24 bit - Page 137 - Developer IT

Private subnet for VM server host-only network

- by Derek Pressnall

At my current job, we distribute a product based on a Linux server with multiple VMs defined (using KVM / libvirt). We are planning to expose limited ports to the customer's network, and use iptables to direct inbound traffic to the appropriate internal VM. My question: is there a class of private subnets that I can use for the internal host-only network that is least likely to conflict with a client IP subnet? Specifically, if I choose a /24 out of any of the RFC-1918 defined private subnets (such as 192.168.x.x), there is a chance of conflicting with a customer-used range. I noticed that several current VM implementations default to 192.168.122.x -- is this due to an RFC that I'm not familiar with, and therefore this is a safe range to use (that most network admins would avoid)? Or did the various VM vendors just pick that range randomly? I guess I'm looking for an IP range that is more private than the existing private (RFC1918) addresses. The only other thought I had was to use one of the "Test Net" IP ranges reserved for documentation purposes (RFC 5737). Note, that I'm not worried about a customer's network blocking these IPs, as this is only internal to our server (packets get NATted before leaving the box). However this does seem more unorthodox than just sticking with the default 192.168.122.x/24 subnet.

Read the article

VM automatic provisioning advice

- by jdgregson

In my lab we have 24 workstations, each with five technician-maintained virtual machines set up in VMware Workstation. These provide a lot of management overhead, as we have to update them as well as the host operating systems every three months (the start of the next quarter), which adds up to 144 systems to update instead of just 24. Whenever we need to reimage the hosts, the VMs add another 130GB to each image, which is over 3TB of extra data to send over the network, and a lot more time to apply each image, and then we still have to boot all 120 VMs and assign them a unique IP Address and host names. We would like to get the VMs off the hosts and onto a server, but after looking around for a few days, I still don't know where to begin looking for a solution. There may be a better way to do this, but in my mind, the ideal solution would be to replace the VMs on the host machines with five Thin Client operating systems, each configured to connect to a server and be sent or connected to a unique virtual machine. We can't have 120 VMs running on the server all the time, so the server would have to create a copy of the VM from a template whenever a student tries to boot one, and destroy the VM after the student is finished with it. If there is another client application that has to be installed on the hosts that would be fine, the only reason I'd like to keep them in VMware Workstation is because students already know to look there for the VMs when they need to use them. What, if any, virtualization software will allow this? Is there some other solution I'm not seeing?

Read the article

Problem with hadoop start-dfs.sh

- by user288501

I installed and configured hadoop on my Ubuntu 14.04 server, virtualized inside of hyper-v, however I am getting an issue when i run start-dfs.sh root@sUbuntu01:/var/log# start-dfs.sh 14/06/04 15:27:08 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable Starting namenodes on [OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. localhost] sed: -e expression #1, char 6: unknown option to `s' -c: Unknown cipher type 'cd' localhost: Ubuntu 14.04 LTS localhost: starting namenode, logging to /usr/local/hadoop/logs/hadoop-root-namenode-sUbuntu01.out noexecstack'.: ssh: Could not resolve hostname noexecstack'.: Name or service not known '-z: ssh: Could not resolve hostname '-z: Name or service not known 'execstack: ssh: Could not resolve hostname 'execstack: Name or service not known disabled: ssh: Could not resolve hostname disabled: Name or service not known with: ssh: Could not resolve hostname with: Name or service not known have: ssh: Could not resolve hostname have: Name or service not known VM: ssh: Could not resolve hostname vm: Name or service not known stack: ssh: Could not resolve hostname stack: Name or service not known guard: ssh: Could not resolve hostname guard: Name or service not known fix: ssh: Could not resolve hostname fix: Name or service not known VM: ssh: Could not resolve hostname vm: Name or service not known the: ssh: Could not resolve hostname the: Name or service not known to: ssh: Could not resolve hostname to: Name or service not known warning:: ssh: Could not resolve hostname warning:: Name or service not known it: ssh: Could not resolve hostname it: Name or service not known now.: ssh: Could not resolve hostname now.: Name or service not known library: ssh: Could not resolve hostname library: Name or service not known will: ssh: Could not resolve hostname will: Name or service not known link: ssh: Could not resolve hostname link: Name or service not known or: ssh: Could not resolve hostname or: Name or service not known It's: ssh: Could not resolve hostname it's: Name or service not known <libfile>',: ssh: Could not resolve hostname <libfile>',: Name or service not known which: ssh: connect to host which port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out you: ssh: connect to host you port 22: Connection timed out try: ssh: connect to host try port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out highly: ssh: connect to host highly port 22: Connection timed out might: ssh: connect to host might port 22: Connection timed out loaded: ssh: connect to host loaded port 22: Connection timed out You: ssh: connect to host you port 22: Connection timed out guard.: ssh: connect to host guard. port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out Server: ssh: connect to host server port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out The: ssh: connect to host the port 22: Connection timed out recommended: ssh: connect to host recommended port 22: Connection timed out that: ssh: connect to host that port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out OpenJDK: ssh: connect to host openjdk port 22: Connection timed out 64-Bit: ssh: connect to host 64-bit port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out localhost: Ubuntu 14.04 LTS localhost: starting datanode, logging to /usr/local/hadoop/logs/hadoop-root-datanode-sUbuntu01.out localhost: OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. localhost: It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. Starting secondary namenodes [OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. 0.0.0.0] sed: -e expression #1, char 6: unknown option to `s' warning:: ssh: Could not resolve hostname warning:: Name or service not known -c: Unknown cipher type 'cd' It's: ssh: Could not resolve hostname it's: Name or service not known 'execstack: ssh: Could not resolve hostname 'execstack: Name or service not known '-z: ssh: Could not resolve hostname '-z: Name or service not known 0.0.0.0: Ubuntu 14.04 LTS 0.0.0.0: starting secondarynamenode, logging to /usr/local/hadoop/logs/hadoop-root-secondarynamenode-sUbuntu01.out 0.0.0.0: OpenJDK 64-Bit Server VM warning: You have loaded library /usr/local/hadoop/lib/native/libhadoop.so.1.0.0 which might have disabled stack guard. The VM will try to fix the stack guard now. 0.0.0.0: It's highly recommended that you fix the library with 'execstack -c <libfile>', or link it with '-z noexecstack'. noexecstack'.: ssh: Could not resolve hostname noexecstack'.: Name or service not known <libfile>',: ssh: Could not resolve hostname <libfile>',: Name or service not known link: ssh: Could not resolve hostname link: No address associated with hostname it: ssh: Could not resolve hostname it: No address associated with hostname to: ssh: connect to host to port 22: Connection timed out or: ssh: connect to host or port 22: Connection timed out you: ssh: connect to host you port 22: Connection timed out guard.: ssh: connect to host guard. port 22: Connection timed out VM: ssh: connect to host vm port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out Server: ssh: connect to host server port 22: Connection timed out might: ssh: connect to host might port 22: Connection timed out stack: ssh: connect to host stack port 22: Connection timed out You: ssh: connect to host you port 22: Connection timed out now.: ssh: connect to host now. port 22: Connection timed out disabled: ssh: connect to host disabled port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out will: ssh: connect to host will port 22: Connection timed out The: ssh: connect to host the port 22: Connection timed out have: ssh: connect to host have port 22: Connection timed out try: ssh: connect to host try port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out guard: ssh: connect to host guard port 22: Connection timed out the: ssh: connect to host the port 22: Connection timed out recommended: ssh: connect to host recommended port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out library: ssh: connect to host library port 22: Connection timed out 64-Bit: ssh: connect to host 64-bit port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out which: ssh: connect to host which port 22: Connection timed out VM: ssh: connect to host vm port 22: Connection timed out OpenJDK: ssh: connect to host openjdk port 22: Connection timed out fix: ssh: connect to host fix port 22: Connection timed out highly: ssh: connect to host highly port 22: Connection timed out that: ssh: connect to host that port 22: Connection timed out with: ssh: connect to host with port 22: Connection timed out loaded: ssh: connect to host loaded port 22: Connection timed out 14/06/04 15:36:02 WARN util.NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable Any advice?

Read the article

Twitter traffic might not be what it seems

- by Piet

Are you using bit.ly stats to measure interest in the links you post on twitter? I’ve been hearing for a while about people claiming to get the majority of their traffic originating from twitter these days. Now, I’ve been playing with the twitter ruby gem recently, doing various experiments which I’ll not go into detail here because they could be regarded as spamming… if I’d conduct them on a large scale, that is. It’s scary to see people actually engaging with @replies crafted with some regular expressions and eliza-like trickery on status updates found using the twitter api. I’m wondering how Twitter is going to contain the coming spam-flood. When posting links I used bit.ly as url shortener, since this one seems to be the de-facto standard on twitter. A nice thing about bit.ly is that it shows some basic stats about the redirects it performs for your shortened links. To my surprise, most links posted almost immediately resulted in several visitors. Now, seeing that I was posting the links together with some information concerning what the link is about, I concluded that the people who were actually clicking the links should be very targeted visitors. This felt a bit like free adwords, and I suddenly started to understand why everyone was raving about getting traffic from twitter. How wrong I was! (and I think several 1000 online marketers with me) On the destination site I used a traffic logging solution that works by including a little javascript snippet in your pages. It seemed that somehow all visitors disappeared after the bit.ly redirect and before getting to the site, because I was hardly seeing any visitors there. So I started investigating what was happening: by looking at the logfiles of the destination site, and by making my own ’shortened’ urls by doing redirects using a very short domain name I own. This way, I could check the apache access_log before the redirects. Most user agents turned out to be bots without a doubt. Here’s an excerpt of user-agents awk’ed from apache’s access_log for a time period of about one hour, right after posting some links: AideRSS 2.0 (postrank.com) Java/1.6.0_13 Java/1.6.0_14 libwww-perl/5.816 MLBot (www.metadatalabs.com/mlbot) Mozilla/4.0 (compatible;MSIE 5.01; Windows -NT 5.0 - real-url.org) Mozilla/5.0 (compatible; Twitturls; +http://twitturls.com) Mozilla/5.0 (compatible; Viralheat Bot/1.0; +http://www.viralheat.com/) Mozilla/5.0 (Danger hiptop 4.6; U; rv:1.7.12) Gecko/20050920 Mozilla/5.0 (X11; U; Linux i686; en-us; rv:1.9.0.2) Gecko/2008092313 Ubuntu/9.04 (jaunty) Firefox/3.5 OpenCalaisSemanticProxy PycURL/7.18.2 PycURL/7.19.3 Python-urllib/1.17 Twingly Recon twitmatic Twitturly / v0.6 Wget/1.10.2 (Red Hat modified) Wget/1.11.1 (Red Hat modified) Of the few user-agents that seem ‘real’ at first, half are originating from an ip-address used by Amazon EC2. And I doubt people are setting op proxies on there. Oh yeah, Googlebot (the real deal, from a legit google owned address) is sucking up posted links like fresh oysters. I guess google is trying to make sure in advance to never be beaten by twitter in the ‘realtime search’ department. Actually, I think it’d be almost stupid NOT to post any new pages/posts/websites on Twitter, it must be one of the fastest ways to get a Googlebot visit. Same experiment with a real, established twitter account Now, because I was posting the url’s either as ’status’ messages or directed @people, on a test-account with hardly any (human) followers, I checked again using the twitter accounts from a commercial site I’m involved with. These accounts all have between 500 and 1000 targeted (I think) followers. I checked the destination access_logs and also added ‘my’ redirect after the bit.ly redirect: same results, although seemingly a bit higher real visitor/bot ratio. Btw: one of these account was ‘punished’ with a 1 week lock recently because the same (1 one!) status update was sent that was sent right before using another account. They got an email explaining the lock because the account didn’t act according to their TOS. I can’t find anything in their TOS about it, can you? I don’t think Twitter is on the right track punishing a legit account, knowing the trickery I had been doing with it’s api went totally unpunished. I might be wrong though, I often am. On the other hand: this commercial site reported targeted traffic and actual signups from visitors coming from Twitter. The ones that are really real visitors are also very targeted. I’m just not sure if the amount of work involved could hold up against an adwords campaign. Reposting the same link over and over again helps On thing I noticed: It helps to keep on reposting the same links with regular intervals. I guess most people only look at their first page when checking out recent posts of the ones they’re following, or don’t look too far back when performing a search. Now, this probably isn’t according to the twitter TOS. Actually, it might be spamming but no-one is obligated to follow anyone else of course. This way, I was getting more real visitors and less bots. To my surprise (when my programmer’s hat is on) there were still repeated visits from the same bots coming from the same ip-addresses. Did they expect to find something else when visiting for a 2nd or 3rd time? (actually,this gave me an idea: you can’t change a link once it’s posted, but you can change where it redirects to) Most bots were smart enough not to follow the same link again though. Are you successful in getting real visitors from Twitter? Are you only relying on bit.ly to provide traffic stats?

Read the article

Solaris X86 AESNI OpenSSL Engine

- by danx

Solaris X86 AESNI OpenSSL Engine Cryptography is a major component of secure e-commerce. Since cryptography is compute intensive and adds a significant load to applications, such as SSL web servers (https), crypto performance is an important factor. Providing accelerated crypto hardware greatly helps these applications and will help lead to a wider adoption of cryptography, and lower cost, in e-commerce and other applications. The Intel Westmere microprocessor has six new instructions to acclerate AES encryption. They are called "AESNI" for "AES New Instructions". These are unprivileged instructions, so no "root", other elevated access, or context switch is required to execute these instructions. These instructions are used in a new built-in OpenSSL 1.0 engine available in Solaris 11, the aesni engine. Previous Work Previously, AESNI instructions were introduced into the Solaris x86 kernel and libraries. That is, the "aes" kernel module (used by IPsec and other kernel modules) and the Solaris pkcs11 library (for user applications). These are available in Solaris 10 10/09 (update 8) and above, and Solaris 11. The work here is to add the aesni engine to OpenSSL. X86 AESNI Instructions Intel's Xeon 5600 is one of the processors that support AESNI. This processor is used in the Sun Fire X4170 M2 As mentioned above, six new instructions acclerate AES encryption in processor silicon. The new instructions are: aesenc performs one round of AES encryption. One encryption round is composed of these steps: substitute bytes, shift rows, mix columns, and xor the round key. aesenclast performs the final encryption round, which is the same as above, except omitting the mix columns (which is only needed for the next encryption round). aesdec performs one round of AES decryption aesdeclast performs the final AES decryption round aeskeygenassist Helps expand the user-provided key into a "key schedule" of keys, one per round aesimc performs an "inverse mixed columns" operation to convert the encryption key schedule into a decryption key schedule pclmulqdq Not a AESNI instruction, but performs "carryless multiply" operations to acclerate AES GCM mode. Since the AESNI instructions are implemented in hardware, they take a constant number of cycles and are not vulnerable to side-channel timing attacks that attempt to discern some bits of data from the time taken to encrypt or decrypt the data. Solaris x86 and OpenSSL Software Optimizations Having X86 AESNI hardware crypto instructions is all well and good, but how do we access it? The software is available with Solaris 11 and is used automatically if you are running Solaris x86 on a AESNI-capable processor. AESNI is used internally in the kernel through kernel crypto modules and is available in user space through the PKCS#11 library. For OpenSSL on Solaris 11, AESNI crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "aesni engine." This is in lieu of the extra overhead of going through the Solaris OpenSSL pkcs11 engine, which accesses Solaris crypto and digest operations. Instead, AESNI assembly is included directly in the new aesni engine. Instead of including the aesni engine in a separate library in /lib/openssl/engines/, the aesni engine is "built-in", meaning it is included directly in OpenSSL's libcrypto.so.1.0.0 library. This reduces overhead and the need to manually specify the aesni engine. Since the engine is built-in (that is, in libcrypto.so.1.0.0), the openssl -engine command line flag or API call is not needed to access the engine—the aesni engine is used automatically on AESNI hardware. Ciphers and Digests supported by OpenSSL aesni engine The Openssl aesni engine auto-detects if it's running on AESNI hardware and uses AESNI encryption instructions for these ciphers: AES-128-CBC, AES-192-CBC, AES-256-CBC, AES-128-CFB128, AES-192-CFB128, AES-256-CFB128, AES-128-CTR, AES-192-CTR, AES-256-CTR, AES-128-ECB, AES-192-ECB, AES-256-ECB, AES-128-OFB, AES-192-OFB, and AES-256-OFB. Implementation of the OpenSSL aesni engine The AESNI assembly language routines are not a part of the regular Openssl 1.0.0 release. AESNI is a part of the "HEAD" ("development" or "unstable") branch of OpenSSL, for future release. But AESNI is also available as a separate patch provided by Intel to the OpenSSL project for OpenSSL 1.0.0. A minimal amount of "glue" code in the aesni engine works between the OpenSSL libcrypto.so.1.0.0 library and the assembly functions. The aesni engine code is separate from the base OpenSSL code and requires patching only a few source files to use it. That means OpenSSL can be more easily updated to future versions without losing the performance from the built-in aesni engine. OpenSSL aesni engine Performance Here's some graphs of aesni engine performance I measured by running openssl speed -evp $algorithm where $algorithm is aes-128-cbc, aes-192-cbc, and aes-256-cbc. These are using the 64-bit version of openssl on the same AESNI hardware, a Sun Fire X4170 M2 with a Intel Xeon E5620 @2.40GHz, running Solaris 11 FCS. "Before" is openssl without the aesni engine and "after" is openssl with the aesni engine. The numbers are MBytes/second. OpenSSL aesni engine performance on Sun Fire X4170 M2 (Xeon E5620 @2.40GHz) (Higher is better; "before"=OpenSSL on AESNI without AESNI engine software, "after"=OpenSSL AESNI engine) As you can see the speedup is dramatic for all 3 key lengths and for data sizes from 16 bytes to 8 Kbytes—AESNI is about 7.5-8x faster over hand-coded amd64 assembly (without aesni instructions). Verifying the OpenSSL aesni engine is present The easiest way to determine if you are running the aesni engine is to type "openssl engine" on the command line. No configuration, API, or command line options are needed to use the OpenSSL aesni engine. If you are running on Intel AESNI hardware with Solaris 11 FCS, you'll see this output indicating you are using the aesni engine: intel-westmere $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support If you are running on Intel without AESNI hardware you'll see this output indicating the hardware can't support the aesni engine: intel-nehalem $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support For Solaris on SPARC or older Solaris OpenSSL software, you won't see any aesni engine line at all. Third-party OpenSSL software (built yourself or from outside Oracle) will not have the aesni engine either. Solaris 11 FCS comes with OpenSSL version 1.0.0e. The output of typing "openssl version" should be "OpenSSL 1.0.0e 6 Sep 2011". 64- and 32-bit OpenSSL OpenSSL comes in both 32- and 64-bit binaries. 64-bit executable is now the default, at /usr/bin/openssl, and OpenSSL 64-bit libraries at /lib/amd64/libcrypto.so.1.0.0 and libssl.so.1.0.0 The 32-bit executable is at /usr/bin/i86/openssl and the libraries are at /lib/libcrytpo.so.1.0.0 and libssl.so.1.0.0. Availability The OpenSSL AESNI engine is available in Solaris 11 x86 for both the 64- and 32-bit versions of OpenSSL. It is not available with Solaris 10. You must have a processor that supports AESNI instructions, otherwise OpenSSL will fallback to the older, slower AES implementation without AESNI. Processors that support AESNI include most Westmere and Sandy Bridge class processor architectures. Some low-end processors (such as for mobile/laptop platforms) do not support AESNI. The easiest way to determine if the processor supports AESNI is with the isainfo -v command—look for "amd64" and "aes" in the output: $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu Conclusion The Solaris 11 OpenSSL aesni engine provides easy access to powerful Intel AESNI hardware cryptography, in addition to Solaris userland PKCS#11 libraries and Solaris crypto kernel modules.

Read the article

Solaris X86 AESNI OpenSSL Engine

- by danx

Solaris X86 AESNI OpenSSL Engine Cryptography is a major component of secure e-commerce. Since cryptography is compute intensive and adds a significant load to applications, such as SSL web servers (https), crypto performance is an important factor. Providing accelerated crypto hardware greatly helps these applications and will help lead to a wider adoption of cryptography, and lower cost, in e-commerce and other applications. The Intel Westmere microprocessor has six new instructions to acclerate AES encryption. They are called "AESNI" for "AES New Instructions". These are unprivileged instructions, so no "root", other elevated access, or context switch is required to execute these instructions. These instructions are used in a new built-in OpenSSL 1.0 engine available in Solaris 11, the aesni engine. Previous Work Previously, AESNI instructions were introduced into the Solaris x86 kernel and libraries. That is, the "aes" kernel module (used by IPsec and other kernel modules) and the Solaris pkcs11 library (for user applications). These are available in Solaris 10 10/09 (update 8) and above, and Solaris 11. The work here is to add the aesni engine to OpenSSL. X86 AESNI Instructions Intel's Xeon 5600 is one of the processors that support AESNI. This processor is used in the Sun Fire X4170 M2 As mentioned above, six new instructions acclerate AES encryption in processor silicon. The new instructions are: aesenc performs one round of AES encryption. One encryption round is composed of these steps: substitute bytes, shift rows, mix columns, and xor the round key. aesenclast performs the final encryption round, which is the same as above, except omitting the mix columns (which is only needed for the next encryption round). aesdec performs one round of AES decryption aesdeclast performs the final AES decryption round aeskeygenassist Helps expand the user-provided key into a "key schedule" of keys, one per round aesimc performs an "inverse mixed columns" operation to convert the encryption key schedule into a decryption key schedule pclmulqdq Not a AESNI instruction, but performs "carryless multiply" operations to acclerate AES GCM mode. Since the AESNI instructions are implemented in hardware, they take a constant number of cycles and are not vulnerable to side-channel timing attacks that attempt to discern some bits of data from the time taken to encrypt or decrypt the data. Solaris x86 and OpenSSL Software Optimizations Having X86 AESNI hardware crypto instructions is all well and good, but how do we access it? The software is available with Solaris 11 and is used automatically if you are running Solaris x86 on a AESNI-capable processor. AESNI is used internally in the kernel through kernel crypto modules and is available in user space through the PKCS#11 library. For OpenSSL on Solaris 11, AESNI crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "aesni engine." This is in lieu of the extra overhead of going through the Solaris OpenSSL pkcs11 engine, which accesses Solaris crypto and digest operations. Instead, AESNI assembly is included directly in the new aesni engine. Instead of including the aesni engine in a separate library in /lib/openssl/engines/, the aesni engine is "built-in", meaning it is included directly in OpenSSL's libcrypto.so.1.0.0 library. This reduces overhead and the need to manually specify the aesni engine. Since the engine is built-in (that is, in libcrypto.so.1.0.0), the openssl -engine command line flag or API call is not needed to access the engine—the aesni engine is used automatically on AESNI hardware. Ciphers and Digests supported by OpenSSL aesni engine The Openssl aesni engine auto-detects if it's running on AESNI hardware and uses AESNI encryption instructions for these ciphers: AES-128-CBC, AES-192-CBC, AES-256-CBC, AES-128-CFB128, AES-192-CFB128, AES-256-CFB128, AES-128-CTR, AES-192-CTR, AES-256-CTR, AES-128-ECB, AES-192-ECB, AES-256-ECB, AES-128-OFB, AES-192-OFB, and AES-256-OFB. Implementation of the OpenSSL aesni engine The AESNI assembly language routines are not a part of the regular Openssl 1.0.0 release. AESNI is a part of the "HEAD" ("development" or "unstable") branch of OpenSSL, for future release. But AESNI is also available as a separate patch provided by Intel to the OpenSSL project for OpenSSL 1.0.0. A minimal amount of "glue" code in the aesni engine works between the OpenSSL libcrypto.so.1.0.0 library and the assembly functions. The aesni engine code is separate from the base OpenSSL code and requires patching only a few source files to use it. That means OpenSSL can be more easily updated to future versions without losing the performance from the built-in aesni engine. OpenSSL aesni engine Performance Here's some graphs of aesni engine performance I measured by running openssl speed -evp $algorithm where $algorithm is aes-128-cbc, aes-192-cbc, and aes-256-cbc. These are using the 64-bit version of openssl on the same AESNI hardware, a Sun Fire X4170 M2 with a Intel Xeon E5620 @2.40GHz, running Solaris 11 FCS. "Before" is openssl without the aesni engine and "after" is openssl with the aesni engine. The numbers are MBytes/second. OpenSSL aesni engine performance on Sun Fire X4170 M2 (Xeon E5620 @2.40GHz) (Higher is better; "before"=OpenSSL on AESNI without AESNI engine software, "after"=OpenSSL AESNI engine) As you can see the speedup is dramatic for all 3 key lengths and for data sizes from 16 bytes to 8 Kbytes—AESNI is about 7.5-8x faster over hand-coded amd64 assembly (without aesni instructions). Verifying the OpenSSL aesni engine is present The easiest way to determine if you are running the aesni engine is to type "openssl engine" on the command line. No configuration, API, or command line options are needed to use the OpenSSL aesni engine. If you are running on Intel AESNI hardware with Solaris 11 FCS, you'll see this output indicating you are using the aesni engine: intel-westmere $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support If you are running on Intel without AESNI hardware you'll see this output indicating the hardware can't support the aesni engine: intel-nehalem $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support For Solaris on SPARC or older Solaris OpenSSL software, you won't see any aesni engine line at all. Third-party OpenSSL software (built yourself or from outside Oracle) will not have the aesni engine either. Solaris 11 FCS comes with OpenSSL version 1.0.0e. The output of typing "openssl version" should be "OpenSSL 1.0.0e 6 Sep 2011". 64- and 32-bit OpenSSL OpenSSL comes in both 32- and 64-bit binaries. 64-bit executable is now the default, at /usr/bin/openssl, and OpenSSL 64-bit libraries at /lib/amd64/libcrypto.so.1.0.0 and libssl.so.1.0.0 The 32-bit executable is at /usr/bin/i86/openssl and the libraries are at /lib/libcrytpo.so.1.0.0 and libssl.so.1.0.0. Availability The OpenSSL AESNI engine is available in Solaris 11 x86 for both the 64- and 32-bit versions of OpenSSL. It is not available with Solaris 10. You must have a processor that supports AESNI instructions, otherwise OpenSSL will fallback to the older, slower AES implementation without AESNI. Processors that support AESNI include most Westmere and Sandy Bridge class processor architectures. Some low-end processors (such as for mobile/laptop platforms) do not support AESNI. The easiest way to determine if the processor supports AESNI is with the isainfo -v command—look for "amd64" and "aes" in the output: $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu Conclusion The Solaris 11 OpenSSL aesni engine provides easy access to powerful Intel AESNI hardware cryptography, in addition to Solaris userland PKCS#11 libraries and Solaris crypto kernel modules.

Read the article

Enable wireless on Dell Inspiron 1300

- by Simon

As per subject, I've looked at various resources and attempted ndiswrapper solutions, found a one-click solution that lead to a 404 and this but none works. I've run all updates. Once I managed to lose my wired connection as well and had to reinstall. This is my first hour with Linux. iwconfig gives this before I do anything: lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extens Thanks for responding lspci returns 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at eff8 [size=8] Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: intelfb, i915 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at dff80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 30000000-301fffff Prefetchable memory behind bridge: 0000000030200000-00000000303fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: dfc00000-dfdfffff Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at bf80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at bf60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bf40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at bf20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI]) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: dfb00000-dfbfffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) Subsystem: Dell Device 01c9 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device 01c9 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at bfa0 [size=16] Kernel driver in use: ata_piix 02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) Subsystem: Dell Device 01c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 18 Region 0: Memory at dfbfc000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: b44 Kernel modules: b44 02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) Subsystem: Dell Wireless 1370 WLAN Mini-PCI Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 17 Region 0: Memory at dfbfe000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: b43-pci-bridge Kernel modules: ssb and the rfkill shows 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Just checking addtional drivers. Says no additional driver installed in this system

Read the article

strange sqares like hints in Silverlight application?

- by lina

Good day! Strange square appears on mouse hover on text boxes, buttons, etc (something like hint) in a silverlight navigation application - how can I remove it? a scrin shot an example .xaml page: <Code:BasePage x:Class="CAP.Views.Main" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:Code="clr-namespace:CAP.Code" d:DesignWidth="640" d:DesignHeight="480" Title="?????? ??????? ???????? ??? ?????"> <Grid x:Name="LayoutRoot"> <Grid.RowDefinitions> <RowDefinition Height="103*" /> <RowDefinition Height="377*" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition Width="120*" /> <ColumnDefinition Width="520*" /> </Grid.ColumnDefinitions> <Image Height="85" HorizontalAlignment="Left" Name="image1" Stretch="Fill" VerticalAlignment="Top" Width="84" Margin="12,0,0,0" ImageFailed="image1_ImageFailed" Source="/CAP;component/Images/My-Computer.png" /> <TextBlock Grid.Column="1" Height="Auto" TextWrapping="Wrap" HorizontalAlignment="Left" Margin="0,12,0,0" Name="textBlock1" Text="Good day!" VerticalAlignment="Top" FontFamily="Verdana" FontSize="16" Width="345" FontWeight="Bold" /> <TextBlock Grid.Column="1" Grid.Row="1" TextWrapping="Wrap" Height="299" HorizontalAlignment="Left" Name="textBlock2" VerticalAlignment="Top" FontFamily="Verdana" FontSize="14" Width="441" > <Run Text="Some text "/><LineBreak/><LineBreak/><Run Text="and so on"/> <LineBreak/> </TextBlock> </Grid> xaml.cs: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Navigation; using CAP.Code; namespace CAP.Views { public partial class Main : BasePage { public Main() : base() { InitializeComponent(); MapBuilder.AddToMap(new SiteMapUnit() { Caption = "???????", RelativeUrl = "Main" },true); ((App)Application.Current).Mainpage.tvMainMenu.SelectedItems.Clear(); } // Executes when the user navigates to this page. protected override void OnNavigatedTo(NavigationEventArgs e) { } private void image1_ImageFailed(object sender, ExceptionRoutedEventArgs e) { } protected override string[] NeededPermission() { return new string[0]; } } } MainPage.xaml <UserControl x:Class="CAP.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Code="clr-namespace:CAP.Code" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:uriMapper="clr-namespace:System.Windows.Navigation;assembly=System.Windows.Controls.Navigation" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls" xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation" mc:Ignorable="d" Margin="0,0,0,0" Width="auto" Height="auto" xmlns:dataInput="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data.Input"> <ScrollViewer Width="auto" Height="auto" BorderBrush="White" BorderThickness="0" Margin="0,0,0,0" x:Name="sV" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Auto" > <ScrollViewer.Content> <Grid Width="auto" Height="auto" x:Name="LayoutRoot" Style="{StaticResource LayoutRootGridStyle}" Margin="0,0,0,0"> <StackPanel Width="auto" Height="auto" Orientation="Vertical" Margin="250,0,0,50"> <Border x:Name="ContentBorder2" Margin="0,0,0,0" >  <StackPanel Orientation="Vertical" Height="82" Width="Auto" HorizontalAlignment="Right" Margin="0,0,0,0" DataContext="{Binding}"> <TextBlock HorizontalAlignment="Right" Foreground="White" x:Name="ApplicationNameTextBlock4" Style="{StaticResource ApplicationNameStyle}" FontSize="20" Text="?????? ???????" Margin="20,16,20,0"/> <StackPanel Orientation="Horizontal" HorizontalAlignment="Right"> <Image x:Name="imDoor" Visibility="Collapsed" MouseEnter="imDoor_MouseEnter" MouseLeave="imDoor_MouseLeave" Height="24" Stretch="Fill" Width="25" Margin="10,0,10,0" Source="/CAP;component/Images/sm_white_doors.png" MouseLeftButtonDown="bTest_Click" /> <TextBlock x:Name="bLogout" MouseEnter="bLogout_MouseEnter" MouseLeave="bLogout_MouseLeave" TextDecorations="Underline" Margin="0,6,20,4" Height="23" Text="?????" HorizontalAlignment="Right" Visibility="Collapsed" MouseLeftButtonDown="bTest_Click" FontFamily="Verdana" FontSize="13" FontWeight="Normal" Foreground="#FF1C1C92" /> </StackPanel> </StackPanel> </Border> <Border x:Name="bSiteMap" Margin="0,0,0,0" > <StackPanel x:Name="spSiteMap" Orientation="Horizontal" Height="20" Width="Auto" HorizontalAlignment="Left" Margin="0,0,0,0" DataContext="{Binding}">  </StackPanel> </Border> <Border Width="auto" Height="auto" x:Name="ContentBorder" Margin="0,0,0,0" > <navigation:Frame x:Name="ContentFrame" Style="{StaticResource ContentFrameStyle}" Source="Main" Navigated="ContentFrame_Navigated" NavigationFailed="ContentFrame_NavigationFailed" ToolTipService.ToolTip=" " Margin="0,0,0,0"> <navigation:Frame.UriMapper> <uriMapper:UriMapper>  <uriMapper:UriMapping Uri="RegistrateClient" MappedUri="/Views/Client/RegistrateClient.xaml"/>  </uriMapper:UriMapper> </navigation:Frame.UriMapper> </navigation:Frame> </Border> </StackPanel> <Grid x:Name="NavigationGrid" Style="{StaticResource NavigationGridStyle}" Margin="0,0,0,0" Background="{x:Null}" > <StackPanel Orientation="Vertical" Height="Auto" Width="250" HorizontalAlignment="Center" Margin="0,0,0,50" DataContext="{Binding}"> <Image Width="150" Height="90" HorizontalAlignment="Center" VerticalAlignment="Top" Source="/CAP;component/Images/logo__au.png" Margin="0,20,0,70"/> <Border x:Name="BrandingBorder" MinHeight="222" Width="250" Style="{StaticResource BrandingBorderStyle3}" HorizontalAlignment="Center" Opacity="60" Margin="0,0,0,0"> <Border.Background> <ImageBrush ImageSource="/CAP;component/Images/papka.png"/> </Border.Background> <Grid Width="250" x:Name="LichniyCabinet" Margin="0,10,0,0" HorizontalAlignment="Center" Height="211"> <Grid.ColumnDefinitions> <ColumnDefinition Width="19*" /> <ColumnDefinition Width="62*" /> <ColumnDefinition Width="151*" /> <ColumnDefinition Width="18*" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="13" /> <RowDefinition Height="24" /> <RowDefinition Height="35" /> <RowDefinition Height="35" /> <RowDefinition Height="43" /> <RowDefinition Height="28" /> <RowDefinition Height="32*" /> </Grid.RowDefinitions> <TextBlock Visibility="Visible" Grid.Row="2" Height="23" HorizontalAlignment="Left" x:Name="tLogin" Text="?????" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" Foreground="White" Margin="1,0,0,0" Grid.Column="1" /> <TextBlock Visibility="Visible" FontFamily="Verdana" FontSize="13" Foreground="White" Height="23" HorizontalAlignment="Left" x:Name="tPassw" Text="??????" VerticalAlignment="Top" Grid.Row="3" Grid.Column="1" /> <TextBox Visibility="Visible" Grid.Column="2" Grid.Row="2" Height="24" HorizontalAlignment="Left" x:Name="logLogin" VerticalAlignment="Top" Width="150" /> <PasswordBox Visibility="Visible" Code:DefaultButtonService.DefaultButton="{Binding ElementName=bLogin}" PasswordChar="*" Height="24" HorizontalAlignment="Left" x:Name="logPassword" VerticalAlignment="Top" Width="150" Grid.Column="2" Grid.Row="3" /> <Button x:Name="bLogin" MouseEnter="bLogin_MouseEnter" MouseLeave="bLogin_MouseLeave" Visibility="Visible" Content="?????" Grid.Column="2" Grid.Row="4" Click="Button_Click" Height="23" HorizontalAlignment="Left" Margin="81,0,0,0" VerticalAlignment="Top" Width="70" /> <TextBlock MouseLeftButtonDown="ForgotPassword_MouseLeftButtonDown" MouseEnter="ForgotPassword_MouseEnter" MouseLeave="ForgotPassword_MouseLeave" Visibility="Visible" TextDecorations="Underline" Grid.ColumnSpan="2" Grid.Row="4" Height="23" HorizontalAlignment="Left" x:Name="ForgotPassword" Text="?????? ???????" VerticalAlignment="Top" Foreground="White" FontFamily="Verdana" FontSize="13" Grid.Column="1" /> <TextBlock MouseEnter="tbRegistration_MouseEnter" MouseLeave="tbRegistration_MouseLeave" MouseLeftButtonDown="tbRegistration_MouseLeftButtonDown" Grid.Column="2" Grid.Row="6" Height="23" x:Name="tbRegistration" TextDecorations="Underline" Text="???????????" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" TextAlignment="Center" HorizontalAlignment="Center" Foreground="#FF1C1C92" FontWeight="Normal" Margin="0,0,57,0" /> <TextBlock Cursor="Arrow" Height="23" HorizontalAlignment="Left" Margin="11,-3,0,0" Text="?????? ???????" VerticalAlignment="Top" Grid.ColumnSpan="3" Grid.RowSpan="2" FontFamily="Verdana" FontSize="13" FontWeight="Bold" Foreground="White" /> <Image Visibility="Collapsed" Height="70" x:Name="imUser" Stretch="Fill" Width="70" Grid.ColumnSpan="2" Margin="11,0,0,0" Grid.Row="2" Grid.RowSpan="2" Source="/CAP;component/Images/user2.png" /> <TextBlock x:Name="tbHello" Grid.Column="2" Visibility="Collapsed" Grid.Row="2" Height="auto" TextWrapping="Wrap" HorizontalAlignment="Left" Margin="6,0,0,0" Text="" VerticalAlignment="Top" FontFamily="Verdana" FontSize="13" Foreground="White" Width="145" /> </Grid> </Border> <Border x:Name="MenuBorder" Margin="0,0,0,50" Width="250" Visibility="Collapsed"> <StackPanel x:Name="spMenu" Width="240" HorizontalAlignment="Left"> <telerikNavigation:RadTreeView x:Name="tvMainMenu" Width="240" Selected="TreeView1_Selected" SelectedValuePath="Text" telerik:Theming.Theme="Windows7" FontFamily="Verdana" FontSize="12"/> </StackPanel> </Border> </StackPanel> </Grid> <Border x:Name="FooterBorder" VerticalAlignment="Bottom" Width="auto" Height="76"> <Border.Background> <ImageBrush ImageSource="/CAP;component/Images/footer2.png" /> </Border.Background> <TextBlock x:Name="tbFooter" Height="24" Width="auto" Margin="0,20,0,0" TextAlignment="Center" HorizontalAlignment="Stretch" VerticalAlignment="Center" Foreground="White" FontFamily="Verdana" FontSize="11"> </TextBlock> </Border> </Grid> </ScrollViewer.Content> </ScrollViewer> </UserControl> MainPage.xaml.cs using System; using System.Collections.Generic; using System.Linq; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Navigation; using CAP.Code; using CAP.Registrator; using System.Windows.Input; using System.ComponentModel.DataAnnotations; using System.Windows.Browser; using Telerik.Windows.Controls; using System.Net; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Navigation; using System.Windows.Shapes; namespace CAP { public partial class MainPage { public App Appvars = Application.Current as App; private readonly RegistratorClient registrator; public SiteMapBuilder builder; public MainPage() { InitializeComponent(); sV.SetIsMouseWheelScrollingEnabled(true); builder = new SiteMapBuilder(spSiteMap); try { //working with service } catch { this.ContentFrame.Navigate(new Uri(String.Format("ErrorPage"), UriKind.RelativeOrAbsolute)); } } /// Recursive method to update the correct scrollviewer (if exists) private ScrollViewer CheckParent(FrameworkElement element) { ScrollViewer _result = element as ScrollViewer; if (element != null && _result == null) { FrameworkElement _temp = element.Parent as FrameworkElement; _result = CheckParent(_temp); } return _result; } // If an error occurs during navigation, show an error window private void ContentFrame_NavigationFailed(object sender, NavigationFailedEventArgs e) { e.Handled = true; ChildWindow errorWin = new ErrorWindow(e.Uri); errorWin.Show(); } } }

Read the article

A Rose by Any Other Name..

- by Geoff N. Hiten

It is always a good start when you can steal a title line from one of the best writers in the English language. Let’s hope I can make the rest of this post live up to the opening. One recurring problem with SQL server is moving databases to new servers. Client applications use a variety of ways to resolve SQL Server names, some of which are not changed easily <cough SharePoint /cough>. If you happen to be using default instances on both the source and target SQL Server, then the solution is pretty simple. You create (or bug the network admin until she creates) two DNS “A” records. One points the old name to the new IP address. The other creates a new alias for the old server, since the original system name is now redirected. Note this will redirect ALL traffic from the old server to the new server, including RDP and file share connection attempts. Figure 1 – Microsoft DNS MMC Snap-In Figure 2 – DNS New Host Dialog Box Both records are necessary so you can still access the old server via an alternate name. Server Role IP Address Name Alias Source 10.97.230.60 SQL01 SQL01_Old Target 10.97.230.80 SQL02 SQL01 Table 1 – Alias List If you or somebody set up connections via IP address, you deserve to have to go to each app and fix it by hand. That is the only way to fix that particular foul-up. If have to deal with Named Instances either as a source or a target, then it gets more complicated. The standard fix is to use the SQL Server Configuration Manager (or one of its earlier incarnations) to create a SQL client alias to redirect the connection. This can be a pain installing and configuring the app on multiple client servers. The good news is that SQL Server Configuration Manager AND all of its earlier versions simply write a few registry keys. Extracting the keys into a .reg file makes centralized automated deployment a snap. If the client is a 32-bit system, you have to extract the native key. If it is a 64-bit, you have to extract the native key and the WoW (32 bit on 64 bit host) key. First, pick a development system to create the actual registry key. If you do this repeatedly, you can simply edit an existing registry file. Create the entry using the SQL Configuration Manager. You must use a 64-bit system to create the WoW key. The following example redirects from a named instance “SQL01\SQLUtiluty” to a default instance on “SQL02”. Figure 3 – SQL Server Configuration Manager - Native Figure 3 shows the native key listing. Figure 4 – SQL Server Configuration Manager – WoW If you think you don’t need the WoW key because your app is 64 it, think again. SQL Server Management Server is a 32-bit app, as are most SQL test utilities. Always create both keys for 64-bit target systems. Now that the keys exist, we can extract them into a .reg file. Fire up REGEDIT and browse to the following location: HKLM\Software\Microsoft\MSSQLServer\Client\ConnectTo. You can also search the registry for the string value of one of the server names (old or new). Right click on the “ConnectTo” label and choose “Export”. Save with an appropriate name and location. The resulting file should look something like this: Figure 5 – SQL01_Alias.reg Repeat the process with the location: HKLM\Software\Wow6432Node\Microsoft\MSSQLServer\Client\ConnectTo Note that if you have multiple alias entries, ALL of the entries will be exported. In that case, you can edit the file and remove the extra aliases. You can edit the files together into a single file. Just leave a blank line between new keys like this: Figure 6 – SQL01_Alias_All.reg Of course if you have an automatic way to deploy, it makes sense to have an automatic way to Un-deploy. To delete a registry key, simply edit the .reg file and replace the target with a “-“ sign like so. Figure 7 – SQL01_Alias_UNDO.reg Now we have the ability to move any database to any server without having to install or change any applications on any client server. The whole process should be transparent to the applications, which makes planning and coordinating database moves a far simpler task.

Read the article

Building InstallShield based Installers using Team Build 2010

- by jehan

Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list. Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from from FileàNewà project àInstallShield Projects. Here, I’m using InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for TailSpin application. Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting. Once I did above changes, the build got successful.

Read the article

Easiest way to open chm files programmatically?

- by Adrian Grigore

Hi, I have a legacy 32-bit application written in Borland's C++ Builder. I need to show specific pages from within a HtmlHelp file programmatically. Until now I've been doing this via HtmlHelp.ocx, but this does not work on x64 versions of Windows Vista / Windows7 as described in this thread. I can't compile the application as 64-bit executable. Therefore the only workaround I have found so far is to create a 32-bit component implementing a COM object which loads and calls into the 32-bit DLL, and exposes the 32-bit DLL interface as a COM interface. That sounds far too complicated just to display a chml file with a specific topic. There must be something else. But what is it?

Read the article

Deploying a PyQt application on Windows Vista x64

- by Skilldrick

I'm working on an application for a client/friend using PyQt. I've been working on Linux and testing on Vista, but the target computer is Vista x64. Now, Python comes with compiled binaries of Python 2.6 for 64 bit Windows, but Riverbank don't provide 64 bit binaries for PyQt. I don't have much access to the target computer, so I can't really go through the hassle of compiling PyQt. This Google code project might be the solution, but I'm not sure if it's going to work. Can I use something like py2exe from 32 bit Vista, or would I have to have to make the executable from a 64 bit machine with PyQt 64 bit installed? Basically, am I going to have to compile PyQt on the target machine?

Read the article

WebKit and npapi and mingw-w64

- by rubenvb

Hi, The problem is the following: On Windows x64, pointers are 64-bit, but type long is 32-bit. MSVC doesn't seem to care, and even omits warnings about pointer truncation on the default warning level. Since recently, there is a GCC that target x86_64-w64-mingw32, or better Windows x64 native. GCC produces errors when pointers are truncated (which is the logical thing to do...), and this is causing trouble in WebKit and more specifically, the Netscape Plugin API: First, there's the files (I can only post one hyperlink...): http://trac.webkit.org/browser/trunk/WebCore/ bridge/npapi.h -- defines uint32 as 32-bit int type (~line 145) plugins/win/PluginViewWin.cpp -- casts Windows window handles to 32-bit int, truncating them (~line 450) My proposed fix was to change the uint32 casts to uintptr_t, which makes GCC happy, but still puts a 64-bit value in a uint32 (=unsigned long). I have no clue how to solve this, because clearly WebKit is happy truncating pointers on Win64... How can I solve this the right way? Thanks!

Read the article

Filtering and copying with PowerShell

- by Bergius

In my quest to improve my PowerShell skills, here's an example of an ugly solution to a simple problem. Any suggestions how to improve the oneliner are welcome. Mission: trim a huge icon library down to something a bit more manageable. The original directory structure looks like this: /Apps and Utilities /Compile /32 Bit Alpha png /Compile 16 n p.png /+ 10 or more files /+ 5 more formats with 10 or more files each /+ 20 or so icon names /+ 22 more categories I want to copy the 32 Bit Alpha pngs and flatten the directory structure a bit. Here's my quick and very dirty solution: $dest = mkdir c:\icons; gci -r | ? { $_.Name -eq '32 Bit Alph a png' } | % { mkdir ("$dest\" + $_.Parent.Parent.Name + "\" + $_.Parent.Name); $_ } | gci | % { cp $_. FullName -dest ("$dest\" + $_.Directory.Parent.Parent + "\" + $_.Directory.Parent) } Not nice, but it solved my problem. Resulting structure: /Apps and Utilities /Compile /Compile 16 n p.png /etc /etc /etc How would you do it?

Read the article

DllImport Based on OS Platform

- by Ngu Soon Hui

I have a mixture of unmanaged code ( backend) and managed code ( front end), as such, I would need to call the unmanaged code from my managed code, using interop techniques and DllImport attribute. Now, I've compiled two versions of unmanaged code, for both 32 and 64 bit OS; they are named service32.dll and service64.dll respectively. So, in my .Net code, I would have to do a DllImport for both dlls: [DllImport(@"service32.dll")] //for 32 bit OS invocation public static void SimpleFunction(); [DllImport(@"service64.dll")] //for 64 bit OS invocation public static void SimpleFunction(); And call them depending on which platform my application is running on. The issue now is that for every unmanaged function, I have to declared it twice, one for 32 bit OS and one for 64 bit OS. This is a duplication of work, and everytime I change the signature of an unmanaged function, I have to modified it in two places. Is there anyway that I can change the argument in DllImport so that the correct dll will be invoked automagically, depending on the platform?

Read the article

Can an URL shortener pass parameters?

- by ManniAT

Hi, I use bit.ly to shorten my urls. My problem - paramters are not passed. Let me explain I use http://bit.ly/MYiPhoneApps which redirects (let's say) to http://iphone.pp-p.net/default.aspx Now when I try http://bit.ly/MYiPhoneApps?param=xx this param is not added to the resulting url. I know I could create an extra "short url" including a paramter - so http://bit.ly/WithParam would result in http://www.mysite.com/somepath/apage.aspx?Par1=yy and so forth. But what I want is to have a short URL directing to a page - and then I want to add a parameter to this shortened url - which shoul (of course) land at my page. Is this a shortcome of bit.ly (and others are maybe able to do it) - or does "parameter forwarding" not work with 301 redirections? Manfred

Read the article

Sinatra and XML POST request

- by user292815

I don't know is it my mistake or no. So i have that code: <code> post '/singin/get_token' do content_type :xml puts request.body.read puts xmlRequest xmlRequest = REXML::Document.new(request.body.read) ... </code> And when i post something like that: <code> <?xml version="1.0" encoding="utf-16"?><request xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><username>adsfasdf</username></request> </code> I receive that in my console: <code> 127.0.0.1 - - [12/Mar/2010 21:18:20] "POST /singin/get_token HTTP/1.1" 500 105872 0.1339 Iconv::InvalidCharacter - ">": /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/encodings/ICONV.rb:7:in `conv' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/encodings/ICONV.rb:7:in `decode_iconv' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:58:in `encoding=' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:46:in `initialize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:164:in `initialize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:17:in `new' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:17:in `create_from' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/parsers/baseparser.rb:146:in `stream=' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/parsers/baseparser.rb:123:in `initialize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/parsers/treeparser.rb:9:in `new' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/parsers/treeparser.rb:9:in `initialize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/document.rb:228:in `new' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/document.rb:228:in `build' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/document.rb:43:in `initialize' zaiaku-game-server.rb:70:in `new' zaiaku-game-server.rb:70:in `block in <main>' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/showexceptions.rb:24:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/methodoverride.rb:24:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/commonlogger.rb:18:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/content_length.rb:13:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/chunked.rb:15:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/handler/thin.rb:14:in `run'Iconv::InvalidCharacter: ">" /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/encodings/ICONV.rb:7:in `conv' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/encodings/ICONV.rb:7:in `decode_iconv' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:58:in `encoding=' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:46:in `initialize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:164:in `initialize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:17:in `new' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/source.rb:17:in `create_from' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/parsers/baseparser.rb:146:in `stream=' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/parsers/baseparser.rb:123:in `initialize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/parsers/treeparser.rb:9:in `new' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/parsers/treeparser.rb:9:in `initialize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/document.rb:228:in `new' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/document.rb:228:in `build' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/1.9.1/rexml/document.rb:43:in `initialize' zaiaku-game-server.rb:70:in `new' zaiaku-game-server.rb:70:in `block in <main>' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:811:in `call' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:811:in `block in route' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:488:in `instance_eval' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:488:in `route_eval' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:477:in `block (2 levels) in route!' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:474:in `catch' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:474:in `block in route!' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:453:in `each' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:453:in `route!' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:569:in `dispatch!' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:388:in `block in call!' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:536:in `instance_eval' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:536:in `block in invoke' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:536:in `catch' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:536:in `invoke' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:388:in `call!' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:377:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/showexceptions.rb:24:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/methodoverride.rb:24:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/commonlogger.rb:18:in `call' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:928:in `block in call' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:973:in `synchronize' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:928:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/content_length.rb:13:in `call' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/chunked.rb:15:in `call' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/thin-1.2.7/lib/thin/connection.rb:76:in `block in pre_process' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/thin-1.2.7/lib/thin/connection.rb:74:in `catch' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/thin-1.2.7/lib/thin/connection.rb:74:in `pre_process' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/thin-1.2.7/lib/thin/connection.rb:57:in `process' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/thin-1.2.7/lib/thin/connection.rb:42:in `receive_data' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/eventmachine.rb:256:in `run_machine' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/eventmachine-0.12.10/lib/eventmachine.rb:256:in `run' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/thin-1.2.7/lib/thin/backends/base.rb:57:in `start' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/thin-1.2.7/lib/thin/server.rb:156:in `start' /Users/andoriyu/.gem/ruby/1.9.1/gems/rack-1.1.0/lib/rack/handler/thin.rb:14:in `run' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/base.rb:896:in `run!' /Users/andoriyu/.homebrew/Cellar/ruby/1.9.1-p378/lib/ruby/gems/1.9.1/gems/sinatra-0.9.6/lib/sinatra/main.rb:35:in `block in <top (required)>' !! Unexpected error while processing request: incompatible character encodings: ASCII-8BIT and UTF-8 <code>

Read the article

Know more about Cache Buffer Handle

- by Liu Maclean(???)

??????«latch free:cache buffer handles???SQL????»?????cache buffer handle latch?????,?????????: “?????pin?buffer header???????buffer handle,??buffer handle?????????cache buffer handles?,??????cache buffer handles??????,???????cache???buffer handles,?????(reserved set)?????????????_db_handles_cached(???5)???,?????????????????SQL??????????????????????,????pin??????,????????handle,?????????5?cached buffer handles???handle????????????????,Oracle?????????????????pin?”????“?buffer,????????????????handle???db_block_buffers/processes,????_cursor_db_buffers_pinned???????cache buffer handles?????,??????,????????????SQL,????cache?buffer handles?????????,??????????????,???????????/?????” ????T.ASKMACLEAN.COM????,??????cache Buffer handle?????: cache buffer handle ??: ------------------------------ | Buffer state object | ------------------------------ | Place to hang the buffer | ------------------------------ | Consistent Get? | ------------------------------ | Proc Owning SO | ------------------------------ | Flags(RIR) | ------------------------------ ???? cache buffer handle SO: 70000046fdfe530, type: 24, owner: 70000041b018630, flag: INIT/-/-/0×00(buffer) (CR) PR: 70000048e92d148 FLG: 0×500000lock rls: 0, class bit: 0kcbbfbp: [BH: 7000001c7f069b0, LINK: 70000046fdfe570]where: kdswh02: kdsgrp, why: 0BH (7000001c7f069b0) file#: 12 rdba: 0×03061612 (12/398866) class: 1 ba: 7000001c70ee000set: 75 blksize: 8192 bsi: 0 set-flg: 0 pwbcnt: 0dbwrid: 2 obj: 66209 objn: 48710 tsn: 6 afn: 12hash: [700000485f12138,700000485f12138] lru: [70000025af67790,700000132f69ee0]lru-flags: hot_bufferckptq: [NULL] fileq: [NULL] objq: [700000114f5dd10,70000028bf5d620]use: [70000046fdfe570,70000046fdfe570] wait: [NULL]st: SCURRENT md: SHR tch: 0flags: affinity_lockLRBA: [0x0.0.0] HSCN: [0xffff.ffffffff] HSUB: [65535]where: kdswh02: kdsgrp, why: 0 # Example:# (buffer) (CR) PR: 37290 FLG: 0# kcbbfbp : [BH: befd8, LINK: 7836c] (WAITING) Buffer handle (X$KCBBF) kernel cache, buffer buffer_handles Query x$kcbbf – lists all the buffer handles ???? _db_handles System-wide simultaneous buffer operations ,no of buffer handles_db_handles_cached Buffer handles cached each process , no of processes default 5_cursor_db_buffers_pinned additional number of buffers a cursor can pin at once_session_kept_cursor_pins Number of cursors pins to keep in a session When a buffer is pinned it is attached to buffer state object. ??? ???????? cache buffer handles latch ? buffer pin???: SESSION A : SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> create table test_cbc_handle(t1 int); Table created. SQL> insert into test_cbc_handle values(1); 1 row created. SQL> commit; Commit complete. SQL> select rowid from test_cbc_handle; ROWID ------------------ AAANO6AABAAAQZSAAA SQL> select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; T1 ---------- 1 SQL> select addr,name from v$latch_parent where name='cache buffer handles'; ADDR NAME ---------------- -------------------------------------------------- 00000000600140A8 cache buffer handles SQL> select to_number('00000000600140A8','xxxxxxxxxxxxxxxxxxxx') from dual; TO_NUMBER('00000000600140A8','XXXXXXXXXXXXXXXXXXXX') ---------------------------------------------------- 1610694824 ??cache buffer handles????parent latch ??? child latch ???SESSION A hold ??????cache buffer handles parent latch ???? oradebug call kslgetl ??, kslgetl?oracle??get latch??? SQL> oradebug setmypid; Statement processed. SQL> oradebug call kslgetl 1610694824 1; Function returned 1 ?????SESSION B ???: SQL> select * from v$latchholder; PID SID LADDR NAME GETS ---------- ---------- ---------------- ---------------------------------------------------------------- ---------- 15 141 00000000600140A8 cache buffer handles 119 cache buffer handles latch ???session A hold??,????????acquire cache buffer handle latch SQL> select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; T1 ---------- 1 ?????Server Process?????? read buffer, ????????"_db_handles_cached", ??process?cache 5? cache buffer handle ??"_db_handles_cached"=0,?process????5????cache buffer handle , ???? process ???pin buffer,???hold cache buffer handle latch??????cache buffer handle SQL> alter system set "_db_handles_cached"=0 scope=spfile; System altered. ????? shutdown immediate; startup; session A: SQL> oradebug setmypid; Statement processed. SQL> oradebug call kslgetl 1610694824 1; Function returned 1 session B: select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; session B hang!! WHY? SQL> oradebug setmypid; Statement processed. SQL> oradebug dump systemstate 266; Statement processed. SO: 0x11b30b7b0, type: 2, owner: (nil), flag: INIT/-/-/0x00 (process) Oracle pid=22, calls cur/top: (nil)/0x11b453c38, flag: (0) - int error: 0, call error: 0, sess error: 0, txn error 0 (post info) last post received: 0 0 0 last post received-location: No post last process to post me: none last post sent: 0 0 0 last post sent-location: No post last process posted by me: none (latch info) wait_event=0 bits=8 holding (efd=4) 600140a8 cache buffer handles level=3 SO: 0x11b305810, type: 2, owner: (nil), flag: INIT/-/-/0x00 (process) Oracle pid=10, calls cur/top: 0x11b455ac0/0x11b450a58, flag: (0) - int error: 0, call error: 0, sess error: 0, txn error 0 (post info) last post received: 0 0 0 last post received-location: No post last process to post me: none last post sent: 0 0 0 last post sent-location: No post last process posted by me: none (latch info) wait_event=0 bits=2 Location from where call was made: kcbzgs: waiting for 600140a8 cache buffer handles level=3 FBD93353:000019F0 10 162 10005 1 KSL WAIT BEG [latch: cache buffer handles] 1610694824/0x600140a8 125/0x7d 0/0x0 FF936584:00002761 10 144 10005 1 KSL WAIT BEG [latch: cache buffer handles] 1610694824/0x600140a8 125/0x7d 0/0x0 PID=22 holding ??cache buffer handles latch PID=10 ?? cache buffer handles latch, ????"_db_handles_cached"=0 ?? process??????cache buffer handles ??systemstate???? kcbbfbp cache buffer handle??, ?? "_db_handles_cached"=0 ? cache buffer handles latch?hold ?? ????cache buffer handles latch , ??? buffer?pin?????????? session A exit session B: SQL> select * from v$latchholder; no rows selected SQL> insert into test_cbc_handle values(2); 1 row created. SQL> commit; Commit complete. SQL> SQL> select t1,rowid from test_cbc_handle; T1 ROWID ---------- ------------------ 1 AAANPAAABAAAQZSAAA 2 AAANPAAABAAAQZSAAB SQL> select spid,pid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); SPID PID ------------ ---------- 19251 10 ? GDB ? SPID=19215 ?debug , ?? kcbrls ????breakpoint ??? ????release buffer [oracle@vrh8 ~]$ gdb $ORACLE_HOME/bin/oracle 19251 GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-37.el5) Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /s01/oracle/product/10.2.0.5/db_1/bin/oracle...(no debugging symbols found)...done. Attaching to program: /s01/oracle/product/10.2.0.5/db_1/bin/oracle, process 19251 Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libskgxp10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libskgxp10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libhasgen10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libhasgen10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libskgxn2.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libskgxn2.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocr10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocr10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocrb10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocrb10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocrutl10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocrutl10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libjox10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libjox10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libclsra10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libclsra10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libdbcfg10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libdbcfg10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libnnz10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libnnz10.so Reading symbols from /usr/lib64/libaio.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/libaio.so.1 Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/libm.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libm.so.6 Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done. [Thread debugging using libthread_db enabled] Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libnsl.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/libnsl.so.1 Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libnss_files.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libnss_files.so.2 0x00000035c000d940 in __read_nocancel () from /lib64/libpthread.so.0 (gdb) break kcbrls Breakpoint 1 at 0x10e5d24 session B: select * from test_cbc_handle where rowid='AAANPAAABAAAQZSAAA'; select hang !! GDB (gdb) c Continuing. Breakpoint 1, 0x00000000010e5d24 in kcbrls () (gdb) bt #0 0x00000000010e5d24 in kcbrls () #1 0x0000000002e87d25 in qertbFetchByUserRowID () #2 0x00000000030c62b8 in opifch2 () #3 0x00000000032327f0 in kpoal8 () #4 0x00000000013b7c10 in opiodr () #5 0x0000000003c3c9da in ttcpip () #6 0x00000000013b3144 in opitsk () #7 0x00000000013b60ec in opiino () #8 0x00000000013b7c10 in opiodr () #9 0x00000000013a92f8 in opidrv () #10 0x0000000001fa3936 in sou2o () #11 0x000000000072d40b in opimai_real () #12 0x000000000072d35c in main () SQL> oradebug setmypid; Statement processed. SQL> oradebug dump systemstate 266; Statement processed. ?????? kcbbfbp buffer cache handle ? SO state object ? BH BUFFER HEADER link??? ---------------------------------------- SO: 0x11b452348, type: 3, owner: 0x11b305810, flag: INIT/-/-/0x00 (call) sess: cur 11b41bd18, rec 0, usr 11b41bd18; depth: 0 ---------------------------------------- SO: 0x1182dc750, type: 24, owner: 0x11b452348, flag: INIT/-/-/0x00 (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 class bit: (nil) kcbbfbp: [BH: 0xf2fc69f8, LINK: 0x1182dc790] where: kdswh05: kdsgrp, why: 0 BH (0xf2fc69f8) file#: 1 rdba: 0x00410652 (1/67154) class: 1 ba: 0xf297c000 set: 3 blksize: 8192 bsi: 0 set-flg: 2 pwbcnt: 272 dbwrid: 0 obj: 54208 objn: 54202 tsn: 0 afn: 1 hash: [f2fc47f8,1181f3038] lru: [f2fc6b88,f2fc6968] obj-flags: object_ckpt_list ckptq: [1182ecf38,1182ecf38] fileq: [1182ecf58,1182ecf58] objq: [108712a28,108712a28] use: [1182dc790,1182dc790] wait: [NULL] st: XCURRENT md: SHR tch: 12 flags: buffer_dirty gotten_in_current_mode block_written_once redo_since_read LRBA: [0xc7.73b.0] HSCN: [0x0.1cbe52] HSUB: [1] Using State Objects ---------------------------------------- SO: 0x1182dc750, type: 24, owner: 0x11b452348, flag: INIT/-/-/0x00 (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 class bit: (nil) kcbbfbp: [BH: 0xf2fc69f8, LINK: 0x1182dc790] where: kdswh05: kdsgrp, why: 0 buffer tsn: 0 rdba: 0x00410652 (1/67154) scn: 0x0000.001cbe52 seq: 0x01 flg: 0x02 tail: 0xbe520601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x0 cc: 1 col 0: [ 2] c1 02 tab 0, row 1, @0x1f94 tl: 6 fb: --H-FL-- lb: 0x2 cc: 1 col 0: [ 2] c1 15 end_of_block_dump (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 st: XCURRENT md: SHR tch: 12 ? buffer header?status= XCURRENT mode=KCBMSHARE KCBMSHR current share ????? x$kcbbf ????? cache buffer handle SQL> select distinct KCBBPBH from x$kcbbf ; KCBBPBH ---------------- 00 00000000F2FC69F8 ==>0xf2fc69f8 SQL> select * from x$kcbbf where kcbbpbh='00000000F2FC69F8'; ADDR INDX INST_ID KCBBFSO_TYP KCBBFSO_FLG KCBBFSO_OWN ---------------- ---------- ---------- ----------- ----------- ---------------- KCBBFFLG KCBBFCR KCBBFCM KCBBFMBR KCBBPBH ---------- ---------- ---------- ---------------- ---------------- KCBBPBF X0KCBBPBH X0KCBBPBF X1KCBBPBH ---------------- ---------------- ---------------- ---------------- X1KCBBPBF KCBBFBH KCBBFWHR KCBBFWHY ---------------- ---------------- ---------- ---------- 00000001182DC750 748 1 24 1 000000011B452348 1081344 1 0 00 00000000F2FC69F8 00000001182DC750 00 00000001182DC750 00 00000001182DC7F8 00 583 0 SQL> desc x$kcbbf; Name Null? Type ----------------------------------------- -------- ---------------------------- ADDR RAW(8) INDX NUMBER INST_ID NUMBER KCBBFSO_TYP NUMBER KCBBFSO_FLG NUMBER KCBBFSO_OWN RAW(8) KCBBFFLG NUMBER KCBBFCR NUMBER KCBBFCM NUMBER KCBBFMBR RAW(8) KCBBPBH RAW(8) KCBBPBF RAW(8) X0KCBBPBH RAW(8) X0KCBBPBF RAW(8) X1KCBBPBH RAW(8) X1KCBBPBF RAW(8) KCBBFBH RAW(8) KCBBFWHR NUMBER KCBBFWHY NUMBER gdb ?? ?process??????kcbrls release buffer? ???cache buffer handle??? SQL> select distinct KCBBPBH from x$kcbbf ; KCBBPBH ---------------- 00

Read the article

SQL – Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB

- by Pinal Dave

Let us take a look at the application you own at your business. If you pay attention to the underlying database for that application you will be amazed. Every successful business these days processes way more data than they used to process before. The number of transactions and the amount of data is growing at an exponential rate. Every single day there is way more data to process than before. Big data is no longer a concept; it is now turning into reality. If you look around there are so many different big data solutions and it can be a quite difficult task to figure out where to begin. Personally, I have been experimenting with a lot of different solutions which allow my database to scale immediately without much hassle while maintaining optimal database performance. There are for sure some solutions out there, but for many I even have to learn their specific language and there is a lot of new exploration to do. Honestly, what I prefer is a product, which works with the language I know (SQL) and follows all the RDBMS concepts which I am familiar with (ACID etc.). NuoDB is one such solution. It is an operational NewSQL database built on a patented emergent architecture with full support for SQL and ACID guarantees. In this blog post, I will explore how one can download and install NuoDB database. Step 1: Follow me and go to the NuoDB download page. Simply fill out the form, accept the online license agreement, and you will be taken directly to a page where you can select any platform you prefer to install NuoDB. In my example below, I select the Windows 64-bit platform as it is one of the most popular NuoDB platforms. (You can also run NuoDB on Amazon Web Services but I prefer to install it on my local machine for the purposes of this blog). Step 2: Once you have downloaded the NuoDB installer, double click on it to install it on the Windows platform. Here is the enlarged the icon of the installer. Step 3: Follow the wizard installation, as it is pretty straight forward and easy to do so. I have selected all the options to install as the overall installation is very simple and it does not take up much space. I have installed it on my C drive but you can select your preferred drive. It is quite possible that if you do not have 64 bit Java, it will throw following error. If you face following error, I suggest you to download 64-bit Java from here. Make sure that you download 64-bit Java from following link: http://java.com/en/download/manual.jsp If already have Java 64-bit installed, you can continue with the installation as described in following image. Otherwise, install Java and start from with Step 1. As in my case, I already have 64-bit Java installed – and you won’t believe me when I say that the entire installation of NuoDB only took me around 90 seconds. Click on Finish to end to exit the installation. Step 4: Once the installation is successful, NuoDB will automatically open the following two tabs – Console and DevCenter — in your preferred browser. On the Console tab you can explore various components of the NuoDB solution, e.g. QuickStart, Admin, Explorer, Storefront and Samples. We will see various components and their usage in future blog posts. If you follow these steps in this post, which I have followed to install NuoDB, you will agree that the installation of NuoDB is extremely smooth and it was indeed a pleasure to install a database product with such ease. If you have installed other database products in the past, you will absolutely agree with me. So download NuoDB and install it today, and in tomorrow’s blog post I will take the installation to the next level. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

Read the article

WPF - How can I place a usercontrol over an AdornedElementPlaceholder?

- by Kevin

I'm trying to get the validation to not show through my custom modal dialog. I've tried setting the zindex of the dialog and and of the elements in this template. Any ideas? This is coming from a validation template: <ControlTemplate x:Key="ValidationTemplate"> <DockPanel> <TextBlock Foreground="Red" FontSize="20" Panel.ZIndex="-10">!</TextBlock> <Border Name="validationBorder" BorderBrush="Red" BorderThickness="2" Padding="1" CornerRadius="3" Panel.ZIndex="-10"> <Border.Resources> <Storyboard x:Key="_blink"> <ColorAnimationUsingKeyFrames AutoReverse="True" BeginTime="00:00:00" Storyboard.TargetName="validationBorder" Storyboard.TargetProperty="(Border.BorderBrush).(SolidColorBrush.Color)" RepeatBehavior="Forever"> <SplineColorKeyFrame KeyTime="00:00:1" Value="#00FF0000"/> </ColorAnimationUsingKeyFrames> </Storyboard> </Border.Resources> <Border.Triggers> <EventTrigger RoutedEvent="FrameworkElement.Loaded"> <BeginStoryboard Storyboard="{StaticResource _blink}" /> </EventTrigger> </Border.Triggers> <AdornedElementPlaceholder/> </Border> </DockPanel> </ControlTemplate> The dialog: <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" x:Class="GunMiser.Controls.PendingChangesConfirmationDialog" Height="768" Width="1024" mc:Ignorable="d"> <Grid Background="White"> <Rectangle x:Name="MainRectangle" Margin="0,0,0,0" Style="{DynamicResource UserControlOverlayRectangleStyle}" Opacity="0.85"/> <Border Margin="288,250,278,288" Background="#FF868686" BorderBrush="Black" BorderThickness="1"> <Border.Effect> <DropShadowEffect Color="#FFB6B2B2"/> </Border.Effect> <TextBlock x:Name="textBlockMessage" Margin="7,29,7,97" TextWrapping="Wrap" d:LayoutOverrides="VerticalAlignment" TextAlignment="Center"/> </Border> <Button x:Name="OkButton" Click="OkButton_Click" Margin="313,0,0,328" VerticalAlignment="Bottom" Height="24" Content="Save Changes" Style="{DynamicResource GunMiserButtonStyle}" HorizontalAlignment="Left" Width="103"/> <Button Click="CancelButton_Click" Margin="453.294,0,456,328" VerticalAlignment="Bottom" Height="24" Content="Cancel Changes" Style="{DynamicResource GunMiserButtonStyle}"/> <Button Click="CancelActionButton_Click" Margin="0,0,304,328" VerticalAlignment="Bottom" Height="24" Content="Go Back" Style="{DynamicResource GunMiserButtonStyle}" HorizontalAlignment="Right" Width="114.706"/> </Grid> </UserControl> And the overall window is: <Window x:Class="GunMiser.Views.Shell" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:cal="http://www.codeplex.com/CompositeWPF" xmlns:controls="clr-namespace:GunMiser.Controls;assembly=GunMiser.Controls" Title="Gun Miser" Height="768" Width="1024"> <Canvas> <controls:PendingChangesConfirmationDialog x:Name="PendingChangesConfirmationDialog" HorizontalAlignment="Stretch" Margin="0,0,0,0" VerticalAlignment="Stretch" Width="1008" Height="730" Visibility="Collapsed" Panel.ZIndex="100" /> <ContentControl x:Name="FilterRegion" cal:RegionManager.RegionName="FilterRegion" Width="326" Height="656" Canvas.Top="32" VerticalAlignment="Top" HorizontalAlignment="Left" /> <ContentControl Name="WorkspaceRegion" cal:RegionManager.RegionName="WorkspaceRegion" Width="678" Height="726" Canvas.Left="330" VerticalAlignment="Top" HorizontalAlignment="Left"/> <Button Click="GunsButton_Click" Width="75" Height="25" Content="Guns" Canvas.Top="3" Style="{DynamicResource GunMiserButtonStyle}"/> <Button Click="OpticsButton_Click" Width="75" Height="25" Content="Optics" Canvas.Left="81" Canvas.Top="3" Style="{DynamicResource GunMiserButtonStyle}"/> <Button Click="SettingsButton_Click" Width="56" Height="28" Content="Settings" Canvas.Left="944" Style="{DynamicResource GunMiserButtonStyle}" HorizontalAlignment="Left" VerticalAlignment="Top"/> <Button Click="AccessoriesButton_Click" Width="75" Height="25" Content="Accessories" Canvas.Left="239" Canvas.Top="3" Style="{DynamicResource GunMiserButtonStyle}"/> <Button Click="AmmunitionButton_Click" Width="75" Height="25" Content="Ammunition" Canvas.Left="160" Canvas.Top="3" Style="{DynamicResource GunMiserButtonStyle}"/> </Canvas> </Window>

Read the article

events not getting fired properly

- by prince23

hi, this is my xaml code. datagrid within another data grid. <sdk:DataGrid x:Name="dgLevel1" AutoGenerateColumns="False" VerticalAlignment="Top" IsReadOnly="True" Margin="12,12,0,0" RowDetailsVisibilityChanged="dgLevel1_RowDetailsVisibilityChanged" SelectionMode="Extended" RowDetailsVisibilityMode="VisibleWhenSelected" Height="412" HorizontalAlignment="Left" Width="816"> <sdk:DataGrid.Columns> <sdk:DataGridTemplateColumn> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate> <Button x:Name="myButton" Width="24" Height="24" Click="ExpandLevel1_Click"> <Image x:Name="imgLevel1" Source="Images/detail.JPG" Stretch="None"/> </Button> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> <sdk:DataGridTemplateColumn Header="Actual" Visibility="Collapsed"> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate > <sdk:Label Content="{Binding UniqueName}" /> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> <sdk:DataGridTextColumn Binding="{Binding Name}" Header="Name" Width="550" />  <sdk:DataGridTemplateColumn Header="Actual" Width="80" > <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate > <sdk:Label Content="{Binding Age}" /> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> </sdk:DataGrid.Columns> <sdk:DataGrid.RowDetailsTemplate> <DataTemplate> <StackPanel Width="805"> <sdk:DataGrid x:Name="dgLevel2" Width="797" Margin="17,0,0,0" HeadersVisibility ="None" AutoGenerateColumns="False" HorizontalAlignment="Center" IsReadOnly="True" RowDetailsVisibilityChanged="dgLevel2_RowDetailsVisibilityChanged" SelectionMode="Extended" RowDetailsVisibilityMode="VisibleWhenSelected"> <sdk:DataGrid.Columns> <sdk:DataGridTemplateColumn> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate> <Button x:Name="myButton" Width="24" Height="30" Click="ExpandLevel2_Click"> <Image x:Name="imgLevel2" Source="Images/detail.JPG" Stretch="None"/> </Button> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> <sdk:DataGridTextColumn Binding="{Binding School}" Width="528" /> <sdk:DataGridTextColumn Binding="{Binding College}" Visibility="Collapsed" /> <sdk:DataGridTemplateColumn Header="Actual" Width="80"> <sdk:DataGridTemplateColumn.CellTemplate> <DataTemplate > <sdk:Label Content="{Binding DOB}" /> </DataTemplate> </sdk:DataGridTemplateColumn.CellTemplate> </sdk:DataGridTemplateColumn> </sdk:DataGrid.Columns> </sdk:DataGrid> </StackPanel> </DataTemplate> </sdk:DataGrid.RowDetailsTemplate> </sdk:DataGrid> i have 2 data grid and have 2 image buttons in both the grid . but the event which is in datagrid ExpandLevel1 _Click and ExpandLevel2 _Click is not getting fired properly. some times get fired some times no when i click the button first this event gets fired then ExpandLevel1_Click then **dgLevel1_RowDetailsVisibilityChanged . same thing is happening for the datagrid 2 ExpandLevel2_Click then dgLevel2_RowDetailsVisibilityChanged** there are scenario where first datagrid event gets fired first then button click events why is this happening .is there any solution for this looking forward an solutions thanks in advance. prince

Read the article

How to get the child elementsvalue , when the parent element contains different number of child Elem

- by Subhen

Hi, I have the following XML Structure: <DIDL-Lite xmlns="urn:schemas-upnp-org:metadata-1-0/DIDL-Lite/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:upnp="urn:schemas-upnp-org:metadata-1-0/upnp/" xmlns:dlna="urn:schemas-dlna-org:metadata-1-0/"> <item id="1268" parentID="20" restricted="1"> <upnp:class>object.item.audioItem.musicTrack</upnp:class> <dc:title>Hey</dc:title> <dc:date>2010-03-17T12:12:26</dc:date> <upnp:albumArtURI dlna:profileID="PNG_TN" xmlns:dlna="urn:schemas-dlna-org:metadata-1-0">URL/albumart/22.png</upnp:albumArtURI> <upnp:icon>URL/albumart/22.png</upnp:icon> <dc:creator>land</dc:creator> <upnp:artist>sland</upnp:artist> <upnp:album>Change</upnp:album> <upnp:genre>Rock</upnp:genre> <res protocolInfo="http-get:*:audio/mpeg:DLNA.ORG_PN=MP3;DLNA.ORG_OP=01;DLNA.ORG_CI=0;DLNA.ORG_FLAGS=01700000000000000000000000000000" size="9527987" duration="0:03:58">URL/1268.mp3</res> <res protocolInfo="http-get:*:image/png:DLNA.ORG_PN=PNG_TN;DLNA.ORG_CI=01;DLNA.ORG_FLAGS=00f00000000000000000000000000000" colorDepth="24" resolution="160x160">URL/albumart/22.png</res> </item> <item id="1269" parentID="20" restricted="1"> <upnp:class>object.item.audioItem.musicTrack</upnp:class> <dc:title>Indian </dc:title> <dc:date>2010-03-17T12:06:32</dc:date> <upnp:albumArtURI dlna:profileID="PNG_TN" xmlns:dlna="urn:schemas-dlna-org:metadata-1-0">URL/albumart/13.png</upnp:albumArtURI> <upnp:icon>URL/albumart/13.png</upnp:icon> <dc:creator>MC</dc:creator> <upnp:artist>MC</upnp:artist> <upnp:album>manimal</upnp:album> <upnp:genre>Rap</upnp:genre> <res protocolInfo="http-get:*:audio/mpeg:DLNA.ORG_PN=MP3;DLNA.ORG_OP=01;DLNA.ORG_CI=0;DLNA.ORG_FLAGS=01700000000000000000000000000000" size="8166707" duration="0:03:24">URL/1269.mp3</res> <res protocolInfo="http-get:*:image/png:DLNA.ORG_PN=PNG_TN;DLNA.ORG_CI=01;DLNA.ORG_FLAGS=00f00000000000000000000000000000" colorDepth="24" resolution="160x160">URL/albumart/13.png</res> </item> <item id="1277" parentID="20" restricted="1"> <upnp:class>object.item.videoItem.movie</upnp:class> <dc:title>IronMan_TeaserTrailer-full_NEW.mpg</dc:title> <dc:date>2010-03-17T12:50:24</dc:date> <upnp:genre>Unknown</upnp:genre> <res protocolInfo="http-get:*:video/mpeg:DLNA.ORG_PN=(NULL);DLNA.ORG_OP=01;DLNA.ORG_CI=0;DLNA.ORG_FLAGS=01700000000000000000000000000000" size="98926592" resolution="1920x1080" duration="0:02:30">URL/1277.mpg</res> </item> </DIDL-Lite> Here in the last Elemnt Item , there are few missing elements like icon,albumArtURi ..etc. Now whhile Ity to access the Values by following LINQ to XML query, var vAudioData = from xAudioinfo in xResponse.Descendants(ns + "DIDL-Lite").Elements(ns + "item").Where(x=>!x.Elements(upnp+"album").l orderby ((string)xAudioinfo.Element(upnp + "artist")).Trim() select new RMSMedia { strAudioTitle = ((string)xAudioinfo.Element(dc + "title")).Trim(),//((string)xAudioinfo.Attribute("audioAlbumcoverImage")).Trim()=="" ? ((string)xAudioinfo.Element("Song")).Trim():"" }; It show object reference is not set to reference of object. I do undersrand this is because of missing elements, is there any way I can pre-check if the elements exist , or check the number of elemnts inside item or any other way. Any help is deeply appreciated. Thanks, Subhen

Read the article

Why does my performance increase when touching the screen?

- by Smills

For some reason my FPS jumps up considerably when I move my mouse around on the screen (on the emulator) while holding the left mouse button. Normally my game is very laggy, but if I touch the screen (and as long as I am moving the mouse around while touching) it goes perfectly smooth. I have tried sleeping for 20ms in the onTouchEvent, but it doesn't appear to make any difference. Here is the code I use in my onTouchEvent: // events when touching the screen public boolean onTouchEvent(MotionEvent event) { int eventaction = event.getAction(); touchX=event.getX(); touchY=event.getY(); switch (eventaction) { case MotionEvent.ACTION_DOWN: { touch=true; } break; case MotionEvent.ACTION_MOVE: { } break; case MotionEvent.ACTION_UP: { touch=false; } break; } /*try { AscentThread.sleep(20); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ return true; } In the logcat log, FPS is the current fps (average of the last 20 frames), touch is whether or not the screen is being touched (from onTouchEvent). What on earth is going on? Has anyone else had this odd behaviour before? Logcat log: 12-21 19:43:26.154: INFO/myActivity(786): FPS: 31.686569159606414 Touch: false 12-21 19:43:27.624: INFO/myActivity(786): FPS: 19.46310293212206 Touch: false 12-21 19:43:29.104: INFO/myActivity(786): FPS: 18.801202175690467 Touch: false 12-21 19:43:30.514: INFO/myActivity(786): FPS: 21.118295877408478 Touch: false 12-21 19:43:31.985: INFO/myActivity(786): FPS: 19.117397812958878 Touch: false 12-21 19:43:33.534: INFO/myActivity(786): FPS: 15.572571858239263 Touch: false 12-21 19:43:34.934: INFO/myActivity(786): FPS: 20.584119901503506 Touch: false 12-21 19:43:36.404: INFO/myActivity(786): FPS: 18.888025905454207 Touch: false 12-21 19:43:37.814: INFO/myActivity(786): FPS: 22.35722329083629 Touch: false 12-21 19:43:39.353: INFO/myActivity(786): FPS: 15.73604859775362 Touch: false 12-21 19:43:40.763: INFO/myActivity(786): FPS: 20.912449882754633 Touch: false 12-21 19:43:42.233: INFO/myActivity(786): FPS: 18.785278388997718 Touch: false 12-21 19:43:43.634: INFO/myActivity(786): FPS: 20.1357397209596 Touch: false 12-21 19:43:45.043: INFO/myActivity(786): FPS: 21.961138432007957 Touch: false 12-21 19:43:46.453: INFO/myActivity(786): FPS: 22.167196852834273 Touch: false 12-21 19:43:47.854: INFO/myActivity(786): FPS: 22.207318228024274 Touch: false 12-21 19:43:49.264: INFO/myActivity(786): FPS: 22.36980559230175 Touch: false 12-21 19:43:50.604: INFO/myActivity(786): FPS: 23.587638823252547 Touch: false 12-21 19:43:52.073: INFO/myActivity(786): FPS: 19.233902040593076 Touch: false 12-21 19:43:53.624: INFO/myActivity(786): FPS: 15.542190150440987 Touch: false 12-21 19:43:55.034: INFO/myActivity(786): FPS: 20.82290063974675 Touch: false 12-21 19:43:56.436: INFO/myActivity(786): FPS: 21.975282007207717 Touch: false 12-21 19:43:57.914: INFO/myActivity(786): FPS: 18.786927284103687 Touch: false 12-21 19:43:59.393: INFO/myActivity(786): FPS: 18.96879004217992 Touch: false 12-21 19:44:00.625: INFO/myActivity(786): FPS: 28.367566618064878 Touch: false 12-21 19:44:02.113: INFO/myActivity(786): FPS: 19.04441528684418 Touch: false 12-21 19:44:03.585: INFO/myActivity(786): FPS: 18.807837511809065 Touch: false 12-21 19:44:04.993: INFO/myActivity(786): FPS: 21.134330284993418 Touch: false 12-21 19:44:06.275: INFO/myActivity(786): FPS: 27.209688764079907 Touch: false 12-21 19:44:07.753: INFO/myActivity(786): FPS: 19.055894653261653 Touch: false 12-21 19:44:09.163: INFO/myActivity(786): FPS: 22.05422794901088 Touch: false 12-21 19:44:10.644: INFO/myActivity(786): FPS: 18.6956805300596 Touch: false 12-21 19:44:12.124: INFO/myActivity(786): FPS: 17.434180581311054 Touch: false 12-21 19:44:13.594: INFO/myActivity(786): FPS: 18.71932038510891 Touch: false 12-21 19:44:14.504: INFO/myActivity(786): FPS: 40.94571503868066 Touch: true 12-21 19:44:14.924: INFO/myActivity(786): FPS: 57.061200121138576 Touch: true 12-21 19:44:15.364: INFO/myActivity(786): FPS: 62.54377946377936 Touch: true 12-21 19:44:15.764: INFO/myActivity(786): FPS: 64.05005071818726 Touch: true 12-21 19:44:16.384: INFO/myActivity(786): FPS: 50.912951172948155 Touch: true 12-21 19:44:16.874: INFO/myActivity(786): FPS: 55.31242053078078 Touch: true 12-21 19:44:17.364: INFO/myActivity(786): FPS: 59.31625410615102 Touch: true 12-21 19:44:18.413: INFO/myActivity(786): FPS: 36.63504170925923 Touch: false 12-21 19:44:19.885: INFO/myActivity(786): FPS: 18.099130467755923 Touch: false 12-21 19:44:21.363: INFO/myActivity(786): FPS: 18.458978222946566 Touch: false 12-21 19:44:22.683: INFO/myActivity(786): FPS: 25.582179409330823 Touch: true 12-21 19:44:23.044: INFO/myActivity(786): FPS: 60.99865521942455 Touch: true 12-21 19:44:23.403: INFO/myActivity(786): FPS: 74.17873975470984 Touch: true 12-21 19:44:23.763: INFO/myActivity(786): FPS: 64.25663040460714 Touch: true 12-21 19:44:24.113: INFO/myActivity(786): FPS: 62.47483457826921 Touch: true 12-21 19:44:24.473: INFO/myActivity(786): FPS: 65.27969529547072 Touch: true 12-21 19:44:24.825: INFO/myActivity(786): FPS: 67.84743115273311 Touch: true 12-21 19:44:25.173: INFO/myActivity(786): FPS: 73.50854551357706 Touch: true 12-21 19:44:25.523: INFO/myActivity(786): FPS: 70.46432534585368 Touch: true 12-21 19:44:25.873: INFO/myActivity(786): FPS: 69.04076953445896 Touch: true

Read the article

arp problems with transparent bridge on linux

- by Mink

I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

Read the article

CD/DVD burn error in ImgBurn and Nero

- by bobby

I am getting the errors shown below when I try to burn a CD/DVD on my DVD writer. I am seeing this error for every CD/DVD I try to burn. I am not able to write any CDs or DVDs using ImgBurn. The burn log below is a failed burn in Nero. What could be causing this error? Nero Burning ROM bobby 4C85-200E-4005-0004-0000-7660-0800-35X3-0000-407M-MX37-**** (*) Windows XP 6.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.11.3. Internal Version: 7, 11, 3, (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-H12N> Version: UL01 - HA 1 TA 1 - 7.11.3.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <ATAPI-CD ROM-DRIVE-52MAX > Version: 52PP - HA 1 TA 0 - 7.11.3.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === === CDRom-Device-Map === ATAPI-CD ROM-DRIVE-52MAX F: CdRom0 HL-DT-ST DVDRAM GSA-H12N G: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 958MB (981560kB) Free physical memory: 309MB (317024kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.6.2010 CD Image 10:43:02 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:43:02 AM #2 Text 0 File Burncd.cpp, Line 3186 HL-DT-ST DVDRAM GSA-H12N Buffer underrun protection activated 10:43:02 AM #3 Text 0 File Burncd.cpp, Line 3500 Turn on Disc-At-Once, using CD-R/RW media 10:43:02 AM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 318783 ( 70:52.33) 10:43:02 AM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:43:02 AM #6 Text 0 File DlgWaitCD.cpp, Line 2988 Recorder: HL-DT-ST DVDRAM G SA-H12N; CDR co de: 00 97 27 18; O SJ entry from: Pla smon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A ( LO 79:59.74) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 0 0 00 (invalid) 10:43:02 AM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:43:02 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 785 Nero Report 1 Nero Burning ROM Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 318784 (318784) = #318784/70:50.34 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318784 blocks [G: HL-DT-ST DVDRAM GSA-H12N] -------------------------------------------------------------- 10:43:02 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [G: HL-DT-ST DVDRAM GSA-H12N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Se ssion Clo sed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next T rk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 6531768 32, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 318784 | 318784 | 0x00 318784 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:43:02 AM #10 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 10:43:02 AM #11 Text 0 File Burncd.cpp, Line 4286 Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB) 10:43:02 AM #12 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 10:43:02 AM #13 Text 0 File Burncd.cpp, Line 4405 Cache writing successful. 10:43:02 AM #14 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 10:43:02 AM #15 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 48x (7,200 KB/s) 10:43:02 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2733 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:43:02 AM #17 Text 0 File MMC.cpp, Line 17806 StartDAO : CD-Text - Off 10:43:02 AM #18 Text 0 File MMC.cpp, Line 22488 Set BUFE: Buffer underrun protection -> ON 10:43:03 AM #19 Text 0 File MMC.cpp, Line 18034 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 46 34 22 10:43:03 AM #20 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 83836800 10:43:16 AM #21 Text 0 File Cdrdrv.cpp, Line 1405 10:43:16.806 - G: HL-DT-ST DVDRAM GSA-H12N : Queue again later 10:43:42 AM #22 SPTI -1502 File SCSIPassThrough.cpp, Line 181 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1502) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Nero Report 2 Nero Burning ROM Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 4D 00 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 10 53 29 A1 80 08 03 Buffer x0c7d9a40: Len x10000 0xDC 87 EB 41 6E AC 61 5A 07 B2 DB 78 B5 D4 D9 24 0x8D BC 51 38 46 56 0F EE 16 15 5C 5B E3 B0 10 16 0x14 B1 C3 6E 30 2B C4 78 15 AB D5 92 09 B7 81 23 10:43:42 AM #23 CDR -1502 File Writer.cpp, Line 306 DMA-driver error, CRC error G: HL-DT-ST DVDRAM GSA-H12N 10:43:55 AM #24 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 48x (7,200 KB/s) 10:43:55 AM #25 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:44:01 AM #26 Text 0 File Cdrdrv.cpp, Line 11412 DriveLocker: UnLockVolume completed 10:44:01 AM #27 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon Nero Report 3

Search Results

Search found 24515 results on 981 pages for '24 bit'.

Page 137/981 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144 | Next Page >

- by Derek Pressnall

- by jdgregson

- by user288501

- by Piet

- by danx

- by danx

- by Simon

- by lina

- by Geoff N. Hiten

- by jehan

- by Adrian Grigore

- by Skilldrick

- by rubenvb

- by Bergius

- by Ngu Soon Hui

- by ManniAT

- by user292815

- by Liu Maclean(???)

- by Pinal Dave

- by Kevin

- by prince23

- by Subhen

- by Smills

- by Mink

- by bobby

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144 | Next Page >