Search Results

Search found 4882 results on 196 pages for 'odd behaviour'.

Page 136/196 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• 10 GigE interfaces limits single connection throughput to 1 Gb on a ProCurve 4208vl

  - by wazoox

  The setup is as follow : 3 Linux servers with Intel CX4 10 GigE controllers and an X-Serve with a Myricom 10 GigE CX4 controller are connected to a ProCurve 4208vl switch, with a myriad of other machines connected through good ol' 1000 base-T. The interfaces are actually set up as 10 Gig, according to both the switch monitoring interface and the servers (ethtool, etc). However a single connection between two 10 GigE equipped machines through the switch is limited to exactly 1Gb. If I connect two of the 10 GigE machines directly with a CX4 cable, netperf reports the link bandwidth as 9000 Mb/s. NFS achieves about 550 MB/s transfers. But when I'm using the switch, the connection tops at 950 Mb/s through netperf and 110 MB/s with NFS. When I open several connections from 3 of the machines to the 4th, I get 350 MB/s of NFS transfer speed. So each individual 10 GigE ports actually can reach much more than 1 Gb, but individual connections are strictly limited to 1 Gb. Conclusion : the 10 GigE connection through the switch behaves exactly like a trunk of 10 1 Gb connections. That doesn't make any sense to me, unless HP planned these ports only for cascading switches or strictly for many-clients-to-single-server connection. Unfortunately this is NOT the envisioned setup, we need big throughput from machine to machine. Is this a not-so-known (or carefully hidden...) limitation of this type of switch? Should I suggest seppuku to the HP representative? Does anyone have any idea on how to enable a proper behaviour ? I upgraded for an hefty price from bonded 1Gb links to 10 GigE and see exactly ZERO gain! That's absolutely unacceptable.

  Read the article

• GtkView GtkSpell and myspell backend

  - by justadreamer

  Hi I have an IM client pidgin. It is launched under locale ru_RU.UTF-8 Then when I type messages in GtkView widget it highlights the misspelled words. However it uses a GtkSpell which uses enchant, which uses myspell backend (I provided it with symlink to openoffice dictionaries folder /usr/share/enchant/myspell -- /usr/share/myspell/dict). Now the problem is that whichever language I use - it still uses ru_RU language to select the dictionary, so all english text is being underlined as a misspelled text. When I switch locale to en_US and then launch pidgin under it - then all russian text becomes misspelled. I don't like this behaviour as I use pidgin to chat in both languages. Is there a way to somehow setup enchant/myspell so that it searches in both dictionaries en_US and ru_RU independent of the locale I launched pidgin (GtkView) in ? I have Debian lenny/5.0.1 distro. enchant version 1.5.0. /usr/share/enchant/enchant.ordering looks like this: *:myspell meaning that for all languages backend is myspell myspell dictionary.lst file looks like this: DICT en GB en_GB DICT en US en_US THES en US th_en_US_v2 THES en GB th_en_US_v2 THES ru RU th_ru_RU_v2 DICT ru RU ru_RU DICT uk UA uk DICT ru RU en_US

  Read the article

• add_header directives in location overwriting add_header directives in server

  - by user64204

  Using nginx 1.2.1 I am able to add multiple headers using add_header as follows: server { listen 80; server_name localhost; root /var/www; add_header Name1 Value1; <=== HERE add_header Name2 Value2; <=== HERE location / { echo "Nginx localhost site"; } } GET / HTTP/1.1 200 OK Name1: Value1 Name2: Value2 However I soon as I use the add_header directive inside location, the other add_header directives under server are ignored server { listen 80; server_name localhost; root /var/www; add_header Name1 Value1; <=== HERE add_header Name2 Value2; <=== HERE location / { add_header Name3 Value3; <=== HERE add_header Name4 Value4; <=== HERE echo "Nginx localhost site"; } } GET / HTTP/1.1 200 OK Name3: Value3 Name4: Value4 The documentation says that both server and location are valid context and doesn't state that using add_header in one prevents using it in the other. Q1: Do you know if this is a bug or the intended behaviour and why? Q2: Do you see other options to get this fixed than using the HttpHeadersMoreModule module?

  Read the article

• Apache in OS X not displaying localhost nor vhosts correctly

  - by Marcus

  I've encountered a really odd problem in my development environment, and I really can't make any sense of it. It started by a locally developed PHP-site refused to update any content I edited in a file – no text or nothing. So if the document was: <h2>Hello!</h2> and I edited it to <h2>What's wrong?!</h2> it still outputed <h2>Hello!</h2>. I thought is was some kind of cache:ing problem, but no "hard reloads" in the browser nor sudo apachectl -k restart sorted it out. Only a restart of my Mac did finally fix it. Now, a few days later even stranger issues are appearing. I have a LAMP-stack installed via Homebrew, in httpd-vhosts.conf I've set ~/Dev/ as my localhost, and I set up a <VirtualHost *80> for each project ("ServerName projectname.dev" for example). However, what ever files of folder I put in ~/Dev/ have stopped showing up on localhost, and new VirtualHost-directives doesn't work. Three projects + "docs" in the folder: But "localhost" only displays the two older projects...? So, as I've said – I've tried restarting Apache (without errors), clearing browser caches (tried in three browsers, Chrome, Safari and Firefox) and ever rebooting the Mac. Nothing. Any ideas? Running OS X 10.8.5 and Apache 2.2.24.

  Read the article

• hp DL380 G4 won't boot with disk plugged into front USB

  - by Kev

  We outgrew a few older external USB backup drives, and purchased WD My Passport 1 TB USB 3.0 drives to replace them. When they are plugged into the front of our G4, it will blink forever after the BIOS (which is current, BTW) and never boot, even though the USB disks are not "bootable" per se. Our old drives did not exhibit this behaviour (so I don't think it's this type of issue that I've read about other servers.) The old drives were USB 2.0, but this shouldn't make a difference, AFAICT--the specs say all of the G4's USB ports are the same, 2.0, anyway, so I'm not sure how one port would handle a USB 3.0 device better than another. If we plug the new drives in one of the back slots, it boots fine. What's the cause? My concern is that the front USB port, and possibly the motherboard, might be starting to die. (We are experiencing other strange issues with them, or were initially, like intermittent file permissions errors despite wide-open ACL on these local drives, but some serverfault users have me convinced they may be coincidental software/security related issues.)

  Read the article

• Running Visual Studio 2010 in a University Campus

  - by Woondows

  We have just installed Windows 7 Enterprise x64 in one of our computer labs being used by students for programming. However, when we installed Visual Studio 2010 Ultimate on the machines, we found that to even launch the application (devenv.exe), required the student to enter the administrator password (the usual UAC prompt). Of course, we could just turn off UAC, but that would defeat the purpose of having it in Windows 7. On the other hand, we cannot really give the students local administrator privilege, as we are concerned that they will do some malicious stuff on the computers. Previously when we used Windows XP Professional running Visual Studio 2005, we had no problems. Kindly advise if there's any workaround for this. EDIT: Thanks for the answer guys. Mayank, your links may work for Visual Studio .Net, but it doesn't seem to work for Visual Studio 2010. Ryan, Tieson, I'm intrigued that you guys managed to get it working easily. FYI I don't manage the Group Policies, but I can get them changed if necessary. Any particular GP that I should be looking at? Suggestions to how to troubleshoot further why UAC is being invoked? At least now I know for sure that this is not supposed to be the default behaviour for Visual Studio 2010 so I'm going to keep digging for a solution. Will try running Procmon and see if i can find something..

  Read the article

• smartctl short test doesn't seem to complete

  - by Cédric COPY

  I am working on project which involve automated HDD testing through smartctl. The station is working fine on most product, but I have two specific products that fail the smartctl test. Those two product are both WD product (WD2500BUDT series) Smartctl behaviour is quite strange, in fact the test is launched without any problem, i wait about 2min (test length), and when i check the smartctl, i have got no result at all. It's like I hadn't launched any test (no fail, no success in smartctl result). No error return on command, nothing in syslog, .. As i said before, the test is working for other product, thousands products worked well with this test. The main smartctl command used are : smarctl -t shortest /dev/sdX #Launch test smartctl -l selftest /dev/sdX #Look at test result I have tried to use: smartctl -s on /dev/sdX or smartctl -o on /dev/sdX But doesn't change anything. The system is using Debian 6.0, smartctl v5.40 (rev 3124) x86_64, HDD are plug through SATA to PCI controller. I have 4 HDD connected at a time. Well if anyone has some hints to give with this problem, because I have no idea how can i fix this. Thanks in advance. PS: Not sure if it was a serverfault topic, sorry if i was wrong!

  Read the article

• Redirect 301 fails with a path as destination

  - by Martijn Heemels

  I'm using a large number of Redirect 301's which are suddenly failing on a new webserver. We're in pre-production tests on the new webserver, prior to migrating the sites, but some sites are failing with 500 Internal Server Error. The content, both databases and files, are mirrored from the old to the new server, so we can test if all sites work properly. I traced this problem to mod_alias' Redirect statement, which is used from .htaccess to redirect visitors and search engines from old content to new pages. Apparently the Apache server requires the destination to be a full url, including protocol and hostname. Redirect 301 /directory/ /target/ # Not Valid Redirect 301 /main.html / # Not Valid Redirect 301 /directory/ http://www.example.com/target/ # Valid Redirect 301 /main.html http://www.example.com/ # Valid This contradicts the Apache documentation for Apache 2.2, which states: The new URL should be an absolute URL beginning with a scheme and hostname, but a URL-path beginning with a slash may also be used, in which case the scheme and hostname of the current server will be added. Of course I verified that we're using Apache 2.2 on both the old and the new server. The old server is a Gentoo box with Apache 2.2.11, while the new one is a RHEL 5 box with Apache 2.2.3. The workaround would be to change all paths to full URL's, or to convert the statements to mod_rewrite rules, but I'd prefer the documented behaviour. What are your experiences?

  Read the article

• Ping and crawling not working, site still resolving

  - by Andrew Alexander

  Ok, so we're trying to figure out why the site of one of our clients isn't being crawled by Google (we've ruled out robots.txt or meta tags) When we go to the site, either IP address or domain name, the site resolves, everything works. However, Google is getting a 302 redirect (which it apparently isn't following for crawling), and when we ping the address, it times out (note, the site is still resolving in the browser throughout all of this). The site is built in ASP.Net (I assume C#) and so my thoughts were that it was an errant redirect rule, or some other sort of server side issue. We also thought that it might be due to incorrect domain pointing (but if we try to ping the IP, it doesn't work, so that sorta rules that out). We're really not sure what is causing all of these errors, or even if they have one single source. Anyone have any ideas what could be going on? Do you need any more information? To boil it down in a TL; dr: * Site resolving in browser, both IP and domain name. No problems here. * Site not being crawled by Google (gets a 302 it doesn't seem to follow) - it is not due to robots.txt or meta tags * Ping is not working for the IP address. This is very odd, because again, the IP address seems to work fine in the browser. * Our thoughts are either redirect rule issue, domain pointing issue, or possibly some errant code - or some combination of the three

  Read the article

• Connect to Apache times out randomly

  - by Amadan

  We are trying to set up an Apache server on a remote machine, but we experience strange behaviour. Checking with telnet remote.machine 80, one of these things happen randomly: Connect and serve content normally (no delay) Connect after a long pause Connect normally, then time out without response Timeout on connect Once connected, the request seems to be processed normally. These things do not occur if I connect from that machine directly to localhost 80. The Apache is dedicated, as is the server it runs on (runs only this one application, no-one else is using it for anything else). I am not an administrator of the remote site, and I do not know the network architecture over there, but apparently it's firewalled: (HTTP port is open, SSH port is IP-restricted, most others are closed). If there was any one pattern, I might have some ideas, but this variety of symptoms baffles me. Any ideas as to what could be causing this? Apache is 2.2; Server version is: Linux version 2.6.9-22.ELsmp ([email protected]) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 18:32:14 EDT 2005

  Read the article

• PHP Causing Segmentation Fault & Apache Blank Response

  - by Joe

  I recently updated a Debian Lenny server to php 5.3,5 using the dotdeb source. Soon after doing so certain (but not all) sites on the server stopped responding to requests. A blank response would be returned - no headers, no content, nothing. I found this related question on stackoverflow which seems to describe something similar and used the same code the user had in their answer to see if I could replicate the issue: <?php class A { public function __construct() { new B; } } class B { public function __construct() { new A; } } new A; print 'Loaded Class A'; ?> This triggered the problem - the page returned absolutely nothing despite the original question stating this was fixed in PHP 5.5.0. No CPU block as you'd expect, no wait, just an almost instant zero response. I then ran this same code from the cli (php -f test.php) and the only output I got was 'Segmentation fault'. Tailing the kernel log I've spotted: Feb 16 07:04:06 creature kernel: [192203.269037] php[17710] general protection ip:76ef37 sp:7fff155e9bb0 error:0 in php5[400000+870000] Feb 16 08:57:31 creature kernel: [199639.699854] apache2[31136]: segfault at 7fff13a84fe0 ip 7f730514ea40 sp 7fff13a85008 error 6 in libphp5.so[7f7304ce8000+915000] All extremely odd and I'm not sure what it's pointing to/what I should do to debug this further. As I said some sites work but code such as the above definitely trigger it. Not that the sites I want to server have code like that - it's just an example. Any help is much appreciated!

  Read the article

• mkfs Operation Takes Very Long on Linux Software Raid 5

  - by Elmar Weber

  I've set-up a Linux software raid level 5 consisting of 4 * 2 TB disks. The disk array was created with a 64k stripe size and no other configuration parameters. After the initial rebuild I tried to create a filesystem and this step takes very long (about half an hour or more). I tried to create an xfs and ext3 filesystem, both took a long time, with mkfs.ext3 I observed the following behaviour, which might be helpful: writing inode tables runs fast until it reaches 1053 (~ 1 second), then it writes about 50, waits for two seconds, then the next 50 are written (according to the console display) when I try to cancel the operation with Control+C it hangs for half a minute before it is really canceled The performance of the disks individually is very good, I've run bonnie++ on each one separately with write / read values of around 95 / 110MB/s. Even when I run bonnie++ on every drive in parallel the values are only reduced by about 10 MB. So I'm excluding hardware / I/O scheduling in general as a problem source. I tried different configuration parameters for stripe_cache_size and readahead size without success, but I don't think they are that relevant for the file system creation operation. The server details: Linux server 2.6.35-27-generic #48-Ubuntu SMP x86_64 GNU/Linux mdadm - v2.6.7.1 Does anyone has a suggestion on how to further debug this?

  Read the article

• Is my OCZ SSD aligned correctly? (Linux)

  - by Barney Gumble

  I have an OCZ Agility 2 SSD with 40 GB of space. I use it as a system drive in Debian Linux (Squeeze) and in my opinion it's really fast. But I've read a lot on aligning partitions and file systems... And I'm not sure if I succeeded in aligning the partitions correctly. Maybe the SSD could be even faster?? ;-) I use ext4 and here is the output of fdisk -cul: Disk /dev/sda: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders, total 78161328 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: [...] Device Boot Start End Blocks Id System /dev/sda1 * 2048 73242623 36620288 83 Linux /dev/sda2 73244670 78159871 2457601 5 Extended /dev/sda5 73244672 78159871 2457600 82 Linux swap / Solaris My partitions were created just by the Debian Squeeze setup assistant. So I didn't care about the details of partitioning. But now I think maybe the installer didn't align it correctly? Actually, 2048 looks good to me (better than odd values like 63 or something like that) but I've no idea... ;-) Help plz! According to some "SSD Alignment Calculator" I found on the web, the OCZ SSDs have a NAND Erase Block Size of 512kB and their NAND Page Size is 4kB. 2048 is divisible by 4 and 512. So are the partitions aligned correctly?

  Read the article

• SharePoint 2010 Enterprise wiki - [New page] missing

  - by icelava

  I am trying to ramp up knowledge on SharePoint deployment and usage (never did before), due to a direction to use SharePoint 2010 as a repository platform (wiki format) for our customer's infrastructure documentation. In my test virtual server, a new site of Enterprise wiki template was setup. Went into Site Actions Manage Site Features to activate Wiki Page Home Page. The default sub-web then went from /Pages to /SitePages and looks like the default Team template. The odd thing is the Site Actions is missing the New Page option. My colleague does not understand why this is the case, as it ought to be there. The original /Pages sub-web does have the option. What conditions are in play that influences the appearance of that option? UPDATE Another phenomenon observed is in the Site Actions View All Site Content view, the wiki document libraries listed in the grid will have their hyperlink (e.g. "Site Pages") lead straight to the direct default page. It would not show its own table listing of pages under that document library, unlike the original Pages document library, which expectedly show up as a listing. I wonder if this hints to any problems.

  Read the article

• Self-connecting printers

  - by Martin Cerny

  Hello, I work as an administrator in a small company using XP Professional on all computers and two servers with Win 2003 Server. Recently a very unusual problam occured one of the computers keeps connecting to all the printers on the network it doesn't matter if it's an administrator or Domain User as soon as somebody logs in the commputer connects all the printers. The printers are either installed on local computers or on the server and shared. There is no log-on script connecting the printers, I install them manualy and none of the other computers shows such behaviour. We have a printer which is installed on two computers and both of them share it (I'm moving it to Server from a small PC which shared it up to now, but some computers still use the old connection), meaning this specific computer connects to one of the printer two times and it can't use either of the connections. How to prevent this self-connecting to all printers (none of the other computers has this problem). If I delte them from the "Printers" folder everything works fine untill I reconnect and the Folder is once again full of all the printers we have. I solved the smaller problem, computer is now capable of printing on all of the printers (it seems there have been some registry issues), after cleaning the registry and reinstalling the printer it seems to work just fine. But the second thing prevails, the computer connects to all the printers in the network (when I remove one/multiple it is reconnected right after the next log-in by any user).

  Read the article

• Upstart can't determine my process' pid

  - by sirlark

  I'm writing an upstart script for a small service I've written for my colleagues. My upstart job can start the service, but when it does it only outputs queryqueue start/running; note the lack of a pid as given for other services. #/etc/init/queryqueue.conf description "Query Queue Daemon" author "---" start on started mysql stop on stopping mysql expect fork env DEFAULTFILE=/etc/default/queryqueue umask 007 kill timeout 30 pre-start script #if [ -f "$DEFAULTFILE" ]; then # . "$DEFAULTFILE" #fi [ ! -f /var/run/queryqueue.sock ] || rm -rf /var/run/queryqueue.sock #exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script script #Originally this stanza didn't exist at all if [ -f "$DEFAULTFILE" ]; then . "$DEFAULTFILE" fi exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script post-start script for i in `seq 1 5` ; do [ -S /var/run/queryqueue.sock ] && exit 0 sleep 1 done exit 1 end script The service in question is a python script, which when run without error, forks using the code below right after checking command line options and basic environmental sanity, so I tell upstart to expect fork. pid = os.fork() if pid != 0: sys.exit(0) The script is executable, and has a python shebang. I can send the TERM signal to the process manually, and it quits gracefully. But running stop queryqueue claims queryqueue stop/waiting but the process is still alive and well. Also, it's logs indicate it never received the kill signal. I'm guessing this is because upstart doesn't know which pid it has. I've also tried expect daemon and leaving the expect clause out entirely, but there's no change in behaviour. How can I get upstart to determine the pid of the exec'd process

  Read the article

• How to fix IE starting when I try to start Opera?

  - by Scott Leis

  I have a problem that started today, where trying to run any of the 3 versions of Opera I have installed causes Internet Explorer to start instead. The Opera versions I have installed are 9.64, 10.10, and 10.63. My OS is Windows Vista with the latest critical/important updates. The behaviour is the same regardless of whether I double-click a shortcut to Opera, double-click on Opera.exe in one of the install directories, or run Opera.exe with the full path from Start-Run. The only work-around I've found is to right-click Opera.exe or a shortcut, and click "Run as administrator". This starts Opera, and it appears to work normally. Opera seems to be the only program so affected. I've checked Firefox and a few other (non-browser) programs, and they work normally. When IE starts instead of Opera, there are always two instances of iexplore.exe started, and they both crash before I can do anything else. IE also crashes if I try to start it from its own shortcut, but I don't know if that only started today, since I hadn't used IE for a few weeks. Does anyone know what might cause this and how to fix it? It's possible my PC has a virus, but BitDefender (for which I have automatic updates enabled) hasn't detected anything.

  Read the article

• GUI interfaces to ATI card behave weirdly out of the box and after updates.

  - by jdk

  My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

  Read the article

• IIS7 ASP.NET application - 2 identical apps in 2 identical app pools, 1 is responsive and 1 is not

  - by Ben

  I have an ASP.NET (v4.0) web app that is installed in a virtual directory (as an application) and is hosted in it's own app pool. This is repeated for each instance of the app (i.e. per customer). The app pools are integrated (not classic) mode and LoadUserProfile is set to true. Otherwise, default settings. Each instance currently has it's own copy of the code/config, and it's own data folder (basic file read/writes). 1 instance of this app runs well (operation used for comparison takes ~4 seconds). Every other instance runs slowly (from 10-25 seconds for the same operation). If I move the slower instance to the "fastest" app pool that instance springs to life. If I move the faster instance into the slower app pool that instance slows to a crawl. The app pools were created in the same way initially - manually. I later used the powershell copy routine to ensure an exact copy of the faster app pool and still the same behaviour. Comparing the apppool.config files shows they are identical barring the virtual directory assignments. There are no shared resources that are being blocked, so far as I can tell, and I tested that by shutting down the performant app pool and restarting... slow is still slow, and then when I restart that app pool (so it's loaded last) it's still faster...

  Read the article

• Copy past speed very slow for a large number of tiny files on Windows but not on linux

  - by Arno2501

  I've got this folder which contains 15'000 of tiny images (around 400 bytes each). If I copy past this folder on my laptop (Windows 7, i7 latest gen, superfast ssd) it takes about 30 seconds (yes for 7 megs !!!) the average transfer rate is 400 KBytes / second which is so slow. I mean my usual transfer rate is more like hundreds of MBytes per second !!! I get the same problem on my servers (Windows 2003, 2008 /r2) and on every Windows box that I could get my hands on. On the other hand if I do the same on a linux box (debian base, Ext3 FS) (which runs on the same SAN than all the windows servers I've tested) It's nearly instantaneous !!! I'm pretty sure the size / number of the files may stress such filesystem more than another but such differences !? Why is that ? Why is it so slow on the windows boxes (more that 30 sec for 7 MB) and so fast on the linux ones (one sec or so) (I mean this was not a hardlink that I've created it was a true copy). Is it a normal behaviour or something unusual ?

  Read the article

• User http does not have write permissions directory?

  - by dwieeb

  I have a bit of an odd set up, I think. I have groups for each domain my server hosts, and I add the user http to each domain group along with the users that should have access to the groups' domains. In my php script running from a directory 'public_html', I try creating a file: <?php $output = ""; print exec('touch test 2>&1', $output); But I get touch: cannot touch `test': Permission denied and the file is not created. But here, clearly stated, the group has all permissions on the directory: drwxrwxr-x 5 dwieeb example.com 1024 Feb 4 05:19 public_html And here are the permissions on the php file in public_html that is trying to use the exec function: -rw-rw-r-- 1 dwieeb example.com 59 Feb 4 05:19 test.php How is this possible if http is part of the example.com group (as seen from a cat on /etc/group) and the directory has full permissions for the group? ... example.com:x:1000:dwieeb,http I'm stumped. EDIT (since apparently I'm not cool enough to answer my own questions yet): Ah, I found the problem. Yes, I restarted Nginx, but the php-fpm daemon must be restarted as well when http is added to the group for my domain. On Arch Linux: rc.d restart php-fpm

  Read the article

• How to send from my Z88 to my PC

  - by Bevan

  I've got a Cambridge Z88 that I want to get working with my PC. Around 6 years ago - in 2004 - I made heavy use of my Z88 to do a whole bunch of writing on the train while commuting to and from work. The Z88 is solid state, lightweight and has a full size silent keyboard, so it works very well as a writing instrument. I still have the serial cable I soldered up back then and used successfully in 2004. It has these connections: Z88 9 pin ----- ------- 2 TxD ------> RxD 2 3 RxD <------ TxD 3 7 GND <-----> GND 5 4 RTS ------> CTS 8 5 CTS <-+ RTS 7 8 DCD <-+---- DTR 4 9 DTR ----+-> DCD 1 +-> DSR 6 Unfortunately, I haven't been able to find my notes from 2004 that describe how I got it to work back then. I've spent several hours trying to Google a result, but to no avail. I'm pretty sure the cable is fine - after all, it's what I used successfully six years ago, and I've checked it out with a multimeter - so I'm focusing on the PC end of things, which is where I'd like some assistance. Q1: In my recent attempts, I've been using both Hyperterminal (as built into Windows XP) and the command line (copy com2: con:), but with no success. What's a good (better!) serial communications application to use? Is there one that allows me to see as deep as the signalling that's occurring on the wire? Q2: If you have a Z88 that works correctly with your PC, what software do you use on the PC end, and what's the pinout of your cable? I'm pretty sure that the Z88 itself is working properly: When using the built in Import/Export tool to send a file, I see different behaviour when my serial cable is connected compared to disconnected. When disconnected, the transmission appears to work, with a progress meter counting up and then finishing; when connected, nothing happens 'cept a timeout if I wait long enough.

  Read the article

• Building an Email server for mass emails

  - by EGHDK

  I recently started doing IT odd jobs for a company. The company has a pretty decent sized mail list that costs them over $3000 per month to send out email from. The company is set on creating their own email server so that it can just run and send emails to the client lists. They only send out emails roughly once a month. Has anyone had experience with this? This wouldn't be an email server I guess (as it doesn't need to handle incoming messages) It just has to be able to send around 200,000 emails, once a month. What would be the best way to go about this? Services online like MailChimp have proved to be too pricey. It's not an ad that is being sent out, it's more of a monthly newsletter, so we don't need any crazy software for ROI or anything crazy like that. If I could fit 200,000 people in GMAIL, I'd do it, but I don't think I can (heh... maybe I should try).

  Read the article

• Printing from Firefox on different printers and setting the page details beforehand

  - by user1162541

  I´ve got an odd problem and I have not been able to fix this. I have a computer which is connected to two printers. One is a receipt printer (EPSON TM-U220), and the other one is an impact printer (Epson LX-300+). From Firefox, I need to print on both printers at different moments. So first I print on the receipt printer, then on the impact printer, etc. However, whenever I first print on the receipt printer, and then go back to the impact printer, the printout is only the width of the page of the receipt printer. That is, the page does not come out properly, just the left part of the page is used for printing and the right part is completely empty, as if I am just printing on the small receipt paper. And there is no way I can tell Firefox that I am printing on this larger printer. The second print on the impact printer goes fine. Firefox now knows it is printing on the impact printer, and it comes out properly on the full page width. But every first print on the impact printer is using the wrong paper size. How can I fix this? When I go to PAGE PREVIEW I can not set the printer UNTIL I actually print the page. If I go to PRINT PREVIEW CONFIGURE PAGE, I can not set the printer I will be using. I can only do so if I go to PRINT PREVIEW PRINT (here is the dropdown box to set the printer). But I can only set the printer and then click PRINT, or CANCEL. If I click PRINT, then the computer remembers the setting but that page will come our wrong, and when I click cancel it simply does not remember the printer I just set.

  Read the article

• VMware "boot screen" - add info like contact, phone number, etc.?

  - by TheCleaner

  I've tried searching Google and VMware's KB but maybe I'm not typing the right search criteria...only finding ways to fix problems with booting or screen issues. On the default boot screen of a host it looks similar to this picture from GIS: I'm curious if it is possible somehow to make it look like this instead (adding custom details): I know for the most part the info is "useless" since it is administered remotely, etc. But when I deploy standalone hosts to branch offices, it'd be nice for them to see this type of info on the boot screen. I may also include the VMs hosted on it (again on standalone hosts). Normal monitoring, etc. will be done remotely. This is strictly for odd times when the branch contact may say "the electricians are saying they need to turn off this circuit but I have no idea who to call in IT to tell them this box needs to be shut down" or similar. Anyone who has dealt with small branch offices can tell you that if it isn't labeled they easily forget what it is for and will simply say after the incident "I didn't know what it was or who to call." Possible?

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >