Search Results

Search found 5712 results on 229 pages for 'card'.

Page 14/229 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • ATI card - cannot set refresh rate higher than 60 Hz

    - by KubaV
    I am trying to set refresh rate to 85 Hz or 75 Hz at 1024x768 and 1280x1024. On Windows this works, so my card and monitor have 100% support. xrandr does not work - it gives me configure crtc 1 failed I use FGLRX. Please help Monitor:CRT - HP 92 (manual http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/lpv09818/lpv09818.pdf) G. card: AMD Radeon HD 6450 Sorry for bad english, I am Czech.

    Read the article

  • Did Adobe Photoshop just killed my Graphics Card for good?

    - by user6004
    I was working with Adobe Photoshop, just some regular work, when I came to edit a PSD file and change the text of some layer, when all of a sudden the PC froze. No mouse, screen is frozen, keyboard strokes aren't getting me anything, no Task Manager, nada. So I rebooted my PC, and then something quite terrifying appeared before my eyes. It was not the Checkdisk utility that was launched, that made me terrified (by the way, that reboot damaged the partition table of an external HDD that was connected at the time to my PC, but that's another story). It was the screen itself. Please have a look. So after Checkdisk finished and Windows loaded, I noticed that the resolution was not right. Instead of 1440x900 which I had set, it was 1280x1024. When I went to change it back, I had no option to change back to my old resolution, and has only 3 other general resolution properties, as if my Video Card (GeForce 8800 GTS btw) was not recognized. And what do you know, in the Device Manager it appeared with an exclamation mark. Inside the hardware, it said this: Windows has stopped this device because it has reported problems. (Code 43) Uninstalling the drivers, downloading the newest drivers from NVIDIA and installing them did not work. It always comes back to this. So, do you have any advice before I go out and buy a new graphics card? I thought this was the only option left, but maybe the experts at Super User can help me out. By the way, the dotted screen appears after every reboot, and I see the dots when the ASUS Motherboard screen shows up at boot. Thanks in advance.

    Read the article

  • Header Guard Issues - Getting Swallowed Alive

    - by gjnave
    I'm totally at wit's end: I can't figure out how my dependency issues. I've read countless posts and blogs and reworked my code so many times that I can't even remember what almost worked and what didnt. I continually get not only redefinition errors, but class not defined errors. I rework the header guards and remove some errors simply to find others. I somehow got everything down to one error but then even that got broke while trying to fix it. Would you please help me figure out the problem? card.cpp #include <iostream> #include <cctype> #include "card.h" using namespace std; // ====DECL====== Card::Card() { abilities = 0; flavorText = 0; keywords = 0; artifact = 0; classType = new char[strlen("Card") + 1]; classType = "Card"; } Card::~Card (){ delete name; delete abilities; delete flavorText; artifact = NULL; } // ------------ Card::Card(const Card & to_copy) { name = new char[strlen(to_copy.name) +1]; // creating dynamic array strcpy(to_copy.name, name); type = to_copy.type; color = to_copy.color; manaCost = to_copy.manaCost; abilities = new char[strlen(to_copy.abilities) +1]; strcpy(abilities, to_copy.abilities); flavorText = new char[strlen(to_copy.flavorText) +1]; strcpy(flavorText, to_copy.flavorText); keywords = new char[strlen(to_copy.keywords) +1]; strcpy(keywords, to_copy.keywords); inPlay = to_copy.inPlay; tapped = to_copy.tapped; enchanted = to_copy.enchanted; cursed = to_copy.cursed; if (to_copy.type != ARTIFACT) artifact = to_copy.artifact; } // ====DECL===== int Card::equipArtifact(Artifact* to_equip){ artifact = to_equip; } Artifact * Card::unequipArtifact(Card * unequip_from){ Artifact * to_remove = artifact; artifact = NULL; return to_remove; // put card in hand or in graveyard } int Card::enchant( Card * to_enchant){ to_enchant->enchanted = true; cout << "enchanted" << endl; } int Card::disenchant( Card * to_disenchant){ to_disenchant->enchanted = false; cout << "Enchantment Removed" << endl; } // ========DECL===== Spell::Spell() { currPower = basePower; currToughness = baseToughness; classType = new char[strlen("Spell") + 1]; classType = "Spell"; } Spell::~Spell(){} // --------------- Spell::Spell(const Spell & to_copy){ currPower = to_copy.currPower; basePower = to_copy.basePower; currToughness = to_copy.currToughness; baseToughness = to_copy.baseToughness; } // ========= int Spell::attack( Spell *& blocker ){ blocker->currToughness -= currPower; currToughness -= blocker->currToughness; } //========== int Spell::counter (Spell *& to_counter){ cout << to_counter->name << " was countered by " << name << endl; } // ============ int Spell::heal (Spell *& to_heal, int amountOfHealth){ to_heal->currToughness += amountOfHealth; } // ------- Creature::Creature(){ summoningSick = true; } // =====DECL====== Land::Land(){ color = NON; classType = new char[strlen("Land") + 1]; classType = "Land"; } // ------ int Land::generateMana(int mana){ // ... // } card.h #ifndef CARD_H #define CARD_H #include <cctype> #include <iostream> #include "conception.h" class Artifact; class Spell; class Card : public Conception { public: Card(); Card(const Card &); ~Card(); protected: char* name; enum CardType { INSTANT, CREATURE, LAND, ENCHANTMENT, ARTIFACT, PLANESWALKER}; enum CardColor { WHITE, BLUE, BLACK, RED, GREEN, NON }; CardType type; CardColor color; int manaCost; char* abilities; char* flavorText; char* keywords; bool inPlay; bool tapped; bool cursed; bool enchanted; Artifact* artifact; virtual int enchant( Card * ); virtual int disenchant (Card * ); virtual int equipArtifact( Artifact* ); virtual Artifact* unequipArtifact(Card * ); }; // ------------ class Spell: public Card { public: Spell(); ~Spell(); Spell(const Spell &); protected: virtual int heal( Spell *&, int ); virtual int attack( Spell *& ); virtual int counter( Spell*& ); int currToughness; int baseToughness; int currPower; int basePower; }; class Land: public Card { public: Land(); ~Land(); protected: virtual int generateMana(int); }; class Forest: public Land { public: Forest(); ~Forest(); protected: int generateMana(); }; class Creature: public Spell { public: Creature(); ~Creature(); protected: bool summoningSick; }; class Sorcery: public Spell { public: Sorcery(); ~Sorcery(); protected: }; #endif conception.h -- this is an "uber class" from which everything derives class Conception{ public: Conception(); ~Conception(); protected: char* classType; }; conception.cpp Conception::Conception{ Conception(){ classType = new char[11]; char = "Conception"; } game.cpp -- this is an incomplete class as of this code #include <iostream> #include <cctype> #include "game.h" #include "player.h" Battlefield::Battlefield(){ card = 0; } Battlefield::~Battlefield(){ delete card; } Battlefield::Battlefield(const Battlefield & to_copy){ } // =========== /* class Game(){ public: Game(); ~Game(); protected: Player** player; // for multiple players Battlefield* root; // for battlefield getPlayerMove(); // ask player what to do addToBattlefield(); removeFromBattlefield(); sendAttack(); } */ #endif game.h #ifndef GAME_H #define GAME_H #include "list.h" class CardList(); class Battlefield : CardList{ public: Battlefield(); ~Battlefield(); protected: Card* card; // make an array }; class Game : Conception{ public: Game(); ~Game(); protected: Player** player; // for multiple players Battlefield* root; // for battlefield getPlayerMove(); // ask player what to do addToBattlefield(); removeFromBattlefield(); sendAttack(); Battlefield* field; }; list.cpp #include <iostream> #include <cctype> #include "list.h" // ========== LinkedList::LinkedList(){ root = new Node; classType = new char[strlen("LinkedList") + 1]; classType = "LinkedList"; }; LinkedList::~LinkedList(){ delete root; } LinkedList::LinkedList(const LinkedList & obj) { // code to copy } // --------- // ========= int LinkedList::delete_all(Node* root){ if (root = 0) return 0; delete_all(root->next); root = 0; } int LinkedList::add( Conception*& is){ if (root == 0){ root = new Node; root->next = 0; } else { Node * curr = root; root = new Node; root->next=curr; root->it = is; } } int LinkedList::remove(Node * root, Node * prev, Conception* is){ if (root = 0) return -1; if (root->it == is){ root->next = root->next; return 0; } remove(root->next, root, is); return 0; } Conception* LinkedList::find(Node*& root, const Conception* is, Conception* holder = NULL) { if (root==0) return NULL; if (root->it == is){ return root-> it; } holder = find(root->next, is); return holder; } Node* LinkedList::goForward(Node * root){ if (root==0) return root; if (root->next == 0) return root; else return root->next; } // ============ Node* LinkedList::goBackward(Node * root){ root = root->prev; } list.h #ifndef LIST_H #define LIST_H #include <iostream> #include "conception.h" class Node : public Conception { public: Node() : next(0), prev(0), it(0) { it = 0; classType = new char[strlen("Node") + 1]; classType = "Node"; }; ~Node(){ delete it; delete next; delete prev; } Node* next; Node* prev; Conception* it; // generic object }; // ---------------------- class LinkedList : public Conception { public: LinkedList(); ~LinkedList(); LinkedList(const LinkedList&); friend bool operator== (Conception& thing_1, Conception& thing_2 ); protected: virtual int delete_all(Node*); virtual int add( Conception*& ); // virtual Conception* find(Node *&, const Conception*, Conception* ); // virtual int remove( Node *, Node *, Conception* ); // removes question with keyword int display_all(node*& ); virtual Node* goForward(Node *); virtual Node* goBackward(Node *); Node* root; // write copy constrcutor }; // ============= class CircularLinkedList : public LinkedList { public: // CircularLinkedList(); // ~CircularLinkedList(); // CircularLinkedList(const CircularLinkedList &); }; class DoubleLinkedList : public LinkedList { public: // DoubleLinkedList(); // ~DoubleLinkedList(); // DoubleLinkedList(const DoubleLinkedList &); protected: }; // END OF LIST Hierarchy #endif player.cpp #include <iostream> #include "player.h" #include "list.h" using namespace std; Library::Library(){ root = 0; } Library::~Library(){ delete card; } // ====DECL========= Player::~Player(){ delete fname; delete lname; delete deck; } Wizard::~Wizard(){ delete mana; delete rootL; delete rootH; } // =====Player====== void Player::changeName(const char[] first, const char[] last){ char* backup1 = new char[strlen(fname) + 1]; strcpy(backup1, fname); char* backup2 = new char[strlen(lname) + 1]; strcpy(backup1, lname); if (first != NULL){ fname = new char[strlen(first) +1]; strcpy(fname, first); } if (last != NULL){ lname = new char[strlen(last) +1]; strcpy(lname, last); } return 0; } // ========== void Player::seeStats(Stats*& to_put){ to_put->wins = stats->wins; to_put->losses = stats->losses; to_put->winRatio = stats->winRatio; } // ---------- void Player::displayDeck(const LinkedList* deck){ } // ================ void CardList::findCard(Node* root, int id, NodeCard*& is){ if (root == NULL) return; if (root->it.id == id){ copyCard(root->it, is); return; } else findCard(root->next, id, is); } // -------- void CardList::deleteAll(Node* root){ if (root == NULL) return; deleteAll(root->next); root->next = NULL; } // --------- void CardList::removeCard(Node* root, int id){ if (root == NULL) return; if (root->id = id){ root->prev->next = root->next; // the prev link of root, looks back to next of prev node, and sets to where root next is pointing } return; } // --------- void CardList::addCard(Card* to_add){ if (!root){ root = new Node; root->next = NULL; root->prev = NULL; root->it = &to_add; return; } else { Node* original = root; root = new Node; root->next = original; root->prev = NULL; original->prev = root; } } // ----------- void CardList::displayAll(Node*& root){ if (root == NULL) return; cout << "Card Name: " << root->it.cardName; cout << " || Type: " << root->it.type << endl; cout << " --------------- " << endl; if (root->classType == "Spell"){ cout << "Base Power: " << root->it.basePower; cout << " || Current Power: " << root->it.currPower << endl; cout << "Base Toughness: " << root->it.baseToughness; cout << " || Current Toughness: " << root->it.currToughness << endl; } cout << "Card Type: " << root->it.currPower; cout << " || Card Color: " << root->it.color << endl; cout << "Mana Cost" << root->it.manaCost << endl; cout << "Keywords: " << root->it.keywords << endl; cout << "Flavor Text: " << root->it.flavorText << endl; cout << " ----- Class Type: " << root->it.classType << " || ID: " << root->it.id << " ----- " << endl; cout << " ******************************************" << endl; cout << endl; // ------- void CardList::copyCard(const Card& to_get, Card& put_to){ put_to.type = to_get.type; put_to.color = to_get.color; put_to.manaCost = to_get.manaCost; put_to.inPlay = to_get.inPlay; put_to.tapped = to_get.tapped; put_to.class = to_get.class; put_to.id = to_get.id; put_to.enchanted = to_get.enchanted; put_to.artifact = to_get.artifact; put_to.class = to_get.class; put.to.abilities = new char[strlen(to_get.abilities) +1]; strcpy(put_to.abilities, to_get.abilities); put.to.keywords = new char[strlen(to_get.keywords) +1]; strcpy(put_to.keywords, to_get.keywords); put.to.flavorText = new char[strlen(to_get.flavorText) +1]; strcpy(put_to.flavorText, to_get.flavorText); if (to_get.class = "Spell"){ put_to.baseToughness = to_get.baseToughness; put_to.basePower = to_get.basePower; put_to.currToughness = to_get.currToughness; put_to.currPower = to_get.currPower; } } // ---------- player.h #ifndef player.h #define player.h #include "list.h" // ============ class CardList() : public LinkedList(){ public: CardList(); ~CardList(); protected: virtual void findCard(Card&); virtual void addCard(Card* ); virtual void removeCard(Node* root, int id); virtual void deleteAll(); virtual void displayAll(); virtual void copyCard(const Conception*, Node*&); Node* root; } // --------- class Library() : public CardList(){ public: Library(); ~Library(); protected: Card* card; int numCards; findCard(Card&); // get Card and fill empty template } // ----------- class Deck() : public CardList(){ public: Deck(); ~Deck(); protected: enum deckColor { WHITE, BLUE, BLACK, RED, GREEN, MIXED }; char* deckName; } // =============== class Mana(int amount) : public Conception { public: Mana() : displayTotal(0), classType(0) { displayTotal = 0; classType = new char[strlen("Mana") + 1]; classType = "Mana"; }; protected: int accrued; void add(); void remove(); int displayTotal(); } inline Mana::add(){ accrued += 1; } inline Mana::remove(){ accrued -= 1; } inline Mana::displayTotal(){ return accrued; } // ================ class Stats() : public Conception { public: friend class Player; friend class Game; Stats() : wins(0), losses(0), winRatio(0) { wins = 0; losses = 0; if ( (wins + losses != 0) winRatio = wins / (wins + losses); else winRatio = 0; classType = new char[strlen("Stats") + 1]; classType = "Stats"; } protected: int wins; int losses; float winRatio; void int getStats(Stats*& ); } // ================== class Player() : public Conception{ public: Player() : wins(0), losses(0), winRatio(0) { fname = NULL; lname = NULL; stats = NULL; CardList = NULL; classType = new char[strlen("Player") + 1]; classType = "Player"; }; ~Player(); Player(const Player & obj); protected: // member variables char* fname; char* lname; Stats stats; // holds previous game statistics CardList* deck[]; // hold multiple decks that player might use - put ll in this private: // member functions void changeName(const char[], const char[]); void shuffleDeck(int); void seeStats(Stats*& ); void displayDeck(int); chooseDeck(); } // -------------------- class Wizard(Card) : public Player(){ public: Wizard() : { mana = NULL; rootL = NULL; rootH = NULL}; ~Wizard(); protected: playCard(const Card &); removeCard(Card &); attackWithCard(Card &); enchantWithCard(Card &); disenchantWithCard(Card &); healWithCard(Card &); equipWithCard(Card &); Mana* mana[]; Library* rootL; // Library Library* rootH; // Hand } #endif

    Read the article

  • Card Shuffling in C#

    - by Jeff
    I am trying to write a code for a project that lists the contents of a deck of cards, asks how much times the person wants to shuffle the deck, and then shuffles them. It has to use a method to create two random integers using the System.Random class. These are my classes: Program.cs: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication3 { class Program { static void Main(string[] args) { Deck mydeck = new Deck(); foreach (Card c in mydeck.Cards) { Console.WriteLine(c); } Console.WriteLine("How Many Times Do You Want To Shuffle?"); } } } Deck.cs: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication3 { class Deck { Card[] cards = new Card[52]; string[] numbers = new string[] { "2", "3", "4", "5", "6", "7", "8", "9", "J", "Q", "K" }; public Deck() { int i = 0; foreach(string s in numbers) { cards[i] = new Card(Suits.Clubs, s); i++; } foreach (string s in numbers) { cards[i] = new Card(Suits.Spades, s); i++; } foreach (string s in numbers) { cards[i] = new Card(Suits.Hearts, s); i++; } foreach (string s in numbers) { cards[i] = new Card(Suits.Diamonds, s); i++; } } public Card[] Cards { get { return cards; } } } } classes.cs: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication3 { enum Suits { Hearts, Diamonds, Spades, Clubs } } Card.cs: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace ConsoleApplication3 { class Card { protected Suits suit; protected string cardvalue; public Card() { } public Card(Suits suit2, string cardvalue2) { suit = suit2; cardvalue = cardvalue2; } public override string ToString() { return string.Format("{0} of {1}", cardvalue, suit); } } } Please tell me how to make the cards shuffle as much as the person wants and then list the shuffled cards. Sorry about the formatting im new to this site.

    Read the article

  • mvc design in a card game

    - by Hong
    I'm trying to make a card game. some classes I have are: CardModel, CardView; DeckModel, DeckView. The deck model has a list of card model, According to MVC, if I want to send a card to a deck, I can add the card model to the deck model, and the card view will be added to the deck view by a event handler. So I have a addCard(CardModel m) in the DeckModel class, but if I want to send a event to add the card view of that model to the deck view, I only know let the model has a reference to view. So the question is: If the card model and deck model have to have a reference to their view classes to do it? If not, how to do it better? Update, the code: public class DeckModel { private ArrayList<CardModel> cards; private ArrayList<EventHandler> actionEventHandlerList; public void addCard(CardModel card){ cards.add(card); //processEvent(event x); //must I pass a event that contain card view here? } CardModel getCards(int index){ return cards.get(index); } public synchronized void addEventHandler(EventHandler l){ if(actionEventHandlerList == null) actionEventHandlerList = new ArrayList<EventHandler>(); if(!actionEventHandlerList.contains(l)) actionEventHandlerList.add(l); } public synchronized void removeEventHandler(EventHandler l){ if(actionEventHandlerList!= null && actionEventHandlerList.contains(l)) actionEventHandlerList.remove(l); } private void processEvent(Event e){ ArrayList list; synchronized(this){ if(actionEventHandlerList!= null) list = (ArrayList)actionEventHandlerList.clone(); else return; } for(int i=0; i<actionEventHandlerList.size(); ++i){ actionEventHandlerList.get(i).handle(e); } } }

    Read the article

  • Record 8 separate Line IN Channels from M-Audio Delta 1010 Card

    - by Peter Hoffmann
    I want to record the 8 separate Line IN Channels from my M-Audio Delta 1010 Card. The card is recogniced nicely and a can record a single channel via arecord -d 10 -f cd -t wav -D channel1 out2.wav. I've set up the different channels in ~/.asoundrc. Now if I want to record a second channel in parallel (arecord -d 10 -f cd -t wav -D channel2 out2.wav) I get the error arecord: main:564: audio open error: Device or resource busy As I understand the delta 1010 is a single Access Card, so only one application can access it at a time. Is this correct? The next step was to configure a dual channel input in .asoundrc # envy24 channel 1+2 only pcm.test { type plug ttable.0.0 1 ttable.0.1 1 slave.pcm ice1712 } Which works ok when I do a arecord -d 10 -f cd -t wav -D test -c 2 out.wav (BTW can anyone point me to a tool to split a multi channel wav into a file per channel?) But when I want to record the channels separately with (-I option) arecord -d 10 -f cd -t wav -D test -c 2 -I channel1.wav channel2.wav I get no recordings. Did I miss something with the configuration or what are my options to record all 8 channels via arecord. I've no experience with jackd. Is it an option to install jackd and record the line ins via jackd?

    Read the article

  • CPU Wars Is a Trump-Style Card Game Driven by Chip Stats

    - by Jason Fitzpatrick
    If you’re looking for the geekiest card game around, you’d be hard pressed to beat CPU Wars–a top-trumps card game built around CPU specs. From the game’s designers: CPU Wars is a trump card game built by geeks for geeks. For Volume 1.0 we chose 30 CPUs that we believe had the greatest impact on the desktop history. The game is ideally played by 2 or 3 people. The deck is split between the players and then each player takes a turn and picks a category that they think has the best value. We have chosen the most important specs that could be numerically represented, such as maximum speed achieved and maximum number of transistors. It’s lots of fun, it has a bit of strategy and can be played during a break or over a coffee. If you’re interested, you can pick up a copy for £7.99 (roughly $12.50 USD). Hit up the link below for more information. How To Customize Your Wallpaper with Google Image Searches, RSS Feeds, and More 47 Keyboard Shortcuts That Work in All Web Browsers How To Hide Passwords in an Encrypted Drive Even the FBI Can’t Get Into

    Read the article

  • Firmware/driver for Broadcom wifi card, PowerBook G4 running Ubuntu 12.04 [duplicate]

    - by user107831
    This question already has an answer here: How to Install Broadcom Wireless Drivers 40 answers This is my first time working with Ubuntu (or Linux), so please be patient. I am running Ubuntu 12.04-powerpc "Precise Pangolin" on a Mac PowerBook G4 with 1.67GHz processor. The firmware/driver for the wifi card is missing. For reasons not worth explaining, I cannot physically plug the computer into the network. I have another computer, a MacBook Pro running OSX, from which I can download files and port them by USB thumb drive. The wifi card in the PowerBook G4 is by Broadcom. The chip is BCM4306, rev. 3. The PCI number is 14e4:4302. I have downloaded b43-fwcutter_015-14_powerpc.deb and dropped it into the Home folder on the Ubuntu machine. However, it will not install. When I double-click, it opens with Ubuntu SoftwareCenter, but the "Install" button is inactive: I can't click it. There's a message beside the inactive button saying, "An older version of 'b43-fwcutter' is available in your normal software channels. Only install this file if you trust the origin." If I "right-click" the .deb file and open with Archive Manager, it shows me the "DEBIAN" and "usr" folders, but I'm unsure what to do from there...and fairly certain this is not the right way to do things. Maybe I have the wrong version of b43-fwcutter for my machine/version of Ubuntu? The documentation for this problem is a mess. It refers to all sorts of out-of-date Ubuntu versions and to an array of different "cutter" and firmware files. Maybe I'd be able to figure this out if I were a more seasoned Ubuntu user, but I have no idea why Sofware Center won't let me do the install. I would be VERY grateful for an explanation of how to get the wifi card working on this machine again. Thank you!

    Read the article

  • Android Card Game Database for Deck Building

    - by Singularity222
    I am making a card game for Android where a player can choose from a selection of cards to build a deck that would contain around 60 cards. Currently, I have the entire database of cards created that the user can browse. The next step is allowing the user to select cards and create a deck with whatever cards they would like. I have a form where the user can search for specific cards based off a few different attributes. The search results are displayed in a List Activity. My thought about deck creation is to add the primary key of each card the user selects to a SQLite Database table with the amount they would like in the deck. This way as the user performs searches for cards they can see the state of the deck. Once the user decides to save the deck. I'll export the card list to XML and wipe the contents of the table. If the user wanted to make changes to the deck, they would load it, it would be parsed back into the table so they could make the changes. A similar situation would occur when the eventually load the deck to play a game. I'm just curious what the rest of you may think of this method. Currently, this is a personal project and I am the only one working on it. If I can figure out the best implementation before I even begin coding I'm hoping to save myself some time and trouble.

    Read the article

  • SD Card only mounted after a reboot

    - by evothur
    Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

    Read the article

  • Using onboard and pci-e graphics card at the same time

    - by Endle
    Hello wonderful people. I know there are several other posts with similar questions. I also know how to use Google. I also have read up on posts discussing bumblebee, crossfire, ati catylist and many other interesting topics. I would just like someone to give me advice on how to use the onboard and pci-e graphics at the same time. I know the computer is capable of doing this. It works in Windows. I can use the VGA and DVI onboard port and the HDMI port of the add on card all at the same time. Works great in Windows 7, In Ubuntu, it seems only one or the other will work. I can use any combination of two displays on either adapter: VGA and HDMI..HDMI and DVI..so forth and so on. I have started experimenting with xorg.conf files, but have not been able to get any of them to work. Here is my last attempt at writing an xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" Screen 2 "Screen2" LeftOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Device" Identifier "Onboard Video" Driver "radeon" BusID "PCI:01:05.0" EndSection Section "Device" Identifier "Graphics Card" Driver "radeon" BusID "PCI:02:00.0" EndSection Section "Monitor" Identifier "CRT2" Option "VendorName" "ViewSonic" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DVI1" VendorName "ACR" ModelName "P224W" Option "DPMS" EndSection Section "Monitor" Identifier "DVI2" Option "VendorName" "Acer" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Screen" Identifier "Screen0" Device "Onboard Video" Monitor "CRT2" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Graphics Card" Monitor "DVI1" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection

    Read the article

  • USB mass storage couldn't get mounted

    - by revo
    It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • what is the best mid/high-end class audio/music creation audio sound card?

    - by Chris
    Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

    Read the article

  • Mount "locked" SD card as read-write in GNU/Linux

    - by Vi
    My Canon PowerShot A470 + CHDK can write to SD-cards that are "locked" (the lock switch is used to make the card bootable), but GNU/Linux `/dev/mmcblk1': Read-only file system (I'm using "Texas Instrument 5-in-1 Multimedia Card Reader") So I have to switch that switch on and off again and again. ("unlocked" to write to the card in Linux, "locked" to boot the camera from it). How to force locked card to be writable in GNU/Linux?

    Read the article

  • Outlook is looking for a smart card

    - by Sreekumar
    Dell computer with Windows 7 and Outlook 2003. I recently added a smart card reader to my computer for the National Guard so that I can access some military sites that require a smart card to log in. Now, every time Outlook attempts to download any mail from my civilian AT&T account (a pop e-mail server), I get a message asking me to "Insert a smart card". I've traced it to the send/receive feature (specifically receiving e-mails) but can find no reason that Outlook should be looking for a smart card.

    Read the article

  • Print Business card

    - by Tural Teyyuboglu
    I'm trying to create business card on adobe Photoshop. But I feel that, PS is not right choose for this reason: First of all after creating 1 business card, I can't duplicate it automatically to fill a4 page. I have to do it manually, one by one by duplicating 1 business card. After googling a bit,I've found another application but it'stoo simple, no way to change standarts templates. Which application is right for professional business card design?

    Read the article

  • How do i have 4GB of video memory with a 1GB video card?

    - by Tomas Spc Yaczik
    I ran the direct X diagnostic tool to take a look at my graphics capabilities and its telling me that the approximate video memory is clocked in at 4096MB. That doesn't make any sense, how is that possible? The only things that i can think of were that DirectX was inaccurate so i looked at the graphics statistics of my computer on CPU-Z which was included with the motherboard and that's telling me i have "negative" 1988MB. Not only is that not 4096MB, but its giving me a negative number and i know for a fact that you can't have a negative amount of memory???!!! The only things i can think of that would be amplifying my video memory output is the PCIe 3.0 bus, or that the motherboard is somehow including the on board video chip set with the video card which only then is only 2GB of video memory, which still has to be being amplified by something. Any suggestions?

    Read the article

  • Can I get dual monitor support (2xDVI) from my (DVI+HDMI) graphics card?

    - by nray
    It seems that pure 2 x DVI dual head video cards are becoming rare. Most cards feature something like 1 x DVI plus 1 x HDMI plus 1 x VGA or some other interface. The idea seems to be that you can just use an HDMI <= DVI adapter. One result is that cards are seldom marked " 2 x DVI " anymore, but does this mean that they support simultaneous output on all interfaces? Are all cards dual head these days? Take Asus's nVidia cards for example, they routinely have 1 x DVI plus 1 x HDMI instead of 2 x DVI, so my question is, are these equivalent to a dual head DVI card, or is there some detail required for dual monitor support? I use dual-monitor stretched desktops for digital signage projects.

    Read the article

  • Why doesn't my sound card start? It reports code 10.

    - by Sarim Ali
    When I installed the XP for first time my sound card was working fine. But only after the first reboot it has stopped working. Under Device Manager, the section "sound video and game controller" the entry YAMAHA Native DS1 WDM Driver, has a exclamation mark on it. On left clicking and selecting properties it shows this message "This device cannot start. (Code 10)". On trying to update driver it says a better driver can not be found. Any idea how I can solve the issue? Update: As suggested by harrymc I uninstalled the device "YAMAHA Native DS1 WDM Driver" , and scanned for hardware changes. The windows detected and installed the soundcard and it started working properly.BUT, after restarting the same problem occurs. So, now everytime I reboot the computer I am stuck to, repeating the process of uninstalling the device to make it work.

    Read the article

  • Are these symptoms of a video card is dying?

    - by K Cloud
    What I am getting from my PC: Scrambled text in the boot menu. The scrambled text dissapears and everthing goes normal after several restarts, or the computer has worked for some time. Display goes blank showing, windows kernel mode driver stopped responding. Sometimes the windows just hangs, I need to restart the pc for that. There used to be some scrambled colors in my windows, so I cleaned up my video carda and port and reinstalled the video card, things are something right. The pc runs normally for hours in safe mode, as diffault display driver works at that case. My PC specs: Core 2 Duo processor 2 GB RAM NVIDIA EN210 SILENT GPU Windows 8 Drivers details: NVIDIA drivers - v331.65, told to be fully compatible with Win8 Currently I am installing Windows 7 and will be putting the older version of driver v320 to test, yet I'm really confused weather my GPU is dying or still on go.

    Read the article

  • How should I access frame buttons from a controller in an MVC approach?

    - by Loris
    I'm developing an italian card game using the mvc pattern. I have the class GameFrame that contains the view. The user's card are buttons (JButton objects). I have 3 controllers: GameController: to control the game in general. Contains the game loop. HumanPlayerController: to control the user input ComputerPlayerController: contains the AI of the computer PlayerController: is an interface with the makeTurn() method. It's implemented by HumanP.C. and ComputerP.C. HumanPlayerController implements ActionListener too. But what is the right way to access to the GameFrame buttons? I need it for understand which card was chosen. GameFrame and HumanPlayerController are in different packages. Should i make the JButtons public?

    Read the article

  • What are the performance differences between PCI-Express x16 and x4

    - by Cestarian
    I have two PCI-Express 2.0 x16 slots on my motherboard, but one of them is actually just x4. For passing through my graphics card to a virtual machine I need to use both slots simultaneously and unfortunately, the easiest way for me to achieve that is putting the stronger card in the x4 slot (secondary slot; I need the stronger card to be in the secondary slot, not the primary). As such I am wondering what sort of noticable performance differences I can expect from using the x4 slot with a strong card as opposed to having it in the true x16 slot. Does it limit the performance so much that the strong card in the x4 slot will actually perform worse than the significantly weaker card in the x16 slot? (For spec comparison I am using a GTX-670 in the x4 slot and GTX-550-Ti in the x16 slot) What implications does this have?

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >