Search Results

Search found 170718 results on 6829 pages for 'not me'.

Page 14/6829 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • raid md device is not remove from memory, how to overcome this problem

    - by santhosha
    i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

    Read the article

  • Another sound not working post

    - by Thomas Smart
    Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

    Read the article

  • ASP.NET Routing not working on IIS 7.0

    - by Rick Strahl
    I ran into a nasty little problem today when deploying an application using ASP.NET 4.0 Routing to my live server. The application and its Routing were working just fine on my dev machine (Windows 7 and IIS 7.5), but when I deployed (Windows 2008 R1 and IIS 7.0) Routing would just not work. Every time I hit a routed url IIS would just throw up a 404 error: This is an IIS error, not an ASP.NET error so this doesn’t actually come from ASP.NET’s routing engine but from IIS’s handling of expressionless URLs. Note that it’s clearly falling through all the way to the StaticFile handler which is the last handler to fire in the typical IIS handler list. In other words IIS is trying to parse the extension less URL and not firing it into ASP.NET but failing. As I mentioned on my local machine this all worked fine and to make sure local and live setups match I re-copied my Web.config, double checked handler mappings in IIS and re-copied the actual application assemblies to the server. It all looked exactly matched. However no workey on the server with IIS 7.0!!! Finally, totally by chance, I remembered the runAllManagedModulesForAllRequests attribute flag on the modules key in web.config and set it to true: <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <add name="ScriptCompressionModule" type="Westwind.Web.ScriptCompressionModule,Westwind.Web" /> </modules> </system.webServer> And lo and behold, Routing started working on the live server and IIS 7.0! This seems really obvious now of course, but the really tricky thing about this is that on IIS 7.5 this key is not necessary. So on my Windows 7 machine ASP.NET Routing was working just fine without the key set. However on IIS 7.0 on my live server the same missing setting was not working. On IIS 7.0 this key must be present or Routing will not work. Oddly on IIS 7.5 it appears that you can’t even turn off the behavior – setting runtAllManagedModuleForAllRequests="false" had no effect at all and Routing continued to work just fine even with the flag set to false, which is NOT what I would have expected. Kind of disappointing too that Windows Server 2008 (R1) can’t be upgraded to IIS 7.5. It sure seems like that should have been possible since the OS server core changes in R2 are pretty minor. For the future I really hope Microsoft will allow updating IIS versions without tying them explicitly to the OS. It looks like that with the release of IIS Express Microsoft has taken some steps to untie some of those tight OS links from IIS. Let’s hope that’s the case for the future – it sure is nice to run the same IIS version on dev and live boxes, but upgrading live servers is too big a deal to do just because an updated OS release came out. Moral of the story – never assume that your dev setup will work as is on the live setup. It took me forever to figure this out because I assumed that because my web.config on the local machine was fine and working and I copied all relevant web.config data to the server it can’t be the configuration settings. I was looking everywhere but in the .config file forever before getting desperate and remembering the flag when I accidentally checked the intellisense settings in the modules key. Never assume anything. The other moral is: Try to keep your dev machine and server OS’s in sync whenever possible. Maybe it’s time to upgrade to Windows Server 2008 R2 after all. More info on Extensionless URLs in IIS Want to find out more exactly on how extensionless Urls work on IIS 7? The check out  How ASP.NET MVC Routing Works and its Impact on the Performance of Static Requests which goes into great detail on the complexities of the process. Thanks to Jeff Graves for pointing me at this article – a great linked reference for this topic!© Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7  Windows  

    Read the article

  • Flash is not working in Chrome

    - by Jim Ford
    I have google Chrome 8.0.552.237 on Ubuntu 10.10 64-bit and flash is not working, I have tried a variety of methods to install flash, including Firefox flash-aid and the flash-installer package and nothing is working for me. I have even uninstalled and reinstalled chrome to no avail. I get "missing plugin" message where flash plugin should be in a website. What am I missing? UPDATE I have a variety of plugins returned by jgbelacqua's command: /usr/lib/chromium-browser/plugins/flashplugin-alternative.so /usr/lib/firefox/plugins/flashplugin-alternative.so /usr/lib/flashplugin-installer/libflashplayer.so /usr/lib/iceape/plugins/flashplugin-alternative.so /usr/lib/iceweasel/plugins/flashplugin-alternative.so /usr/lib/midbrowser/plugins/flashplugin-alternative.so /usr/lib/mozilla/plugins/flashplugin-alternative.so /usr/lib/xulrunner/plugins/flashplugin-alternative.so /usr/lib/xulrunner-addons/plugins/flashplugin-alternative.so /usr/share/ubufox/plugins/libflashplayer.so /var/cache/flashplugin-installer/libflashplayer.so I'm not sure which is necessary and which not. I should note tho that my Chromium does have flash and it does work... just not chrome or firefox.

    Read the article

  • Internet key not always detected by the operating system

    - by Carlo Gisonni
    I've over the time, tried and installed several versions of Ubuntu. Those versions I like more than others are: Lubuntu and Kubuntu. Everything seems to work properly but the Internet key. I do not know if it may depends on the weather, the moonphase or the tides but the Internet key is not always detected by the system and is sometimes very difficult to establish a connection when I do need to connect to internet. Without applyng any change sometimes works sometimes not. I've so far not found the solution and I think is a quite strange behaviour of the operating system as if the settings are wrong, should never work Awaiting a kind answer from those of you willing to help.

    Read the article

  • Major Google not follow increase since introducing 301 to site

    - by jakob
    Recently we implemented Varnish in front of our web nodes so that the backend would get some rest from time to time. Since varnish is case sensitive and our app was not we implemented a 301 in varnish to redirect to small case. Example: You search for PlumBer StockHOLM you will get a 301 redirect to plumber stockholm and then plumber stockholm will be cached. This worked as a charm, but when checking the Google webmaster tools we suddenly got a crazy amount of Status - Not able to follow errors. As you can see in the image below: This of course stirred up some panic and I started to read up on the documentation once again. If I pressed on one of the links I got to the help section where i found this: Well this is strange, but as the day progressed more and more errors were thrown by Google. We took the decision to make varnish return 200 instead of the 301. Now when testing the links that appears in the Not able to follow section I get a 200 back. I have tested with Chrome, curl and lynx reader and everything looks ok but the amount of errors are still increasing. What is a little bit comforting is that the links that appears in the Not able to follow section are dated before the 200 change in varnish. Why do I get these errors and why do they keep increasing? Did google release something new on October 31? Maybe I do not understand the docs correctly?

    Read the article

  • openGL migration from SFML to glut, vertices arrays or display lists are not displayed

    - by user3714670
    Due to using quad buffered stereo 3D (which i have not included yet), i need to migrate my openGL program from a SFML window to a glut window. With SFML my vertices and display list were properly displayed, now with glut my window is blank white (or another color depending on the way i clear it). Here is the code to initialise the window : int type; int stereoMode = 0; if ( stereoMode == 0 ) type = GLUT_DOUBLE | GLUT_RGB | GLUT_DEPTH; else type = GLUT_DOUBLE | GLUT_RGB | GLUT_DEPTH | GLUT_STEREO; glutInitDisplayMode(type); int argc = 0; char *argv = ""; glewExperimental = GL_TRUE; glutInit(&argc, &argv); bool fullscreen = false; glutInitWindowSize(width,height); int win = glutCreateWindow(title.c_str()); glutSetWindow(win); assert(win != 0); if ( fullscreen ) { glutFullScreen(); width = glutGet(GLUT_SCREEN_WIDTH); height = glutGet(GLUT_SCREEN_HEIGHT); } GLenum err = glewInit(); if (GLEW_OK != err) { fprintf(stderr, "Error: %s\n", glewGetErrorString(err)); } glutDisplayFunc(loop_function); This is the only code i had to change for now, but here is the code i used with sfml and displayed my objects in the loop, if i change the value of glClearColor, the window's background does change color : glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glClearColor(255.0f, 255.0f, 255.0f, 0.0f); glLoadIdentity(); sf::Time elapsed_time = clock.getElapsedTime(); clock.restart(); camera->animate(elapsed_time.asMilliseconds()); camera->look(); for (auto i = objects->cbegin(); i != objects->cend(); ++i) (*i)->draw(camera); glutSwapBuffers(); Is there any other changes i should have done switching to glut ? that would be great if someone could enlighten me on the subject. In addition to that, i found out that adding too many objects (that were well handled before with SFML), openGL gives error 1285: out of memory. Maybe this is related. EDIT : Here is the code i use to draw each object, maybe it is the problem : GLuint LightID = glGetUniformLocation(this->shaderProgram, "LightPosition_worldspace"); if(LightID ==-1) cout << "LightID not found ..." << endl; GLuint MaterialAmbientID = glGetUniformLocation(this->shaderProgram, "MaterialAmbient"); if(LightID ==-1) cout << "LightID not found ..." << endl; GLuint MaterialSpecularID = glGetUniformLocation(this->shaderProgram, "MaterialSpecular"); if(LightID ==-1) cout << "LightID not found ..." << endl; glm::vec3 lightPos = glm::vec3(0,150,150); glUniform3f(LightID, lightPos.x, lightPos.y, lightPos.z); glUniform3f(MaterialAmbientID, MaterialAmbient.x, MaterialAmbient.y, MaterialAmbient.z); glUniform3f(MaterialSpecularID, MaterialSpecular.x, MaterialSpecular.y, MaterialSpecular.z); // Get a handle for our "myTextureSampler" uniform GLuint TextureID = glGetUniformLocation(shaderProgram, "myTextureSampler"); if(!TextureID) cout << "TextureID not found ..." << endl; glActiveTexture(GL_TEXTURE0); sf::Texture::bind(texture); glUniform1i(TextureID, 0); // 2nd attribute buffer : UVs GLuint vertexUVID = glGetAttribLocation(shaderProgram, "color"); if(vertexUVID==-1) cout << "vertexUVID not found ..." << endl; glEnableVertexAttribArray(vertexUVID); glBindBuffer(GL_ARRAY_BUFFER, color_array_buffer); glVertexAttribPointer(vertexUVID, 2, GL_FLOAT, GL_FALSE, 0, 0); GLuint vertexNormal_modelspaceID = glGetAttribLocation(shaderProgram, "normal"); if(!vertexNormal_modelspaceID) cout << "vertexNormal_modelspaceID not found ..." << endl; glEnableVertexAttribArray(vertexNormal_modelspaceID); glBindBuffer(GL_ARRAY_BUFFER, normal_array_buffer); glVertexAttribPointer(vertexNormal_modelspaceID, 3, GL_FLOAT, GL_FALSE, 0, 0 ); GLint posAttrib; posAttrib = glGetAttribLocation(shaderProgram, "position"); if(!posAttrib) cout << "posAttrib not found ..." << endl; glEnableVertexAttribArray(posAttrib); glBindBuffer(GL_ARRAY_BUFFER, position_array_buffer); glVertexAttribPointer(posAttrib, 3, GL_FLOAT, GL_FALSE, 0, 0); glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, elements_array_buffer); glDrawElements(GL_TRIANGLES, indices.size(), GL_UNSIGNED_INT, 0); GLuint error; while ((error = glGetError()) != GL_NO_ERROR) { cerr << "OpenGL error: " << error << endl; } disableShaders();

    Read the article

  • Resource not found?

    - by SystemNetworks
    When I write in my terminal, java -jar myJar.jar, it gives me an error "Resource Not found res/playNow.png" When I run it in eclipse, it does not give me any errors about this image. My folder in my eclipse is outside my package called res and inside it are images. This is the full error Exception in thread "main" java.lang.RuntimeException: Resource not found: res/playNow.png at org.newdawn.slick.util.ResourceLoader.getResourceAsStream(ResourceLoader.java:69) at org.newdawn.slick.opengl.InternalTextureLoader.getTexture(InternalTextureLoader.java:169) at org.newdawn.slick.Image.<init>(Image.java:196) at org.newdawn.slick.Image.<init>(Image.java:170) at org.newdawn.slick.Image.<init>(Image.java:158) at org.newdawn.slick.Image.<init>(Image.java:136) at javagame.Menu.init(Menu.java:31) at javagame.Game.initStatesList(Game.java:21) at org.newdawn.slick.state.StateBasedGame.init(StateBasedGame.java:164) at org.newdawn.slick.AppGameContainer.setup(AppGameContainer.java:390) at org.newdawn.slick.AppGameContainer.start(AppGameContainer.java:314) at javagame.Game.main(Game.java:32) I'm using a terminal in my mac. How do I fix the error Resource Not Found? I'm using slick2d!

    Read the article

  • I can not connect to the Internet with cable

    - by Diego Castro
    tengo un computador de escritorio (board: gigabyte h61m, procesador: intel core i3 de 64 bits, ram: ddr3 4 GB) y puedo acceder a internet normalmente desde Windows 7 (mi conexión es por cable directamente al modem (referencias del modem: D-link DSL-2640T)) e instale Ubuntu 11.04 y no puedo acceder a internet, probé con Ubuntu 10.04 (que es el que tengo actualmente instalado) y tampoco funciono no se que debo configurar ni que hacer, simplemente no se conecta, he intentado cambiando de modo automatico a modo manual en ipv4 y colocando los datos correspondientes (dirección IP, máscara de red y servidores de DNS) y no logro conectarme aún, agradezco la ayuda machine traslator Hi, I have a desktop (board: gigabyte h61m, Processor: Intel Core i3 64-bit RAM: 4 GB ddr3) and I can access the internet normally from Windows 7 (my connection is wired directly to the modem (modem references : D-link DSL-2640T)) and install Ubuntu 11.04 and I can not access the internet, I tried Ubuntu 10.04 (which is what I have currently installed) and worked either not set or that I should do, just does not connect, I tried switching from automatic mode to manual mode ipv4 and placing the data (IP address, subnet mask and DNS servers) and I can not even connect, appreciate the help

    Read the article

  • Wecam not detected

    - by Richard
    after much research ang googling, my web cam is still not recognized. In the time of Ubuntu 11.04 it was working fine. I did a fresh install of 11.10 and not more web cam. All the cheese and camera monotor and V4L tests and all failes with "cannot connect to /dev/video0" or equivalent. The output of 'lsusb' shows the webcam Bus 001 Device 002: ID 05a9:2640 OmniVision Technologies, Inc. OV2640 Webcam What I noticed is that neither /dev/v4l nor /dev/video* exists. If I re-install the v4l package all the /dev/video* are created, but no /dev/v4l If I reboot the /dev/video* are NOT created. I think the trouble is that the device are not created at boot time. I have a DELL Inspiron 1525 and until this fresh install the web cam worked fine. Can somebody help ? Thanks a lot Richard

    Read the article

  • configure: error: Could not find libavformat - part of ffmpeg after installing libav from source

    - by Patryk
    I tried to install minidlna on my machine but it appeared to me that it's not in repositories anymore. Well then I decided to compile it myself. After downloading version 1.1.3 I tried to compile but I needed libav headers which I couldn't install via apt - no idea why there has been a lot of broken packages: $ sudo apt-get install libavcodec-dev Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libavcodec-dev : Depends: libavutil-dev (= 6:9.13-0ubuntu0.14.04.1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. Anyways I installed libav 9.13 from source and now I came to this point: $ ./configure ... checking for av_open_input_file in -lavformat... no checking for avformat_open_input in -lavformat... no checking for av_open_input_file in -lavformat... no checking for avformat_open_input in -lavformat... no configure: error: Could not find libavformat - part of ffmpeg but I have installed that! Even in the install log I can see : ... INSTALL libavdevice/libavdevice.a INSTALL libavfilter/libavfilter.a INSTALL libavformat/libavformat.a INSTALL libavresample/libavresample.a INSTALL libavcodec/libavcodec.a INSTALL libswscale/libswscale.a INSTALL libavutil/libavutil.a INSTALL libavdevice/avdevice.h INSTALL libavdevice/version.h INSTALL libavdevice/libavdevice.pc INSTALL libavfilter/avfilter.h INSTALL libavfilter/avfiltergraph.h INSTALL libavfilter/buffersink.h INSTALL libavfilter/buffersrc.h INSTALL libavfilter/version.h INSTALL libavfilter/libavfilter.pc INSTALL libavformat/avformat.h ....

    Read the article

  • Laptop screen blank after login when external monitor is not connected

    - by Ramon Suarez
    Ubuntu does not switch back automatically to only monitor present when booting after disconnecting external monitor. Here's a video showing what happens. I get to the login window and everything looks ok, then I type my password, the desktop image shows up and... everything goes blank. It does not happen when I just login as a guest. When possible I work with my laptop connected to an external screen via the VGA port. The problem comes when I boot the computer without that secondary screen connected: The login screen comes out ok. After login the screen goes black, but I can hear the login sound. If I hit ctr + alt + backwards-delete and login again sometimes it is fixed, but not all. If I log in as a different user everything is OK. Then I log in as my user and sometimes it works. To have a screen I have to plug a monitor. Although I have turned on the laptop display with that monitor on, if I reboot it goes blank again after login, even if I turn off the external monitor before turning off the computer. I've managed to get my screen back with my username after going into recovery mode, but only sometimes. Failsafe would not load after second screen asking me what I wanted to do (no mouse to click nor keyboard working). My computer is a LDLC Aurore BB1-i5 -8 -S1. Which is the configuration file that keeps the information about the monitors using Displays under lightgdm and where is it? I guess if I could edit it I may have a chance :) One of the things I tried following a solution in another post was removing my monitors.xml file, but it does not work and I don't know how to create a good one that I could use now. When doing DISPLAY=:0 xrandrI get: Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) This is the full dmesg after activating sudo xdiagnoseas Bryce sugested. (If you tell me the relevant parts I will paste them here) When conecting the external monitor, only the external will work, although I can see using Displays that the computer thinks that both are working. I've asked the question in Launchpad but have it keeps on expiring without any feedback. In my opinion Ubuntu should be able to detect automatically that there is no external monitor present and switch to the laptop monitor. There's a similar question here, but it does not apply to my case External monitor set as primary even when disconnected from laptop Update: For clarification, the problem happens only with my user and once I log in. I even get to see the screensaver for about a second, and then it goes blank. Tried Bryce's example (see his answer below), but it did not work. This is the info I get from tty1 with Display=:0 xrandr: – Ramon Suarez Jul 9 at 16:36 Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)

    Read the article

  • Postgres 8.4 stackbuilder not run in Ubuntu12.04

    - by vikas
    I have installed Postgres 8.4 in my Ubuntu 12.04 , but after installation it does not run stackbuilder.It also not running from menu bar . How can i run stackbuilder ? edit:I install this from postgres-8.4.run package.It uses a GUI interface.After installing postgres it should run stackbuilder but it not run stackbuilder GUI. This prob is related to ubuntu 12.04 because in 11.04, I have used this application.This question also asked on other forms but there is no solution. Thank you.

    Read the article

  • Flash is not working in Chrome (Crossover Linux is installed)

    - by Jim Ford
    I have google Chrome 8.0.552.237 on Ubuntu 10.10 64-bit and flash is not working, I have tried a variety of methods to install flash, including Firefox flash-aid and the flash-installer package and nothing is working for me. I have even uninstalled and reinstalled chrome to no avail. I get "missing plugin" message where flash plugin should be in a website. What am I missing? I have a variety of plugins returned by jgbelacqua's command: /usr/lib/chromium-browser/plugins/flashplugin-alternative.so /usr/lib/firefox/plugins/flashplugin-alternative.so /usr/lib/flashplugin-installer/libflashplayer.so /usr/lib/iceape/plugins/flashplugin-alternative.so /usr/lib/iceweasel/plugins/flashplugin-alternative.so /usr/lib/midbrowser/plugins/flashplugin-alternative.so /usr/lib/mozilla/plugins/flashplugin-alternative.so /usr/lib/xulrunner/plugins/flashplugin-alternative.so /usr/lib/xulrunner-addons/plugins/flashplugin-alternative.so /usr/share/ubufox/plugins/libflashplayer.so /var/cache/flashplugin-installer/libflashplayer.so I'm not sure which is necessary and which not. I should note tho that my Chromium does have flash and it does work... just not chrome or firefox.

    Read the article

  • Why (not) logic programming?

    - by Anto
    I have not yet heard about any uses of a logical programming language (such as Prolog) in the software industry, nor do I know of usage of it in hobby programming or open source projects. It (Prolog) is used as an academic language to some extent, though (why is it used in academia?). This makes me wonder, why should you use logic programming, and why not? Why is it not getting any detectable industry usage?

    Read the article

  • samsung netbook n102sp problems with ubuntu 12.04 does not recognize intel 3150 hd high resolution

    - by foxtier494
    hello friends I have a samsung netbook n102sp atom processor 1.6, 2GB ddr3 ram and a intel 3150hd chiset chart, well the problem is the following the regular work pc has audio, lan, wi-fi reconose the video but I only lansa the resolution of 800 x 600 and I can not upload that's in the details of the computer I get into graphics (VESA: Intel ® Graphics XX) and I can not see videos because they only hear the audio and I use the vlc player I investigate intel 3150hd drivers and try to install layered but I was not please someone help me because it's an ugly work 800 x 600 and I can not see videos please, if anyone knows how to install the driver from Intel that are on the web please guide me when applied dpkg-s xserver-xorg-video-intel tells me that this driver installed ( XvMC "XVideo Motion Compensation" drivers for i810/i815 and i9xx and newer chipsets.)

    Read the article

  • ibus-avro for Bengali not working in Ubuntu 13.10

    - by Faisal Haq Salafi
    I've upgraded from Ubuntu 13.04 to Ubuntu 13.10, then ibus-avro for Bengali is not working. I've tried to reinstall ibus but no success. ibus-avro Icon is showing but not sure whats the problem. It should be working like this... The icon on top is showing properly, but it's not working. May be there are some communication problem. So currently after upgrade it's like this... As we can see the Bangla text is not appearing... I've tried these steps...But no hope. rm ~/.candidate-selections.json and sudo killall ibus-daemon ibus-daemon -vx Then /usr/bin/env gjs --include-path=/usr/share/ibus-avro /usr/share/ibus-avro/main-gjs.js

    Read the article

  • Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block 0,0

    - by AlbertK
    I've read the following two solution: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) kernel panic not syncing vfs unable to mount root fs on unknown block oo swapper not tainted ,but still got the same problem. Here's my full error code: [1.902269] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [1.902299] Pid: 1, comm: swapper/0 Not tainted 3.2.0-29-generic #46-Ubuntu [1.902325] Call Trace: [1.902348] [<ffffffff81640ec8>] panic+0x91/0x1a4 [1.902373] [<ffffffff81cfc01e>] mount_block_root+0xdc/0x18e [1.902400] [<ffffffff81002930>] ? populate_rootfs_wait+0x300/0x9d0 [1.902426] [<ffffffff81cfc257>] mount_root+0x54/0x59 [1.902450] [<ffffffff81cfc3c9>] prepare_namespace+0x16d/0x1a6 [1.902476] [<ffffffff81cfbd63>] kernel_init+0x153/0x158 [1.902501] [<ffffffff81664034>] kernel_thread_helper+0x4/0x10 [1.902527] [<ffffffff81cfbc10>] ? start_kernel+0x3bd/0x3bd [1.902551] [<ffffffff81664030>] ? gs_change+0x13/0x13 I don't know what these error messages mean at all, but I hope that these will help to solve this problem I'm running Ubuntu 12.04. Thanks for any advice.

    Read the article

  • How can I fix the "TERM environment variable not set" warning in eclipse

    - by Robert
    I'm running ubuntu 12.04 LTS and working with eclipse (juno) on a c++ project. I keep getting "TERM environment variable not set" in the console while trying to run the program. I realize this means the variable needs to get set. My question is what should it be set to and how do I set it? I've read that it should be 'xterm' in a few places. So I added export TERM=xterm in my .profile and while eclipse stopped giving me the warning, instead it would output unreadable garbage everynow and then (not a side effect of the program). It did display the program output but intermixed were weird characters. This leads me to believe it's not 'xterm' I should be setting TERM to. Or I'm setting it in an incorrect way. Any help is appreciated. Sample output: **TERM environment variable not set.** Please make a selection ----------------------- 1. Create a budget 2. Edit a budget 3. Display a budget 4. Save a budget 5. Load a budget 6. Exit What is your selection: 1 **TERM environment variable not set.** Enter the name of your budget: etc The program continues to execute as expected but the message is highly annoying As someone has commented, I do use system("clear") which is likely the source of the warning? Either way, is this likely just an eclipse issue or something I can fix in ubuntu/linux

    Read the article

  • .wine-pipelight folder not present

    - by DaimyoKirby
    Following the instructions on the pipelight installation page, I installed pipelight on Ubuntu 14.04. However, upon opening firefox the .wine-pipelight folder isn't present in my home folder, and I get the following errors: [PIPELIGHT:LIN:unknown] attached to process. [PIPELIGHT:LIN:unknown] checking environment variable PIPELIGHT_SILVERLIGHT5_1_CONFIG. [PIPELIGHT:LIN:unknown] searching for config file pipelight-silverlight5.1. [PIPELIGHT:LIN:unknown] trying to load config file from '/home/alden/.config/pipelight-silverlight5.1'. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:427:checkSilverlightGraphicDriver(): error in execlp command - probably silverlightGraphicDriverCheck not found or missing execute permission. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:441:checkSilverlightGraphicDriver(): GPU driver check - Your driver is not in the whitelist, hardware acceleration disabled. [PIPELIGHT:LIN:silverlight5.1] using wine prefix directory /home/alden/.wine-pipelight. [PIPELIGHT:LIN:silverlight5.1] checking plugin installation - this might take some time. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:374:checkPluginInstallation(): error in execvp command - probably dependencyInstaller/sandbox not found or missing execute permission. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:384:checkPluginInstallation(): Plugin installer did not run correctly (exitcode = 1). [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:108:attach(): plugin not correctly installed - aborting. I've reinstalled quite a few times and ran through many of the common fixes offered on the pipelight Launchpad pages and here on AskUbunta and still it fails to run. Is there a reason why this folder isn't present, or why I'm getting these errors? Edit: Oddly enough, the .wine-pipelight folder is created wtih I open Nitro, although this still doesn't fix the issue.

    Read the article

  • Update Manager Not working Fail to Download Repository Information

    - by user51564
    When I try to update, I get this error: Failed to Download your repository information Check your internet connection W:GPG error: http ://ppa.launchpad.net oneiric Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 4874D3686E80C6B7, W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/oneiric/main/source/Sources 404 Not Found W:Failed to fetch http://ppa.launchpad.net/pmcenery/ppa/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found E:Some index files failed to download. They have been ignored, or old ones used instead.

    Read the article

  • xen-create-image does not create inird or initramfs image and domU does not starts with system image

    - by user219372
    I have Fedora 19 as Dom0. To create image I run # xen-create-image --hostname=debian-wheezy --memory=512Mb --dhcp --size=20Gb --swap=512Mb --dir=/xen --arch=amd64 --dist=wheezy After generation finished I start vm and see: # xl create /etc/xen/debian-wheezy.cfg Parsing config from /etc/xen/debian-wheezy.cfg libxl: error: libxl_dom.c:409:libxl__build_pv: xc_dom_ramdisk_file failed: No such file or directory libxl: error: libxl_create.c:919:domcreate_rebuild_done: cannot (re-)build domain: -3 In the /etc/xen/debian-wheezy.cfg i have # # Kernel + memory size # kernel = '/boot/vmlinuz-3.11.2-201.fc19.x86_64' ramdisk = '/boot/initrd.img-3.11.2-201.fc19.x86_64' and ls -1 /boot/*201* shows /boot/config-3.11.2-201.fc19.x86_64 /boot/initramfs-3.11.2-201.fc19.x86_64.img /boot/System.map-3.11.2-201.fc19.x86_64 /boot/vmlinuz-3.11.2-201.fc19.x86_64 Then if I fix ramdisk directive in .cfg file to /boot/initramfs-3.11.2-201.fc19.x86_64.img vm will start but os inside will not boot. In a tail of xl console I get [ OK ] Reached target Basic System. dracut-initqueue[130]: Warning: Could not boot. dracut-initqueue[130]: Warning: /dev/disk/by-uuid/085883ad-73ca-45cc-8bc5-e6249f869b26 does not exist dracut-initqueue[130]: Warning: /dev/fedora/root does not exist dracut-initqueue[130]: Warning: /dev/fedora/swap does not exist dracut-initqueue[130]: Warning: /dev/mapper/fedora-root does not exist dracut-initqueue[130]: Warning: /dev/mapper/fedora-swap does not exist dracut-initqueue[130]: Warning: /dev/xvda2 does not exist Starting Dracut Emergency Shell... Warning: /dev/disk/by-uuid/085883ad-73ca-45cc-8bc5-e6249f869b26 does not exist Warning: /dev/fedora/root does not exist Warning: /dev/fedora/swap does not exist Warning: /dev/mapper/fedora-root does not exist Warning: /dev/mapper/fedora-swap does not exist Warning: /dev/xvda2 does not exist Generating "/run/initramfs/sosreport.txt" Entering emergency mode. Exit the shell to continue. Type "journalctl" to view system logs. You might want to save "/run/initramfs/sosreport.txt" to a USB stick or /boot after mounting them and attach it to a bug report. dracut:/# .img files in /xen/domains/debian-wheezy exists and listed in disk section of debian-wheezy.cfg So what should i do? Update: I've found that xl does not mount images. In debian-wheezy.cfg I have that: root = '/dev/xvda2 ro' disk = [ 'file:/xen/domains/debian-wheezy/disk.img,xvda2,w', 'file:/xen/domains/debian-wheeze/swap.img,xvda1,w', ] And there is no /dev/xvda* or /dev/sda* or /dev/hda* files in VM.

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • DataContractSerializer: type is not serializable because it is not public?

    - by Michael B. McLaughlin
    I recently ran into an odd and annoying error when working with the DataContractSerializer class for a WP7 project. I thought I’d share it to save others who might encounter it the same annoyance I had. So I had an instance of  ObservableCollection<T> that I was trying to serialize (with T being a class I wrote for the project) and whenever it would hit the code to save it, it would give me: The data contract type 'ProjectName.MyMagicItemsClass' is not serializable because it is not public. Making the type public will fix this error. Alternatively, you can make it internal, and use the InternalsVisibleToAttribute attribute on your assembly in order to enable serialization of internal members - see documentation for more details. Be aware that doing so has certain security implications. This, of course, was malarkey. I was trying to write an instance of MyAwesomeClass that looked like this: [DataContract] public class MyAwesomeClass { [DataMember] public ObservableCollection<MyMagicItemsClass> GreatItems { get; set; }   [DataMember] public ObservableCollection<MyMagicItemsClass> SuperbItems { get; set; }     public MyAwesomeClass { GreatItems = new ObservableCollection<MyMagicItemsClass>(); SuperbItems = new ObservableCollection<MyMagicItemsClass>(); } }   That’s all well and fine. And MyMagicItemsClass was also public with a parameterless public constructor. It too had DataContractAttribute applied to it and it had DataMemberAttribute applied to all the properties and fields I wanted to serialize. Everything should be cool, but it’s not because I keep getting that “not public” exception. I could tell you about all the things I tried (generating a List<T> on the fly to make sure it wasn’t ObservableCollection<T>, trying to serialize the the Collections directly, moving it all to a separate library project, etc.), but I want to keep this short. In the end, I remembered my the “Debug->Exceptions…” VS menu option that brings up the list of exception-related circumstances under which the Visual Studio debugger will break. I checked the “Thrown” checkbox for “Common Language Runtime Exceptions”, started the project under the debugger, and voilà: the true problem revealed itself. Some of my properties had fairly elaborate setters whose logic I wanted to ignore. So for some of them, I applied an IgnoreDataMember attribute to them and applied the DataMember attribute to the underlying fields instead. All of which, in line with good programming practices, were private. Well, it just so happens that WP7 apps run in a “partial trust” environment and outside of “full trust”-land, DataContractSerializer refuses to serialize or deserialize non-public members. Of course that exception was swallowed up internally by .NET so all I ever saw was that bizarre message about things that I knew for certain were public being “not public”. I changed all the private fields I was serializing to public and everything worked just fine. In hindsight it all makes perfect sense. The serializer uses reflection to build up its graph of the object in order to write it out. In partial trust, you don’t want people using reflection to get at non-public members of an object since there are potential security problems with allowing that (you could break out of the sandbox pretty quickly by reflecting and calling the appropriate methods and cause some havoc by reflecting and setting the appropriate fields in certain circumstances. The fact that you cannot reflect your own assembly seems a bit heavy-handed, but then again I’m not a compiler writer or a framework designer and I have no idea what sorts of difficulties would go into allowing that from a compilation standpoint or what sorts of security problems allowing that could present (if any). So, lesson learned. If you get an incomprehensible exception message, turn on break on all thrown exceptions and try running it again (it might take a couple of tries, depending) and see what pops out. Chances are you’ll find the buried exception that actually explains what was going on. And if you’re getting a weird exception when trying to use DataContractSerializer complaining about public types not being public, chances are you’re trying to serialize a private or protected field/property.

    Read the article

  • library put in /usr/local/lib is not loaded

    - by IARI
    Let me state in advance: One might think this question would is for server fault, but I think is is Ubuntu (config) specific. In short: I have put libwkhtmltox.so in /usr/local/lib as stated in installation instructions linked below, but it appears the library is not loaded. I am trying to install php-wkhtmltox, a php extension for wkhtmltox on my local desktop (Ubuntu 12.04). I have extracted the source and changed to the corresponding directory. After running phpize, ./configure fails at checking for libwkhtmltox support... yes, shared not found configure: error: Please install libwkhtmltox I suspect the reason the library is not loaded is that the path is not checked!? how do I proceed? Here are instructions I followed: http://davidbomba.com/index.php/2011/08/04/php-wkhtmltox/ http://roundhere.net/journal/install-wkhtmltopdf-php-bindings/

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >