Search Results

Search found 7799 results on 312 pages for 'changing'.

Page 14/312 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• RHEL Cluster FAIL after changing time on system

  - by Eugene S

  I've encountered a strange issue. I had to change the time on my Linux RHEL cluster system. I've done it using the following command from the root user: date +%T -s "10:13:13" After doing this, some message appeared relating to <emerg> #1: Quorum Dissolved however I didn't capture it completely. In order to investigate the issue I looked at /var/log/messages and I've discovered the following: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering GATHER state from 0. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Creating commit token because I am the rep. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Storing new sequence id for ring 354 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering COMMIT state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering RECOVERY state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [0] member 192.168.1.49: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 848 rep 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru 61 high delivered 61 received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Did not need to originate any messages in recovery. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Sending initial ORF token Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CMAN ] quorum lost, blocking activity Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [SYNC ] This node is within the primary component and will provide service. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering OPERATIONAL state. Mar 22 16:40:42 hsmsc50sfe1a kernel: dlm: closing connection to node 2 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a clurgmgrd[25809]: <emerg> #1: Quorum Dissolved Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 1 Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Cluster is not quorate. Refusing connection. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing connect: Connection refused Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-21). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing disconnect: Invalid request descriptor Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering GATHER state from 9. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Creating commit token because I am the rep. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Storing new sequence id for ring 358 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering COMMIT state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering RECOVERY state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [0] member 192.168.1.49: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 852 rep 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru f high delivered f received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] position [1] member 192.168.1.51: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] previous ring seq 852 rep 192.168.1.51 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] aru f high delivered f received flag 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Did not need to originate any messages in recovery. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] Sending initial ORF token Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] CLM CONFIGURATION CHANGE Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] New Configuration: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.49) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Left: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] Members Joined: Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] #011r(0) ip(192.168.1.51) Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [SYNC ] This node is within the primary component and will provide service. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [TOTEM] entering OPERATIONAL state. Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [MAIN ] Node chb_sfe2a not joined to cman because it has existing state Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.49 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CLM ] got nodejoin message 192.168.1.51 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 1 Mar 22 16:40:42 hsmsc50sfe1a openais[25715]: [CPG ] got joinlist message from node 2 Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Cluster is not quorate. Refusing connection. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing connect: Connection refused Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-111). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing get: Invalid request descriptor Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Invalid descriptor specified (-21). Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Someone may be attempting something evil. Mar 22 16:40:42 hsmsc50sfe1a ccsd[25705]: Error while processing disconnect: Invalid request descriptor How could this be related to the time change procedure I performed?

  Read the article

• Changing Corosync/Heartbeat pair's active node based on MySQL/Galera cluster state

  - by Hace

  Background I'm planning on building a High Availability "cluster" for our Zabbix instance by placing two physical servers in one server room and two in another server room. In each server room one of the physical servers will run Zabbix on RHEL and the other will run Zabbix's MySQL database, also on RHEL. I'd prefer synchronous replication for the MySQL nodes so I'm planning on using Galera in a master-slave configuration. The Zabbix instances on the two Zabbix servers would be controlled by Heartbeat/Corosync (although Red Hat Cluster Suite is also an option...) If the Zabbix server in Server Room A goes down, the one in Server Room B becomes active (and vice versa). Ditto for the MySQL servers/instances. If either of those cases happen, however, the connection between the Zabbix server and the MySQL server becomes significantly slower as ti has to travel over WAN. Question Is it possible to configure the Heartbeat/CoroSync pair to instruct the MySQL/Galera cluster to change the master node to switch to (if available) the one that's in the server room as the active Heartbeat/Corosync -node and (more challengingly) is it possible to do the same in the other direction, i.e have the Galera cluster change the active Heartbeat/CoroSync server to be in the same room as the active MySQL master server in case of a failover in over to avoid unnecessary WAN transfers between the application and its DB? Theories Most likely I can get CoroSync to run something that'd log in to one of the DB nodes to change the MySQL/Galera master but I don't know if it's really possible to do anything similar in the other direction in Galera. Is it possible to define a "service" in CoroSync/Heartbeat so that both the service and its MySQL service would migrate as one if possible. Using the DB server that's behind WAN should still be a better option to DB downtime. Am I just using too many tools to solve a problem that'd be far simpler with something else?

  Read the article

• vmware windows7 professional changing ip addresses

  - by chris hough

  is there a way to fix your windows 7 professional guest host os ipaddress so it does not change every time you startup? I am currently using NAT for networking and would like to remain using this networking method if possible. In older versions of windows this never used to be a problem in vmware so I am wondering if I am missing a setting in windows 7 professional or in vmware. thank you for your help, chris

  Read the article

• Changing administrator for hosted Exchange account

  - by RussSchick

  We are using a hosted MS Exchange provider, and they claim that our account can only have one administrator. They also claim that they cannot change which login is granted administrator privileges. This means that the user account that was initially created five years ago is the only account that can change our billing information, among other things. The employee associated with the current admin account is no longer with the company, so we'd like to move the admin privileges to a new "sysadmin" account, and delete this employee's account. Shouldn't this be really easy to do? Is my hosted exchange provider telling the truth?

  Read the article

• Windows: Making Windows Explorer distinctive (changing background color or file/folder icons) for specific folder

  - by MacGyver

  Is there a way to change the background color in Windows 7 and Windows Server 2008 when the current folder being displayed meets a certain condition? Or is there a way I can change the icons of the files and folders within that folder so it's distinctive--similar to how Tortoise SVN does it for code checked out from a repository? Why? I'd like to do this for a deployment directory on a live server so users don't accidentally commit code to a certain environment. Like myself. :-)

  Read the article

• How do I keep gnome-terminal width from changing when I use "reset"

  - by monguin

  When I use reset in gnome-terminal (bash, Ubuntu 9.04), the window width resets, though the height does not. On my personal computer, this does not happen in xterm or konsole. On my work computer (RHEL 5 or maybe 4), this does not happen in any terminals, including gnome-terminal. I assume there is some environment variable that controls this, but my .bashrc at work is hundreds of lines long, so I'm not sure where to look in there.

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• Debian Harddrive Fdisk - Same ID's and changing letters

  - by James Willson

  I am trying to create and install a debain NAS and ive been having a hard time because I am new to all of this. I used ntfs-3g in order to automount my 4 NTFS drives. I also have a partitioned harddrive which is for the OS. When I was working on it and I ran this command I got this: fdisk -l /dev/sdae1 fdisk -l | grep NTFS /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 The weird thing is, all of the NTFS harddrives listed had an ID of 7. The next time I boot up my machine, I get an error about mounting /dev/sda1 and I run this command, and get the following results: fdisk -l | grep NTFS /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 I havent plugged in any drives, so whats going on? How to I make sure that my drives are mounted with the same sdXX name every time, and is the reason for this because they dont have unique ID numbers, if so, how do I solve this?

  Read the article

• Why is Google Home page changing spontaneously

  - by Bob

  Periodically, my Google Chrome home page (which I have originally set myself) changes spontaneously on opening the browser to display, instead, the page showing the rectangular small images of webpages I have visited before. In addition the bookmarks bar and my homepage icon has disappeared. I am also not directed to any other website location as might occur if a virus or malware were involved. I can correct all of these changes back to my original settings the way I prefer (and nothing prevents my resetting it) and can continue to browse with no difficulty but this changed situation has happened several times in the past month. I had assumed that this was an idiosyncrasy of how Chrome (mis)behaves but worry whether virus or malware might be involved. I have monitoring by antiviral and antimalware software and run periodic complete scans and occasionally these find Trojans and other malware which are removed but this browser behavior seems to recur I would like to prevent the surprises Thank you.

  Read the article

• NIC: Changing Link Speed & Duplex to Full Duplex Is Drastically Slower

  - by rism

  I have an old Win Xp box with a 100 PRO/100 VE NIC and connecting to a Win 7 box with gigabit NIC via an ASUS gigabit router and peer to peer. I was getting 76% network utilisation on the XP machine using AUTO as the value for Link Speed and Duplex which is fine. But I decided to see what would happen if i selected Full Duplex 100Mbps on the XP box. I thought at worst it would be as good as auto detect since the Win 7 box it's transferring to is faster. Instead network utilisation dropped to 0.12% (as in a 10th of a percent) and the transfers just timed out. No biggie to reverse back to Auto but my question is why is full duplex such a dog? Im not "stuck" but just dont understand. There are only 2 machines here connecting through a router so i cant see how that would cause alot of collisions etc (if thats the problem).

  Read the article

• Cannot log into Windows XP Embedded after changing computer name

  - by bignis

  Hi everyone, I purchased a tablet pc running Windows XP Embedded. The tablet was used in a medical clinic on a domain. For illustrative purposes, say the computer name was "COMPLEXCOMPUTERNAME". There was an administrator account, so I changed the password on account "COMPLEXCOMPUTERNAME\Administrator" to a blank password. I logged out and logged in successfully with the blank administrator password when the log-in dialog said "Log in to COMPLEXCOMPUTERNAME (this computer)". Next I renamed the computer from COMPLEXCOMPUTERNAME to SIMPLECOMPUTERNAME, which required a reboot. I did so, and I can't log in anymore. The log in screen still just says "Log in to COMPLEXCOMPUTERNAME (this computer)", but the account "COMPLEXCOMPUTERNAME\Administrator" no longer works. I suspect that this is because the computer has been renamed to SIMPLECOMPUTERNAME and it can no longer find the account. The "Log in to" dropdown can't be typed in, so I can't change the computer name Windows is trying to log into. I fear that I'm stuck. Is there a way I can get Windows to log into the computer name that I chose? Thanks! -Mike

  Read the article

• Window 7 Computer name changing on its own?

  - by DC

  Very odd problem... I have a Dell Latitude D830 with XP Pro that has been running on my local domain for many years. I recently Installed Windows 7 Enterprise on the D830 using a brand new HDD so that I could still use XP if I needed by just swapping out the HDD's. I added the W7 installed system to my domain using a completely different machine name than that used for the XP system and everything seemed to be functioning as it should. On boot up over the last 2 weeks or so I occasionally (3 times now) get to the login screen and try to login to the domain only to get an error saying that the Computer name is not a trusted machine in the domain I'm trying to log in to. Come to find out that the machine name on the W7 system has been changed somehow to that of my old XP system. If on the W7 system I then change the name back to the correct name, disjoin the domain, reboot, add the machine back into the domain … all is well for an unknown period of time until this happens again. This last time, I know for a fact that everything was fine the day before when I shut down the system. I came in today, powered up the system and the machine name had been changed to that of my old XP system again. Has anybody else seen this behavior or hav any ideas on what could be causing it? Thanks!

  Read the article

• Why is changing displays slow?

  - by Josh Bronson

  I've had many laptops over the course of many years, and while many things have sped up, one thing remains as slow today as it was years ago: (dis)connecting an external display. What's taking it so long to detect the new display and update the pixel buffers? I use Macs primarily, but I think this is equally slow on other platforms.

  Read the article

• Changing the Windows authentication users allowed to access SQL Server

  - by ladenedge

  This seems like a question that should be common enough, but I can't find anything on it. Two questions, really: How can I determine which account(s) have Windows authentication access to an instance of SQL Server 2008? Can I change that set of users without being able to log in to the SQL Server instance? Thanks very much in advance!

  Read the article

• Changing the partition icon for Boot Camp

  - by zneak

  Hey guys, I've installed Windows 7 for a dual-boot setup on my new Core i7 MacBook Pro. Now, just for the looks, I'd like to change the volume icon. The partition is in NTFS format. I remember that in the past (with Leopard), you just had to add a .VolumeIcon.icns file at the root of a volume to set its icon. It seems this trick wore off with Snow Leopard. It apparently still works with CDs and DVDs, but hard drives keep that old, boring drive icon, no matter how lovely the .VolumeIcon.icns file I've put at the root. How can I change that?

  Read the article

• Lost contact with my NAS after changing its IP

  - by Beles

  I did some brain-dead reconfiguring of my D-Link DNS-323 NAS some days ago. I have a home network where each computer gets a dynamically allocated IP address starting at 192.168.1.100. The irritating point (for me at least) was that the NAS changed IP if the power went down or I turned off the router. I then had to remap a drive-letter to point to the new IP address of the NAS. To remedy that I configured the NAS to have a static IP, 192.168.0.10. I had no good reason to choose that IP, other than I found it in a user manual for the NAS. After I changed the IP and rebooted the NAS it disappeared from the network and was never to be found again. Now I have a black brick standing in my home, looking good, but "dead". Could anyone point me in a direction which helps me solve this problem? I have about 100gb worth of pic of my children on this brick so I really want it back :-) Sincerely,

  Read the article

• Changing the character encoding of a MySQL database

  - by Julien Genestoux

  Our whole application is now able to handle UTF-8 and it will be our choice in terms of encoding all across our architecture. The last step is to change the encoding of our MySQL databases. Of course, ALTER TABLE db_table CONVERT TO CHARACTER SET utf8 COLLATE utf8_general_ci; should be able to convert each of the tables to the right UTF8 encoding, yet, is there anything else I should do? I believe that the my.cnf configuration file needs to be changed as well.

  Read the article

• Changing my PC's motherboard

  - by Shyam

  I have a Asus A7N266 motherboard currently with a Athlon XP 1.8GHz processor that I assembled in 2002. The Video RAM for this is just 32 MB. I would like to upgrade my motherboard and retain the Processor. Is that advisable? If so, could you also suggest a good motherboard that has a better VGA capability?

  Read the article

• Stop windows-7 explorer taskbar icon changing for different locations

  - by Timothy Kane

  If I open an instance of Windows Explorer, a button appears on the taskbar; its icon matches the icon of current location in Explorer. E.g. If I've clicked on a drive (e.g. C:) then the taskbar icon changes to the drive icon. If I select the Pictures Library location, the taskbar icon changes to a little picture symbol. How can I stop this behaviour, so that the taskbar icon always shows the same icon, regardless of where I've clicked in Explorer?

  Read the article

• Changing encryption settings for Microsoft Office 2010/2013

  - by iridescent

  Although there are Office 2013 settings to change how encryption is performed, when you encrypt Open XML Format files (.docx, .xslx, .pptx, and so on) the default values — AES (Advanced Encryption Standard), 128-bit key length, SHA1, and CBC (cipher block chaining) — provide strong encryption and should be fine for most organizations. Quoted from http://technet.microsoft.com/en-us/library/cc179125.aspx . I can't figure out where is the setting to change how encryption is performed. Is there any possible to change the encryption algorithm being used instead of the default AES-128 ? Thanks.

  Read the article

• changing user in ubuntu

  - by Rahul Mehta

  Hi , this is my ls -all, the zfapi folder have the root right , how can i change this to www-data. Also Please advise what is the first root and secont root is ? Thanks drwxr-xr-x 4 www-data www-data 4096 2011-01-06 18:21 cdnapi -rw-r--r-- 1 www-data www-data 678 2010-08-30 12:02 config.js drwxr-xr-x 4 www-data www-data 4096 2010-11-23 15:55 css drwxr-xr-x 7 www-data www-data 4096 2010-11-17 13:12 images -rw-r--r-- 1 www-data www-data 25064 2010-12-17 18:26 index.html -rw-r--r-- 1 www-data www-data 19830 2010-12-18 11:24 init.js drwxr-xr-x 2 www-data www-data 4096 2010-12-02 12:34 lib -rw-r--r-- 1 www-data www-data 18758 2010-12-06 18:00 styles.css -rw-r--r-- 1 www-data www-data 1081 2010-10-21 17:56 testbganim.html drwxr-xr-x 2 www-data www-data 4096 2010-12-17 11:15 yapi drwxr-xr-x 7 root root 4096 2011-01-07 18:20 zfapi

  Read the article

• How to copy a windows 7 user profile when changing domains

  - by Kris

  I need to connect my machine to a new domain soon. When I do so a new user profile will be created and I would like to copy all the settings/data from the old profile to the new one. This is a local profile only (no roaming). Running Windows 7 Enterprise 64 bit. I found this previous question on the same topic, it however only seems to address Windows XP and the solutions do not seem to apply to Win7.

  Read the article

• grep changing the delimiter

  - by jhon

  any way we can change the delimiter that uses grep? I think, by default, grep uses '\n' as the delimiter. thanks.

  Read the article

• Changing Flash player of Firefox cache

  - by Prasenjit Chatterjee

  I want to relocate the Flash player plugin of Firefox cache so that it saves my C: drive space when I watch youtube videos. I successfully changed the firefox cache by opening about:config and then created a new string key "browser.cache.disk.parent_directory" where I put the value of the new cache location. But it doesn't work with online streaming contents such as youtube videos. Please guide me where does it get stored and how to change its cache into another drive.

  Read the article

• Changing bounds of excel file embedded in powerpoint

  - by Brett

  When I embed an excel files into powerpoint, I'm having two issues. On some of the spreadsheets, empty columns are displayed on the right hand side of the powerpoint slide On other spreadsheets that are too large to fit, I can't adjust the bounds of what I'd like to be displayed on the slide. So, I couldn't choose a larger area to display of the excel spreadsheet and just size it down. It arbitrarily chooses where to cut off the excel spreadsheet on the slide. Is there any way to adjust which part of the excel file is embedded?

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >