Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 137/279 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• Raid recovery in gigabyte GA-8I945 Pro

  - by epeleg

  This was a working machine until a few days ago. And now it won't boot into the OS, during startup if makes clicking sounds (I think from one of the drives). Installed OS: Windows 2003 Web edition Hardware: Gigabyte GA-8I945P Pro , 2*160G Sata in RAID1 configuration , 2 Volumes – 25G and the rest. When I installed windows on it, during setup, I pressed F6 and used ICH7DH drivers of RAID. The manual for the MOBO says: Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press to enter Configuration utility" (Figure 4). Press CTRL+ I to enter the RAID BIOS setup utility. But the machine never shows this message. BIOS SATA RAID/AHCI Mode is set to RAID. Any ideas or pointers on what I can do to recover my data? Thanks

  Read the article

• Certain drives in RAID 5 set intermittently are not recognized

  - by hydroparadise

  I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

  Read the article

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• Micro Btx Motherboard Replacement.

  - by Judy

  I got the Vundo virus that took out the mobo and hard drive on my Gateway GT5220. Is there a replacement that will work? I'm willing to keep XP. I want to fix it the cheapest way possible. The mobo is a NVIDIA GeForce 6150 AM2 microBTX with primary IDE and 4 SATA connections. I want to use a new SATA as my primary, but would like to be able to connect my old IDE drives to transfer my pictures from them to the new drive. I would appreciate any help. Thanks!

  Read the article

• X58 RAID 10 - Am I forced to use Sata2?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. I contacted my supplier who suggested a gigabyte X58A motherboard and 4 Western Digital Caviar black 6Gb/s disks. I have checked the spec for the X58A board, however, and it says: SATA 3Gb/s: RAID 0, RAID 1, RAID 5, and RAID 10 SATA 6Gb/s: RAID 0, and RAID 1. I'm losing half the bandwidth because I'm forced to use SATA2! What should I do?

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• Is it wise to use SSHDs (Solid state hybrid drives) on a server?

  - by Seb

  I have a bunch of servers with very heavy I/O that currently use SATA3/SAS drives, but do suffer from I/O wait on the SATA drives, and I have just been alerted to the existence of SSHDs which cost the same for 1TB as the 1TB SATA drives that we currently use. However, previously (until Seagate shipped their first 3.5" SSHD in March) they seemed to be exclusively for Netbooks/Notebooks, which leads me to suspect they're not exactly built for the heavy I/O they'd be in for with my servers. So, would an SSHD give me a performance boost over my SATA3 drives in a heavy I/O environment (such as multiple very large high speed file transfers) or is it best to stick with SATA3 with I/O wait??

  Read the article

• Cloning Windows 2003 Server to new hard drive results in failure

  - by Level1Coder

  Scenario: Old hdd is a Seagate 320gb SATA drive New hdd is a WD 320gb SATA drive Created an exact clone and replaced old hdd with new hdd. Boot up with new hdd, it gets into Windows 2003 server environment but things look weird. Lots of system event failures in the event viewer log. System is barely unusable, critical services are all down. Boot up with old hdd, everything is fine. QUESTION: Is it possible to do a simple clone of a Windows 2003 server system? All I'm changing is the hard drive, everything else stays the same (old CPU/old mobo/etc..)

  Read the article

• How do I install win 7 to dual boot with xp which is already installed on my new computer?

  - by Rustee

  I am building a new computer and have already installed XP Pro on drive 1 partition 1. Drive 1 is a 500 gig SATA with 4 partitions (1 = 50 gig, 2 = 50 gig, 3 =200 gig, 4 = 200 gig). Drive 2 is a 160 gig SATA with 2 patitions (1 = 60 Gig, 2 = 100 gig). I would like to install win 7 on drive 2, partition 1 to dual boot with xp on drive 1, partition 1. As XP is already installed where wanted, is there anything I should know about installing win 7 on drive 2, partition 1 ? Thanks for any and all inputs. Rustee

  Read the article

• Running RAID on an internal storage drive

  - by Johnny W

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

  Read the article

• "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

  - by Christopher Vigliotti

  I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

  Read the article

• Linux mdadm software RAID 6 - does it support bit corruption recovery?

  - by user101203

  Wikipedia says "RAID 2 is the only standard RAID level, other than some implementations of RAID 6, which can automatically recover accurate data from single-bit corruption in data." Does anyone know if the RAID 6 mdadm implementation in Linux is one such implementation that can automatically detect and recover from single-bit data corruption. This pertains to CentOS / Red Hat 6 if those are different from other versions. I tried searching online but didn't have much luck. With SATA error rates being 1 in 1E14 bits, and a 2TB SATA disk containing 1.6E13 bits, this is especially relevant to preventing data corruption. Thanks!

  Read the article

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• High-End Gaming Desktop PC in France [closed]

  - by Lerikunus

  Hello, I was looking to buy an ALIENWARE AREA 51, as my Desktop crashed some days ago. But the Preliminary Ship date is 03.01.11 and I need the new PC until Friday next week =( Does someone know a(n) (online)-store where Build&Shipping time is quite low so I can get it until next Friday? I am living in France (Nice). Or any place I can ask fot his kind of advice? This is my desired configuration: Overclocked Intel® Core™ i7 980x Extreme Six Core Processor (4.0GHz, 12MB Cache) 12GB Triple Channel 1600MHz DDR3 Dual 2GB ATI Radeon™ HD 6950 2TB RAID 1+0 (4x 1TB SATA-II, 7,200 RPM, 32MB Cache HDDs) 2TB RAID 1 (2x2TB SATA-II, 7,200 RPM, 32MB Cache HDDs) Thank you very much!

  Read the article

• TrueCrypt partition will no longer mount

  - by sparkyuiop

  I am hoping for some advice to help me out of my situation, with luck. I have a computer running Windows 7 Ultimate x64 with 3 hard disks installed. On my 2TB hard disk 2 (non-system disk) I have 4 partitions. One is for music, another for video, a downloads partition and a 500GB RAW Truecrypt encrypted partition / volume that I had setup to mount with 4 photographs used as keyfiles. The 4 photographs are located in my 'Documents' partition which is one of four partitions on my 1.5TB hard disk 1 (non-system disk) When I setup the disk encryption I did not (I'm 99% sure) create a password, I only used the 4 photograph keyfiles to mount the volume. Recently my 1TB hard disk 0 (system / boot) started to fail so I decided to replace it. I was going to clone the old disk to a new disk but decided that a fresh installation would be more beneficial. Once I had transferred all the required 'User Data' from my old hard disk 0 (C: disk) I discarded it. I reinstalled Truecrypt, pointed to the partition, selected my 4 keyfiles photographs and I mounted my encrypted volume with no issues. In fact I mounted it several times after re-installing Windows and after reboots. Now all of a sudden when I try and mount it I get the message "incorrect keyfile(s) and/or password or not a Truecrypt volume". Now I am not sure why this happened as I do not recall exactly what I did between last mounting the volume successfully and it not mounting. Here are some of the possible things I may have done to cause it to stop working but I am at a loss as to where to start to try and resolve the problem. 1. I had swapped the drive letters to a preferred order. 2. I possibly swapped the physical SATA connectors on the mainboard. 3. I enabled 'Hot Plugging' for the two non-system hard disk SATA ports and the DVD SATA port in the BIOS. I have tried changing the encrypted partition drive letter as suggested in another post but this does not help. On my old system the encrypted drive was drive "X". I have about tried it with all the other free drive letters but alas nothing changes. I do not recall what drive letter was allocated to the encrypted partition before I changed them all. I have not tried to change the letter back to what it possibly was to start with as I am happy with the current layout. I will try this is anyone thinks it would be worthwhile though. I do hope I have managed to convey my situation in an understandable manner and live in hope someone could help me recover years of personal files. Thank you very much for taking the time to read my post and for any suggestions you may offer. Regards Phillip Thorne (UK) Anyone???

  Read the article

• Slow dvd burning/reading speeds: how to solve

  - by wouter205

  I have a problem on which I'm struggling since i started using linux a year ago on my desktop, but still haven't found a solution for it. When reading or burning a dvd, the speeds are very slow (mostly under 1x) whilst I did selected the fastest speed in k3b. As such, it takes up to 40-50 minutes to burn one dvd! I read about enabling dma this post but it didn't help. This is the output for dmesg | grep -i dma > [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3527 pages used for memmap [ 0.000000] DMA32 zone: 254441 pages, LIFO batch:31 [ 0.000000] Policy zone: DMA32 [ 0.120356] pnp 00:01: [dma 4] [ 0.120968] pnp 00:05: [dma 2] [ 0.121421] pnp 00:06: [dma 3] [ 0.122617] pnp 00:0b: [dma 0 disabled] [ 0.852321] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe480 bmdma 0xe000 irq 19 [ 0.852325] ata2: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xe008 irq 19 [ 0.861633] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.861636] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.329411] ata1.00: ATA-7: Maxtor 6V250F0, VA111630, max UDMA/133 [ 1.345418] ata1.00: configured for UDMA/133 [ 1.820606] ata4.00: ATAPI: PHILIPS DVDR1660P1, P1.3, max UDMA/33 [ 1.820610] ata4.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled [ 1.820613] ata4.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.836681] ata4.00: configured for UDMA/33 [ 12.296600] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] reading the third and fourth last line, I assume there is indeed a problem with dma? edit: this question still is not solved. Could anyone come up with an other solution please? Thanks

  Read the article

• How do I get network working on a Dell n5010 - Ubuntu 10.04

  - by cyberroger

  Hey. I just formatted a Dell n5010 and installed Ubuntu 10.04. Now,when i try to access the Internet it doesn't find the available networks. Informations about it: My network is set to broadcast SSID; Already typed lspci, and it doesnt returns my wireless card; Tried installing windows drivers from fabricant cd usind diswrapper, but it says it cant complete the installation because it cant find some "Device" folder; I don't know what else to do, I switch the wireless button on/off and it just can't see any wireless connection, includin mine. Here are the informations about lspci: *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fbc00000-fbc03fff And this: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 12:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) 13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Thanks!

  Read the article

• Is a disk/ata timeout exception dangerous?

  - by j-g-faustus

  I have a few hard drives in mdadm RAID 5 configured to go to standby after a few minutes of inactivity. (Using hdparm.conf spindown_time.) At irregular intervals I get messages like these in dmesg: [ 1840.251661] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1840.251722] ata4.00: failed command: SMART [ 1840.251758] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1840.251759] res 40/00:14:50:2e:04/00:00:02:00:00/40 Emask 0x4 (timeout) [ 1840.251858] ata4.00: status: { DRDY } [ 1840.251888] ata4: hard resetting link [ 1840.600742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1840.601521] ata4.00: configured for UDMA/133 [ 1840.601547] ata4: EH complete [337877.713988] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [337877.714019] ata4.00: failed command: SMART [337877.714038] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [337877.714039] res 40/00:04:90:10:81/00:00:00:00:00/40 Emask 0x4 (timeout) [337877.714089] ata4.00: status: { DRDY } [337877.714107] ata4: hard resetting link [337878.063085] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [337878.063743] ata4.00: configured for UDMA/133 [337878.063764] ata4: EH complete I think the exception is caused by smartd when a drive does not wake up quickly enough. There are no issues (that I can tell) in accessing the drives normally through the file system - it takes a few seconds longer than normal when they are asleep, but there are no exceptions. Is this something I should worry about, as a potential symptom on something that could corrupt a drive over time? Or can I safely ignore it as part of normal operation? Edit: By request: smartctl -a for sdaand sde, both disks are members of the array. If ata4is the same as scsi-4 then sde is the one that gave the error above, according to /dev/disk/by-path.

  Read the article

• DVD-drive detected by BIOS and UEFI but not by Ubuntu 12.04

  - by user97591

  I have build a new tower containing; Asrock Z77 extreme4 (motherboard) Core i7 (processor) Hitachi LGE-DMGH 12 L (B) GH15F SATA (SATA DVD-drive) Problem is; BIOS and UEFI has no problems detecting the DVD-drive but it is not detected by Ubuntu 12.04. It is not present in /etc/fstab or /etc/mtab. Below is the contents of fstab and mtab. Thanks for all your help. fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=f007bc60-da4c-4f36-99a7-77083c5f3654 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=5d59949c-aed9-442a-877d-5abf1ccaadc3 none swap sw 0 0 mtab: /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/tom/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=tom 0 0

  Read the article

• Booting Ubuntu 12.04 from external eSATA disk

  - by Lord of Scripts

  This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

  Read the article

• Why is my HDD going back from standy?

  - by Pablo

  My hard drives, connected to Ubuntu server are producing the following log every exactly 5 minutes. Nov 1 14:10:50 localhost kernel: [ 1602.884936] ata2.00: hard resetting link Nov 1 14:10:51 localhost kernel: [ 1603.226804] ata2.01: hard resetting link Nov 1 14:10:52 localhost kernel: [ 1604.274533] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 1 14:10:52 localhost kernel: [ 1604.274548] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 1 14:10:52 localhost kernel: [ 1604.356669] ata2.00: configured for UDMA/133 Nov 1 14:10:52 localhost kernel: [ 1604.375247] ata2.01: configured for UDMA/133 Nov 1 14:10:52 localhost kernel: [ 1604.375265] ata2: EH complete I don't think this is related to hard drive failure, because it happens for ALL hard drives connected and ONLY when I write spindown_time = 12 in /etc/hdparm.conf. The reason I add this value is to put disks into standby mode after 60 seconds, which is happening after that period (checked with hdparm -C). The first clue I thought that smartd was running and spinning the drive. However, I couldn't find it in ps -aux | grep smart. Additionally, iostat does show that nobody accessed those drives, since Blk_read, Blk_wrtn remain unchanged. I also killed all processes that may be doing something with hdd(eg SAMBA). So I guess the problem is solely with hdparm... I have no more clue where that 5 minute value hides.

  Read the article

• error/message: the disk drive for /home is not ready... when connecting an external hard drive

  - by seallussus

  i am running Ubuntu 10.04 all updated installed to date (3/28/2012) and when i connect another sata HD i get this message the disk drive for /home is not ready yet or not present continue to wait, or press S to skip mounting or M for manual recovery so i press S but i get this message could not update ICEauthority file /home/username/.ICEauthority And when a press close i get this there is a problem with the configuration server (/usr/libconf2-4/gconf-sanity-check-2 exited with status 256) And when a press close i get message Nautilus could not create the following required folders :/home/username/desktop,/home/username/.Nautilus before running Nautilus, please create these folders or set permissons such that Nautilus can reach them And finally when a press Ok at the last message it disappears and i get a blank screen with a lot of colors on it and with nothing else so i shutdown (power button ) and disconnect the HD and boot without problems so how to fix this in simple commands because i am a total Linux noob notes -In the original error my username was in place of username i wrote (did not want to confuse anybody ) -I tried searching for this problem but a got a lot of different answers and most of them were really complicated to me and not working -I got a data HD connected and working without problems also the HD i installed Ubuntu on is Sata (maybe it helps) -Apologize for me bad English its not my mother language

  Read the article

• Just installed Ubuntu 12.04. When booting, all I get is a black screen with cursor

  - by user66378

  Installation appears to go fine. After rebooting, I get my motherboard loading screens, but when it comes time for Ubuntu to boot, I just get a black screen with a blinking white underscore in the top-left - same as I got when waiting for the install CD to load, except it lasts forever. The only keypress it seems to recognize is ctrl+alt+del, which reboots. Letters don't register, function keys w/ or w/o modifiers do nothing. I've installed Ubuntu 12.04 twice and got the same error. The first time, I installed it as the only OS, and had it take up the whole disk. The second time, I installed Windows 7 first, then Ubuntu by specifying custom partitions. After this install, it would boot straight to Windows without showing grub. I used EasyBCD to add the Ubuntu installation to grub, and this got grub to show, and let me select it, but it led back to the same error described up top. I've had Linux Mint 11 and 12 installed on this PC, but was unable to get previous versions of Ubuntu to install (always had errors while installing, not after). Hardware: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) LGA 1155 ASUS SABERTOOTH P67 (REV 3.0) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard EVGA 01G-P3-1371-TR GeForce GTX 460 (Fermi) CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Western Digital RE4 WD5003ABYX 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive

  Read the article

• Configuring Novel iPrint client on ubuntu 13.10

  - by Mahdi Sadeghi

  Recently I have struggled a lot to make Novel iPrint client to work on my laptop. I need it to use Follow Me printers in our university(you can take your print form any printer). Using this tutorial from Novel, I tried to convert the rpm package and install it on Ubuntu 13.04 & 13.10. The post install script from installing generated deb package had a typo which I saw in post install messages and I fixed that. Now I have the client running. To see the client UI I installed cinnamon desktop(because unity does not have system tray and old solutions did'nt work to whitelist Novel clinet). I have iPrint plugin installed on firefox as well(I copied the shared object files to plugin directories). I try installing printers from provided ipp URL(which lists available printers on the server) with no success. After clicking the printer name I see this: I have various errors: Formerly firefox used to asked my network username/password for installing SSL printer but now it returns this: iPrint Printer - The printer is currently not available. However I can install non-SSL version but the printer location is either empty or points to: file:///dev/null even if I change it to the exact address which I see on working machines still it prints nothing. I have tried the novel command line tool, iprntcmd to print. It is being installed at: /opt/novell/iprint/bin/ msadeghi@werkstatt:/opt/novell/iprint/bin$ ./iprntcmd --addprinter ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me\ -\ IPP iprntcmd v05.04.00 Adding printer ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me - IPP. Added printer ipp://iprint.rz.hs-offenburg.de/ipp/Follow-me - IPP successfully. It adds the printer with empty location and again no print. What I found interesting is the log file at ~/.iprint/errors.txt with strange errors which I hope somebody here can understand. When I try to install the SSL printer I receive these logs(note that HP is my local printer and has nothing to do with iprint): Thu Oct 31 11:02:03 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:03 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:05 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:05 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:06 2013 Trace Info: mydoreq.c, line 676 Group Info: CLIB Error Code: 0 (0x0) User ID: 1000 Error Msg: Success Debug Msg: MyCupsDoFileRequest - httpReconnect failed (0) Thu Oct 31 11:02:06 2013 Trace Info: mydoreq.c, line 1293 Group Info: CUPS-IPP Error Code: 1282 (0x502) User ID: 1000 Error Msg: iPrint Printer - The printer is currently not available. Debug Msg: MyCupsDoFileRequest - IPP SERVICE UNAVAILABLE Thu Oct 31 11:02:06 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:06 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified Thu Oct 31 11:02:08 2013 Trace Info: iprint.c, line 6690 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for file:///dev/null - Unknown Port Type - file Thu Oct 31 11:02:08 2013 Trace Info: iprint.c, line 6800 Group Info: IPRINT-lib Error Code: 4096 (0x1000) User ID: 1000 Error Msg: iPrint Lib - Bad URI type supplied (not IPP:, HTTP:, or HTTPS:). Debug Msg: IPRINTInterpretURI for hp:/usb/HP_LaserJet_1018?serial=KP103A1 - No Port type specified I should say that my friend can print using the same instructions on CrunchBang easily and another guy on 12.04 LTS but with more struggling. It worked for me on linux mint maya with my old laptop as well. Is there anybody out there who can help me to solve these problems? I am really disappointed with Novell and our university support. PS. I had the same problemwith 13.04. No matter if I am within the network or I connect with VPN, I have the same issues.

  Read the article

• Broadband wireless drivers don't work

  - by user88235

  I have a Dell Latitude E6520 which is a Ubuntu 12.04 certified hardware. However the driver assigned to the Dell Wireless 5630 (EVDO-HSPA) Mobile Broadband Mini-Card doesn't seem to work. When I boot in Windows 7 I connect to Verizon dialing *99# with no username or password but it won't connect using Ubuntu. The windows drivers are from Novatel Wireless Inc 1.0.0.6 if that helps. This is also an internal card not USB and the hardware Id is USB\VID_413C&PID_8194&REV_0002&MI_00 If anyone can help me with obtaining the correct driver or maybe some other way of getting it to work I would be very grateful. My job requires traveling and I need internet access but hate using Win7.

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >