Search Results

Search found 988 results on 40 pages for 'josh pearce'.

Page 14/40 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Ubuntu PowerEdge T110

    - by Josh
    I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

    Read the article

  • Can you run Android 2.2 Froyo or 2.3 Gingerbread in a VM?

    - by Josh B
    I came across a how-to guide for running Android 1.7 in a virtual machine (VirtualBox), but 1.7 is old. I haven't been able to find a Android 2.2 or 2.3 image anywhere, does anyone have any ideas on how to virtualize newer Android OS's? Preferably a free virtualization solution like VirtualBox. Here is the link about virtualizing 1.7: http://osxdaily.com/2010/12/14/run-android-using-a-virtual-machine-on-a-mac-or-windows-pc/ They send you to here to download Android disk images: http://virtualboxes.org/images/android-x86/ But I can't find anything newer than 1.7, anyone have any ideas? Is this considered illegal or piracy is that why there are no images available? Thanks for help!

    Read the article

  • Secure email crashes Outlook 2007

    - by Josh
    I have a number of secure emails sent to my Outlook 2007 client. Most arrive fine and display the prompt with regards to granting access to the certificate and then open. Today I received two that crash Outlook whenever I try to open them. I've tried restarting Outlook and my computer but still have the same problem. Any ideas what might be causing this, and how I can fix it? I'm working on Windows Vista Ultimate 64-bit.

    Read the article

  • Recommendations for stable, reliable flash drives

    - by Josh Kelley
    We're looking to purchase some flash drives for use in some embedded devices. Most of our requirements aren't too different the generic "good, fast" flash drive: reliability is very important, speed is good, and so that the drive will fit, the case shouldn't be too large (so no OCZ Throttles). Consistency is also a major priority; we'd like to be able to buy more or less the same product a year or two from now without having to worry about the manufacturer swapping drive components with less reliable or slower parts. (We've been burned already by our previous manufacturer doing this.) Any recommendations, especially regarding consistency? I can read Ars Technica to get an overview of current models, but what are consistently good models?

    Read the article

  • What is the safest and least expensive way to store 10 terabytes of data?

    - by Josh T
    I'm a member of a production company and we're preparing for our first feature film. We've been discussing methods of data storage to keep all of our original content safe (for as long as possible). While we understand data is never 100% safe, we'd like to find the safest solution for us. We've considered: 16TB NAS for on-site storage 4-5 2TB hard drives (cheap, but not redundant), copy original footage to drives then seal in static free bag Burn data to Blu-Ray disks (time consuming and expensive: 200 disks == $5000) Tape drive(s)? I know the least about tape drives, except the fact that they're more reliable than disks. Any experience/knowledge with this amount of data is hugely appreciated.

    Read the article

  • Install-SPSolution : This solution contains no resources scoped for a Web appli cation and cannot be deployed to a particular Web application

    - by Josh
    I have a PowerShell script that deploys about 12 web parts. They have all been created through Visual Studio 2010 and are being deployed to SharePoint 2010. I am getting the following error when running Install-SPSolution for one of my web parts: Install-SPSolution : This solution contains no resources scoped for a Web application and cannot be deployed to a particular Web application. Can someone help me debug this? Every other Install-SPSolution command uses -AllWebApplications, and I do not want to specify the web application directly using -URL. Here is the command that is breaking (this is the same command used to successfully deploy all 11 other web parts): Install-SPSolution –Identity PortalSelector.wsp -AllWebApplications -GACDeployment

    Read the article

  • Picking up a lot of failed authentications for various accounts

    - by Josh K
    My server is getting a lot of various failed authentication attempts for various accounts. The most common one (that I've seen ) or the root account. I have since enabled Fail2Ban and ran several rootkit / malware checks to ensure I wasn't compromised. Is there anything else I should do? I only have three accounts enabled, and SSH access for only two. I have a full 48hr ban on anyone making more then six failed SSH login attempts. I do not have FTP enabled.

    Read the article

  • Netbeans: Install/Activate/Uninstall/Deactivate plugins buttons disabled

    - by Josh
    I recently installed Netbeans 6.9 on a new computer. I went to install the NB Android plugin, which I have on another computer, but I found most of the functionality of the plugins window disabled. The install, uninstall, activate, and deactivate buttons are grayed out. I have included images at the bottom. This hasn't happened to me before, and searching Google hasn't turned up anything useful. I thought it might have been a permission problem so I tried running Netbeans with gksudo but that didn't help. I also thought it might have been something wonky with the Ubuntu Software Center install, so I uninstalled that one, and downloaded Netbeans from the main site and I installed it in my home directory, but it does the same thing. I'm running Xubuntu 10.10 and Netbeans 6.9.1 Available Plugins Tab It won't let me add more than one hyperlink due to a lack of reputation. Installed Tab - http + i.imgur.com/Nhqi4.png

    Read the article

  • Windows Service SearchIndexer.exe Crashes on Indexing

    - by Josh Jay
    Relevant Specs: Windows 7 Professional 64-bit SP1 Outlook 2010 Version 14.0.7116.5000 (32-bit) Original Symptom: In outlook, I attempted to search for an email but nothing ever returned and the indicator kept going like it was searching. Attempted Resolutions: I investigated the search options and with some research noticed the Windows Service "Windows Search" (SearchIndexer.exe) was not running. I attempted to start it but I receive this error message: "Windows could not start the Windows Search service on Local Computer. Error 1067: The process terminated unexpectedly." The Event Viewer gives this error entry: Log Name: Application Source: Application Error Date: 6/3/2014 11:02:05 AM Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: ***REMOVED FOR POST*** Description: Faulting application name: SearchIndexer.exe, version: 7.0.7601.17610, time stamp: 0x4dc0d019 Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677 Exception code: 0xc0000005 Fault offset: 0x000000000000940d Faulting process id: 0x6a0 Faulting application start time: 0x01cf7f3cc83757c6 Faulting application path: C:\Windows\system32\SearchIndexer.exe Faulting module path: C:\Windows\system32\KERNELBASE.dll Report Id: 06424160-eb30-11e3-9555-843a4b07b336 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Application Error" /> <EventID Qualifiers="0">1000</EventID> <Level>2</Level> <Task>100</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2014-06-03T15:02:05.000000000Z" /> <EventRecordID>602923</EventRecordID> <Channel>Application</Channel> <Computer>M6700-12011.ncaa.org</Computer> <Security /> </System> <EventData> <Data>SearchIndexer.exe</Data> <Data>7.0.7601.17610</Data> <Data>4dc0d019</Data> <Data>KERNELBASE.dll</Data> <Data>6.1.7601.18229</Data> <Data>51fb1677</Data> <Data>c0000005</Data> <Data>000000000000940d</Data> <Data>6a0</Data> <Data>01cf7f3cc83757c6</Data> <Data>C:\Windows\system32\SearchIndexer.exe</Data> <Data>C:\Windows\system32\KERNELBASE.dll</Data> <Data>06424160-eb30-11e3-9555-843a4b07b336</Data> </EventData> </Event> The regular windows search (from start menu) works fine, and if I reboot the machine the service starts up OK but as soon as it kicks off when I let the machine idle for long enough it crashes (same Event Viewer entry). We also tried the Microsoft Utility to no avail. Has anyone seen this issue before?

    Read the article

  • Allowing non-admins to run programs as admins on Windows 7

    - by Josh
    On *nix, admins can use the setuid flag to allow non-admins to run certain programs that would otherwise require admin privileges. Is there any way to do something similar in Windows 7? This question has been asked here before for Windows XP, and the answers were generally unsatisfying. I'm wondering if Windows 7 provides a better way. One idea I can think of would be to use Microsoft's Subsystem for UNIX Applications, but I'd rather not install that on every user's system if I can avoid it. Another idea I can think of (which would work on XP too, but I haven't seen it mentioned anywhere) would be to create a RunAsAdmin application that runs as a service, that takes a whitelist of "safe" apps and can be asked (from a command line, batch file or script) to run any program on the list as LocalSystem or whatever account the service uses. Is this possible? Are there any solutions that aren't as clunky as those? Or, has anyone implemented either of the above techniques successfully?

    Read the article

  • Virtualmin: Automatically create SSL based website with a shared SSL wildcard cert?

    - by Josh
    I managed to configure this very nicely under cPanel/WHM, but I am having trouble configuring it under Virtualmin: when I create a new Virtual Server in Virtualmin, I want it to automatically create an Apache with a subdomain of a shared wildcard SSL domain. So for example, if I create a virtual server for some.example.com, I want two VirtualHosts: <VirtualHost 1.2.3.4:80> ServerName some.example.com ServerAlias www.some.example.com some_example.shared-ssl-domain.com ... </VirtualHost> <VirtualHost 1.2.3.4:443> ServerName some_example.shared-ssl-domain.com ... SSLEngine on SSLCertificateFile /path/to/shared-ssl-domain.com.crt SSLCertificateKeyFile //path/to/shared-ssl-domain.com.key SSLCACertificateFile /path/to/shared-ssl-domain.com.cabundle </VirtualHost> in cPanel/WHM I was able to do this easily because the template file contained the <VirtualHost> and </VirtualHost> directives. But Virtualmin's template does now. is there any way I can set up Virtualmin to do what I want?

    Read the article

  • ISPs with good upload speeds? [closed]

    - by Josh Comley
    I am a web developer, and I spend most of my time not waiting for downloads but waiting for my latest build of a website to publish to a test site. I use the excellent BeyondCompare to ensure I only upload what I need to upload. But still, if a 2MB C# DLL has changed, so be it. And I must wait. At work we host our own servers and have a dedicated line, so for 8.5 hours of my day I have blistering upload speeds across the web, which is nice. At home however, it's a different story. I am with Virgin Media on their XL internet package (I think). I think that means I get 256Kb upload and 20Mb download. So I have began to wonder - are there any ISPs in the UK with good upload speeds? If you know of any for other countries, do post for other's sake, but please specify which country your post is relevant to.

    Read the article

  • Why did my zpool replace never finish and what should I do now?

    - by Josh
    I have a ZFS zpool with two disks in a mirror configuration, da0 and da1. da1 failed, and so I replaced it with da2 using zpool replace BearCow da1 da2 This ran for a few hours, during which zpool status showed that the array was being resilvered. When that finished, zpool status showed that the resilver was completed, but the array was still degraded... I tried a zpool scrub and a zpool clear, but the array still shows as degraded: [root@chef] ~# zpool status BearCow pool: BearCow state: DEGRADED scrub: scrub completed after 0h20m with 0 errors on Tue Oct 9 16:13:27 2012 config: NAME STATE READ WRITE CKSUM BearCow DEGRADED 0 0 0 mirror DEGRADED 0 0 0 da0 ONLINE 0 0 0 replacing DEGRADED 0 0 0 da1 OFFLINE 0 0 0 da2 ONLINE 0 0 0 errors: No known data errors I can't zpool replace BearCow da1 da2 anymore because da2 is already a member of BearCow... This is FreeBSD (FreeNAS) running ZFS pool version 15. How do I get my array to show as healthy again?

    Read the article

  • How can I boot directly to a VirtualBox (.vdi) image (possibly via hypervisor)?

    - by Josh
    I have a system image in VirtualBox as a .vdi file. I am aware of how to convert this to other formats of VM using VBoxManage. I'd like to boot this image locally on a number of clients which currently have no OS installed. What's the simplest way to boot into this VM from bare metal? I'm willing to install some minimal OS if necessary. Is this even possible? Maybe there's something out there along the lines of VDI Blaster that will load a locally stored VM?

    Read the article

  • apache requests failing

    - by Josh
    I'm trying to figure out why sometimes the client fails to load objects/requests from a dynamic page served from Apache/MySql/Debian machine. Let's say 13 objects are to be loaded for a total of 185.3 KB load, with no external objects (no DNS lookups) and no other traffic at the same time, randomly some of those object do not load. However, if I perform a refresh, sometimes all of them load or some might fail again. I only have 1Mbps/up and my DNS is been hosted externally (everydns). What could be the reason of this issue? Any comments will be appreciated.

    Read the article

  • Random Computer Crashes

    - by Josh W.
    Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

    Read the article

  • Is SSL to the proxy good enough?

    - by Josh Smeaton
    We are currently trying to decide on how best to do SSL traffic in our environment. We have an externally facing Apache proxy server that is responsible for directing all traffic into our environment. It is also doing the SSL work for the majority of our servers. There are one or two IIS servers in particular that are doing their own SSL, but they are also behind the proxy. I'm wondering, is SSL to the proxy good enough? It would mean that traffic within our network is identifiable, but is that such a big deal?

    Read the article

  • Speakers will not work after I use USB Headset

    - by Josh K
    I am trying to configure my SteelSeries Siberia V2 Frost USB Headset to work with my 2.0 speakers using a jack. My goal is to find a easy way (no restart) to switch playback from my headset and my speakers and vice-versa. If i plug my headset in and make it the default device then restart my application/web page then the sounds works out of headset. If I switch the default to my speakers and restart apps/web pages then sound does not play. I know my speakers are on because if I configure them through windows and test, the sounds play, and sounds also play when I test it through my audio manager. Even if I unplug my headset, I still cannot get sound out of my speakers unless I restart My audio manager is RealTek HD Audio Manager, Windows 7 x64. I have tried the speaker back, usb front. speaker front, usb in front port. I have not tried speaker back, usb back.

    Read the article

  • Linux - What do the common root folder names mean?

    - by Josh
    I am rather new to linux, but I have installed a few different flavors. I noticed they all have similar folder names in the root directory bin boot dev etc home lib lost+found media mnt opt proc root sbin selinux srv sys tmp usr var I googled around, but couldn't find anywhere that explained the purpose of each of these. I understand a couple, but could anyone point me somewhere or give a quick breakdown of the common ones.

    Read the article

  • Having trouble keeping a 1GB RAM Centos server running

    - by Josh
    This is my first time configuring a VPS server and I'm having a few issues. We're running Wordpress on a 1GB Centos server configured per the internet (online research). No custom queries or anything crazy but closing in on 8K posts. At arbitrary intervals, the server just goes down. From the client side, it just says "Loading..." and will spin more or less indefinitely. On the server side, the shell will lock completely. We have to do a hard reboot from the control panel and then everything is fine. Watching "top" I see it hovering between 35 - 55% memory usage generally and occasional spikes up to around 80%. When I saw it go down, there were about 30 - 40 Apache processes showing which pushed memory over the edge. "error_log" tells me that maxclients was reached right before each reboot instance. I've tried tinkering with that but to no avail. I think we'll probably need to bump the server up to the next RAM level but with ~120K pageviews per month, it seems like that's a bit overkill since it was running fairly well on a shared server before. Any ideas? httpd.conf and my.cnf values to add? I'll update this with the current ones if that helps. Thanks in advance! This has been a fun and important learning experience but, overall, quite frustrating! Edit: quick top snapshot: top - 15:18:15 up 2 days, 13:04, 1 user, load average: 0.56, 0.44, 0.38 Tasks: 85 total, 2 running, 83 sleeping, 0 stopped, 0 zombie Cpu(s): 6.7%us, 3.5%sy, 0.0%ni, 89.6%id, 0.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2051088k total, 736708k used, 1314380k free, 199576k buffers Swap: 4194300k total, 0k used, 4194300k free, 287688k cached

    Read the article

  • What is preventing me from upgrading / installing Fixefox extensions?

    - by Josh
    I am trying to install a Firefox extension into Firefox 3.6.13 under OS X 10.5.8, and I keep getting an error message: Firefox could not install the file at because: Download error -228 I have read this and found it unhelpful. My cache is 500 MB and ~/Library/Caches/TemporaryItems is writable: [jnet@Stan ~]$ ls -la ~/Library/Caches/TemporaryItems total 16 drwx------ 5 jnet jnet 170 Jan 27 20:51 . Any idea how I can correct this?

    Read the article

  • Internet Problem: Wireless connected but no connection to internet

    - by Josh K
    Hey i have a interesting network setup on a laptop here and for some reason the internet isnt working. I am connected to a secure network via wireless router and taskbar says i am connected and with good signal strength but in my internet browser i cant connect to any websites, the error is: This webpage is not available. (Chrome) I am using Chrome, but websites dont work on IE either. Heres a little background on the setup i have. I have a Ethernet connected to the laptop with a static ip, and then i have the wireless setup with DHCP enabled. I am using the ethernet to connect to the network (for remote desktop) but the wireless for internet (to avoid the network firewalls). this set up has worked fine for a few months, but i cant figure out what is going on now. Might be worth it to note it is a Lenovo Thinkpad and i just uninstalled ThinkVantage Access Connections (as it was giving me ample problems prior to this one, which i consider a step up) Tried repairing connection as well, let me know if you guys have any ideas please! EDIT: Solved-Dead Modem in the server room.... Sorry guys didn't have access to that myself

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >