Search Results

Search found 5148 results on 206 pages for 'preconference programs'.

Page 139/206 | < Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >

• Is there supposed to be a Windows Network folder in the file manager?

  - by Cindy

  I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? Original question First of all I just want to say, I wish I had tried Ubuntu a couple years ago when I first heard about it, but I was like a lot of the population and went with the "easy way" and stuck with Windows because I didn't want to take the time to learn something new. Well, about 3 months ago I realized someone had hacked into my computer, and then found they had hacked my facebook account so I decided I had better do a complete credit check. I found student loans (totalling about 30,000 so far) had recently showed up on my credit report. I think it's going to be a long, long road to recovery now but I'm hoping Ubuntu will be a start and definitely an eye opener. My relationship with Windows is over. I had 3 antivirus programs running, none were protecting me like I thought they were. Turned out a free program that I downloaded was the only one that could detect and clean the virus, but by then it was too late. Anyhow, my question is, I pulled my hard drive out of my computer and started with a bootable usb version of Ubuntu, which I am using that at this point. At first boot, I see that there is a Windows folder when browsing network. Since there is no operating system present, besides the usb that I boot from, should there be a Windows network folder? I am using a local ISP (and won't be much longer because I am very paranoid at this point) and I want to make sure all is ok before I put my new hard drive in and install Ubuntu. Any help would be appreciated. Also, I want to thank Ubuntu and the community for giving people an alternative.

  Read the article

• Can I set up samba so it automatically allows all the local usernames and passwords?

  - by dialer

  I have set up samba like this (this is the complete smb.conf): [global] log file = /var/log/samba/log log level = 2 security = user [homes] browsable = false read only = no valid users = %S I'd like to enable every user on server to access their home directories, but for some unknown reason only my 'administrator' account can do so. (I have done that with ftp before, but now smb is also needed). When I try to smbclient -L localhost -U [user], I get NT_STATUS_LOGON_FAILURE, except with the administrator (which is the user created during the ubuntu installation, not root). The samba log file says NT_STATUS_NO_SUCH_USER: [2012/04/04 20:26:02.081454, 2] smbd/reply.c:554(reply_special) netbios connect: name1=LOCALHOST 0x20 name2=DIALER-X 0x0 [2012/04/04 20:26:02.081733, 2] smbd/reply.c:565(reply_special) netbios connect: local=localhost remote=dialer-x, name type = 0 [2012/04/04 20:26:02.087200, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [public] - [public] FAILED with error NT_STATUS_NO_SUCH_USER I suspect that I have to manually create samba users, but the man pages state that If the client has passed a username/password pair and that username/password pair is validated by the UNIX system's password programs, the connection is made as that username. To me that sounds like as long as the provided username/password is a valid login on the server, it should work. Am I missing something totally obvious? I don't want / can't afford to manually update the samba users and passwords to match the server's. 11.10

  Read the article

• what to learn & practice to be a programmer (not for Job) [closed]

  - by Hanan N.

  I want to be able to write programs (tools) for my own needs, and I want to tell the computer what to do, not to be strict to what other's told it to do. I have a good knowledge of Linux & Windows, I am also have a bit of Python in my head, but I think that I need some guidance on what languages or practices to invest my time into in order to be able to tell the computer what to do. I know there is a lot of posts similar to what I am asking here, but there is a big difference and so I have opened this thread. My goal isn't to work at a company, so I don't need to learn how to work as a team, I don't need to learn as much how to maintain my code nor how to write it nice for others to understand (I know it is important but not for me). I don't want to learn it as a profession, but as a serious hobby (you can call it hacking as long as you know what cracking means), my end goal is to be able to understand other's people code, and to write my own code with a lot of deep knowledge of the ins and outs of the computer system in order to gain from it as much as I can. So in essence my questions are: How can I understand, in depth, computers, in order to exploit them as much as I can? What should I learn? Are there any books that I should read? Is it possible to do this, or do I have to learn every aspect of programming?

  Read the article

• Any benefit of /home Ubuntu partition

  - by nightcrawler

  I want to have dual OS of Win8 & Ubuntu 12.10. Provided that Ubuntu can access ntfs partition of Windows but same can't be said about Windows this leads to a question mark on the significance of having /home partition while installing Ubuntu. As far as I know /swap & / are the two partitions directly used by Ubuntu to store programs, installation & stuff while the documents/media resides in /home. Now because Ubuntu releases are more frequent than Windows & updates needs backup & relate stuff, so I came to decision to not to use /home at all, rather keep all my documents/media in ntfs, which would be untouched while upgrading Ubuntu as Win updates are once in a decade! Is my thinking correct? If yes, what would be the minimum space I should allot to /home plus how much I should allot to / one must know that I plan to use heavy applications like Maple, Matlab & Sagemath on Ubuntu.

  Read the article

• How to Disable Touchpad tap in Toshiba Tecra R850 in Oneiric - it is recognized as a PS/2 mouse

  - by Kibi

  I know there's a lot of similar questions, but nothing I have tried here works yet - perhaps I was doing it wrong. New Laptop - Toshiba Tecra R850 with an install of Oneiric 64 bit. Mostly things are working well, but I have a problem with the touchpad (or whatever it's called) - whenever I use it for moving the mouse pointer I accidentally tap on it - basically I am clicking all over the place by accident. So I want to disable the tap-as-click (after all, I have buttons for clicks too). I open up "Mouse and Touchpad" and on the Touchpad tab I check "Disable touchpad when typing" and UNcheck "Enable mouse clicks with touchpad". This does not achieve anything. Ditto Synaptiks and other similar tools. EDIT OK it turns out that this is a somewhat known problem - it seems the touchpad is not being recognized as a touchpad, it is seen as a PS/2 mouse. So any adjustments made with various settings programs to the "touchpad" don't affect it. I've been looking at solutions for getting the touchpad correctly recognized and not achieved it yet - seems there is a problem at the kernel level...I tried (foolishly) a suggestion to replace the psmouse.ko driver ...this screwed some stuff up and didn't solve my problem. So - anyone know an answer? Thanks Kibi

  Read the article

• Installing Windows from Ubuntu while booting only from the hard drive

  - by WindowsEscapist

  My problem is unrelated to this workaround (the question) here, but the end result is that I cannot change boot order (or use a boot menu) on my laptop. It is currently running Ubuntu 12.04 with a dual-boot to Fedora if anything goes catastrophically wrong with Ubuntu (read "if I mess it up"). I would really like to install Windows 7 (but XP would be fine) on an empty FAT32 partition I have already made because of issues with WINE-emulated programs running more slowly than under Windows. The problem is, I can only boot from my hard drive. I can boot from other devices by removing the hard drive, but this is irrelevant because SATA is non-hotpluggable (I can't plug it back in to install). Is there any way I could boot up a Windows installer CD (or other CDs)? (I know how to keep my Linux distros.) I have both the .iso's and the physical CDs (or can obtain them). This may be unneeded, but just as a disclaimer this is completely legal. The computer belongs to me, I have admin privs, etc. I'm not doing anything shady!

  Read the article

• python2.7 help() modules returnd error

  - by GerberaH

  # python Python 2.7.3 (default, Aug 1 2012, 05:14:39) [GCC 4.6.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> help() Welcome to Python 2.7! This is the online help utility. If this is your first time using Python, you should definitely check out the tutorial on the Internet at http://docs.python.org/tutorial/. Enter the name of any module, keyword, or topic to get help on writing Python programs and using Python modules. To quit this help utility and return to the interpreter, just type "quit". To get a list of available modules, keywords, or topics, type "modules", "keywords", or "topics". Each module also comes with a one-line summary of what it does; to list the modules whose summaries contain a given word such as "spam", type "modules spam". help> modules Please wait a moment while I gather a list of all available modules... /usr/lib/python2.7/dist-packages/gobject/constants.py:24: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed import gobject._gobject /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:40: Warning: g_boxed_type_register_static: assertion `g_type_from_name (name) == 0' failed from gtk import _gtk ** (python:6240): CRITICAL **: pyg_register_boxed: assertion `boxed_type != 0' failed /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:40: Warning: cannot register existing type `GdkDevice' from gtk import _gtk /usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:40: Warning: g_type_get_qdata: assertion `node != NULL' failed from gtk import _gtk Speicherzugriffsfehler (Speicherabzug geschrieben)

  Read the article

• Ubuntu automatic logout whenever I execute exe files

  - by KeepTrying

  I have a problem. Here's the thing. There were 4 partitions in my hard drive: One for ubuntu root folder One for ubuntu home folder One for general stuffs like music, movies... And the last one for SWAP To install Windows 7, I resized partitions and moving the order of partitions by using GParted. I moved all of the ext formatted partitions to the left, so that means the spare space would be at the right. And I formatted that spare space in NTFS and install windows 7. After successfully installing windows 7, I used LiveUSB to fix grub. I installed Boot Repair and, with just one click, now I can dual boot ubuntu and windows 7. But, the point, because of changing the order of partitions, especially the partition consisting of home folder, I couldn't log in the ubuntu. I used recovery mode and changed file /etc/passwd. Everything almost got back to normal except one thing. The windows apps that I installed via wine don't work anymore. I run them via accessing menu Applications/Wine/Programs but nothing loads. One more thing, when I double click on exe files to run them, ubuntu suddenly log outs. Thank you for reading my post, it's quite long and my English is fairly poor. I'd appreciate for anyone who reads it.

  Read the article

• Would having an undergraduate certificate in Computer Science help me get employed as a computer programmer? [on hold]

  - by JDneverSleeps

  I am wondering how would employers perceive the Universtiy Certificate in Computing and Information Systems offered by Athabasca University (a distance education institution... The university is legit and accredited by the Government of Alberta, Canada). I already have a BSc in Statistics from University of Alberta (a classic brick and mortar public university in Alberta, Canada)...so I can state in my resume that I have a "university degree"..... Luckily, I was able to secure a very good employment in my field after the graduation from the U of A. The main reason why I am interested in taking the certificate program through Athabasca is because knowing how to program can increase the chance for promotion in my current job. I also believe that if something turns out bad in my current job and if I ever need to look for a new place to work, having the certificate in computer science will help me get employed as a computer programmer (i.e. my choice for the new job wouldn't be restricted to the field of Statistics). Athabasca University is claiming that the certificate program is meant to be equivalent to the undergraduate minor in computing science. I carefully looked at the certificate's curriculum and as far as I am concerned, the certificate program does have the same level of rigour as the undergraduate minor in Computer Science programs offered by other Canadian universities. I am also confident that the certificate program will get me to pick up enough skills/background to start a career as a computer programmer. The reasons why I am not 100% sure on getting the certificate is worth the tuition are: Athabasca University is a distance education institution (accredited by government but still) The credential that I will receive is "university certificate", not a "undergraduate degree" Do you think it's a good idea for me to pursue the certificate, given the two facts above? again, I already have my Bachelor's degree - although it is not in CS Thanks,

  Read the article

• Mouse selects everything on its own

  - by meneer

  I have a strange problem that my mouse keeps selecting everything I point to. For example, if I open Rhythmbox, then at the top of the screen there is a text which says which song is playing. If I move my mouse over this text, then it will select this text; but I am not clicking. This behaviour does not happen in all programs. For example in Firefox I have no problem at all. Maybe it is Gtk related? Nautilus also behaves strangely; I cannot open files by clicking on them, I have to select and make a box around the file and then press enter to open it. If I click, then nothing happens. Similar problems also happen with other Gtk software. I think the problem might be related to touchscreen issues (I have a touchscreen). I run Gnome 3 on Ubuntu 12.04. I have a HP touchsmart 610 desktop computer. Any help is greatly appreciated. UPDATE: I just did a fresh reinstall, and I am 90% certain that it is related to the touchscreen drivers. Here is what happens when I reinstall. At first boot, so exactly after install, everything works fine, except the touchscreen: The touchscreen does not respond. I update ubuntu, because I installed from an old CD (CD with ub. 12.04). Then on next reboot I have touchscreen working , but the working touchscreen comes together with the mouse selecting everything on its own. SECOND QUESTION: Would anybody know how I could figure out what those touchscreen drivers are (so that I can disable them) ?

  Read the article

• Ubuntu 12.04 Full Screen without Unity Hub

  - by Xatolos

  I couldn't find an answer for this, so I thought I would try here. My problem is, I have some games on Wine that play in full screen mode but I can't really get them in full screen mode. When they start up, they end up with the GUI's "HUD" overlapping the game which is really annoying and well kills the option to play the game. This has also happened in a few of my Linux programs as well. While I wrote its a problem with Unity, it really isn't limited to this though. I've done full screen mode on Unity and had the Unity side bar and top menu overlap, I've used Gnome and had the same issue happen, Gnome menu is in the top, Cinnamon had the same issue. Sometimes if I Alt-Tab out of it and back into the program it MIGHT remove the HUD but that doesn't always work, and lets face it, full screen mode that is killed by the GUI just isn't something that can really be ignored. Any suggestions or help would be highly welcomed. My laptop http://www.cnet.com/laptops/asus-g53jw-a1-15/4507-3121_7-34210244.html edit Seems so far to be an issue with Unity and Gnome being in 3D mode, and possibly an issue with my NVidia card and XServe (I think that was it...). Going to Unity/Gnome 2d modes seem to help with this for the moment...

  Read the article

• Librated error when creating partition table

  - by Marko

  I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

  Read the article

• Dell Inspiron7520 and ubntu 12.04 issues

  - by user91358

  I have a DELL Inspiron 7520 in the highest configuration: 3rd Generation Intel® Core™ i7-3612QM processor (6M Cache, up to 3.1 GHz) 15.6" Full High Definition (1080p) LED Display 8GB3 Dual Channel DDR3 SDRAM at 1600MHz 1TB 5400RPM SATA HDD + 32GB mSATA SSD w/Intel Smart Response Blu-ray Disc (BD) Combo (Reads BD and Writes to DVD/CD) AMD Radeon™ HD 7730M 2GB 6.09 lbs and I have installed Ubuntu 12.04 few days ago and I'm facing some issues: 1) sometimes the whole ntb freezes and I have to hold power button for 5 secs to shut it down. I think it is something with VGA and connected external monitor. I have read somewhere that it is already a reported bug, but what I am not sure about that it is doing sporadically. Sometimes it freezes right after I log in, sometime I ran few hours and then it freezes. I am using those proprietary drivers but I wasn't been able to install those with updates. 2) the next issue is the fan is quite noisy even when the ntb is almost Idle. (max 10% CPU usage). Can you recommend me some software which could do this power management to lower the noise? I have tried CPU frequency scaling indicator, but it seems that it has not any effects. 3) and issue no. 3: when I want to log out, restart or shutdown using the menu in upper right corner the upper and left trays disappear, but programs are still running and they won't close to complete log out or shutting down the OS. When I use the CLI command, it works fine. Thanks for any help you can provide.

  Read the article

• Using "gedit", a string of errors occours

  - by Kumuluzz

  I'm trying to program some small programs in C in terminal and gedit. But everytime i use gedit then a string of errors occours. When i open a new file nothing happens. But in the exact same moment i save the file, then a string of erros coour. Also if i open an already existing file (not a new one), then when the gedit window opens the old file all the lines of errors are writen. In both cases in less than a second and nothing more happens. An example to the error: "error: line 35272: 0 is wrong flag id". They are all similar to this, except the line number is different. There are like 50 of them. I'm running 11.10, just installed it a couple of days again (yes, i'm a newbie) and i've updated all the files recently. I've tried reinstalling gedit via: sudo apt-get --reinstall install gedit It kinda made it worse, now a lot of the lines are shown twice. So now it goes (this is a copy of the first lines of error): error: line 6787: 0 is wrong flag id error: line 10034: 0 is wrong flag id error: line 10034: 0 is wrong flag id error: line 11351: 0 is wrong flag id error: line 11351: 0 is wrong flag id error: line 11849: 0 is wrong flag id error: line 11849: 0 is wrong flag id error: line 15609: 0 is wrong flag id error: line 15609: 0 is wrong flag id error: line 19814: 0 is wrong flag id

  Read the article

• Mouse freezes for User Account but not guest session

  - by Rosie

  this question has been asked before but there wasn't an answer. The mouse on my computer freezes whenever I log in to my User Account, a few seconds after, just before the account opens. The keyboard still works, and programs seem to work as normal. If I log out, the mouse starts to work again. If I log in as a guest, the mouse works fine throughout. I have tried restarting, shutting down, which hasn't resolved the problem. Just after the problem started, I logged in as a guest and tried to open Firefox, but although I haven't logged in as a guest for ages, there was a message saying that Firefox couldn't be opened as it was already running. Could this have been in my main account? Do you know how I can unfreeze the mouse? Is it the same procedure that is recommended on other questions? I am extremely untechnical, and a friend did all the ubuntu installation. So a very detailed step by step would be appreciated if I have to use code to fix this.

  Read the article

• How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics?

  - by PeterDC

  Background: I'm a 3D artist (as a hobby) and have recently started using Ubuntu 12.04 LTS as a dual-boot with Windows 7. It's running on my a fairly new 64-bit Toshiba laptop with an nVidia GeForce GT 540M GPU (graphics card). It also, however has Intel Integrated Graphics (which I suspect Ubuntu's been using). So, when I render my 3D scenes to images on Windows, I am able to choose between using my CPU or my nVidia GPU (faster). From the 3D application, I can set the GPU to use either CUDA or OpenCL. In Ubuntu, there's no GPU option. After doing (too much?) research on the issues with Linux and the nVidia Optimus technology, I am slightly more enlightened, but a lot more confused. I don't care one bit about the Optimus technology, as battery life is not by any means an issue for me. Here's my question: What can I do to be able to use CUDA-utilizing programs (such as Blender) on my nVidia GPU in Ubuntu? Will I need nVidia drivers? (I have heard they don't play nicely with Optimus setups on Linux.) Is there at least a way to use OpenCL on my GPU in Ubuntu?

  Read the article

• I can write code...but can't design well. Any suggestions?

  - by user396089

  I feel that I am good at writing code in bits and pieces, but my designs really suck. The question is how do I improve my designs (in order to become a better designer). I think schools and colleges do a good job of teaching people as to how to become good at mathematical problem solving, but lets admit the fact that most programs taught at school are generally around 1000 - 2000 lines long, which means that it is mostly an academic exercise and no way reflects the complexity of real world software (a few hundred thousand to millions of lines of code). This is where I believe that even projects like topcoder/project euler also won't be of much help, they might sharpen your mathematical problem solving ability - but you might become a theoretician programmer; someone who is more interested in the nice, clean stuff, and someone who is utterly un-interested in the day to day mundane and hairy stuff that most application programmers deal with. So my question is how do I improve my design skills? That is the ability to design small/medium scale applications that will go into a few thousand of lines of code? How can I learn design skills that would help me build a better html editor kit, or some graphics program like gimp?

  Read the article

• Create new terminal commands

  - by sleort

  I recently installed eclipse the manual way. Extracting the file, setting up eclipse.desktop etc. It all works flawlessly. I also know it is possible to install eclipsee using sudo apt-get install eclipse-platform. If I use this method I can use the command eclipse in the terminal, and the program will start. Now the manual way I used does not enable the eclipse-command in the terminal. Instead if I use eclipse-command it asks me to install eclipse from the Softwarecenter (sudo apt-get install eclipse-platform). I wondered if there was some way of setting up a command like this to start eclipse? If so, can I do it for other programs like Apache-Maven mvn-command? I don't want to use "aliases" because I cannot setup and eclipse alias, when "eclipse" is listed in the apt repository. It seems as if only if I install the eclipse from apt-get install I can start eclipse from a single command in the terminal. I appreciate any help, and thanks in advance!

  Read the article

• ubuntu 13.10 liveboot/installer loads dots, then does nothing

  - by user200245

  Problem: When I load an Ubuntu 13.10 (64-bit) live USB / installer on my laptop, the purple Ubuntu screen with the white dots appears, the dots turn orange (indicating its loading), then after a few seconds the screen turns completely black and nothing else happens. I can not install Ubuntu 13.10 on this computer. What I've Tried: I've re-downloaded the .iso file from canonical. I've burned the .iso to the USB using the default linux usb image writer, and the Windows programs YUMI and Linux Live USB Creator; same thing happens each time. Yes, I'm sure my computer is 64 bit. I'm currently running Linux Mint 15 on it, which runs perfectly. It's a Sager NP7330 / Clevo w230st. extra info A few months I installed Ubuntu 13.04 on this machine, which installed perfectly. Normally I'd install that then dist-upgrade to 13.10, HOWEVER this computer is only a few months old and the wireless/network drivers for my network card were not implemented until kernel 3.11 (which comes w ith 13.10). I tried manually downloading kernel 3.11 and installing it (on 13.04), however the wireless card nor ethernet card still did work with Ubuntu 13.04. So my only real hope is to get 13.10 working. Does anyone know what's up with this?

  Read the article

• My proposed design is usually worse than my colleague's - how do I get better?

  - by user151193

  I have been programming for couple of years and am generally good when it comes to fixing problems and creating small-to-medium scripts, however, I'm generally not good at designing large scale programs in object oriented way. Few questions Recently, a colleague who has same number of years of experience as me and I were working on a problem. I was working on a problem longer than him, however, he came up with a better solution and in the end we're going to use his design. This really affected me. I admit his design is better, but I wanted to come up with a design as good as his. I'm even contemplating quitting the job. Not sure why but suddenly I feel under some pressure e.g. what would juniors think of me and etc? Is it normal? Or I'm thinking a little too much into this? My job involves programming in Python. I try to read source code but how do you think I can improve me design skills? Are there any good books or software that I should study? Please enlighten me. I will really appreciate your help.

  Read the article

• "bug" in C++11 text by Stroustrup?

  - by Astara

  I found an apparent contradiction in the c++ text having to do with the result of the c_str() function operating on std:strings (in my copy, the definition and contradiction are on p1040). First it defines the c_str() function as something that produces a 'C-style' (zero-terminated) string, but later it talks about how a C++ c_str value can have embed a 'C'-style, end-of-string terminators (i.e. NUL's) embedded in the string (that is defined by being NUL terminated). Um... does anyone else feel that this is a 'stretching' of the definition of a C-string beyond it's definition? I.e. I think what it means, is that if you were to look at the length() function as applied to the string, it will show a different end of string than using the C-definition of a z-string -- one that can contain any character except NUL, and is terminated by NUL. I likely don't have to worry about it in my of my programs, but it seems like a subtle distinction that makes a C++ c_str, not really a 'C'-string. Am I misunderstanding this issue? Thanks!

  Read the article

• Help trying/downloading ubuntu

  - by koolomwee

  I can't try ubuntu. Every time i put in my disk and press try, it shows the ubuntu sign with the dots under it than it shows a command screen basically blinking saying that it closed and canceled applications belonging to ubuntu... Than I tried to download it from the disk... same thing. Than, because I have windows, I tried to download it from the website and it worked. I rebooted my computer and went into the Ubuntu option just to find a blinking command screen again... How do I get ubuntu to work? What does happen (with the command screen) is that it shows commands that are blinking to fast for me to read the whole thing, and then it stops after like a minute or two of blinking. The only thing I do get to read is that Ubuntu commanded some applications to shut down. In the CD one it only has like 5 error messages, and when I reboot and select Ubuntu, there are over a hundred error messages. With the live-cd I have to shut down my computer to use it again. With the reboot and clicking ubuntu option it reboots by itself. I expect it to actually start up with no error messages. UPDATE I've been trying to start Ubuntu for the last couple of days, and I noticed on my last try that it said "SIGNAL 15 RECEIVED"... It also said that it's stopping Bluetooth and all other programs, and that its rebooting Maybe that'll help a little with answering my question... thanks :) this also might help: computer brand/model: HP Windows 7 Home Premium Service Pack 1, HPE240f graphics card: ATI Radeon HD 5570 I also wrote the same question here: https://answers.launchpad.net/wubi/+question/194537 might help a little more with information

  Read the article

• Should I use my real name in my open source project?

  - by Jardo

  I developed a few freeware programs in the past which I had signed with my pseudonym Jardo. I'm now planning to release my first open source project and was thinking of using my full real name in the project files (as the "author"). I thought it would be good to use my name as my "trademark" so if someone (perhaps a future headhunter) googles my name, they'll find my projects. But on the other side, I feel a bit paranoid about disclosing my name (in the least case I could be getting a lot of spam to my email, its not that hard to guess your private email from your name). What do you think can be "dangerous" on disclosing your full name? What are the pros and cons? Do you use your real name or a pseudonym in your projects? I read this question: What are the advantages and disadvantages to using your real name online? but that doesn't apply to me bacause it's about using your real name online (internet discussions, profiles, etc.) where I personally see no reason to use my real name... And there is also this question: Copyrighting software, templates, etc. under real name or screen name? which deals with creating a business or a brand which also doesn't apply to me because I will never sell/give away my open source project and if someone else joins in, they can write their name as co-author without any problems...

  Read the article

• Problem with understanding how to start

  - by Coolface

  Okay, this might be a little off-topic but i try anyway. Sorry to bother. So i'm working as sysadmin for at least 5 years now and i quite enjoy IT field in general. Somehow i was never interested in programming much but always want to learn something at least easy and for personal usage. As sysadmin i need scripting skills so learn shell scripting without much problems, i also try to learn pascal, delphi, basic over time and must recent was python. Well, my problem is when i try to learn programming i just can't apply what i learn from the books to the real word. What i mean is i understand there are data structures, algorithms, variables, lib's, if-then logic, etc. but i just can't understand how to apply this things when i want to do real things. Like i want to get a something simple as parse web page, i draw a quick algorithm like get a web page, find a word on it and write a to file, on the paper everything look simple but when i get to the coding i just stuck pretty much from the start. I try read code of the real programs that just totally confusing especially big parts with many classes so i'm just quickly lost a trail what this code do. I think i just lack some fundamentals to see a big picture but don't really know what this might be? Or maybe i just don't have a passion to programming at all... My best bet was a shell scripting so i have really no problems to write complex scripts but this just not enough. Recently i was read around 5 or 6 python books because everyone say it's so easy even kid can code something but still no much luck, python is good and easy but i can't make something harder then a prodecurial style code like in bash for easy things but when i want harder things i'm still stuck. In college i was also not a math and tech guy and like to study non-tech stuff mostly like economy, psychology maybe that my problem? Anyway any advice would be greatly appriciated.

  Read the article

• Oracle Enterprise Manager 12c - New tools announced at OOW

  - by Cinzia Mascanzoni

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Oracle announced enhanced tools and programs for Oracle Enterprise Manager 12c, including a new Enterprise Manager Extensibility Exchange, updated Oracle PartnerNetwork Enterprise Manager Knowledge Zone, and additional Enterprise Manager Extensibility Kit resources, enabling management of all software and hardware assets from a “single pane of glass,” to help partners accelerate their transformation to the public and private cloud.

  Read the article

< Previous Page | 135 136 137 138 139 140 141 142 143 144 145 146  | Next Page >