Search Results

Search found 2602 results on 105 pages for 'dell vostro'.

Page 14/105 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Dell Inspiron 1501 battery no longer "recognized"

  - by mwalling

  My parents were on vacation last weekend and franticly called me saying that they couldn't get their Inspiron 1501 to boot anymore without the BIOS whining about the battery. Before this happened, they said the "battery went dead with negligible pre-warning". On bootup, the computer says: WARNING: The battery cannot be identified. This system will be unable to charge this battery. With options to enter the BIOS or continue booting. I got to look at the machine last night. The battery still holds a charge, and will recharge. Windows detects it as a DellPY9617 battery manufactured by "DynaPack". I didn't get the BIOS revision, but the machine's ship date was 7/21/2007. The recommendations I could find on the internet varied from "discharge the battery completely" to "your computer is too old" to "update the BIOS", and wanted a more specific answer before doing something drastic.

  Read the article

• Windows Vista freezes

  - by Kakurady

  Windows Vista (32-bit) would randomly freeze on my computer, usually 15-30 minutes after login but can happen just after login. All applications would stop responding and the hard drive will not make any sound, and after a while, the mouse cursor will also stop moving. I dual-boot Ubuntu, and that still works fine. It started with the computer freezing when loading Team Fortress 2. Alt-Tab and Ctrl-Alt-Del have no effect, and the hard drive does not make any sound. I tried to verify the game data using Steam and that freezes the computer too. So I stupidly reinstalled the game. Now the game doesn't freeze when it starts, but instead the whole computer randomly freezes. This computer is a Dell XPS M1530 with a 320GB (298GiB) drive (WDC WD3200BEVT-7) split 5-ways, with Windows and Linux a partition each, one more for Linux swap space, and another two partitions for Dell diagnostic program and factory image and drivers. There was once where the hard drive would make clicking noises all day, and only stopped when I rebooted the computer. Since then, the BIOS diagnostics would fail the drive (for "self-test log contains previous errors") whenever ran. (The on-disk diagnostics cannot be run because I overwrote the MBR with GRUB.) Naturally, I thought the hard drive could be the problem. CHKDSK found one bad sector, but this seems to have no effect. System File Checker found two protected files with wrong hashes, one is some kind of IE manifest, and the other is a tcpmon.ini. Neither of them can be restored because their back up copy also have wrong hashes. Nothing about system failures in the event viewer. What should I do next?

  Read the article

• Function keys require Fn modifer. How can I make them default?

  - by RickMeasham

  On my Dell Studio 15, the function keys, by default, do things like switch the radio on/off or change the brightness or sound. To use them as function keys I have to hold down the Fn modifier. I use function keys as function keys a lot more often than I want to change the volume or brightness. Am I missing an obvious setting somewhere in the control panel (Vista Uber Extreme Something)?

  Read the article

• How do I get the Touchpad Settings working on a Dell XPS 13" Ultrabook?

  - by Dennis Wisnia

  Today I got an brand new Dell XPS 13 and I really like it. Wifi/Bluetooth/Brightness works very well. But only the Touchpad makes me insane. Okay, Multitouch is really nice and i love it on my Macbook but... i must click to click. How can I set up that is an "touch" to click? Its makes me insane. click, click, click.. Can I configure it? Update: I checked the proc/devices and got: I: Bus=0011 Vendor=0002 Product=0005 Version=0000 N: Name="ImPS/2 Generic Wheel Mouse" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input11 U: Uniq= H: Handlers=mouse0 event11 B: PROP=0 B: EV=7 B: KEY=70000 0 0 0 0 B: REL=103 Its really bad - and anyone have an Idea that Ubuntu thinks that is an Touchpad??

  Read the article

• Dell M6800 with Windos 8.1 on part-1, cannot run if Ubuntu and Fedora are 2nd and 3rd OSsen?

  - by user289334

  On a Dell M6800 machine that has Windows 8 pre-installed, I upgraded to 8.1, then I loaded Ubuntu 14.04 then Fedora 20 the only way I could, that is in "Legacy" BIOS Mode. BTW the Ubuntu install was unable to complete but Fedora did, and left all working, 2 bootable OSsen, with Grub2 from Fedora doing the boots, but Windows 8.1 is now "invisible". I have run Boot-Repair but info is not useful. It tells me to switch to UEFI which, on M6800, doesn't work with this (too long-winded to explain why here). I need to have the Grub2 configs "see" the original Windows 8.1 partition, with BIOS switched to "Legacy". BTW various posts have said make switch to UEFI to boot from, say, USB-stick or DVD; this is wrong, you can't - UEFI mode only allows boot from the Windows partition, which it says has a Windows 8.1 on it, which doesn't boot. Basically, if you have actually succeeded in loading Ubuntu 14.04 or Fedora 20 on an M6800, which comes with pre-loaded Windows 8, you will know how I fix this.

  Read the article

• Intel hd or Mobility Radeon?

  - by Absolute0

  I have decided to get a new Dell Studio 15 laptop. They have an option of adding a "ATI Mobility Radeon™ HD 4570, 512MB" card for an extra $100 instead of the included "Intel HD Graphics" card. How do the two compare? The laptop comes with an Intel Core i3 processor, maybe the Intel graphics card would be more compatible with the processor since they're made by the same manufacturer? Thanks in advance!

  Read the article

• Dell Inspiron N5110 Battery lasts only for 1.5 hours as opposed to 4 hours on Windows 7

  - by ubuntufan

  I've a Dell Inspiron N5110 laptop with the following specs: i5 processor 4 GB RAM NVIDIA GeForce GT540M Ubuntu 12.04LTS My laptop is overheating and the battery is lasting for only about 1.5 hours. I had checked if the battery indicator was problematic but it turned out it wasn't. I drained the battery to it's least possible value and that came to around 1 hr 40 minutes. In fact, I've the same problem with Debian and Xubuntu as well. I would like to get some proper solution for this. FYI: I've been having this problem since Ubuntu 11.04 but I'm not able to solve this in spite of trying various fixes like reducing brightness, Removing startup apps, Updating kernel and what not?. I'm a big fan of Ubuntu but this problem is stopping me from using Ubuntu and I'm using Win7 for 90% of the time.

  Read the article

• How to get hibernate working on Windows 8?

  - by A T

  I have been using Windows 8 x64 Developers Preview as my primary OS on my laptop. Unfortunately I have been unable to enable hibernate (tried through registry and through powercfg.cpl). The closest I have got is that I was able to enable hibernate on pressing of power button, but that just turns of screen and keeps everything else running, I have to force shutdown to do anything. Do you know how I can get hibernate to work on my Dell Studio 17?

  Read the article

• Why does my fan run so hard on my Dell XPS 15z?

  - by Kilhoffer

  I recently bought a Dell XPS 15z. It came with Windows 7 Home Premium, but I really wanted to try out Ubuntu on it. I ran the Windows installer and was surprised how smooth the process was. Within 10 minutes, I had a dual boot setup with Ubuntu 11.10. It boots into Ubuntu just fine and everything seems to work. I've read a lot about problems with touchpad and wireless, but honestly, I've had none of those issues. The only thing that's really bothering me is the fan constantly runs fast. Under Windows, it rarely ever came on and when it did, it wasnt spinning that fast. What could be going on under Ubuntu that would cause this? I want to get that under control because I want to use Ubuntu as my primary OS and screw Windows. Any help would be much appreciated! Note: I've read that others have set acpi=false, but I have not made any changes to the default installation. Should I make that change?

  Read the article

• How do I get a Dell Latitude e6420 working?

  - by David_G

  I've just installed Ubuntu 12.04 (64-bit) on a brand new Dell Latitude e6420, and I'm having a few problems. This laptop has an Optimus (?) setup - i.e. integrated gfx and an Nvidia Quadro NVS 4200M. First problem - I ran setup, etc, and discovered that I can only run unity2d - If I try and login with unity3d, it just defaults to 2d. This is with nvidia-current installed (302.07). Note also that I can't run nvidia-settings ("You do not appear to be using the NVIDIA X driver."), and there is no additional drivers found ("No proprietary drivers are in use on this system"). I tried to troubleshoot this, and removed nvidia, leaving (I guess) just Nouveau drivers - In that case, unity3d did work, but I was stuck with the open source Nouveau drivers powering the integrated graphics. So, obviously, I want to run unity3d, and be using the more powerful Nvidia graphics card. I've tried a bit of tinkering around, but I'm not sure the best way to proceed, or perhaps more importantly, I'm not sure of what the best final solution might be. I've heard about bumblebee - but frankly, I would prefer to have the proprietary Nvidia drivers working properly. Any help would be much appreciated!

  Read the article

• Can't Remote into Windows Server

  - by Brian

  Hello, I have a Dell server wired into the router. I was able to connect to it with my laptop (laptop is wireless) before my router died. My verizon router went kaput, and I got everything else back up and running on the wireless network other than the remoting in feature, even though I can access the server through windows explorer just fine. Any ideas why? What do I need to check? UPDATE: Interesting scenario, Network Discovery is off; I turn it on and save, but for some reason, even after that, network discovery is turning itself off... no idea why that is happening? Thanks.

  Read the article

• Bluetooth light not turned on and bluetooth also not working on vostro 1014

  - by Dinesh Kumar

  after running following command dmesg | grep -i bluetooth [ 17.106250] Bluetooth: Core ver 2.16 [ 17.107845] Bluetooth: HCI device and connection manager initialized [ 17.107847] Bluetooth: HCI socket layer initialized [ 17.107849] Bluetooth: L2CAP socket layer initialized [ 17.107857] Bluetooth: SCO socket layer initialized [ 18.853255] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.853260] Bluetooth: BNEP filters: protocol multicast [ 18.859350] Bluetooth: RFCOMM TTY layer initialized [ 18.859355] Bluetooth: RFCOMM socket layer initialized [ 18.859357] Bluetooth: RFCOMM ver 1.11 [14998.338293] init: bluetooth main process ended, respawning

  Read the article

• Register for windows Upgrade Offer from Windows 7 to Windows 8

  - by BumbleBee

  I have to register for windows Upgrade Offer from here. I purchased Dell Inspiron 5520 laptop before 2 weeks and I got windows 7 Home Basic in it. But now I want to register for windows upgrade offer, When I filled up registration form and submit then it displayed that I am not eligible for this kind of offer. I don't know why this message is displaying although I bought laptop in between eligible time period. I think, I was filling wrong details in form. Because I am not sure about what to fill in Retailer's Name, Purchase Date and PC Model. And one thing is how to find right purchase Date from my product's Service Tag ? Which date I have to fill in form, Shipping Date OR Manufacture Date? Please Provide me a right direction to register and correct information regarding Retailer'Name and Purchase Date and PC Model.

  Read the article

• continuous hard disk access - slowing down my machine

  - by suresh

  I find from the hard disk access LED on the front of my machine that the hard disk is being accessed more often and probably because of that, my machine is quite slow. The machine becomes unresponsive even when the load as seen from w command is around 1 or so. My desktop is optiplex 360 dell machine running Ubuntu 10.04. My questions are: How to quantify hard disk access and how to see if it is more than "normal" ? If it is more than normal, what are my solutions ? thanks suresh

  Read the article

• Enter / Return key stops working

  - by andygrunt

  I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to?

  Read the article

• servers connected to a poweredge 6248 receive traffic for their 'neighbours'

  - by Hannes

  In the network we have a few vlans but at the moment I was investigating vlan2 which carries the most traffic. When tcpdumping on the eth0.2 interface, I see a lot of packets arriving which are not addressed to, nor coming from the server. I checked this on several servers in the network and they all have the same issues. In short, our switches don't switch the traffic but threat it like they are a hub. Can you tell me what settings on the dell poweredge 6248 should prevent this behaviour?

  Read the article

• Enter / Return key stops working

  - by andygrunt

  I have a Dell Latitude E5400 laptop running Windows 7. Everything runs fine on it for days then I suddenly notice the enter/return key is no longer working e.g. I could be writing an email, press enter for a new line but it doesn’t ‘register’ – so no new line. I thought it might be some dirt under the key perhaps so I tried running the Windows onscreen keyboard but the Enter key on that doesn’t work either. A reboot always fixes the problem but it’s a pain. Any ideas a) how to fix it and b) out of interest, is there some other key combination that I can use as an alternative to using the Enter key when I need to? UPDATE: Thanks to CarlF's suggestion, I tried exiting running programmes and found it seems to be a problem with PhraseExpress.

  Read the article

• Can't Remote into Windows Server

  - by Brian

  Hello, I have a Dell server wired into the router. I was able to connect to it with my laptop (laptop is wireless) before my router died. My verizon router went kaput, and I got everything else back up and running on the wireless network other than the remoting in feature, even though I can access the server through windows explorer just fine. Any ideas why? What do I need to check? UPDATE: Interesting scenario, Network Discovery is off; I turn it on and save, but for some reason, even after that, network discovery is turning itself off... no idea why that is happening? Thanks.

  Read the article

• How do I get wireless working on a Dell Inspiron 510m?

  - by user17449

  Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

  Read the article

• Dell Management Packs in System Center Operations Manager 2007 R2?

  - by bwerks

  Hey all, I recently set up SCOM in a small business network environment. The root management server is a Dell Poweredge 2950, and I'd like to use SCOM to monitor it using Dell's management packs. I've imported the management packs into the SCOM deployment and followed Dell's installation instructions, but it doesn't seem to be fully working yet. Currently, the Diagram views in the Dell tree (Monitoring tab) seem to show me the server's place in the network topology, so it seems that at least part of it is working. However, none of the reports under "Performance and Power Monitoring Views" provide any information. When clicking on one of them (Power Consumption (Watts), for instance), the display area is blank and there is a tooltip visible that reads "No performance counter is selected. To select a counter, place a check mark in the Show column in legend below." However, in the legend, there's nothing there for me to check. I've installed OpenManage 6.2 on the server as per the Dell documentation, but I don't know what else I could have done that I missed. Does this sound like a familiar problem to anyone?

  Read the article

• After a week of smooth running, my Dell t310 servername reverted to the service tag and screwed everything up!

  - by user779887

  Has this happened to anyone else? Began having a tremedous amount of problems with our brand new Dell SBS 2011 T310 server and after nearly 15 hours will Dell support, they determined that the server name hade reverted to DXXXXXXXX ("D: + the service tag). The Dell tech said that this was a major major problem. I'm the only person with any access to the machine and I didn't attempt to change the server name. The tech said it didn't look as if anyone had hacked the box but something had replaced "OurCompanyServer" with "DXX12XX" It would seem to me, simply changing the server name back to what I originally had would correct the problem, but the Dell tech said it wasn't that easy. Anyone encounter this?

  Read the article

• Lubuntu wireless issue with Broadcom chipset

  - by Variant Web Solutions

  I'm a web dev that just started a new venture in buying wiped laptops in bulk and selling them at a low cost to lower income families that want a laptop that will simply preform and not become virus ridden and require constant maintenance, so naturally I opted for a linux distro and after some research, lubuntu was my top pick. I'm not a stranger to linux as all of my servers for my web dev business are linux, but I am however new to L/Ubuntu and I'm having some issues with both wifi (broadcom chipsets) on the 20 or so dells that I have right now, D800's, D810's and E5400's. Not sure if you can point me in a solid direction, I've scoured (and implemented) the suggestions on ask ubuntu and still coming up short. On one of the e5400's ( though they all seem to suffer the same errors) I got the following: [code]dell-latitude-e5400@dell-Latitude-E5400:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell-latitude-e5400@dell-Latitude-E5400:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10) dell-latitude-e5400@dell-Latitude-E5400:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.5-1ubuntu1 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm nfc dell-latitude-e5400@dell-Latitude-E5400:~$ [/code]

  Read the article

• How do I toggle the wifi hardware switch for a Dell XPS 17 L702X?

  - by Sparhawk

  Every now and then, I disable my wireless via the menu icon in Ubuntu. Then, when I try to enable the wifi, it tells me that "wireless is disabled" or "wireless is disabled by hardware switch". There is a red icon on the F2 key that looks like a wireless icon, and in Windows, pressing the (red) Fn key and F2 toggles the wifi. This does not work in Ubuntu, leaving me no clear way to turn wifi back on. How can I restart wifi in Ubuntu?

  Read the article

• How to monitor RAID in Solaris 10 x86 on PowerEdge 2650 with PERC 3/Di

  - by cope360

  I have a PowerEdge 2650 with the PERC 3/Di RAID controller. The OS installed is Solaris 10 8/07 U4. Currently RAID is configured through the BIOS and it works fine, but I have no way to monitor the status of the drives. Is there a command to show me the status of the drives? Drivers I need to install?

  Read the article

• How to configure SCSI hard drives and RAID for Poweredge 2850 web server

  - by Saul

  I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >