Search Results

Search found 5983 results on 240 pages for 'music on hold'.

Page 138/240 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Windows 7 Intermittent Connection Issues (Continuously "identifying")

  - by andrewktmeikle

  I have an issue solely with my desktop windows 7 machine on my network (the network has multiple different devices, on the same and different operating systems) and the issue is that irregularly, although sometimes frequently, I briefly get disconnected from the internet (briefly is for around 5-10 seconds). However, I never loose the bars on the wifi thing, eg I don't get the yellow triangle, but it goes to the identifying stage and then reconnects. The reason I noticed the problem was when I was streaming music it would stop and I would refresh the page and it would start working again ( turned out it was because it took that amount of time to get connected again). So my question is, what would cause the intermittent issues and start the "identifying" process again. I don't think its my router, because no one else is having problems, so the other option is that its a problem specifically with my machine. I'm connecting to a Netgear DG834GT router, and I'm using a Edimax Wireless-N150 USB Adapter. Anyone have any ideas?

  Read the article

• In Windows 8.1, how can I configure File History to backup *some* of my SkyDrive folders?

  - by Matthew

  I want File History to back up all of the folders in my SkyDrive except for the media folders (Music, Pictures, Videos, Podcasts). My media folders are "available online only", the rest of "available offline". Right now File History does not back up any of the content in my SkyDrive, and I can't seem to find a way to configure which folders it backs up. I found some sources that say if my SkyDrive is available offline, it will be added to File History. But I don't want to make my entire SkyDrive available offline, just the non-media folders.

  Read the article

• How to zip and rename a directory tree

  - by Kev

  I have a lot of music in a lot of directories: ./artist1/album1/*.mp3 ./artist1/album2/*.mp3 ./artist1/album3/*.mp3 ./artist2/album1/*.mp3 ./artist2/album2/*.mp3 ./artist3/album1/*.mp3 ./artist3/album2/*.mp3 ... ... How can I zip them to this: ./artist1/album1/*.mp3 => ./artist1-album1.tar.gz ./artist1/album2/*.mp3 => ./artist1-album2.tar.gz ./artist1/album3/*.mp3 => ./artist1-album3.tar.gz ./artist2/album1/*.mp3 => ./artist2-album1.tar.gz ./artist2/album2/*.mp3 => ./artist2-album2.tar.gz ./artist3/album1/*.mp3 => ./artist3-album1.tar.gz ./artist3/album2/*.mp3 => ./artist3-album2.tar.gz ... ... I'd like one-line-command or a simple script.

  Read the article

• Lenovo G500 Re-booting failed

  - by Sune

  I have a Lenovo G500. Yesterday it asked me to reboot the system. I did. Now it wont come back on. I have tried everything I read online like taking out the battery and holding the power button in for 20 seconds, then switching on the pc with only the ac adapter plugged in. I still only see the backlight of the pc, nothing else. I also tried to hold in the Fn key and tried all other F keys (F2, F12, etc.) I also pressed that little button next to the power button, but nothing is responding. Please help.

  Read the article

• Less daunting front end for SQL Server

  - by Martin

  We currently have a few users who have been using Access very succesfully to throw around large amounts of data. We've now got to the point where the data is just too large to be held in Access, as well as wanting to hold it in a single place where multiple users can access it. We have therefore moved the data over to SQL Server. I want to provide a general tool that they can use to view the data on the server and do some simple things like run queries and filters and export the data for offline manipulation. I don't want the support headaches that might come with rolling out SQL Management Studio, and neither do I want to have to create an Access database with links for each current database or ones that are created in the future. Can anyone recommend a simple tool that will connect to a server, list all the databases and allow a user to drill into a table and look at the data. Many thanks.

  Read the article

• MP4 video - edit audio track

  - by Maccaius

  I have recorded some nice sport videos with mz GoPro HD action camera. I would like to edit the audio track. I dont want to get rid of the whole audio track - just erase small parts (e.g. compression artifacts or me saying some swearwords). When the original audio track is cleansed, Id add another music layer in FCE afterwards. I'd really like to edit the audio like in a WaveLab etc. Any ideas?

  Read the article

• Why is my Windows XP not allowing me to turn on sounds?

  - by Rookie

  This started to happen few weeks ago: Every time I start up Windows, the global sound volume is set to muted. I was able to just click the muted button to un-muted and that was fine, until now: Now I cant even click that unmute button! Every time I click the unmute button, I hear a split of a second the music I play, then it stops immediately. It is maybe 10 milliseconds until it mutes it again. In theory I could write a program to click that button continuously, but is there another solution to fix this? Or is this a broken hardware problem and Windows knows it and therefore doesn't allow me to enable sounds or my computer would break apart? Any ideas what could be causing this? A weird virus that's purpose is to piss me off? That weird this whole issue is, really, doesn't make any sense at all.

  Read the article

• How to "paint" the data layer of a CD using a CD drive?

  - by Jens

  I am looking for software to "paint" geometric shapes, dots or lines on the data layer of a writable CD (or DVD) using a standard drive. These do not have to be visible to the naked eye; I'd try to abuse the small dot size on the CD for some scientific measurements. I am aware of the "LightScribe" feature of some drives and that is not what I am looking for. Most of the software available is of course limited to write music or data, on does not offer the low-level "place a dot at this radius, this angle"-functionality. Is there something out there for me?

  Read the article

• When should .local be used?

  - by hydroparadise

  So, I've set up a few Win Servs in my time and always did the .local thing when there was a router that sepearated my internal from external networks. Now that I'm setting up an *nix box for the first time, does this concept still apply? Do I still want my FQDNs (/etc/hostname) to show .local or .com for all my machines (mixed: linux servers, win workstations) inside of my network. This question comes in context of always having Active Directory hold my hand every step of the way, where now I'm setting up an DNS machine manually.

  Read the article

• Restore Point area getting deleted

  - by PaoloFCantoni

  Hi, I'm running a multi-boot scenario (which I have been successfully on a number of machines for a number of years). I have Windows 7 (32 bit) on one partition and Windows 7 (64 bit) on another and a common data partition (which happens to store the user hives for each OS instance). For some reason, on one particular machine (a HP Pavilion notebook) the restore points get trashed after a reboot. I can create them (both manually and automatically), but after some (but not all) reboots the restore points get trashed. I have all three partitions set (on both OSs) to hold restore information. This setup has worked successfully on other machines for at least 12 months. I'm out of ideas... I DO need the restore points as I do "bleeding edge" stuff and they've saved my bacon on other machines in the past... TIA, Paolo

  Read the article

• Strange zsh autocomplete behaviour.

  - by Leda

  Every time I use tab autocompletion with zsh instead of completing the current string, it gives me a new string + options to complete. It's hard to explane, so here is an example. This is what would happen if I type 'ls Nue' and hit tab. [me@mbp:/Volumes/hdd/music]: ls Neu ls Neu Neuraxis/ Neurosis/ Neutral\ Milk\ Hotel/ If I delete the second `ls Nue', I am unable to delete the white space and the first. If I hit return, it is as if I have just entered a blank line. Does anyone know what is going on.

  Read the article

• Alternatives to y4mstabilizer; deshaking video

  - by Vi

  "Deshaking" means fixing the video captured from camera hold in hands. Is there open source video deshaker apart from y4mstabilizer from mjpegtools? Patch for mencoder is preferred. My current command line for processing video looks like: mplayer video_from_camera.avi -nosound -vo yuv4mpeg:file=/dev/stdout -really-quiet | y4mstabilizer -n -a 0.8 -r 30 -s 100 | mplayer -cache 1000 /dev/stdin -noconsolecontrols -vf crop=500:380:70:50,denoise3d=3:3:5:5 -vo yuv4mpeg:file=temporary.yuv y4mstabilizer is itself very unstable and often crashes (and it didn't work at all until I have patched memory allocation in it).

  Read the article

• Windows 7 Desktop as Bluetooth Mixer

  - by J.R. Lillard

  I would like to stream all the audio from my Droid X2 to my desktop running Windows 7 via bluetooth. When I pair the two devices I can make this work but the audio plays through the internal speakers. I am actually wanting to listen to everything through a pair of bluetooth headphones. The end result would be that I could listen to music from my phone but easily pause it to listen to audio from the desktop instead. So far I have not had any luck. I thought about connecting the line out to the line in so I could monitor the line in from my headphones. My current setup is wiring the phone to the line in and then monitoring the line in through the headphones. I'm just wanting to eliminate the wire and go wireless the whole way. Is there something in Windows that prevents it from taking an inbound audio stream and sending it out another device?

  Read the article

• Clone drive in Windows

  - by ERJ

  I have two 2 TB external USB hard drives, call them HD1 and HD2. HD1 is USB 2, HD2 is USB 3. Each drive contains exactly one NTFS partition. I want to clone HD1 to HD2, because it's newer and much, much faster. What's the best way to do this? I don't want to do a copy-and-paste, I want to clone the whole partition. The new drive is actually a few bytes larger, so this should be possible? I don't have a second drive that can hold the image, so it would have to clone directly to the other disk (not to a file). How can I accomplish this on Windows 7? I know about Clonezilla but I would prefer not to have to boot from a CD or anything, as I don't have the capability to do that right now. I want to know if there's a way to do this while running Windows.

  Read the article

• HP Pavillion dv6 laptop - 15 beeps on startup and a black screen?

  - by dunc

  Usual story - girlfriend's step-brother's laptop is broken. I don't know a huge amount about what occurred before it broke, but I do know the following: When you try to turn the laptop on, it beeps 15 times exactly. The screen remains black. The LED on the Caps Lock key flashes continuously. If left on, the laptop never boots - as far as I can see. If left on, on a stable surface with decent ventilation for a relatively short period of time, the laptop (below keyboard, but not where the RAM/HDD are) gets very hot. I've tried doing what most websites appear to recommend for similar problems, which is to disconnect AC and battery then hold the power button down for a minute before reconnecting the AC and trying to turn the laptop on - no difference. EDIT I've also tried re-seating the RAM, to no avail. Any ideas? Thanks in advance,

  Read the article

• How can I tell what command is running on the remote end of an ssh connection?

  - by user268385

  Tl;dr - how do I find the name of the command (eg $BASH_COMMAND) running on the remote end of an ssh connection? ... My example setup is two tmux vertical panes, LH pane runs a local vim session with vertical split, RH pane runs an ssh session running vim, again with a vertical split. Using tmux-navigator I can navigate from left to right over the first 3 vim buffers, but the 4th (far right hand one) is inaccessible. The reason for this is that tmux-navigator tests the value of 'pane_current_command' and compares it to 'vim' before deciding which keystrokes to dispatch. On the right hand tmux pane, the current command is 'ssh' and not 'vim'. What I want to do is test for (pane_current_command =~ 'ssh'), and if so, examine the command that is running on the far side of the connection? I cannot find a way to get hold of this, so any suggestions would be welcome? For information, the problem is almost the same as this one, but without the nested tmux sessions: https://github.com/christoomey/vim-tmux-navigator/issues/12

  Read the article

• Does Windows 8 support the "start in [folder]" property for shortcuts?

  - by FumbleFingers

  I use Foobar2000 to play music, and for years now I've run it in what they call "portable mode". What that means is that the program itself isn't actually "installed" in the traditional Windows sense. All "non-system" dll's required by the application are in the same folder as the executable; earlier versions of Windows find them there, and everything runs fine. But Windows 8 fails because it doesn't find them. I want things set up this way because I keep Foobar2000 on a portable external hard drive, so I can just move it between different computers without having to go through the Windows install process. With all previous versions of Windows, I could either directly run the application from File Explorer, or create a shortcut on the desktop with the "start in folder" property set to the actual folder containing the program. I can still use the first method, but I want a shortcut! Is there any way to do what I want?

  Read the article

• Samba+Windows: Allow multiple connections by different users?

  - by rgoytacaz

  Hello there, I have a machine running Ubuntu with Samba that I use to share stuff with my family's Windows machines in our local network. Currently they access a share for movies/music/etc with one user. I want to connect them to another share as a different user (for example, user "goytacaz"). When I try connecting to this new share, Windows gives me "Error 1219" and complains about multiple connections by the same user. How do I get my machine to accept multiple connections by the same user?

  Read the article

• Upgraded to a GTX 580 - no video signal on boot

  - by MGOwen

  I have: New Corsair 550w PSU (should be more than enough) AsRock H61M u3s3 mobo (with latest updated BIOS) Just replaced my faithful HD 7790 GPU with a refurbished EVGA GTX 580 1.5GB. When I boot, it sounds like the PC boots to windows, and the 580's fan is spinning, but I can't get any video signal from the card. Old card and integrated graphics still work fine (when I replace and use those instead). I am using the DVI ports on the card with a DVI-VGA adapter until I can get my hands on a mini HDMI adapter tomorrow. Anyone ever heard of a GPU needed something special to make the VGA signal work? Hold down a key on startup or something? I can't even find a manual for this card.

  Read the article

• Recommendations for SSD for server and database use?

  - by Tony_Henrich

  SSDs are a new technology and they are constantly improving. A lot of the posts here were posted in 2009 when SSDs where less mature and not as fast. What was recommend back then is probably out of date today because of better options. The SSD is used to hold SQL Server databases. Size is probably 128G. The database is used with a CMS and web server so web pages need to get their data and render as fast as possible. Which modern SSD is recommended for such a use? Is there an SSD better than Intel X-25 E/M in terms of performance/cost? (I am also evaluating cost between : RAM + UPS (semi persistent) vs SSD for same amount of gigabytes. No RAID is involved)

  Read the article

• How can I use the Band Pass Filter in GarageBand?

  - by Another Registered User

  What I want to do: I have a music WAV file and want to put a Band Pass Filter over it, to filter out anoying high frequencies. I was reading on the net that there is a "AuBandPass" plugin in Mac OS X. I just can't figure out how I could use that in GarageBand. I don't even find the effects at all. I created a new GarageBand file and dropped the WAV file in there. Now I can play that song in GarageBand. What must I do next?

  Read the article

• Connect to my virtualbox mysql server

  - by WebweaverD

  I wonder if someone here could help me, this is my set up: I am on a windows 7 machine running a ubuntu virtualbox as my local web server and database server (mysql). I have just got hold of a copy of Komodo which i am running on my windows machine which I would like to hook up to my database. The fields it needs are hostname, port, socket, username and password. I know the username/password but am unsure how to find out what to put for the other fields. The ubuntu vb has an ip of 192.168.0.10, which is in my hosts file as http://swishprint.dev I hope I have asked this in the right place, any help much appreciated.

  Read the article

• How to solve the problem that Chrome doesn't obey "Show Window side by side" on Win7?

  - by Jian Lin

  If I bring out Firefox and Chrome, and right click on the task bar and choose "Show Windows side by side", Chrome will not be arranged side by side. But if it is Firefox and IE, then the 2 windows will in fact be arranged side by side. If it is Chrome showing and we press and hold "Window key" and LEFT ARROW, then in fact it does move to the left as a half size window. So Chrome partially work on Win7 for the expected behavior. Any method to make it work for the first case? thanks.

  Read the article

• How to apply a folder template to more than one selected folder in Vista?

  - by Albic

  I would like to apply a folder template to a number of folders. I selected the folders, opened the properties, selected the folder template (e. g. Music Details) and clicked OK. When I checked the folders I noticed that the template was only applied to the folder I performed the right click to open the properties on. The other folders remained untouched. I can't apply the template to the parent folder and use the "Also apply this template to all subfolders" option because the template should only be applied to specific folders and not all. Going over each folder in not an option because it's a large amount of folders. Is it possible to apply a folder template to more than one selected folder at a time?

  Read the article

• Sync content from my iPad to iTunes? i.e. "reverse" syncing

  - by Jim

  I recently had to reset my PC back to factory settings which lost my entire iTunes library. I still have my music and other files on my iPad and want to sync it back to the PC. Upon syncing it only gives me two options. "Erase and Sync" which replaces the contents of my iPad with the blank iTunes library, or, "Transfer Purchases" which reads like it will only transfer the purchases from iPad to iTunes. I would like to avoid re-burning my entire CD library to iTunes all over again. Is there a way for me to sync the iPad to the iTunes library (aka the computer)?

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >