Search Results

Search found 3637 results on 146 pages for 'qt designer'.

Page 138/146 | < Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >

• Sql Server Compact 2005 on Visual Studio 2008

  - by Tim

  I'm working on a Windows Forms application that interacts with a Sql Compact database file created by SQL Server 2005. This application was originally developed in Visual Studio 2005 but was recently converted to a Visual Studio 2008 solution. In regards to Sql Compact, we made sure the references were all still set to the assemblies that handle the 2005 version of Sql Compact rather than Sql Compact 3.5. Having done this, the application still runs just as it should - it will still interact with the Compact database, perform synchronization operations, etc. However, I just discovered today that Visual Studio tools such as the DataSet Designer do not play well with a Sql Compact database file of an older version than 3.5. If I go to the New Connection... wizard, the only Sql Compact Data Source / Data Provider are for Sql Compact 3.5. I assume that Visual Studio 2008 just doesn't include the data provider for the older version of Sql Compact by default. Is there a way you can add the old version of Sql Compact to the list of "Data Sources" for the connection wizard? To see exactly what I'm referring to, click on the Tools menu of Visual Studio 2008 and click Connect to Database... In the window that comes up, click Change... next to the Data source setting. From this dialog there is no way I can select the earlier version of Sql Compact - only 3.5 is available. Maybe I need to add an assembly reference somewhere? Or copy some file(s) from my Visual Studio 2005 directory over to 2008? I would think there would have to be a way for Visual Studio 2008 to be able to interact with a Sql Compact database from Sql Server 2005. To provide one more bit of detail, I discovered this problem when I went to my DataSet, right-clicked and tried to add a TableAdapter. The first screen that comes up says, "Choose Your Data Connection". If I leave it set to the Sql Compact connection that we've always used, I now get the following error when clicking the Next button: Failed to open a connection to the database "The selected database was created with an earlier version of SQL Server Compact and needs to be upgraded to SQL Server Compact 3.5 before the connection can be opened or tested. Upgrade the database by creating a new data connection and completing the Add Connection dialog box." Check the connection and try again. The only problem here is that we still use Sql Server 2005, and if my understanding is correct, it does not produce subscription files that are compatible with Sql Compact 3.5. If I am wrong in this assumption, please correct me. Any help you can provide is greatly appreciated. Thank you.

  Read the article

• Design-time failure: WPF, Usercontrols and Namespaces

  - by Simon Woods

  Hi I have a very simple WPF project comprising a Window and Usercontrol. I'm very much in a learning phase. It works fine when I run it. However, I am unable to see the form in design time. The problem, I believe is something to do with namespaces, but I don't understand where. It may well be a simple error Main Window XML <Window xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:views="clr-namespace:UserLogin" x:Class="UserLogin.MainView" x:Name="MainViewWindow" mc:Ignorable="d" Title="Login" Height="141" Width="347" > <Grid> <views:LoginView /> </Grid> </Window> Main Window CodeBehind Imports Microsoft.VisualBasic Imports System Imports System.Windows Imports UserLogin Namespace UserLogin Partial Public Class MainView Inherits System.Windows.Window Public Sub New() InitializeComponent() End Sub End Class End Namespace Usercontrol XAML <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" x:Class="UserLogin.LoginView" x:Name="LoginViewControl" mc:Ignorable="d" d:DesignHeight="96" d:DesignWidth="298"> <Grid Height="96" Width="298"> <Button Command="{Binding OKCommand}" Height="21" Margin="0,0,90,16" Name="btnOK" VerticalAlignment="Bottom" HorizontalAlignment="Right" Width="76">OK</Button> <Button Command="{Binding CancelCommand}" Height="21" HorizontalAlignment="Right" Margin="0,0,9,16" Name="btnCancel" VerticalAlignment="Bottom" Width="75">Cancel</Button> <Label Height="23" HorizontalAlignment="Left" Margin="10,5,0,0" Name="Label1" VerticalAlignment="Top" Width="85">Name:</Label> <Label HorizontalAlignment="Left" Margin="10,32,0,0" Name="Label2" Width="85" Height="29" VerticalAlignment="Top">Password:</Label> <TextBox Margin="0,31,6,0" Name="txtPassword" Height="22" VerticalAlignment="Top" HorizontalAlignment="Right" Width="182" /> <ComboBox Height="22" Margin="110,6,6,0" Name="cboNames" VerticalAlignment="Top" /> </Grid> </UserControl> Usercontrol CodeBehind Imports Microsoft.VisualBasic Imports System Imports UserLogin Namespace UserLogin Partial Public Class LoginView Inherits System.Windows.Controls.UserControl Public Sub New() InitializeComponent() End Sub End Class End Namespace I think I'm missing something this namespace xmlns:views="clr-namespace:UserLogin" since intellisense doesn't give me the usercontrol declared within it in the XAML designer but rather reports the error "Unable to load the metadata for the assembly ... etc etc" Thx for any suggestions Simon

  Read the article

• WPF / Silverlight Binding when setting DataTemplate programically

  - by Daniel

  I have my little designer tool (my program). On the left side I have TreeView and on the right site I have Accordion. When I select a node I want to dynamically build Accordion Items based on Properties from DataContext of selected node. Selecting nodes works fine, and when I use this sample code for testing it works also. XAML code: <layoutToolkit:Accordion x:Name="accPanel" SelectionMode="ZeroOrMore" SelectionSequence="Simultaneous"> <layoutToolkit:AccordionItem Header="Controller Info"> <StackPanel Orientation="Horizontal" DataContext="{Binding}"> <TextBlock Text="Content:" /> <TextBlock Text="{Binding Path=Name}" /> </StackPanel> </layoutToolkit:AccordionItem> </layoutToolkit:Accordion> C# code: private void treeSceneNode_SelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e) { if (e.NewValue != e.OldValue) { if (e.NewValue is SceneNode) { accPanel.DataContext = e.NewValue; //e.NewValue is a class that contains Name property } } } But the problem occurs when I'm trying to achive this using DateTemplate and dynamically build AccordingItem, the Binding is not working: <layoutToolkit:Accordion x:Name="accPanel" SelectionMode="ZeroOrMore" SelectionSequence="Simultaneous" /> and DataTemplate in my ResourceDictionary <DataTemplate x:Key="dtSceneNodeContent"> <StackPanel Orientation="Horizontal" DataContext="{Binding}"> <TextBlock Text="Content:" /> <TextBlock Text="{Binding Path=Name}" /> </StackPanel> </DataTemplate> and C# code: private void treeSceneNode_SelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e) { if (e.NewValue != e.OldValue) { ResourceDictionary rd = new ResourceDictionary(); rd.Source = new Uri("/SilverGL.GUI;component/SilverGLDesignerResourceDictionary.xaml", UriKind.RelativeOrAbsolute); if (e.NewValue is SceneNode) { accPanel.DataContext = e.NewValue; AccordionItem accController = new AccordionItem(); accController.Header = "Controller Info"; accController.ContentTemplate = rd["dtSceneNodeContent"] as DataTemplate; accPanel.Items.Add(accController); } else { // Other type of node } } } I really need help with this issue. Thanks for any support.

  Read the article

• Crystal reports .net visual studio 2008 bundled edition

  - by DeveloperChris

  I have a serious issue with crystal reports. when run in my development environment or debugged on my local machine it works fine. but when the application is published to a windows server 2003 it has the dreaded "The report you requested requires further information" Message I have had no luck trying to get rid of this message Anybody know what I can try? DC Here is a bunch more info. I use a placeholder in the aspx page and then set the user/password and database in the codebehind I could not get it to work with a dataset and found that I had to assign odbc connection in the cr designer. and then in the code behind change the above details as required. This is done because the same report can get the data from 3 different databases (live development and training) protected override void Page_Load(object sender, EventArgs e) { base.Page_Load(sender, e); CrystalReportSource1.ReportDocument.Load(Server.MapPath(@"~/Reports/Report5asp.rpt")); CrystalReportViewer1.ReportSource = ConfigureCrystalReports(CrystalReportSource1.ReportDocument,CrystalReportViewer1); // parameters CrystalReportViewer1.ParameterFieldInfo.Clear(); AddParameter("DIid", _app.Data["DIid"], CrystalReportViewer1.ParameterFieldInfo); AddParameter("EEid", _app.Data["EEid"], CrystalReportViewer1.ParameterFieldInfo); AddParameter("CTid", _app.Data["CTid"], CrystalReportViewer1.ParameterFieldInfo); } public ReportDocument ConfigureCrystalReports(ReportDocument report, CrystalReportViewer viewer) { String _connectionString = _app.ConnectionString(); String dsn = _app.DSN(); SqlConnectionStringBuilder SConn = new SqlConnectionStringBuilder(_connectionString); TableLogOnInfos crtableLogoninfos = new TableLogOnInfos(); TableLogOnInfo crtableLogoninfo = new TableLogOnInfo(); ConnectionInfo crConnectionInfo = new ConnectionInfo(); crConnectionInfo.ServerName = dsn;// SConn.DataSource; crConnectionInfo.DatabaseName = SConn.InitialCatalog; crConnectionInfo.UserID = SConn.UserID; crConnectionInfo.Password = SConn.Password; crConnectionInfo.Type = ConnectionInfoType.SQL; crConnectionInfo.IntegratedSecurity = false; foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in report.Database.Tables) { crtableLogoninfo = CrTable.LogOnInfo; crtableLogoninfo.ConnectionInfo = crConnectionInfo; CrTable.ApplyLogOnInfo(crtableLogoninfo); } return report; } As stated this works fine on my XP machine used for development when deployed on winserver 2003 I get the error DC Some interesting additional information I moved the development to my home machine so I could work on the problem this weekend. So now I am developing debugging and testing on the same machine! In VS2008 I can edit and preview the reports with no problems If I fire up the debugger I can view the reports in the browser with no problems But if I publish the website to another folder on the same machine and fire up IIS and try to browse to a report I get the aforementioned error. All else works as expected. IIS runs under different permissions than VS2008 so perhaps its something to do with that, but I have tried lots of different permissions and cannot get it to run. DC

  Read the article

• IoC/DI in the face of winforms and other generated code

  - by Kaleb Pederson

  When using dependency injection (DI) and inversion of control (IoC) objects will typically have a constructor that accepts the set of dependencies required for the object to function properly. For example, if I have a form that requires a service to populate a combo box you might see something like this: // my files public interface IDataService { IList<MyData> GetData(); } public interface IComboDataService { IList<MyComboData> GetComboData(); } public partial class PopulatedForm : BaseForm { private IDataService service; public PopulatedForm(IDataService service) { //... InitializeComponent(); } } This works fine at the top level, I just use my IoC container to resolve the dependencies: var form = ioc.Resolve<PopulatedForm>(); But in the face of generated code, this gets harder. In winforms a second file composing the rest of the partial class is generated. This file references other components, such as custom controls, and uses no-args constructors to create such controls: // generated file: PopulatedForm.Designer.cs public partial class PopulatedForm { private void InitializeComponent() { this.customComboBox = new UserCreatedComboBox(); // customComboBox has an IComboDataService dependency } } Since this is generated code, I can't pass in the dependencies and there's no easy way to have my IoC container automatically inject all the dependencies. One solution is to pass in the dependencies of each child component to PopulatedForm even though it may not need them directly, such as with the IComboDataService required by the UserCreatedComboBox. I then have the responsibility to make sure that the dependencies are provided through various properties or setter methods. Then, my PopulatedForm constructor might look as follows: public PopulatedForm(IDataService service, IComboDataService comboDataService) { this.service = service; InitializeComponent(); this.customComboBox.ComboDataService = comboDataService; } Another possible solution is to have the no-args constructor to do the necessary resolution: public class UserCreatedComboBox { private IComboDataService comboDataService; public UserCreatedComboBox() { if (!DesignMode && IoC.Instance != null) { comboDataService = Ioc.Instance.Resolve<IComboDataService>(); } } } Neither solution is particularly good. What patterns and alternatives are available to more capably handle dependency-injection in the face of generated code? I'd love to see both general solutions, such as patterns, and ones specific to C#, Winforms, and Autofac.

  Read the article

• SELECT SQL statement problem when getting info from an accdb in VB.Net

  - by Shane Fagan

  Hi again all, im getting the error below for this SQL statement in VB.Net SQLString = "SELECT AllPropertyDetails.PropertyID, Street, Town, County, Acres, Quotas, ResidenceDetails, Status, HighestBid, AskingPrice FROM AllPropertyDetails " SQLString += "INNER JOIN Land ON AllPropertyDetails.PropertyID = Land.PropertyID " SQLString += "WHERE Deleted = False " If PriceRadioButton.Checked = True Then SQLString += "ORDER BY AskingPrice ASC" ElseIf AcresRadioButton.Checked = True Then SQLString += "ORDER BY Acres ASC" End If Any ideas why its not working? The fields in the DB and the table names seem ok but its not working :/ System.InvalidOperationException was unhandled Message="An error occurred creating the form. See Exception.InnerException for details. The error is: No value given for one or more required parameters." Source="AuctioneerProject" StackTrace: at AuctioneerProject.My.MyProject.MyForms.Create__Instance__[T](T Instance) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 190 at AuctioneerProject.My.MyProject.MyForms.get_LandReport() at AuctioneerProject.ReportsMenu.LandButton_Click(Object sender, EventArgs e) in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\ReportsMenu.vb:line 4 at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.Run(ApplicationContext context) at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun() at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel() at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine) at AuctioneerProject.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() InnerException: System.Data.OleDb.OleDbException ErrorCode=-2147217904 Message="No value given for one or more required parameters." Source="Microsoft Office Access Database Engine" StackTrace: at System.Data.OleDb.OleDbCommand.ExecuteCommandTextErrorHandling(OleDbHResult hr) at System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OleDb.OleDbCommand.ExecuteReader() at AuctioneerProject.LandReport.load_Land() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 37 at AuctioneerProject.LandReport.PriceRadioButton_CheckedChanged(Object sender, EventArgs e) in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 79 at System.Windows.Forms.RadioButton.OnCheckedChanged(EventArgs e) at System.Windows.Forms.RadioButton.set_Checked(Boolean value) at AuctioneerProject.LandReport.InitializeComponent() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.designer.vb:line 40 at AuctioneerProject.LandReport..ctor() in C:\Users\admin\Desktop\Auctioneers\AuctioneerProject\AuctioneerProject\LandReport.vb:line 5 InnerException:

  Read the article

• ASP.NET MVC - PartialView html not changing via jQuery html() call

  - by Bryan Roth

  When I change the selection in a DropDownList, a PartialView gets updated via a GET request. When updating the PartialView via the jQuery html() function, the html returned is correct but when it displayed in the browser it is not correct. For example, certain checkboxes within the PartialView should become enabled but they remain disabled even though the html returned says they should be. When I do a view source in the browser the html never gets updated. I'm a little perplexed. Thoughts? Search.aspx <%@ Page Title="" Language="VB" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Search </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <script type="text/javascript"> $(document).ready(function () { $("#Sections").change(function () { var section = $("#Sections").val(); var township = $("#Townships").val(); var range = $("#Ranges").val(); $.get("Search/Search?section=" + section + "&township=" + township + "&range=" + range, function (response) { $("#cornerDiv").html(response) }); }); }); </script> <h2>Search</h2> <%--The line below is a workaround for a VB / ASPX designer bug--%> <%=""%> <% Using Ajax.BeginForm("Search", New AjaxOptions With {.UpdateTargetId = "searchResults", .LoadingElementId = "loader"})%> Township <%= Html.DropDownList("Townships")%> Range <%= Html.DropDownList("Ranges")%> Section <%= Html.DropDownList("Sections")%> <div id="cornerDiv"> <% Html.RenderPartial("Corners")%> </div> <input type="submit" value="Search" /> <span id="loader">Searching...</span> <% End Using%> <div id="searchResults"></div> </asp:Content>

  Read the article

• Linq to SQL Repository ~theory~ - Generic but now uses Linq to Objects?

  - by Matt Tolliday

  The project I am currently working on used Linq to SQL as an ORM data access technology. Its an MVC3 Web app. The problem I faced was primarily due to the inability to mock (for testing) the DataContext which gets autogenerated by the DBML designer. So to solve this issue (after much reading) I refactored the repository system which was in place - single repository with seperate and duplicated access methods for each table which ended up with something like 300 methods only 10 of which were unique - into a single repository with generic methods taking the table and returning more generic types to the upper reaches of the application. My question revolves more around the design I've used to get thus far and the differences I'm noticing in the structure of the app. 1) Having refactored the code from the dark ages which used classic Linq to SQL queries: public Billing GetBilling(int id) { var result = ( from bil in _bicDc.Billings where bil.BillingId == id select bil).SingleOrDefault(); return (result); } it now looks like: public T GetRecordWhere<T>(Expression<Func<T, bool>> predicate) where T : class { T result; try { result = _dataContext.GetTable<T>().Where(predicate).SingleOrDefault(); } catch (Exception ex) { throw ex; } return result; } and is used by the controller with a query along the lines of: _repository.GetRecordWhere<Billing>(x => x.BillingId == 1); which is fine, and precisely what I wanted to achieve. ...however.... I'm also having to do the following to get precisely the result set i require in the controller class (the highest point of the app in essence)... viewModel.RecentRequests = _model.GetAllRecordsWhere<Billing>(x => x.BillingId == 1) .Where(x => x.BillingId == Convert.ToInt32(BillingType.Submitted)) .OrderByDescending(x => x.DateCreated). Take(5).ToList(); This - as far as my understanding is correct - is now using Linq to Objects rather than the Linq to SQL queries I was previously? Is this okay practise? It feels wrong to me but I dont know why. Probably because the logic of the queries is in the very highest tier of the app, rather than the lowest, but... I defer to you good people for advice. One of the issues I considered was bringing the entire table into memory but I understand that using the Iqeryable return type the where clause is taken to the database and evaluated there. Thus returning only the resultset i require... i may be wrong. And if you've made it this far, well done. Thank you, and if you have any advice it is very much appreciated!!

  Read the article

• What is a good dumbed-down, safe template system for PHP?

  - by Wilhelm

  (Summary: My users need to be able to edit the structure of their dynamically generated web pages without being able to do any damage.) Greetings, ladies and gentlemen. I am currently working on a service where customers from a specific demographic can create a specific type of web site and fill it with their own content. The system is written in PHP. Many of the users of this system wish to edit how their particular web site looks, or, more commonly, have a designer do it for them. Editing the CSS is fine and dandy, but sometimes that's not enough. Sometimes they want to shuffle the entire page structure around by editing the raw HTML of the dynamically created web pages. The templating system used by WordPress is, as far as I can see, perfect for my use. Except for one thing which is critically important. In addition to being able to edit how comments are displayed or where the menu goes, someone editing a template can have that template execute arbitrary PHP code. As the same codebase runs all these different sites, with all content in the same databse, allowing my users to run arbitrary code is clearly out of the question. So what I need, is a dumbed-down, idiot-proof templating system where my users can edit most of the page structure on their own, pulling in the dynamic sections wherever, without being able to even echo 1+1;. Observe the following psuedocode: <!DOCTYPE html> <title><!-- $title --></title> <!-- header() --> <!-- menu() --> <div>Some random custom crap added by the user.</div> <!-- page_content() --> That's the degree of power I'd like to grant my users. They don't need to do their own loops or calculations or anything. Just include my variables and functions and leave the rest to me. I'm sure I'm not the only person on the planet that needs something like this. Do you know of any ready-made templating systems I could use? Thanks in advance for your reply.

  Read the article

• .NET Application broken on one PC, unhandleable exception

  - by Bobby

  Hello people. I have a .NET 2.0 application with nothing fancy in it. It worked until yesterday on every PC I installed or copied it to, no matter if 2.0, 3.0, 3.5 or 3.5 SP1 was installed, no matter if it was Win2000, XP or even Win7 (in total 100+ machines). Yesterday I did my normal installation procedure and wanted to start it one time to check if everything is working...and it wasn't. The program crashed hard leaving me with the uninformative "Do you wanna report this error?" dialog. The problem is an exception in the Main(String[] args) routine of my application. The event viewer is showing the following entry: Event Type: ErrorEvent Source: .NET Runtime 2.0 Error Reporting Event Category: None Event ID: 5000 Date: 05/05/2010 Time: 16:09:09 User: N/A Computer: myClientPC Description: EventType clr20r3, P1 apomenu.exe, P2 1.4.90.53, P3 4bdedea4, P4 system.configuration, P5 2.0.0.0, P6 4889de74, P7 1a6, P8 136, P9 ioibmurhynrxkw0zxkyrvfn0boyyufow, P10 NIL. Well...great information. After a lot of searching I finally was able to get further information about this exception (by adding a handler for UnhandledExceptions directly in My.MyApplication.New(), Application.Designer.vb): System.Configuration.ConfigurationErrorsException Configuration system failed to initialize at System.Configuration.ClientConfigurationSystem.EnsureInit(String configKey) at System.Configuration.ClientConfigurationSystem.PrepareClientConfigSystem(String sectionName) at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName) at System.Configuration.ConfigurationManager.GetSection(String sectionName) at System.Configuration.PrivilegedConfigurationManager.GetSection(String sectionName) at System.Net.Configuration.SettingsSectionInternal.get_Section() at System.Net.Sockets.Socket.InitializeSockets() at System.Net.Sockets.Socket.get_SupportsIPv4() at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.get_HostName() at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.RegisterChannel(Boolean SecureChannel) at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine) at MyAppNameHere.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:Line 81. And at this point I'm stuck...I'm out of ideas. I'm not using any kind of configuration system from the framework (no reference to System.Configuration, and there never was a MyAppnameHere.exe.config generated or distributed, nor have I seen this error before). I also found a bug report at Microsoft (Google Cache) about this bug (in another context, though). But as it seems, they won't even look at it. Every help is greatly appreciated! Edit: I'm using Visual Studio 2008 Prof.. Crash happens in Release- and Debug-Build on the client machine. Debugging the application directly on this machine is out of question I fear, 300+ Miles and they only have two computers to work with.

  Read the article

• Giving event control back to xaml/callee to access check/uncheck

  - by dovholuk

  Hi All, I've scoured the Internet but my search-foo must not work if it's out there cause I just can't find the proper search terms to get me the answer I am looking for. So I turn to the experts here as a last resort to point me in the right direction. What I'm trying to do is create a composite control of a text box and a list box but I want to allow the control consumer to decide what to do when say the checkbox is checked/unchecked and I just can't figure it out... Maybe i'm going about it all wrong. What I've done thus far is to: create a custom control that extends ListBox expose a custom DP named "Text" (for the Text box but it's not the important part) craft the generic.xaml so that the list items have a default ItemTemplate/DataTemplate inside the DataTemplate I'm trying to set the "Checked" or "Unchecked" events expose 'wrapper' events as DPs in the custom control that would get 'set' via the template when instatiated As soon as I try something like the following (inside generic.xaml): <DataTemplate> <...> <CheckBox Checked="{TemplateBinding MyCheckedDP}"/> <...> </DataTemplate> I get runtime exceptions, the designer - vs2010 - pukes out a LONG list of errors that are all very similar and nothing I do can make it work. I went so far as to try using the VisualTreeHelper but no magic combination I could find would work nor would it allow me to traverse the tree because when the OnApplyTemplate method fires the listbox items don't exist yet and aren't in the tree. So hopefully this all makes sense but if not please let me know and I'll edit the post for clarifications. Thanks to all for any pointers or thoughts... Like I said maybe I'm heading about it in the wrong way from the start... EDIT (Request for xaml) generic.xaml datatemplate: <DataTemplate > <StackPanel Orientation="Horizontal" > <local:FilterCheckbox x:Name="chk"> <TextBlock Text="{Binding Path=Display}" /> </local:FilterCheckbox> </StackPanel> </DataTemplate> usercontrol.xaml (invocation of custom control) <local:MyControl FancyName="This is the fancy name" ItemChecked="DoThisWhenACheckboxIsChecked" <-- this is where the consumer "ties" to the checkbox events ItemsSource="{Binding Source={StaticResource someDataSource}}" />

  Read the article

• Web-Frameworks for Education Management Systems?

  - by Indebi

  So, I'm working on an idea and I'll go into a brief overview of that but my question is, What are some good web frameworks for this situation? I have some experience in the following languages: C# Python I have considerably more experience in C# than Python, however I am expecting to learn new things. My idea is this, a completely web-based community-oriented Education Management System that focuses on making students and teachers day-to-day lives easier. For students it will provide a centralized place for them to do homework, study for tests, and reinforce concepts learned previously in class. For teachers it will give them a centralized place to handle assignments, attendance, homework, tests, and all other major parts of classroom management. All of that, but in a community-oriented fashion. Everything a teacher does is shared and open to constructive criticism, allowing other teachers to use their assignments/tests and for students or other teachers to comment, rate and criticize their assignments. This encourages an environment of openness that will allow teacher's to focus on teaching and student's to focus on learning. And that community wouldn't be limited to one school or school-district, this system would be completely school-independent. Please note that I have no problem with hearing constructive criticism on this idea, however I would prefer if this post was more focused on my question. I have somewhat explored about the following options: Django ASP.NET Ruby on Rails Silverlight (1) I have Django installed and I played with it for a little bit, I really like how easy setting up databases are and how it handles the database completely for you. I don't really know how to use it very well and I don't quite understand the Model-View-Controller paradigm(?) for it yet but I haven't thought about it much. I also like the fact that it uses Python. (2) I don't really like Visual Studio for developing in ASP.NET, I hate the way the web-designer works and it just feels clunky and old. I like the server-side development part though. I don't like how expensive ASP.NET and overall Visual Studio is, even if I do get it for free for now using DreamSpark (3) I haven't been able to explore much with this, I could not get Rails (or maybe Ruby) properly installed. I first installed it within RadRails and that didn't work so I uninstalled RadRails and then installed the latest version of Ruby off the official Windows Installer and then installed Ruby on Rails through gem and even after all that it still didn't work, so I installed Netbeans and attempted to use it there but it still did not work (4) I like Silverlight in some extents, I've played with this one the most, it's very similar to WPF (which I've used the most) in a lot of ways but I don't like how database connectivity works, at least in comparison to Django. I also dislike how expensive everything with Microsoft is, even if I get it for free for now with DreamSpark. I would like to hear some suggestions from experienced web-developers as to what I should use and why, or at least what some good options are for my scenario Your help would be very appreciated

  Read the article

• Design time error - multiple controls with the same Id

  - by ilivewithian

  I'm using VS 2008, I have a very simple page that has a bunch of uniquely named controls. When I try to view it in design mode I get the following error: Error Rendering Control - Label12 An unhanded exception has occurred. Multiple controls with the same ID 'Label1' were found. FindControl requires that controls have unique IDs I've checked the HTML and the designer file and I can only see one control called Label1. What might be causing this? Also, here is the aspx markup I'm having trouble with? <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="CoachingAppearanceReport.aspx.vb" Inherits="AcademyPro.CoachingAppearanceReport" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <div id="appearanceDetail" class="Left CriteriaContainer"> <asp:Label ID="Label1" runat="server" Text="Appearance Type" AssociatedControlID="ddlAppearanceType" /> <asp:DropDownList ID="ddlAppearanceType" runat="server" CssClass="AppType" OnDataBound="ddlAppearanceType_DataBound" DataSourceID="odsAppearanceType" DataTextField="AppearanceType" DataValueField="AppearanceTypeCode"> </asp:DropDownList> <asp:RequiredFieldValidator ID="rfvAppearanceType" runat="server" ControlToValidate="ddlAppearanceType" InitialValue="" Text="*" ErrorMessage="The appearance type must be selected" /> <asp:Label ID="lblAppearanceType" runat="server" /> <br /> <div class="SubSettings"> <asp:Label ID="Label12" runat="server" Text="Subbed for" AssociatedControlID="ddlSubbedFor" /> <asp:DropDownList ID="ddlSubbedFor" runat="server" OnDataBound="ddlSubbedFor_DataBound" DataSourceID="odsPlayersInAgeGroup" DataTextField="PlayerName" DataValueField="PlayerID"> </asp:DropDownList> <asp:Label ID="lblSubbedFor" runat="server" /> <br /> <asp:Label ID="Label13" runat="server" Text="Mins" AssociatedControlID="txtSubMins" /> <asp:TextBox ID="txtSubMins" runat="server" MaxLength="3" CssClass="TinyWidth" /> <asp:Label ID="lblSubMins" runat="server" /> </div> </div> </ContentTemplate> </asp:UpdatePanel> </form> </body> </html>

  Read the article

• can we use both custom button and inbuilt button in datagridview

  - by Srikanth Mattihalli

  HI all, I am using Datagridview in asp.net. I have used custom buttons of up and down in the datagridview along with edit,delete and paging options. I am handling the up down buttons by raising events in rowcommand and the code is as below string command = e.CommandName; Response.Write(e.CommandArgument.ToString()); int index = Convert.ToInt32(e.CommandArgument.ToString()); int count = GridView1.Rows.Count; int keyValue = Convert.ToInt32(GridView1.Rows[index].Cells1.Text); string value = GridView1.Rows[index].Cells[4].Text; SqlConnection conn = new SqlConnection(SqlDataSource1.ConnectionString); SqlCommand cmd = new SqlCommand(); if (command == "up") { if (index > 0) { index = index - 1; int keyValue1 = Convert.ToInt32(GridView1.Rows[index].Cells[1].Text); string value1 = GridView1.Rows[index].Cells[4].Text; cmd.Connection = conn; cmd.CommandText = "UPDATE [category] SET [order_id] = '" + value + "' WHERE [category_id]=" + keyValue1 + ";UPDATE [category] SET [order_id] = '" + value1 + "' WHERE [category_id]=" + keyValue + ";"; conn.Open(); cmd.ExecuteNonQuery(); conn.Close(); } } else if (command == "down") { if (index < count - 1) { index = index + 1; int keyValue1 = Convert.ToInt32(GridView1.Rows[index].Cells[1].Text); string value1 = GridView1.Rows[index].Cells[4].Text; cmd.Connection = conn; cmd.CommandText = "UPDATE [category] SET [order_id] = '" + value + "' WHERE [category_id]=" + keyValue1 + ";UPDATE [category] SET [order_id] = '" + value1 + "' WHERE [category_id]=" + keyValue + ";"; conn.Open(); cmd.ExecuteNonQuery(); conn.Close(); } } Response.Redirect("Default.aspx"); Designer file " DeleteCommand="DELETE FROM [category] WHERE [category_id] = @category_id" InsertCommand="INSERT INTO [category] ([categoryname], [navigation_url], [order_id]) VALUES (@categoryname, @navigation_url, @order_id)" SelectCommand="SELECT * FROM [category] order by order_id" UpdateCommand="UPDATE [category] SET [categoryname] = @categoryname, [navigation_url] = @navigation_url, [order_id] = @order_id WHERE [category_id] = @category_id" After this my edit,delete and paging is not working bcoz of event conflicts. Can anyone plz help me on this, so that i will be able to use both custom buttons(up and down) and edit,delete and paging features.

  Read the article

• Under what circumstances would a LINQ-to-SQL Entity "lose" a changed field?

  - by John Rudy

  I'm going nuts over what should be a very simple situation. In an ASP.NET MVC 2 app (not that I think this matters), I have an edit action which takes a very small entity and makes a few changes. The key portion (outside of error handling/security) looks like this: Todo t = Repository.GetTodoByID(todoID); UpdateModel(t); Repository.Save(); Todo is the very simple, small entity with the following fields: ID (primary key), FolderID (foreign key), PercentComplete, TodoText, IsDeleted and SaleEffortID (foreign key). Each of these obviously corresponds to a field in the database. When UpdateModel(t) is called, t does get correctly updated for all fields which have changed. When Repository.Save() is called, by the time the SQL is written out, FolderID reverts back to its original value. The complete code to Repository.Save(): public void Save() { myDataContext.SubmitChanges(); } myDataContext is an instance of the DataContext class created by the LINQ-to-SQL designer. Nothing custom has been done to this aside from adding some common interfaces to some of the entities. I've validated that the FolderID is getting lost before the call to Repository.Save() by logging out the generated SQL: UPDATE [Todo].[TD_TODO] SET [TD_PercentComplete] = @p4, [TD_TodoText] = @p5, [TD_IsDeleted] = @p6 WHERE ([TD_ID] = @p0) AND ([TD_TDF_ID] = @p1) AND /* Folder ID */ ([TD_PercentComplete] = @p2) AND ([TD_TodoText] = @p3) AND (NOT ([TD_IsDeleted] = 1)) AND ([TD_SE_ID] IS NULL) /* SaleEffort ID */ -- @p0: Input BigInt (Size = -1; Prec = 0; Scale = 0) [5] -- @p1: Input BigInt (Size = -1; Prec = 0; Scale = 0) [1] /* this SHOULD be 4 and in the update list */ -- @p2: Input TinyInt (Size = -1; Prec = 0; Scale = 0) [90] -- @p3: Input NVarChar (Size = 4000; Prec = 0; Scale = 0) [changing text] -- @p4: Input TinyInt (Size = -1; Prec = 0; Scale = 0) [0] -- @p5: Input NVarChar (Size = 4000; Prec = 0; Scale = 0) [changing text foo] -- @p6: Input Bit (Size = -1; Prec = 0; Scale = 0) [True] -- Context: SqlProvider(Sql2005) Model: AttributedMetaModel Build: 4.0.30319.1 So somewhere between UpdateModel(t) (where I've validated in the debugger that FolderID updated) and the output of this SQL, the FolderID reverts. The other fields all save. (Well, OK, I haven't validated SaleEffortID yet, because that subsystem isn't really ready yet, but everything else saves.) I've exhausted my own means of research on this: Does anyone know of conditions which would cause a partial entity reset (EG, something to do with long foreign keys?), and/or how to work around this?

  Read the article

• LINQ Query Returning Multiple Copies Of First Result

  - by Mike G

  I'm trying to figure out why a simple query in LINQ is returning odd results. I have a view defined in the database. It basically brings together several other tables and does some data munging. It really isn't anything special except for the fact that it deals with a large data set and can be a bit slow. I want to query this view based on a long. Two sample queries below show different queries to this view. var la = Runtime.OmsEntityContext.Positions.Where(p => p.AccountNumber == 12345678).ToList(); var deDa = Runtime.OmsEntityContext.Positions.Where(p => p.AccountNumber == 12345678).Select(p => new { p.AccountNumber, p.SecurityNumber, p.CUSIP }).ToList(); The first one should hand back a List. The second one will be a list of anonymous objects. When I do these queries in entities framework the first one will hand me back a list of results where they're all exactly the same. The second query will hand me back data where the account number is the one that I queried and the other values differ. This seems to do this on a per account number basis, ie if I were to query for one account number or another all the Position objects for one account would have the same value (the first one in the list of Positions for that account) and the second account would have a set of Position objects that all had the same value (again, the first one in it's list of Position objects). I can write SQL that is in effect the same as either of the two EF queries. They both come back with results (say four) that show the correct data, one account number with different securities numbers. Why does this happen??? Is there something that I could be doing wrong so that if I had four results for the first query above that the first record's data also appears in the 2-4th's objects??? I cannot fathom what would/could be causing this. I've searched Google for all kinds of keywords and haven't seen anyone with this issue. We partial class out the Positions class for added functionality (smart object) and some smart properties. There are even some constructors that provide some view model type support. None of this is invoked in the request (I'm 99% sure of this). However, we do this same pattern all over the app. The only thing I can think of is that the mapping in the EDMX is screwy. Is there a way that this would happen if the "primary keys" in the EDMX were not in fact unique given the way the view is constructed? I'm thinking that the dev who imported this model into the EDMX let the designer auto select what would be unique. Any help would give a haggered dev some hope!

  Read the article

• RenderTargetBitmap + Resource'd VisualBrush = incomplete image

  - by Will

  I've found a new twist on the "Visual to RenderTargetBitmap" question! I'm rendering previews of WPF stuff for a designer. That means I need to take a WPF visual and render it to a bitmap without that visual ever being displayed. Got a nice little method to do it like to see it here it goes private static BitmapSource CreateBitmapSource(FrameworkElement visual) { Border b = new Border { Width = visual.Width, Height = visual.Height }; b.BorderBrush = Brushes.Black; b.BorderThickness = new Thickness(1); b.Background = Brushes.White; b.Child = visual; b.Measure(new Size(b.Width, b.Height)); b.Arrange(new Rect(b.DesiredSize)); RenderTargetBitmap rtb = new RenderTargetBitmap( (int)b.ActualWidth, (int)b.ActualHeight, 96, 96, PixelFormats.Pbgra32); // intermediate step here to ensure any VisualBrushes are rendered properly DrawingVisual dv = new DrawingVisual(); using (var dc = dv.RenderOpen()) { var vb = new VisualBrush(b); dc.DrawRectangle(vb, null, new Rect(new Point(), b.DesiredSize)); } rtb.Render(dv); return rtb; } Works fine, except for one leeetle thing... if my FrameworkElement has a VisualBrush, that brush doesn't end up in the final rendered bitmap. Something like this: <UserControl.Resources> <VisualBrush x:Key="LOLgo"> <VisualBrush.Visual> <!-- blah blah --> <Grid Background="{StaticResource LOLgo}"> <!-- yadda yadda --> Everything else renders to the bitmap, but that VisualBrush just won't show. The obvious google solutions have been attempted and have failed. Even the ones that specifically mention VisualBrushes missing from RTB'd bitmaps. I have a sneaky suspicion this might be caused by the fact that its a Resource, and that lazy resource isn't being inlined. So a possible fix would be to, somehow(???), force resolution of all static resource references before rendering. But I have absolutely no idea how to do that. Anybody have a fix for this?

  Read the article

• PHP email form multiple select

  - by Justin Goodman

  I'm trying to set up a simple PHP contact form for a website and I need some help modifying the PHP to list multiple items from a select menu and would appreciate the help. I'm a graphic designer, not a developer, so a lot of this is way over my head. This is the problem area here: <label for="Events[]">Which Event(s) Will You Be Attending?</label> <div class="input-bg"> <select name="Events[]" size="6" multiple="MULTIPLE" class="required" id="Events[]"> <option value="Wednesday">Portfolio Show June 16</option> <option value="Thursday">Portfolio Show June 17</option> <option value="Saturday">Graduation Ceremony</option> <option value="Saturday Eve">Graduation Party</option> <option value="Not Sure">Not Sure</option> <option value="Not Coming">Not Coming</option> </select> </div> And here's the PHP: <?php // CHANGE THE VARIABLES BELOW $EmailFrom = "[email protected]"; $EmailTo = "[email protected]"; $Subject = "Graduation RSVP"; $Name = Trim(stripslashes($_POST['Name'])); $Email = Trim(stripslashes($_POST['Email'])); $Guests = Trim(stripslashes($_POST['Guests'])); $Events = Trim(stripslashes($_POST['Events'])); // prepare email body text $Body = ""; $Body .= "Name: "; $Body .= $Name; $Body .= "\n"; $Body .= "Email: "; $Body .= $Email; $Body .= "\n"; $Body .= "Guests: "; $Body .= $Guests; $Body .= "\n"; $Body .= "Events: "; $Body .= $Events; $Body .= "\n"; // send email $success = mail($EmailTo, $Subject, $Body, "From: <$EmailFrom>"); // redirect to success page // CHANGE THE URL BELOW TO YOUR "THANK YOU" PAGE if ($success){ print "<meta http-equiv=\"refresh\" content=\"0;URL=http://justgooddesign.net/graduation\">"; } else{ print "<meta http-equiv=\"refresh\" content=\"0;URL=http://justgooddesign.net/graduation/error.html\">"; } ?> Any help really is appreciated!

  Read the article

• Classes to Entities; Like-class inheritence problems

  - by Stacey

  Beyond work, some friends and I are trying to build a game of sorts; The way we structure some of it works pretty well for a normal object oriented approach, but as most developers will attest this does not always translate itself well into a database persistent approach. This is not the absolute layout of what we have, it is just a sample model given for sake of representation. The whole project is being done in C# 4.0, and we have every intention of using Entity Framework 4.0 (unless Fluent nHibernate can really offer us something we outright cannot do in EF). One of the problems we keep running across is inheriting things in database models. Using the Entity Framework designer, I can draw the same code I have below; but I'm sure it is pretty obvious that it doesn't work like it is expected to. To clarify a little bit; 'Items' have bonuses, which can be of anything. Therefore, every part of the game must derive from something similar so that no matter what is 'changed' it is all at a basic enough level to be hooked into. Sounds fairly simple and straightforward, right? So then, we inherit everything that pertains to the game from 'Unit'. Weights, Measures, Random (think like dice, maybe?), and there will be other such entities. Some of them are similar, but in code they will each react differently. We're having a really big problem with abstracting this kind of thing into a database model. Without 'Enum' support, it is proving difficult to translate into multiple tables that still share a common listing. One solution we've depicted is to use a 'key ring' type approach, where everything that attaches to a character is stored on a 'Ring' with a 'Key', where each Key has a Value that represents a type. This works functionally but we've discovered it becomes very sluggish and performs poorly. We also dislike this approach because it begins to feel as if everything is 'dumped' into one class; which makes management and logical structure difficult to adhere to. I was hoping someone else might have some ideas on what I could do with this problem. It's really driving me up the wall; To summarize; the goal is to build a type (Unit) that can be used as a base type (Table per Type) for generic reference across a relatively global scope, without having to dump everything into a single collection. I can use an Interface to determine actual behavior so that isn't too big of an issue. This is 'roughly' the same idea expressed in the Entity Framework.

  Read the article

• Deriving from a component and implementing IDisposable properly

  - by PaulH

  I have a Visual Studio 2008 C# .NET 2.0 CF project with an abstract class derived from Component. From that class, I derive several concrete classes (as in my example below). But, when I go to exit my Form, though the Form's Dispose() member is called and components.Dispose() is called, my components are never disposed. Can anybody suggest how I can fix this design? public abstract class SomeDisposableComponentBase : Component { private System.ComponentModel.IContainer components; protected SomeDisposableComponentBase() { Initializecomponent(); } protected SomeDisposableComponentBase(IContainer container) { container.Add(this); Initializecomponent(); } private void InitializeComponent() { components = new System.ComponentModel.Container(); } protected abstract void Foo(); #region IDisposable Members bool disposed_; /// Warning 60 CA1063 : Microsoft.Design : Ensure that 'SomeDisposableComponentBase.Dispose()' is declared as public and sealed.* public void Dispose() { // never called Dispose(true); GC.SuppressFinalize(this); } protected virtual void Dispose(bool disposing) { // never called if (!disposed_) { if (disposing && (components != null)) { components.Dispose(); } disposed_ = true; } base.Dispose(disposing); } #endregion } public SomeDisposableComponent : SomeDisposableComponentBase { public SomeDisposableComponent() : base() { } public SomeDisposableComponent(IContainer container) : base(container) { } protected override void Foo() { // Do something... } protected override void Dispose(bool disposing) { // never called base.Dispose(disposing); } } public partial class my_form : Form { private SomeDisposableComponentBase d_; public my_form() { InitializeComponent(); if (null == components) components = new System.ComponentModel.Container(); d_ = new SomeDisposableComponent(components); } /// exit button clicked private void Exit_Click(object sender, EventArgs e) { this.Close(); } /// from the my_form.designer.cs protected override void Dispose(bool disposing) { if (disposing && (components != null)) { // this function is executed as expected when the form is closed components.Dispose(); } base.Dispose(disposing); } } *I note that FX-Cop is giving me a hint here. But, if I try to declare that function as sealed, I get the error: error CS0238: 'SomeDisposableComponentBase.Dispose()' cannot be sealed because it is not an override Declaring that function an override leads to: 'SomeDisposableComponentBase.Dispose()': cannot override inherited member 'System.ComponentModel.Component.Dispose()' because it is not marked virtual, abstract, or override Thanks, PaulH

  Read the article

• Parsing secure entries XML file with jquery

  - by user573131

  Apologies if this is elementary. I'm primarily a front end designer/dev. I have webform through a form service called wufoo. Wufoo generates a lovely XML (or json) file that can be grabed and parsed. I'm trying to grab the entries xml feed that is associated with the form and parse it via jquery to show who has entered. Im using the following code (which works with a local xml file). http://bostonwebsitemakeover.com/2/test <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.js"></script> <script> $(document).ready(function () { $.ajax({ type: "GET", url: "people.xml", dataType: "xml", success: xmlParser }); }); function xmlParser(xml) { $('#load').fadeOut(); $(xml).find("Entry").each(function () { $(".main").append('<div class="entry">' + $(this).find("Field1").text() + ' ' + $(this).find("Field2").text() + ' http://twitter.com/' + $(this).find("Field17").text() + '</div>'); $(".entry").fadeIn(1000); }); } </script> My XML file contains the following: <?xml version="1.0"?> <Entries> <Entry> <EntryId>1</EntryId> <Field1>Meaghan</Field1> <Field2>Severson</Field2> <Field17/> </Entry> <Entry> <EntryId>2</EntryId> <Field1>Michael</Field1> <Field2>Flint</Field2> <Field17>michaelflint</Field17> </Entry> <Entry> <EntryId>3</EntryId> <Field1>Niki</Field1> <Field2>Brown</Field2> <Field17>nikibrown</Field17> </Entry> <Entry> <EntryId>4</EntryId> <Field1>Niki</Field1> <Field2>Brown</Field2> <Field17>nikibrown</Field17> </Entry> </Entries> I'm wondering how I would do this with the xml file hosted on the wufoo (which is https) So I guess Im asking how do I authenticate the feed via jquery? Or do i need to do this via json? Could someone explain how?

  Read the article

• WPF Binding when setting DataTemplate Programically

  - by Daniel

  Hello, I have my little designer tool (my program). On the left side I have TreeView and on the right site I have Accordion. When I select a node I want to dynamically build Accordion Items based on Properties from DataContext of selected node. Selecting nodes works fine, and when I use this sample code for testing it works also. XAML code: <layoutToolkit:Accordion x:Name="accPanel" SelectionMode="ZeroOrMore" SelectionSequence="Simultaneous"> <layoutToolkit:AccordionItem Header="Controller Info"> <StackPanel Orientation="Horizontal" DataContext="{Binding}"> <TextBlock Text="Content:" /> <TextBlock Text="{Binding Path=Name}" /> </StackPanel> </layoutToolkit:AccordionItem> </layoutToolkit:Accordion> C# code: private void treeSceneNode_SelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e) { if (e.NewValue != e.OldValue) { if (e.NewValue is SceneNode) { accPanel.DataContext = e.NewValue; //e.NewValue is a class that contains Name property } } } But the problem occurs when I'm trying to achive this using DateTemplate and dynamically build AccordingItem, the Binding is not working: <layoutToolkit:Accordion x:Name="accPanel" SelectionMode="ZeroOrMore" SelectionSequence="Simultaneous"> </layoutToolkit:Accordion> and DateTemplate in my ResourceDictionary <DataTemplate x:Key="dtSceneNodeContent"> <StackPanel Orientation="Horizontal" DataContext="{Binding}"> <TextBlock Text="Content:" /> <TextBlock Text="{Binding Path=Name}" /> </StackPanel> </DataTemplate> and C# code: private void treeSceneNode_SelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e) { if (e.NewValue != e.OldValue) { ResourceDictionary rd = new ResourceDictionary(); rd.Source = new Uri("/SilverGL.GUI;component/SilverGLDesignerResourceDictionary.xaml", UriKind.RelativeOrAbsolute); if (e.NewValue is SceneNode) { accPanel.DataContext = e.NewValue; AccordionItem accController = new AccordionItem(); accController.Header = "Controller Info"; accController.ContentTemplate = rd["dtSceneNodeContent"] as DataTemplate; accPanel.Items.Add(accController); } else { // Other type of node } } } I really need help with this issue. Thanks for any support. Daniel

  Read the article

• Need a fast programming language that can drive two printers

  - by Pete

  I have a rather unusual application that isn't working the way I need, and I hope someone here will have some suggestions or at least a direction to investigate. We have a museum exhibit that has a computer at the entrance driving two small receipt printers. There are two buttons on a console, wired to the left and right buttons of a disemboweled mouse. The two printers and associated buttons are for girls and boys, each button does a random selection from a database of names and prints a small ticket on the appropriate printer with a graphic image, a few words about the exhibit and the randomly chosen name. Conceptually all is well, but it hangs quite often. I got the project at the last minute, because the original designer got bogged down and couldn't deliver, so the exhibit's author asked me the day before opening, whether I could write something that would work. I did it in Word, since I am an experienced VBA programmer. Several other avenues I attempted first all lead to dead ends - one couldn't do graphics, another couldn't handle two printers, yet another couldn't change fonts and so on. The problem is that it simply isn't fast enough - Word can only drive one printer at a time and changing the active printer takes a long time. Not by office standards, where a second or two of delay before a printer starts working on your document is not an issue, but here I need more or less instant response. If kids press a button and nothing happens, they press it over and over until something does happen, resulting in maybe half a dozen commands being sent before the printer starts reacting. Sometimes it jams the program completely, since boys and girls will be pressing the two buttons simultaneously and Word locks up, and even when it doesn't jam, the printers then spit out a stream of tickets, making a mess. The kids start squabbling over which ticket is whose, pulling them out of the printers, snarling the paper tape, jamming the printer and generally making a mess of the whole affair, often necessitating the exhibit caretakers having to restart the computer and clear torn bits of paper out the printers. What I need is some sort of fast programming language that can drive two printers *-simultaneously-*, not the MSOffice claptrap of having to switch the active printer, that can react to both left and right mouse button click events, can print a small graphic image and can print in different font sizes and styles and. I don't need many, but it's not all in one typeface. Can anyone suggest what I might use for this? I don't even know if it's possible at all under Windows, whether the "single active printer" garbage is an Office artifact, or a Windows restriction. My little Commodore-64 twenty-five years ago had two printers attached to it and drove both simultaneously with no difficulties - it doesn't seem to me it should be such an impossible requirement today.

  Read the article

• ASP.NET MVC 2: Linq to SQL entity w/ ForeignKey relationship and Default ModelBinder strangeness

  - by Simon

  Once again I'm having trouble with Linq to Sql and the MVC Model Binder. I have Linq to Sql generated classes, to illustrate them they look similar to this: public class Client { public int ClientID { get; set; } public string Name { get; set; } } public class Site { public int SiteID { get; set; } public string Name { get; set; } } public class User { public int UserID { get; set; } public string Name { get; set; } public int? ClientID { get; set; } public EntityRef<Client> Client { get; set; } public int? SiteID { get; set; } public EntityRef<Site> Site { get; set; } } The 'User' has a relationship with the 'Client' and 'Site . The User class has nullable ClientIDs and SiteIDs because the admin users are not bound to a Client or Site. Now I have a view where a user can edit a 'User' object, the view has fields for all the 'User' properties. When the form is submitted, the appropiate 'Save' action is called in my UserController: public ActionResult Save(User user, FormCollection form) { //form['SiteID'] == 1 //user.SiteID == 1 //form['ClientID'] == 1 //user.ClientID == null } The problem here is that the ClientID is never set, it is always null, even though the value is in the FormCollection. To figure out whats going wrong I set breakpoints for the ClientID and SiteID getters and setters in the Linq to Sql designer generated classes. I noticed the following: SiteID is being set, then ClientID is being set, but then the Client EntityRef property is being set with a null value which in turn is setting the ClientID to null too! I don't know why and what is trying to set the Client property, because the Site property setter is never beeing called, only the Client setter is being called. Manually setting the ClientID from the FormCollection like this: user.ClientID = int.Parse(form["ClientID"].ToString()); throws a 'ForeignKeyReferenceAlreadyHasValueException', because it was already set to null before. The only workaround I have found is to extend the generated partial User class with a custom method: Client = default(EntityRef<Client>) but this is not a satisfying solution. I don't think it should work like this? Please enlighten me someone. So far Linq to Sql is driving me crazy! Best regards

  Read the article

• Helping linqtosql datacontext use implicit conversion between varchar column in the database and tab

  - by user213256

  I am creating an mssql database table, "Orders", that will contain a varchar(50) field, "Value" containing a string that represents a slightly complex data type, "OrderValue". I am using a linqtosql datacontext class, which automatically types the "Value" column as a string. I gave the "OrderValue" class implicit conversion operators to and from a string, so I can easily use implicit conversion with the linqtosql classes like this: // get an order from the orders table MyDataContext db = new MyDataContext(); Order order = db.Orders(o => o.id == 1); // use implicit converstion to turn the string representation of the order // value into the complex data type. OrderValue value = order.Value; // adjust one of the fields in the complex data type value.Shipping += 10; // use implicit conversion to store the string representation of the complex // data type back in the linqtosql order object order.Value = value; // save changes db.SubmitChanges(); However, I would really like to be able to tell the linqtosql class to type this field as "OrderValue" rather than as "string". Then I would be able to avoid complex code and re-write the above as: // get an order from the orders table MyDataContext db = new MyDataContext(); Order order = db.Orders(o => o.id == 1); // The Value field is already typed as the "OrderValue" type rather than as string. // When a string value was read from the database table, it was implicity converted // to "OrderValue" type. order.Value.Shipping += 10; // save changes db.SubmitChanges(); In order to achieve this desired goal, I looked at the datacontext designer and selected the "Value" field of the "Order" table. Then, in properties, I changed "Type" to "global::MyApplication.OrderValue". The "Server Data Type" property was left as "VarChar(50) NOT NULL" The project built without errors. However, when reading from the database table, I was presented with the following error message: Could not convert from type 'System.String' to type 'MyApplication.OrderValue'. at System.Data.Linq.DBConvert.ChangeType(Object value, Type type) at Read_Order(ObjectMaterializer1 ) at System.Data.Linq.SqlClient.ObjectReaderCompiler.ObjectReader2.MoveNext() at System.Linq.Buffer1..ctor(IEnumerable1 source) at System.Linq.Enumerable.ToArray[TSource](IEnumerable`1 source) at Example.OrdersProvider.GetOrders() at ... etc From the stack trace, I believe this error is happening while reading the data from the table. When presented with converting a string to my custom data type, even though the implicit conversion operators are present, the DBConvert class gets confused and throws an error. Is there anything I can do to help it not get confused and do the implicit conversion? Thanks in advance, and apologies if I have posted in the wrong forum. cheers / Ben

  Read the article

< Previous Page | 134 135 136 137 138 139 140 141 142 143 144 145  | Next Page >