Search Results

Search found 4769 results on 191 pages for 'nirmal ram'.

Page 137/191 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• Installing Ubuntu Server 12.04 as a software RAID 1 mirror fails to boot

  - by Jeff Atwood

  I'm installing a few new Ubuntu Server 12.04 LTS servers, and they have two 512 GB SSDs. I want them to use software RAID 1 mirroring, so I was following this document religiously step by step: https://help.ubuntu.com/12.04/serverguide/advanced-installation.html To summarize the above official documentation: to set up a software RAID 1 mirror in Ubuntu Server, you choose manual partitioning during the setup, and do this on each drive: "swap" partition of roughly RAM size "physical volume for RAID" partition for remaining drive size After that, you set up the RAID 1 mirror using the RAID partitions on drive A and B, make it ext4 and containing the root filesystem partition. Setup continues from there just fine. One caveat: I was completely unable to select the "physical volume for RAID" as bootable. When I tried to do that in setup, it had no effect: I could press enter on the "make bootable" option all day long and nothing would ever change. However, after install successfully completes, I have a big problem: the system won't boot! I get Reboot and Select proper boot device or Insert Boot Media in selected Boot device and press a key What did I do wrong? Why can't I mark that "physical volume for RAID" partition bootable during Ubuntu Server setup? Is there some way for me to make the physical volumes for RAID bootable after the fact, perhaps from a live CD or something?

  Read the article

• Is the Alternate Ubuntu installer still required for LVM or Software RAID setup?

  - by jimp

  Over the past 5 years, I have been setting up Ubuntu servers using the Alternate installer. I need to provision a new server today, and I'm curious if the Alternate CD is still the only way to setup LVM/RAID at installation time. I'm my limited experience with Red Hat Enterprise Linux, I noticed it's single installer configures LVM automatically. Has Ubuntu's installer, at least the standard "Server" installer, added support for LVM/RAID, or is the Alternate installer still required for that kind of server setup? http://mirror.anl.gov/pub/ubuntu-iso/DVDs/ubuntu/12.04.1/release/ Alternate install CD The alternate install CD allows you to perform certain specialist installations of Ubuntu. It provides for the following situations: setting up automated deployments; upgrading from older installations without network access; LVM and/or RAID partitioning; installs on systems with less than about 384MiB of RAM (although note that low-memory systems may not be able to run a full desktop environment reasonably). LVM has always been fundamental for our server needs, so I'm surprised if it is still not considered a server-worthy feature.

  Read the article

• How do I debug an overheating problem?

  - by Tab

  Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

  Read the article

• How to install Ubuntu 12.04.1 in EFI mode with Encrypted LVM?

  - by g0lem

  I'm trying to properly install Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with the alternate install CD ".iso" on a lenovo Thinkpad X220. Default Hard Disk (with a pre-installed version of Windows 7) has been replaced with a brand new SSD. The UEFI BIOS of the lenovo Thinkpad X220 is set to "UEFI Boot only" & "USB UEFI BIOS Support" is enabled (I'm using an external USB DVD reader to perform Ubuntu installation). The BIOS is a Phoenix SecureCore Tiano, BIOS version is 8DET56WW (1.26). The attempts below are made with the UEFI BIOS settings described above. Here's what I've tried so far: Boot on a live GParted CD Create a GPT partition table Create a FAT32 partition for UEFI System, set the partition to "EF00" type ("boot" flag) Leave remaining space unformated Boot on Ubuntu 12.04.1 LTS 64-bit PC (AMD64) with alternate CD: Perform the install with network updates enabled Use manual partitioning FAT32 partition created with GParted is used as "EFI System partition" Remaining space is set to be used as "Physical volume for LVM" Then "Configure encrypted volumes" using the previous "Physical volume for LVM" as the encrypted container, passphrase is setup. "Configure the Logical Volume Manager" creating a volume Group using the encrypted container /dev/mapper/sda2_crypt Creation of the Logical Volumes "Create logical volume", choosing the previously created volume Group Assign a mount point and file system to the Logical volumes : LV-root for / LV-var for /var LV-usr for /usr LV-usr-local for /usr/local LV-swap for swap LV-home for /home NOTE: /tmp would be in RAM only using TMPFS Bootloader step: neither my ESP partition (/dev/sda1, /dev/sda or MBR) seems to be the right place for GRUB, I get the following message (X suffix is for demonstration only): unable to install grub in /dev/sdaX Executing 'grub-install /dev/sdaX' failed This is a fatal error. Finish installation without the Bootloader & Reboot The system doesn't start, there's no EFI/GRUB menu at startup. What are the steps to perform a clean and working installation of Ubuntu 12.04.1 Precise Pangolin, 64bit version in U(EFI) mode using the encrypted LUKS + LVM scheme described above?

  Read the article

• Logitech C510 HD Webcam related question

  - by Ashfame

  I am going to buy Logitech C510 HD webcam and I just checked on other questions here on AskUbuntu that it works out of the box with cheese. My question is can it be limited in any functionality that I would like to do with it? I would like it to be used with everything - Skype, Gtalk video chat, Facebook, Youtube etc I would like the ability to record or do a video call in lesser resolution video (its a 720p one). Also since I read that I should have a Core2Duo 2.2Ghz for 720p but I have a 2.0Ghz one, would it be possible for me to first record it and then encode it after recording if my processor really start giving issue when doing on-the-fly encoding? Anything else that I should consider? I also have a ATI HD 4850 512MB card, if it can help in encoding on-the-fly or is there a chance that my graphics card alone can handle it and those specs were just for a system without a graphics card? I believe so. Also, I got no worries in dealing with console, if I have to do some of the things above in terminal. Other possible significant details: I have a dual screen setup 29" (1360X768) & 22" (1680X1050) which might be using some good power from GPU and I have 2GB DDR2 800Mhz RAM.

  Read the article

• Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

  - by Giuseppe Della Corte

  I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

  Read the article

• Ubuntu 12.04 slow boot on ASUS, attached with dmesg and bootchart

  - by stanleyhunk

  I heard that Ubuntu can boot up around 30sec, but I take more than 60sec every time my Ubuntu boot. I also read some forum said need to post the dmesg and bootchart to identify which process slowing down the booting time, as I'm not expert in Ubuntu and wish to learn more about it, I humbly ask any pro here to teach me how. My laptop specs: Model : ASUS K45VS RAM : 8MB CPU : Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz x 8 Graphic Card : nVidia GeForce GT 645M HDD : 750GB OS : Single boot Ubuntu 12.04LTS System.uname : Linux 3.8.0-39-generic #58~precise1-Ubuntu SMP Fri May 2 21:33:40 UTC 2014 x86_64 System.release : Ubuntu 12.04.4 LTS System.kernel.options : BOOT_IMAGE=/boot/vmlinuz-3.8.0-39-generic root=UUID=c8a71503-bce8-406c-9a5f-5aa8284f5c7c ro quiet splash My dmesg (which highlighted to the huge time frame gap): [ 30.772656] cgroup: libvirtd (1961) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772659] cgroup: "memory" requires setting use_hierarchy to 1 on the root. [ 30.772683] cgroup: libvirtd (1961) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 30.772710] cgroup: libvirtd (1961) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 32.140335] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X [ 32.505619] ACPI Error: Field [TMPB] at 1081344 exceeds Buffer [ROM1] size 262144 (bits) (20121018/dsopcode-236) [ 32.505624] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP._ROM] (Node ffff880224e91f00), AE_AML_BUFFER_LIMIT (20121018/psparse-537) [ 802.034422] audit_printk_skb: 69 callbacks suppressed [ 802.034428] type=1400 audit(1400914804.392:35): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" [ 1581.300901] type=1400 audit(1400915584.816:36): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=1683 comm="cupsd" pid=1683 comm="cupsd" capability=36 capname="block_suspend" My Bootchart.png: Looking forward to learn to improve both my booting time and knowledge. Thanks in advance :)

  Read the article

• If you develop on multiple operating systems, is it better to have multiple computers + displays?

  - by dan

  I develop for iOS and Linux. My preferred OS is Ubuntu. Now my software shop (me and a partner) is developing for Windows too. Now the question is, is it more efficient to have multiple workstations, one for each target OS? Efficiency and productivity is a higher priority than saving money. I have a 3.4Ghz i7 desktop workstation running Ubuntu and virtualized Windows with two displays, and I'm putting together an even more powerful i7 Hackintosh with 16GB RAM (to replace my weak 2.2Ghz i5 Macbook Pro). My specific dilemma is whether I should sell the first computer and triple boot on the second one, or buy two more displays and run both desktop systems simultaneously. Would appreciate answers from developers who write software for multiple OSes. Running guest OSes in VirtualBox on one system not ideal, because in my experience performance is seriously degraded under virtualization. So the choice is between dual/triple booting on one system vs having two systems, one for OSX+iOS/Windows (dual boot) and the other for Ubuntu (which I prefer to use as my main OS). For much of our work, I write a server-side application in Linux and a client for iOS (or for Windows or OS X) simultaneously.

  Read the article

• ksoftirqd uses 100% cpu

  - by andy

  I am running 32bit Ubuntu 10.04. A lot of the times ksoftirqd/0 or ksoftirqd/1 start using up 100% CPU for no apparent reason, and I am forced to reboot my laptop. Incidentally this also happens when I maximize my (youtube) videos on Chrome and Fireox, but once I un-maximize the videos the CPU usage goes down to the original levels. Any ideas what it going on? --- Addendum --- dmesg produces a ~2000 line output. I searched for 'error' and 'warning' in the output, and here are the relevant lines (along with some headers): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=157dcfda-acd6-4d1b-a6a8-ff9ccff61906 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210518] ata1: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq TrStaTrns } [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error) [58673.134623] chrome[20101]: segfault at 7f38bc4ad000 ip 00007f38be769ecc sp 00007fff24616850 error 4 in libpepflashplayer.so[7f38bdc08000+e55000] [ 24.775546] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended [44920.210531] res 40/00:00:f0:4b:7f/00:00:18:00:00/40 Emask 0x10 (ATA bus error)

  Read the article

• Kubuntu 11.10 very slow during file I/O

  - by dko

  After updating to Kubuntu 11.10, my file I/O performance has slowly just gotten worse and worse. It is to the point where I'm getting 1 MB/s write/read speeds to the drive. If I download something, the whole machine becomes unresponsive for at times up to 30 seconds. This usually causes a timeout in the download and the download then stops. Even extracting archive files, while extracting the computer is just unusable on top of the terrible read/write speeds. It isn't the drive as I have Windows installed as well and when I boot to it I have no issues with the drive. I did not have this issue using Kubuntu 11.04 and am thinking of downgrading. However, I'd much rather help out the Ubuntu community by working through these issues. I'm starting to lean towards the new Linux Kernel is just not working well with file handles. During file I/O my system usage does pick up, but it is not 100% CPU usage. My system is as follows. Samsung 2 TB hard disk drive AMD Phenom II x6 1055 4 GB RAM (only one in use according to system monitor) ATI 5850 HD

  Read the article

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• IRQ Conflicts Causing Video Card and Boot Problems?

  - by sanpatricio

  tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

  Read the article

• can't get a good install:11.10 server

  - by jack

  I screwed up my partitioning aparently tring to get lvm and raid1 going. the machine is an intel dual core dt with 2 gig of ram and 2 sata drives, one 250g and the other 500g. This a build for my school in n.e. Thailand. we have 20+ clients now, a website, email. Our old server is dying fast and we are going to add another 12 stations next week. I really need some help here! 1. have onboard gigabit ethernet that aparently uses same driver as realtek 811c. I installed a pcie gigabit card also 811c. At several points the eth0 has accessed the internet fine, but the eth1 will not communicate. 2. I saw a "fix" for this online which from root: rmmod r8169. this imediately killed the working onboard card. 3.I tried to re-install 11.10 figuring that would re-install r8169. However I messed something up in my partitioning and can't get a clean boot now. 6. so I think after 12 re-installs or so and 2 days. I can get through it right if I can start over with clean drives, but I can't figure out how to empty them out what with soft raid and lvm partitions. seems like i've had it going well and then trying to fix that one little problem, i go backwards.Please help! please send email.-thanks

  Read the article

• Why is CS never a topic of conversation of the layman? [closed]

  - by hydroparadise

  Granted, every profession has it's technicalities. If you are an MD, you better know the anatomy of the human body, and if you are astronomer, you better know your calculus. Yet, you don't have to know these more advance topics to know that smoking might give you lung cancer because of carcinogens or the moon revolves around the earth because of gravity (thank you Discovery Channel). There's sort of a common knowledge (at least in more developed countries) of these more advanced topics. With that said, why are things like recursive descent parsing, BNF, or Turing machines hardly ever mentioned outsided 3000 or 4000 level classes in a university setting or between colleagues? Even back in my days before college in my pursuit of knowledge on how computers work, these very important topics (IMHO) never seem to get the light of day. Many different sources and sites go into "What is a processor?" or "What is RAM?", or "What is an OS?". You might get lucky and discover something about programming languages and how they play a role in how applications are created, but nothing about the tools for creating the language itself. To extend this idea, Dennis Ritchie died shortly after Steve Jobs, yet Dennis Ritchie got very little press compared to Steve Jobs. So, the heart of my question: Does the public in general not care to hear about computer science topics that make the technology in their lives work, or does the computer science community not lend itself to the general public to close the knowledge gap? Am I wrong to think the general public has the same thirst for knowledge on how things work as I do? Please consider the question carefully before answering or vote closing please.

  Read the article

• Banshee doesn't like opening websites

  - by Allan

  I have come across two bugs (which will be added to launchpad if it's not resolved here) When I open any of the websites in Banshee Amazon or Miro Guide as soon as the site is finished loading it crashes Banshee. If I play any video local or remote it will show 1 frame maybe 0.5 sec of video then I get a black screen and audio continues in the backgound. Specs & Details I have a Fujitsu Amilo 1718 laptop with 2 gig of ram (original 1 gig) graphics is provided by ATI Radeon Xpress 200M (don't laugh it works with compiz....just) I have a link to the output of banshee --debug Here Don't have time to read? Here are the Highlights [2 Warn 11:52:34.814] Caught an exception - System.ArgumentNullException: Argument cannot be null. then abit later Debug info from gdb: Could not attach to process. If your uid matches the uid of the target process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try again as the root user. For more details, see /etc/sysctl.d/10-ptrace.conf ptrace: Operation not permitted. ================================================================= Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application. ================================================================= Aborted Not music to my ears as you can expect. The version I am using is 1.9.4 from the daily ppa but these bugs happen in any version of banshee from 1.8.1 and up. So if any one has come across a fix for this problem please share!! additional info Both VLC and Miro work on my system so there isn't a system wide problem with video and I haven't mentioned mono so no trolling it will get voted down.

  Read the article

• Ask the Readers: How Do You Monitor Your Computer?

  - by Jason Fitzpatrick

  Beneath the shiny case of your computer and GUI of your operating system there’s a lot–CPU utilization, memory access, and disk space consumption to name a few things–you can keep an eye on. How do you keep an eye on resource utilization and more on your computer? Image available as wallpaper here. Whether you’re carefully managing a small pool of RAM, making sure your abundant apps don’t bog down your processor, or you just like having an intimate view of what’s going on in the guts of your computer, we want to hear all about the tools you use to do it. How and why do you monitor your computer? From disk use to case temps, any kind of monitoring is fair game. Sound off in the comments with the how and why of your monitoring arrangement and then be sure to stop back in on Friday for the What You Said roundup to see what tricks and tools your fellow readers are using to keep an eye on their hardware. HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

• Ubuntu Boot Slow - Late Drive Access

  - by Mo2

  So I just installed Ubuntu on a brand new Samsung 840 Pro SSD and have noticed that it is slower than expected. The LED access light doesn't start blinking until after 20 seconds or so have passed, after which the boot up seems to actually start. Does anyone have any ideas as to why this is happening? I have Windows 7 installed on a separate SSD and use Windows Loader as the main loader. Windows Loader points to GRUB2, from which I then start Ubuntu up. The 20 seconds count that I mentioned earlier starts AFTER I select Ubuntu 14.04.1 from the GRUB2 menu. Any help is appreciated. EDIT: I forgot to mention that I have only one partition for / and /home. I intend on using a shared NTFS drive for my documents and other personal files, so I had no need for the /home. I did not make a /swap since I have 12 GB of RAM. I also did not make a /boot since I was told that it's not really necessary in my case.

  Read the article

• Colored Collision Detection

  - by tugrul büyükisik

  Several years ago, i made a fast collision detection for 2D, it was just checking a bullets front-pixel's color to check if it were to hit something. Lets say the target rgb color is (124,200,255) then it just checks for that color. After the collision detection, it paints the target with appropriate picture. So, collision detection is made in background without drawing but then painted and drawed. How can i do this in 3D? Because, a vertex is not just exist like a 2D picture's pixel. I looked at some java3D and other programs and understood that 3D world is made of objects. Not just pictures. Is there a program that truly fills the world with vertices ? But it could be needing terabytes of ram even more. Do you know an easy way to interpolate the color of a vertex in java3D or similar program? Note: for a rgb color-identifier, i can make 255*255*255 different 2D objects in background.

  Read the article

• Ubuntu running like mud, system hangs and looks like its running at 3FPS

  - by user240803

  the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

  Read the article

• Acer Aspire 5542G overheating with ubuntu/kubuntu 12.04

  - by james

  I have an Acer Aspire 5542G laptop purchased couple of years ago. All these days, i used windows 7 on it . Then I tried ubuntu 12.04 . Everything was fine except the overheating issue. I updated ubuntu with all security fixes and available updates but nothing solved the problem. With idle use like internet browsing, the cpu fan speeds up a lot and i can feel very hot air coming from the vent (comparable to playing serious 3d game in windows). But it will not go to a point of freeze and shutdown. But as long as im using it, with no intensive tasks at all, the laptop stays too hot. This wasn't the case with windows7. In windows 7 the fan will not rotate at all with normal use. I heard there was manufacturing defect with some acer laptops, but i think it wasn't the case with my laptop since windows7 runs perfectly. I updated the bios to latest version. I cleaned dust in the vents. I tried kubuntu 12.04 up-to-date. Nothing solved the issue. My laptop specs are: CPU : AMD turion2 x2 M500 @ 2.2GHz GPU : AMD Mobility Radeon HD4570 3GB RAM and 320GB hard disk.

  Read the article

• Essbase Analytics Link (EAL) - Performance of some operation of EAL could be improved by tuning of EAL Data Synchronization Server (DSS) parameters

  - by Ahmed Awan

  Generally, performance of some operation of EAL (Essbase Analytics Link) could be improved by tuning of EAL Data Synchronization Server (DSS) parameters. a. Expected that DSS machine will be 64-bit machine with 4-8 cores and 5-8 GB of RAM dedicated to DSS. b. To change DSS configuration - open EAL Configuration Tool on DSS machine.     ->Next:     and define: "Job Units" as <Number of Cores dedicated to DSS> * 1.5 "Max Memory Size" (if this is 64-bit machine) - ~1G for each Job Unit. If DSS machine is 32-bit - max memory size is 2600 MB. "Data Store Size" - depends on number of bridges and volume of HFM applications, but in most cases 50000 MB is enough. This volume should be available in defined "Data Store Dir" driver.   Continue with configuration and finish it. After that, DSS should be restarted to take new definitions.  

  Read the article

• How do I left-click a Java Application on a WeTab running Ubuntu 12.10? (workaround defect in Onboard)

  - by Kat Amsterdam

  I installed Ubuntu 12.10 on my weTab. Everything works perfectly (albeit slowly) and I can touch and use every application execpt ones written in Java. When I start any Java Application the touchscreen does not recognize the left click. I believe it's a problem in OnBoard (the onscreen keyboard) because when I touch the mouse icon on the OnBoard and then the Java Application the left click works. This is very cumbersome for every click to first hit OnBoard mouse icon and then button in the Java app I would like to click. It defeats the purpose of a touchscreen. The Java Application is definitly touchable as it's running on 10 other machines with Elo Touchscreen. How do I get Ubuntu to recognize the left click in a java application automatically when I touch the screen? Or a way to dignose this so I can make a clear bug report? This happens in all the desktop environments (Gnome/Unity, XFCE4 and LXDE) I tried with openjdk-6-* and openjdk-7-* Stats: WeTab 32GB 3G 2GB RAM Intel(R) Atom(TM) CPU N450 @ 1.66GHz - 64-bit Ubuntu 12.10 - 64 bit Unity Desktop environment Xubuntu Desktop environment Lubuntu Desktop environment The real touchscreen driver from EETI (eGalaxy) (also didn't work with the Ubuntu standard touchscreen driver)

  Read the article

• Multitouch screen not detected on Asus Taichi 21DH71

  - by geekfreak

  I just bought this Ultrabook "Asus Taichi 21 DH71". This has Intel 3rd generation i7 processor and 4gb ram with 256 gb SSD. The main feature is that it is a hybrid machine. Naming it has dual screens. When the lid is closed it can be used as a tablet and when lid open it can be used as a notebook. This machine can also be used with the two screens on at the same time. I used ubuntu many years ago and loved it. But I never tried any linux later. My questions are Does the new version of Ubuntu support the Multitouch interface? Will it work specifically on this machine? Will Ubuntu support gestures on multi touchpad? Update 2/22/2013 I did try the latest 64bit Ubuntu(12.10) from live usb and noticed that it couldn't detect the tablet screen. Everything else worked seamlessly. Do you guys think the tablet screen would be detected if I make a complete installation on to the notebook? Please help guys..

  Read the article

• File browsing on Nautilus extremely slow after upgrade to 12.04

  - by Tobelli

  One month ago I updated (no fresh install) to 12.04. Since then nautilus got extremely slow. When I open a folder that contains many subfolders I sometimes have to wait 4 seconds until everything is displayed. This has never been like that before, in previous versions I could always browse between my files extremely fast. I looked in "additional drivers" and changed from Nvidia current-version-update to the recommended drivers. This drastically increased the performance and speed of file browsing, unfortunately just for a couple of days. Now I am stuck again with the very slow Nautilus. I also tried to install the latest nvidia driver like it was suggested here: http://www.techlw.com/2012/03/install-nvidia-drivers-on-ubuntu-1204.html Did not work at all. Also when using the dash to try to find files it does not respond properly: does not find files or loads for ages until the file is displayed. I am working on an Acer Notebook with Intel® Core™ i5 CPU M 430 @ 2.27GHz × 4 6GB RAM GeForce GT 320M/PCIe/SSE2 64 Bit Ubuntu 12.04

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >