ethernet switch - Page 139

Have to dhclient each restart to access internet

- by Zeophlite

So each time I restart my ubuntu server (virtual 10.04, via Xencenter), I have to call dhclient before I can access the internet: http://img813.imageshack.us/i/dhclient.png/ What do I need to change to get internet access automatically? Apologies for posting images, I'm using Xencenter, so I can't copy/paste the console output EDIT:: daniel@workwork:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.69.136 netmask 255.255.255.0 network 192.168.69.0 broadcast 192.168.69.255 gateway 192.168.69.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.69.120 dns-search workwork.com.au daniel@workwork:~$ ifconfig eth0 Link encap:Ethernet HWaddr ae:11:14:22:0a:03 inet6 addr: fe80::ac11:14ff:fe22:a03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:85 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10496 (10.4 KB) TX bytes:13086 (13.0 KB) Interrupt:32 Base address:0x6000 eth1 Link encap:Ethernet HWaddr b2:2c:40:f2:a0:fa inet addr:192.168.69.167 Bcast:192.168.69.255 Mask:255.255.255.0 inet6 addr: fe80::b02c:40ff:fef2:a0fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13448 errors:0 dropped:0 overruns:0 frame:0 TX packets:3100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7679428 (7.6 MB) TX bytes:282286 (282.2 KB) Interrupt:36 Base address:0xa100 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:179 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:36905 (36.9 KB) TX bytes:36905 (36.9 KB) daniel@workwork:/var/lib/dhcp3$ cat dhclient.leases lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 07:36:53; rebind 5 2011/03/18 11:35:39; expire 5 2011/03/18 12:35:39; } lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 08:51:58; rebind 5 2011/03/18 12:24:16; expire 5 2011/03/18 13:24:16; } daniel@workwork:/var/lib/dhcp3$ cat dhclient.eth0.leases daniel@workwork:/var/lib/dhcp3$ ifconfig eth1 before and after dhclient http://img692.imageshack.us/i/prepost.png/

Read the article

Linux Kernel not passing through multicast UDP packets

- by buecking

Recently I've set up a new Ubuntu Server 10.04 and noticed my UDP server is no longer able to see any multicast data sent to the interface, even after joining the multicast group. I've got the exact same set up on two other Ubuntu 8.04.4 LTS machines and there is no problem receiving data after joining the same multicast group. The ethernet card is a Broadcom netXtreme II BCM5709 and the driver used is: b $ ethtool -i eth1 driver: bnx2 version: 2.0.2 firmware-version: 5.0.11 NCSI 2.0.5 bus-info: 0000:01:00.1 I'm using smcroute to manage my multicast registrations. b$ smcroute -d b$ smcroute -j eth1 233.37.54.71 After joining the group ip maddr shows the newly added registration. b$ ip maddr 1: lo inet 224.0.0.1 inet6 ff02::1 2: eth0 link 33:33:ff:40:c6:ad link 01:00:5e:00:00:01 link 33:33:00:00:00:01 inet 224.0.0.1 inet6 ff02::1:ff40:c6ad inet6 ff02::1 3: eth1 link 01:00:5e:25:36:47 link 01:00:5e:25:36:3e link 01:00:5e:25:36:3d link 33:33:ff:40:c6:af link 01:00:5e:00:00:01 link 33:33:00:00:00:01 inet 233.37.54.71 <------- McastGroup. inet 224.0.0.1 inet6 ff02::1:ff40:c6af inet6 ff02::1 So far so good, I can see that I'm receiving data for this multicast group. b$ sudo tcpdump -i eth1 -s 65534 host 233.37.54.71 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65534 bytes 09:30:09.924337 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 09:30:09.947547 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 09:30:10.108378 IP 192.164.1.120.58866 > 233.37.54.71.15574: UDP, length 268 09:30:10.196841 IP 192.164.1.120.58848 > 233.37.54.71.15572: UDP, length 212 ... I can also confirm that the interface is receiving mcast packets. b $ ethtool -S eth1 | grep mcast_pack rx_mcast_packets: 103998 tx_mcast_packets: 33 Now here's the problem. When I try to capture the traffic using a simple ruby UDP server I receive zero data! Here's a simple server that reads data send on port 15572 and prints the first two characters. This works on the two 8.04.4 Ubuntu Servers, but not the 10.04 server. require 'socket' s = UDPSocket.new s.bind("", 15572) 5.times do text, sender = s.recvfrom(2) puts text end If I send a UDP packet crafted in ruby to localhost, the server receives it and prints out the first two characters. So I know that the server above is working correctly. irb(main):001:0> require 'socket' => true irb(main):002:0> s = UDPSocket.new => #<UDPSocket:0x7f3ccd6615f0> irb(main):003:0> s.send("I2 XXX", 0, 'localhost', 15572) When I check the protocol statistics I see that InMcastPkts is not increasing. While on the other 8.04 servers, on the same network, received a few thousands packets in 10 seconds. b $ netstat -sgu ; sleep 10 ; netstat -sgu IcmpMsg: InType3: 11 OutType3: 11 Udp: 446 packets received 4 packets to unknown port received. 0 packet receive errors 461 packets sent UdpLite: IpExt: InMcastPkts: 4654 <--------- Same as below OutMcastPkts: 3426 InBcastPkts: 9854 InOctets: -1691733021 OutOctets: 51187936 InMcastOctets: 145207 OutMcastOctets: 109680 InBcastOctets: 1246341 IcmpMsg: InType3: 11 OutType3: 11 Udp: 446 packets received 4 packets to unknown port received. 0 packet receive errors 461 packets sent UdpLite: IpExt: InMcastPkts: 4656 <-------------- Same as above OutMcastPkts: 3427 InBcastPkts: 9854 InOctets: -1690886265 OutOctets: 51188788 InMcastOctets: 145267 OutMcastOctets: 109712 InBcastOctets: 1246341 If I try forcing the interface into promisc mode nothing changes. At this point I'm stuck. I've confirmed the kernel config has multicast enabled. Perhaps there are other config options I should be checking? b $ grep CONFIG_IP_MULTICAST /boot/config-2.6.32-23-server CONFIG_IP_MULTICAST=y Any thoughts on where to go from here?

Read the article

Why my laptop sends ARP request to itself ?

- by user58859

I have just started to learn about protocols. While studying the packets in wireshark, I came across a ARP request sent by my machine to my own IP. Here is the details of the packet : No. Time Source Destination Protocol Info 15 1.463563 IntelCor_aa:aa:aa Broadcast ARP Who has 192.168.1.34? Tell 0.0.0.0 Frame 15: 42 bytes on wire (336 bits), 42 bytes captured (336 bits) Arrival Time: Jan 7, 2011 18:51:43.886089000 India Standard Time Epoch Time: 1294406503.886089000 seconds [Time delta from previous captured frame: 0.123389000 seconds] [Time delta from previous displayed frame: 0.123389000 seconds] [Time since reference or first frame: 1.463563000 seconds] Frame Number: 15 Frame Length: 42 bytes (336 bits) Capture Length: 42 bytes (336 bits) [Frame is marked: False] [Frame is ignored: False] [Protocols in frame: eth:arp] [Coloring Rule Name: ARP] [Coloring Rule String: arp] Ethernet II, Src: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa), Dst: Broadcast (ff:ff:ff:ff:ff:ff) Destination: Broadcast (ff:ff:ff:ff:ff:ff) Address: Broadcast (ff:ff:ff:ff:ff:ff) .... ...1 .... .... .... .... = IG bit: Group address (multicast/broadcast) .... ..1. .... .... .... .... = LG bit: Locally administered address (this is NOT the factory default) Source: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) Address: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) .... ...0 .... .... .... .... = IG bit: Individual address (unicast) .... ..0. .... .... .... .... = LG bit: Globally unique address (factory default) Type: ARP (0x0806) Address Resolution Protocol (request) Hardware type: Ethernet (0x0001) Protocol type: IP (0x0800) Hardware size: 6 Protocol size: 4 Opcode: request (0x0001) [Is gratuitous: False] Sender MAC address: IntelCor_aa:aa:aa (aa:aa:aa:aa:aa:aa) Sender IP address: 0.0.0.0 (0.0.0.0) Target MAC address: 00:00:00_00:00:00 (00:00:00:00:00:00) Target IP address: 192.168.1.34 (192.168.1.34) Here the sender's mac address is mine(Here I have hiden my mac address). target IP is mine. Why my machine is sending ARP request to itself? I found 3 packets of this type. There was no ARP reply for these packets. Can anybody explain me why it is? (My operating system is windows-7. I am directly connected to a wifi modem. I got these packets as soon as I started my connection.) I want one suggestion also. many places I read that RFC's are enough for study about protocols. I studied the RFC 826 on ARP. I personally feel that is not enough at all. Any suggestion regarding this? Is there more then 1 RFC for a protocol? I want to study about the protocols in very detail. Can anybody guide me for this? Thanks in advance.

Read the article

Bridging a non-persistent PPP connection to wireless (or wired) in Windows XP

- by phooze

I have a 3G modem-like device (eMobile's D01NX, PC card style, for any Japan nerds out there) that I use to connect my PC to the Internet. I'd like to bridge this connection with another computer either via an ad-hoc wireless network, or a simple cross-over cable (either are options). However, when I open "Network Connections", I do not see the PPP connection (otherwise I could click both and bridge). I believe this is because there is software (provided by the vendor) that is handling the card directly and registering a PPP connection dynamically. When connected, an ipconfig at the command line yields: Ethernet adapter wireless: Connection-specific DNS Suffix . : Autoconfiguration IP Address. . . : 169.254.5.169 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Ethernet adapter lan: Media State . . . . . . . . . . . : Media disconnected PPP adapter {B59EEDDE-A22B-48DF-93E5-04842B641257}: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 114.xx.xxx.xx Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : 114.xx.xxx.xx (I've commented out my IP address for privacy reasons, but what does appear there is a functional Internet IP address.) When I disconnect the adapter with the vendor software, the PPP connection disappears completely from the ipconfig list. Any ideas on how to do this?

Read the article

obtaining nimbuzz server certificate for nmdecrypt expert in NetMon

- by lurscher

I'm using Network Monitor 3.4 with the nmdecrypt expert. I'm opening a nimbuzz conversation node in the conversation window and i click Expert- nmDecrpt - run Expert that shows up a window where i have to add the server certificate. I am not sure how to retrieve the server certificate for nimbuzz XMPP chat service. Any idea how to do this? this question is a follow up question of this one. Edit for some background so it might be that this is encrypted with the server pubkey and i cannot retrieve the message, unless i debug the native binary and try to intercept the encryption code. I have a test client (using agsXMPP) that is able to connect with nimbuzz with no problems. the only thing that is not working is adding invisible mode. It seems this is some packet sent from the official client during login which i want to obtain. any suggestions to try to grab this info would be greatly appreciated. Maybe i should get myself (and learn) IDA pro? This is what i get inspecting the TLS frames on Network Monitor: Frame: Number = 81, Captured Frame Length = 769, MediaType = ETHERNET + Ethernet: Etype = Internet IP (IPv4),DestinationAddress:[...],SourceAddress:[....] + Ipv4: Src = ..., Dest = 192.168.2.101, Next Protocol = TCP, Packet ID = 9939, Total IP Length = 755 - Tcp: Flags=...AP..., SrcPort=5222, DstPort=3578, PayloadLen=715, Seq=4101074854 - 4101075569, Ack=1127356300, Win=4050 (scale factor 0x0) = 4050 SrcPort: 5222 DstPort: 3578 SequenceNumber: 4101074854 (0xF4716FA6) AcknowledgementNumber: 1127356300 (0x4332178C) + DataOffset: 80 (0x50) + Flags: ...AP... Window: 4050 (scale factor 0x0) = 4050 Checksum: 0x8841, Good UrgentPointer: 0 (0x0) TCPPayload: SourcePort = 5222, DestinationPort = 3578 TLSSSLData: Transport Layer Security (TLS) Payload Data - TLS: TLS Rec Layer-1 HandShake: Server Hello.; TLS Rec Layer-2 HandShake: Certificate.; TLS Rec Layer-3 HandShake: Server Hello Done. - TlsRecordLayer: TLS Rec Layer-1 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 42 (0x2A) - SSLHandshake: SSL HandShake ServerHello(0x02) HandShakeType: ServerHello(0x02) Length: 38 (0x26) - ServerHello: 0x1 + Version: TLS 1.0 + RandomBytes: SessionIDLength: 0 (0x0) TLSCipherSuite: TLS_RSA_WITH_AES_256_CBC_SHA { 0x00, 0x35 } CompressionMethod: 0 (0x0) - TlsRecordLayer: TLS Rec Layer-2 HandShake: ContentType: HandShake: - Version: TLS 1.0 Major: 3 (0x3) Minor: 1 (0x1) Length: 654 (0x28E) - SSLHandshake: SSL HandShake Certificate(0x0B) HandShakeType: Certificate(0x0B) Length: 650 (0x28A) - Cert: 0x1 CertLength: 647 (0x287) - Certificates: CertificateLength: 644 (0x284) - X509Cert: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: - TbsCertificate: Issuer: nimbuzz.com,Nimbuzz,NL, Subject: nimbuzz.com,Nimbuzz,NL + SequenceHeader: + Tag0: + Version: (2) + SerialNumber: -1018418383 + Signature: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Issuer: nimbuzz.com,Nimbuzz,NL - RdnSequence: nimbuzz.com,Nimbuzz,NL + SequenceOfHeader: 0x1 + Name: NL + Name: Nimbuzz + Name: nimbuzz.com + Validity: From: 02/22/10 20:22:32 UTC To: 02/20/20 20:22:32 UTC + Subject: nimbuzz.com,Nimbuzz,NL - SubjectPublicKeyInfo: RsaEncryption (1.2.840.113549.1.1.1) + SequenceHeader: + Algorithm: RsaEncryption (1.2.840.113549.1.1.1) - SubjectPublicKey: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 141, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 141 bytes BitString: + Tag3: + Extensions: - SignatureAlgorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - SequenceHeader: - AsnId: Sequence and SequenceOf types (Universal 16) + LowTag: - AsnLen: Length = 13, LengthOfLength = 0 Length: 13 bytes, LengthOfLength = 0 + Algorithm: Sha1WithRSAEncryption (1.2.840.113549.1.1.5) - Parameters: Null Value - Sha1WithRSAEncryption: Null Value + AsnNullHeader: - Signature: - AsnBitStringHeader: - AsnId: BitString type (Universal 3) - LowTag: Class: (00......) Universal (0) Type: (..0.....) Primitive TagValue: (...00011) 3 - AsnLen: Length = 129, LengthOfLength = 1 LengthType: LengthOfLength = 1 Length: 129 bytes BitString: + TlsRecordLayer: TLS Rec Layer-3 HandShake:

Read the article

vagrant fails to bring up additional adapter for centos vm using virtual box provider

- by Anadi Misra

this is in continuation of the question asked here about host only adapter on dhcp I upgraded to vagrant 1.6.3 and the updated Vagrantfile to following setting for multiple adapters # add additional adapter for inter machine networking dev.vm.network :private_network, :type => "dhcp", :adapter => "2", :netmask => "255.255.255.0" it goes through creating adapters but then fails bringing up the mic on vm Anadis-MacBook-Pro:full-stack-env anadi$ vagrant up Bringing machine 'full-stack-env' up with 'virtualbox' provider... ==> full-stack-env: Clearing any previously set forwarded ports... ==> full-stack-env: Clearing any previously set network interfaces... ==> full-stack-env: Preparing network interfaces based on configuration... full-stack-env: Adapter 1: nat full-stack-env: Adapter 2: hostonly ==> full-stack-env: Forwarding ports... full-stack-env: 22 => 4223 (adapter 1) full-stack-env: 8080 => 8090 (adapter 1) ==> full-stack-env: Running 'pre-boot' VM customizations... ==> full-stack-env: Booting VM... ==> full-stack-env: Waiting for machine to boot. This may take a few minutes... full-stack-env: SSH address: 127.0.0.1:4223 full-stack-env: SSH username: vagrant full-stack-env: SSH auth method: private key full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Remote connection disconnect. Retrying... ==> full-stack-env: Machine booted and ready! ==> full-stack-env: Checking for guest additions in VM... ==> full-stack-env: Setting hostname... ==> full-stack-env: Configuring and enabling network interfaces... The following SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed! ARPCHECK=no /sbin/ifup eth 2> /dev/null Stdout from the command: Device eth does not seem to be present, delaying initialization. Stderr from the command: how ever when I log in to the environment I see two network interfaces as expected Anadis-MacBook-Pro:full-stack-env anadi$ vagrant ssh Last login: Wed Jun 4 12:54:47 2014 from 10.0.2.2 [vagrant@full-stack-env ~]$ ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:BD:39:57 inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:3957/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:511 errors:0 dropped:0 overruns:0 frame:0 TX packets:360 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54574 (53.2 KiB) TX bytes:46675 (45.5 KiB) eth1 Link encap:Ethernet HWaddr 08:00:27:A3:86:C9 inet addr:172.28.128.3 Bcast:172.28.128.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:86c9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1360 (1.3 KiB) TX bytes:894 (894.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) I am bit confused here on why it is trying to add another mic (eth2)? In the VM I used for creating this vagrant box, I had added two NICs already.

Read the article

How to use Public IP in case of two ISP when two differs from each other

- by user1471995

Please bare with my long explanation but this is important to explain the actual problem. Please also pardon my knowledge with PFsense as i am new to this. I have single PFSense box with 3 Ethernet adapter. Before moving to configuration for these, i want to let you know i have two Ethernet based Internet Leased Line Connectivity let's call them ISP A and ISP B. Then last inetrface is LAN which is connected to network switch. Typical network diagram ISP A ----- PFSense ----> Switch ---- > Servers ISP B ----- ISP A (Initially Purchased) WAN IP:- 113.193.X.X /29 Gateway IP :- 113.193.X.A and other 4 usable public IP in same subnet(So the gateway for those IP are also same). ISP B (Recently Purchased) WAN IP:- 115.115.X.X /30 Gateway IP :- 115.115.X.B and other 5 usable public IP in different subnet(So the gateway for those IP is different), for example if 115.119.X.X2 is one of the IP from that list then the gateway for this IP is 115.119.X.X1. Configuration for 3 Interfaces Interface : WAN Network Port : nfe0 Type : Static IP Address : 113.193.X.X /29 Gateway : 113.193.X.A Interface : LAN Network Port : vr0 Type : Static IP Address : 192.168.1.1 /24 Gateway : None Interface : RELWAN Network Port : rl0 Type : Static IP Address : 115.115.X.X /30 (I am not sure of the subnet) Gateway : 115.115.X.B To use Public IP from ISP A i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- WAN TCP/UDP * * 113.193.X.X1 53 (DNS) 192.168.1.5 53 (DNS) WAN TCP/UDP * * 113.193.X.X1 80 (HTTP) 192.168.1.5 80 (HTTP) WAN TCP * * 113.193.X.X2 80 (HTTP) 192.168.1.7 80 (HTTP) etc., c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the WAN those are only present. d) If this section in relevant then for Firewall: Rules at WAN tab then following default rule has been generated. * RFC 1918 networks * * * * * Block private networks * Reserved/not assigned by IANA * * * * * * To use Public IP from ISP B i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- RELWAN TCP/UDP * * 115.119.116.X.X1 80 (HTTP) 192.168.1.11 80 (HTTP) c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the RELWAN those are only present. d) If this section in relevant then for Firewall: Rules at RELWAN tab then following default rule has been generated. * RFC 1918 networks * * * * * * Reserved/not assigned by IANA * * * * * * Last thing before my actual query is to make you aware that to have multiple Wan setup i have done following steps a) Under System: Gateways at Groups Tab i have created new group as following MultipleGateway WANGW, RELWAN Tier 2,Tier 1 Multiple Gateway Test b) Then Under Firewall: Rules at LAN tab i have created a rule for internal traffic as follows * LAN net * * * MultipleGateway none c) This setup works if unplug first ISP traffic start routing using ISP 2 and vice-versa. Now my main query and problem is i am not able to use public IP address allocated by ISP B, i have tried many small tweaks but not successful in anyone. The notable difference between the two ISP is a) In case of ISP A there Public usable IP address are on same subnet so the gateway used for the WAN ip is same for the other public IP address. b) In case of ISP B there public usable IP address are on different subnet so the obvious the gateway IP for them is different from WAN gateway's IP. Please let me know how to use ISP B public usable IP address, in future also i am going to rely for more IPs from ISP B only.

Read the article

IPv6: Should I have private addresses?

- by AlReece45

Right now, we have a rack of servers. Every server right now has at least 2 IP addresses, one for the public interface, another for the private. The servers that have SSL websites on them have more IP addresses. We also have virtual servers, that are configured similarly. Private Network The private range is currently just used for backups and monitoring. Its a gigabit port, the interface usage does not usually get very high. There are other technologies we're considering using that would use this port: iSCSI (implementations usually recommends dedicating an interface to it, which would be yet another IP network), VPN to get access to the private range (something I'd rather avoid) dedicated database servers LDAP centralized configuration (like puppet) centralized logging We don't have any private addresses in our DNS records (only public addresses). For our servers to utilize the correct IP address for the right interface (and not hard code the IP address) probably requires setting up a private DNS server (So now we add 2 different dns entries to 2 different systems). Public Network Our public range has a variety of services include web, email, and ftp. There is a hardware firewall between our network and the "public" network. We have (relatively secure) method to instruct the firewall to open and close administrative access (web interfaces, ssh, etc) for our current IP address. With either solution discussed, the host-based firewalls will be configured as well. The public network currently runs at a dedicated 20Mbps link. There are a couple of legacy servers with fast-ethernet ports, but they are scheduled for decommissioning. All of the other production boxes have at least 2 Gigabit Ethernet ports. The more traffic-heavy servers have 4-6 available (none is using more than the 2 Gigabit ports right now). IPv6 I want to get an IPv6 prefix from our ISP. So at least every "server" has at least one IPv6 interface. We'll still need to keep the IPv4 addressees up and available for legacy clients (web servers and email at the very least). We have two IP networks right now. Adding the public IPv6 address would make it three. Just use IPv6? I'm thinking about just dumping the private IPv4 range and using the IPv6 range as the primary means of all communications. If an interface starts reaching its capacity, utilize the newly free interfaces to create a trunk. It has the advantage that if either the public or private traffic needs to exceed 1Gbps. The traffic for each interface is already analyzed on a regular basis to predict future bandwidth use. In the rare instances where bandwidth unexpected peaks: utilize QoS to ensure traffic (like our limited SSH access) is prioritized correctly so the problem can be corrected (if possible, our WAN is the bottleneck right now). It also has the advantage of not needing to make an entry for every private address. We may have private DNS (or just LDAP), but it'll be much more limited in scope with less entries to duplicate. Summary I'm trying to make this network as "simple" as possible. At the same time, I want to make sure its reliable, upgradeable, scalable, and (eventually) redundant. Having one IPv6 network, and a legacy IPv4 network seems to be the best solution to me. Regarding using assigned IPv6 addresses for both networks, sharing the available bandwidth on one (more trunked if needed): Are there any technical disadvantages (limitations, buffers, scalability)? Are there any other security considerations (asides from firewalls mentioned above) to consider? Are there regulations or other security requirements (like PCI-DSS) that this doesn't meet? Is there typical software for setting up a Linux network that doesn't have IPv6 support yet? (logging, ldap, puppet) Some other thing I didn't consider?

Read the article

What networking hardware do I need in this situation (Fairpoint [ISP] "E-DIA" connection)?

- by Tegeril

Right away you'd probably want to say, "Well just ask Fairpoint." I've done that, a number of times in as many different ways I can phrase it and just keep hitting a brick wall where they will not commit to giving any useful information and instead recommend contracting an outside firm and spending a pile of money. Anyway... I'm trying to help a family member out with an office connection that is being setup. I've managed to scrape tiny details here and there from our discussions with the ISP (Fairpoint in Maine) about what is going to be done and what is going to be needed. This is the connection that is being setup: http://www.fairpoint.com/enterprise/vantagepoint/e-dia/index.jsp Information I have been given: Via this connection I can get IPs across different C blocks if that were necessary (it is not) Fairpoint is bringing hardware with them that they claim simply does the conversion from whatever line is coming in the building to ethernet, they have referred to this as the "Fairpoint Netvanta" which I know suggests a line of products that I have looked up, but some (most? all?) of those seems to handle all the routing that I saw. Fairpoint says that I need to bring my own router to sit behind their device. They have literally declined to even suggest products that have worked for other clients in the past and fall back on "any business router works, not a home router." That alone makes my head spin. Detail and clarity hit a brick wall from there. At one moment I got them to cough up that the router I provide needs to be able to do VPN tunneling but they typically fall back to "not a home router" and I was even given "just a business router, Cisco or something, it'll be $500-$1000". Now I know that VPN tunneling routers exist well below that price point and since this connection is going to one machine, possibly two only via ethernet, my desire to purchase networking hardware that over-delivers what I need is not very high. They are literally setting all this up, have provided no configuration details for after they finish, and expect me to just plunk a $500+ router behind it and cross my fingers or contract out to a third party company. If there were other options available for the location, I would have dropped them in a second, but there aren't. The device that is connected requires a static IP and I'm honestly a bit hazy on the necessity of an additional router behind their device and generally a bit over my head. I presume that the router needs to be able to serve external static IPs to its clients, but I really don't know what is going to show up when they come to do the install. This was originally going to be run via an ADSL bridge modem with a range of static IPs (which is easy and is currently setup properly) but the location is too far from the telco to get speeds that we really want for upload and this is also a connection that needs high availability. Any suggestions would be greatly appreciated (I see a number of options in the Cisco Small Business line and other competitors that aren't going to break the bank…), especially if you've worked with Fairpoint before! Thanks for reading my wall of text.

Read the article

BlackBerry - TouchEvent on multiple managers

- by rupesh

Hi all i am new to blackberry application development here is my question i am using two verticalfieldmanager "layout" and "manager" in my application. layout has three custom button field and layout is inside manager. i am not able to implement touch event , here is my code: public class MenuScreen extends MainScreen { public MenuScreen() { super(Screen.DEFAULT_CLOSE); Bitmap menuBackgroundImage = Bitmap .getBitmapResource("com/greetings/Images/MenuBackground.jpg"); final VerticalFieldManager layout = new VerticalFieldManager() { public boolean touchEvent(TouchEvent message) { int x = message.getGlobalX(1); int y = message.getGlobalY(1); if (getExtent().contains(x, y)) { int fieldI = getFieldAtLocation(x, y); Field field = getField(fieldI); field.setFocus(); return super.touchEvent(message); } return false; } }; ButtonField categories = new ButtonField("Categories") { public void run() { Dialog.alert("one"); } public boolean touchEvent(TouchEvent message) { int x = message.getX(1); int y = message.getY(1); int w = getWidth(); int h = getHeight(); if (x >= 0 && x <= w && y >= 0 && y <= h) { switch (message.getEvent()) { case TouchEvent.DOWN: setFocus(); return true; case TouchEvent.UNCLICK: run(); return true; } } return false; } }; ButtonField help = new ButtonField("Help") { public void run() { Dialog.alert("help"); } public boolean touchEvent(TouchEvent message) { int x = message.getX(1); int y = message.getY(1); int w = getWidth(); int h = getHeight(); if (x >= 0 && x <= w && y >= 0 && y <= h) { switch (message.getEvent()) { case TouchEvent.DOWN: setFocus(); return true; case TouchEvent.UNCLICK: run(); return true; } } return false; } }; ButtonField developer = new ButtonField("Developer") { public void run() { Dialog.alert("Developer"); } public boolean touchEvent(TouchEvent message) { int x = message.getX(1); int y = message.getY(1); int w = getWidth(); int h = getHeight(); if (x >= 0 && x <= w && y >= 0 && y <= h) { switch (message.getEvent()) { case TouchEvent.DOWN: setFocus(); return true; case TouchEvent.UNCLICK: run(); return true; } } return false; } }; layout.add(categories); layout.add(help); layout.add(developer); VerticalFieldManager manager = new VerticalFieldManager() { protected void sublayout(int width, int height) { width = Display.getWidth(); height = Display.getHeight(); super.sublayout(width, height); setPositionChild(layout, width - 245, height - 350); setExtent(width, height); } }; manager.setBackground(BackgroundFactory .createBitmapBackground(menuBackgroundImage)); manager.add(layout); add(manager); } }

Read the article

c# SendMessage and Skype woes

- by Xcelled194

I'm trying to create an add-on to Skype with C#. I don't want to use Skype4COM, as I'd like the experience with messages and such. Unfortunately, the messages are tripping me up. I've got the pumps and such set up. They all work, and my app successfully sends the "APIDiscover" message to Skype, gets a "PendingAuth" response and then the "AttachSuccess" message. However, when I try to send "ping" to Skype (to which it should reply "pong") nothing happens. The return code from SendMessage is 0 but Marshall.GetLastWin32Error is 1400 (Invalid handle). The handle was returned with the AttachSuccess method. The equivalent C++ code does work, so I'm at a loss. First is the C++ code I'm using as a guide: Here's the (cut down) message pump. You can ignore everything but where I put the //<---- static LRESULT APIENTRY SkypeAPITest_Windows_WindowProc( HWND hWindow, UINT uiMessage, WPARAM uiParam, LPARAM ulParam) { LRESULT lReturnCode; bool fIssueDefProc; lReturnCode=0; fIssueDefProc=false; switch(uiMessage) { case WM_COPYDATA: if( hGlobal_SkypeAPIWindowHandle==(HWND)uiParam ) { PCOPYDATASTRUCT poCopyData=(PCOPYDATASTRUCT)ulParam; printf( "Message from Skype(%u): %.*s\n", poCopyData->dwData, poCopyData->cbData, poCopyData->lpData); lReturnCode=1; } break; default: if( uiMessage==uiGlobal_MsgID_SkypeControlAPIAttach ) { switch(ulParam) { case SKYPECONTROLAPI_ATTACH_SUCCESS: printf("!!! Connected; to terminate issue #disconnect\n"); hGlobal_SkypeAPIWindowHandle=(HWND)uiParam;//<---- Right here is where we receive the handle from Skype. break; } if( fIssueDefProc ) lReturnCode=DefWindowProc( hWindow, uiMessage, uiParam, ulParam); return(lReturnCode); } and this is the (again dumbed down) "sending message" code void __cdecl Global_InputProcessingThread(void *) { static char acInputRow[1024]; bool fProcessed; if( SendMessageTimeout( HWND_BROADCAST, uiGlobal_MsgID_SkypeControlAPIDiscover, (WPARAM)hInit_MainWindowHandle, 0, SMTO_ABORTIFHUNG, 1000, NULL)!=0 ) { while(Global_Console_ReadRow( acInputRow, sizeof(acInputRow)-1)) { if( fProcessed==false && hGlobal_SkypeAPIWindowHandle!=NULL ) { COPYDATASTRUCT oCopyData; // send command to skype oCopyData.dwData=0; oCopyData.lpData=acInputRow; oCopyData.cbData=strlen(acInputRow)+1; if( oCopyData.cbData!=1 ) { if( SendMessage( hGlobal_SkypeAPIWindowHandle, WM_COPYDATA, (WPARAM)hInit_MainWindowHandle, (LPARAM)&oCopyData)==FALSE ) { hGlobal_SkypeAPIWindowHandle=NULL; printf("!!! Disconnected\n"); } } } } } SendMessage( hInit_MainWindowHandle, WM_CLOSE, 0, 0); SetEvent(hGlobal_ThreadShutdownEvent); fGlobal_ThreadRunning=false; } And now here's my C# public bool PreFilterMessage(ref Message m) { Console.WriteLine(m.ToString()); if (m.Msg == WM_COPYDATA && SkypeAPIWindowHandle == m.WParam) { SkypeMessage(m); return true; } if (m.Msg == MsgApiAttach) { switch (m.LParam.ToInt32()) { case (int)SkypeControlAPIAttach.SUCCESS: SkypeAPIWindowHandle = m.WParam; //Here's where we set the Skype Handle AttachSuccess(m); return true; } } return false; //Defer all other messages } And here is my DLL import and Sending code [DllImport("user32.dll", CharSet = CharSet.Auto, SetLastError = false)] static extern IntPtr SendMessageA(IntPtr hWnd, UInt32 Msg, IntPtr wParam, ref MsgHelper.COPYDATASTRUCT lParam); public static void Command(string c) { if (c.Last() != '\0') c += "\0"; //Make string null terminated Console.WriteLine(); MsgHelper.COPYDATASTRUCT cda = new MsgHelper.COPYDATASTRUCT(); cda.dwData = new IntPtr(0); cda.lpData = c; cda.cbData = c.Length + 1; Marshal.GetLastWin32Error(); //Clear last error Console.WriteLine(SendMessageA(mHelper.SkypeAPIWindowHandle, MsgHelper.WM_COPYDATA, IntPtr.Zero, ref cda)); Console.WriteLine(Marshal.GetLastWin32Error()); } COPYDATASTRUCT is: public struct COPYDATASTRUCT { public IntPtr dwData; public int cbData; [MarshalAs(UnmanagedType.LPStr)] public string lpData; } I think that's everything. Let me know if I forgot something. Any ideas why I'm getting the 1400?

Read the article

Cannot Logout of Facebook with Facebook C# SDK

- by Ryan Smyth

I think I've read just about everything out there on the topic of logging out of Facebook inside of a Desktop application. Nothing so far works. Specifically, I would like to log the user out so that they can switch identities, e.g. People sharing a computer at home could then use the software with their own Facebook accounts, but with no chance to switch accounts, it's quite messy. (Have not yet tested switching Windows users accounts as that is simply far too much to ask of the end user and should not be necessary.) Now, I should say that I have set the application to use these permissions: string[] permissions = new string[] { "user_photos", "publish_stream", "offline_access" }; So, "offline_access" is included there. I do not know if this does/should affect logging out or not. Again, my purpose for logging out is merely to switch users. (If there's a better approach, please let me know.) The purported solutions seem to be: Use the JavaScript SDK (FB.logout()) Use "m.facebook.com" instead Create your own URL (and possibly use m.facebook.com) Create your own URL and use the session variable (in ASP.NET) The first is kind of silly. Why resort to JavaScript when you're using C#? It's kind of a step backwards and has a lot of additional overhead in a desktop application. (I have not tried this as it's simply disgustingly messy to do this in a desktop application.) If anyone can confirm that this is the only working method, please do so. I'm desperately trying to avoid it. The second doesn't work. Perhaps it worked in the past, but my umpteen attempts to get it to work have all failed. The third doesn't work. I've tried umpteen dozen variations with zero success. The last option there doesn't work for a desktop application because it's not ASP.NET and you don't have a session variable to work with. The Facebook C# SDK logout also no longer works. i.e. public FacebookLoginDialog(string appId, string[] extendedPermissions, bool logout) { IDictionary<string, object> loginParameters = new Dictionary<string, object> { { "response_type", "token" }, { "display", "popup" } }; _navigateUri = FacebookOAuthClient.GetLoginUrl(appId, null, extendedPermissions, logout, loginParameters); InitializeComponent(); } I remember it working in the past, but it no longer works now. (Which truly puzzles me...) It instead now directs the user to the Facebook mobile page, where the user must manually logout. Now, I could do browser automation to automatically click the logout link for the user, however, this is prone to breaking if Facebook updates the mobile UI. It is also messy, and possibly a worse solution than trying to use the JavaScript SDK FB.logout() method (though not by much). I have searched for some kind of documentation, however, I cannot find anything in the Facebook developer documentation that illustrates how to logout an application. Has anyone solved this problem, or seen any documentation that can be ported to work with the Facebook C# SDK? I am certainly open to using a WebClient or HttpClient/Response if anyone can point to some documentation that could work with it. I simply have not been able to find any low-level documentation that shows how this approach could work. Thank you in advance for any advice, pointers, or links.

Read the article

Help needed with drawRect:

- by Andrew Coad

Hi, I'm having a fundamental issue with use of drawRect: Any advice would be greatly appreciated. The application needs to draw a variety of .png images at different times, sometimes with animation, sometimes without. A design goal that I was hoping to adhere to is to have the code inside drawRect: very simple and "dumb" - i.e. just do drawing and no other application logic. To draw the image I am using the drawAtPoint: method of UIImage. Since this method does not take a CGContext as a parameter, it can only be called within the drawRect: method. So I have: - (void)drawRect:(CGRect)rect { [firstImage drawAtPoint:CGPointMake(firstOffsetX, firstOffsetY)]; } All fine and dandy for one image. To draw multiple images (over time) the approach I have taken is to maintain an array of dictionaries with each dictionary containing an image, the point location to draw at and a flag to enable/suppress drawing for that image. I add dictionaries to the array over time and trigger drawing via the setNeedsDisplay: method of UIView. Use of an array of dictionaries allows me to completely reconstruct the entire display at any time. drawRect: now becomes: - (void)drawRect:(CGRect)rect { for (NSMutableDictionary *imageDict in [self imageDisplayList]) { if ([[imageDict objectForKey:@"needsDisplay"] boolValue]) { [[imageDict objectForKey:@"image"] drawAtPoint:[[imageDict objectForKey:@"location"] CGPointValue]]; [imageDict setValue:[NSNumber numberWithBool:NO] forKey:@"needsDisplay"]; } } } Still OK. The code is simple and compact. Animating this is where I run into problems. The first problem is where do I put the animation code? Do I put it in UIView or UIViewController? If in UIView, do I put it in drawRect: or elsewhere? Because the actual animation depends on the overall state of the application, I would need nested switch statements which, if put in drawRect:, would look something like this: - (void)drawRect:(CGRect)rect { for (NSMutableDictionary *imageDict in [self imageDisplayList]) { if ([[imageDict objectForKey:@"needsDisplay"] boolValue]) { switch ([self currentState]) { case STATE_1: switch ([[imageDict objectForKey:@"animationID"] intValue]) { case ANIMATE_FADE_IN: [self setAlpha:0.0]; [UIView beginAnimations:[[imageDict objectForKey:@"animationID"] intValue] context:nil]; [UIView setAnimationDelegate:self]; [UIView setAnimationCurve:UIViewAnimationCurveEaseIn]; [UIView setAnimationDuration:2]; [self setAlpha:1.0]; break; case ANIMATE_FADE_OUT: [self setAlpha:1.0]; [UIView beginAnimations:[[imageDict objectForKey:@"animationID"] intValue] context:nil]; [UIView setAnimationDelegate:self]; [UIView setAnimationCurve:UIViewAnimationCurveEaseOut]; [UIView setAnimationDuration:2]; [self setAlpha:0.0]; break; case ANIMATE_OTHER: // similar code here break; default: break; } break; case STATE_2: // similar code here break; default: break; } [[imageDict objectForKey:@"image"] drawAtPoint:[[imageDict objectForKey:@"location"] CGPointValue]]; [imageDict setValue:[NSNumber numberWithBool:NO] forKey:@"needsDisplay"]; } } [UIView commitAnimations]; } In addition, to make multiple sequential animations work correctly, there would need to be an outer controlling mechanism involving the animation delegate animationDidStop: callback that would set the needsDisplay entries in the dictionaries to allow/suppress drawing (and animation). The point that we are at now is that it all starts to look very ugly. More specifically: drawRect: starts to bloat quickly and contain code that is not "just drawing" code the UIView needs implicit awareness of the application state the overall process of drawing is now spread across three methods at a minimum And on to the point of this post: how can I do this better? What would the experts out there recommend in terms of overall structure? How can I keep application state information out of the view? Am I looking at this problem from the wrong direction. Is there some completely different approach that I should consider?

Read the article

Unnecessary Java context switches

- by Paul Morrison

I have a network of Java Threads (Flow-Based Programming) communicating via fixed-capacity channels - running under WindowsXP. What we expected, based on our experience with "green" threads (non-preemptive), would be that threads would switch context less often (thus reducing CPU time) if the channels were made bigger. However, we found that increasing channel size does not make any difference to the run time. What seems to be happening is that Java decides to switch threads even though channels aren't full or empty (i.e. even though a thread doesn't have to suspend), which costs CPU time for no apparent advantage. Also changing Thread priorities doesn't make any observable difference. My question is whether there is some way of persuading Java not to make unnecessary context switches, but hold off switching until it is really necessary to switch threads - is there some way of changing Java's dispatching logic? Or is it reacting to something I didn't pay attention to?! Or are there other asynchronism mechanisms, e.g. Thread factories, Runnable(s), maybe even daemons (!). The answer appears to be non-obvious, as so far none of my correspondents has come up with an answer (including most recently two CS profs). Or maybe I'm missing something that's so obvious that people can't imagine my not knowing it... I've added the send and receive code here - not very elegant, but it seems to work...;-) In case you are wondering, I thought the goLock logic in 'send' might be causing the problem, but removing it temporarily didn't make any difference. I have added the code for send and receive... public synchronized Packet receive() { if (isDrained()) { return null; } while (isEmpty()) { try { wait(); } catch (InterruptedException e) { close(); return null; } if (isDrained()) { return null; } } if (isDrained()) { return null; } if (isFull()) { notifyAll(); // notify other components waiting to send } Packet packet = array[receivePtr]; array[receivePtr] = null; receivePtr = (receivePtr + 1) % array.length; //notifyAll(); // only needed if it was full usedSlots--; packet.setOwner(receiver); if (null == packet.getContent()) { traceFuncs("Received null packet"); } else { traceFuncs("Received: " + packet.toString()); } return packet; } synchronized boolean send(final Packet packet, final OutputPort op) { sender = op.sender; if (isClosed()) { return false; } while (isFull()) { try { wait(); } catch (InterruptedException e) { indicateOneSenderClosed(); return false; } sender = op.sender; } if (isClosed()) { return false; } try { receiver.goLock.lockInterruptibly(); } catch (InterruptedException ex) { return false; } try { packet.clearOwner(); array[sendPtr] = packet; sendPtr = (sendPtr + 1) % array.length; usedSlots++; // move this to here if (receiver.getStatus() == StatusValues.DORMANT || receiver.getStatus() == StatusValues.NOT_STARTED) { receiver.activate(); // start or wake up if necessary } else { notifyAll(); // notify receiver // other components waiting to send to this connection may also get // notified, // but this is handled by while statement } sender = null; Component.network.active = true; } finally { receiver.goLock.unlock(); } return true; }

Read the article

Can't get my object to point at the mouse.

- by melignus

I'm using a combination of SDL and OpenGL in a sort of crash course project to teach myself how this all works. I'm really only interested in OpenGL as a way to use acceleration in 2D games so I just need this to work in a 2D plane. I have been having a lot of problems today with my current issue, I would like an object to point towards the mouse while the mouse button is clicked and then of course stay pointing in that direction after the mouse is lifted. void Square::handle_input() { //If a key was pressed if( event.type == SDL_KEYDOWN ) { //Adjust the velocity switch( event.key.keysym.sym ) { case SDLK_UP: upUp = false; yVel = -1; break; case SDLK_DOWN: downUp = false; yVel = 1; break; case SDLK_LEFT: leftUp = false; xVel = -1; break; case SDLK_RIGHT: rightUp = false; xVel = 1; break; case SDLK_w: wUp = false; sAng = 1; break; case SDLK_s: sUp = false; sAng = -1; break; } } //If a key was released else if( event.type == SDL_KEYUP ) { //Adjust the velocity switch( event.key.keysym.sym ) { case SDLK_UP: upUp = true; yVel = 0; break; case SDLK_DOWN: downUp = true; yVel = 0; break; case SDLK_LEFT: leftUp = true; xVel = 0; break; case SDLK_RIGHT: rightUp = true; xVel = 0; break; case SDLK_w: wUp = true; sAng = 0; break; case SDLK_s: sUp = true; sAng = 0; break; } } //If a mouse button was pressed if( event.type == SDL_MOUSEBUTTONDOWN ) { switch ( event.type ) { case SDL_MOUSEBUTTONDOWN: mouseUp = false; mousex == event.button.x; mousey == event.button.y; break; case SDL_MOUSEBUTTONUP: mouseUp = true; break; } } } And then this is called at the end of my Object::Move call which also handles x and y translation if (!mouseUp) { xVect = mousex - x; yVect = mousey - y; radAng = atan2 ( mousey - y, mousex - x ); sAng = radAng * 180 / 3.1415926l; } Right now when I click the object turns and faces down to the bottom left but then no longer changes direction. I'd really appreciate any help I could get here. I'm guessing there might be an issue here with state versus polled events but from all the tutorials that I've been through I was pretty sure I had fixed that. I've just hit a wall and I need some advice!

Read the article

objective-c Novice - Needs help with global variables and setter method

- by user544006

I am creating a quiz app which has 2 views, MMAppViewController and a subview Level1View. I have declared NSInteger property "theScore" in the MMAppViewController view and have synthesised it. In my Level1View when they answer a correct question the "theScore" int will increase by one. The score has to be a global variable because when you reach so many points it will unlock the next level. For some reason in my switch statement it only lets me use the setTheScore method once. I am getting errors for every other set method in the switch statement. Error: "Duplicate label setTheScore". The statement is in the pushButtonAnswer method: setTheScore: theScore++; Here is my code: #import "Level1View.h" #import "MMAppViewController.h" @implementation Level1View @synthesize answer; @synthesize question; @synthesize userAnswer; @synthesize theScore; @synthesize score; int questionNum=0; NSInteger score=0; NSInteger theScore; BOOL start=FALSE; BOOL optionNum=FALSE; -(IBAction)pushBack{ [self dismissModalViewControllerAnimated:YES]; } -(IBAction)pushButton1{ optionNum=TRUE; labelAnswer.textColor=[UIColor blackColor]; userAnswer=@"1"; [labelAnswer setText:(@"You chose 'A'")]; } -(IBAction)pushButton2{ optionNum=TRUE; labelAnswer.textColor=[UIColor blackColor]; userAnswer=@"2"; [labelAnswer setText:(@"You chose 'B'")]; } -(IBAction)pushButton3{ optionNum=TRUE; labelAnswer.textColor=[UIColor blackColor]; userAnswer=@"3"; [labelAnswer setText:(@"You chose 'C'")]; } -(IBAction)pushButtonAnswer{ labelAnswer.textColor=[UIColor blackColor]; switch (questionNum){ case 1: if(answer==userAnswer && optionNum==TRUE){ labelAnswer.textColor=[UIColor greenColor]; [labelAnswer setText:(@"correct")]; [self hideButtons]; score++; [self setTheScore: theScore++]; } else if(optionNum==FALSE){ [labelAnswer setText:(@"Please choose an answer below:")];} else{ labelAnswer.textColor=[UIColor redColor]; [labelAnswer setText:(@"wrong")];} [self hideButtons]; break; case 2: if(answer==userAnswer && optionNum==TRUE){ labelAnswer.textColor=[UIColor greenColor]; [labelAnswer setText:(@"correct")]; [self hideButtons]; score++; [self setTheScore: theScore++]; } else if(optionNum==FALSE){ [labelAnswer setText:(@"Please choose an answer below:")];} else{ labelAnswer.textColor=[UIColor redColor]; [labelAnswer setText:(@"wrong")]; [self hideButtons];} break; case 3: if(answer==userAnswer && optionNum==TRUE){ labelAnswer.textColor=[UIColor greenColor]; .... And #import "MMAppViewController.h" #import "Level1View.h" @implementation MMAppViewController @synthesize theScore; NSInteger score; -(IBAction)pushLevel1{ Level1View *level1View = [[Level1View alloc] initWithNibName:nil bundle:nil]; [self presentModalViewController:level1View animated:YES]; theScore++; } -(IBAction)pushLevel2{ //Level1View *level1View = [[Level1View alloc] initWithNibName:nil bundle:nil]; //[self presentModalViewController:level1View animated:YES]; NSInteger *temp = Level1View.score; //int theScore=2; [labelChoose setText:[NSString stringWithFormat:@"You scored %i", theScore]]; } Does anyone know why i am getting these errors and if I am coding this correctly?

Read the article

How to convert an ORM to its subclass using Hibernate ?

- by Gaaston

Hi everybody, For example, I have two classes : Person and Employee (Employee is a subclass of Person). Person : has a lastname and a firstname. Employee : has also a salary. On the client-side, I have a single HTML form where i can fill the person informations (like lastname and firstname). I also have a "switch" between "Person" and "Employee", and if the switch is on Employee I can fill the salary field. On the server-side, Servlets receive informations from the client and use the Hibernate framework to create/update data to/from the database. The mapping i'm using is a single table for persons and employee, with a discriminator. I don't know how to convert a Person in an Employee. I firstly tried to : load the Person p from the database create an empty Employee e object copy values from p into e set the salary value save e into the database But i couldn't, as I also copy the ID, and so Hibernate told me they where two instanciated ORM with the same id. And I can't cast a Person into an Employee directly, as Person is Employee's superclass. There seems to be a dirty way : delete the person, and create an employee with the same informations, but I don't really like it.. So I'd appreciate any help on that :) Some precisions : The person class : public class Person { protected int id; protected String firstName; protected String lastName; // usual getters and setters } The employee class : public class Employee extends Person { // string for now protected String salary; // usual getters and setters } And in the servlet : // type is the "switch" if(request.getParameter("type").equals("Employee")) { Employee employee = daoPerson.getEmployee(Integer.valueOf(request.getParameter("ID"))); modifyPerson(employee, request); employee.setSalary(request.getParameter("salary")); daoPerson.save(employee ); } else { Person person = daoPerson.getPerson(Integer.valueOf(request.getParameter("ID"))); modifyPerson(employee, request); daoPerson.save(person); } And finally, the loading (in the dao) : public Contact getPerson(int ID){ Session session = HibernateSessionFactory.getSession(); Person p = (Person) session.load(Person.class, new Integer(ID)); return p; } public Contact getEmployee(int ID){ Session session = HibernateSessionFactory.getSession(); Employee = (Employee) session.load(Employee.class, new Integer(ID)); return p; } With this, i'm getting a ClassCastException when trying to load a Person using getEmployee. XML Hibernate mapping : <class name="domain.Person" table="PERSON" discriminator-value="P"> <id name="id" type="int"> <column name="ID" /> <generator class="native" /> </id> <discriminator column="type" type="character"/> <property name="firstName" type="java.lang.String"> <column name="FIRSTNAME" /> </property> <property name="lastName" type="java.lang.String"> <column name="LASTNAME" /> </property> <subclass name="domain.Employee" discriminator-value="E"> <property name="salary" column="SALARY" type="java.lang.String" /> </subclass> </class> Is it clear enough ? :-/

Read the article

PHP Frontpage/Page controller

- by atno

I using the following as Frontpage/Page Controller(s) and it's working ok so far, except two problems I'm facing which as you can see are the $pages array and the switch, which are actually much much longer as the one I've pasted here. Everytime there is a need for a new page controller I have to add it to $pages array and to switch which makes that list very long. How would you overcome this problem and do you see any other improvement on this code? loadLogic() in page controllers it is used to get functions under pages/controllername/logic/function.php. Frontpage Controller - index.php: include 'common/common.php'; if(!isset($_GET['p']) OR $_GET['p'] == ''){ $_GET['p'] = 'home'; header('Location: index.php?p=home'); } $pages = array('home','register','login','logout','page1','page2','page3'); $_GET['p'] = trim($_GET['p']); if(isset($_GET['p'])){ if(in_array($_GET['p'], $pages)){ switch ($_GET['p']) { case 'home': include 'home.php'; break; case 'register': include 'register.php'; break; case 'login': include 'login.php'; break; case 'logout': include 'logout.php'; break; case 'page1': include 'page1.php'; break; case 'page2': include 'page2.php'; break; case 'page3': include 'page3.php'; break; } }else{ echo '404!'; } } Page Controller - {home,register,login,logout,page1,page2,page3}.php: include 'tpl/common/header.php'; contentStart(); if(isset($_SESSION['logged'])){ loadLogic('dashboard'); }else{ loadLogic('nologin'); } //Display login form in logic page instead links // if(!isset($_SESSION['logged'])){ contentEnd(); loadLogic('nologinForm'); }else{ contentEnd(); include'tpl/common/rcol.php'; } include 'tpl/common/footer.php'; function loadLogic(): function loadLogic($logic) { $path = dirname(__DIR__) . '/pages'; $controller = preg_split('/&/',$_SERVER['QUERY_STRING']); $controller = trim($controller[0],"p="); $logicPath = 'logic'; $logic = $logic . '.php'; $err = 0; $logicFullPath = $path.'/'.$controller.'/'.$logicPath.'/'.$logic; if($err == '0'){ include "$logicFullPath"; } } Folder Structure: projectName | ---> common | ---> pages | | | --->home | | | --->register | | | --->login | | | --->logout | | | --->page1 | | | --->page2 | | | --->page3 | ---> tpl | | | ---> common | --> home.php | --> register.php | --> login.php | --> logout.php | --> page1.php | --> page2.php | --> page3.php

Read the article

"didChangeSection:" NSfetchedResultsController delegate method not being called

- by robenk

I have a standard split view controller, with a detail view and a table view. Pressing a button in the detail view can cause the an object to change its placement in the table view's ordering. This works fine, as long as the resulting ordering change doesn't result in a section being added or removed. I.e. an object can change it's ordering in a section or switch from one section to another. Those ordering changes work correctly without problems. But, if the object tries to move to a section that doesn't exist yet, or is the last object to leave a section (therefore requiring the section its leaving to be removed), then the application crashes. NSFetchedResultsControllerDelegate has methods to handle sections being added and removed that should be called in those cases. But those delegate methods aren't being called for some reason. The code in question, is boilerplate: - (void)controllerWillChangeContent:(NSFetchedResultsController *)controller { NSLog(@"willChangeContent"); [self.tableView beginUpdates]; } - (void)controller:(NSFetchedResultsController *)controller didChangeSection:(id <NSFetchedResultsSectionInfo>)sectionInfo atIndex:(NSUInteger)sectionIndex forChangeType:(NSFetchedResultsChangeType)type { NSLog(@"didChangeSection"); switch(type) { case NSFetchedResultsChangeInsert: [self.tableView insertSections:[NSIndexSet indexSetWithIndex:sectionIndex] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeDelete: [self.tableView deleteSections:[NSIndexSet indexSetWithIndex:sectionIndex] withRowAnimation:UITableViewRowAnimationFade]; break; } } - (void)controller:(NSFetchedResultsController *)controller didChangeObject:(id)anObject atIndexPath:(NSIndexPath *)indexPath forChangeType:(NSFetchedResultsChangeType)type newIndexPath:(NSIndexPath *)newIndexPath { NSLog(@"didChangeObject"); UITableView *tableView = self.tableView; switch(type) { case NSFetchedResultsChangeInsert: [tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:newIndexPath] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeDelete: [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; break; case NSFetchedResultsChangeUpdate: [self configureCell:[tableView cellForRowAtIndexPath:indexPath] atIndexPath:indexPath]; break; case NSFetchedResultsChangeMove: [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade]; [tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:newIndexPath]withRowAnimation:UITableViewRowAnimationFade]; break; } } - (void)controllerDidChangeContent:(NSFetchedResultsController *)controller { NSLog(@"didChangeContent"); [self.tableView endUpdates]; [detailViewController.reminderView update]; } Starting the application, and then causing the last object to leave a section results in the following output: 2011-01-08 23:40:18.910 Reminders[54647:207] willChangeContent 2011-01-08 23:40:18.912 Reminders[54647:207] didChangeObject 2011-01-08 23:40:18.914 Reminders[54647:207] didChangeContent 2011-01-08 23:40:18.915 Reminders[54647:207] *** Assertion failure in -[UITableView _endCellAnimationsWithContext:], /SourceCache/UIKit_Sim/UIKit-1145.66/UITableView.m:825 2011-01-08 23:40:18.917 Reminders[54647:207] Serious application error. Exception was caught during Core Data change processing: Invalid update: invalid number of sections. The number of sections contained in the table view after the update (5) must be equal to the number of sections contained in the table view before the update (6), plus or minus the number of sections inserted or deleted (0 inserted, 0 deleted). with userInfo (null) As you can see, "willChangeContent", "didChangeObject" (moving the object in question), and "didChangeContent" were all called properly. Based on the Apple's NSFetchedResultsControllerDelegate documentation "didChangeSection" should have been called before "didChangeObject", which would have prevented the exception causing the crash. So I guess the question is how do I assure that didChangeSection gets called? Thanks in advance for any help!

Read the article

How can I modify my Shunting-Yard Algorithm so it accepts unary operators?

- by KingNestor

I've been working on implementing the Shunting-Yard Algorithm in JavaScript for class. Here is my work so far: var userInput = prompt("Enter in a mathematical expression:"); var postFix = InfixToPostfix(userInput); var result = EvaluateExpression(postFix); document.write("Infix: " + userInput + "<br/>"); document.write("Postfix (RPN): " + postFix + "<br/>"); document.write("Result: " + result + "<br/>"); function EvaluateExpression(expression) { var tokens = expression.split(/([0-9]+|[*+-\/()])/); var evalStack = []; while (tokens.length != 0) { var currentToken = tokens.shift(); if (isNumber(currentToken)) { evalStack.push(currentToken); } else if (isOperator(currentToken)) { var operand1 = evalStack.pop(); var operand2 = evalStack.pop(); var result = PerformOperation(parseInt(operand1), parseInt(operand2), currentToken); evalStack.push(result); } } return evalStack.pop(); } function PerformOperation(operand1, operand2, operator) { switch(operator) { case '+': return operand1 + operand2; case '-': return operand1 - operand2; case '*': return operand1 * operand2; case '/': return operand1 / operand2; default: return; } } function InfixToPostfix(expression) { var tokens = expression.split(/([0-9]+|[*+-\/()])/); var outputQueue = []; var operatorStack = []; while (tokens.length != 0) { var currentToken = tokens.shift(); if (isNumber(currentToken)) { outputQueue.push(currentToken); } else if (isOperator(currentToken)) { while ((getAssociativity(currentToken) == 'left' && getPrecedence(currentToken) <= getPrecedence(operatorStack[operatorStack.length-1])) || (getAssociativity(currentToken) == 'right' && getPrecedence(currentToken) < getPrecedence(operatorStack[operatorStack.length-1]))) { outputQueue.push(operatorStack.pop()) } operatorStack.push(currentToken); } else if (currentToken == '(') { operatorStack.push(currentToken); } else if (currentToken == ')') { while (operatorStack[operatorStack.length-1] != '(') { if (operatorStack.length == 0) throw("Parenthesis balancing error! Shame on you!"); outputQueue.push(operatorStack.pop()); } operatorStack.pop(); } } while (operatorStack.length != 0) { if (!operatorStack[operatorStack.length-1].match(/([()])/)) outputQueue.push(operatorStack.pop()); else throw("Parenthesis balancing error! Shame on you!"); } return outputQueue.join(" "); } function isOperator(token) { if (!token.match(/([*+-\/])/)) return false; else return true; } function isNumber(token) { if (!token.match(/([0-9]+)/)) return false; else return true; } function getPrecedence(token) { switch (token) { case '^': return 9; case '*': case '/': case '%': return 8; case '+': case '-': return 6; default: return -1; } } function getAssociativity(token) { switch(token) { case '+': case '-': case '*': case '/': return 'left'; case '^': return 'right'; } } It works fine so far. If I give it: ((5+3) * 8) It will output: Infix: ((5+3) * 8) Postfix (RPN): 5 3 + 8 * Result: 64 However, I'm struggling with implementing the unary operators so I could do something like: ((-5+3) * 8) What would be the best way to implement unary operators (negation, etc)? Also, does anyone have any suggestions for handling floating point numbers as well? One last thing, if anyone sees me doing anything weird in JavaScript let me know. This is my first JavaScript program and I'm not used to it yet.

Read the article

Iphone: controlling text with delay problem with UIWebView

- by James B.

Hi, I've opted to use UIWebView so I can control the layout of text I've got contained in a local html document in my bundle. I want the text to display within a UIWebView I've got contained within my view. So the text isn't the whole view, just part of it. Everything runs fine, but when the web page loads I get a blank screen for a second before the text appears. This looks really bad. can anyone give me an example of how to stop this happening? I'm assuming I have to somehow hide the web view until it has fully loaded? Could someone one tell me how to do this? At the moment I'm calling my code through the viewDidLoad like this: [myUIWebView loadRequest: [NSURLRequest requestWithURL:[NSURL fileURLWithPath:[[NSBundle mainBundle]pathForResource:@"localwebpage" ofType:@"html"] isDirectory:NO]]]; Any help is much appreciated. I've read round a few forums and not seen a good answer to this question, and it seems like it recurs a lot as an issue for beginners like myself. Thanks for taking the time to read this post! UPDATED info Thanks for your response. The suggestions below solves the problem but creates a new one for me as now when my view loads it is totally hidden until I click on my toggle switch. to understand this it's maybe most helpful if I post all my code. Before this though let me explain the setup of my view. I've got a standard view within which I've also got two web views, one on top of the other. each web view contains different text with different styling. the user flicks between views using a toggle switch, which hides/reveals the web views. I'm using the web views because I want to control the style/layout of the text. Below is my full .m code, I can't figure out where it's going wrong. My web views are called oxford & harvard I'm sure its something to do with how/when I'm hiding/revealing views. I've played around with this but can't seem to get it right. Maybe my approach is wrong. A bit of advice ironing this out would be really appreciated: @implementation ReferenceViewController @synthesize oxford; @synthesize harvard; // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; [oxford loadRequest: [NSURLRequest requestWithURL:[NSURL fileURLWithPath:[[NSBundle mainBundle]pathForResource:@"Oxford" ofType:@"html"] isDirectory:NO]]]; [harvard loadRequest: [NSURLRequest requestWithURL:[NSURL fileURLWithPath:[[NSBundle mainBundle]pathForResource:@"Harvard" ofType:@"html"] isDirectory:NO]]]; [oxford setHidden:YES]; [harvard setHidden:YES]; } - (void)webViewDidFinishLoad:(UIWebView *)webView { if([webView hidden]) { [oxford setHidden:NO]; [harvard setHidden:NO]; } } //Toggle controls for toggle switch in UIView to swap between webviews - (IBAction)toggleControls:(id)sender { if ([sender selectedSegmentIndex] == kSwitchesSegmentIndex) { oxford.hidden = NO; harvard.hidden = YES; } else { oxford.hidden = YES; harvard.hidden = NO; } } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [super dealloc]; [oxford release]; [harvard release]; } @end

Read the article

Looking for suggestions on how to reuse AlertDialogs to confirm actions of contextual menus on the items of an ActivityList

- by Ozone

I use a ListActivity to display a list of items. The user can long-press an item in the list to display a contextual menu. This menu contains among other things an option to delete the long-pressed item. When the user selects this option, a dialog pops up asking for confirmation of the deletion. Upon confirmation, the item is deleted from the list. I would like to reuse the AlertDialog as much as possible. My attempts at using onPrepareDialog(int, View, Bundle) have been defeated by the fact that the Bundle is not passed to the DialogInterface.OnClickListener. I end up having to recreate a listener on every invocation. I see several ways to solve this: recreate the dialog on every occasion (pros: simple, cons: wasteful) keep the DialogInterface.OnClickListener in a field on the ListActivity and keep the item to be deleted as a field of the listener. (pros: no memory waste, cons: need to manage state). Q: is this safe? have onPrepareDialog update the title, and bind new View.OnClickListeners on the buttons of the AlertDialog. (pros: limit waste, cons: new View.OnClickListener on every invocation). If DialogInterface.OnClickListener accepted a Bundle, I wouldn't have to jump through hoops to keep track of the item being deleted. This is not a blocker, but I would love to see an elegant solution. I would love to hear your suggestions :) Here is the code for option #1, if you want to play with this: public class Example extends ListActivity { private static final int CONFIRM_DELETE_DIALOG = 1; private static final String POSITION_KEY = "position"; private ArrayAdapter<String> mAdapter; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); mAdapter = new ArrayAdapter<String>( this, android.R.layout.simple_list_item_1, new String[] { "one", "two" }); setListAdapter(mAdapter); registerForContextMenu(getListView()); } @Override public void onCreateContextMenu(ContextMenu menu, View v, ContextMenuInfo menuInfo) { super.onCreateContextMenu(menu, v, menuInfo); getMenuInflater().inflate(R.menu.my_lovely_menu, menu); } @Override public boolean onContextItemSelected(MenuItem item) { AdapterContextMenuInfo info = (AdapterContextMenuInfo) item.getMenuInfo(); switch (item.getItemId()) { case R.id.delete_item: Bundle bundle = new Bundle(); bundle.putInt(POSITION_KEY, info.position); showDialog(CONFIRM_DELETE_DIALOG, bundle); return true; default: return super.onContextItemSelected(item); } } @Override protected Dialog onCreateDialog(int id, Bundle args) { switch (id) { case CONFIRM_DELETE_DIALOG: final int position = args.getInt(POSITION_KEY); AlertDialog.Builder builder = new AlertDialog.Builder(); builder.setCancelable(false); builder.setTitle(String.format( getString(R.string.confirm_delete), mAdapter.getItem(position))); DialogInterface.OnClickListener listener = new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int which) { switch (which) { case DialogInterface.BUTTON_POSITIVE: mAdapter.remove(mAdapter.getItem(position)); // Dismiss the dialog to ensure OnDismissListeners are notified. dialog.dismiss(); break; case DialogInterface.BUTTON_NEGATIVE: // Cancel the dialog to ensure OnCancelListeners are notified. dialog.cancel(); break; } // Remove the dialog so it is re-created next time it is required. removeDialog(CONFIRM_DELETE_DIALOG); } }; builder.setPositiveButton(android.R.string.yes, listener); builder.setNegativeButton(android.R.string.no, listener); return builder.create(); default: return super.onCreateDialog(id, args); } } }

Read the article

iphone keyboard won't appear

- by d_CFO

I can click on the field, and it momentarily turns blue, but those events plus makeFirstResponder together do not cause the keyboard to show on a UITextField. Plain vanilla code follows; I include it so others can discern what is NOT there and therefore what, presumably, with solve the problem. I put in leading spaces to format this question more like code, but the parser seems to have stripped them, thus leaving left-justified code. Sorry! UITextFieldDelete, check: @interface RevenueViewController : UIViewController <UITableViewDelegate, UITableViewDataSource, UITextFieldDelegate> { UILabel *sgmntdControlLabel; UISegmentedControl *sgmntdControl; UITableView *theTableView; } @property(nonatomic,retain) UISegmentedControl *sgmntdControl; @property(nonatomic,retain) UILabel *sgmntdControlLabel; Delegate and source, check. -(void)loadView; // code CGRect frameTable = CGRectMake(10,0,300,260); theTableView = [[UITableView alloc] initWithFrame:frameTable style:UITableViewStyleGrouped]; [theTableView setDelegate:self]; [theTableView setDataSource:self]; // code [self.view addSubview:theTableView]; [super viewDidLoad]; } Insert UITextField to cell, check. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { NSInteger sectionNmbr = [indexPath section]; NSInteger rowNmbr = [indexPath row]; NSLog(@"cellForRowAtIndexPath=%d, %d",sectionNmbr,rowNmbr); static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; } // Configure the cell. switch (sectionNmbr) { case 0: if (rowNmbr == 0) { cell.tag = 1; cell.textLabel.text = @"Label for sctn 0, row 0"; UITextField *tf = [[UITextField alloc] init]; tf.keyboardType = UIKeyboardTypeNumberPad; tf.returnKeyType = UIReturnKeyDone; tf.delegate = self; [cell.contentView addSubview:tf]; } if (rowNmbr == 1) { cell.tag = 2; cell.textLabel.text = @"Label for sctn 0, row 1"; cell.accessoryType = UITableViewCellAccessoryDetailDisclosureButton; } break; } } Successfully end up where we want to be (?), no check, (and no keyboard!): - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSLog(@"didSelectRowAtIndexPath"); switch (indexPath.section) { case 0: NSLog(@" section=0, rowNmbr=%d",indexPath.row); switch (indexPath.row) { case 0: UITableViewCell *cellSelected = [tableView cellForRowAtIndexPath: indexPath]; UITextField *textField = [[cellSelected.contentView subviews] objectAtIndex: 0]; [ textField setEnabled: YES ]; [textField becomeFirstResponder]; // here is where keyboard will appear? [tableView deselectRowAtIndexPath: indexPath animated: NO]; break; case 1: // code break; default: break; } break; case 1: // code break; default: // handle otherwise un-handled exception break; } } Thank you for your insights!

Read the article

CodePlex Daily Summary for Thursday, April 29, 2010

CodePlex Daily Summary for Thursday, April 29, 2010New ProjectsDesign Technology Laboratory: DTL project is prominent.Em-Lib: Electronic Music Library เป็นโปรแกรมที่พัฒนาขึ้นเพื่อให้เป็นห้องสมุดอิเล็กทรอนิกส์ โดยตัวโปรแกรมจะสามารถจำลองเครื่องดนตรี พร้อมข้อมูลที่เกี่ย...Extensions For ASP.NET: Extensions For ASP.NETFIM 2010 PowerShell Cmdlets: These PowerShell cmdlets let you manage objects in the Forefront Identity Manager 2010 web service easily and concisely. The five cmdlets let you e...Grunty OS: Grunty OS is a Free open source OS made my GruntXproductionsIrishDevelopers.net Test: IrishDevelopers.net TestJobping Url Shortener: MVC 2 project that Shortens urls Fully functioning 'bare bones' url shortening website. Just 1 page to create and display the short url. 'API' ...Made In Hell: Small console game. Just a training in code writings.manx: manx is a system for managing catalogs of technical documents. The system was created to handle the needs of the vintage computing community with ...ntn: playing around with new featuresOpen Bitrac: Bitrac is ASP.NET Blog SystemOpenNETCF.WindowsMobile.Ink: The Mobile Ink Library is a .NET component that provides support for the new Windows Mobile 6 WISP Lite API in your .NET Compact Framework applicat...Proxy Switch: Proxy switch is a program which allows the user to easily switch between a configured proxy server and a home network. The program is developed in ...Samcrypt: .Seoftware Evoluion Repository Mining: Project for mining data about develpoment effort from svn repository.SharePoint 2010 Bulk Document Importer: Need to import/migrate files and folders from servers and network shares into SharePoint 2010 document libraries? This free commandline application...SL2 - A Scala interpreter for L2: A simple L2 Interpreter. Just a project for a class.sMAPedit: -SocialCare: SocialCare - Team EUSOCIALSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: Unique in database comparison, SDF lets you compare live data--or saved snapshots--from any combination of SQL Server, Oracle, MySql, or ODBC data ...Yasminuroban: Yasminuroban is an open source "Sokoban" (aka "Warehouse Keeper" or "Boxes") alike game totally written in DHTML (JavaScript, CSS and HTML) that us...Хрень для ао: Test project to implement Bot.New ReleasesAntySpam Microsoft Outlook Plugin: AntySpam Microsoft Outlook 2010 Plugin v.2.0.1: this release only tested on MS Outlook 2010 version: 14.0.4536.1000 (32-bit and 64-bit) part of Microsoft Office Professional Plus 2010. Source pro...AppFabric Caching Admin Tool: AppFabric Caching Admin Tool 1.2: System Requirements:.NET 4.0 RC AppFabric Caching Beta2 Refresh Test On:Win 7 (64x) Note: Must run as Administrator !!!AutoSPInstaller: Powershell script to pre-download prerequisites: This script will download all files required by Prerequisiteinstaller.exe in advance, in order to support an 'offline' installation of SharePoint 2...BeanProxy: BeanProxy 2.5: BeanProxy is a C# (.NET 3.5) library housing classes that facilitates unit testing. Any non-static, public interface/class/or abstract class can be...Bluetooth Radar: Verison 2.2.1: Please follow this link for the latest release - http://bluetoothradar.codeplex.com/releases/view/44232CSS 360 Planetary Calendar: LCA: Upload your LCA ppt pieces here. Then someone can merge them together.DeskNotes: DeskNotes 2.1.2: Version in development which features following improvements over DeskNotes 2.1.1: Each DeskNote can be made switchable between other windows on Wi...DotNetNuke Russian Language packs: Core Russian Language Pack for DNN 05.04.01: Core Russian Resource Language Pack for DNN 05.04.01 Русский языковый пакет для DNN 05.04.01DotNetNuke® Community Edition: 05.04.01: Major Highlights Fixed issue with assembly version type. Fixed issue with multiple cancel buttons on Add User screen. Fixed issue with ve...Event Scavenger: Version 3.2: Tweaked the import foreign logs functionality. Set version to 3.2 for Admin tool, service and database. Viewer unaffected.Event Scavenger: Version 3.2 stable: Update viewer version to 3.2 for consistency. Minor changes for rest.Event Scavenger: Version 3.2.2: Added setting to enable/disable creation of historic data.FIM 2010 PowerShell Cmdlets: Initial Release of FIM 2010 PowerShell Cmdlets: Initial release of FIM 2010 PowerShell cmdlets based on open source FIM web service client. Install by running installutil on Quest.FIMPowerhellSna...Fix.ly: Fix.ly 0.2: Fixed a bug where non-verbose mode would not workJobping Url Shortener: Deployment Code v0.1: Contains only the files necessary to run the Url Shortener website. Just provide a valid connection string in the web.configMetabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.1: This is the release of the Metabolite Enterprise Libraries 1.1 for use with EPiServer 5 R2 SP2 and Page Type Builder 1.1. If you want to get the s...Metabolite Enterprise Libraries for EPiServer CMS using Page Type Builder: Metabolite Enterprise Libraries 1.1 (source): This is the source code release of the Metabolite Enterprise Libraries 1.1 for use with EPiServer 5 R2 SP2 and Page Type Builder 1.1.MVC Music Store: MVC Music Store v0.8: This is the initial release of the MVC Music Store Tutorial. Download contains source and a tutorial document in PDF format.MyWSAT - ASP.NET Membership Administration Tool: MyWSAT v3.5.2: MyWSAT 3.5.2 Update Notes - April 28th 2010 1.) Fixed theme engine for administration area. Now I can create theme packages to make them available ...N2 CMS: 2.0 rc2: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes (1.5 -> 2.0 release candid...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.122: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version signi...nRoute Framework: nRoute.Toolkit Release Version 0.4.5: Release Targets, Silverlight and WPF: - Targets Silverlight 4 for Web - Targets WPF in .NET 4 for Desktop nRoute Dependencies: - System.Windows...NSIS Autorun: NSIS Autorun 0.1.4: NSIS Autorun 0.1.4 This release includes source code, application binary, and example materials.OpenNETCF.WindowsMobile.Ink: Initial Release: This is the source as originally hosted in the OpenNETCF SVN server.Resharper Settings Manager: RSM v2.1: Warning! The 'Load Settings File...' menu item won't show up in VS 2008. Will release an update soon. ChangesReworked plug-in options UI: Split RSM...RoTwee: RoTwee (11.1.0.0): Rotation is improved from 11.0.0.3.SharePoint 2010 Bulk Document Importer: SharePoint 2010 Bulk Document Importer 1.0.0.0: Features in 1.0.0.0 Command line interface Import folders and files with all subfolders Can be run from outside the SharePoint Server. Every a...sMAPedit: sMAPedit v0.6 (Base): + base version containing the applicaion & html resourcesSocialCare: SocialCare_src: Codigo Fonte da Aplicação e Banco de DadosTFS Code Comment Checking Policy (CCCP): CCCP 4.0 for VS2010: This release installs side-by-side with CCCP 3.0 for VS2008 SP1.VCC: Latest build, v2.1.30428.0: Automatic drop of latest buildVCC: Latest build, v2.1.30428.1: Automatic drop of latest buildVCC: Latest build, v2.1.30428.2: Automatic drop of latest buildХрень для ао: Первый релиз: Пробую что это такое.Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibrarySilverlight ToolkitMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)ASP.NETiTuner - The iTunes CompanionMicrosoft SQL Server Community & SamplesMost Active Projectspatterns & practices – Enterprise LibraryRawrHydroServer - CUAHSI Hydrologic Information System ServerIonics Isapi Rewrite FilterGMap.NET - Great Maps for Windows Forms & PresentationNB_Store - Free DotNetNuke Ecommerce Catalog ModuleParticle Plot PivotSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesN2 CMSBlogEngine.NET

Read the article

bluetooth not working on Ubuntu 13.10

- by iacopo

I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

Search Results

Search found 10207 results on 409 pages for 'ethernet switch'.

Page 139/409 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146 | Next Page >

- by Zeophlite

- by buecking

- by user58859

- by phooze

- by lurscher

- by Anadi Misra

- by user1471995

- by AlReece45

- by Tegeril

- by rupesh

- by Xcelled194

- by Ryan Smyth

- by Andrew Coad

- by Paul Morrison

- by melignus

- by user544006

- by Gaaston

- by atno

- by robenk

- by KingNestor

- by James B.

- by Ozone

- by d_CFO

- by iacopo

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146 | Next Page >