Search Results

Search found 4463 results on 179 pages for 'review board'.

Page 136/179 | < Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >

• K8NDRE motherboard in server fails to complete BIOS load with error 0078

  - by John

  K8NDRE motherboard with 4 sata drives, was running fine. Drives had raid-0 and raid-1 partitions, using mdadm. The onboard raid is disabled. Upon reformatting the drives, setting a new partition structure and new raid partitions, the bios fails to finish loading, with 0078 in the bottom right corner. Tried using completely new set of drives, and bios worked fine. Able to boot from a usb, format the drives, partition them, start raid, and then installed os. Reboot and received the same error from the bios, 0078. Works fine if I unplug the sata drives. Any thoughts? Physical inspection reveals no damage cables, connectors, or capacitors. Server was running happily for over a year, and this is the first problem it has had. Per Michael Hampton's answer: The drives, unjumpered and supporting sata III worked fine originally, and worked fine for formatting and having new partitions and raid installed on them. I did try jumpering one, with no change. If I put a brand new unformatted drive in, the motherboard recognizes it and I can proceed with formatting and installing. When I reboot, I get the 0078. I have 4 sata cables-the board supports 4 drives, so I tried each and no change. I am close to calling the motherboard done.

  Read the article

• Many different BSOD

  - by Exa

  I'm experiencing multiple bluescreens for a couple of months now. Their error code is as diverse as their time of occurence... Sometimes it happens during gaming, sometimes when watching videos, sometimes when the computer is idle. These are the bluescreens I see most often: PAGE_FAULT_IN_NONPAGED_AREA KMODE_EXCEPTION_NOT_HANDLED IRQL_NOT_LESS_OR_EQUAL SYSTEM_SERVICE_EXCEPTION SYSTEM_THREAD_EXCEPTION INTERRUPT_EXCEPTION_NOT_HANDLED DRIVER_IRQL_NOT_LESS_OR_EQUAL DRIVER_OVERRAN_STACK_BUFFER Responsible drivers (according to the memory dumps): hal.dll tcpip.sys dxgmms1.sys ndis.sys mouhid.sys atikmdag.sys dump_atapi.sys and of course: ntoskrnl.exe My first thought was a driver incompatibility because I am using Windows 8 and some of the bluescreens seem to come from driver issues. All drivers are up to date. I'm afraid that my memory is broken or the mainboard or both. I used the windows integrated memtest which didn't find any errors. Memtest86 found some errors. Does it make sense to buy new memory? Couldn't it be a problem of the board as well? I also read that my memory could run at a too low voltage. But it's set to 1.5V as recommended. Another guess would be to set the memory's latencies manually, but how do I know which ones to try? Here is a screenshot of bluescreenview showing the latest bluescreens. Maybe someone has faced the same behavior before and found a solution. Any ideas or suggestions? Current setup on which the bluescreens occur. Windows 8 RTM (6.2.9200) Asrock 970 Extreme4 AMD FX-8150 ATI Radeon HD5850 16 GB RAM (DDR3-1800) Latest drivers for all devices

  Read the article

• External component has thrown an exception. ASP.NET ASPX PAGE POST

  - by Brandon

  I have an aspx page that communicates with a webservice I have. It connects to an SQL Server database on my virtual dedicated server. With just a little usage, I get this error External component has thrown an exception. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.SEHException: External component has thrown an exception. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [SEHException (0x80004005): External component has thrown an exception.] Luxand.FSDK.Initialize(String DataFilesPath) +0 WebService.onLoad() +70 WebService..ctor() +91 facematch.btn_submit_Click(Object sender, EventArgs e) +218 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746

  Read the article

• What's a good solution for file-tagging in linux?

  - by julien

  I've been looking for a way to tag my files and search/filter them based on those tags. Here are my (updated) requirements : any file readable by the user can be tagged freely a user can search for files matching one or several tags files can be moved around without losing the previously associated tags the system could be backed up easily no dependencies on any desktop environment if any gui is involved, there must be a cli fallback I've been hoping for some basic filesystem & coreutils hackery to handle this, but I haven' thought about this hard enough yet. Meanwhile I'll review beagle and metatracker, which have been mentionned here, and see how they perform. Ok so beagle has huge gnome dependencies, and tracker is okish, but still has some dependencies I don't like... Been doing some more research, and the way to go could very well be extended file attributes. That's a native solution for most recent filesystems, but they aren't very well supported yet (most coreutils destroys them by default, cp for example needs the -a flag to preserve them). Would like to hear some thoughts on using them while I try my hand at some hacks myself, eventhough this might warrant a new question.

  Read the article

• Why is my new PC so slow at startup?

  - by rumtscho

  Bought a new PC this weekend, and it works really good. Only I have one big problem: startup time. Its BIOS needs 62 sec to load, then from Grub start to pw entering screen it's another 26 sec. I think this is a lot, because my old PC needs 34 sec for BIOS and another 8 sec to pw screen. After I enter the pw, the desktop is usable with practically no delay on both. The new PC is a core i7-930, running a Lucid Lynx 64 bit from a Intel Postville SSD (no internal HDs). The old PC is a Pentium 4 celeron (forgot the clock speed) running a Lucid Lynx 32 bit from an ATA 100 hard drive. Neither PC is overclocked. The new one has boot sequence 1.DVD ROM, 2.SSD (connected over SATA in AHCI mode), 3. removable drive. The old one boots from 1. DVD ROM, 2. HDD, 3. Floppy. Neither has a second OS installed. The new one has less software installed than the old one (I think), but the boot time difference was noticeable even before I made any installs. As far as I know, just the SSD should be enough to make a noticeable difference in boot time. I thought that having a good mainboard on the new PC as opposed to the basic office model on the old one would also mean a faster loading BIOS. If these assumptions are right, I guess I must have misconfigured something in the BIOS of the new PC. How should I configure it for a fast boot? It has an ASUS P6X58D board with an AMI BIOS, if you need the BIOS revision number I could post that too.

  Read the article

• Install multiport module on iptables

  - by tarteauxfraises

  I'am trying to install "fail2ban" on Cubidebian, a Debian port for Cubieboard (A raspberry like board). The following rule failed due to "-m multiport --dports ssh" options (It works, when i run manually the command without multiple options). $ iptables -I INPUT -p tcp -m multiport --dports ssh -j fail2ban-ssh" iptables: No chain/target/match by that name. When i make a cat on "/proc/net/ip_tables_matches", i see that multiport module is not loaded: $ cat /proc/net/ip_tables_matches u32 time string statistic state owner pkttype mac limit helper connmark mark ah icmp socket socket quota2 policy length iprange ttl hashlimit ecn udplite udp tcp The result of iptables -L -n -v command : $ iptables -L -n -v Chain INPUT (policy ACCEPT 6 packets, 456 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 3 packets, 396 bytes) pkts bytes target prot opt in out source destination Chain fail2ban-apache (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain fail2ban-ssh (0 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 What can i do to compile or to enable the multiport module? Thanks in advance for your help

  Read the article

• Computer wont start, just blinks on and off

  - by Ryan

  This is really strange. I had a comp that was working fine for over a year, then suddenly it started to shut off, it got so bad that I press the power button and in around 30 secs while booting windows it would shut off, then 20 secs... then 10 secs, then it refused to start all together. So I bought a new PSU (850w Thermaltake, the old one was 550w corsair) thinking that was the problem, I fitted the new PSU now and its the same thing, I press the power button and my fans start for a split second (they have led lights on them, so the lights come on) and then everything goes off again. I thought maybe it was my power button that was loose on my comp, luckily I had another chassis near by so I disconnected the powerSW from the old one and put ran the powerSW from the new chassis, press the power on the new chassis and same thing, it blinks for a split second and off again. Double checked connections from the PSU to the cpu power as well as board mobo power, its tight. It's pretty unlikely both the PSUs have the same exact problem so am lost... Suggestions?

  Read the article

• Does anyone know where I could find a 2 input USB voltage meter?

  - by John O

  What we really need is a tiny UPS, of sorts. We'll be hooking up a solar cell and a battery to a single board computer. Currently, that SBC is a custom Pic32 device, and it does it's own UPS and voltage monitoring duties. I've been tasked with trying to replicate all of its features with off the shelf products... and for the most part I've succeeded. But I don't currently have any way to switch between two sources of juice, or monitor when they're getting low. These guys have something: http://www.mini-box.com/picoUPS-100-12V-DC-micro-UPS-system-battery-backup-system I really like it, the price is well within the budget. We might even work it in though it does 12V and I'll probably be using 5V... there are enough engineers on hand to figure out something. But I'd still have no idea what the voltage was for the PV or battery. I was hoping that there was some simple little USB multimeter thing that I could use to monitor this with, but I can't seem to come up with anything. I've found all sorts of cool hardware, but nothing that will help us. Does anyone know of anything?

  Read the article

• USB 3.0 ports backwards compatibility problems with 2.0 devices?

  - by AaronLS

  I see some info on the net that suggest that I should be able to get my USB 2.0 devices to work in 3.0 ports. I only have two 2.0 ports on my new computer, and six 3.0 ports. I have installed drives. There's two different drivers, I guess some of the ports are supported by the intel board and some supported by some other chipset on the motherboard. I however have yet to get any of the 3.0 ports to work, and my brother had had the same issue with his devices not working in 3.0 ports on his computer. So I am beginning to wonder if the backwards compatibility isn't reliable for some reason. Maybe manufacturers opting not to implement 2.0 support on the 3.0 ports. I understand that physically the wiring is there, but that is only half the story. Beyond my brother's and my own computers (different motherboards/everything), I have yet to see a 2.0 device work in a 3.0 port. Is there any reason for this apparent device incompatibility? I.e. looking for responses that would indicate what areas to explore for issues or if there is any known cases of manufacturers deviating from spec in hardware or drivers. I am aware it's "supposed" to work :) Update: Does this have any relation to "USB Legacy Support" options in the BIOS? There several options combinations of options with "USB Legacy Support" and "USB 3.0 Legacy Support" and the description for these is a bit confusing, sounds like a bad translation.

  Read the article

• Eclipse CDT wont recognize standard library

  - by Mike G

  I work primarily on my desktop, but I started working on my mac laptop and noticed a problem with eclipse CDT. The standard library was underlined yellow and cout wouldn't work (It wouldn't recognize/find it). I tried restarting the program and that didn't work. I then tried to see if xcode would work, found that the version of xcode was too old, and updated xcode. Eclipse still didn't work, but xcode did. I tried re-installing eclipse to the new version and re-installing cdt. It still wouldn't work. Restarting my computer wont work either. I'm not sure if this helps (or even matters/applies) but when I type g++ --version into terminal, it doesn't work. (I don't know if that matters but some tutorial told me to do that to check if the compiler was working). So, in review, I have: Re-installed eclipse Restarted my computer Re-installed xcode (which I think has all the compilers eclipse uses.) Updated Eclipse Typed g++ --version to test compiler.

  Read the article

• AMD processors witn graphics card bundled [closed]

  - by shybovycha

  Sorry for posting this question here - just don't know to which StackExchange website i should be writing. I've heard AMD created processors with video card bundled. So now these processors should work as fast as just usual processors with discrete video card but AMD's ones should use less power and spread less warm. Some googling around gave me the result like "AMD processors of A-series". They were mentioned to be build using that technology i described above. But on the other hand, we have a small rate of publishing and not-very-good quality of AMD drivers. I am a game-developer and web-developer so i need a powerful processor and graphics card and a lot of RAM on board (to make it possible to create a sample Grails application, for example or to create some 3D models in Maya/Cinema4D, for instance). Still i want my battery to be a long-living one, so power usage is a bit critical for me. So, my questions are: are there any processor building technology like i've described and which series they are (if they exist)? which processor shall fit the laptop the best: AMD one or i5/i7 on with nVidia graphics card for the purposes mentioned above?

  Read the article

• Ping results "echo'd" out to a text file on Windows XP machine has unusual character rather than the outcome

  - by Richard Rice

  Here is the situation. I have a Windows XP machine that I would like to ping another machine and send the output to a text file for review at a later date. This is quite a standard question with several answers on this website and others. The issue I have is that when reviewing the txt file afterwards, the outcome of the ping appears as a strange character. A screenshot of the text file output can be found at the following link. Please note its the first 8 ping outputs that have a strange character. The %%B was me hoping that would output what I wanted! (Cannot upload image to any hosting websites because the company I work for seems to be afraid of them ....) Here is the code I'm using: @echo off For /f "tokens=1-2 delims=/:" %%b in ("%TIME%") do (set mytime=%%a%%b) PING 1.1.1.1 -n 1 -w 1000 >NUL for /f "tokens=*" %%A in ('ping 192.168.5.2 -w 10 -n 1') do (echo %date% %time% %%A >> C:\Temp\Ping_Checks\GarrickSide.txt && GOTO Ping ) :Ping PING 1.1.1.1 -n 1 -w 1000 >NUL for /f "tokens=* skip=2" %%A in ('ping 192.168.5.2 -w 10 -n 1') do (echo %date% %time% %%A >> C:\Temp\Ping_Checks\GarrickSide.txt && GOTO Ping ) This code works fine on a Windows 7 machine, but not on a Windows XP machine. It appears that the echo command isn't outputting the right data, but I don't understand this enough to correct it. Can anyone spot where I'm going wrong?

  Read the article

• Why am I getting a Sharepoint error on a simple "hello world" web page?

  - by Fetchez la vache

  I've been granted admin access to an internal IIS server on which I need to set up a web site. Before doing anything technical I wanted to ensure that I could access the server, but when attempting to access a simple page (that does not refer to Sharepoint) at http://localhost/index.html when logged onto the server directly, I am getting Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load file or assembly 'Microsoft.SharePoint' or one of its dependencies. The system cannot find the file specified. Source Error: Line 1: <%@ Assembly Name="Microsoft.SharePoint"%><%@ Application Language="C#" Inherits="Microsoft.SharePoint.ApplicationRuntime.SPHttpApplication" %> Source File: /global.asax Line: 1 Assembly Load Trace: The following information can be helpful to determine why the assembly 'Microsoft.SharePoint' could not be loaded. WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. -------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:2.0.50727.5456; ASP.NET Version:2.0.50727.5456 To be quite honest I know zip about Sharepoint, so why am I getting a sharepoint error on a basic "hello world" html page? Cheers :) Update: I've since supposedly uninstalled Sharepoint, but am still getting this error. Any ideas welcome!

  Read the article

• Laptop does not charge old or new battery with Old and New AC adapters.

  - by Jeff

  My Sager computer has been having a strange issue with the charging. For a long time it would be working perfectly as long as I was active on it. After I'd leave idle for a while it would suddenly decide it didn't want to use AC power anymore and would just discharge the battery until it shutdown because of low battery levels. Was not a huge deal to me since I just sent it to standby when done with it and it worked fine. Recently, however, it would not detect AC power while the battery was in. It ran from the battery just fine but until you powered it down, unplugged the battery, then plugged in the AC adapter it would not be on AC. In addition if I plug the battery back in after it's on AC power, it will see it but the battery won't charge though it can still discharge it. This is OS independent. I tried both a replacement battery and a replacement AC adapter. Neither solved my issue. I'm fairly comfortable opening and servicing a laptop but I don't know where to start. I'd like to avoid replacing my system board if possible. Any Ideas?

  Read the article

• Cannot Add Particular Word to Dictionary

  - by WCWedin

  I am trying to add a particular word to my custom dictionary using Word 2007. (The word happens to be "deserialized".) When I right-click on the word and click Add to Dictionary, the red underline does not go away. When I use the Spelling & Grammar tool from the Review tab on the ribbon, it will stop on that word; clicking the Add to Dictionary button has no effect. Oddly, I am able to add other words to the custom dictionary without a problem. I recently added "deserializes", for instance. I have only encountered this problem with that one particular word. Does anyone know what might be wrong and how I might fix it? Clarifications My document and all its content is set to English (United States). My custom dictionary is set to apply to All Languages, which is the default value. "Serialize" is in the US English default dictionary, but "deserialize" and its various forms is not.

  Read the article

• Cisco 7206vxr cpu reducing

  - by naimson

  I have a 7206VXR (NPE-G2) . At the rate of 140 kpps i gain 80% of cpu . So i looking for ways how to reduce it? So i want to turn off netflow(but don't want to this,monitoring is highly important for me), but it will give me only 10-20% ? At this moment with 84kpps i have 58% sh processes cpu sorted give me this. PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 109 163534600 537236763 304 35.38% 32.83% 16.85% 0 IP Input 67 829396 52280 15864 0.15% 0.01% 0.00% 0 Per-minute Jobs 68 5542736 3053476 1815 0.15% 0.18% 0.16% 0 Per-Second Jobs 51 635852 1116315 569 0.07% 0.03% 0.02% 0 Net Background 329 120396 4607274 26 0.07% 0.00% 0.00% 0 EIGRP-IPv4 Hello 105 50508 95032488 0 0.07% 0.05% 0.05% 0 IPAM Manager 6 4068580 476916 8531 0.00% 0.07% 0.05% 0 Check heaps 7 7768 3634 2137 0.00% 0.00% 0.00% 0 Pool Manager 8 0 1 0 0.00% 0.00% 0.00% 0 DiscardQ Backgro 10 8 708 11 0.00% 0.00% 0.00% 0 WATCH_AFS 5 0 1 0 0.00% 0.00% 0.00% 0 RO Notify Timers 12 0 2 0 0.00% 0.00% 0.00% 0 ATM VC Auto Crea 9 0 2 0 0.00% 0.00% 0.00% 0 Timers 11 0 2 0 0.00% 0.00% 0.00% 0 ATM AutoVC Perio 13 296 610532 0 0.00% 0.00% 0.00% 0 IPC Event Notifi 16 0 1 0 0.00% 0.00% 0.00% 0 IPC Zone Manager 17 3584 2980311 1 0.00% 0.00% 0.00% 0 IPC Periodic Tim 4 0 1 0 0.00% 0.00% 0.00% 0 EDDRI_MAIN 19 0 1 0 0.00% 0.00% 0.00% 0 IPC Process leve 20 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat Manager 21 96 174453 0 0.00% 0.00% 0.00% 0 IPC Check Queue 14 4 50890 0 0.00% 0.00% 0.00% 0 IPC Dynamic Cach 3 0 1 0 0.00% 0.00% 0.00% 0 cpf_process_tpQ 24 756 305371 2 0.00% 0.00% 0.00% 0 IPC Keep Alive M 25 2340 610561 3 0.00% 0.00% 0.00% 0 IPC Loadometer 22 0 1 0 0.00% 0.00% 0.00% 0 IPC Seat RX Cont 15 0 1 0 0.00% 0.00% 0.00% 0 IPC Session Serv 18 1620 2980310 0 0.00% 0.00% 0.00% 0 IPC Deferred Por 29 0 1 0 0.00% 0.00% 0.00% 0 Exception contro sh run(greped): http://pastie.org/5483194 Hardware: c7200p-adventerprisek9-mz.151-4.M1.bin Cisco 7206VXR (NPE-G2) processor (revision A) with 917504K/65536K bytes of memory. Processor board ID 2xxxxxxx MPC7448 CPU at 1666Mhz, Implementation 0, Rev 2.2 6 slot VXR midplane, Version 2.1

  Read the article

• Route all traffic of home network through VPN

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• Route all traffic of home network through VPN [migrated]

  - by user436118

  I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

  Read the article

• Why won't sql server express 2008 service restart after I enable TCP/IP Protocol?

  - by John

  Whenever I enable TCP/IP connections on my SQL Server Express 2008 database server running on Windows XP SP3, I cannot restart the service, it simply states "The request failed or did respond in a timely fashion". Any suggestions of what I may have configured incorrectly? [update] Here is the applicable part of the Error Log: MSSQL$SQLEXPRESS Server failed to list on 'any' 3060. Error: 0x2747. To proceed, notify you system administrator. MSSQL$SQLEXPRESS TDSSNIClient initialization failed with error 0x2747, status code 0xa. Reason: Unable to initialize the TCP/IP listener. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. MSSQL$SQLEXPRESS TDSSNIClient initialization failed with error 0x2747, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. MSSQL$SQLEXPRESS Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. MSSQL$SQLEXPRESS SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

  Read the article

• CentOS: AJAX/jQuery not working

  - by Australiya

  In a nutshell, I have an unmanaged VPS. At one time, it had Ubuntu 10.10 server on it, then I reinstalled it with CentOS 6 and updated it to CentOS 6.2. Now, the problem is, the AJAX/jQuery shoutbox has ceased working (I assume it uses one of the two to inject itself into a div and then refresh when new messages are posted, I'm not sure, I didn't write these), and the plug-board script now shows me a lime green blank page. No changes to the source codes have been made, and they are in the location they expect themselves to be. I have Apache2, MySQL 5, PHP 5, and I did install the php-xml libraries. What am I missing? It's gotta be server side because the scripts themselves are fine, if I move them to a different server they work just fine. I'm not getting any errors related to this in the error_log file. Thanks in advance! Edit: If you want, you can look at the plugboard at kazeshini.net/plugboard and there's an installation of the chatbox at silverlotus.kazeshini.net/yshout/example, I know nothing about scripts and debugging so better someone else looks at it than someone that doesn't know what they're looking for.

  Read the article

• Which would be more reliable for data archival - SD card or a generic USB thumbdrive?

  - by Visitor

  I've been thinking lately what should I preferably use for data storage and archival. I will say in advance that I do not use flash memory as the only storage media - I also keep my data on the hard drives and optical disks - flash memory is but one of the several backup solutions that duplicate each other. For the flash memory however I do have a choice - to use a generic USB thumbdrive or a SD card. Are there any indications that SD cards may be better and more reliable? From browsing people's review on the web I see that many complaints about USB sticks have to do with them completely failing, losing file system and stop being recognized by the OS. At the same time, most of the complaints for SD cards deal with just write speeds not holding up to the promise - failure reports are but a portions of those for the USB sticks. Are SD cards indeed more reliable? Am I also correct in my assumptions that SD cards use higher grade NAND chips than USB thumbdrives? At least, for class 10 cards, because the specification dictates the minimum performance and the manufacturers have to preselect better chips. While it is common for USB sticks to promise high speeds "up to XX MB/sec" but the reality is they very often deliver speeds 2-3 times less than promised. Do SD cards get better NAND chips and USB thumbdrives receive the discarded chips? Any thoughts would be appreciated.

  Read the article

• Git workflow for two tight-knit projects

  - by Pioul

  Two very similar projects I'm maintaining an online Markdown editor using Git as RCS (and accessorily made available on GitHub). From this web app, I've created a Chrome app: the code is the same, aside from some Chrome technicalities. I care about open sourcing these two projects. Still, the Chrome app's code being the same as the web app's except for some dull details, I've first chosen to (1) not publish the Chrome app on GitHub, and (2) not use Git to manage its code. Instead, I would manually review the web app's commits, then replicate the few changes in the Chrome app. … slightly drifting apart However, I've decided to add a feature to the Chrome app only. So, even though both codebases will remain broadly similar, they'll be diverging enough to make me reconsider the rationale behind my initial decision to not version control nor share the Chrome app's source code. Since I'm now willing to use Git to version control both apps, and that I want to share both of them on GitHub, how should I go about it? Should I use two different repositories, or one repo with two long-running branches? What would be the pros and cons of each approach in that context? What would be the easiest/fastest way to regularly "import" commits from the web app to the Chrome app, since the web app is going to remain the master branch? Is cherry-picking the only solution?

  Read the article

• Help with Backup Scheme for B.E 12.5

  - by Jemartin

  I'm in process of implementing a new backup scheme. I would say that I'm kind of new to it. So here my question. I'm currently using Backup Exec 12.5 on Windows Server 2008 w/Hyper-V, and IBM Adic Scalar 24. I currently backup our mail server, SQL DB, Board Server Linux Red Hat, Ftp, etc. To a Near-line which is local on our SAN I have the daily's go there as well as full. I would like to start weekly full to tape on a Saturday it takes about 2-3 days to complete the entire full to tape due to backing up from our Co-Lo as well. I have read up on the Father/son rotation but here's my issue with that I dont use tapes everyday only on the weekly full to tape will I be using them. So if there is 4 weeks in a month would I rotate in this order ( Month June WK1 =7tapes , June WK2=7 tapes, June WK3=7tapes June Wk4=7tapes with WK4 being the last tape for the month of June I would use that as a Month tape. For the month of July Wk1= June's WK1 tapes, July WK2= June's WK2 tapes July WK4 = Junes Wk4 tape for a month or would I use a set of new tapes for the last week in July. All tapes are being taking off site as well.

  Read the article

• System requirements for running windows 8 (basic office use) in virtualbox (ubuntu as host os)

  - by Tor Thommesen

  I want to run windows 8 as a guest os with virtualbox on some thinkpad (haven't bought one yet) running Ubuntu 12.04. Apart from virtualizing windows 8 (mostly just for use with the office suite app) my needs are very modest, I don't need much more than emacs and a browser. What I'd like to know is what kind of specs will be necessary to run windows 8 well as a vm, using the office apps. It would be a shame to waste money on overpowered hardware. Are there any official guidelines from oracle or windows on this? Would this lenovo x220, for example, be sufficiently strong? The specs below were taken from this review. Intel Core i5-2520M dual-core processor (2.5GHz, 3MB cache, 3.2GHz Turbo frequency) Windows 7 Professional (64-bit) 12.5-inch Premium HD (1366 x 768) LED Backlit Display (IPS) Intel Integrated HD Graphics 4GB DDR3 (1333MHz) 320GB Hitachi Travelstar hard drive (Z7K320) Intel Centrino Advanced-N 6205 (Taylor Peak) 2x2 AGN wireless card Intel 82579LM Gigabit Ethernet 720p High Definition webcam Fingerprint reader 6-cell battery (63Wh) and optional slice battery (65Wh) Dimensions: 12 (L) x 8.2 (W) x 0.5-1.5 (H) inches with 6-cell battery Weight: 3.5 pounds with 6-cell battery 4.875 pounds with 6-cell battery and optional external battery slice Price as configured: $1,299.00 (starting at $979.00)

  Read the article

• Memory Usage by Mapped Files (Win7 64Bit)

  - by Dexter

  When copying files from/to my external USB3 HDD memory usage in Win7 goes up to 100% and remains there. I'm not sure whether this is a problem caused by faulty drivers or not, but I already have the current version of them (Etron USB3 controller on a Gigabyte 990fxa board).. Using RAMMap it becomes obvious that the files, that are to be copied, are mapped into memory. Clicking on Empty > Empty System Working Set seems to temporarily fix the problem (without causing any trouble with the file copy process), but it needs to be done every few seconds. Is there any way to schedule this operation to happen ever 10 or so seconds on its own? What underlying system command is RAMMap using? Or, alternatively, is there any way to limit how much RAM mapped files may use in Windows 7? I know mapped files would usually be removed from memory if other programs need the memmory, but while memmory usage is at 100% the system starts freezing up for half a second or so everytime I click anything .. thus the automatic removal of unused memory contents seems to be failing here.

  Read the article

< Previous Page | 132 133 134 135 136 137 138 139 140 141 142 143  | Next Page >