Search Results

Search found 8706 results on 349 pages for 'dual monitor'.

Page 139/349 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

  • Distributed Server Monitoring Solution

    - by MaterialEdge
    I belong to an independent IT firm that manages and maintains about 50 business clients networks, ranging from small 5 system networks to 200+ systems. Because we are unable to directly monitor each server at these locations (distributed over a very large area) on a regular basis I am looking for a method to monitor and alert us to any problems that may arise so that we can respond quickly with, hopefully, preventative measures. I'm not sure what solutions are available for this type of situation, but something that utilizes a central server at our business with all client servers sending alerts or logs to it for daily monitoring might work best. All these servers are running a Windows Server OS. In your opinion, what would be the best course of action to accomplish this?

    Read the article

  • What are the best possible ways to benchmark RAM (no-ECC) under linux / arm?

    - by moul
    I want to test integrity and global performances of no-ECC memory chips on a custom board Are there some tools that run under linux so I can monitor system and global temperature in the same time ? Are there some no-ECC specific tests to do in general ? EDIT 1: I already know how to monitor temperature (I use a special platform feature /sys/devices/platform/......../temp1_input). For now : wazoox : it works but I've to code my own tests Jason Huntley : ramspeed : does not work on arm stream benchmark : it works and is very fast, so I'll look if it's accurate and complete memtest : I'll try later, since it does not run directly from linux stress for fedora : I'll try later too, it's too problematic for me to install fedora now I found this distribution : http://www.stresslinux.org/sl/ I'll continue to check tools that run directly under linux without too big dependencies, after I'll maybe give a try to solutions like stresslinux, memtest, stress for fedora. Thanks for you answers, I'll continue to investigate

    Read the article

  • Using PCIe and onboard together

    - by dave
    I'm currently using my PCI Express card to run 2 monitors and my onboard to run another. It works fine despite people saying it won't. I use a gadget to monitor my PCI card but would also like to monitor my onboard GPU as well. I play a game called Eve Online and when I'm running my accts I can only get 20 fps. Before, when I was using just my PCI card, I was getting 60+. To solve this, I set the display options to interval immediate, it was set to one before. My computer handles it no problem at all, but I was always told this was immpossible. I was hoping someone could explain how and why this is working. Thanks! My setup is: i7 2600k 16 GB RAM XFX HD6970 2GB

    Read the article

  • monitoring load on AWS EC2

    - by hortitude
    I'm interesting in monitoring our EC2 instances to ensure we scale up when necessary. Right now we are monitoring idle CPU time as our metric. We aren't measuring disk IO as we are not a very disk intensive application. When running on our own hardware in a datacenter I also usually monitor "load" from the top command. My question is: Does it make sense to monitor "load" on a shared env such as EC2? If so, how do you interpret the results?

    Read the article

  • 3 screens on W500 + ATI V5700 + docking station

    - by rafek
    I've got Lenovo W500 with D-SUB and DVI ports. Most of the time I work with a docking station which has D-SUB and DVI ports, as well. I used to have laptop + 22" monitor (DVI) configuration. Now I've got laptop + 22" (DVI) + 19" (D-SUB). I was trying to configure everythin but with no success. I've got ATI V5700 in my laptop. And my ATI CCC allows me to only have one external monitor attached at the time. :( Is there any workaround to this situation? I'd like to have the configuration I've just descripted: laptop + 22" (DVI) + 19" (D-SUB).

    Read the article

  • Downloads speed starts ok but after a few seconds they go down to 10kbps?

    - by peterg
    Since yesterday any file I try to download from any host start downloading ok (at 1mbps) but after a few seconds the speed start to decrease down to 10kbps. I use a mobile modem (huawei) and I connect to a wcdma network. What could be happening? I use kaspersky, and I checked the Network Monitor and I don't see any weird process using bandwidth. What other tests can I run? Recommend me some app to monitor the traffic to see if I have some malware or see where my bandwidth goes.

    Read the article

  • Viewsonic VG2427wm detected max resolution too low

    - by Hassan
    So I have a Viewsonic VG2427wm, which supports max resolution of 1920x1080 and I had it working at this resolution from both windows and linux PCs. Now, I need to connect it to my Dell XPS17 (L702x), which has only DP mini and HDMI, so I'm trying to connect this monitor via HDMI-to-DVI adapter (doesn't work at all) and via DP-mini-to-DVI adapter. The later works, but is limiting my max resolution to 1680x1050. Using same two adapters to connect my dell monitor works fine, so I don't suspect any of the adapters to be faulty. The driver is the latest viewsonic driver (although it's been last updated 3 years back). Any ideas, how I can force it to display it's correct native resolution?

    Read the article

  • Javascript and VERY LONG string

    - by StealthRT
    Hey all, i am having problems with the below code: function showTableData() { var tableArray; var x = 0; var theHTML; for (i = 0; i < 7032; i++) { if (x = 0) { theHTML = '<tr>' + '<th scope="row" class="spec">' + partNum[i] + '</th>' + '<td>' + Msrp[i] + '</td>' + '<td>' + blah[i] + '</td>' + '<td>' + blahs[i] + '</td>' + '</tr>' + theHTML; x++; }else{ theHTML = '<tr>' + '<th scope="row" class="specalt">' + partNum[i] + '</th>' + '<td class="alt">' + Msrp[i] + '</td>' + '<td class="alt">' + blah[i] + '</td>' + '<td class="alt">' + blahs[i] + '</td>' + '</tr>' + theHTML; x--; } } theHTML = '<table id="mytable" cellspacing="0">' + '<tr>' + '<th scope="col" abbr="Configurations" class="nobg">Part Number</th>' + '<th scope="col" abbr="Dual 1.8">Msrp Price</th>' + '<th scope="col" abbr="Dual 2">blahs Price</th>' + '<th scope="col" abbr="Dual 2.5">Low Price</th>' + '</tr>' + theHTML + '</table>'; $('#example').append(theHTML); } </script> <div id="example"> </div> The problem being that the $('#example').append(theHTML); never executes (or shows on the page). I think its because the string is soooooo long! It has over 7,000 items in the array so im not sure if thats the reason or if its something else? Any help would be great! Thanks! David

    Read the article

  • Best window manager for Linux for Virtual Desktop / Multimon

    - by mattcodes
    Previous used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties: 1) Supports virtual desktop (need 4 minimum) 2) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) 3) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first window when 2nd screen is unplugged 4) Keyboard shortcut friendly 5) Not too hard to install 6) Works well with minimum hardware such as integrated graphics Please suggest and share your experiences

    Read the article

  • SQL Transactional Replication snapshot not applying

    - by dmch2
    Hi, I'm using SQL Transactional Replication with pull subscriptions to replicate databases (hosting their own distribution database) from several servers across a VPN to a central server. I've got the first 2 databases working fine but the 3rd one is causing me problems. My subscription server is SQL 2008, the source systems are all SQL 2005. The source databases are a few 100Mb in size and contain audit data so are simply growing slowly by adding new records at approx 1kb a second. As far as the replication monitor, Agent logs and event logs show everything is working fine - except that no data appears in my subscription database. The distribution agent doesn't seem to want to read the snapshot (and hence the initial state and schema) from the publisher. New transactions aren't applied although they do seem to be arriving OK as the replication monitor shows things like '5 transactions with 10 commands were delivered'. I would expect (as in previous times) to see statements about data being BCPed in the replication monitor. The snapshot is on the publisher on a shared folder. The subscriber can view the snapshot OK (\\repldata) and the alt snapshot folder is pointing at it. But the distribution agent doesn't seem to be making an attempt to do read it. I tried changing the snapshot path to something that's incorrect and didn't even get an error saying that it couldn't access it. After lots of googling etc I found that sp_MSget_repl_commands is called by the subscriber on the distribution database on the publisher. Running a profiler I can see that it's only called for one agent Id. After a reinit it's called for sequence number 0x0 as expected so I thought that would mean it's would look for the snapshot. However, looking on the publisher I see that there's data for two agents - the snapshot agent and the log reader agent (which is being queries). So I guess I need to tell the distribution agent to get the data for both. But how? and more importantly - why? It worked fine on the other two servers I've replicated. I'm not an SQL novice but this is pretty much my first go at replication so don't be afraid to accuse me of missing something obvious/stupid! I can get log files (eg from the distribution agent) if you want but they don't seem to have any errors in them - it just starts up and starts applying log reader agent changes. Cheers Dave

    Read the article

  • Snow Leopard Hangs at Login Window

    - by jessecurry
    I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

    Read the article

  • T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

    - by edelwater
    Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the VGA output works. Symptom: Screen blanks / no display, but it works on the second monitor Steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noise of about 10 seconds) - right after the sounds ends, the monitor gets black. Sometimes it seems to be the same each time. Software: Installed no new software before/after, running ZoneAlarm and antivirus. Other: It does not feel hot in any place, there don't seem to be running processes with strange behaviour. Warranty: Out of warranty What was I doing: Typing text on a website and doing some PHP coding in a text editor. What can I do here other than buy a new laptop? Does it sound familiar to known cases? Update 1: Exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj), http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 And here: "I have that same problem. I replaced the CCRL on mine and it works fine when the screen is not screwed in. Once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the LCD display is no use, he tried it three times). Same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core issue but some electric issue so it seems replacing the LCD is not the thing to do here. If it is not the LCD that needs to be replaced (see other threads), which parts can I order to fix this? Is there any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense? Update 2: I replaced the inverter with another inverter, but IO have the same problem. I DID notice that the inverter is the component that makes the sssssssssssssHHHHHHHHHH sound AND it becomes very hot in a few seconds. (So both the old and the test one) The problem is hmmm wat is then the thing that makes the inverter hot by (assumption) after which it shuts itself down. Is it either the input or the output? The output seems to me not, because the screen seems to function so it must be the electricity coming in. But what causes it to become so hot would it be the VGA card outputting some unusual high voltage seems unlikely? I am looking for the component to order / replace update 3: Great news. Ewendish gave me the hint to look in the BIOS. While I was in the BIOS I noticed that the screen did not switch off and there was not a high pitched sound. So I lowered some settings in the BIOS. I then noticed that with brightness turned to 0 (via FN End), it does not make a high pitched sound and does not turn off, with brightness turned up just three "stripes" it starts making the sound. So I could from now on work under lowest brightness modus or... see where the problem lies. So as stated below with either power management or display drivers / ATI Catalyst settings / Windows display settings. I'm trying to see where it lies, but I will google some first. Update 4: I wiped clean the Windows XP installation and installed Windows 7 on it. Unfortunately the problem remains: as soon as the brightness goes up the screen starts hissing. This means... back to original thought: it probably IS a hardware problem. Although ... again... if it is NOT the inverter, what is it? Could it be the backlightning component? I could try to switch that with a another T60... but this is quite tricky.

    Read the article

  • oracle sql query to list all the dates of previous month

    - by Suresh S
    Guys i have a requirement to list all the dates of the previous month like below 20101201 20101202 20101203 20101204 20101205 .. .. .. .. .. .. .. .. 20101231 kindly let me know if any better way to do than this query. select TO_CHAR(TRUNC(SYSDATE,'MM')-1,'YYYYMMDD')-(level-1) as EACH_DATE from dual A connect by level < (TO_NUMBER(TO_CHAR(TRUNC(SYSDATE,'MM')-1,'DD'))+1) Also please let me know the problem with this query it says "missing right parenthesis" SELECT /*+ PARALLEL (A,8) */ /*+ DRIVING_STATE */ TO_CHAR(TRUNC(TRUNC(SYSDATE,'MM')-1,'MM'),'MONYYYY') "MONTH", TYPE AS "TRAFF", COLUMN, A_COUN AS "A_COUNT",COST FROM DATA_P B WHERE EXISTS ( select TO_NUMBER(TO_CHAR(TRUNC(SYSDATE,'MM')-1,'YYYYMMDD')-(level-1)) EACH_DATE from dual A connect by level < TO_NUMBER(TO_CHAR(TRUNC(SYSDATE,'MM')-1,'DD')+1) WHERE A.EACH_DATE = B.DATE order by EACH_DATE ASC )

    Read the article

  • Lightweight window manager for Linux for Virtual Desktop / Multimon

    - by mattcodes
    Previous used Ubuntu Gnome with Compiz but for my basic spec intel macbook (4 years old) its a little too heavyweight. So for now Im back on my macbook with os x, but now considering going back to Linux. Im looking for a window manager that has the following properties: Supports virtual desktop (need 4 minimum) Works well with multi monitors - can move an app with shortcut from one monitor to the other (on same virtual desktop) Can remember window position (i.e. open vim on 2 monitor) - however must coerce everything back to first screen when 2nd screen is unplugged Keyboard shortcut friendly Not too hard to install Works well with minimum hardware such as integrated graphics Please suggest and share your experiences

    Read the article

  • Linux released memory

    - by user59088
    If My process allocates some big memory and then deallocates, would top or gnome-system-monitor show that my memory usage of that process decreased ? or kernel will still reserve that memory for that process ? What I see is I am deallocating memory. But I still see gnome-system-monitor displaying growing memory for my program. I don't find memory leak in my end. I want to know whether its not displaying released memory ? or there is really a memory leak at my end ?

    Read the article

  • Running ubuntu 10.04 without a laptop's primary display

    - by riteshmnayak
    I have an IBM thinkpad(R50e) whose display is broken. I would still like to use the laptop by connecting it to an external monitor and keyboard/mouse. This is what I did: Removed the hard disk from the broken IBM Put the hard disk in the working IBM and installed 10.04 on it. It booted fine and I installed many packages and stuff. I put the hard disk back into the broken display IBM thinking I could use it by connecting it to an external monitor that I own. Well, it turns out that while booting, the display shows up but because the display shifts from the VGA display to the primary display mid-boot, the laptop does not boot. Is there a way in which I can force the laptop to not use its primary display while booting. I looked at Randr and also grub.conf settings but nothing seemed to work. Please help!

    Read the article

  • Mint 13 does nothing when laptop lid is closed

    - by ewok
    I have a laptop running Mint 13. I have it hooked up to a 30" monitor and have no use for the laptop being open, so I put it on a shelf and close it. When I do that, the monitor goes blank. The power manager does not have an option for doing nothing when the lid is closed. The options are "Blank Screen", "Suspend", and "Shutdown". Is there a way to make the laptop not go to a blank screen when the lid is closed?

    Read the article

  • How to make a video card use DVI output by default in text mode?

    - by Igor Zinov'yev
    I have an ASUS ENGT440/DI1GD5 video card which has three outputs: DVI, D-Sub and HDMI. I am using both D-Sub and DVI, but my main monitor is connected to the DVI output. Everything works fine except for the text mode. The card somehow uses the D-Sub output in text mode when both monitors are connected (when I disconnect the D-Sub output and leave only the primary monitor connected to the DVI output, it's being used correctly). How do I make the card use only the DVI output (or both) in text mode?

    Read the article

  • Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

    - by Chake
    here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

    Read the article

  • Can't set correct desktop resolution on Windows 7 after playing Mirror's Edge

    - by DeadMG
    Ever since I launched Mirror's Edge, my entire system seems to think that my monitor is 1600x1200, when actually it's 1920x1080. The game would only go up to 1600x1200, Windows will only go up to 1600x1200, and even my video drivers will only go up that high. The monitor isn't even that aspect ratio. I've rebooted the system to no effect, and installed the latest graphics drivers for my Radeon 5770, unplugged it and re-plugged it, etc. My secondary screen is still working perfectly correctly. Any suggestions?

    Read the article

  • My Windows 7 computer is stuck in a refresh rate not supported by my display. How can I fix this?

    - by Tim Keating
    Star Wars: The Old Republic apparently decided that my screen res should be 1680x1050 at 75hz. I have an older monitor that doesn't support that refresh rate. I fixed this problem within the game, but subsequently I alt-tabbed out of the game to the desktop & it reset me to those settings. Now my monitor shows a blank screen with "out of range" in Windows, and these settings persist even through a reboot. I booted into safe mode, but of course while there, I can only change the settings for the default driver. How can I get my machine back into a usable state?

    Read the article

  • Display is slightly blurry on (native) 1920x1080 resolution

    - by Martin Tuskevicius
    I have a computer monitor that is approximately 23" in size. Its native resolution is 1920x1080, and Windows 7 will not allow it to be any higher. However, I cannot make the resolution a little lower as well. When I right-click on my desktop and select 'Screen resolution,' the vertical slider has only two options: 1920x1080 and 1280x720. There are no real problems that I am having besides the fact that the image is slightly blurry. I can easily make things out and see them, but I definitely feel that the image is not as clear as it could be. My graphics card is ATI Radeon HD 5450 and it has the latest graphics drivers installed. I've tried playing around with the AMD VISION Engine Control Center to see if I can change an option to make the image clearer, but I had no luck. I did find one odd thing, though. When I lowered the refresh rate from 60Hz to 50Hz, the image kind of "zoomed in" but it also became perfectly clear like I would expect it to look. The problem is that when I use 50Hz, the image zooms in a little on the center and I lose maybe an inch and a half of the screen (I do not see the bar at the top of applications, I do not see the Windows taskbar thing, etc). I figured if I could somehow zoom in so that the entire image fills the screen (not the slightly cropped version) then I would have the perfectly crisp image of 50Hz, and also the uncropped image of 60Hz. However, upon zooming in, the image began to look blurry again just like it did with 60Hz. So I am at a loss here. I do not know how to make the image look as clear as it should. I have the latest drivers (I updated them today) and I know that my monitor supports the resolution that I am trying to use. Has anybody experienced something like this before? I'd really appreciate any input - thanks! Update: I have figured out how to make the display look crisp! I set it to the 50Hz option, and then I changed the scaling through the monitor itself, rather than software. Now, however, I am finding that games look pretty bad because since it is clear, the lower quality really becomes apparent. I cannot run new games at 1080p, so I run them at the lowest resolution possible (1280x720, since it is the only other option offered, as I have mentioned). So I am wondering, is there a way to have Windows display more resolution options?

    Read the article

  • Do you know a script for email round trip monitoring?

    - by crazyfr
    Do you know a simple script that can do email round trip monitoring ? I want to monitor email service on A. I install the script on B. B sends an email to A A sends an auto-reply to B B knows that email service is working well. B restarts this test every 30min. If B didn't received replies, it sends an alert message. B could also monitor round-trip delay of emails. I have not access to the email service, I can only ask new end user email and configure auto-reply. B is an Ubuntu. Thanks!

    Read the article

  • Games + Closed Lid = Hibernation

    - by Isaac Rabinovitch
    I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

    Read the article

  • 3 Monitors on a Notebook

    - by Rihan Meij
    I would like to use 3 screens on my Dell Inspiron 1720 So On the laptop built in screen have that as one, and then have 2 more screens. The catch is, that I want to play racing games with this set-up. So that my main screen is the focus area (the front window if you will) and the other 2 screens will be used for peripheral vision, on the side. The software that I use (LFS.net) does support multiple screens. However the notebook can have the main screen on, and another external screen. So I would need to split this "second" monitor output, to 2 screens, the one to the left of the main monitor, and the other one to the right. Is this possible? Is there perhaps a external card / docking station solution that could help with this? Any advice or ideas is greatly appreciated. Best Regards Rihan

    Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >