Search Results

Search found 1473 results on 59 pages for 'bill johnson'.

Page 14/59 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Can I set up a COM Port that Connects via TCP/IP?

    - by Kristopher Johnson
    I have an RS232 device connected to a Digi PortServer on my network. I can telnet to the Digi's IP and port number to communicate with that RS232 device. I have a Windows application that knows how to talk to the device, but it wants to connect directly to an RS232 port. So, my question: Is there some way to set up a COM port so that when this application connects to it, it goes through the network to the Digi to communicate with the device? I have run across the utility TCP-Com, which seems like it might be a solution. Is this the best option?

    Read the article

  • Can a faulty battery cause a laptop to crash?

    - by Paul Johnson
    After replacing a blown out motherboard, my Toshiba Satellite C600 is still malfunctioning lately: BSODs. Distorted graphics, and freezes. Sudden shutdowns. After removing the battery and doing a re-format the laptop works perfectly (I should mention the problems continued before removing the battery after the re-format). I haven't seen a fault while solely running on A/C power for two days. Could the problem be a faulty battery?

    Read the article

  • Windows 7 doesn't show image size for all images

    - by Cole Johnson
    On Windows 7's new file layout in Explorer. Some PNGs will show the size whereas others won't. I've tried rebooting and clearing the cache, but it doesn't work. Also, all of these images were saved with Paint.NET, so I am sure that the size isn't embeded in the file, and if it is, it appears that Windows doesn't go by it. The ones without sizes are 300x300. Is there a maximum size before it won't show the size anymore?

    Read the article

  • Use WMI to detect a USB drive was connected, regardless of whether it was mounted?

    - by Seth Petry-Johnson
    I am writing a script that uses MS KB 823732 to temporarily prevent users from plugging in new USB storage devices. This works fine, and the HKLM\...\Services\UsbStor registry key successfully blocks newly-connected devices from being accessed. Is there a WMI event that will tell me that a drive was connected, regardless of whether it was mounted? I tried querying for __InstanceCreationEvent but that is apparently raised only after the drive is mounted and made available, which doesn't fit my requirements.

    Read the article

  • Understanding the nop byte(s)

    - by Cole Johnson
    Ok, so I was reading through the AMD64 manuels and knowing that nop is really an xchg eax, eax, I looked at the xchg and found something interesting, that it seems a byte can be encoded into the instruction for specifying the registers (apologies I'm on my iPod): picture. So what I am wondering is how does the processor know if there is a byte after to work with or is it that that extra register has to be of type rAX causing it to actually still be the one byte 0x90

    Read the article

  • Intsalling Linux on PowerEdge R410 via USB

    - by Bill Johnson
    I’m hoping someone can help me with the following issue. I have a Dell PowerEdge R410 and basically the Optical Drive has failed when I have been given the server. I have installed 2 SATA drives and want to install Ubuntu 11.04; however, each time I have tried i.e. using bootable .iso on USB it failed. I assume it's failing as with a lot of releases they all look at the CD drive. Ubunutu has failed on installation with the error message unable to mount CD. I have tried installing Microsoft Hyper-v and that also fails as during installation it asks for CD/DVD drivers. Tried embedding ISO's from various distro's (Linux and Windows) with drivers and that hasn't worked out either. Does anyone have any idea on how I can get Ubuntu on this server? Should I look towards an old distro perhaps?

    Read the article

  • Lightweight outlook search

    - by Simon Johnson
    Does anybody know of a plugin for Outlook 2003 that makes the search fast and accurate? I tried using Microsoft Search and Google Desktop Search but I find that these product slow down my development machine too much. I heard of Lookout but it appears that Microsoft has pulled it.

    Read the article

  • How to handle sh: fetch: command not found

    - by Tyler Johnson
    Okay, I'm a noobie. I know how to build and compose a website, but I have no idea what I'm doing when it comes to servers and server commands, etc. I've recently had a problem with all of my sites on our servers going down all at once and then I have to go in and reboot the server for them to come up again. At first this was annoying, but now it is becoming agonizing as it now takes 3-4 reboots for the websites to come back up. I contacted support for my hosting, but they are not being very helpful. They just keep telling me what the issue might be and basically telling me that I'm going to have to look into it and figure it out, which really isn't possible since I know nothing. Anyway, here are the things they said were possible reasons: They said I have "strange logs" in my Apache webserver log, error: sh: fetch: command not found. My php.ini memory limit is: 256M which is very high. It should be 32M or 64M. Server is reaching Max Clients, meaning we have more than 150 visitors at a time. (They supposedly "fixed" this, but the sites/server are still going down) I have some Wordpress sites with plugins getting errors like: PHP Warning: pack(): Type H: illegal hex digit G in... PHP Fatal error: Cannot use object of type stdClass as array in... PHP Fatal error: Maximum execution time of 30 seconds exceeded in... PHP Fatal error: Call to undefined function file_exists() in... PHP Parse error: syntax error, unexpected '<' I know that's a lot, but I really am at wits end and have no idea what to do now. If anyone could maybe give me some advice or point me in the right direction I would greatly appreciate it! Thanks! Oh, and here are the specs for my server: RAM: 2048MB CPU Shares: 40 Primary Disk: 50GB Data Transfer: 75GB Port Speed: 5Mbps

    Read the article

  • How to determine if a CentOS system is Raid-1?

    - by Tedd Johnson
    I've tried searching for this answer, but haven't found anything elegant. I have numerous servers in a colo that is in another state. I need to find a way to check that the servers have RAID-1 on them, so that I can determine if they were setup correctly by my colo. df -h shows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 442G 1.5G 418G 1% / /dev/sda1 99M 19M 75M 20% /boot tmpfs 4.0G 0 4.0G 0% /dev/shm however as CentOS uses LVM by default, this doesn't indicate if a RAID-1 is present. it is supposed to be a software raid, so I'm pretty sure there should be a way to check. Thanks

    Read the article

  • HDD situation - what would be best - data and backup

    - by Sam Johnson
    I just installed W8 on an Intel 330 180 GB SSD. I have 3 1TB HDDs. 1 HDD will be external for backup. 2 HDDs are then available for my PC. I do not need 2 TB of storage, so I thought I'd set these up to be exact clones of one another, so that if one dies I have a backup in the computer to go along with my external. Is this a good set up? How best would this be accomplished? I've heard people suggest RAID but I've never done RAID, have no idea what it is, and have no idea how to set it up in my BIOS. Thanks in advance

    Read the article

  • Open and scroll through 42 GB text file in Mac OS X

    - by Django Johnson
    I am running Mac OS X 10.8.4 (Mountain Lion) and I am trying to open and scroll through a 42 GB .XML file. I plan on using an XML parser to parse through it and delete parts, but first I need to know how the document is structured so I can know what parts to save. How can I open this text / XML file and scroll through it so I can get a glimpse of its structure? I tried my default text-editor, text-mate, and that couldn't open it. I tried gEdit and that shows the first 10 or so lines, but then quits after trying to load the rest. I would greatly appreciate any and all suggestions!

    Read the article

  • Tell browsers to cache until last modified date changes?

    - by Chad Johnson
    My web site consists of static HTML files which are usually republished once per day, and sometimes more. I'm using Apache. In the vhost settings for my site, I'd like to tell browsers to cache HTML files indefinitely, until Apache sees that they are modified. So as soon as an HTML file is changed, Apache should immediately begin telling browsers it's changed and send the updated file. As soon as a new file is published, browsers should immediately begin receiving that...they should never receive old versions of files. Maybe ExpiresByType text/html modification and no "plus x days." Is something like this possible?

    Read the article

  • Unable to Use Bluetooth Mighty Mouse or Wireless Keyboard with Boot Camp

    - by Kristopher Johnson
    I have Windows 7 64-bit running on a MacBook Pro in a Boot Camp partition. I am trying to pair with my Bluetooth Mighty Mouse and Apple wireless keyboard under Windows, but whenever I try to do so, here's what happens: While on the Add a device window, I turn on the mouse or press a key on the keyboard, and the mouse or keyboard shows up in the list of available devices. I click the device and then the Next button, and the window displays Connecting to device... Time passes. Eventually, I get this error message: Adding this device to this computer failed Adding the device failed resulting in an unknown error. The reported error code is 0x80070015. Contact your device manufacturer for assistance. I've run Windows Update and Apple Software Update. I've also tried reinstalling the drivers from the Snow Leopard DVD. The mouse and keyboard both work fine when I boot into Mac OS X. FWIW, after many, many repeated tries, I eventually got it to work. I don't know why. So while my problem is solved, I'd still like to get an "answer" as to why trial-and-error seems to be the only approach. The keyboard, in particular, was hard to get set up. A few times, Windows would apparently recognize it and prompt me to enter the pairing code, but then it would time out after a couple of seconds (not long enough to enter the code). Grrrr.

    Read the article

  • Active Directory LDS Structure Best Practices

    - by Mark A Johnson
    I'm looking for guidance in structuring an LDS directory and finding only best practices targeted at Domain Services. Does anyone here have references for the hierarchical structure we set up in the directory? I'm interested in small items, like whether to name the top node with "DC" tags or "O" tags, etc. E.g., should it be "DC=CompanyName,DC=local" when we're not actually using any specific domain? Shouldn't it be "O=CompanyName"? And I'm interested in whether this question is even worth considering.

    Read the article

  • Help with OpenVPN setup on Windows Server 2003

    - by Bill Johnson
    Hi all, Just wondering if someone can assist me further with the set-up of OpenVPN on my Windows Server 2003. I have configured Win Server as per the following guide: http://tinyurl.com/kxusv and I'm now at the stage of Creating the config files. I have a few questions that I need some assistance with. My server IP is 192.168.1.10 and my routers IP address is 192.168.1.1 (the router is a Netgear DGN2000). I have edited the server.ovpn file as per the following: push "dhcp-option DNS X.X.X.X" # Replace the Xs with the IP address of the DNS for your home network (usually your ISP's DNS) push "dhcp-option DNS X.X.X.X" # A second DNS server if you have one to include my ISP DNS and I have not edited anything else. Now my issue is with the client1.opvpn file as per the below: client dev tap #dev-node MyTAP #If you renamed your TAP interface or have more than one TAP interface then remove the # at the beginning and change "MyTAP" to its name proto udp remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.crt" # Change the next two lines to match the files in the keys directory. This should be be different for each client. key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\client1.key" # This file should be kept secret ns-cert-type server cipher BF-CBC # Blowfish (default) encrytion comp-lzo verb 1 To me it looks like I will need to amend the following: remote YOURHOST.dyndns.org 1194 #You will need to enter you dyndns account or static IP address here. The number following it is the port you set in the server's config route 192.168.1.0 255.255.255.0 vpn_gateway 3 #This it the IP address scheme and subnet of your normal network your server is on. Your router would usually be 192.168.1.1 So, should the first line be the static IP of the machine that I'm applying this to? The IP address of the server (192.168.1.10) or something else? I'm also stuck on the second part 'route 192.168.1.0 255.255.255.0 vpn_gateway 3' Should this be the router IP which is 192.168.1.1 and the subnet is 255.255.255.0 and that is all I need to alter? The final part that I'm stuggling with is Configuring the router. Basically I have a Netgear DGN2000 and as it mentions that the router should be configured to port forward port 1194 to the server’s IP address of 192.168.1.150 all I have been able to do is in 'Firewall Rules' and on 'Inbound Services', set the Service to 'Any(ALL) and Send to LAN Server point to 1923.168.1.150. I'm not sure if this is correct? It is the following stage of the help guide that I'm struggling with and really need some help with: You need to make sure the port you configured OpenVPN to listen on is forwarded on the router to the IP address of your server. On the WRT54G, port forwarding is configured in the “Applications & Gaming” section. Enter 1194 for the port, UDP for the protocol, and 192.168.1.150 for the IP address. Make sure the entry is enabled and then save the setting. Next, you need to add an entry to the router’s Routing Table. This will enable the router to properly route requests from the clients to the TAP interface of the server. On the WRT54G you would go to the “Setup” page and then the “Advanced Routing” section. Enter the follwing info to make the entry: Enter Route Name: openVPN Destination LAN IP: 192.168.10.0 Subnet Mask: 255.255.255.252 Default Gateway: 192.168.1.150 Interface: LAN & Wireless Once the info has been typed in make sure you save the setting. Can anyone possibly guide me through setting this part up with my Netgear router. I see that once I have these 2 parts complete I'm there so I would really appreciate someone walking me through what is required in completing this. Much appreciated.

    Read the article

  • Excel 2007: Filtering out rows in a table based on a list

    - by Sam Johnson
    I have a large table that looks like this: ID String 1 abcde 2 defgh 3 defgh 4 defgh 5 ijkl 6 ijkl 7 mnop 8 qrst I want to selectivley hide rows by populating a list of filterd values. For example, I'd like to filter out (hide) all rows that contain 'ef', 'kl', and 'qr'. Is there an easy way to do this? I know how to use Advanced filters to include only the rows that contain those substrings, but not the inverse. Has anyone does this before?

    Read the article

  • Why did Intel drop the Itanium?

    - by Cole Johnson
    I was reading up on the history of the computer and I came along the IA-64 (Itanium) processors. They sounded really interesting and I was confused as to why Intel would decide to drop them. The ability to choose explicitly what 2 instructions you wanted to run in that cycle is a great idea, especially when writing your program in assembly, for example, a faster bootloader. The hundreds of registers should be convincing for any assembly programmer. You could essentially store all the functions variables in the registers if it doesn't call any other ones. The ability to do instructions like this: (qp) xor r1 = r2, r3 ; r1 = r2 XOR r3 (qp) xor r1 = (imm8), r3 ; r1 = (imm8) XOR r3 versus having to do: ; eax = r1 ; ebx = r2 ; ecx = r3 mov eax, ebx ; first put r2 into r1 xor eax, ecx ; then set r1 equivalent to r2 XOR r3 or ; SAME mov eax, (imm32) ; first put (imm32) into r1 xor eax, ecx ; then set r1 equivalent to (imm32) XOR r3 I heard it was because of no backwards x86 comparability, but couldn't thy be fixed by just adding the Pentium circuitry to it and just add a processor flag that would switch it to Itanium mode (like switching to Protected or Long mode) All the great things about it would have surly put them a giant leap ahead of AMD. Any ideas? Sadly this means you will need a very advanced compiler to do this. Or even one per specific model of the CPU. (E.g. a newer version of the Itanium with an extra feature would require different compiler). When I was working on a WinForms (target only had .NET 2.0) project in Visual Studio 2010, I had a compile target of IA-64. That means that there is a .NET runtime that was able to be compiled for IA-64 and a .NET runtime means Windows. Plus, Hamilton's answer mentions Windows NT. Having a full blown OS like Windows NT means that there is a compiler capable of generating IA-64 machine code.

    Read the article

  • Creating a network link between 2 very close buildings

    - by Daniel Johnson
    I have a charity who have two adjacent medium sized modern detached houses (in the UK): the buildings stand next to each other and are less than 5 metres apart. They have DSL connected to a single computer in one of the buildings. They want to add a network with wireless, and want it to work across both buildings. Being a charity they need to keep costs down. The network would be used for sharing Word documents, e-mail, browsing and skyping. My initial thoughts were to connect the buildings with fibre. So: Option 1 Use fibre between the buildings. Sufficient cable and two TP-LINK MC100CM Fast Ethernet Media Converters. Cost ~£80.00. But there is the extra cost and hassle of running the cable down and up the external walls, lifting and relaying paving, and burying underground. Never having fitted fibre I'm also a little worried about going up the wall and then bending the cable at 90 degrees to go through the wall and into the building. Option 2 Use two TP-Link TL-WA7510N High Powered Outdoor 5Ghz 15dBi Wireless antennas to connect the buildings. There is a clear line of sight at first floor level. Cost ~£100. And much easier to fit than fibre! Is using the TL-WA7510Ns overkill? Is there something more suitable? I had hoped to use some Netgear stuff, e.g. two DGN2200, one in each house and also use them to provide the wireless link between the buildings. However, in bridge mode wireless client association is not available and repeater mode with client association only supports WEP security which isn't strong enough. Is there something similar that would be up to the job? Option 3 Connect the buildings with UTP cable. My concerns here are risk of electric shock due to a difference of potential between the buildings (or are they so close this shouldn't be an issue) and protection from lightning strikes. Is fitting lighting arrestors expensive? And what can be done to ameliorate against the risk of shock? This all falls outside my area of expertise so I would really appreciate some advice.

    Read the article

  • Can I recover a lost text file in Windows 7?

    - by Marcus Johnson
    How can I recover a lost text file in Windows 7?? It has very important information in it and of course, it is gone because of the stupid Windows Update thing....it just automatically closed all of my stuff and restarted my computer!! Would the text file possibly be in the Temp folder in my computer?? I don't know much about this stuff...but I need it. I didn't save the file which makes me think I can never get it back...but I want to make sure. Thanks. I was using notepad.

    Read the article

  • Are there any easy ways to create a YouTube playlist or download queue from a text file?

    - by Eric Johnson
    In other words, if I have a list with entries formatted "[Artist Name] - [Track Name]" without advanced knowledge of their corresponding YouTube URLs (if any exist), how might I script things so that YouTube searches for each entry, and generates the URLs for the first n number of identical or similar entries per a YouTube query? Do any simple solutions come to mind that might lever wget, PowerShell, or Python? Thanks!

    Read the article

  • How to copy/paste LARGE amounts of text in Windows

    - by Johnson
    I am not sure if this is more suited for Superuser or Stackoverflow, but here goes... A little bit of background: I'm learning SQL and was trying to make a very large table which I could use for optimization tests. Something generic with random values. I created a little Java program to do just that, and was able to put out a text file with 100,000 lines, each line being an SQL INSERT statement for a new random record. However, with anything much bigger than 100,000 lines, I had problems either opening/using the text file in any text editor, or copying/pasting the text to the windows clipboard and then into SQL Developer so I could execute it as a script. I'm probably overlooking something really obvious, or doing something really stupid. There has got to be a better way to do this, but I couldn't find anything through Google or Stackoverflow or Superuser. Thanks!

    Read the article

  • Servers/Websites Keep Going Down

    - by Tyler Johnson
    Okay, I'm a noobie. I know how to build and compose a website, but I have no idea what I'm doing when it comes to servers and server commands, etc. I've recently had a problem with all of my sites on our servers going down all at once and then I have to go in and reboot the server for them to come up again. At first this was annoying, but now it is becoming agonizing as it now takes 3-4 reboots for the websites to come back up. I contacted support for my hosting, but they are not being very helpful. They just keep telling me what the issue might be and basically telling me that I'm going to have to look into it and figure it out, which really isn't possible since I know nothing. Anyway, here are the things they said were possible reasons: They said I have "strange logs" in my Apache webserver log, error: sh: fetch: command not found. My php.ini memory limit is: 256M which is very high. It should be 32M or 64M. Server is reaching Max Clients, meaning we have more than 150 visitors at a time. (They supposedly "fixed" this, but the sites/server are still going down) I have some Wordpress sites with plugins getting errors like: PHP Warning: pack(): Type H: illegal hex digit G in... PHP Fatal error: Cannot use object of type stdClass as array in... PHP Fatal error: Maximum execution time of 30 seconds exceeded in... PHP Fatal error: Call to undefined function file_exists() in... PHP Parse error: syntax error, unexpected '<' I know that's a lot, but I really am at wits end and have no idea what to do now. If anyone could maybe give me some advice or point me in the right direction I would greatly appreciate it! Thanks! Oh, and here are the specs for my server: RAM: 2048MB CPU Shares: 40 Primary Disk: 50GB Data Transfer: 75GB Port Speed: 5Mbps Type: Linux

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >