Search Results

Search found 4517 results on 181 pages for 'mvvm light'.

Page 138/181 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• No digital audio output with Asus Xonar DG

  - by Lunatik

  I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

  Read the article

• Brick-level backup and restore with exchange 2007

  - by V. Romanov

  In the company I'm working for, we use exchange 2007 and backup it using netbackup. The backup is a daily complete backup of the information store and the direct corollary of this is that restores are hell. We need to restore the entire information store (over 80 gb), somehow merge it back with the original store, which causes problems. Alternatively, we tried using QUEST software to emulate exchange and restore mails from the emulation. However, this proved unreliable. The main problem with this entire situation is that we have to restore the whole information store and walk it through the restore process manually, and its quite absurd to be forced spend more than a day restoring even one erased email. (we have erased mail retention, but sometimes we need to restore older mail). in comparison, back in the day of XCH2003 and backupexec 12, we had complete brick level backup and restore at the push of a button. I've spoken to one of our chief sysadmins who claimed that the official response from microsoft to this issue was - "sorry guys, no brick level backup in XCH2007" which sounds ridiculous to me. Can someone shed some light on the situation? How do you backup your exchange2007 stores? Can you restore a single email quickly? A mailbox, perhaps?

  Read the article

• Kernel hacking methodology - how to find out where to hack the linux kernel

  - by Flavius

  I have a throw-away cheap laptop I'd like to twiddle around, a Thinkpad SL 500. What bothers me are two leds, the one for wireless connectivity, and the one for hibernation, which don't light up at all, although they're functional, I've tried it on windows. So I would like to write a kernel driver for them, nothing big, it just looks like a good idea to play around with the kernel. My question is what methodology should I follow systematically to find out what devices are responsible for those leds (in general, not necessarily specific to my hardware), and what drivers are responsible for the other two leds that work, bluetooth and the battery indicator? And when I say methodology, I really mean the methodology, step by step, with reasons for each step, like in the answer I've gave to someone else over here: What does && mean in void *p = &&abc; I am profficient at fgrepping through big code repositories, using static code analysers & co, but I think my lack of hardware knowledge hinders me on this problem. PS: I'm using ArchLinux, so almost the latest kernel version.

  Read the article

• VMWare Newbie - looking for hardware recommendations and help :) [closed]

  - by Dan

  I am looking for some hardware recommendations on an upcoming virtualization project. We are a small company (80 users - 25 in site 1, 55 in site 2) currently using Windows Server 2003 - no VM servers yet. Our AD is setup where site 1 is the root domain and site 2 is a subdomain/subnet - connected by T1 and VPN for failover. The current DC's also server as file servers, print servers, AntiVirus servers. Email is in the cloud. Additionally then in site 1 we have 3 additional member servers - one running IBM Websphere for a customer specific app, one running Infor PowerLink (no real heavy load) and another that we use for Virtual Studio apps and also runs DirSync for Exchange Online. No heavy workloads on any of these machines really. We also have an AS400 box that we run ERP/CRM software on that site 2 connects to over the WAN link. In site 2 we also have a SQL machine that runs on Win2K server. Database files are not large less than 5 GB. Light to Medium workload on this machine. File servers in each site store less than 500 GB data and probably won't grow to more than 1TB in the next 5 years. I am looking to go to VMWare in both sites and virtualize all servers. What recommendations do you have for server, storage hardware? Is it safe to virtualize all of your DC's? Any help or advice would be greatly appreciated. Thanks.

  Read the article

• Windows, never "lose focus" of the current window

  - by Mazura

  I want the task bar to light up orange and never lose focus to anything. If I'm installing something and then go play a game at some point it will drop out to the finished instillation. Also, if installing multiple programs at once my 'next' button can all of sudden become "click here to install this crappy toolbar" of another program's install. Of course there are settings for some programs to not "lose focus" or "stay on top" but I really want windows to handle it. If its somehow an exe called say, Taskswtich.exe, I could possibly use Process Blocker however I'm assuming its part of a function call or some such. For XP I found this: How to disable auto focus of opened Windows applications? but what about Windows7? And this old post Preventing applications from stealing focus with a bunch of long answers that say "no". I'd appreciate this not being merged with a 4 year old question. I'd like to avoid 3rd party software. This is 2014, don't we know how to hack windows yet?

  Read the article

• Configure Cisco Pix 515 with DMZ and no NAT

  - by Rickard

  I hope that someone could shed some light over my situation, as I am fairly new to PIX configurations. I will be getting a new net for my department, which I am going to configure. At my hands, I have a Cisco PIX 515 (not E), a Cisco 2948 switch (and if needed, I can bring up a 2621XM router, but this is my private and not owned by my dept.). The network I will be getting is the following: 10.12.33.0/26 Link net between the ISP routers and my network will be 10.12.32.0/29 where GW is .1 and HSRP roututers are .2 and .3 The ISP has asked me not to NAT the addresses on my side, as they will set it up to give 10.12.33.2 as a one-to-one nat to a public IP. The rest of the IP's will be a many-to-one NAT to another public IP. 10.12.33.2 is supposed to be my server placed on the DMZ, the rest of the IP's will be used for my clients and the AD server (which is currently also acting as a DHCP server in the old network config with another ISP). Now, the question is, how would I best configure this? I mean, am I thinking wrong here, I am expected to put the PIX first from the ISP outlet, then to the switch which will connect my clients. But with the ISP routers being on a different network, how will the firewall forward the packets to the other network, it's a firewall, not a router. I have actually never configured a pix before, and fortunately, this is more like a lab network, not a production network, so if something goes wrong it's not the end of the world, if though annoying. I am not asking for a full configuration from anyone, just some directions, or possibly some links which will give me some hints. Thank you very much!

  Read the article

• Acer LCD says "no signal"

  - by Ken

  I have an Acer 24" LCD (model "AL2423WDR") that's about 3 years old. It worked perfectly for most of its lifetime so far. Recently it started giving problems. When I turn it on, it either says "no signal" on the display, or the power light goes yellow (as if in power-saving mode). This happens with both DVI and VGA (both of which worked fine before), and stranger still, the 4 buttons on the front, for accessing the on-screen menus, don't do anything. I've also tried different computer hardware and software (PC/Mac, Linux/MacOS), but nothing has worked. I've tried power-cycling it (with both the power button and the power switch), and also unplugging it entirely. The nonworking buttons suggest to me an issue with the firmware. I found a place on Acer's website that says I can send it in to have it fixed, at my expense, but I'll avoid that if I can. Is there a way to fully reset it manually? Or is there something else I can try?

  Read the article

• Cisco Pix 515 ip addressing

  - by Rickard

  I have just gotten my hands on a Cisco Pix 515 (not 515E) with 3 interfaces, and are just about to start some labs. In my lab, I am using a real life scenario from an actual setup at work. As I have no access to the device at work, I am simply trying to replicate the scenario by trial and error. At work, we are given two IP addresses from the provider, which is 1-to-1 nated addresses. The addresses we are allowed to use are: 10.131.35.4-5/29 Now, we have 3 servers on a DMZ, 192.168.2.2-4/24 and 17 client computers on 192.168.1.100-117/24 aswell as some static addressed devices on 192.168.1.8-18/27 My question is, how would I best set up so that the machines on the DMZ get's translated to 10.131.35.4 and the machines on 192.168.1.* will be translated to 10.131.35.5 I don't expect or want anyone to give me a fully functional config, I may learn from it, but I'd prefer to just have some advices or maybe a guide on how to set it up. I hope someone can shed some light over my situation, have been looking through google but I guess I don't the searchwords I'm using isn't too good as I can't find any good clues. THank you very much! PS. Maybe I should add, I am not unfamiliar with the Cisco CLI, as I prefer using that before any gui's. So not really looking for any solutions for the ASDM. DS.

  Read the article

• Windows XP can use a wired network port, but MacBook (OS X) fails on the same port

  - by Dean Hill

  I wired the Cat5 in my house seven years ago. The wired ports have worked fine with both my Windows XP laptop and MacBook. My wireless network also works fine, but I like to use wired occasionally. One of the Cat5 runs wasn't terminated with a jack, so I recently terminated this wire with a port/jack on the wall end and a standard Cat5 plug on the end that plugs into my router. This is the same setup as my other runs. Unfortunately, the MacBook isn't working well with the new wired port. The OS X Network System Preferences show the IP, Subnet, Router, etc., and everything looks fine. A "netstat -ibd" shows no errors or dropped packets. However, when I open a page in Safari, the status says "Contacting 'www.google.com'" and appears to hang. If I wait for a couple minutes, part of the Google page starts to display, but it is still not the full page load. When I use a Windows XP laptop on the same wired port, everything works fine. An internet speed test shows good results and all web pages load fine. A "netstat -e" under Windows shows no errors. I've used a Cat5 tester, and the cable tests fine (wires 1-8 light up in sequence). I've replaced both the port/jack and the connector twice to make sure I wired things correctly. I'd really like this Cat5 to work with the MacBook (and I'm trying to avoid running a new length of cable). Any ideas what the problem could be?

  Read the article

• PC won't boot after hanging during Windows 8 automatic repair [closed]

  - by Mun

  I've got a custom built PC using an ASUS P5E motherboard and Intel Q6600 CPU. I plugged in my mp3 player to the USB port yesteday, and when I came back to the machine after about an hour or so, the Windows 8 automatic repair message was on the screen. It seemed to stick there for an hour, after which I decided to just hit reset and try and figure out what was going on. However, the machine rebooted to a black screen before even getting to the BIOS, with the monitor lights just blinking indicating there was no signal. Tried powering down completely, waiting a few minutes and then powering back up again with no difference; black screen with monitor lights blinking. Tried leaving it on for a while and then pinging from another machine or accessing it via something like LogMeIn, but everything showed the machine as being offline. There were also no error beeps or anything like that. Also tried unplugging all of the memory and rebooting and that also caused no error beeps. Removed one of the display cards and left the other one in there, and still only a black screen. I'm inclined to think that the motherboard or CPU is fried, but there is no indication of damage on any components and the CPU fan seems to be working fine as it always has, so overheating seems unlikely. It's also plugged into a surge protector. The motherboard also has a green light which still lights up. As everything was still working fine before hitting the reset button during Windows 8 automatic repair screen, at which point everything stopped working, it seems unlikely that this problem is down to component failure. Has anyone else experienced anything like this or have any ideas on what could be causing this behavior?

  Read the article

• MySQL Workbench is not finding MySQL service? [closed]

  - by PhADDinTraining

  I set up a local MySQL server, currently with no databases. I'm trying to create a new server instance profile in MySQL Workbench to manage the server, and during the Create New Server Instance Profile wizard, it gets to the Windows Management section and tells me that No MySQL service found. I went into Task Manager and found the process mysqld.exe to be running, under the user name of NETWORK SERVICE. Then I went into the Services tab and found that MySQLServerName (I custom named the Windows service) is also there, and status is running. I ran cports and looked at what ports mysqld.exe is using, and ran a telnet command on that port. It's reporting that the port is being listened in on. I then ran the MySQL Command Line Client to be sure, and after \r it gives me a proper connection ID and a list of databases (NONE at this point). But with all this, I can't make the wizard find a running service. I've Googled this and found no answers, so please, if someone would help shed some light on this issue that'd be great!

  Read the article

• Ubuntu server or Debian server (to run C++ apps developed on Ubuntu)

  - by skyeagle

  I have written a number of C++ server side daemons for my website, using my Ubuntu 9.10 dev machine. The C++ apps I mentioned above are "GUI-less" daemons (and libraries used by the daemons). I am now about to host my website and need to decide whether to go with Debian server or Ubuntu server. In a nutshell, here is the situation: I developed on Ubuntu desktop because I preferred the more friendly GUI I would like to deploy on Debian Server because of the (perceived?) robustness of the Debian server over Ubuntu server (I may be totally wrong here - and in fact, this is really what this question is all about) If Debian server is indeed more robust than Ubuntu server, then I have no choice but to go with Debian server - BUT, will my Ubuntu developed C++ apps run on the server? (or do I need to recompile them on the server? (I'd HATE to have to do this, because I want to keep the server machine clean and light - no GUI, no dev tools etc). This last question is really about binary compatability between Ubuntu and Debian. I want the server to be robust, secure and stable, and simply act as a server (i.e. LAMP and very little else - no GUI etc). Given that requirement, and the fact that I need to run my C++ apps (developed on Ubuntu 9.10), I need advice on which OS to choose for the server. Ideally, any advice will be backed with a reason. I am particularly interested in hearing from people who have been in an identical situation, or done something similar.

  Read the article

• Looking for equivalent of ProxyPassReverseMatch in Apache to fix missing trailing forward slash issue

  - by Alex Man

  I have two web servers, www.example.com and www.userdir.com. I'm trying to make www.example.com as the front end proxy server to serve requests like in the format of http://www.example.com/~username such as http://www.example.com/~john/ so that it sends an internal request of http://www.userdir.com/~john/ to www.userdir.com. I can achieve this in Apache with ProxyPass /~john http://www.userdir.com/~john ProxyPassReverse /~john http://www.userdir.com/~john The ProxyPassReverse is necessary as without it a request like http://www.example.com/~john without the trailing forward slash will be redirected as http://www.userdir.com/~john/ and I want my users to stay in the example.com space. Now, my problem is that I have a lot of users and I cannot list all those user names in httpd.conf. So, I use ProxyPassMatch ^(/~.*)$ http://www.userdir.com$1 but there is no such thing as ProxyPassReverseMatch in Apache. Without it, whenever the trailing forward slash is missing in the URL, one will be directed to www.userdir.com, and that's not what I want. I also tried the following to add the trailing forward slash RewriteCond %{REQUEST_URI} ^/~[^./]*$ RewriteRule ^/(.*)$ http://www.userdir.com/$1/ [P] but then it will render a page with broken image and CSS because they are linked to http://www.example.com/images/image.gif while it should be http://www.example.com/~john/images/image.gif. I have been googling for a long time and still can't figure out a good solution for this. Would really appreciate it if any one can shed some light on this issue. Thank you!

  Read the article

• Debugging a Drobo that chokes Windows 7x64 When Plugged In

  - by Pridkett

  I've had a love hate relationship with my Drobo for a long time. After two years of using it on a Linux box, I moved it over to a Windows 7 machine where it seemed to work just fine for a long time, but it was under very light usage. Mainly backups that never actually happened. Recently I began using it for additional backup services (through CrashPlan, which is great). This means the Drobo gets a lot more usage. Also it means that something interesting happens, the Drobo can choke my system on startup. Here's what I mean: Start computer without Drobo plugged in, CrashPlan and Drobo Dashboard services disabled: 105s Start computer with Drobo plugged in Crashplan disabled, Drobo Dashboard enabled: 250s (and 1 cpu at 100% for a very long time, drobo churning) Start computer with Drobo plugged in, CrashPlan and Drobo Dashboard disabled: 250s (1 cpu at 100% for a very long time, drobo churning) Start computer with Drobo plugged in, Crashplan and Drobo Dashboard enabled: 300s (1 cpu at 100% for a very long time, drobo churning) If I yank the USB plug on the Drobo the CPU usage goes down to nothing very quickly. The slow startup in the fourth scenario is because CrashPlan is trying desperately to load stuff up on the H: drive before it gives up, so I've disabled it for the time being. So here's my question: What the heck is going on when I plug the drobo in? I've fired up Process Explorer and see that the System process is hogging the CPU, specifically it's an ntoskrnl.exe/KdPollBreakIn thread that's going ape. Is this something that's wrong with Drobo? Windows? Any idea on how to find out? If it matters, here's tech info: Athlon 64x2 4400, 2GB RAM, Win7 Ultimate, Drobo USB (2x1TB, 2x320GB)

  Read the article

• Simulate SNMP traps to test surveillance

  - by jishi

  I'm trying to use Net-SNMP on Windows to emulate a trap that should trigger an alarm on our surveillance system. This is the setup: Windows 7 client that sends the trap Net-SNMP as software for sending the trap Linux with Adventnet ManageEngine OpManager as NMS (not relevant) This is what I'm trying to accomplish send trap with OID .1.3.6.1.4.1.5089.1.0.1 (according to the MIB I have loaded into my NMS) and just some sort of message into it to see if I can get any alarm in my NMS. I can see that I actually send a trap in my firewall, but I have no idea what it contains. This is my attempt so far: snmptrap.exe -v 2c -c xxxxxxx 192.168.100.65 '' 6 0 .1.3.6.1.4.1.5089.1.0.1 s "123456" However, I can't seem to find any reasonable documentation with examples for snmptrap. Basically, I need to know what: '' <- why do I need this? I can omit it and it will still send a trap 6 <- Enterprise gneric trap, I assume. Is this correct? 0 <- I have no idea, I need some sort of value for this .1.3.6.1.4.1.5089.1.0.1 <- the enterprise specific OID I assume, should this be followed by some more numbers s <- indicates string "123456" <- just a random test-string... This doesn't make much sense to me, and if anyone can shed some light on this I would be very grateful.

  Read the article

• "Server Unavailable" and removed permissions on .NET sites after Windows Update [closed]

  - by andrewcameron

  Our company has five almost identical Windows 2003 servers with the same host, and all but one performed an automatic Windows Update last night without issue. The one that had problems, of course, was the one which hosts the majority of our sites. What the update appeared to do was cause the NETWORK user to stop having access to the .NET Framework 2.0 files, as the event log was complaining about not being able to open System.Web. This resulted in every .NET site on the server returning "Server Unavailable" as the App Domains failed to be initialise. I ran aspnet_regiis which didn't appear to fix the problem, so I ran FileMon which revealed that nobody but the Administrators group had access to any files in any of the website folders! After resetting the permissions, things appear to be fine. I was wondering if anyone had an idea of what could have caused this to go wrong? As I say, the four other servers updated without a problem. Are there any known issues involved with any of the following updates? My major suspect at the moment is the 3.5 update as all of the sites on the server are running in 3.5. Windows Server 2003 Update Rollup for ActiveX Killbits for Windows Server 2003 (KB960715) Windows Server 2003 Security Update for Internet Explorer 7 for Windows Server 2003 (KB960714) Windows Server 2003 Microsoft .NET Framework 3.5 Family Update (KB959209) x86 Windows Server 2003 Security Update for Windows Server 2003 (KB958687) Thanks for any light you can shed on this.

  Read the article

• What does this strange network/subnet mask mean?

  - by dunxd

  I'm configuring a new ASA 5505 for deployment as a VPN endpoint in a remote office. After configuring it and connecting the VPN, I get the following messages: WARNING: Pool (10.6.89.200) overlap with existing pool. ERROR: IP address,mask <10.10.0.0,93.137.70.9> doesn't pair 10.6.89.200 is the address I configured for the ASA. It has the subnet mask 255.255.255.0. The ip address 10.10.0.0 corresponds to one of our subnets, but it certainly wouldn't have a subnet mask of 93.137.70.9. That looks more like a public IP address (and resolves to an ADSL connection somewhere). I am sure if we had such a subnet configured, that it would indeed overlap with 10.6.89.200. There is no reference to 93.137.70.9 in the config of this ASA or our head office ASA. Can anyone shed light on what is going on here? The sudden appearance of a strange subnet mask is a bit alarming.

  Read the article

• CUPS causes printer to click and doesn't print

  - by Pez Cuckow

  I'm suffering a strange problem with my Cannon iP4850 when trying to use CUPS on a Raspberry Pi (this is not RPi specific, please do not vote to move it). When I plug the printer into my Laptop (OSX) or my Desktop W7 it identifies as a iP4800 and prints perfectly. So I plug it into the Pi (running debian), set it up in CUPS enable sharing and can now see the iP4800 series shared on the network. However if I print to it (using AirPrint etc...); the file gets to CUPS safely (shows in the queue) but when it tries to print the printer clicks (like a loud thunk) 3/4 times and then gives in, with a double amber flashing light. In cups it shows as job completed. Do you know why using the pi and cups would cause what appears to be a hardware fault and what I can do to fix the problem or to provide further debug info? Thanks for your time! Description: Canon iP4800 series Location: Lounge Driver: Canon PIXMA iP4800 - CUPS+Gutenprint v5.2.9 (color, 2-sided printing) Connection: usb://Canon/iP4800%20series?serial=2239B2 Note: I've tried deleting and re-adding the printer to the Laptop, Desktop and PI and the results are always the same Log for plugging in printer and printing (attempting to) something until the printer turned off again pi@pezpi /var/log $ dmesg [ 7284.176336] usb 1-1.2: new high speed USB device number 8 using dwc_otg [ 7284.279703] usb 1-1.2: New USB device found, idVendor=04a9, idProduct=10d5 [ 7284.279750] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7284.279771] usb 1-1.2: Product: iP4800 series [ 7284.279786] usb 1-1.2: Manufacturer: Canon [ 7284.279800] usb 1-1.2: SerialNumber: 2239B2 Setting cups to verbose: Change loglevel in cupsd.conf to debug (or debug2) pi@pezpi /var/log $ sudo vim /etc/cups/cupsd.conf pi@pezpi /var/log $ sudo /etc/init.d/cups restart [ ok ] Restarting Common Unix Printing System: cupsd. pi@pezpi /var/log $ Log from $ /var/log/cups/error_log is at http://pastebin.com/7VZMRMrG (too large to post here) The log contains - in order (deleted the log and then did the beneath) Restarting the cups server Attempting to print a test page x2 Printing from 192.168.1.90 via AirPrint Printing from 192.168.1.90 via Network Print Turning the printer off and on again

  Read the article

• Mail to Mailenable group sometimes bounces back because it cannot find one of the group members

  - by Stanley

  I am using MailEnable Enterprise Edition 6.53. On one of my PostOffices I have a group address set up with 5 members in the group. Under normal circumstances when someone sends a mail to this group then the mail gets successfully forwarded to all 5 members in the group. However, every now and then when a recipient sends to the group they get a bounce back message from us that the mail could not be delivered because one of the user's addresses was not found on the server. This could happen for any one of the 5 users in the group. The error message looks like: Message could not be delivered. Error was: The email address is not available on this system The following recipient(s) could not be reached: [SF:mydomain.com/my_username] What could be causing this and how do I fix it? Obviously the mailbox DOES exist as, under normal circumstances, when someone mails the group the mail gets delivered successfully and forwarded to all group members. All the mailboxes most definitely DO exist on the system. EDIT: I have done more investigation and I see an error in Windows Event Viewer: MailEnable Database Provider error: 0 FAILURE: (SQLDriverConnect), Module: MEIMAPS.exe; Error: [Microsoft][ODBC SQL Server Driver]Timeout expired This seems to be related to http://forum.mailenable.com/viewtopic.php?p=53157 and http://www.mailenable.com/kb/content/view.asp?ID=ME020535 but the setups in these links use MySQL as a database whereas we use SQL Server. Maybe this shines some new light on the problem?

  Read the article

• Why can't I boot in to Windows Recovery Environment to fix my HDD or salvage my data?

  - by Kevin

  I've been trying to get in to WindowsRE to salvage the files on my Sony Vaio laptop after it failed to load Vista (it finally, consistently displays "Error loading operating system" after months of such intermittent failures, usually rectified via restarts or utilizing Startup Repair or CHKDSK from WindowsRE) . The problem is, after successfully accessing it once after this failure (and many times before over the course of the laptop's life), I can no longer get it to load. During the last successful access (right after the failure), I ran startup repair, which itself failed and notified me that the boot sector was corrupt. I attempted to head in to Sony's proprietary recovery tools menu, which is accessible from WindowsRE when it is loaded from the recovery partition or recovery disk, however it hung. I have since been unable to access the recovery environment after restarting, using any of these methods: Access via the recovery partition (pressing F10 on boot) Access via recovery DVD (created using the same computer when it was healthy) Access via a Windows Vista installation DVD All three methods produce the same results: The computer acknowledges the boot attempt The computer successfully gets passed the "Windows is loading files" screen The computer successfully gets passed the Windows loading screen The computer then stalls at a black screen, while showing HDD activity (via indicator light). After a few minutes, the HDD activity ceases, and after a few more minutes, the over sized cursor that is utilized in WindowsRE appears on the black screen. The actual recovery environment, however, never appears, even after leaving the computer in such a state overnight. What is fustrating is that other bootable utilities, such as SeaTools for DOS and MemTest, boot up and run fine. In running perfectly normally, MemTest was able to produce a plethora of errors utilizing my RAM. I'm inclined to believe the RAM's faultiness may causing the WindowsRE booting to fail. Would this be a valid assumption? If I'm not mistaken, booting from external media utilizes the RAM, so such a reason is plausible, assuming my knowledge of bootloading is correct. Other than that, I can't figure out any reason why all the bootable utilities except WindowsRE run fine. Does anyone know what the problem is, or could be? Any solutions?

  Read the article

• Apache fails to start after WHM easyapache update

  - by Vigrond

  Tryin to get some light shed on this issue Running CentOS I upgraded Apache using easyapache to 2.2 All was well I then used WHM to update Mysql to 5.5 This succeeded but now Apache will not start. The error log was reporting things like [Sun Apr 15 00:44:57 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [notice] suEXEC mechanism enabled (wrapper: /usr/local/apache/bin/suexec) [Sun Apr 15 02:27:30 2012] [warn] pid file /usr/local/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [notice] Apache/2.2.22 (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 configured -- resuming normal operations [Sun Apr 15 02:27:30 2012] [alert] Child 4063 returned a Fatal error... Apache is exiting! So I tried to recompile using easyapache again, but easyapache just hangs I tried with base php settings - and it always gets stuck on "bf804000-bf819000 rw-p 7ffffffe9000 00:00 0 [stack]" At this point in cpanel the status says "create srm.conf and access.conf for mod_frontpage" I have tried things like rpm --rebuilddb yum clean all yum update with no luck. I'm kind of running out of ideas, and wondering if anyone could point me to the right direction.

  Read the article

• Microsoft Windows DHCP: Steering IPv4 clients into specific scopes based on MAC

  - by Easter Sunshine

  We have visitors on our campus who bring their own laptops and devices and use our wireless and wired networks. When we receive a copyright infringement notice (typically BitTorrenting), we are required to quarantine that MAC address so that it no longer has Internet access. No matter what website it tries to visit, it is sent to a web page explaining to the user that the device has been quarantined. We have thus far implemented this in ISC DHCP on Linux. We have multiple VLANs with one or more public-IP subnets and one RFC1918 quarantine subnet each. All clients are leased IPs in the public-IP subnet(s) unless you're in a list of known bad MACs. Then, you are sent to the quarantine subnet so that your traffic is unroutable on the Internet (you are isolated by subnet only, not by VLAN). We would like to move to Windows DHCP in light of the IPAM role but I cannot figure out how to replicate this in Windows DHCP 2012 (Assign DHCP IPs for specific MAC prefixes on Windows Server 2008 R2 suggests it was not possible in 2008 R2), even while using policies. So here's what I'd like: The administrator/help desk provides and maintains a list of MAC addresses that are to be quarantined. The DHCP server places those MACs into the quarantine subnet on the respective VLAN, no matter which VLAN the client is in. I don't think reservations would work: We currently have about 300 registered bad MACs and about 12 VLANs. I don't want to make 300 x 12 reservations nor have to add 12 reservations per new MAC address. Not to mention all of the quarantine subnets are /24s. We do not have NPS/NAC. You do not have to register your MAC address get network access. We use Cisco routers/switches. Thanks.

  Read the article

• Linksys wireless router will not hardware reset.

  - by Jack M.

  Hello, all. I'm unable to make my router perform a hardware reset, and I cannot understand why. All was working well, except that my iPhone could not connect to the wireless. I found that the router was only allowing AES encryption on WPA2 Personal mode, so I upgraded the firmware. I updated the firmware to Ver.1.06.1, and everything went screwy. The router is no longer showing up in the WiFi list (as Linksys, or its previous network name). Wiring into the router gives me an IP address from my ISP (24.121.121.XXX). Attempting to do a hardware reset, but the power light never starts flashing and the router does not seem to reboot. My machine wired in is still online with no interruption in WoW. Pulling the power cord to force a reset returns it to the same state. I even went so far as to pull up my previous IP address (from DynDNS) and try to connect to that, but it wont even ping. What I'm trying to find out is: Did the new firmware fry the thing, or is there some way to fix this? Thanks in advance for any help.

  Read the article

• Trouble with HP printer

  - by reyjavikvi

  I have a HP Photosmart C3180 (it's a printer/scanner). For some reason, it recently stopped working. The power light is blinking (I think all the other lights are one, but don't remember, I'm not there right now), and the only way to turn it off is to unplug it. It won't print anything, and when you put a page in the tray it sucks it in without printing anything on it and stops when the paper is on its way out (Again, I don't remember how we managed to get it out, sorry). This printer is hooked up to a computer running XP, but it doesn't work either when printing from the network. Weirdly, the scanner works fine. Do you have any ideas on what could be the problem? Could it be a driver problem? By the way, sorry if the question lacks a bit of detail. I don't know much about printers, and I don't have it here so I can't remember exactly all the details. If needed I can update the question tonight or tomorrow.

  Read the article

• What would cause my Windows machine to seize?

  - by Coltin

  I run Windows XP SP2 on a Desktop I built (I know that doesn't provide much, but I can't say "on a Dell X103938R" or something). It has 'seized' about 7 times in its year and a half life. Everything freezes. I can't move the mouse cursor and the keyboard seems unresponsive. I can turn the monitor on and off and it will hold the last image. The light for the mouse is responsive if I move it. The keyboard lights change when pressed (cap locks, etc). I've waited upto ten minutes for a change, nothing. I haven't connected any activity to the seizing. It's happened when all I was "running" were fullscreen programs (games), just checking email, or once when I was sitting at my desktop (I was reading a book and when I tried to use the mouse, nothing). I've never been able to figure it out. I have to hard reset, and then its fine. It doesn't file system check or anything (not sure if Windows does that). No error when I load up the computer, nothing. If I had uTorrent open, it will have to recheck the torrent files to make sure they weren't corrupted though. (It's not always open when it seizes either). I'm using an AMD Athlon 5400+ with a NVidia GeForce 8600 GT, if that helps. I'm using two hard drives, 500Gb Wester Digital with a 1Tb Hitachi.

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >