Search Results

Search found 7209 results on 289 pages for 'names'.

Page 137/289 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• Unexpected network traffic?

  - by robwalker

  My internet connection is via a fixed wireless connection using a 900MHz Motorola Canopy module. The router reports a fairly consistent 32-64Kbps of incoming traffic on the WAN port. When I attached a PC directly to the port and run Wireshark, I get a dump showing a lot of chatter from other machines that I presume are connected to the same tower. This didn't include end-to-end traffic, but was there were a lot of ARP requests, SSDP traffic, ICMP and other network discovery type stuff. Is this 'normal' or does it suggest a misconfiguration somewhere? As far as I can tell there is no need for my modem to be receiving any of this traffic (other than wanting to know what the names of my neighbours machines and printers are!) Since the internet connection is slow at the best of time, having this amount of background noise seems very wasteful.

  Read the article

• Can't access shared drive when connecting over VPN

  - by evolvd

  I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

  Read the article

• disable 250 character URL limit in Internet Explorer

  - by Keltari

  Users of a SharePoint Document Library are getting this error: The URL for this file is too long for the application. A temporary copy of this file will be opened on your computer. You must save this copy as a new file. After doing some research, it appears Internet Explorer has a limit of about ~250 characters for a URL. Some URLs provided by SharePoint far exceed this limit. One example being 790 characters long. Is there a way to disable this limit? I have looked, but there doesnt appear to be a solution, other than shortening the folder/path names.

  Read the article

• Does an SMTP request contain host header information (or just the IP of the targeted SMTP server)?

  - by Olaf

  We are using an external commercial smtp server for our newsletters (sending them through .NET components), and they offer two smtp URLs - smtp.critsend.com and fast.critsend.com -, and the second one is reserved for sending singular emails, the first one for bulk. Using nslookup shows that both resolve to the same 4 IP addresses (fast.critsend.com being an Alias). Question: (how) is it possible for the smtp relay to distinguish between different names? Is there something in the headers that can be compared to host headers in http protocol (I didn't find any intelligible information for a non-sysadmins)? The reason I'm asking is because we would like to use one of the IPs in our newsletter script (which works) rather than a name (in order to save DNS requests), and we are wondering about potential problems.

  Read the article

• Run Bash Script Another Server

  - by psce

  I want to run command one by one, for change the names of the directories on the server. When I run script, directories renamed in server 1. But, directories are not found in server 2. What the error could be in the script? Script; #!/bin/bash mach_directory=/home/user/example erase_dir1=cache erase_dir2=tmp for i in {0..10} do user=user server=$(ssh $user@server$i hostname) ssh $user@$server find $mach_directory -type d -name $erase_dir1 ! -path "*Admin/$erase_dir1*" -print0 | while IFS= read -r -d '' file ; do mv "$file" "${file}_$(date +%d%m%Y)"; done ssh $user@$server find $mach_directory -type d -name $erase_dir2 ! -path "*Admin/$erase_dir2*" -print0 | while IFS= read -r -d '' file ; do mv "$file" "${file}_$(date +%d%m%Y)"; done done

  Read the article

• Scheduled service/script/batch file to move files on condition of other files with similar filenames in same directory on windows

  - by ilasno

  On Windows Server (Data Center? 2008?), i'm trying to set up a scheduled task that will: Within a particular directory For every file in it If there exists (in the same directory) 2 files with similar names (actually the same name with extra extensions tagged on, ie. 'file1.mov' would need both 'file1.mov.flv' AND 'file1.mov.mpg' to exist), then move the file to another directory on a different disk. Following is what i have so far for a batch file, but i'm struggling. I'm also open to another technique/mechanism. @setlocal enableextensions enabledelayedexpansion @echo off SET MoveToDirectory=M:\_SourceVideosFromProduction ECHO MoveToDirectory=%MoveToDirectory% pause for /r %%i in (*) do ( REM ECHO %%i REM ECHO %%~nxi REM ECHO %%~ni REM ECHO filename=%filename% REM SET CurrentFilename=%%~ni REM ECHO CurrentFilename=%CurrentFilename% IF NOT %%~ni==__MoveSourceFiles ( IF NOT x%%%~ni:\.=%==x%%%~ni% DO ( REM SET HasDot=0 REM FOR /F %%g IN %filename% do ( REM IF %%g==. ( ECHO %filename% REM ) ) ) ) pause

  Read the article

• Automatically detect faces in a picture

  - by abel

  At my work place, passport sized photographs are scanned together, then cut up into individual pictures and saved with unique file numbers. Currently we use Paint.net to manually select, cut and save the pictures. I have seen Sony's Cybershot Camera has face detection. Google also gives me something about iphoto when searching for face detection. Picasa has facedetection too. Are there any ways to autodetect the faces in a document, which would improve productivity at my workplace by reducing the time needed to cut up individual images. Sample Scanned Document(A real document has 5 rows of 4 images each=20 pics): (from: http://www.memorykeeperphoto.com/images/passport_photo.jpg, fairuse) For eg. In Picasa 3.8, On clicking View People, all the faces are shown and I am asked to name them, can I save these individual pictures automatically with the names as different pictures.

  Read the article

• Excel - graphing mean and standard deviation

  - by joe_shmoe

  Hi all, I have measurements for multiple devices, and have their mean and sd values. I would like to produce a chart that would show these values, and I think the best would be if I could have something that looks like a bar chart(-ish) - the device names in x axis, values in y axis, and for each device to have a 'floating' bar that would represent values (mean - sd :: mean + sd), and some marker in the middle to show the actual mean value. is it doable? or would you suggest some other chart? Thanks a lot

  Read the article

• Sun Java keytool importing EV certificates into a single keystore

  - by ss0

  At my current job we are using tomcat, customers have custom web portals setup on their own local machines. EV certs are new to me, they have 2 part intermediary and a primary certificate. For our product to work it appears I need to get all three parts installed under a single keystore entry. How can I roll all three parts into a single x.509 compliant file for import? They syntax I am using is as follows: /blah/system/j2sdk/bin/keytool -import -alias foo -keystore /zix/system/jdk1.5.0_06/jre/lib/security/cacerts -file certname.pem -trustcacerts where foo = the keystore name and certname.pem is the main cert. I have tried importing the intermediate certs under their own names into the keystore and I don't know if it's just the product I have to work with (not vanilla tomcat) or what but it doesn't see those. I have seen a working system and all three certs were under the single keystore alias. Anyone have any ideas?

  Read the article

• Cannot set target directory when extracting an archive using tar

  - by palto

  I'm trying to extract a tar archive to a specific directory. I've tried using -C flag but it doesn't work as expected. Here is the commandline I'm using tar xvf myarchive.tar -C mydirectory/ This gives me a following error: tar: file -C: not present in archive tar: file mydirectory/: not present in archive I've also tried setting the -C flag before the archive file but it just says this: tar xvf -C mydirectory/ myarchive.tar tar: -C: No such file or directory What am I doing wrong? EDIT: tar -tf shows that the tar archive does not have full path names: tar -tf myarchive.tar herareport/ herareport/bin/ ...

  Read the article

• Help me to set samba and apache on my Ubuntu VM from Vista, starting from ping

  - by avastreg

  Ok the title is not so clear after all, so let's start with the problem description posting some points: i'm on Win Vista i have a Virtual Box Ubuntu 9.04 server (Virtual Machine) installed in windows i'm under Active Directory (maybe helps), with network 192.168.2.x After Ubuntu installation (LAMP), i have: Ubuntu Ip set to 10.0.2.15 (dhcp) Vista pings Ubuntu and Ubuntu pings Vista (only IPs, not names) Can't connect to Apache (default install ubuntu server) at the url h**p://10.0.2.15/ On Ubuntu, testing Apache by doing 'wget http://10.0.2.15/' works Tried to setup samba, writing a share def, but nothing, i can't access from Vista to Ubuntu My scope is: Setting up samba to work on files from windows Reaching apache to test web pages Ok i'm not completely noob (but i'm on the noob way anyway) and i've tried many solutions, so please try to help me; let's look together what went wrong :)

  Read the article

• A network share folder is invisible to users

  - by Myrddin Emrys

  I have a network share folder that I was recently cleaning up permissions to. I took off the four individual names from the access permissions to the folder, and added a new security group (Universal) with standard Read/Write permissions to that folder, then added those 4 people to the group. However... now nobody can see the folder. The users can see the other 9 folders in that shared drive, but the 10th is missing. I cannot see any security permission in the parent folder or in the folder itself which would cause it to be invisible to anyone, regardless of whether they have permission to open it or edit files within.

  Read the article

• After updating debian lenny, ps stops recognising my users

  - by William Coates

  Since upgrading my debian lenny box with apt-get, ps seems to be behaving strangely, and also if i run top i see under the user column the ids, not the names. whoami => foo ps -U foo => ERROR: User name does not exist. I get this output when I run "strace -e trace=open ps -U foo 2&1 | less", seems just this /usr/lib/libnss_compat.so.2 doesnt exist: open("/etc/mtab", O_RDONLY) = 3 open("/usr/lib/locale/locale-archive", O_RDONLY|O_LARGEFILE) = 3 open("/proc/self/stat", O_RDONLY) = 3 open("/proc/uptime", O_RDONLY) = 3 open("/etc/nsswitch.conf", O_RDONLY) = 4 open("/etc/ld.so.cache", O_RDONLY) = 4 open("/lib/libnss_compat.so.2", O_RDONLY)=4 open("/usr/lib/libnss_compat.so.2", O_RDONLY)=-1 ENOENT (No such file or directory) open("/proc/self/stat", O_RDONLY)= 4

  Read the article

• ISPConfig - Unexisting subdomain address goes to an existing one

  - by xperator

  I am running Nginx/ISPConfig setup for about 6-7 months. Never had a problem and everything is smooth. But I just noticed that if browse to "blab.example.com", the page opens one of my wordpress blogs on the other domain. No matter what name I use for subdomain, Anything that I enter randomly "b53ks.example.com" still goes to that blog page. I have 3 or 4 different domain names and websites on the same server. But I think I misconfigured somewhere and that might be the cause of this. Lets say I have these domains: example-1.com, example-2.com, another-example.com If I go to anything.example-1.com or serverfault.example-2.com, or google.another-example.com the returned page is my blog at blog.example-1.com Note : I didn't set any subdomain in ISPConfig. Instead, I used "Add new website" for making a subdomain.

  Read the article

• Does Windows 7 support multiple simultaneous nVidia graphics cards with different drivers?

  - by mckenzieg1

  On one of my dev machines at work (currently running XP), I have two nVidia graphics cards: Quadro NVS 440 (my original card, for my three primary monitors) GeForce GTX 275 (just added, for CUDA development) I can get both cards to work OK by installing the latest GeForce drivers, but I get some annoying-but-not-crippling display artifacts on the Quadro's screens (mostly scattered black rectanges where repainting fails for a few bits of UI in certain applications). Under XP, this seems to be the best I can do. I can use Device Manager to supposedly install different nVidia drivers for the two cards (the latest Quadro drivers for the NVS, the latest GeForce drivers for the GTX), but I actually end up with the same driver for both, because the driver dlls all have the same names and get installed on top of one another in the system directory. I have read that Win7 has a new video driver architecture that better supports multiple heterogeneous cards. Does anyone know if that will handle my scenario? If so, it will give me a compelling reason to get that machine on Win7 ASAP.

  Read the article

• What is needed to invoke LibreOffice running just the macro without the GUI?

  - by C.W.Holeman II

  Invoking LibreOffice and running a macro via the GUI works as expected producing three HTML files, one for each spreadsheet page: $ libreoffice x.ods Tools>Macros>Run Macros... Library: LibreOffice Macros> ExportSheetsToHTML Macro Names: exportsheetstohtml.js Run When attempting to invoke just the macro it just hangs: $ libreoffice\ -invisible\ -nofirststartwizard\ -headless\ -norestore\ x.ods "macro:///LibreOffice Macros.ExportSheetsToHTML.exportsheetstohtml.js" $ ps x | grep libreoffice 11286 pts/0 S+ 0:00 /bin/sh /opt/libreoffice/program/soffice -invisible -nofirststartwizard -headless -norestore x.ods macro:///LibreOffice Macros.ExportSheetsToHTML.exportsheetstohtml.js 11296 pts/0 Sl+ 0:58 /opt/libreoffice/program/soffice.bin -invisible -nofirststartwizard -headless -norestore x.ods macro:///LibreOffice Macros.ExportSheetsToHTML.exportsheetstohtml.js Version info: Linux road 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 i686 GNU/Linux LibreOffice 3.3.0 OOO330m19 (Build:6) tag libreoffice-3.3.0.4

  Read the article

• Adding a second IP address for IIS - static vs dynamic A records

  - by serialhobbyist

  I'm looking to add a second IP address to IIS so that I can run two sites with different SSL certificates. When I added one on my play box and ran ipconfig /registerdns both addresses were registered in DNS with the server's name. So, I deleted the A record for the new IP address and rebooted. That also registered both names. So, then I went into the network config for the adapter and, on the DNS tab, unchecked "Register this connection's addresses in DNS". I deleted the A record for the new IP address again and re-ran ipconfig /registerdns. This time, it deleted the A record for the old IP address and didn't created one for the new address. Neither of these is what I want: I want the main IP address to be registered and refreshed automatically as a dynamic DNS record and the second IP address to be registered and managed as a static address. Is there any way to achieve this?

  Read the article

• What is the correct cipher name for RC4 in Chrome?

  - by qbi

  I want to remove RC4 from Google Chrome and found the commandline option --cipher-suite-blacklist. However I wasn't able to figure out what the correct notation for RC4 is. Whatever I tried so far only brought the message: ERROR:ssl_config_service_manager_pref.cc(55)] Ignoring unrecognized or \ unparsable cipher suite: Even the names listed in ssl_cipher_suite_names.cc don't work. What should I enter to remove RC4 as a cipher for SSL/TLS? I'm working with some different versions of GNU/Linux and sometimes also with Windows. So it would be nice if the command-line argument would work under all OSes. I used the following command: chrome --cipher-suite-blacklist=TLS_RSA_WITH_RC4_128_MD5 --ssl-version-min=tls1.1 chrome --cipher-suite-blacklist=RC4 --ssl-version-min=tls1.1 chrome --cipher-suite-blacklist=0xXYZ,0xUVW --ssl-version-min=tls1.1 # XYZ and UVW are some hexadecimal numbers

  Read the article

• qmail questions - whitelisting and relays

  - by Richard

  My new server runs qmail, which I've never used before. There is no inbound mail on the server (all the clients have mail hosted elsewhere, but some systems on the server send mail. I'm about to move a client there who has several parked domains, and looking at the smtp log, the server is already blocking many attempts to relay spam using one of the parked domain names (probably because a related domain is already hosted there). How do I ensure those mails stay blocked, while allowing legitimate addresses to send out? Server OS is CentOS and hosting software is Kloxo.

  Read the article

• Naming standard for additional A records/IP addresses for IIS servers?

  - by serialhobbyist

  When you're adding another IP address to and IIS server, what naming standards do you use for the A records? Background: I've a bunch of sites on an IIS server which use (CNAME'd) host-headers and a single IP address. Server names (and A records) adhere to unfriendly (as in difficult-to-remember) naming standards whereas CNAMEs, and therefore host-headers, can be friendly. Now I've a need for several SSL certificates for different sites. I was thinking about using an additional IP address for each to-be-SSL'd site but still using friendly CNAMEs. So then I come to what to call the A record. What do you do? Related to this question.

  Read the article

• Export and import a PostgreSQL database with a different name?

  - by J. Pablo Fernández

  Is there a way to export a PostgreSQL database and later import it with another name? I'm using PostgreSQL with Rails and I often export the data from production, where the database is called blah_production and import it on development or staging with names blah_development and blah_staging. On MySQL this is trivial as the export doesn't have the database anywhere (except a comment maybe), but on PostgreSQL it seems to be impossible. Is it impossible? I've seen out there some people using sed scripts to modify the dump. I'd like to avoid that solution but if there are no alternative I'll take it. Has anybody wrote a script to alter the dump's database name ensure no data is ever altered?

  Read the article

• Populating cells with data from another spreadsheet after just keying in a few letters

  - by Wendy Griffin

  I have 1 workbook with 2 spreadsheets. Spreadsheet 2 column A contains a long list of company names, Columns B - H contain critical information about the company. Spreadsheet 1 contains all of the columns as Spreadsheet 2 plus some other columns. What I'm trying to achieve is that when you start to type in the first 3 characters of a company name on Spreadsheet 1 it would then have a drop down of the companies (as listed on Spreadsheet 2) that share the first 3-5 letters and you would select one. Upon selecting a company name all of the corresponding company information would populate in the other columns on spreadsheet 1 automatically. This is to avoid copying a row from Spreadsheet 2 and pasting it in Spreadsheet 1. Any help with this would be greatly appreciated. Cheers!

  Read the article

• Virtualhost setup, same IP address, different DirectoryIndex's

  - by kaykills

  I am trying to set up 2 virtual host entries in apache but I'm not sure how to accomplish what I want to do. I have two domain names, both pointing to the same IP Address. I need the DirectoryIndex to be different, which is pretty much the only difference in the entries. I have the following set up: <VirtualHost *:80> ServerName firstdomain.com ServerAdmin [email protected] DocumentRoot "/srv/www" DirectoryIndex /portals/site/index.html </VirtualHost> <VirtualHost *:80> ServerName seconddomain.com ServerAdmin [email protected] DocumentRoot "/srv/www" DirectoryIndex /portals/site/index_fr.html </VirtualHost> Not sure what I need to do differently but the second entry doesn't work. The only real difference is I need the second domain to point to a different DirectoryIndex. If there is a better way to accomplish this, your help would be appreciated.

  Read the article

• create video from jpg images using ffmpeg

  - by floppydisk

  I want to make short timelapse video using ffmpeg under ubuntu 12.04 LTS. I have a folder containing all images with names DSC_0000.jpg DSC_0001.jpg and so on. I found this question ffmpeg: create a video from images and I try to run the same command as mentioned there: ffmpeg -i DSC_%d.jpg -vcodec mpeg4 timelapse.avi and it fails with DSC_%d.jpg: No such file or directory I've also tried ffmpeg -i DSC_%04d.jpg -vcodec mpeg4 timelapse.avi and it fails with the same error And also for some reason my ffmpeg does not understand option -start_number, if I run ffmpeg -start_number 0 -i DSC_%d.jpg -vcodec mpeg4 timelapse.avi I get this error: Unrecognized option 'start_number' Failed to set value '0' for option 'start_number' I would appreciate any help

  Read the article

• multiple domains, one static IP address and latency

  - by shirish

  how is latency affected when multiple domains are using one single static IP address ? The scenario is in shared web-hosting By latency meaning the DNS lookup the client has to do. As far as I understand it, the browser would hit the root servers to try to figure out the IP Address and it belongs where and then when it comes to the correct server, it probably looks up some sort of table to determine which site names much and show that site as such via browser to the user. Is my understanding correct or backwards or what ?

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >