Search Results

Search found 23082 results on 924 pages for 'address space'.

Page 138/924 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

  • Online Storage and security concerns

    - by Megge
    I plan to set up a small fileserver. I already own a small server at HostEurope (VirtualServer L, 250GB space), but they don't offer enough space (there is the HostEurope Cloud, but paying for bandwidth isn't an option here, video-streaming should be possible) Requirements summarized: Storage: 2TB, Users: ~15, Filesizes: < 100GB, should be easily reachable (Mount as a networkdrive or at least have solid "communication" software) My first question would be: Where can I get halfway affordable online storages? And how should I connect them to my server? Getting an additional server is a bit overkill, as I know no hoster which allows 2 TB on a small 2 Ghz Dual Core 2 GB RAM thingy (that would be enough by far, I just need much space), and connecting it via NFS or FTP over Internet seems a bit strange and cripples performance. Do you have any advice where I could get that storage service from? (I sent HostEurope a custom request today, but they didn't answer till now. If they can provide me with that space, this question will be irrelevant, but the 2nd one is the more important one anway, don't do much more than recommend me some based on experience, you don't have to crawl hours through hosting services) livedrive for example offers 5 TB for 17€ / month, I'd be happy with 2 TB for 20 €, the caveat is: It doesn't allow multiple users, which leads me to my second question: Where are the security problems? Which protocol is sufficient (I want private and "public" folders etc. the usual "every user has its own and a public space"-thing), secure and fast? (I'd tend to (S)FTP, problem with FTP is: Most of those hosting services don't even allow FTP with mutliple users and single users lead me into "hacking" a solution (you could map the basic folder structure on the main server and just mount every subfolder from the storage, things get difficult with a public folder with 644 permissions though) Is useing something like PKI or 802.1X overkill for private uses?

    Read the article

  • VRF Internet Gateway Multiple External IP's 1 Internal IP to AWS

    - by user223903
    Trying to setup VRF for the first time and its not working for me even though I keep reading everything online. IP's are different to real life. I have an Internet connection which I can ping to my router in the current setup below 195.45.73.22 I have a block of ip addresses 195.45.121.0/27 I want to setup multiple VPN's to AWS so need to have multiple external ip's thus the block of IP addresses. I have setup the 2nd and 3rd IP address but can not ping them from external. Any help would be grateful. Bryan ip source-route ! ip vrf Internet rd 1:1 route-target export 1:1 route-target import 1:1 ip vrf AWSSydney1 rd 2:2 route-target export 2:2 route-target import 2:2 route-target import 1:1 ip vrf AWSSydney2 rd 3:3 route-target export 3:3 route-target import 3:3 route-target import 1:1 ip cef no ip domain lookup no ipv6 cef multilink bundle-name authenticated interface FastEthernet0/0 description Vocus Internet no ip address speed 100 full-duplex interface FastEthernet0/0.1 encapsulation dot1Q 1 native ip address 195.45.73.22 255.255.255.252 interface FastEthernet0/0.2 encapsulation dot1Q 2 ip vrf forwarding AWSSydney1 ip address 195.45.121.1 255.255.255.224 interface FastEthernet0/0.3 encapsulation dot1Q 3 ip vrf forwarding AWSSydney2 ip address 195.45.121.2 255.255.255.224 interface FastEthernet0/1 description LAN_SIDE ip address 10.0.0.5 255.255.255.0 speed 100 full-duplex no mop enabled ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 195.45.73.21 ip route vrf Internet 0.0.0.0 0.0.0.0 195.45.73.21

    Read the article

  • How To Set Up A Loadbalanced High-Availability Apache Cluster On Windows

    - by bReAd
    Setting up a two-node Apache web server cluster that provides high-availability. In front of the Apache cluster we create a load balancer that splits up incoming requests between the two Apache nodes. Because we do not want the load balancer to become another “Single Point Of Failure”, we must provide high-availability for the load balancer, too. Therefore our load balancer will in fact consist out of two load balancer nodes that monitor each other using heartbeat, and if one load balancer fails, the other takes over silently. The following setup is proposed: Apache node 1: webserver1.example.com (webserver1) – IP address: 192.168.0.101; Apache document root: /var/www Apache node 2: webserver2.example.com (webserver2) – IP address: 192.168.0.102; Apache document root: /var/www Load Balancer node 1: loadb1.example.com (loadb1) – IP address: 192.168.0.103 Load Balancer node 2: loadb2.example.com (loadb2) – IP address: 192.168.0.104 Virtual IP Address: 192.168.0.105 (used for incoming requests) Currently, there are many solutions for Linux machines and there aren't any on windows. I've tried searching a long time for solutions on Windows platform How do I create the virtual IP in windows and perform monitoring and make the load balancer listen to the virtual IP Address?

    Read the article

  • SBS 2008 Duplicate Files - what can I delete

    - by Stu
    I'm trying to look after my company's SBS 2008 server. It keeps running out of space on the C: (OS)drive, so Exchange stops when it gets down to 4Gb free space. From what I can tell after the last time I had a consultant in to fix it, there should comfortably be about 20Gb. Running a duplicate files report gives me a huge list of duplicated files, and identifies just how much space they are hogging. But my question is, which ones can I delete to recover the space? Can I tell, from what's shown on the report, the files that are redundant and can safely be deleted?

    Read the article

  • read data on ntfs partition - ubuntu

    - by albert green
    Hi, I had a win xp with an NTFS partion for programs (c:) and I installed ubuntu 10.10 on it. I will use ubuntu from now on. On the disk there was a space for the NTFS partition and free space. I created in the free space a new linux partition. So the new linux partition is a ext3. now from ubuntu I used the disk utility and saw that the windows is marked as free space. I had only one possibility, which is to create a partition, so I did as NTFS. I did NOT format it. I don't care about the windows system, I just need to access the program files folder on that partition and get my chrome bookmarks. I forgot to save them before the installation of linux. do you think it is possible? if so how? thanks.

    Read the article

  • Multiple IPv6 addresses being assigned to single interface

    - by Steven Copestake
    I'm configuring a DHCP scope for IPv6, however all my clients are getting 2 or more IPv6 addresses assigned to the interface. I'm using fda8:6c3:ce53:a890:/64 as the prefix. The scope is on a machine running Windows Server 2008 R2 however I'm looking to roll it out on Server 2012 as well. My clients are getting the following: IPv6 Address. . . . . . . . . . . : 1024::1492:9288:7357:7d30(Preferred) IPv6 Address. . . . . . . . . . . : fda8:6c3:ce53:a890::1(Preferred) IPv6 Address. . . . . . . . . . . : fda8:6c3:ce53:a890:1492:9288:7357:7d30(Pr rred) Link-local IPv6 Address . . . . . : fe80::1492:9288:7357:7d30%10(Preferred) In this example there's no DHCP scope and the machine has a static IP of fda8:6c3:ce53:a890::1. With this in mind where are the 1024 address and the fda8:6c3:ce53:a890:1492:9288:7357:7d30 address coming from?

    Read the article

  • Instabilities with Bridged and bonded interfaces

    - by Henry-Nicolas Tourneur
    I did post yesterday to get a working setup with several bridged interfaces used for virtual machines (KVM/libvirt). One of the bridged interface is just using eth3 as its ports while the second one (public traffic) is using an ethernet bonded interface. That setup is working but not all the time ! I can start a download from a vm, then it will stop and freeze! So I don't know if my bridge parameters are correct, could you check the below config ? iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.255 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.255 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp on auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.255 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.255 And yes, it also sometimes speaks about martian on the host: kernel: [249146.055172] martian source 10.160.0.17 from 10.160.0.10, on dev vnet2 kernel: [249146.073122] ll header: ff:ff:ff:ff:ff:ff:54:52:00:76:c3:5c:08:06

    Read the article

  • How do I apply multiple subnets to a server with one NIC?

    - by Cosban
    I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

    Read the article

  • ssh timeout issue connecting to an EC2 instance on OS X

    - by mamusr
    I am new to AWS and not a networking expert but curious to know more about it. I created a VPC with a public subnet only. Then i created an EC2 instance using an Ubuntu 14.04 64-bit pv AMI image (ami-e84d8480) as well generating the key pair needed to connect to it through ssh. I followed amazon's instructions to connect to an EC2 instance via ssh which did not work. Here is my attempted input and debug log: Running on OS X 10.9.4 user$ ssh -vvv -i key.pem [email protected] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 102: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22. debug1: connect to address xxx.xxx.xxx.xxx port 22: Operation timed out ssh: connect to host xxx.xxx.xxx.xxx port 22: Operation timed out To attempt to resolve the issue: I enabled the SSH port. Tried different usernames other than ubuntu, like ec2-user and root. Initially set an inbound ssh rule in the security group to connect to only my ip address. When that did not work, i changed it to allow any ip to connect. But those actions did not fix the problem. Here are my guesses as to what i am missing in getting the EC2 instance connection to work. My etc/ssh_config file may be preventing the connection from taking place. I may have missed an important networking detail when setting up the VPC. I do not have a public ip address specified for the instance. I am connecting through the private ip address. My questions for the community: Am i going about it the wrong way connecting to the instance through the private ip address? if so, do i need to specify a public ip address for it to connect or some other method?

    Read the article

  • Access violations on Windows 2008 VPS

    - by James Hay
    I'm running a Windows 2008 VPS with 2GB RAM. I'm trying to install hMailServer on the VPS but when I get to the "choose installation directory" dialog I get error messages that keep popping up and make it so that I cannot continue. As soon as the dialog opens I get these two errors: "Access violation at address 73F53560. Read of addresss 00000014." "Access violation at address 73EEBE21. Read of addresss 00000018." Once I close these it frees up again but as soon as I click "Browse.." (to choose the directory) I get the following errors repeatedly that reopen if I close them. "Access violation at address 73F0E371. Read of address 00000014." "Access violation at address 73F4A006. Read of address 00000000." I have no idea how to fix these. I can't run memory diagnostics, I assume because it's a VPS and not an actual server.

    Read the article

  • Estimate compressed file size in tar.gz

    - by liori
    I've got a set of .tar.gz files, which are duplicity backup files (either full backups or incremental ones). I'd like to compute which directories take the most space on backups. This will most probably be a different figure to calculating which directories take the most space on a live filesystem because I need to account for how often are files changing (and therefore taking space on incremental backups) and how compressible are files. I know that while many other archive formats store compressed files as different entities inside the archive file, .tar.gz files do not, and therefore it is impossible to get an exact amount of storage taken in the archive by a single file after compression. Are there any tools to calculate at least some estimates?

    Read the article

  • Tomcat web application intermittent freeze

    - by tinny
    I have a Grails web application (just a standard war file) deployed on a Ubuntu 10.10 server running on tomcat 6. My database is postgresql. The problem is that every so often (once or twice a day after inactivity) when I try to log into this web application it just freezes. I can navigate to the login page but when I try and login (first time the DB is hit, might be a clue..?) the application just freezes indefinitely, no 500 response code... the browser just waits and waits. I followed the instructions detailed here because the problem described sounded the same as mine. My GC logging showed no long running GC, all sub sec. When the application freezes a jmap heap output is... using parallel threads in the new generation. using thread-local object allocation. Concurrent Mark-Sweep GC Heap Configuration: MinHeapFreeRatio = 40 MaxHeapFreeRatio = 70 MaxHeapSize = 536870912 (512.0MB) NewSize = 21757952 (20.75MB) MaxNewSize = 87228416 (83.1875MB) OldSize = 65404928 (62.375MB) NewRatio = 7 SurvivorRatio = 8 PermSize = 21757952 (20.75MB) MaxPermSize = 85983232 (82.0MB) Heap Usage: New Generation (Eden + 1 Survivor Space): capacity = 19595264 (18.6875MB) used = 11411976 (10.883308410644531MB) free = 8183288 (7.804191589355469MB) 58.23843965562291% used Eden Space: capacity = 17432576 (16.625MB) used = 9249296 (8.820816040039062MB) free = 8183280 (7.8041839599609375MB) 53.05754009046053% used From Space: capacity = 2162688 (2.0625MB) used = 2162680 (2.0624923706054688MB) free = 8 (7.62939453125E-6MB) 99.99963008996212% used To Space: capacity = 2162688 (2.0625MB) used = 0 (0.0MB) free = 2162688 (2.0625MB) 0.0% used concurrent mark-sweep generation: capacity = 101556224 (96.8515625MB) used = 83906080 (80.01907348632812MB) free = 17650144 (16.832489013671875MB) 82.62032270912317% used Perm Generation: capacity = 85983232 (82.0MB) used = 62866832 (59.95448303222656MB) free = 23116400 (22.045516967773438MB) 73.1152232100324% used Anyone know what "From Space:" is? Any ideas on further fault finding ideas? I dont have much experience with this type of fault finding.

    Read the article

  • HP Procurve 2610 intervlan routing

    - by user19039
    Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

    Read the article

  • Something very strange with network

    - by Rodnower
    Hello, I have Windows 7 and I have very strange thing with my network. Some time I was connected through wireless router and my IP was 192.168.2.103, router's IP was 192.168.2.1 and some other IP was 192.168.2.100. The last I get from page "active DHCP clients" of web interface of the router and from "wireless clients" I may to see that 192.168.2.100 not (!) belong to my MAC address. Router build by EDimax. So after that I disabled wireless function of the router and restarted it. In this time I had not ping to 192.168.2.1. Also I had not any other connection, not wireless nor cable, but (!) I still had ping to 192.168.2.100 and I not understand what this voodoo is... C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms This is what I had: C:\Users\Andrey>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Andrey-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2 Physical Address. . . . . . . . . : 06-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Gigabyte GN-WS50G (mini) PCI-E WLAN Card Physical Address. . . . . . . . . : 00-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 00-1B-24-B6-09-91 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes C:\Users\Andrey>arp -a -v Interface: 127.0.0.1 --- 0x1 Internet Address Physical Address Type 224.0.0.22 static 239.255.255.250 static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-d2-8c-af invalid 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-ff-f1-f6 dynamic 192.168.2.101 00-27-19-bc-8b-9c dynamic 192.168.2.102 00-16-e6-6c-ae-d4 dynamic 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 224.0.0.22 01-00-5e-00-00-16 static 255.255.255.255 ff-ff-ff-ff-ff-ff static C:\Users\Andrey>route print =========================================================================== Interface List 14...06 1d 7d 40 61 eb ......Microsoft Virtual WiFi Miniport Adapter #2 13...00 1d 7d 40 61 eb ......Gigabyte GN-WS50G (mini) PCI-E WLAN Card 11...00 1b 24 b6 09 91 ......Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None Only after reboot I lost ping to there: C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), So what this mysterious cache is? Thank you for ahead.

    Read the article

  • I/O intensive MySql server on Amazon AWS

    - by rhossi
    We recently moved from a traditional Data Center to cloud computing on AWS. We are developing a product in partnership with another company, and we need to create a database server for the product we'll release. I have been using Amazon Web Services for the past 3 years, but this is the first time I received a spec with this very specific hardware configuration. I know there are trade-offs and that real hardware will always be faster than virtual machines, and knowing that fact forehand, what would you recommend? 1) Amazon EC2? 2) Amazon RDS? 3) Something else? 4) Forget it baby, stick to the real hardware Here is the hardware requirements This server will be focused on I/O and MySQL for the statistics, memory size and disk space for the images hosting. Server 1 I/O The very main part on this server will be I/O processing, FusionIO cards have proven themselves extremely efficient, this is currently the best you can have in this domain. o Fusion ioDrive2 MLC 365GB (http://www.fusionio.com/load/-media-/1m66wu/docsLibrary/FIO_ioDrive2_Datasheet.pdf) CPU MySQL will use less CPU cores than Apache but it will use them very hard, the E7 family has 30M Cache L3 wichi provide boost performance : o 1x Intel E7-2870 will be ok. Storage SAS will be good enough in terms of performance, especially considering the space required. o RAID 10 of 4 x SAS 10k or 15k for a total available space of 512 GB. Memory o 64 GB minimum is required on this server considering the size of the statistics database. Warning: the statistics database will grow quickly, if possible consider starting with 128 GB directly, it will help. This server will be focused on I/O and MySQL for the statistics, memory size and disk space for the images hosting. Server 2 I/O The very main part on this server will be I/O processing, FusionIO cards have proven themselves extremely efficient, this is currently the best you can have in this domain. o Fusion ioDrive2 MLC 365GB (http://www.fusionio.com/load/-media-/1m66wu/docsLibrary/FIO_ioDrive2_Datasheet.pdf) CPU MySQL will use less CPU cores than Apache but it will use them very hard, the E7 family has 30M Cache L3 wichi provide boost performance : o 1x Intel E7-2870 will be ok. Storage SAS will be good enough in terms of performance, especially considering the space required. o RAID 10 of 4 x SAS 10k or 15k for a total available space of 512 GB. Memory o 64 GB minimum is required on this server considering the size of the statistics database. Warning: the statistics database will grow quickly, if possible consider starting with 128 GB directly, it will help. Thanks in advance. Best,

    Read the article

  • External hard drive FAT32 to NTFS conversion fails

    - by Pieter
    I'm trying to convert the FAT32 file system of an external hard drive to NTFS. Here's what happened: C:\Windows\system32>chkdsk G: The type of the file system is FAT32. Volume PIETEREXT created 3/19/2008 12:43 Volume Serial Number is 1806-2E30 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 488,264,768 KB total disk space. 72,192 KB in 1,503 hidden files. 1,281,792 KB in 40,029 folders. 309,235,168 KB in 199,915 files. 177,675,584 KB are available. 32,768 bytes in each allocation unit. 15,258,274 total allocation units on disk. 5,552,362 allocation units available on disk. C:\Windows\system32>cd \ C:\>convert g: /fs:ntfs The type of the file system is FAT32. Enter current volume label for drive G: PIETEREXT Volume PIETEREXT created 3/19/2008 12:43 Volume Serial Number is 1806-2E30 Windows is verifying files and folders... File and folder verification is complete. Windows has scanned the file system and found no problems. No further action is required. 488,264,768 KB total disk space. 72,192 KB in 1,503 hidden files. 1,281,792 KB in 40,029 folders. 309,235,168 KB in 199,915 files. 177,675,584 KB are available. 32,768 bytes in each allocation unit. 15,258,274 total allocation units on disk. 5,552,362 allocation units available on disk. Determining disk space required for file system conversion... Total disk space: 488384001 KB Free space on volume: 177675584 KB Space required for conversion: 975155 KB Converting file system The conversion failed. G: was not converted to NTFS I looked at the TechNet page for my error, but after closing every app the conversion was still failing halfway through. Why does it keep failing? I kept an eye on Task Manager but it didn't look like my system resources were near depletion. I'm using Windows 8.

    Read the article

  • Windows 8.1 Insufficient storage available to create shadow copy

    - by Bob.at.SBS
    [Note: After I entered the problem statement, I found this question, which is apparently the same problem. Maybe one of us will get a good answer...] I have used the "Windows 7 File Recovery" tool under Windows 8 to create system image backups to an external USB hard drive. I built a new Windows 8.1 machine, and I want to create my first system image backup of that machine to the same USB hard drive. The "Windows 7 File Recovery" tool is gone in Windows 8.1, but wbAdmin is alive and well: wbAdmin start backup -backupTarget:\\?\Volume{2a2b...994f} -allCritical -quiet fails with this text displayed: wbadmin 1.0 - Backup command-line tool (C) Copyright 2013 Microsoft Corporation. All rights reserved. Retrieving volume information... This will back up (EFI System Partition),(C:),Recovery (300.00 MB) to \?\Volume {2a2b1255-3a86-11e3-be86-b8ca3a83994f}. The backup operation to F: is starting. Creating a shadow copy of the volumes specified for backup... Summary of the backup operation: The backup operation stopped before completing. The backup operation stopped before completing. Detailed error: ERROR - A Volume Shadow Copy Service operation error has occurred: (0x8004231f) Insufficient storage available to create either the shadow copy storage file or other shadow copy data. The EFI System Partition is 100 MB The Recovery Partition is 300 MB The C partition is 1.72 TB, NTFS, 218 GB used, 1.51 TB free The destination drive is 1.81 TB, NTFS, 678 GB used, 1.15 TB free I've fiddled with vssadmin resize shadowstorage, with no change in the error. vssadmin list shadowstorage displays: Shadow Copy Storage association For volume: (C:)\?\Volume{37a0...263}\ Shadow Copy Storage volume: (C:)\?\Volume{37a0...263}\ Used Shadow Copy Storage space: 2.39 GB (0%) Allocated Shadow Copy Storage space: 2.81 GB (0%) Maximum Shadow Copy Storage space: 531 GB (30%) Shadow Copy Storage association For volume: (F:)\?\Volume{2a2...94f}\ Shadow Copy Storage volume: (F:)\?\Volume{2a2...94f}\ Used Shadow Copy Storage space: 334 GB (17%) Allocated Shadow Copy Storage space: 337 GB (18%) Maximum Shadow Copy Storage space: UNBOUNDED (922154758%) (Yeah, the "percent calculation" for UNBOUNDED is seriously bogus.) I've run SFC /verifyonly and it seems happy. I've verified that the new `Volume Shadow Copy" service starts when I start the backup operation. Any suggestions?

    Read the article

  • Linux Disk Setup for VMs

    - by zjherner
    Been trying to find the ideal way to setup disks/partitions for Linux guests on ESXi. Seems as though Linux is falling behind when it comes easily adding disk space. The end goal is to be able to add disk space to a Linux server without rebooting the server or taking the server offline. Ideally, I would expect adding disk to a Linux machine should be as easy as adding disk space to a Windows machine. I expand the vmdk file from vSphere Open disk mangler find the disk and extend volume. Would have to use command line tools in linux which is no big deal, but I haven't been able to find a solid way to exand filesystems on the fly. What is everyone else using for disk setups on their linux guests? Has anyone been able to acheive adding storage space to linux without downtime? Can it be done without using lvm?

    Read the article

  • Resize primary partition

    - by telebog
    I have a hdd with the folowing partition table 12Gb Primary Partition (ntfs) 140Gb Extended Partition (ntfs) I want to install windows 7 and I need more space for the Primary Partition. The problem is that when I resize partitons I obtain: 12Gb Primary Partition (ntfs) 110Gb Extended Partition (ntfs) 30Gb Free Space So I can't allocate the free space to primary partition because the free space is at the end of the disk. Is there a solution to extend the primary partition as: 42Gb Primary Partition (ntfs) 110Gb Extended Partition (ntfs) without repartitioning the entire disk? I used partition magic, gparted-live-0.4.6-4 and others with no success. With the Disk Management from Vista I manage to extend primary partition, but made my partitions dinamic.

    Read the article

  • VPN from Windows XP to OpenSwan: correct setup?

    - by Gnudiff
    Main question is what I am doing wrong in my OpenSwan or L2TP client setup? I am trying to create a Linux OpenSwan VPN connection from Windows XP machine, using preshared key and the builtin Windows XP L2TP IPsec option. I have followed the instructions in Linux Home networking Wiki for setting up OpenSwan and a guide to making it work with the Windows XP client, but am now stuck. The net setup is as follows: [my windows client, private IP A]<->[f/wall B]<-internet->[g/w X]<->[Linux OpenSwan server Y] A - private subnet /24 B - internet address X - internet address /24 Y - internet address on same subnet as X What I essentially want is for computer with A address to feel and work, as if it was in X subnet for purposes of outgoing and incoming TCP and UDP connections. My OpenSwan setup is as follows: /etc/ipsec.conf (AAA and YYY indicates ip address parts of A and Y addresses): conn net-to-net authby=secret left=B leftsubnet=AAA.AAA.AAA.0/24 leftnexthop=%defaultroute right=Y rightsubnet=YYY.YYY.YYY.0/24 rightnexthop=B auto=start the secret in /etc/ipsec.secrets is listed as: B Y : PSK "0xMysecretkey" where B & Y stand for respective IP adresses of gateway B and linux server Y My L2TP WinXP setup is: IP of destination: Y don't prompt for username security options: typical, require secured pass, don't require data encryption, IPSec PSK set to 0xMysecretkey networking options: VPN Type: L2TP IPSec VPN; TCPIP protocol (with automatic IP address assignment) and QOS packet schedulers enabled The error I get from Windows client is 789: "error during initial negotiation"

    Read the article

  • How can I permanently remove default root hints from a Server 2008 DNS server?

    - by TonyD
    My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

    Read the article

  • What is the keyboard shortcut to clear formatting on Office 2008 Mac?

    - by Laurent Bourgault-Roy
    I recently switched from a PC to a brand new Macbook Pro. I was happy to see that most of the keyboard shortcuts in Word 2008 where the same or almost the same than in Word 2007. However, there is one keyboard shortcut that I dearly miss : the clear formatting shortcut (ctrl + space on Windows). I know the feature exists since it's in the formatting bar, but I can't find the keyboard shorcut. I tried cmd + space but that is the system keyboard shortcut to switch the keyboard type. alt + space delete the text without deleting the formatting. ctrl + space doesn't seem to do anything. Does anyone know what the keyboard shortcut for the clear formatting command may be? I hope there's one because it's really painful to reach for the mouse everytime I put a title and I want to switch to a normal paragraph style...

    Read the article

  • MySQL slave server not removing old relay binlogs

    - by MKzero
    I have a MySQL server with slave replication on another host. Today I stumbled across the high disk usage of the slave host and invastigated what takes up all the space. As it turns out this space is occupied by the slaves relay logs. I tried to turn the expire_logs_days variable down and restarted the MySQL daemon but the reported disk space stays the same. I could't really find anything exept that FLUSH LOGS should clear old logs. I tried that with no result. Is there any way I can reduce the disk space that the relay logs take?

    Read the article

  • Does Linux GZip Zip the File in Place or create a new file

    - by Russ
    I have a 1.5TB size text file that I need to gzip down, the current drive it is on has little to no space left. I have another drive with 400G left on it. My question is, if I gzip the file, will it require more space on the drive that it resides? Or can I direct the output to the drive with available space?

    Read the article

  • What is the IPv6 equivalent to IPv4 RFC1918 addresses?

    - by Kumba
    Having a hard time wrapping my head around IPv6 here. A lot of the lingo seems targeted at enterprise-level IPv6 deployments, discussing link-local, site-local, global unicast, scopes, etc. Not a lot of solid information on really small networks, like home networks. I want to check my thinking and make sure I am getting the correct translations from IPv4-speak to IPv6-speak. The first question is, what's the equivalent of RFC1918 for IPv6? Initial searches suggested there was no equivalent. Then I stumbled upon Unique Local Addresses (RFC4193), and that states that all ULA's should be assigned the prefix fc00, followed by a 40-bit random number in the routing prefix. This random number is to "prevent collisions when two IPv6 networks are interconnected" -- again, another reference to an enterprise-level function. If I have a small local LAN at home, numbered using 192.168.4.0/24, what's my equivalent in IPv6's ULA scope? Assuming I will never, ever, tie that IPv6 address into the real internet (a router will NAT & firewall it), can I ignore the RFC to an extent and go with fc00::4:0/120? It also seems that any address in fc00::/7 are to be globally routable. Does this mean I'll need extra protections so my router would not automatically start advertising these private IPv6 addresses to the world? Second question, what's this link-local thing? Reading suggests a default-assigned address in the fe80::/10 range that has the last 64bits of the address comprised of the interface's MAC address. Seems to be required, too, but I'm annoyed by the constant discussion of it in relation to enterprise networks. Third question, what is scope id for? Seems to be yet another term tossed around in relation to enterprise networks, especially when interconnecting them, but almost no explanation on the smaller home network level. Can I see a scope ID AND CIDR notation used together? I.e., fc00::4:0/120%6, or are scope IDs only supposed to be applied to a single /128 IPv6 address?

    Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >