather than Intel GPU (desktop cube worked) Rebooted, got an error that modprobe could not load modules.dep, and also something about i915 symbols Rebooted into recovery mode, modified xorg.conf to remove the mention of fglrx Rebooted, and the errors show, but then x starts but clearly in intel graphics I would ideally like to be able to switch between the ATI and Intel graphics, a la vga_switcheroo. My first problem seems to be that the folder /sys/kernel/debug/vgaswitcheroo does not exist, hinting at some kind of kernel issue. What can I do to get this available? Thanks!

  Read the article

• Use hotplug and turn on/off PCI device for replacing NIC

  - by Ryota Hashimoto

  How can I turn off the PCI slots and change the device (especially NIC) without shutting the server down? I found a similar question (How do I turn off PCI devices?) but there are no /sys/bus/pci/slot and no files in /sys/bus/pci/slots. I'm using 12.04 LTS. $ uname -a Linux d1-c1-r1-p1 3.2.0-38-generic #61-Ubuntu SMP Tue Feb 19 12:18:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux $ lspci | grep Eth 04:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 04:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 09:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) 09:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) $ ls /sys/bus/pci/ devices/ drivers_probe slots/ drivers/ rescan uevent drivers_autoprobe resource_alignment $ ls /sys/bus/pci/devices/0000\:04\:00.0/ broken_parity_status driver modalias rescan subsystem class enable msi_bus reset subsystem_device config firmware_node net resource subsystem_vendor consistent_dma_mask_bits irq numa_node resource0 uevent device local_cpulist power resource2 vendor dma_mask_bits local_cpus remove resource3

  Read the article

• Connect Lenovo W520 with TV using VGA output

  - by el10780

  I am trying to connect my Lenovo Thinkpad W520 with my 32 inch TV (Samsung) using he VGA output.The problem is that after connecting it with the TV I go to System Settings and then Monitors but it doesn't show up there.I rebooted my system and again nothing happened.So I tried to change my default video card in the BIOS and I chose to boot with Intel's card only.Again though nothing happened.I didn't tried with my NVidia video card because last time I did that Ubuntu was completely destroyed after saving the configuration file through the NVidia's X Server Control Panel.My laptop has NVidia Optimus technology,but I can choose from the BIOS which video card I want to use.After running : lspci | grep VGA in terminal the results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (It shows only the Intel's video card because curently I have chose to boot using only Intel's video card.If I chose from the BIOS that I want to use the NVidia Optimus Technology and the option to let the system whether or not the Optimus technology is supported then both cards will show up in terminal after running lspci | grep VGA.)

  Read the article

• Problem with wake after suspend using USB remote.

  - by Bod

  Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

  Read the article

• Desktop goes blurry / granulated

  - by Bonfire

  After few minutes using, desktop and fonts in unity-menu goes blurry. See screenshot.! In all applications (browser etc.) graphics seem to be allright. After rebooting problem disappears for few minutes. Changing the wallpaper also makes the desktop clear (for a while) but fonts are still blurry. I have ubuntu 12.04 and windows xp dualbooted. lspci: 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) 00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) lshw -c video: *-display:0 description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0100000-d017ffff ioport:30c0(size=8) memory:c0000000-cfffffff memory:d0180000-d01bffff *-display:1 UNCLAIMED description: Display controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 02 width: 32 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:40000000-4007ffff Have you got any ideas to get this solved? Thank you very much! Bonfire

  Read the article

• On-board HDMI Audio

  - by TrackStar

  I have tried searching for answers to this issue but have had no luck. My HDMI display is working but I have no audio from the HDMI .There is no option for HDMI under sound preferences hardware or output. Purging and re-installing pulse audio doesn't change anything. I am using the on-board HDMI port on my motherboard, I do not have a PCI graphics card installed. CPU: i7-3770 Mobo: Asus Sabertooth z77 Kernel: 2.6.39-3-bb03 running aplay -l returns ** List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 Seems as if the system doesn't even recognize the possibilty of HDMI audio output. Any ideas?

  Read the article

• Are Sony Vaio S series or T series laptops compatible with both windows 7 and Ubuntu 12.04 in dual-boot installation

  - by rini

  I am planning to buy a new laptop which is suitable for both Ubuntu 12.04 and windows 7 in dual boot configuration. I am looking for Sony Vaio two models with configurations: 13.3" S series Customizable laptop ( SVS131190S) 3rd gen Intel® Core™ i5-3210M processor (2.50GHz / 3.10GHz with Turbo Boost) Intel® HD Graphics 4000 4GB (4GB fixed onboard + 1 open slot) DDR3-1333Mhz 500GB (5400rpm) hard drive 13.3" T series Customizable ultrabook 3rd gen Intel® Core™ i7-3517U processor (1.90GHz / 3.00GHz with Turbo Boost) Intel® HD Graphics 4000 500GB (5400rpm) + 32GB MLC hybrid hard drive with RAID 0 6GB (4GB fixed onboard + 2GB removable) DDR3-1333Mhz Can anyone please tell me which laptop will function better for dual booting? Any help/comments are really appreciated.

  Read the article

• Sound issue in Lubuntu

  - by jvsa90

  I'm recently having a problem in my Lubuntu deskptop: sound through the speakers doesn't seem to work. The funny thing is: it works when I plug in my earphones. I've tried to unmute everything with pavucontrol and alsamixer, but everything seems to be OK. $ sudo aplay -l **** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: Intel [HDA Intel], Gerät 0: HDA Generic [HDA Generic] Sub-Geräte: 0/1 Sub-Gerät #0: subdevice #0 $ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 034a Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 58200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Can anyone guess what's happening? It has worked until recently and it definitely works in my Windows partition.

  Read the article

• Does Ubuntu 12.04 supports for B75 boards?

  - by rail02000

  I want to build a new computer with Intel G840 CPU and Gigabyte B75M-D3H motherboard and install Ubuntu (or Kubuntu) 12.04 64bit on it. However, I'm worried about whether the chip is too new and whether that Linux Kernel now has support for it. According to the article [Phoronix] Intel Core i7 3770K Ivy Bridge Linux Performance Review ,the Linux kernel is ready to work on the chip. Existing Intel Sandy Bridge motherboards/chipsets are compatible with Ivy Bridge processors, but earlier this month Intel launched the new Panther Point chipsets that are already compatible with Linux too: the B75, H77, Z75, Z77, HM75, HM76, UM77, and HM77. But I didn't find further information or cases about running Ubuntu on the chip. So,is it OK to run Ubuntu on the board? Do I need to upgrade the kernel to a newer version (3.4 or 3.5 etc.) to get the system more smoothly? Or should I choose boards with H61 chip? Thank for your response!

  Read the article

• Kubuntu not showing eth0

  - by Laurbert515

  I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

  Read the article

• Tried every possible method but couldn't enable compiz?

  - by 9kkmin

  a newbie, installed ubuntu 10.10 about a month ago,over the month i fixed everything from dad playback,to webcam,but couldn't enable compiz anayway,my card is blacklisted, i tried the SKIP_CHECKS=yes,method and even tried ghex editing,but of no avail,now all i get when i run compiz in the terminal is "segmentation fault",the specs of my laptop is intel core i3 2330,and intel hd graphics 3000,has anyone has been able to run compiz on intel hd graphics 3000?

  Read the article

• How do I "schedule an interrupt" on win32/intel architecture?

  - by bobobobo

  I'd like to figure out how to schedule a real ISR on normal win32 architecture (not Windows CE!) Is it possible?

  Read the article

• Is it already possible to enable Compiz on an i5 Thinkpad laptop?

  - by jmm

  Besides a number of other issues, I still cannot enable Compiz or any effects with Maverick on a Thinkpad X201. I understand this laptop is supported by Ubuntu, yet I have found a good number of posts reporting problems. I would like to know if they have been solved by now. Processor: 4x Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz Intel Corporation Core Processor Integrated Graphics Controller (rev 02) OpenGL Renderer Mesa DRI Intel(R) Ironlake Mobile GEM 20100330 DEVELOPMENT 2.6.35-27-generic #47-Ubuntu SMP Thanks for your help, jmm

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >